BPM Process stop to work

when i start a bpm process during the runtime the process stop to work and in the default trace i found this error:
2011 09 26 15:24:11:785--+0200--Error--com.sap.glx.core.kernel.mmtx.PrimaryTransaction--
com.sap.BPM.core_svc.000064--BC-BMT-BPM-SRV--com.sap.glx.core.svc--F65520AD5DBD13F60000000000004958--29830050000000004----com.sap.glx.core.kernel.mmtx.PrimaryTransaction--SAP_BPM_Service--0----217287D5E83F11E0AF57000001C72BA2--217287d5e83f11e0af57000001c72ba2--217287d5e83f11e0af57000001c72ba2--0--Galaxy 2079 / Follower Worker--Plain----
afterCompletion(int):Unexpected error during deferred transaction commit: java.lang.IllegalMonitorStateException: Attempted to release a write lock, but the ticket-local lock count is zero (danger, inconsistency detected!)
     at com.sap.glx.core.dock.impl.GalaxyCowLock$LockImpl$WriteLockImpl.unlock(GalaxyCowLock.java:378)
     at com.sap.glx.core.kernel.mmtx.AbstractTransactionBase.localImageRelease(AbstractTransactionBase.java:798)
     at com.sap.glx.core.kernel.mmtx.AbstractTransactionBase.clean(AbstractTransactionBase.java:240)
     at com.sap.glx.core.kernel.mmtx.PrimaryTransaction.clean(PrimaryTransaction.java:86)
     at com.sap.glx.core.kernel.mmtx.AbstractTransaction.internalComplete(AbstractTransaction.java:392)
     at com.sap.glx.core.kernel.mmtx.AbstractTransaction.complete(AbstractTransaction.java:345)
     at com.sap.glx.core.kernel.mmtx.AbstractTransaction.rollback(AbstractTransaction.java:305)
     at com.sap.glx.core.kernel.mmtx.PrimaryTransaction$PersistentCommit.afterCompletion(PrimaryTransaction.java:401)
     at com.sap.engine.services.ts.jta.impl.SynchronizationWrapper.afterCompletion(SynchronizationWrapper.java:48)
     at com.sap.engine.services.ts.jta.impl2.TXR_TransactionImpl.rollback_internal(TXR_TransactionImpl.java:1286)
     at com.sap.engine.services.ts.jta.impl2.TXR_TransactionImpl.rollback(TXR_TransactionImpl.java:1048)
     at com.sap.engine.services.ts.jta.impl2.TXR_TransactionManagerImpl.rollback(TXR_TransactionManagerImpl.java:509)
     at com.sap.engine.services.ts.jta.impl2.TXR_UserTransaction.rollback(TXR_UserTransaction.java:170)
     at com.sap.glx.core.resource.impl.j2ee.J2EETransactionManagerFactory$JTATransactionManagerImpl.rollback(J2EETransactionManagerFactory.java:158)
     at com.sap.glx.core.kernel.mmtx.PrimaryTransaction.inRollback(PrimaryTransaction.java:274)
     at com.sap.glx.core.kernel.mmtx.AbstractTransaction.rollback(AbstractTransaction.java:279)
     at com.sap.glx.core.kernel.mmtx.AbstractTransactionBase.rollback(AbstractTransactionBase.java:778)
     at com.sap.glx.core.kernel.mmtx.AbstractTransaction.do_prepare(AbstractTransaction.java:202)
     at com.sap.glx.core.kernel.mmtx.AbstractTransaction.commit(AbstractTransaction.java:81)
     at com.sap.glx.core.kernel.execution.LeaderWorkerPool$Follower.run(LeaderWorkerPool.java:129)
     at com.sap.glx.core.resource.impl.common.WorkWrapper.run(WorkWrapper.java:58)
     at com.sap.glx.core.resource.impl.j2ee.J2EEResourceImpl$Sessionizer.run(J2EEResourceImpl.java:231)
     at com.sap.glx.core.resource.impl.j2ee.ServiceUserManager$ServiceUserImpersonator$1.run(ServiceUserManager.java:150)
     at java.security.AccessController.doPrivileged(Native Method)
     at javax.security.auth.Subject.doAs(Subject.java:337)
     at com.sap.glx.core.resource.impl.j2ee.ServiceUserManager$ServiceUserImpersonator.run(ServiceUserManager.java:147)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:182)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:299
(in other post i insert the rest of the default trace)
anyone know how can i resolve it?

011 09 26 15:34:27:382--+0200--Error--com.sap.glx.core.kernel.mmtx.AbstractTransactionBase--
com.sap.BPM.core_svc.000127--BC-BMT-BPM-SRV--com.sap.glx.core.svc--F65520AD5DBD14090000000000004958--29830050000000004----com.sap.glx.core.kernel.mmtx.AbstractTransactionBase--SAP_BPM_Service--0----217287D5E83F11E0AF57000001C72BA2--217287d5e83f11e0af57000001c72ba2--217287d5e83f11e0af57000001c72ba2--0--Galaxy 4198 / Follower Worker / Script [ita18.ferrero.com/fce_ita18_bu_bp_etl_lib/ETL_DB_MappingParallel_Run_POOL/4a8be0fffb1191332ea3088e50c48cf2/BLACK_HOLE]--Plain----
getLocalImage0(DockObject, boolean, boolean, boolean, boolean, boolean, long):Someone attempted to stain an object, which has already been deleted (OID = 3d806fd7-e844-11e0-a45d-000001c72ba2, separation = 3e58308c-e83f-11e0-b267-000001c72ba2, class = com.sap.glx.adapter.BPMNAdapter:Instance_0_TaskRun_1ae30a59b281399e4cf102c2ac458587). Blame this code: java.lang.NullPointerException: Object has been terminated (OID = 3d806fd7-e844-11e0-a45d-000001c72ba2, separation = 3e58308c-e83f-11e0-b267-000001c72ba2, class = com.sap.glx.adapter.BPMNAdapter:Instance_0_TaskRun_1ae30a59b281399e4cf102c2ac458587)
     at com.sap.glx.core.kernel.mmtx.AbstractTransactionBase.getLocalImage0(AbstractTransactionBase.java:560)
     at com.sap.glx.core.kernel.mmtx.AbstractTransactionBase.getLocalImage(AbstractTransactionBase.java:499)
     at com.sap.glx.core.kernel.mmtx.AbstractTransactionBase.getWritableImage(AbstractTransactionBase.java:612)
     at com.sap.glx.core.dock.impl.DockObjectImpl.bind(DockObjectImpl.java:386)
     at com.sap.glx.core.dock.impl.DockObjectImpl.bindChecked(DockObjectImpl.java:402)
     at com.sap.glx.process.adapter.bpmn.impl.BPMNAdapter.deleteChildInstances(BPMNAdapter.java:2245)
     at com.sap.glx.process.adapter.bpmn.impl.BPMNInstanceHandler.onDestruction(BPMNInstanceHandler.java:157)
     at com.sap.glx.core.dock.impl.DockObjectImpl.deletion(DockObjectImpl.java:226)
     at com.sap.glx.core.dock.impl.DockObjectImpl.delete(DockObjectImpl.java:563)
     at com.sap.glx.process.adapter.bpmn.impl.BPMNAdapter.deleteFirstChildOfFrameIfInstanceOrTask(BPMNAdapter.java:2947)
     at com.sap.glx.process.adapter.bpmn.impl.BPMNFrameHandler.onDestruction(BPMNFrameHandler.java:69)
     at com.sap.glx.core.dock.impl.DockObjectImpl.deletion(DockObjectImpl.java:226)
     at com.sap.glx.core.dock.impl.DockObjectImpl.delete(DockObjectImpl.java:563)
     at com.sap.glx.core.kernel.trigger.config.Script$DeleteInstance.execute(Script.java:298)
     at com.sap.glx.core.kernel.trigger.config.Script.execute(Script.java:798)
     at com.sap.glx.core.kernel.execution.transition.ScriptTransition.execute(ScriptTransition.java:78)
     at com.sap.glx.core.kernel.execution.transition.Transition.commence(Transition.java:138)
     at com.sap.glx.core.kernel.execution.LeaderWorkerPool$Follower.run(LeaderWorkerPool.java:127)
     at com.sap.glx.core.resource.impl.common.WorkWrapper.run(WorkWrapper.java:58)
     at com.sap.glx.core.resource.impl.j2ee.J2EEResourceImpl$Sessionizer.run(J2EEResourceImpl.java:231)
     at com.sap.glx.core.resource.impl.j2ee.ServiceUserManager$ServiceUserImpersonator$1.run(ServiceUserManager.java:150)
     at java.security.AccessController.doPrivileged(Native Method)
     at javax.security.auth.Subject.doAs(Subject.java:337)
     at com.sap.glx.core.resource.impl.j2ee.ServiceUserManager$ServiceUserImpersonator.run(ServiceUserManager.java:147)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:182)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:299)

Similar Messages

Unable to call BPM process webserivce from Proxy in oracle Service bus

I created business service in oracle service bus through BPM process WSDL. later Created proxy out of business service. In proxy service MessageFlow I created a route node with service as my BPM process business service. When i invoke proxy I am always getting the following error.
Request :
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:proc="http://bea.com/albpm/Sapme_test_1/Process">
<soapenv:Header/>
<soapenv:Body>
<proc:startSession>
<password>Participant</password>
<user>Participant</user>
</proc:startSession>
</soapenv:Body>
</soapenv:Envelope>
Response :
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
<soapenv:Body>
<soapenv:Fault>
<faultcode>soapenv:Server</faultcode>
<faultstring>BEA-380000: General runtime error: socket write error: Connection aborted by peer</faultstring>
<detail>
<con:fault xmlns:con="http://www.bea.com/wli/sb/context">
<con:errorCode>BEA-380000</con:errorCode>
<con:reason>General runtime error: socket write error: Connection aborted by peer</con:reason>
<con:location>
<con:node>RouteNode1</con:node>
<con:path>request-pipeline</con:path>
</con:location>
</con:fault>
</detail>
</soapenv:Fault>
</soapenv:Body>
</soapenv:Envelope>
I tried the same example with general webservice instead of BPM Process it is working fine.
regards,
pv

Even Some times I am getting the following error
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
<soapenv:Body>
<soapenv:Fault>
<faultcode>soapenv:Server</faultcode>
<faultstring>BEA-380000: BAD REQUEST</faultstring>
<detail>
<con:fault xmlns:con="http://www.bea.com/wli/sb/context">
<con:errorCode>BEA-380000</con:errorCode>
<con:reason>BAD REQUEST</con:reason>
<con:location>
<con:node>RouteNode1</con:node>
<con:path>response-pipeline</con:path>
</con:location>
</con:fault>
</detail>
</soapenv:Fault>
</soapenv:Body>
</soapenv:Envelope>
regards,
pv

Bath process stopped working after upgrading from Acrobat Pro 7.1 to 8.1.3

I have a batch process that was working in Acrobat 7.1 Professional on that no longer works when using Acrobat 8.1.3. It essentially takes a PDF sizes it down, puts a stationary behind it, watermarks it with the month and moves on to the next file. My javascript skills are not as good as I wish and I can't figure out what has changed between versions to stop it from working. The java console gives a message saying "redeclaration of the const ConvertToPA." It seems like something in the syntax has changed. Does anyone know what's changed to stop it from working? I posted the code below. Many Thanks.
Note: Trusted functions and paths have been changed.
if (typeof global.user_response == "undefined")
{var cResponse = app.response({ cQuestion: "Enter the Month & Year of Published Ad (i.e. August 2008)", cTitle: "Published Ad"});
if (cResponse == null) {app.alert("Process Cancelled"); }
else {global.user_response = cResponse;} }
if (global.user_response) ConvertToPA();
function ConvertToPA() {
var size = this.getPageBox("Media"); if ((size[0] == 0) & (size[1] == 612) & (size[2] == 792) & (size[3] == 0))
{ trustedWatermark1 (this, true, "/Macintosh HD/Path/to/stationary/stationary1.pdf", app.constants.align.left , app.constants.align.bottom , 184, 12);
this.addWatermarkFromText ({cText: global.user_response + " Published Ad", cFont: "ArialNarrow,Bold", nFontSize: 14, aColor: [ "G", 0.5 ], bOnTop: true,
nHorizAlign: app.constants.align.center, nHorizValue: -50.4, nVertAlign: app.constants.align.bottom, nVertValue: 20.16}); }; //
var size = this.getPageBox("Media"); if ((size[0] == 0) & (size[1] == 792) & (size[2] == 612) & (size[3] == 0))
{ trustedAddWatermarkFlyer (this, true, "/Macintosh HD/Path/to/stationary/stationary1.pdf", app.constants.align.left , app.constants.align.bottom , 184, 12);
this.addWatermarkFromText ({cText: global.user_response + " Published Ad", cFont: "ArialNarrow,Bold", nFontSize: 14, aColor: [ "G", 0.5 ], bOnTop: true,
nHorizAlign: app.constants.align.center, nHorizValue: 40, nVertAlign: app.constants.align.bottom, nVertValue: 20.16}); }; //
var size = this.getPageBox("Media"); if ((size[0] == 0) & (size[1] == 612) & (size[2] == 396) & (size[3] == 0))
{ this.setPageRotations({nRotate: 270}); this.setPageBoxes({cBox: "Media",rBox: [-90,-108,702,504]}); this.setPageBoxes({cBox: "Crop",rBox: [-90,-108,702,504]});
trustedAddWatermark (this, false, "/Macintosh HD/Path/to/stationary/stationary2.pdf");
this.addWatermarkFromText ({cText: global.user_response + " Published Ad", cFont: "Arial,Bold", nFontSize: 24, aColor: [ "G", 0.5 ], bOnTop: true,
nHorizAlign: app.constants.align.center, nHorizValue: 72, nVertAlign: app.constants.align.top, nVertValue: -42}); }; //
var size = this.getPageBox("Media"); if ((size[0] == 0) & (size[1] == 396) & (size[2] == 612) & (size[3] == 0))
{ this.setPageBoxes({cBox: "Media",rBox: [-90,-108,702,504]}); this.setPageBoxes({cBox: "Crop",rBox: [-90,-108,702,504]});
trustedAddWatermark (this, false, "/Macintosh HD/Path/to/stationary/stationary3.pdf");
this.addWatermarkFromText ({cText: global.user_response + " Published Ad", cFont: "Arial,Bold", nFontSize: 24, aColor: [ "G", 0.5 ], bOnTop: true,
nHorizAlign: app.constants.align.center, nHorizValue: 72, nVertAlign: app.constants.align.top, nVertValue: -42}); }; //
var size = this.getPageBox("Media"); if ((size[0] == 0) & (size[1] == 263.9519958496094) & (size[2] == 612) & (size[3] == 0))
{ this.setPageBoxes({cBox: "Media",rBox: [-90,-174.0024,702,437.9976]}); this.setPageBoxes({cBox: "Crop",rBox: [-90,-174.0024,702,437.9976]}); trustedAddWatermark (this, false,
"/Macintosh HD/Path/to/stationary/stationary4.pdf");
this.addWatermarkFromText ({cText: global.user_response + " Published Ad", cFont: "Arial,Bold", nFontSize: 24, aColor: [ "G", 0.5 ], bOnTop: true,
nHorizAlign: app.constants.align.center, nHorizValue: 72, nVertAlign: app.co

You were right. I renamed the javascript that did it individually and everything works great. Thank you so much. Is that a change then from 7 to 8 because I didn't have this issue in 7?

How to Stop a BPM Process

Hi,
I have a scenario in which the BPM process went thru an endless loop. There was a logical flaw but the point is that there was no way to kill this process which was running through BPM . We tried RWB, BPM Engine Mointoring but with no success.
In MONI all we see is a clock symbol next to PE icon.
It would be really helpful if someone can tell me how to kill a process running in BPM engine.
Both MONI and RWB tell me the message is Successful therefore cannot be stopped but internally the message is going through BPM workflow and never comes out.
Thanks
Ashish

Hi Ashish,
Logon to the ABAP stack of XI.
Execute the transaction "SWWL" to delete the workflow items.
Regards,
Sridhar

Disp+work process stop

hi all,
When my SAP MMC start . It start normally and turn GREEN and soon goes YELLOW. the disp+work process stopped at that time.
All servies are running.
-- Lee Green

DEV_W0
trc file: "dev_w0", trc level: 1, release: "46D"
ACTIVE TRACE LEVEL           1
ACTIVE TRACE COMPONENTS      all, M
B
B Fri Mar 16 21:19:56 2007
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\TEK\SYS\exe\run\dboraslib.dll' ...
B Library 'D:\usr\sap\TEK\SYS\exe\run\dboraslib.dll' loaded
B Version of library 'D:\usr\sap\TEK\SYS\exe\run\dboraslib.dll' is "46D.00", patchlevel (0.575)
B New connection 0 created
M relno      4640
M patchlevel 0
M patchno    748
M intno      0
M pid        1972
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 1972) [dpxxdisp.c   912]
I MtxInit: -2 0 0
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation std
M <ES> Memory Reset enabled
X ES initialized.
M ThSysUsrCheck: clear T0
M calling db_connect ...
B find_con found the following connection for reuse:
B 0: name = R/3, concnt= 000000 state = DISCONNECTED, perm = YES, reco = NO
C Got ORACLE_HOME=D:\oracle\ora81 from environment
C Got NLS_LANG=AMERICAN_AMERICA.WE8DEC from environment
C Logon as OPS$-user to get SAPR3's password
C Connecting as /@TEK on connection 0 ...
C
C Fri Mar 16 21:20:43 2007
C *** ERROR => OCI-call 'olog' failed: rc = 1033
[dboci.c      2423]
C *** ERROR => CONNECT failed with sql error '1033'
[dboci.c      6721]
C Try to connect with default password
C Connecting as SAPR3/<pwd>@TEK on connection 0 ...
C
C Fri Mar 16 21:20:44 2007
C *** ERROR => OCI-call 'olog' failed: rc = 1033
[dboci.c      2423]
C *** ERROR => CONNECT failed with sql error '1033'
[dboci.c      6721]
C Got NLS_LANG=AMERICAN_AMERICA.WE8DEC from environment
C Logon as OPS$-user to get SAPR3's password
C Connecting as /@TEK on connection 0 ...
C *** ERROR => OCI-call 'olog' failed: rc = 1033
[dboci.c      2423]
C *** ERROR => CONNECT failed with sql error '1033'
[dboci.c      6721]
C Try to connect with default password
C Connecting as SAPR3/<pwd>@TEK on connection 0 ...
C
C Fri Mar 16 21:20:45 2007
C *** ERROR => OCI-call 'olog' failed: rc = 1033
[dboci.c      2423]
C *** ERROR => CONNECT failed with sql error '1033'
[dboci.c      6721]
B ***LOG BY2=> sql error 1033   performing CON [dbsh    0695 ]
B ***LOG BY0=> [dbsh    0695 ]
B ***LOG BY2=> sql error 1033   performing CON [dblink 0627 ]
B ***LOG BY0=> [dblink 0627 ]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 000256) [thxxhead.c   1093]
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   7850]
M
M Info for wp 0
M
M    stat = 4
M    reqtype = 1
M    act_reqtype = -1
M    tid = -1
M    mode = 255
M    len = -1
M    rq_id = -1
M    rq_source = 255
M    last_tid = 0
M    last_mode = 0
M    rfc_req = 0
M    report = >                                        <
M    action = 0
M    tab_name = >                              <
M
M *****************************************************************************
M *
M * LOCATION    SAP-Server xyz_TEK_00 on host xyz (wp 0)
M * ERROR       tskh_init: db_connect
M *
M * TIME        Fri Mar 16 21:20:45 2007
M * RELEASE     46D
M * COMPONENT   Taskhandler
M * VERSION     1
M * RC          13
M * MODULE      thxxhead.c
M * LINE        7930
M * COUNTER     1
M *
M *****************************************************************************
M
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 1972) [dpnttool.c   300]

Hi, can iMovie give pronlems during the boot process from my iMac Mine. I have often after working with iMovie that i get during the boot Psi SDXH pause so the boot process stops

hi,
can iMovie give problems during the boot process from my iMac Mini?
I have often, after working with iMovie that i get during the boot Psi SDXH pause
so the boot process stops at this point
I have often reinstall OSX Mavericks
regards,
HenkfromWinterswijk
Netherlands

Hello Federico,
Your EliteBook is a Business model. Your issue would be best answered on the HP Enterprise Business Community Forum
Good luck!
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Fault message in BPM process

I have a bpm process with a sync send step. i have a default fault message strcuture and my sync interface ( a proxy) is using this as fault message format. In case of an fault in the proxy i get the fault message returned. In my bpm i have an exception handler installed for the exception. What i would like to do in my process is send the fault message to another step like a send step.
i m not looking to understand sync/async bridges or how to setup a bpm process. I am looking for help in how i can work with the fault message in my bpm process other then only let it trigger the exception routine

Hi Frank,
in the view of your BP an exception at proxy side is no reason to stop processing. The message will be put to your interface and it is your decision to put data into a container and to send it. For using a "global" container for every kind of message have a look to my weblog <a href="/people/udo.martens/blog/2006/04/28/bpm-container-for-any-message-type Container for any Message Type</a>. If your send step is not successful and you want to catch that: Define an exception branch for your block, where you send a senseful message to notice the error. You can refer in the original send step the exception, during runtime the process jumps into the exception branch and is doing that what you defined there.
Regards,
Udo

Sequential processing of messages with bpm process

hi,
i have a bpm process that i want to process my messages sequential. for this i initially have played around with crerating my own queue but that didn t work. then i mocved to use the collect pattern and then process the messages. this works only for around 150 messages and the others are staying stuck in the queue for the bpm process the queue is in status stop. if a drop in another file then the queue get cleared and the new messages are placed in it and it still stays in stop and i need to delete queu and start again. Is there a solutio for this that the queue will collect the messages and when the bpm proces is finished it will start again ?
i have tried to avoid using the collect pattern and worked with my bpm process to let it use a specific queue but that also didn t work. i can process 1 message and then the rest stays in the queue? any help would be welcome

Hey
is there any reason specific reason for using BPM?
you can use EOIO to transfer your files sequentially.
thanx
ahmad

Oracle BPM Process Data mart

I am required to create audit reports on BPM workflows.
I am new to thid & need some guidance on configuring BPM Process Data mart. What are the pre-requisites for configuring it & what are the steps to do it.
Also, need some inputs on BAM database. What is the frequency of data upload. Is it data update or insert in BAM.

Hi,
You might want to check out the Administration and Configuration Guides on http://download.oracle.com/docs/cd/E13154_01/bpm/docs65/index.html.
I suspect you might find the BAM and Data Mart portions of this documentation a bit terse, so I've added the steps below that provides more detail. I wrote this for ALBPM 6.0, but believe it will still work for Oracle BPM 10g. It was created from an earlier ALBPM 5.7 document Support wrote called "ALBPM 5_7 Configuring and Troubleshooting the BAM and DataMart Updater.pdf.
You can define how often you want the contents in both databases updated (actually inserted) and how long you want to persist the contents of the BAM database during the configuration.
Here's the contents of the document:
1. Introduction
The use of BAM (Business Activity Monitoring) and Data Mart (or Warehouse) information is becoming more and more widespread in today’s BPM project implementations for the obvious benefits they bring to the management and tuning of processes.
BAM is basically composed by a collection of measurements of current processes load and execution times. This gives us an idea of how the business is doing at this moment (in a pseudo real-time fashion).
Data Mart, on the other hand, is a historical view of the processes load and execution times. And this gives us an idea of how the business has developed since the moment the projects have been put in place.
In this document we are not going to describe exhaustively all configuration aspects of the BAM and Data Mart Updater, but rather we will quickly move from one configuration step to another paying more attention to subjects that have presented some difficulties in real-life projects.
2. Creating the Service Endpoints
The databases for BAM and for Data Mart first have to be defined in the External Resources section of the BPM Process Administrator.
In this following example the service endpoint ‘BAMJ2EEWL’ is being defined. This definition is going to be used later as BAM storage. At this point nothing is created.
Add an External Resource with the name ‘BAMJ2EEWL’ and, as we use Oracle, select the Oracle driver, then click <Next>:
On the following screen, specify:
·     the hostname – here I have used ‘localhost’ as I am just setting this up to work on my laptop
·     the port for the Oracle service
·     the SID – here I have use Oracle Express so the SID is ‘XE’
·     the new user to create / use in Oracle for this database – here I have specified ‘BPMBAM’. This user, and its database, will be created later
·     the password for the user
Scroll down to the bottom of the page and click <Save>.
In addition to a standard JDBC connection that is going to be used by the Updater Service, a remote JDBC configuration needs to be added as the Engine runs in a WebLogic J2EE container. This Data Source is needed to grant the Engine access over BAM tables thru the J2EE Connection Pool instead of thru a dedicated JDBC. The following is an example of how to set this up.
Add an External Resource with the name ‘BAMremote’ and select the Oracle driver, then click <Next>
On the following screen, specify:
·     the Lookup Name that will be used subsequently in WebLogic - here I have given it the name ‘XAbamDS’
Then click <Save>.
In the next example the definition ‘DWHJ2EEWL’ is created to be used later as Data Mart storage. If you are not going to use a Data Mart storage you can skip this step.
Add an External Resource with the name ‘DWHJ2EEWL’ and select the Oracle driver, then click <Next>:
On the following screen, specify:
·     the hostname – here I have used ‘localhost’ as I am just setting this up to work on my laptop
·     the port for the Oracle service
·     the SID – here I have use Oracle Express so the SID is ‘XE’
·     the new user to create / use in Oracle for this database – here I have specified ‘BPMDWH’. This user, and its database, will be created later
·     the password for the user
3. Configuring BAM Updater Service
Once the service endpoint has been created the next step is to enable the BAM update, select the service endpoint to be used as BAM storage and configure update frequency and others. Here the “Updater Database Configuration” is the standard JDBC we configured earlier and the “Runtime Database Configuration” is the Remote JDBC as we are using the J2EE Engine.
So, here’s the example of how to set up the BAM Updater service….
Go into ‘Process Monitoring’ and select the ‘BAM’ tab and enter the relevant information (using the names created earlier – use the drop down list to select):
Note that here, to allow me to quickly test BAM reporting, I have set the update frequency to 1 minute. This would not be the production setting.
Once the data is input, click <Save>.
We now have to create the schema and related tables. For this we will open the “Manage Database” page that has appeared at the bottom of the BAM screen (you may have to re-select that Tab) and select to create the database and the data structure. The user required to perform this operation is the DB system administrator:
Text showing the successful creation of the database and data structures should appear.
Once we are done with the schema creation, we can move to the Process Data Mart configuration screen to set up the Common Updater Service parameters. Notice that the service has not been started yet… We will get to that point later.
4. Configuring Process Data Mart Updater Service
In the case that Data Mart information is not going to be used, the “Enable Automatic Update” checkbox must be left off and the “Runtime Database Configuration” empty for this service. Additionally, the rest of this section can be skipped.
In the case it is going to be used, the detail level, snapshot time and the time of update should be configured; in addition to enabling the updater and choosing the storage configuration. An example is shown below:
Still in ‘Process Monitoring’, select the ‘Process Data Mart’ tab and enter the name created earlier (use the drop down list to select).
Also, un-tick the Generate O3 Cubes (see later notes):
Then click <Save>.
Once those properties have been configured the database and the data structure have to be created. This is performed at the “Manage Database” page for which the link has appeared at the bottom of the page (as with BAM). Even when this page is identical to the one shown above (for the BAM configuration) it has been opened from the link in the “Process Data Mart” page and this makes it different.
Text showing the successful creation of the database and data structures should appear.
5. Configuring Common Updater Service Parameters
In the “Process Data Mart” tab of the Process Monitoring section -along with the parameters that are specific to the Data Mart - we will find some parameters that are common to all services. These parameters are:
• Log directory: location of the log file
• Messages logged from Data Store Updater: severity level of the Updater logs
• Language
• Generate Performance Metrics: enables performance metrics generation
• Generate Workload Metrics: enables workload metrics generation
• Generate O3 Cubes: enables O3 Cubes generation
In this document we are not going to describe in detail each parameter. But we will mention a few caveats:
a. the Log directory must be specified in order for the logs to be generated
b. the Messages logged from Data Store Updater, which indicates the level
of the logs, should be DEBUG for troubleshooting and WARNING otherwise
c. Performance and Workload Metrics need to be on for the typical BAM usage and, even when either metric might not be used on the initial project releases, it is recommended to leave them on in case they turn out to be useful in the future
d. the Generation of O3 Cubes must be off if this service is not used, otherwise the Data Mart Updater service might not work properly .
The only changes required on this screen was to de-select the ‘Generate O3 Cubes’ as shown in the last section.
6. Set up the WebLogic configuration
We need to set up the JDBC data source specified above, so go to Services / JDBC / Data Sources.
Click on <Lock and Edit> and then <New> to add a New data source.
Specify:
·     the Name – use the name you set up in the Process Administrator
·     the JNDI Name – again use the name you set up in the Process Administrator
·     the Database Type – Oracle
·     use the default Oracle Database Driver
Then click <Next>
On the next screen, click <Next>
On the next screen specify:
·     the Database Name – this is the SID – for me that is XE
·     the Host Name – as I am running on my laptop, I’ve just specified ‘localhost’
·     the Database User Name and Password – this is the BAM database user specified in the Process Administrator
Then click <Next>
On the next screen, you can test the configuration to make sure you have got it right, then click <Next>
On the next screen, select your server as the target server and click <Finish>:
Finally, click <Activate Changes>.
7. The Last Step: Starting Up and Shutting Down the Updater Service
ALBPM distribution is different depending on the Operating System. In the case of the Updater Service:
-     For Unix like Operating Systems the service is started or stopped with the albpmwarehouse.sh shell script. The command in this case is going to look like this:
$ALBPM_HOME/bin$ ./albpmwarehouse.sh start
-     For Windows Operating Systems the service is installed or uninstalled as a Windows Service with the albpmwarehouse.bat batch file. The command will look like:
%ALBPM_HOME%\bin> albpmwarehouse.bat install
After installing the service, it has to be started|stopped from the Microsoft Management Console. Note also that Windows will start automatically the installed service when the computer starts. In either case the location of the script is ALBPM_HOME/bin Where ALBPM_HOME is the ALBPM installation directory. An example will be:
C:\bea\albpm6.0\j2eewl\bin\albpmwarehouse.bat
8. Finally: Running BAM dashboards to show it is Working
Now we have finally got the BAM service running, we can run dashboards from within Workspace and see the results:
9. General BAM and Data Mart Caveats
a. The basic difference between these two collections of measurements is that BAM keeps track of current processes load and execution times while Data Mart contains a historical view of those same measurements. This is why BAM information is collected frequently (every minute) and cleared out every several hours (or every day) and why Data Mart is updated infrequently (once a day) and grows indefinitely. Moreover, BAM measurements can be though of as a minute-by-minute sequence of Engine Events snapshots, while Data Mart measurements will be a daily sequence of Engine Events snapshots.
b. BAM and Data Mart table schemas are very similar but they are not the same. Thus, it is important not to use a schema created with the Manage Database for BAM as Data Mart storage or vice-versa. If these schemas are exchanged by mistake, the updater service will run anyway but no data will be added to the tables and there will be errors in the log indicating that the schema is incorrect or that some tables could not be found.
c. BAM and Data Mart Information and Services are independent from one another. Any of them can be configured and running without the other one. The information is extracted directly from the Engine Database (PPROCINSTEVENT table is the main source of info) for both of them.
d. So far there has not been a mention of engines, projects or processes in any of the BAM or Data Mart configurations. This is because the metrics of all projects published under the current Process Administrator (or, more precisely, FDI Directory) are going to be collected.
e. It is also important to note that only activities for which events are generated are going to be measured (and therefore, shown in the metrics). The project default is to generate events only for Interactive activities. This can be changed for any particular activity and for the whole process (where the activity setting, when specified, overrides the process setting). Unfortunately, there is no project setting for events generation so far; thus, remember to edit the level of event generation for every new process that is added to the project.
f. BAM and Data Mart metrics are usually enriched with Business Variables. These variables are a special type of External Variables. An External Variable is a process variable with the scope of an Instance and whose value is stored on a separate column in the Engine Instances table. This allows the creation of views and filters based on this variable. A Business Variable, then, shares all the properties of an External Variable plus the fact that its value is collected in all BAM and Data Mart measurements (in some cases the value is shown as it is for a particular instance and in others the value is aggregated).
The caveat here is that there is a maximum number of 256 Business Variables per FDI. Therefore, when publishing several projects into a single FDI directory it is recommendable to reuse business variables. This is achieved by mapping similar Business Variables of different projects with a unique real Variable (on the variable mapping performed at publish time).
g. Configuring the Updater Service Log
In section 5. Configuring Common Updater Service Parameters we have seen that there are two common Updater properties related to logging. These properties are “Log directory” and “Messages logged from Data Store Updater”, and they specify the location and level of these two files:
- dwupdater.log: which is the log for the Data Mart updater service
- bam-dwupdater.log: which is the log for the BAM updater service
In addition to these two properties, there is a configuration file called ‘WarehouseService.conf’ that allows us to modify these other properties:
- wrapper.console.loglevel: level for the updater service log
- wrapper.logfile.loglevel: level for the updater service log
- wrapper.java.additional.n: additional argument to the service JVM
- wrapper.logfile.maxsize: maximum size of the updater service log files
- wrapper.logfile.maxfiles: maximum number of updater service log files
- wrapper.logfile: updater service log file name (the default value is dwupdater-service.log)
9.1. Updater Service Log Configuration Caveats
a. The first three parameters listed above have to be modified when increasing the log level to DEBUG (since the default is WARNING). The loglevel parameters have to be set to DEBUG and a java.additional.n (where n is a consecutive integer to the already used ones) has to be set to –ea to enable asserts, since without this option no DEBUG message is going to be generated.
b. Of the other arguments, maxfiles might need to be increased to hold a few more days of data when the log level is set to DEBUG (with the default value up to two days are stored).
c. The updater service has to be stopped, uninstalled, installed and then started for any of these changes to take effect.
Hope this helps,
Dan

BPM Process chain takes long time to process

We have BI7, Netweaver 2004s on Oracle and SUN Solaris
There is a process chain (BPM) which pulls data from the CRM system into BW. The scheduled time to run this chain is 0034 hrs. This chain should ideally complete before / around 0830 Hrs. <b>Now the problem is that every alternate day this chain behaves normally and gets completed well before 0830 hrs but every alternate day this chain fails</b> there are almost 40 chains running daily. Some are event triggered (dependent with each other) or some run in parallel. In this, (BPM) process chain, usually there are 5 requests with 3 Delta and 2 full uploads (Master Data). The delta uploads finishes in 30 minutes without any issues with very few record transfers. The first full upload is from 0034 hrs to approximately 0130 hrs and the 2nd upload is from 0130 hrs to 0230 hrs. Now if the 1st upload gets delayed then the people who are initiating these chains, stop the 2nd full upload and continue it after all the process chains are completed. Now this entire BPM process chain sometimes takes 17 -18 hrs to complete!!!!!
No other loads in CRM or BW when these process chains are running
CRM has background jobs to push IDOCS to BW which run every 2 minutes which runs successfully
Yesterday this chain got completed successfully (well within stipulated time) with over 33,00,000 records transferred but sometimes it has failed to transfer even 12,00,000 records!!
Attaching a zip file, please refer the 21 to 26 Analysis screen shot.doc from the zip file
Within the zip file, attaching Normal timings of daily process chains.xls the name explains it.
Also within the zip file refer BPM Infoprovider and data source screen shot.doc please refer this file as the infopackage (page 2) which was used in the process chain is not displayed later on in page number 6 BUT CHAIN GOT SUCESSFULLY COMPLETED
We have analyzed:--
1)     The PSA data for BPM process chain for past few days
2)     The info providers for BPM process chain for past few days
3)     The ODS entries for BPM process chain for past few days
4)     The point of failure of BPM process chain for past few days
5)     The overall performance of all the process chains for past few days
6)     The number of requests in BW for this process chain
7)     The load on CRM system for past few days when this process chain ran on BW system
As per our analysis, there are couple of things which can be fixed in the BW system:--
1)     The partner agreement (transaction WE20) defined for the partner LS/BP3CLNT475 mentions both message types RSSEND and RSINFO: -- collect IDOCs and pack size = 1 Since the pack size = 1 will generate 1 TRFC call per IDOC, it should be changed to 10 so that less number of TRFCs will be generated thus less overhead for the BW server resulting in the increase in performance
2)     In the definition of destination for the concerned RFC in BW (SM59), the Technical Setting tab says the Load balancing option = No. We are planning to make it Yes
But we believe that though these changes will bring some increase in performance, this is not the root cause of the abnormal behavior of this chain as this chain runs successfully on every alternate day with approximately the same amount of load in it.
I was not able to attach the many screen shots or the info which I had gathered during my analysis. Please advice how do I attach these files
Best Regards,

Hi,
Normally index creation or deletion can take long time in case your database statistics are not updated properly, so can check stat after your data loading is completed and index generation is done, Do creation of database statistics.
Then try to recheck ...
Regards,
Satya

Scheduling a bpm process on particular date

Hi all,
I'm working on SOA suite 11.1.1.5 version.I want to scheduling a bpm process on 7th date of every month.Please give me a suggestion on this.
Thanks!

there are zillion of solutions, my favorite (I like primitive stuff, usually it works under all circumstances) is to use a cron job to run a WGET who triggers a HTTP enabled activator for the process.
Otherwise if you google for soa suite scheduler you will find endless discussions on this topic.... truth is that there is no simple solution AFAIK

Hello I have a problem with a Wifi Survey app, this app is from Access Agility, however this app was working fine, but without advise stop of working, I tried to open again, but app be close after few seconds.

Hello I have a problem with a Wifi Survey app, this app is from Access Agility, however this app was working fine, but without advise stop of working, I tried to open again, but app be close after few seconds. Every time that I tried to open it, in diagnostic and use create some files, in special one named LatestCrash-WifiSurvey.plist, this one generate an incident identifier E73B0164-CDFA-4E9E-839E-A0C021BD17A2, but this incident identifier change every time that I tried to open, the last incident identifier is: DE600EB3-AB57-4C33-8DE8-71F6788A7441.
After of it, I checked that the app had a new version available for downloading, I took a backup of my ipad and then upgrade this app, but is the same problem, all I want is to save the projects I had in this app, I´m afraid that if I delete this app and re-install it, probably I loss my projects.
Thanks for your help indicating how I can save my projects and see them for example in an iphone for assurance that data is not lost.
Something that called my attention is part of the log that shows a big CPU processing, but the strange thing is I killed all applications.
Incident Identifier: E73B0164-CDFA-4E9E-839E-A0C021BD17A2
CrashReporter Key:   ed0ca1405ce83d4f80cb3cce063d7248d7b76e91
Hardware Model:      iPad2,5
Process:         WifiSurvey [139]
Path:            /var/mobile/Applications/1BEEE35A-85FC-4BE4-B62A-39A930CB3CE2/WifiSurvey.app/Wi fiSurvey
Identifier:      WifiSurvey
Version:         ??? (???)
Code Type:       ARM (Native)
Parent Process: launchd [1]
Date/Time:       2013-08-08 19:01:13.476 -0500
OS Version:      iOS 6.1.3 (10B329)
Report Version: 104
Exception Type: 00000020
Exception Codes: 0x000000008badf00d
Highlighted Thread: 0
Application Specific Information:
com.accessagility.wifisurvey failed to launch in time
Elapsed total CPU time (seconds): 20.990 (user 20.990, system 0.000), 52% CPU
Elapsed application CPU time (seconds): 19.954, 50% CPU

See:
iOS: Troubleshooting applications purchased from the App Store
Contact the developer/go to their support site if only one app.
Restore from backup. See:
iOS: How to back up
Restore to factory settings/new iPod

How to carry out an action on a task in a bpm process from another adf app?

Hi everyone,
We have a simple BPM process with only one human task with two actions: approve and reject.
We want to know if it is possible to approve or reject this task from another adf application; I mean by clicking a button on a different page - not using the Actions menu in workspace, can I change the status of the task to approved or rejected and remove the task from the workspace of the assignee?

I think you can use ItemAdding event to update your fields. This works better for you instead of ItemAdded event.
Bala

Why can´t i have more than one initiator task on my bpm process

Hi All.
I am working with BPM 11g and would like to know:
Why can´t i have more than one initiator task on my bpm process
In this case, i will have two separeted process where each has its initiator task?
Regards,
Diovani

Hi Diovani
Two different processes can have different task initiators...task initiator means creation of a process instance which can happen only once

Calling Oracle BPM Process Web Service from Oracle Service Bus

Hi
I am using Oracle Service Bus 10gR3.
I have developed simple BPM process through Oracle BPM studio 10.3.1.0.I then followed steps below
1. Create a Process.
2. Expose the Process as a Web Service.
3. Run the project. This starts the Process Execution Engine.
4. Create an ALSB External Resource of type Management Host.
5. Create a second ALSB External Resource for registration.
6. Register the End Point
Until this point everything is fine. Then I created one project through Oracle Service Bus console. Under that created WSDL, Proxy Service and Business Service Folders. I am using the web service created through BPM studio as teh Business Service in SB . I then created one proxy service to route the request to the Business Service.
Finally when I try to test the Proxy Service by launching test console, I get the
<con:fault xmlns:con="http://www.bea.com/wli/sb/context">
<con:errorCode>BEA-380001</con:errorCode>
<con:reason>INTERNAL SERVER ERROR</con:reason>
<con:location>
<con:node>RouteNode1</con:node>
<con:path>response-pipeline</con:path>
</con:location>
</con:fault>
I also tried to debug through "Oracle Workshop for WebLogic Version 10.3 " . But I am not getting enough details as to why this is failing.
Please help me . Thanks In advance.
Thanks
Nilay
Edited by: user8950019 on Feb 1, 2010 4:11 AM

Hi,
When im calling wsdl created when BPM exposed as webservice in SOAP-ui, i first hit the startSession
Request is:-
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:exp="http://bea.com/albpm/ExpenseManagement/ExpenseReport">
<soapenv:Header/>
<soapenv:Body>
<exp:startSession>
<password>Employee</password>
<user>Employee</user>
</exp:startSession>
</soapenv:Body>
</soapenv:Envelope>
Response i Get is:-
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<soapenv:Body>
<ns1:startSessionResponse xmlns:ns1="http://bea.com/albpm/ExpenseManagement/ExpenseReport">
<return>3782hecq1s85h</return>
</ns1:startSessionResponse>
</soapenv:Body>
</soapenv:Envelope
but when i put this sessionId in main request:-
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:exp="http://bea.com/albpm/ExpenseManagement/ExpenseReport">
<soapenv:Header/>
<soapenv:Body>
<exp:expenseReport>
<sessionId>3782hecq1s85h</sessionId>
<reportArg>

<comments>yes</comments>

<costCenter>jaa</costCenter>

<description>aa</description>

<isApproved>y</isApproved>

<items>

<elements>

<amount>700</amount>

<date>?</date>

<description>?</description>

<receiptChecked>?</receiptChecked>
</elements>
</items>

<reviewedBy>?</reviewedBy>

<submitDate>?</submitDate>

<submittedBy>?</submittedBy>

<total>?</total>
</reportArg>
</exp:expenseReport>
</soapenv:Body>
</soapenv:Envelope>
Response coming is :-
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<soapenv:Body>
<soapenv:Fault>
<faultcode>soapenv:Server.userException</faultcode>
<faultstring>fuego.lang.ComponentExecutionException: The method 'expenseReport' from class 'xobject.ExpenseReportWebServiceImpl.ExpenseReportServiceInternalAlbpmListenerImpl' could not be successfully executed.</faultstring>
<detail>
<ns1:stackTrace xmlns:ns1="http://xml.apache.org/axis/">fuego.lang.ComponentExecutionException: The method 'expenseReport' from class 'xobject.ExpenseReportWebServiceImpl.ExpenseReportServiceInternalAlbpmListenerImpl' could not be successfully executed.
     at fuego.lang.Invokeable.invokeImpl(Invokeable.java:244)
     at fuego.lang.Invokeable.invokeDynamic(Invokeable.java:188)
     at fuego.lang.Invokeable.invoke(Invokeable.java:160)
     at fuego.soaptype.SoapListener.invokeDynamic(SoapListener.java:104)
     at fuego.lang.Invokeable.invoke(Invokeable.java:160)
     at fuego.fengine.FEngineWebServiceExecutor$2.execute(FEngineWebServiceExecutor.java:133)
     at fuego.server.execution.DefaultEngineExecution$AtomicExecutionTA.runTransaction(DefaultEngineExecution.java:304)
     at fuego.transaction.TransactionAction.startBaseTransaction(TransactionAction.java:470)
     at fuego.transaction.TransactionAction.startTransaction(TransactionAction.java:551)
     at fuego.transaction.TransactionAction.start(TransactionAction.java:212)
     at fuego.server.execution.DefaultEngineExecution.executeImmediate(DefaultEngineExecution.java:123)
     at fuego.server.execution.EngineExecution.executeImmediate(EngineExecution.java:66)
     at fuego.fengine.FEngineWebServiceExecutor$1.run(FEngineWebServiceExecutor.java:65)
     at fuego.component.Message.process(Message.java:576)
     at fuego.component.ExecutionThread.processMessage(ExecutionThread.java:780)
     at fuego.component.ExecutionThread.processBatch(ExecutionThread.java:755)
     at fuego.component.ExecutionThread.doProcessBatch(ExecutionThread.java:142)
     at fuego.component.ExecutionThread.doProcessBatch(ExecutionThread.java:134)
     at fuego.fengine.FEngineProcessBean.processBatch(FEngineProcessBean.java:244)
     at fuego.fengine.FEngineWebServiceExecutor$WebServiceExecutorPrincipal.processBatch(FEngineWebServiceExecutor.java:168)
     at fuego.component.ExecutionThread.work(ExecutionThread.java:839)
     at fuego.component.ExecutionThread.run(ExecutionThread.java:408)
Caused by: java.lang.RuntimeException: java.lang.NumberFormatException: For input string: "jaa"
     at xobject.ExpenseReportWebServiceImpl.ExpenseReportServiceInternalAlbpmListenerImpl.expenseReport(ExpenseReportServiceInternalAlbpmListenerImpl.xcdl:36)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at fuego.lang.JavaClass.invokeMethod(JavaClass.java:1410)
     at fuego.lang.JavaObject.invoke(JavaObject.java:227)
     at fuego.lang.Invokeable.invokeImpl(Invokeable.java:234)
     ... 21 more
Caused by: java.lang.NumberFormatException: For input string: "jaa"
     at java.lang.NumberFormatException.forInputString(Unknown Source)
     at java.lang.Integer.parseInt(Unknown Source)
     at java.lang.Integer.valueOf(Unknown Source)
     at fuego.util.Conversion.tojava_lang_Integer(Conversion.java:934)
     at fuego.xobject.runtime.ConversionUtilities.fromString(ConversionUtilities.java:56)
     at fuegoblock.xml.XmlElementDeserializer.deserializeElement(XmlElementDeserializer.java:175)
     at fuegoblock.xml.XmlElementDeserializer.deserialize(XmlElementDeserializer.java:81)
     at fuegoblock.xml.DynamicXml.createObjectFrom(DynamicXml.java:160)
     at fuegoblock.xml.DynamicXml.createObjectFrom(DynamicXml.java:119)
     at xobject.ExpenseReportWebServiceImpl.ExpenseReportServiceInternalAlbpmListenerImpl.expenseReport(ExpenseReportServiceInternalAlbpmListenerImpl.xcdl:17)
     ... 28 more</ns1:stackTrace>
<ns2:hostname xmlns:ns2="http://xml.apache.org/axis/">D-113014550</ns2:hostname>
</detail>
</soapenv:Fault>
</soapenv:Body>
</soapenv:Envelope>
can anyone explain why this error is coming.?
Edited by: user8937128 on May 19, 2010 6:58 AM

BPM Process stop to work

Similar Messages

Maybe you are looking for