BPM error: interface are not same

Hi,
In my BPM I opened a Asy/syn bridge. When I close it I get the error: A interface and B interface are not the same.
A is the interface (synch) which I used on the sender side when I opened the bridge. B is the aynch. abs. interface for the receiver side for which I defined a container.
A interface response and B interdace request are the same. Why do I get this error? Any idea.

Make sure that you have created a SYNC interface (ABS) which refers to the Request and response messages....and then the COntainers in your BPM refer to these request and response messages only!
The COntanier should have the same message types as they are in the SYNC ABS message Interface..... as of now they are different and hence the error.
Just have a look at the BPM pattern which I mentioned in previous reply and you will know which message has to be include in the Receive and Send step.
Regards,
Abhishek.
Edited by: abhishek salvi on May 4, 2010 1:56 PM

Similar Messages

SSRS 2008 Column Chart with Calculated Series (moving average) "formula error - there are not enough data points for the period" error

I have a simple column chart grouping on 1 value on the category axis. For simplicity's sake, we are plotting $ amounts grouping by Month on the category axis. I right click on the data series and choose "Add calculated series...". I choose moving average. I want to move the average over at least 2 periods.
When I run the report, I get the error "Formula error - there are not enough data points for the period". The way the report is, I never have a guaranteed number of categories (there could be one or there could be 5). When there is 2 or more, the chart renders fine, however, when there is only 1 value, instead of suppressing the moving average line, I get that error and the chart shows nothing.
I don't think this is entirely acceptable for our end users. At a minimum, I would think the moving average line would be suppressed instead of hiding the entire chart. Does anyone know of any workarounds or do I have to enter another ms. connect bug/design consideration.
Thank you,
Dan

I was having the same error while trying to plot a moving average across 7 days. The work around I found was rather simple.
If you right click your report in the solution explorer and select "View Code" it will give you the underlying XML of the report. Find the entry for the value of your calculated series and enter a formula to dynamically create your periods.
<ChartFormulaParameter Name="Period">
<Value>=IIf(Count(Fields!Calls.Value) >= 7 ,7, (Count(Fields!Calls.Value)))</Value>
</ChartFormulaParameter>
What I'm doing here is getting the row count of records returned in the chart. If the returned rows are greater than or equal to 7 (The amount of days I want the average) it will set the points to 7. If not, it will set the number to the amount of returned rows. So far this has worked great. I'm probably going to add more code to handle no records returned although in my case that shouldn't happen but, you never know.
A side note:
If you open the calculated series properties in the designer, you will notice the number of periods is set to "0". If you change this it will overwrite your custom formula in the XML.

Incident management error: You are not assigned a Business Partner

Hi
I am facing a problem while creating message as below
error: You are not assigned a Business Partner
I created the BP. which has clear identification too.
Even this BP is maintained as Employee too.
Expecting ur valuable suggestions.
Regards,
Siva

Hi
Was this issue ever resolved?
I have the same problem.
I have business partners, also created as employees with their user id held in the Identification tab of the employee view in BP.
In the business partner Identification tab, they have the system ID>Installation No>client>user id maintained
When I go into solman_workcenter I see the message 'you are not assigned a business partner' and I cannot see any of the tickets assigned to me.
Has anyone had the same issue and resolved it?
Thanks for your help.
Ashley

BP671 object currencies are not same in budget hierarchy

Hi,
We have set object curency in budget profile for budget currency and availablitity control.
Although all the wbs, networks and production orders use the same object currency, we are still getting the error "BP671 object currencies are not same in budget hierarchy"
Any solution / ideas to solve this error ?
Thanks,
Manohar

Thanks for your reply.
But i have already checked all three option in Query designer and executed in Bex Analyzer.
once again i am telling -(first time all posted and without posted node are apperaring but after swapping the axis in analyzer sheet only posted nodes are appearing)
Any other option is require for this please tell.

Infopath Form error - validation errors that are not in the current view?

Hey Experts,
I have a Sharepoint 2010 server running on Server 2008. We have a list that has a custom form created using infopath for editing and new creations.
The problem appeared after a server restart.
Users can no longer create a new item in the list when they do they get this error:
The form contains the following errors:
Field or group: my:Author
Error: Cannot be blank
When I try and preview it in infopath2010 it also does the same thing but provides a more detailed error:
Infopath cannot submit the form because it contatains validation errors that are not in the current view. Errors are marked with a red astrick or red dashed boarder.
If you cannot find an error in otherviews, there might be a problem with the forms design.
I checked all thru the form for my:Author field and can't find it on the page as a control or in the list of fields. Any recommendations?
Thanks!

Didn't know you also created this as a thread. If you send me a direct email in the future, please let me know you also created a thread so that I can answer publicly to help others and to get credit for the time/effort spent. Thanks.SharePoint Architect || Microsoft MVP ||
My Blog
Planet Technologies ||
SharePoint Task Force

Error messages are not posted into ECH using collect method

In asynchronous interface, Error messages are not posted into tcode:ECH_MONI_SEL using collect method.
In the collect method, passing software component version,business process and error messages.but its not posted into ech and ppo.

Hi,
Have you created the FEH class for the proxy. In that, from within the PROCESS method, when there is an error you will be placing those errors into a table and this needs to be passed to the COLLECT method.
CALL METHOD i_ref_registration->collect
   EXPORTING
     i_single_bo      = input
     i_component      = 'ZSWC'   "Software component defined while FEH customisation
     i_process        = 'ECH_BP' "ECH Business process defined while FEH customisation
     i_error_category = lc_errcat
     i_main_message   = wa_error
     i_messages       = lt_error
     i_main_object    = wa_object.
Here while populating the wa_object, the objtype field should be populated with the object type defined while FEH customization.
If all these things are done, then this should post the error.
Regards,
Abijith

Error Interface Mapping Not found..

Hi Friends,
I am simply using file to ABAP proxy scenario.
I am getting error as : This I am getting while test my configuration at Scenario level Tools - > Test Configuration..
Interface Mapping :
Runtime error
com.sap.aii.utilxi.misc.api.BaseRuntimeException thrown during application mapping com/sap/xi/tf/_MM_Source_Target_Proxy_: Parsing an empty source. Root element expected!
Plz help.
Regard
Deepak Sodhi

Hi Rajesh,
I am keeping the file as it is from Meassage mapping SRC File..
Message Mapping is giving me no error..
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_Source_Proxy xmlns:ns0="https://tcsfenest/test">
   <EmpId>315143</EmpId>
   <EmpName>Deepak Sodhi</EmpName>
   <EmpOffc>Gurgaon</EmpOffc>
</ns0:MT_Source_Proxy>
Only at the time of Testing configuration Environment -> Test Scenario.
Its giving me error Interface mapping not found.. My strucuture is flat.
DT - Complex type
Empid element string
Empname element string
Empoffc element string
Please help to resolove this issue.
Regards
depak

Mapping Error: Mappings are not required for this Integrator

Hi,
when I created my upload integrator with the Desktop Integrator Manager (12.1.2) I am not able to attach a mapping to it. I get the following error:
Mapping Error: Mappings are not required for this Integrator because the ability to download information has not been enabled.
Does anyone know what I've missed?
cheers
Jeroen

Hi ,
Without creating the content if you are trying to do mapping this error will come.
Solution:
Create the content and then do mapping..
Regards,
Sreekanth.S
Edited by: user12045904 on Dec 9, 2010 10:55 PM

JSF: Error Message are not getting cleared

Hi,
I am facing some problem with error messages in JSF.
Here is what I am doing
1. User submits a form, server validates and sends back the error to the client error message added to Faces Context.
2. User checks the messages, changes the input and submits. assuming everything is correct now.
3. On server, it validates and writes data to response for download using the following code.
FacesContext faces = FacesContext.getCurrentInstance();
    HttpServletResponse response = (HttpServletResponse)faces.getExternalContext().getResponse();
    DownloadResponse.sendDownload( response, is, fileName );
    faces.responseComplete();
}4. It shows the download popup to download the file. The problem here is that error message are not getting cleared off. User can still see the error message on the screen.
It seems I am missing something in JSF req-response life cycle. Anyone please point out the mistake.

SudhirMongia wrote:
4. It shows the download popup to download the file. The problem here is that error message are not getting cleared off. User can still see the error message on the screen. Wrong. The problem is that the view is not rerendered, which makes sense because you are not sending view content to the browser but your file.
Your real question probably is: how do I cause a file download and still rerender the view afterwards to show the results? To that I myself do not have the answer unfortunately, but I have seen that question come by a few times already, so doing some searches in these forums may yield you an answer.

Error: You are not one of the possible agents of task 'WS99900032'

Hi frnds,
I have copied the std leave request workflow WS12300111 into WS99900032 and assigned in the SPRO setting. The approvers are determined using the workflow rule (PFAC) and its not determined from Org Management. But when i tried to apply leave, its throwing me the error You are not one of the possible agents of task 'WS99900032'.
Can anyone give me solution to solve it?
thanks,
Suganya.

You are not one of the possible agents of task 'WS99900032'
You need to refresh the organizational environment and then execute the workitem
1. First make the workflow tempalte as General task and then
Goto PFTC ---> enter the workflow tempalte number by selecting workflow template ---> open in display mode and on menu Addtional Data ---> agent assignment ---> Maintian ---> select General task
2. Goto SBWP -
> Seetings -
>workflow settings -
> refresh ornozational environment and then try to execute the workitem

Business Rule error: Accounts are not available in the rule table

Hi everybody,
I have a problem running the Business Rule for the profit/loss copy to the equity account.
The Business Rule I set reads from all P&L accounts, P&L specific flow, acual category, all datasources and then it writes everything keeping the source settings apart from the account destination (the equity profit/loss account) and the flow destination (I write in two different flows, so the rule is made up of two equal lines differing only in the flow destination). "PROFIT" is the ID I chose.
Then I created the related script logic (ID=CALCACCOUNT):
*RUN_PROGRAM CALC_ACCOUNT
CATEGORY_M = %CATEGORY_M_SET%
CURRENCYLABEL = %CURRENCYLABEL_SET%
TID_RA = %TIME_SET%
CALC=PROFIT
*ENDRUN_PROGRAM
Finally, the prompt ( process chain: CPMB/RUNCALCACCOUNT):
PROMPT(SELECTINPUT,,,,"CATEGORY_M,CURRENCYLABEL,TIME")
TASK(/CPMB/RUNCALCACCOUNT_LOGIC,SUSER,%USER%)
TASK(/CPMB/RUNCALCACCOUNT_LOGIC,SAPPSET,%APPSET%)
TASK(/CPMB/RUNCALCACCOUNT_LOGIC,SAPP,%APP%)
TASK(/CPMB/RUNCALCACCOUNT_LOGIC,SELECTION,%SELECTION%)
TASK(/CPMB/RUNCALCACCOUNT_LOGIC,LOGICFILENAME,CALCACCOUNT.LGF)
But anytime I run the package it fails giving me the message error: "Accounts are not available in the rule table".
I tried every possible change but nothing; if someone could help me somehow I'd be really grateful!!
Thanks
Filippo

Hi James,
Thanks for your quick response. There is no currency dimension in the application... I've tested with the correct businessrule as CALC value, but this didn't do the trick.
Any other suggestions?
Regards,
Vincent

Error: You are not a receiver of the work item in Leave Request Deletion

Hi All,
We are using customized leave request workflow which is the copy of standard leave request workflow.
All tasks are assigned as general tasks and assigned in SWFVISU.
But the employees are unable to delete the leave request with Sent status.
Scenario:
Employee applies leave.
Now when the employee tries to delete / cancel the leave request before approval (Status is SENT), the employee is getting the error
"You are not a receiver of the work item".
This issue is happening for only the leaves which are in "SENT" status and though the employee is able to delete the "REJECTED" leave requests. The employee is also able to change / modify the leave requests without an issue.
We are on EHP 7 with SP level 22 and running this on Portal 740.
I have gone through the threads related to this issue but did not get any success.
Please let me know if I am missing something that can resolve the issue .
Regards,
Anurag

Hi Sid,
As I mentioned above, we are on EHP 7 with SP 22 and hence the above note 1066288 does not apply in our case.
Moreover, we're using WDA based application and the above note seems to be the one for XSS based on WDJ.
Regards,
Anurag

When I try to launch terminal, i get an error "You are not authorized to run this applicationThe administrator has set your shell to an illegal value."

When I try to launch terminal, i get an error "You are not authorized to run this applicationThe administrator has set your shell to an illegal value."

If you'd asked a question in your original post it might have solicited more pertinent responses. As it is, you were stating a fact. No one knew whether you considered that fact a problem, or what you were hoping to gain by doing so.
The simple addition of 'can anyone help me fix this so I can run Terminal' would have counted for a lot.
As it is, your solution is likely to require the Terminal, so you're going to need to fix that one way or another. The simplest would be to create a new admin account (System Preferences -> Users & Groups) then log in using that account.
Then try and launch the terminal. If that works the problem is specific to your original account and can likely be fixed via some command-line tweaking. I'd start with:
dscl . read /Users/<username>
(where <username> is the short name of the account having a problem). This will show the records in the directory data for your account, one of which will be UserShell. Chances are that value is invalid, or missing, and can be corrected via:
sudo dscl . -change /Users/<username> UserShell <currentValue> /bin/bash
(where <currentValue) is the current setting for UserShell) which will change the user's shell to /bin/bash (the default).
Of course, you might already know this and already tried, but since you didn't say so in your original post it's worth checking.

Canon 7D Mark II error "Files are not recognized by the raw format support in Light (149)"?

Has anyone tried to load raw files from a Canon 7D Mark II I get an error "Files are not recognized by the raw format support in Light (149)"?

Based on previous experience, I expect the final versions of LR, ACR and DNGC to be released simultaneously. We have so far seen Release Candidates of ACR and DNGC but not LR.
Unless there needs to be a second ACR/DNGC Release Candidate which happens once every few years for special circumstances, which I don't see any of at the moment.

Error -annotations are not supported in -source 1.3

Hi friends, when I try to compile my src code using ANT ,
it gives me this error :
annotations are not supported in -source 1.3 -
use -source 5 or higher to enable annotations)
@Override
^
what is source 5...? If it is a jdk version than I am using jdk 1.6.X
Plz help

ANT is apparently compiling with the -source 1.3 option, meaning that the code must be compatible with java 1.3. Check the declaration of the javac ant task in your build file. It should have something like this:
<javac source="1.3" ../>remove that attribute.

BPM error: interface are not same

Similar Messages

Maybe you are looking for