BPM error After transports

Hi
We have trasported all  our objects from Dev to QA, after a cache refresh in QA server we found that some BPM's are in state 0 and some are in status 99. There are no cache refresh error in SXI_CACHE "cache contents are up-to-date" and there are no errors when checked through SLD cache notifications.
The BPM's which are having status 99 giving following error
S     --- Translating step type 'RECEIVE' with ID '3' ---
E     No container definition available
S     --- Translating step type 'SWITCH' with ID '7' ---
E     Syntax error in expression Line1 Ext. ID64788F0009A411DAC1A5D943C2C9A7A9
E     The exception occurred (program: CL_SAI_SWF_RULE
E     Container element 'GEN_NRQ' does not exist
S     --- Translating step type 'TRANSFORM' with ID '5' ---
S     --- Translating step type 'SEND' with ID '17' ---
S     --- Translating step type 'SEND' with ID '24' ---
I     Language not set. Using system default E
All these BPM's are working fine in dev environments.
Any idea , inputs on how to resolve this.
Regards
Prahllad

Hi Michal
The transport mechanisim is file import/export. We imported repository objects at namespace level and directory objects at scenario level. Just give some more input on this issue, before transport of all our objects (around 170) we did a sample tranport of only one interface object (both directory and repository objects)that worked perfectly.
Then we imported rest of all our objects and at this point we got cache refresh error in SXI_CACHE (communication error). We set the "No Timeout" option in the RFC destination INTEGRATION_DIRECTORY_HMI and all cache contents got re-freshed. After this we found only some BPM's are in status 0 but most of them in status 99.
I verified the container elements are present in my Dev BPM it is present and it works correctly. Hope this might give some clue on where the issue could be.
Regards
Prahllad

Similar Messages

  • BPM error after transport

    hi all,
    i get the following error after transport on Q system:
    "No object type found for this message; check the activation of the corresponding process"
    the trace gives me this explanation:
    "could not create BPE proxy for message, no XML object definition found for message 48C56A8CD7D615EEE10000000A9E014F"
    In SXI_CACHE the business process has status zero, business process and everythng else in transport is active.
    So what else can i do to fix that bug?
    Thanks
    Stefan

    HI,
    Then check the error log carefully. Problem might be some else. If not try to reimport the transport with the help of BASIS.
    Also check the status of check table in quality. Is it active?
    All ur objects are in single TR? If not the u have to move check table TR first and then later objects TR.
    If nothing works then include all the objects in another TR and transport. make sure all are active.
    Thanks,
    Vinod.

  • Error after transport of Virtual Cube with Services

    Hi All,
    would any body can suggest me how we can change the source system assignment in QA or Production client for virtual Cube with Services.
    A virtual cube is created with Services using the settings for RFC and using the logical source system. however after transporting the same to the QA system the Logical Source System has not changed and thus it is giving error " Error occured while determining target system for the logical system" would any body can suggest me how i can change the logical source system assignment in QA system for Virtual Cube with services.
    Points would be rewarded appropriately.
    Cheers
    Noor

    Hi Noor,
    Check this link, it may help you.
    Re: Transport issue - Source system does not exist
    Regards,
    Vijay G.

  • Unable to find resource error after transport

    Hello,
    there is a strange error happening with some mapping after transporting the content of some namespaces from Dev to Q using file (client) export import.
    We already tried the scenario successul on Q, but after some reimports of changes (which still work on Dev) we get the following error in the "request message mapping" step:
    "RESOURCE_NOT_FOUIND"
    Unable to find resource .............. in the following software component versions: ........
    However the mapping is there and can be tested. Any idea on this?

    But last time one day later the scenario was running fine. Could that really be a problem with cache update?
    If all the required objects are present in the QA environment and are active....then yes it can be a problem with the Cache.
    I hope that no error was encountered (or import was done properly) during the import/ reimport.
    Regards,
    Abhishek.

  • Error after transport:'Foriegn key generation error'

    Hi ,
    Iam getting the below error at transport in quality
    Foreign key generation error for field 'ZZEVV_FR_KONX-KNUMH'
    Thanks
    Edited by: chidambar dixit on Jul 25, 2008 8:25 AM
    Edited by: chidambar dixit on Jul 25, 2008 8:26 AM

    HI,
    Then check the error log carefully. Problem might be some else. If not try to reimport the transport with the help of BASIS.
    Also check the status of check table in quality. Is it active?
    All ur objects are in single TR? If not the u have to move check table TR first and then later objects TR.
    If nothing works then include all the objects in another TR and transport. make sure all are active.
    Thanks,
    Vinod.

  • BPM error after SP 14

    Hi,
    I have a strange problem. Since we upgrade to SP14 we have porblems with BPMs including a Message Switch like this example: SQLResponse./p1:MT_SQL_QUERY_response/StmName_response/row/VORGANGS_SCHLUESSEL = 300
    on XI side everything works fine (test and activate) but on R3 side of XI (transaction SXI_CACHE) this BPMs result with error: 'VORGANGS_SCHLUESSEL' is not a component of data object 'PAYLOAD' - I have the similiar BPM on SP13 and it works fine...
    Any idea or same problem?
    THX Matt
    --> I solve it on my own --> with SAP Note 890760
    Message was edited by: Matthias Boettger

    Hi Michal
    The transport mechanisim is file import/export. We imported repository objects at namespace level and directory objects at scenario level. Just give some more input on this issue, before transport of all our objects (around 170) we did a sample tranport of only one interface object (both directory and repository objects)that worked perfectly.
    Then we imported rest of all our objects and at this point we got cache refresh error in SXI_CACHE (communication error). We set the "No Timeout" option in the RFC destination INTEGRATION_DIRECTORY_HMI and all cache contents got re-freshed. After this we found only some BPM's are in status 0 but most of them in status 99.
    I verified the container elements are present in my Dev BPM it is present and it works correctly. Hope this might give some clue on where the issue could be.
    Regards
    Prahllad

  • Master Data activation error after transport

    Hi,
    we have a problem in a custom master data. In development system we add 2 navigation attribute to the master data and then we transport in quality system.
    After the transportation of the IO the master data bacame inactive in quality and there is no way to reactivate them.
    The message error is the following:
    Charateristic ZAA_COB: Navigation attribute ZAA_COB__ZCTB00001 switched on (-> N.B long text)
    Characteristic ZAA_COB: Size of X/Y table does not fit P/Q table
    Error when activating InfoObject ZAA_COB
    We tryed with Tx: RSRV but the check produces dump error
    We tryed with a second CR with the only IO involved but the error was the same.
    We cannot delete the master data content.
    Any suggestion?
    Thanks
    Alberto

    we have a problem in a custom master data. In development system we add 2 navigation attribute to the master data and then we transport in quality system.
    After the transportation of the IO the master data bacame inactive in quality and there is no way to reactivate them.
    The message error is the following:
    Charateristic ZAA_COB: Navigation attribute ZAA_COB__ZCTB00001 switched on (-> N.B long text)
    Characteristic ZAA_COB: Size of X/Y table does not fit P/Q table
    Can you look up OSS or SDN on this particular message " Size of X/Y table does not fit P/Q table".
    Error when activating InfoObject ZAA_COB
    We tryed with Tx: RSRV but the check produces dump error
    This obviously means something is wrong. Take help of BASIS folks too to understand the Short-Dump.
    We tryed with a second CR with the only IO involved but the error was the same.
    We cannot delete the master data content.
    Since its Test, could you delete the data in all InfoProviders that use this InofObject, then, Delete Master Data and then re-transport. Later, load all these InfoProviders. Its one option.
    Obviously all the involved attribute are already transported in Test system. I tryed to adjust with se14 the M (view), X (SID) and P table of the master data tables. Now I have the two attribute only in the attribute tab of the IO but in all the tables they disappear.
    Did you do the "S-table too". not that it matters, since you are already there, you can complete it. Also, don;t get tempted to Delete Master Data from SE14 no matter what.
    I tryed to re-transport but i have always the same error.
    I already gave you option-1 above. Here is my thinking.
    Option-2: Go to DEV. Open the main InfoObejct in change mode. Go to the Attributes tab. There, there will be a small box where you can give numbers. Why don't you re-number them from "1" till the end. This is the sequence of how the attributes show up in pop-up boxes.
    ext, run the RSRV test on the InfoObject in DEV.
    After you do this, collect this InfoObject in a new transport and move it to Test.
    I am not sure it wil solve the problem, but its worth a try.
    But look into OSS notes on specific error message that you got. If I think of anything else, I will get back to you.
    Uday-Ram Chamarthy

  • 'Screen does not exist' error after transported to Quality server.

    I have a report program which is working fine in development server. It is transported to quality server and when executed it throws dump. There is a CALL SCREEN statement in the program and the dump shows screen 1001 does not exists. I checked the program on quality server and when i double clicked on the screen number, it tells screen 1001 does not exist and do you want to create??. I rechecked the program in Development server and confirmed everything is active and have been catched in the transport request. When I checked with the basis guy, he said there was a component conflict error with the request while transporting and he overrided it.
    Please tel me what should I do to solve this issue. Its very urgent. Please help.
    Thanks
    Johan

    Hi
    You seem to have run into some trouble with transports. Did someone perhaps develop this report in the QA  server?
    I would suggest this:
    In SE80. display your report. Then in the hierarchy on the left, right click on your report and select 'write transport entry' . This option will ask you to create a new transport for your report and all objects inside it. Take that transport to the QA server. It should include the entire report, including screens.
    If you have trouble importing into the QA server, please provide the transport logs here.

  • Error after transporting a process chain

    Hi Experts,
    I am facing an issue regarding remote process chain variant, as i have added it in an existing process chain, Now its throwing an error in Quality and the changes are also not visible..Please help me out in finding a solution..
    Regards
    Arpita

    Hi,
    when i am transporting it to Quality or production system, that variant for remote process chain is not visible. I have tried it many times. Connectivity between the systems are fine.
    I have kept APO System as destination
    And Destination for callback  BW System..
    Please let me know if i am wrong..
    Regards
    Arpita
    Edited by: Arpitac on May 25, 2011 8:51 AM

  • BPM error after PI 7.31 SP12 upgrade

    We have a bpm scenario where we send a request to a web server and it sends a response message if successful request is sucessfuly processed (synchronous) or else sends us a fault message saying the server is busy at that time.
    Now this scenario was working fine before the upgarde, however in the upgarded environment we get an error message:

    Opened message with SAP.
    SAP's response:
    Thanks for XPI inspector traces. We have analyzed and found that
    NPE(NullPointerException) is happening while converting the SOAP fault
    into an Application fault. We have also gone through the
    implementation part. It looks like the variable 'xer' is not properly
    handled. Hence we are planning to fix it. So we will get back to you
    with an update on this soon. Hope this is fine with you.
    Will keep you all posted with SAP's response.
    Thanks.

  • Error after transporting the web page

    Hi Experts,
    I exported the whole site and its pages from dev to poc server. The problem is the site and page gets transported but the contents of the page are not getting transported.. In the page i had inserted an iview(which is present on both the servers).
    When i open the transported page it given an error saying..
                         "  500 Internal Server Error
    The system could not find a published version of the requested page.
    To avoid this error please go in design mode and publish at least one of the page variants. "
    Not been able to figure out the reason for it.
    Can somebody help me out with this matter.. ??

    check the id of that iview which is not transported.  if it start with com.sap, then change it to some other
    portal object which starts with com.sap as their ID cannnot be transported.
    Raghu

  • Error after transport: "User defined field Management hanged"

    i have create the document lines table through dot net code ,after creating tables user defined field management set up hanged .if it is possible the re solution please tell me.
    Srinivasan

    Hi S Thirumurugan ,
    You need to create the table using the SDK...if not the User defined field manangement setup cannot open it table will be inconsistant constraint with the table...
    For adding the table through SDK check the SDK Help...
    With regards,
    MadhuSudhana Rao.G

  • Authorization error after transport

    Dear all,
    I am quite new to SAP Sec, I have modified an existing derived role to add additional authorization and generated proflie and then transported to a other system.
    But when I check in the test system, The Authorization tab has a warning symbol with yellow color and profile field is empty. Please advise, I have missed anything ?
    Regards,
    Soyunee
    Edited by: soyunee on Jun 22, 2010 3:45 PM

    Soyunee,
    First of all why are you changing the derived role directly? Any authorization changes should be done in master role and pushed down to derived roles.
    Yellow fields obviously it would be open fileds. See to that when you generate all field are green. Then finally do user comparsion,then only the profile gets added to the user id. and then transport.
    Note: Values need to come from Su24. In auth tab you should not have manual & change objects.
    Thanks,
    Sri

  • Runtime Error 9 on WAD after transports

    Hi Experts,
    I am << Run time error : 9 Subscript out of Range >> and it throws me out of WAD.
    This is happening only in QA after the transports, but Dev is working fine.
    I have checked the notes and steps suggested in the previous discussions but none of it is helped.
    Please if any one has dealt with this error before and resolved it please help.
    Thanks
    Sarah

    This is the only web template in QA and this was the first transport for the template.
    I am unable to even get what the error actually is to debug it further other than the message.
    I still continue to get the error even after re-import infact even Dev web tempplate also gives the same error after transport.
    If anyone has had this error before please suggest.
    Thanks
    Sarah
    Message was edited by: Sarah

  • 'Transport Monitor' error after archive and install....?

    The application "Transport Monitor" could not be launched because of a shared library error: "8<Transport Monitor><Transport Monitor><HotSyncLib.PPC>"
    Thats the error reading I get after I performed an archive and install of 10.4.6.
    Any ideas?

    Hello!
    A quick search of the KB came up with this article, hopefully it'll help you out!
    http://docs.info.apple.com/article.html?artnum=25578
    Name a Mac, and I've used it. I Promise.   Mac OS X (10.4.6)  

Maybe you are looking for