BPM steps for Mapping faliure :like if else

Hi
I had a requirment in XI for...
File --> XI --> Abap Proxy.
Condition : XI has to do some field validation in Mapping and post the data to abap proxy. and if validation in mapping failed
(Mapping failed), XI has to write the data in some database table.
Note :
Validation : Char,integer or length check.
what i am trying is that..
Send Step -> Transformation(it failed ,exception should called another interface) --> Abap proxy
i.e database table
M i going with correct flow..
Regards,
Ajay P

Hi
i created the BPM as per the answers...and activated
http://img390.imageshack.us/img390/9182/bpmshotsdd5.jpg
but when i am testing it..
1.Case :
mapping do'nt fail
in Sxmb_moni
first message is sucessfull but second message fail with error
of " NO RECEIVER DETERMINATION "
id ID i have created 3 receiver determinations 3 inteface determination..
MY ID part is quite similar to
ID of scenario of File to RFC with BPM.
Regards
AjayP

Similar Messages

BPM Steps for RFC to RFC..

hi..
im configuring an R3 as sender and R3 is the receiver for the same..
need to do this thru' BPM..
can i have the steps in bpm mentioned for the same..
say sumthing like...
receive -> send sync and so on..
regards,
vishal

Hi
Try with this
Reciver step which will listen req from RFC(Sync)
Sender step which will push the request to another RFC
Thanks

Problems with Initial steps for Mapping with Java in XI 3.0

Hi,
I am having problems with a simple java mapping in XI 3.0. I have created another test class in my PC to test it ,and it works.
But when I use it in a example mapping it does not work.
I think the reason is because It cannot find the classes used in the XI server.
What do I have to do to make it work ?
Do I need to add / change / view something in the XI server?
Thanks a lot...
David

Down by java mapping

ECC6.0 upgrade and BW steps for mapping the new ECC6.0 source system

Hello gurus
We are upgrading from R3 4.6C to ECC6.0. We use BW 7.0 SP 18. We will create the new ECC6.0 source system in BW, replicate metadata and everything. The question is how do we copy or reassign the existing objects pointing to our current 4.6c dev system (transfer rules, transformations, infopackages, process chains) to point to the new ECC6.0 dev system ? As a note, we also need to keep the current 4.6c source system objects until go-live o ECC6.0.
What is the common practice in such a case ? I am sure we are not unique...
A prompt response would be appreciated.
Thank you all.

So the plan is to copy dev R3 and upgrade that - then Q r3 copied and upgrade that - then upgrade directly prod R3?
If so - then if it were me - I would firstly prove all this in a sandbox environment where BW dev points at an upgraded sandbox R3 ecc
ie same logical system
Then once that is proved I would organise downtime of BW development for a few months whilst the d-q-p ecc happens
Then when they copy dev r43 to ecc r3 i would then just point BW dev at the new ecc box and go from there (ie clear the deltas - change the logical system name to the new ecc box - replicate meta data - transtru all the datasources - run the process chains nothign to worry about)
However if you cant afford the down time - you may have to have an alternative transport route - ie copy dev BW to a another dev bw box and have an alternative path to production for issues
Then once everything is upgraded redo the changes through d-q-p to get the transports back in line (thats what we did)

Steps for Mapping OCI Catalog with R3 ISA (ERP E-Commerce)

Hi Gurus,
I just needed some help on how to go about integrating R3 ISA with OCI Catalog. Please provide reference to some relevant documentation if available.
Thanks.
Jai

Technically other than some [XCM settings and configuration|http://help.sap.com/saphelp_crm50/helpdata/en/2f/86653fac7ab21ae10000000a114084/content.htm] that define the external catalog URL, there isn't much needed to integrate a OCI compliant catalog - provided, you already have a OCI compliant catalog.
Start here on some technical information on OCI catalogs - [/people/masayuki.sekihara/blog/2007/12/07/oci-open-catalog-interface-setting-and-trouble-shooting|/people/masayuki.sekihara/blog/2007/12/07/oci-open-catalog-interface-setting-and-trouble-shooting]

Control step for exception in BPM

Hi
i am tring to learn exception in BPM.
i inserted this Send step (Synchronous) in exception branch in block. and then inserted control step in exception branch.
i created Errorsend as abbreviation on exception in block.
and assigned this to system error under exceptions in send step. and then defined on Exception handler,
and now i could not define anything on exception in control step for action as Throw Exception, i am not looking at Throw alert.
i made receiver jdbc error and also mapping error in intentionally. when i see sxmb_moni, i can see jdbc error as normal process like not using exception branch.
i would like to complete exception branch and control step for finishing touches.
thanks
venjamin

hi,
send step is for synch and jdbc,,,
abaproxy to jdbc (sync)
i made receiver jdbc error intentionaly. can i send back exception log to sender system program or send email to someone?
when have you been using this function in bpm? if i am not right way.
thanks
venjamin

Receiver Determination steps for BPM scenario

Hi Experts,
Scenario : SOAP -> Calling different webservices
1. SOAP Client Request
2. Call the Initial webserive to get the unique Id. No need to pass any request to call this webservice, but it will give the response.
3. Take the Initial websrevice's response as a request to second webservice
4. Pass the SOAP client request to Third webservice
BPM steps
1. Receive Step for SOAP Request
2. Send Step for the Initial webservice call.
3. Transformation step Initial webservice response to request change.
4. Send Step for Second webservice (Pass the the Transformation step's target interface as a request)
5. Send Step for Third webservice ( Pass SOAP client request)
I am done with the BPM flow. Could you please help to do the Receiver Determination steps.
Usually I follow the below steps.
1. Sender Service to BPM
2. BPM to other services. I have a doubt with the second step. I am not passing the SOAP client request to Initial webservice. So, please tell me how to proceed further for the BPM Receiver Determination steps..
Thanks & Regards
Sara

Hey,
First, what is th purpose of your SOAP client request.
Is it just to trigger the BPM.
Second on what basis are you fetching the unique Id from initial web service.
If it is a normal scenario then, the reciever determination will be like this.
Soap client-> BPM
BPM->initial webservice
BPM->second webservice
BPM->third webservice
but in this particular scenario i dont know which data is being used to fetch the unique Id.
regards,
Milan

Fonts for Interstate highways in Maps look like picture symbols.

Fonts for Interstate highways in Maps look like picture symbols.
Mavericks 10.9.4. Using FontAgentPro.
Is there a font that has to be activated? Or even a conflicting font that has to be deactivated like in Chrome?
Thanx.

Validate your fonts using Font Book.
How to use Font Book to validate fonts
1. Open Font Book in your Applications folder.
2. Select All Fonts.
3. Now click in the list of fonts and select all (Edit > Select All).
4. Under File in the Menu bar, select Validate Fonts.
5. Duplicate fonts will be marked with either the yellow badge or a black dot.
6. Select to remove or delete duplicates.*
7. Delete font caches (how to)
8. Restart your computer
* Step 6 – remove or delete duplicates is where the tricky part comes in. You can select to let Font Book disable or remove duplicates, but I’ve found that it removes the one you have not been using rather than selecting the best option. See Font Management in OS X, by Kurt Lang, for more info on fonts.
http://www.jklstudios.com/misc/osxfonts.html
See Kurt Lang's directions here to remove font caches
https://discussions.apple.com/message/26188553#26188553

Steps for creating UDF in Mapping

Can any one help me by giving steps that should be followed in creating UDF.the UDF should be used for mapping.

Rupesh,
Refer to url http://help.sap.com/saphelp_nw70/helpdata/en/22/e127f28b572243b4324879c6bf05a0/content.htm
Also here is some sample code for different scenarios
Example 1
This example copies the value of the Dynamic Configuration variable DCJMSCorrelationID into the message field CORRELID
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get
(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create
("http://sap.com/xi/XI/System/JMS","DCJMSCorreleationID");
String Corrid = conf.get(key);
return Corrid;
Example 2
This example prefills the input with zeros (if required)
NumberFormat f = new DecimalFormat("0000000000");
if(a.equals("") || a.equals(null))
return a;
else
return f.format(Integer.parseInt(a));
Example 3
This example checks and if the input string is null returns a message
if(a.equals("") || a.equals(null))
a = "No query data returned";
return a;
Regards,
Mike

Receiver Determination Step For Synchrnous Send in BPM

Hi,
How to use BPM Receiver Determination step for a synchronous send step?
My scenario is to send a request to multiple receivers synchronously and get the response.How can i achieve this using Receiver Determination step in BPM.
Regards
Divia

Hi Sreedivia,
As far as use of synchronous message is concern with receiver determination step, it wont allow you to use Abstract Synchronous message interface in it.
Even you cannot give multiple receivers without specifying any condition while creating Receiver determination in integration directory.
Regards,
Sami.

Phone going crazy like someone else has control of it... Any fix or updates for this?

My wifes LG G2 phone has been going crazy for quite some time now... Acts like some else has control of it. I've read in other forums that this is quite an issue with lots of other people and its a software issue but can't seem to find a fix for it. Any ideas?

You can do 1 of 3 things, or all. 1: use verizon's cloud to back up whats on the phone, like contacts, pictures and music etc...just know you only have 5GB of cloud space with VZW. 2: Use Google. Since you have a google OS and I'm sure her email is connected to the phone, all contacts will be backup up that way and you can use Google Drive since you have 15GB with Google to back up media and such. The app settings are set to Google backup already. 3: You can attach the phone to the computer and set to Media Sync/Device and back up everything media-wise to the PC. I suggest doing this method though: Use Verizon or Google to back up the contacts and the PC for media. Its just faster and easier PLUS...when you RESET do the following: Settings-- Backup and Restore--UNCHECK automatic restore. This will keep your saved app settings from reloading and might help with any problem app that was on the phone. After reboot you'll have a just-like out-of-the-box phone. It'll take time for verizon or google to sync up and you'll need to disable whatever apps you had disabled previously as well as reset-up your preferences, but its the easiest thing to do rather than wait til Mon-tues for a replacement. If this doesnt work, you'll definitely need to exchange. And, since VZW is going to require you to reset the phone anyway you'll be ahead of the game. IT IS POSSIBLE for you to call them on your phone and let them remotely diagnose your wife's phone, but I'm sure you'd need to reset before doing that out of privacy.

TS4268 I still have "Waiting for Activation" while trying to activate iMessage on the iphone, noting that it was working normally and stopped working suddenly, as well I had done all the mentioned steps.. what should I do else?

I still have "Waiting for Activation" while trying to activate iMessage on the iphone, noting that it was working normally and stopped working suddenly, as well I had done all the mentioned steps.. what should I do else?

Define "mentioned steps."
See this:
iOS: Troubleshooting FaceTime and iMessage activation

When I try to buy or update an app on my ipad, a window comes up asking me for a password using SOMEONE ELSE'S apple ID which prevents me from buying the app. How can I get my ipad toprompt for a password using my own apple ID, like it does w/ itunes

When I try to buy or update apps, myipad asks me for a password using SOMEONE ELSE'S apple ID, which prevents me from buying/updating apps. But when I am buying songs on itunes, the ipad asks me for my password using MY OWN apple ID and everything works fine. HOW DO I GET MY IPAD TO REQUEST MY PASSWORD USING MY OWN apple ID WHEN I AM BUYING OR UPDATING APPS?

The apps you are trying to update were purchased with (and therfore permanently linked to) someone elses Apple ID. If you do not know the password then you need to delete the app and redownload/purchase it with your Apple ID.

PO7.31 and BPM: Using Operation Mapping within BPM

Hello everyone!
I am facing an issue while trying the import/execute an Operation Mapping within a BPM. Have a PO 7.31SP07 installation (NWDS also on 7.31 SP07), and the process already have some working interface calls to PI, however still having issue while trying to execute the Operation Mapping:
1. After deploying the process, going to NWA -> SOA tab -> Application and Scenario Communication -> Application Communication -> select the process -> check the "localhost"/WS group for "Local System". The "Processing State" shows the error below:
Configuration for service group [localhost] failed. Error details:
[No endpoints found. Check if the service is configured and if its
endpoints are available in the . Service:
[{http://fusionconsultoria.com.br/sales_order_create}fusionconsultoria_salesord_om_SalesOrderSplit_ServicePortType]
Assigned Provider: [Local System]
Service Group: [localhost]
Service Group application: [fusionconsultoria/salesord]
Service Reference application: [fusionconsultoria/salesord]
2. During runtime, when trying to execute the OM automated step, on log viewer:
Error during SCA Processing
[EXCEPTION]
com.sap.engine.interfaces.sca.config.exception.ESBConfigurationException:
Could not process message for operation om_SalesOrderSplit_Service in
web service plugin module.
at com.sap.engine.services.sca.plugins.ws.WebServiceImplementationInstance.accept(WebServiceImplementationInstance.java:223)
at com.sap.engine.services.sca.das.SCADASImpl.invokeReference(SCADASImpl.java:314)
Caused by: com.sap.esi.esp.lib.mm.config.exceptions.ObjectNotExistsException:
Configuration not found for application:
fusionconsultoria/salesord,serviceRefId:{http://www.sap.com}salesord_fusionconsultoria~salesord~BPMcomponent_29768b4e-f59a-4ba3-a2ff-dee594b01ecf_WS.
Please check the configuration details from the NWA. You may have not
assigned the Service Group to a Provider System, or the generation of
the configuration has failed.
3. Carried out the steps from the referenced links below. They are quite similar to each other, however still facing the issue:
Reuse PI Operation Mapping as a service in SAP NetWeaver BPM
Using Operation Mappings (PI) in a BPM Process - Process Orchestration - SAP Library
Using NetWeaver PI’s Mapping in NetWeaver BPM
- Marked as "local provider" and WS;
4. Tried deleting, creating the automated step aswell reimporting the Operation Mapping.
5. Already reviewed the input/output mapping of the automated activity;
6. On ESR, the mapping works correctly.
7. Tried changing the outbound and inbound Service interfaces for the OM from stateless to stateless XI3.0, as well from synchronous to asynchronous.
At this moment I've completely ran out of ideas. Appreciate if anyone could give any insights, since I am running out of time with this project!
Thanks in advance to all and
Best regards,
Lucas Santos

Hi Lucus
I'm facing the same type of problem.
Why would re-creating the BPM fix this issue ?.    I fear I would spend all this effort for nothing.
What does your operation mapping wsdl:service > soap:address look like ?   What does your NWA BPM application Communication Configuration look like now - before you had that red light - like I have now.
The WSDL that is generated from the imported Operation Mapping : what end point is expected here. My wsdl:service > soap:address location has a port of 50500 - which does not even exist!. How can it work Does this get automatically deployed onto the Service Registry?.
I have built and deployed this but I get a run time error when it executes the operation mapping.   A technical error during invocation: Could not invoke service reference name.
I have seen in the deployed BPM's Application Configuration against the Consumed Service Groups an error against the associated service group
Configuration for service
group [SG_localhost] failed. Error details: [No endpoints found. Check if the service is configured and if its endpoints are available in the . Service
It almost seems that it wants me to publish the end point on the service registry - no idea how....but I none of the blogs and post indicate that I need to fiddle with this at all.
I have this question in SDN too if you care to take a look.

Please send detail steps for uploading legacy data

Hi friends,
please send detail steps for uploading legacy data
Thanking u in advance,
Diwa.

HI U CAN USE LSMW TO UPLOAD LEGACY DATA
LSMW is used for migrating data from a legacy system to SAP system, or from one SAP system to another.
Apart from standard batch/direct input and recordings, BAPI and IDocs are available as additional import methods for processing the legacy data.
The LSMW comprises the following main steps:
Read data (legacy data in spreadsheet tables and/or sequential files).
Convert data (from the source into the target format).
Import data (to the database used by the R/3 application.
But, before these steps, you need to perform following steps :
Define source structure : structure of data in the source file.
Define target structure : structure of SAP that receives data.
Field mapping: Mapping between the source and target structure with conversions, if any.
Specify file: location of the source file
Of all the methods used for data migration like BDC, LSMW , Call Transaction which one is used most of the time?
How is the decision made which method should be followed? What is the procedure followed for this analysis?
All the 3 methods are used to migrate data. Selection of these methods depends on the scenario, amount of data need to transfer. LSMW is a ready tool provided by SAP and you have to follow some 17 steps to migrate master data. While in BDCs Session method is the better choice because of some advantages over call transaction. But call transaction is also very useful to do immediate updation of small amout of data. (In call transaction developer has to handle errors).
SO Bottom line is make choice of these methods based of real time requirements.
These methods are chosen completely based on situation you are in. Direct input method is not available for all scenario, else, they are the simplest ones. In batch input method ,you need to do recording for the transaction concerned. Similarly, IDoc, and BAPI are there, and use of these need to be decided based on the requirement.
Try to go through the some material on these four methods, and implement them. You will then have a fair idea about when to use which.
LSMW Steps For Data Migration
How to develop a lsmw for data migration for va01 or xk01 transaction?
You can create lsmw for data migration as follows (using session method):
Example for xk01 (create vendor)
Initially there will be 20 steps but after processing 1 step it will reduced to 14 for session method.
1. TCode : LSMW.
2. Enter Project name, sub project name and object name.
    Execute.
3. Maintain object attributes.
    Execute
    select Batch Input recording
    goto->Recording overview
    create
    recording name.
    enter transaction code.
    start recording
    do recording as per ur choice.
    save + back.
    enter recording name in lsmw screen.
    save + back
Now there will be 14 steps.
2. MAINTAIN SOURCE STRUCTURES.
    Here you have to enter the name of internal table.
    display change
    create
    save + back
3. MAINTAIN SOURCE FIELDS.
    display change
    select structure
    source_fields->copy fields.
    a dialogue window will come .
    select -> from data file
    apply source fields
    enter No. of fields
    length of fields
    attach file
    save + back
4. MAINTAIN STRUCTURE RELATIONS
    display change
    save + back
5. MAINTAN FIELD MAPPING & CONVERSION RULE
    display change
    click on source field, select exact field from structue and enter
    repeat these steps for all fields.
    save+back
6. MAINTAIN FIXED VALUES, TRANSACTION, USER DEFINED
    execute
    save + back
7. SPECIFY FILES.
    display change
    click on legacy data
    attah flat file
    give description
    select tabulatore
    enter
    save + back
8. ASSIGN FILE
    execute
    display change
    save + back
9. IMPORT DATA.
    execute
    display change
    save + back
10. DISPLAY IMPORTED DATA
      enter ok, it willl show records only.
      back
11. CONVERT DATA
      execute
      display change
      save + back
12. DISPLAY CONVERTED DATA
      execute
      display change
      save + back
13. CREATE BATCH INPUT SESSION
      tick keep batch input folder
      F8
      back
14. RUN BATCH INPUT SESSION.
      sm35 will come
      Object name will be shown here
      select object & process

BPM steps for Mapping faliure :like if else

Similar Messages

Maybe you are looking for