BPM Steps for RFC to RFC..
hi..
im configuring an R3 as sender and R3 is the receiver for the same..
need to do this thru' BPM..
can i have the steps in bpm mentioned for the same..
say sumthing like...
receive -> send sync and so on..
regards,
vishal
Hi
Try with this
Reciver step which will listen req from RFC(Sync)
Sender step which will push the request to another RFC
Thanks
Similar Messages
-
BPM steps for Mapping faliure :like if else
Hi
I had a requirment in XI for...
File --> XI --> Abap Proxy.
Condition : XI has to do some field validation in Mapping and post the data to abap proxy. and if validation in mapping failed
(Mapping failed), XI has to write the data in some database table.
Note :
Validation : Char,integer or length check.
what i am trying is that..
Send Step -> Transformation(it failed ,exception should called another interface) --> Abap proxy
i.e database table
M i going with correct flow..
Regards,
Ajay PHi
i created the BPM as per the answers...and activated
http://img390.imageshack.us/img390/9182/bpmshotsdd5.jpg
but when i am testing it..
1.Case :
mapping do'nt fail
in Sxmb_moni
first message is sucessfull but second message fail with error
of " NO RECEIVER DETERMINATION "
id ID i have created 3 receiver determinations 3 inteface determination..
MY ID part is quite similar to
ID of scenario of File to RFC with BPM.
Regards
AjayP -
Question on BPM Transformation for File- RFC- File
Dear All,
I did the scenario from a blog ( http://www.sap-xi.com/sap-xi-scenario-file-rfc-bpm.html ) which is file->RFC->File with BPM. RFC call happening in BPM which is Sync and they are not using a transformation step anywhere in BPM. can you please explain me how mapping has been performed in BPM for this scenario.
BPM Design:
Start->Receive->Sync->Send->Stop
Thanks & Regards,
ManikandanSuprised to see this from you raja..
to better the performance of a BPM it is recommended to keep all the mappings in Interface Determination and not in BPM.....but in some cases it is required to have mappings within BPM.
they are not using a transformation step anywhere in BPM
Either mapping was not required or the same was included in Interface Determination.....it is not a compulsion to have a Transformation step.....i have not checked the blog but this should be the reason.
Edited by: abhishek salvi on Feb 21, 2011 6:42 PM -
Step by step cofig for jdbc-- xi-- rfc adapter.
hi,
all
can any one post any doc.. for the scenario
jdbc--> xi -->rfc
thanx
all sdn'sHi ! Dantuluri
U couldnt find the direct weblog
JDBC receiver
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30
JDBC sender
/people/yining.mao/blog/2006/09/13/tips-and-tutorial-for-sender-jdbc-adapter
IDoc sender
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
Refer the below links also for this scenario
/people/udo.martens/blog/2005/09/30/one-logical-system-name-for-serveral-bpm-acknowledgements
For any issues check this blog:
/people/michal.krawczyk2/blog/2006/10/11/xi-new-book-mastering-idoc-business-scenarios-with-sap-xi
also refer these .....
/people/michal.krawczyk2/blog/2005/09/16/xi-how-to-test-your-mapping-in-real-life-scenarios
/people/michal.krawczyk2/blog/2005/09/16/xi-how-to-test-your-mapping-in-real-life-scenarios
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
IDOc testing - /people/suraj.sr/blog/2005/12/29/generate-test-case-for-an-idoc-scenario
idoc settings /people/ravikumar.allampallam/blog/2005/02/23/configuration-steps-required-for-posting-idocsxi
idoc mapping - /people/james.guanzon/blog/2006/03/23/how-to-support-industry-standards-in-xi-part-ii-of-iii--mapping
Try this also .....
/people/laxman.molugu/blog/2006/08/13/integration-with-databases-made-easy-150-part-1
Re: Idoc triggering from a transaction
Message Mapping - JDBC to IDoc
Re: JDBC - System/Application Acknowledgement
/people/michal.krawczyk2/blog/2005/09/01/xi-idoc-adapter--edidc40--demystified
Process Integration (PI) & SOA Middleware
Pls reward if useful -
Hi All
I have created a bpm scenario with fork for the 2 incoming files, the 2 files is then transformed into 1 structure(This part works fine). Now I want to take the structure with both the files data in and transform it into a RFC to the BW system. Can anyone explain me the steps that I need to take. Do I need another receive step for the structure with both files data in or how do i go about doing this?
RegardsHi Stephan,
The transformation Step where you are collecting two files is the place where the two structure will combine and get transformed to RFC structure.
I think you are in impression that it would be difficult for you and you want to do it in this way :
Collect the two file and transform it into some combined structure then use another transformation step and use that combined structure as a source and RFC structure as a target and apply mapping.
Let me tell you one thing more the No. of transformation step in the BPM poor is the Performance.
So i would say you transform into the RFC structure in the already used transformation Step.
Dont go for another transformation Step.
Thanks
Sunil Singh -
hello all..
i knw the RFC calls being synchronous..
i knw i can call RFC to RFC without using BPM..
i was wondering, if i go in for an RFC to RFC call with uing BPM, does it makes sense?
the scenario i was working on, with two sync call, was goin into time out stage and surely performance was affected...
wot do u say on the mentioned scenario?
regards,
Vishalrahul,
i did try the same but ther seems to b error on the receive step...
i presume, it had to b receive (sync) and then the send async and then the receive async and the closing the send sync bridge...
correct me if im wrong..
or else if i take the request of sender rfc in an interface to make it to b async then use the receive step?
but in tht case my data itself was not passin... a dump on the report sayin,
"call to messaging system failed: com.sap.aii.af.ra.ms.api.DeliveryException"...
regards,
Vishal -
Step by step file to rfc with rfc code
hi
any body can u provide me file to rfc step by step method to practise
file->i am getting employee number from txt file.
RFC-> inserting into to one table
w/o BPM i need it is there anybody can provide me, i am searching it for almost 2 days. Please help meHi Mudit,
Could u please provide me simple step by step methods File to RFC scenarios url's or any materials.
Acutally i created this but i am not getting eny errors and results also. Please provide me.
what i have done is
from text file i am getting employee number and thru RFC i am just inserting that employee number into Ztab_RFc table. but if i run RFC in r/3 its getting inserted but thru XI RFC is not getting inserted what might be the exact problem, in msg_monitoring and sxmb_moni i am not getting errors. Please provide me solutions to cross check only i am just asking the step by step flow sir -
Multi mapping for Synchronous Interface (RFC)
Is it posssible to define synch multimapping (RFC)?
For exmaple my structure is
request
<items>
<item>
</item>
<item>
</item>
</items>
I want to invoke RFC for each <item> and to get response like
<responseitems>
<item>
</item>
<item>
</item>
</responseitems>
Do I need synch BPM or it is possible without?Hi,
u can do these buy settin the rfc to rfc to unbounded and map the items with the rfc so for every item u will get a rfc.
u can use <b>packaging</b> to perform the multimapping where u can avoid bpm.just create a external defnition for ur rfc and change the occurance of the rfc to 0..unbounded and use the external definition for mapping.
so for each <b>item tag a rfc will be generated</b>.
To get the response give ur inbound interface as synchronous.
regards
jithesh
Message was edited by: jithesh balakrishnan -
Rfc to rfc without bpm scenario
Hi,
I am trying to do RFC to RFC scenario without BPM.but in sender communication channel following error is coming.
Sender channel 'CC_RFC2RFC_SENDER' for party '', service 'BS_RFC2RFC11' (internal name 'RfcServer[CC_RFC2RFC_SENDER]')
Server data: {jco.server.gwhost=192.168.2.12, jco.server.progid=program_rfc2rf, jco.server.gwserv=sapgw00, jco.server.unicode=0}
Repository data: {jco.client.lang=en, jco.client.snc_mode=0, jco.client.client=000, jco.client.passwd=******, jco.webas.ignore_jdsr_error=1, jco.client.user=bcuser, jco.client.sysnr=00, jco.client.ashost=192.168.2.12}
Current pool size: 1, maximum pool size : 1
Can anyone please tell me the cause of this error.??
Thanks
RabiHi Priyanka,
I did as you had told but it is again showing same problem.
Will you please help me to resolve it?
Thanks
Rabi -
Graphical message mapping examples for JDBC and RFC lookup
hi, can any body provide me graphical message mapping examples for the "JDBC Lookup" function and "RFC Lookup" function?
I'm now studying the graphical message mapping and want to try those 2 functions. thank you.
I expect the examples to be simple enoung, not need to set up much.>
Madhu_1980 wrote:
> can u check this link:
>
> PI 7.0 & 7.1 Mapping - Blogs,Articles,Wiki,Code Samples and Videos Collections https://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=79955426
>
> it contains a link : SAP PI 7.1 Mapping Enhancements Series: Graphical Support for JDBC and RFC Lookups /people/jin.shin/blog/2008/02/15/sap-pi-71-mapping-enhancements-series-graphical-support-for-jdbc-and-rfc-lookups
May be I'm too foolish to follow those links, I got issues of each links.
What I really want is an example from step0
Swarup:
Refer the Lookup document - Easy Lookup in Process Integration 7.1
https://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/20befc9a-aa72-2b10-ae9b-b0988791d457
The first step is "Create an RFC Enabled Function Module for look up", but where can I create the function module? Should I use ESB, IB? or use transaction 'SE11' ?
Kulkarni:
Very good links for RFC lookup with 7.0/3.0
https://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/70d90a91-3cf4-2a10-d189-bfd37d9c3231&overridelayout=true
At page6 "PI Development/Configuration", it saies "You are on the design maintenance screen in the Integration Builder.Expand the subnodes for the software component version for which you want to import interfaces".
What is "design maintenance screen" ? My IB version is: Service Pack:08 Release:NW07_08_REL.
When I open IB, it display a screen titled with "Configuration: Intergation Builder", I did not find "software component version" node on the left tree.
Madhu_1980 :
it contains a link : SAP PI 7.1 Mapping Enhancements Series: Graphical Support for JDBC and RFC Lookups /people/jin.shin/blog/2008/02/15/sap-pi-71-mapping-enhancements-series-graphical-support-for-jdbc-and-rfc-lookups
The Prerequisites state:
The JDBC channel to be used for the lookup must be configured and activated in the Integration Directory.
The definition of the table used for the lookup must already be imported into the ES Repository as an external definition
But I don't know how to create a JDBC channel and define the table. -
Do we need to create message interfaces for idocs and rfcs thatare imported
do we need to create message interfaces for idocs and rfcs thatare imported
from sap server
in scenarios from sap system to file or vice versa
i knew that we need not create message types
do we also skip creating message interfaceshi,
you create an abstract message interface for IDOC only if you want to use
them in a BPM (integration process)
for more about IDOCs have a look at my book:
<a href="/people/michal.krawczyk2/blog/2006/10/11/xi-new-book-mastering-idoc-business-scenarios-with-sap-xi"><b>Mastering IDoc Business Scenarios with SAP XI</b></a>
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a> -
Hi,
Can any one give me the settings that are to be made under SLD.
i mean what needs to be done for technical system and for business systems ...steps to configure technical and business systems for both sender and receiver.
no links please
Points immediately rewarded.
ThanksHI,
You need to create Sender and Receiver Technical system as well as Business system
For Communication of RFC i.e. with R/3 you can use th Technical system and Business Systems. For SOAP ie.e web application you can go for Business Service also that to be created in Integration Directory.
In SLD,
1. Goto Technilca Landscape and Create new Technical system by giving all server connection detials
2. Then Create the Business Landscape
3. Assign the Product to Technical landscape so the Software components related to the Product will refer to the Technical and Business systems
Registering a new technical system in SLD - ABAP based
/people/michal.krawczyk2/blog/2005/03/10/registering-a-new-technical-system-in-sld--abap-based
Thanks
Swarup -
Logical systems for modeldata and RFC metadata
Hi All,
I want to know how I can display the my own created logical system names under the drop-down menu when i have to select the logical system names for modeldata and rfc metadata. I don't want to them to be written instead i want them to be one of the options in the drop down menu, as we have them in the FLIGHT_LIST_INIT example found in the sample applications and examples.
Thanks in advance
SrikantHi,
While creating SLD for your R/3 systems give the desired name of wht u want instead of logical name.
For configuring the same refer the link below :-
http://help.sap.com/saphelp_erp2004/helpdata/en/29/e0b75c2b7d40c5bfbda82e905b701c/frameset.htm
Regards,
guru -
Receiver Determination Step For Synchrnous Send in BPM
Hi,
How to use BPM Receiver Determination step for a synchronous send step?
My scenario is to send a request to multiple receivers synchronously and get the response.How can i achieve this using Receiver Determination step in BPM.
Regards
DiviaHi Sreedivia,
As far as use of synchronous message is concern with receiver determination step, it wont allow you to use Abstract Synchronous message interface in it.
Even you cannot give multiple receivers without specifying any condition while creating Receiver determination in integration directory.
Regards,
Sami. -
Control step for exception in BPM
Hi
i am tring to learn exception in BPM.
i inserted this Send step (Synchronous) in exception branch in block. and then inserted control step in exception branch.
i created Errorsend as abbreviation on exception in block.
and assigned this to system error under exceptions in send step. and then defined on Exception handler,
and now <b>i could not define anything</b> on exception in control step for action as Throw Exception, i am not looking at Throw alert.
i made receiver jdbc error and also mapping error in intentionally. when i see sxmb_moni, i can see jdbc error as normal process like not using exception branch.
i would like to complete exception branch and control step for finishing touches.
thanks
venjaminhi,
send step is for synch and jdbc,,,
abaproxy to jdbc (sync)
i made receiver jdbc error intentionaly. can i send back exception log to sender system program or send email to someone?
when have you been using this function in bpm? if i am not right way.
thanks
venjamin
Maybe you are looking for
-
ECC 6.0 Upgrade from R/3 4.7
Hi: we recently upgraded our sandbox from R/3 4.7x110 enterprise to ECC6.0, after the upgrade was completed we had to restore the system from backup tape. after restore license information was lost, so I loaded the saplicense from the command line, l
-
Acrobat X 600dpi b&w pdf Edit Object fails to load Photoshop
Hello: Adobe Acobat X correctly loads Photoshop when Edit Object | Edit Image is invoked on a color PDF. But it fails to make the transfer when the pdf is a black and white document image pdf (1 bit per color component). Instead, the error "Touchup
-
Scenario Execution in Sequence
Hi Guys i have two scenarios 1) JDBC1--> XI --> RFC1 2) JDBC1--> XI --> RFC2 RFC business logic of both uses both creating document based on Movement Type My concern is both RFC1 and RFC2 should not work in same time there should be some time gap for
-
MacoBook Pro connecting wirelessly via Personal Web Sharing from iMac G5
Subject line says it all... more specifically my problem is that some things seem "blocked" on the MBP when i'm connecting wirelessly via my iMac network, but then are 100% functional when I use other wireless networks. examples: • gmail via Mail.app
-
Hi ,i trying to restore my iphone 3g ,,i getting message 1015 !!! any help