BPM message collect problem

Hi,
I have a problem with collecting messages and sending them together. I'm trying to work out a simple correlation example. Its a File -> XI -> File scenario. I followed the blog
/people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm
to work this out. My BPM looks like
a block which contains an infinite loop with Receive and Container steps, an exception step and a deadline step with deadline 2 mins --> Transformation step --> Send step that sends out the bundled message.
My problem is, after the file is being picked up by XI, nothing happens, on MONI the Outbound status is stuck in "Message being sent" status forever. On the Process engine workflow the deadline step is executed, but it is not proceeding to the Transformation and send step.
I've read a lot of material on this forum, it seems simple but for some reason I'm not able to get this to work.
Could somebody please guide me on this?
Thanks
Karthik

Hi,
Check this <a href="http://help.sap.com/saphelp_nw04/helpdata/en/96/0a2441509fa831e10000000a1550b0/content.htm">Montioring the BPE</a> for debigging your BPM.
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/08/16163ff8519a06e10000000a114084/content.htm">Collecting and Bundling -- Single Interface</a>
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/0e/56373f7853494fe10000000a114084/content.htm">Collecting and Bundling -- Multiple Interface</a>.
Regards,
Bhavesh

Similar Messages

BPM :: Messages not processed at outbound side

Hi Experts,
We have 1000+ synchronous messages with BPM for only two days in July which havent processed fully. Now oncoming messages are getting processed fine, but the messages which were waiting for outbound processing from July are still waiting.
inbound side there is a success flag and outbound side it is showing a clock symbol(looks like scenario is collecting / waiting)... cant see any failed/waiting messages iin queues .. when I checked the workflow logs few are showing workflow manually edited and processed after exception.
The date messages were triggered are 10/Jun and seems one or more messages were edited on 17/jun later.
Now we would like to know which workflow thrown the exception and what they have done during manual operation.
And how to process the remaining holding messages.
Thanks in advance for you ideas and suggestions.

Hi,
As you pointed out in your post that
"inbound side there is a success flag and outbound side it is showing a clock symbol(looks like scenario is collecting / waiting)... "
Now you have not explained your scenario completely. Still from the problem statement I can say that The BPM is waiting for some messages. There are three possible scenarios where you can see the clock symbol.
You have the option of collecting multiple messages for an interface and bundling them into one message, for example, individual sales order items into one sales order. To do so, you need to define a receiver step within a loop. The loop can finish in a variety of ways.
Payload-Dependent => The loop finishes when the number of messages received matches the number specified in the payload of the messages.
Time-Dependent => The loop finishes at a specified point in time.
Message-Dependent => The loop finishes when a specific message is received.
Once all the messages have been received, a transformation step bundles the messages collected in the container element and from them creates a message in the container element .This message is then sent by a subsequent send step.
The processes use one of the abstract interfaces as an inbound interface, and the other as an outbound interface.
Your BPM cannot be time dependant, otherwise it would have completed processing by now.
Either your BPM is message dependant or payload dependant. You need to find this out.
Check out the correlation (if) used in BPM, and the condition in BPM which stops the message collection.
Plesae check SXMB_MONI and study the messages which have been succesfully processed by the BPM, so if your BPM is message dependant you have to find out what message it needs to stop collecting the message, this you can do by studying the successful message processed by the BPM. In this case your BPM will contain a FORK step. In one branch of FORK step there will be a receive step, this is the step where you can find the message required to complete waiting stage of the BPM.
Check if this message has arrived or not.
If your BPM is Payload dependant, find out whether number of messages received by the BPM matches the expected count or not. In this case the BPM must have a container operation to count the messages received. If the count is less than required value, the BPM will remain in waiting state.
regards
Anupam

Loading and with error message :COLLECTION in SOURCE SYSTEM ENDED

Hi,
Facing problem with master data object while loading and with error message :COLLECTION in SOURCE SYSTEM ENDED
This load is getting failed every day. It is a full load and records are getting transferered and added.
when we check in details tab in RSMO all data packets in processing is green but in extraction some of the data selection scheduled are in yellow.We are changing QM status to green as records are added.
Version i am using is BW 3.5
Please let me know what will be the problem???
Thanks,
Edited by: lokesh thonsyd on Feb 18, 2009 8:55 AM

First try to find out the reason for the load failure. Once you fix this, do a manual run of the infopackage and when successful you can continue with the rest of process chain.
Sometimes, it doesn't help to just set a request to green status in order to run the process chain from that step on to the end.
You need to set the failed request/step to green in the database as well as you need to raise the event that will force the process chain to run to the end from the next request/step on.
Therefore you need to open the messages of a failed step by right clicking on it and selecting 'display messages'.
In the opened popup click on the tab 'Chain'.
In a parallel session goto transaction se16 for table rspcprocesslog and display the entries with the following selections:
1. copy the variant from the popup to the variante of table rspcprocesslog
2. copy the instance from the popup to the instance of table rspcprocesslog
3. copy the start date from the popup to the batchdate of table rspcprocesslog
Press F8 to display the entries of table rspcprocesslog.
Now open another session and goto transaction se37. Enter RSPC_PROCESS_FINISH as the name of the function module and run the fm in test mode.
Now copy the entries of table rspcprocesslog to the input parameters of the function module like described as follows:
1. rspcprocesslog-log_id -> i_logid
2. rspcprocesslog-type -> i_type
3. rspcprocesslog-variante -> i_variant
4. rspcprocesslog-instance -> i_instance
5. enter 'G' for parameter i_state (sets the status to green).
Now press F8 to run the fm.
Now the actual process will be set to green and the following process in the chain will be started and the chain can run to the end.

11g Grid Control - Host Configuration Collection Problems

Hi Guys,
I just installed Oracle 11g Grid Control and it has been running for 2 weeks until I recently tried to walk through the parts of it.
My intention was to clear off all the error messages, critical warnings, alerts, and policy warnings.
When I arrived at the development summary box, on the home tab, I can see that there is 1 collection problem.
When I clicked it, I saw that apparently the problem is with the host where I installed the grid control.
Problem type: Warning during collection of Oracle Software
message: Unknown WLS Home Location or WLS Version in Middleware Home /u01/app/oracle/product/middleware
I tried clicking on the "Refresh Host" button, but it didn't solve the problem at all.
I have also tried to take a look at the targets.xml however it seems the configuration in there are already pointing to the correct path to the weblogic home.
Please let me know if anyone has a suggestion for this.
Searching from google doesn't really return anything closely matched to this.
Thanks,
Adhika

What is the intent/timeline for fixing this bug? On MOS, it appears to have a status of "Status 33 - Suspended, Req'd Info not Avail". We are encountering this bug also and I would glady provide information from our systems in order for the issue to be resolved.
Thanks.
PostScript: FWIW, Google yielded a blog referencing this error and Doc ID 1433113.1. I am unable to access that document (as was the blogger). Because of this, and another major caveat (our machines with this collection error do not have WLS installed on them), I'm thinking this probably needs to be an SR rather than a forum discussion.
Edited by: JeriF on Feb 4, 2013 12:00 PM

I just received this message: "*** Collection __NSArrayM: 0x610004449540 was mutated while being enumerated." and it won't allow me to open or place any documents FROM photoshop but.......

I just received this message: "*** Collection <__NSArrayM: 0x610004449540> was mutated while being enumerated." and it won't allow me to open or place any documents FROM photoshop but I can open files from finder into photoshop. HELP! I just recently got a new iMac and have faced this problem before, we thought it was a permissions error from where we rebooted the computer from. Because of this we just wiped the computer and recently re-installed everything. Now 2 days after re-installing all programs including photoshop I'm receiving these errors. Why is this happening and how can I fix it!?

ok, i've just run a specific test.
1 - Online, ensure that mail is sync'd
2 - Disable network connection, confirm that mail has moved to offline mode
3 - Delete 20 messages in a folder
4 - Conifm they have been deleted (whilst still offline)
5 - Re-enable network connection, leave machine alone for 5 minutes
6 - Confirm that messages haven't been deleted and are still in the folder untouched
7 - Whilst still online, try to delete one or more of the messages, they vanish for a moment, then re-appear
8 - ***
Can replicate this at will......surely this isn't just me?
Seems I'm back to Outlook again

The message "A problem has occurred trying to process your request. Please try again later. We apologise for any inconvenience this may have caused." is displyed when I try to log on to my internet banking. Please can you tell me why?

Since upgrading to the latest version of Firefox, I'm now getting the message "A problem has occurred trying to process your request. Please try again later. We apologise for any inconvenience this may have caused." when I try to log onto my internet banking site. This occurs after going thru the first two steps of the login process. I don't get this problem when I login to all my other bookmarked sites, or when I use Internet Explorer. I'm using Windows XP. Any suggestions? (Note: I've just reloaded version 6 of Firefox, but it's not made any difference.)

See here > http://support.apple.com/kb/HT1527
From Here > http://support.apple.com/kb/TS1368
More info here > http://www.apple.com/support/itunes/downloading/

Hi! I can't upgrade my iTunes 10.3.1.55 on my Windows XP 2002 SP3 to the latest version of iTunes. Got the message: "A problem has occured with the Windows Installer-package. A program needed for this installation could not be run." What to do?

Hi! I can't upgrade my iTunes 10.3.1.55 on my Windows XP 2002 SP3 to the latest version of iTunes. Got the message: "A problem has occured with the Windows Installer-package. A program needed for this installation could not be run." What to do?

Perhaps let's first try updating your Apple Software Update.
Launch Apple Software Update ("Start > All Programs > Apple Software Update"). Does it launch and offer you a newer version of Apple Software Update? If so, choose to install just that update to Apple Software Update. (Deselect any other software offered at the same time.)
If the ASU update goes through okay, try another iTunes install. Does it go through without the errors this time?

Problem with HP pavillion dv7 giving message (a problem with the internal fan enter = shutdown

HP Pavillion DV7 notebook PC
Windows 7 64
intel I5
6 gig memory
service pack 1
I am trying to identify a problem with my HP Pavillion dv7 laptop
Several months ago it started getting hot and showing messages about problems with the internal fan and battery. It would say enter = shutdown and shut off. I suspected a bad battery so I checked it without it just plugging it in with the power cable. It seemed to work better so I assumed that was the problem.
I ordered a new battery and it worked for a while. The problem came back and is getting worse. I can run it without the battery for a while but it gets got and shows the same message.
I read on here that flashing and updating the bios worked for some but the latest update gives me an error IHISI not support BIOS then Insyde flash not supported.
any help would be great this PC has a lot of info on it and I dont think it is a lost cause
thanks

Hi duddy, sorry to hear that you are having issues with your computer over heating. I have found a document that will assist you with Restoring the BIOS. http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c02693833&lc=en&product=5199538&tmp...
I have also found a document that will assist you with Troubleshooting and Overheating and Auto shutdown issue. http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c03904182&lc=en&product=5199538&tmp...
If you are still having issues, please let me know and I will be happy to offer more assistance..
Thank you.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Shortly after launching into itunes, it freezes and I get the following message: A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available. How do I resolve this issue?

Shortly after launching itunes, the program freezes and gives me the following message:A problem has caused the program to stop working correctly. Windows will close the program and notify you if a solution is available. The program then closes, even if I have not completed what I am doing. How do I resolve this problem?

That is what I thought. Cannot figure out how to turn it off, though.
However, when I talked to her over the phone, she is definitely using Firefox. I tried to access her Internet Explorer, but it has been deactivated, I believe by Firefox.
She primarily uses the Internet to communicate with her kids, grandkids, and great grandkids. Her e-mail account is with Yahoo Mail, and she uses Firefox to access it. Occasionally, she uses the web to look up information, and may have downloaded a virus.
Do you think there's something in Yahoo Mail that conflicts with Firefox? Is there some remnant of Internet Explorer that needs to be deactivated? Could she have a virus?
Any information would be gratefully appreciated. I live 7 hours away, and can only help her over the phone. I'm trying to develop a course of action that I can use with her. I know a little bit about Firefox, so need your expertise.

ITunes will not open, no message of problems

iTunes does not show up whenever I click on it, and no message of problems comes onto the screen. Absolutely nothing at all happens. Help?

See if QuickTime will open. iTunes uses QT codecs to play everything.
Sometimes QT will give an error message, where iTunes won't.
Also here is an article with lots more ideas to try:
http://docs.info.apple.com/article.html?artnum=93976

I rented a movie (dark shadows) but I can not see it, because a message appear "Problem loading...try again later". Is not a problem connection. I tried a lot of times to watch the movie and I didn't can.

I rented a movie (dark shadows) but I can not see it, because a message appear "Problem loading...try again later". Is not a problem connection. I tried a lot of times to watch the movie and I didn't can.
Thanks
Celeste

I rented a movie (The Hobbit)...but it stops loading.
The movie costs CHF 7.50.
A phone call to the support team costs CHF 46.-- !!!!!
What do you think I will do?
Pisella Verde

About BPM Message identification

please,tell me how to identify a BPM message in SXMB_MONI i.e., just by looking at the message we need to tell that

Hi,
go to transaction SXMB_MONI_BPE...all messages under that are BPM related..
More over u can see Integartion process name also..
Regards
BILL

RFC Message: Internal Problem, in REDWOOD CPS.

We have Redwood CPS 7 connected up to SAP IS-U Supply.
We keep getting random RFC errors when executing a script.
Any Idea
ERROR LOG   *******************
ABAP_RUN: R/3 call BAPI_XBP_JOB_OPEN failed
RFC error: XM034
RFC Message: Internal problem (function BAPI_XBP_JOB_OPEN)
TCTRETURNS/        : deleted
/ERROR LOG   *******************

Hi,
if this is a random issue I assume that the authorizations of the CPS communication user are OK, otherwise please verify:
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/49/bb35b8623a489aa63abd9f5ebf2448/frameset.htm
If this random issue happens only if you execute your custom script, I would assume that the script wants to create a job with invalid data. For example: some data is missing or wrong like start date/time, job class, job user, job name.
Let's analyze what you have posted here:
RFC error: XM034
RFC Message: Internal problem (function BAPI_XBP_JOB_OPEN)
-> XM034 point to the XMI log
-> use transcation RZ15 to analyze the XMI log
-> XM034 means "problem detected" (see appendix 8 of document ftp://ftp.sap.com/pub/icc/bc-xbp/BCXBPDOC70V3.pdf)
I locked into the code and indeed it seems that function BAPI_XBP_JOB_OPEN returns this message if the job cannot be created.
So if Sys- and XMI-Log cannot help you in solving this issue, I would create a message for dev. support.
Cheers,
Martin
http://service.sap.com/jsm

I have changed my PC, deactivated Adobe Acrobat and tried to load on new PC. Got to registration and get the message " A problem was encountered while trying to send information over internet" this is 8 standard

I have changed my PC, deactivated Adobe Acrobat and tried to load on new PC. Got to registration and get the message " A problem was encountered while trying to send information over internet" this is 8 standard
When I try to use it to make pdf files I get the message "Missing PDFMaker files
It is a proper copy with serial numbers

Moving this discussion to the Acrobat Installation & Update Issues forum.

My dreamweaver cs5.5 on window 7started working stop showing message A problem caused programe to

my dreamweaver cs5.5 on window 7started working stop showing message A problem caused programe to stop work correctly

What's the error message you received?
What do your logs tell you?
What were you doing just before you got the error message?
Nancy O.

BPM message collect problem

Similar Messages

Maybe you are looking for