BPM Studio

Accept help
I have a form with multiple fields " List of Value". Example: states, chiefs, positions and so on.
Initially I was calling a service component that calls a dbAdapter and load a list (states) and passes humantask, but now appeared several lists and can not abuse the service BPMN proccess.
How do I upload to all lists and are used in various humantasks? Call services for doing this is the best practice? Is there any way to load these lists within humantasks BPMN proccess without appearing in the component service?
Thank you in advance for help

Similar Messages

Problems to invoke a secure Web service from Oracle BPM Studio 10.3

Hi all
I'm trying to consume a web service through HTTPS protoloco Oracle BPM Studio v10.3, but I get the following error: sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target.
Some help!!
Thanks

Without going into any technical discussion about the code, my first question is what JDK version was used to create this which was imported into the form? Understand that Forms 10 runs on JDK 1.4.2, so if you used any newer JDK version, likely there will be problems.

Oracle BPM Studio with JDK 1.6

Hi,
regarding to the the release notes of the Oracle BPM 10.3.1 (http://download.oracle.com/docs/cd/E13154_01/bpm/docs65/relnotes/release_notes_OracleBPM10gR3.htm) the studio runs now with a JVM 1.6. But after I installed it seems to me that it is still 1.5 (if you look in Help/About Oracle BPM Studio/Configuration Details). Can I simply exchange the underlying JDK oder would there be any problems?
Kind regards
Matthias

you can.
See the changing your JVM section for Studio at the following pages for instructions on what to do http://download-llnw.oracle.com/docs/cd/E13154_01/bpm/docs65/installguide/index.html
Thanks,
Mike

Oracle BPM Studio 10g R3 cataloging Web Services strips special characters

Hi folks,
I have a Web Service that I'd like to invoke from an activity in my process.
When I catalog the WSDL, BPM Studio creates the associated External Resource just fine except for one small problem, namely all Simple Types that have 'special characters' in their enumerated String values are stripped clean.
Example 1:
ADSL1
ADSL2
ADSL2+
--> The plus is stripped from ADSL2+, causing BPM Studio to flag two problems caused by duplicate 'ADSL' values
Example 2:
adsl1#foo/123
--> Everything to the left of 123 is stripped leaving only '123' as a value
In fact in the BPM Studio's Editor, the only special character that is allowed is the underscore. Everything else e.g. \ # etc etc cannot be keyed in.
Has anyone come across this before? Thanks for reading :-)
cheers
jm

Authentication error using PAPI-WS for BPM Studio 10.3

I followed the steps laid out in the material from this thread using SOAP UI:
PAPI Web Service (PAPI-WS) Example for Oracle BPM Studio
It seems that BPM Studio does not recognize the default credentials user: "test" and password: "test"
I receive the following error when I try to make any call:
<S:Envelope xmlns:S="http://schemas.xmlsoap.org/soap/envelope/">
<S:Body>
<S:Fault xmlns:ns3="http://www.w3.org/2003/05/soap-envelope">
<faultcode>S:Client</faultcode>
<faultstring>Participant could not be authenticated. A wrong username or password might have been specified.</faultstring>
<detail>
<oens:OperationException xmlns:oens="http://bea.com/albpm/PapiWebService">
<exceptionName>fuego.papi.webservice.handlers.AuthenticationException</exceptionName>
<message>Participant could not be authenticated. A wrong username or password might have been specified.</message>
<technicalInfo>fuego.papi.webservice.handlers.AuthenticationException: Participant could not be authenticated. A wrong username or password might have been specified.
     at fuego.papi.webservice.handlers.AuthenticationHandler.processAuthentication(AuthenticationHandler.java:144)
     at fuego.papi.webservice.handlers.AuthenticationHandler.handleMessage(AuthenticationHandler.java:74)
     at fuego.papi.webservice.handlers.AuthenticationHandler.handleMessage(AuthenticationHandler.java:46)
     at com.sun.xml.ws.handler.HandlerProcessor.callHandleMessage(HandlerProcessor.java:292)
     at com.sun.xml.ws.handler.HandlerProcessor.callHandlersRequest(HandlerProcessor.java:135)
     at com.sun.xml.ws.handler.ServerSOAPHandlerTube.callHandlersOnRequest(ServerSOAPHandlerTube.java:133)
     at com.sun.xml.ws.handler.HandlerTube.processRequest(HandlerTube.java:116)
     at com.sun.xml.ws.api.pipe.Fiber.__doRun(Fiber.java:595)
     at com.sun.xml.ws.api.pipe.Fiber._doRun(Fiber.java:554)
     at com.sun.xml.ws.api.pipe.Fiber.doRun(Fiber.java:539)
     at com.sun.xml.ws.api.pipe.Fiber.runSync(Fiber.java:436)
     at com.sun.xml.ws.server.WSEndpointImpl$2.process(WSEndpointImpl.java:243)
     at com.sun.xml.ws.transport.http.HttpAdapter$HttpToolkit.handle(HttpAdapter.java:444)
     at com.sun.xml.ws.transport.http.HttpAdapter.handle(HttpAdapter.java:244)
     at com.sun.xml.ws.transport.http.servlet.ServletAdapter.handle(ServletAdapter.java:135)
     at com.sun.xml.ws.transport.http.servlet.WSServletDelegate.doGet(WSServletDelegate.java:129)
     at com.sun.xml.ws.transport.http.servlet.WSServletDelegate.doPost(WSServletDelegate.java:160)
     at com.sun.xml.ws.transport.http.servlet.WSServlet.doPost(WSServlet.java:75)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:709)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:243)
     at java.security.AccessController.doPrivileged(Native Method)
     at javax.security.auth.Subject.doAsPrivileged(Unknown Source)
     at org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:275)
     at org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:161)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:245)
     at org.apache.catalina.core.ApplicationFilterChain.access$000(ApplicationFilterChain.java:50)
     at org.apache.catalina.core.ApplicationFilterChain$1.run(ApplicationFilterChain.java:156)
     at java.security.AccessController.doPrivileged(Native Method)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:152)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:213)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:178)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:126)
     at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:105)
     at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:107)
     at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:148)
     at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:869)
     at org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:667)
     at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:527)
     at org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:80)
     at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:684)
     at java.lang.Thread.run(Unknown Source)
Caused by: fuego.papi.exception.AuthenticationException: Cannot authenticate participant 'test'.
     at fuego.papi.impl.ProcessServiceImpl.authenticatePassport(ProcessServiceImpl.java:297)
     at fuego.papi.webservice.pool.ProcessServiceSessionPoolManager.getSession(ProcessServiceSessionPoolManager.java:185)
     at fuego.papi.webservice.WebServiceManager.getProcessServiceSession(WebServiceManager.java:156)
     at fuego.papi.webservice.handlers.AuthenticationHandler.processAuthentication(AuthenticationHandler.java:141)
     ... 45 more
Caused by: fuego.directory.AuthenticationException: Login incorrect.
Detail:Verify that the information provided is correct.
If you cannot solve the problem, check with your administrator.
ID [default] PARTICIPANT [test] REASON [Login incorrect.
Detail:Verify that the information provided is correct.
If you cannot solve the problem, check with your administrator.
ID [Project:Test] PARTICIPANT [test] REASON [invalid username or password].
     at fuego.directory.AuthenticationException.wrap(AuthenticationException.java:104)
     at fuego.directory.project.engine.EmbeddedEngineAuthenticationAccessor.connect(EmbeddedEngineAuthenticationAccessor.java:69)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at fuego.directory.provider.DirectorySessionImpl$AccessorProxy.invoke(DirectorySessionImpl.java:756)
     at $Proxy12.connect(Unknown Source)
     at fuego.directory.provider.DirectorySessionImpl.connect(DirectorySessionImpl.java:250)
     at fuego.directory.provider.Factory.startSession(Factory.java:405)
     at fuego.directory.Directory.startSession(Directory.java:268)
     at fuego.papi.impl.ProcessServiceImpl.authenticatePassport(ProcessServiceImpl.java:287)
     ... 48 more
Caused by: fuego.directory.AuthenticationException: Login incorrect.
Detail:Verify that the information provided is correct.
If you cannot solve the problem, check with your administrator.
ID [Project:Test] PARTICIPANT [test] REASON [invalid username or password].
     at fuego.directory.project.engine.ProjectFullParticipantsAccessor.fetchHumanParticipant(ProjectFullParticipantsAccessor.java:82)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at fuego.directory.provider.DirectorySessionImpl$AccessorProxy.invoke(DirectorySessionImpl.java:756)
     at $Proxy15.fetchHumanParticipant(Unknown Source)
     at fuego.directory.project.engine.EmbeddedEngineAuthenticationAccessor.connect(EmbeddedEngineAuthenticationAccessor.java:66)
     ... 58 more</technicalInfo>
</oens:OperationException>
</detail>
</S:Fault>
</S:Body>
</S:Envelope>
Like I said above, it seems that BPM Studio does not recognize the default credentials user: "test" and password: "test"
Is there anyway to change these default credentials?
Thanks!
Edited by: user9001687 on Feb 10, 2010 2:14 PM
Edited by: user9001687 on Feb 10, 2010 2:16 PM

Thanks so much Dan. I changed as you mentioned and then added WSS-Username Token as while processing BPM process as web service I have used the same opetion. Still I am getting the same error for Authorization Failure.
SOAP Requests look like :
<soapenv:Envelope xmlns:pps="http://bea.com/albpm/ProLogisBPM/PPSFTProcess" xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
<soapenv:Header>
<wsse:Security soapenv:mustUnderstand="1" xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">
<wsse:UsernameToken wsu:Id="UsernameToken-2" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
<wsse:Username>Paul</wsse:Username>
<wsse:Password Type="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText">Paul</wsse:Password>
<wsse:Nonce EncodingType="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-soap-message-security-1.0#Base64Binary">AlmoI4QkO2hp9z10BQGA0A==</wsse:Nonce>
<wsu:Created>2010-03-17T15:48:04.843Z</wsu:Created>
</wsse:UsernameToken>
</wsse:Security>
</soapenv:Header>
<soapenv:Body>
Adter
<ns1:stackTrace xmlns:ns1="http://xml.apache.org/axis/">fuego.webservices.security.AuthorizationException: Authorization Failed.
     at fuego.soaptype.ProcessWebServiceAuthorization.authorize(ProcessWebServiceAuthorization.java:57)
     at fuego.soaptype.AxisSoapService$HttpBasicAuthentitcationHandler.invoke(AxisSoapService.java:888)
     at org.apache.axis.strategies.InvocationStrategy.visit(InvocationStrategy.java:32)
     at org.apache.axis.SimpleChain.doVisiting(SimpleChain.java:118)
     at org.apache.axis.SimpleChain.invoke(SimpleChain.java:83)
     at org.apache.axis.strategies.InvocationStrategy.visit(InvocationStrategy.java:32)
     at org.apache.axis.SimpleChain.doVisiting(SimpleChain.java:118)
     at org.apache.axis.SimpleChain.invoke(SimpleChain.java:83)
     at org.apache.axis.strategies.InvocationStrategy.visit(InvocationStrategy.java:32)
     at org.apache.axis.SimpleChain.doVisiting(SimpleChain.java:118)
     at org.apache.axis.SimpleChain.invoke(SimpleChain.java:83)
     at org.apache.axis.handlers.soap.SOAPService.invoke(SOAPService.java:453)
     at org.apache.axis.server.AxisServer.invoke(AxisServer.java:281)
     at fuego.soaptype.AxisSoapService.invoke(AxisSoapService.java:357)
     at fuego.soaptype.AxisSoapService.invoke(AxisSoapService.java:122)
     at fuego.webservices.HttpSoapListener.process(HttpSoapListener.java:206)
     at fuego.http.HttpExecution$1.run(HttpExecution.java:71)
     at fuego.component.Message.process(Message.java:576)
     at fuego.component.ExecutionThread.processMessage(ExecutionThread.java:780)
     at fuego.component.ExecutionThread.processBatch(ExecutionThread.java:755)
     at fuego.component.ExecutionThread.doProcessBatch(ExecutionThread.java:142)
     at fuego.component.ExecutionThread.doProcessBatch(ExecutionThread.java:134)
     at fuego.http.HttpExecution$HttpPrincipal.processBatch(HttpExecution.java:190)
     at fuego.component.ExecutionThread.work(ExecutionThread.java:839)
     at fuego.component.ExecutionThread.run(ExecutionThread.java:408)
Caused by: java.lang.IllegalArgumentException: user: null
     at fuego.components.WebServiceSessionManager.createSession(WebServiceSessionManager.java:88)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at fuego.lang.JavaClass.invokeMethod(JavaClass.java:1410)
     at fuego.lang.JavaObject.invoke(JavaObject.java:227)
     at fuego.lang.Invokeable.invokeImpl(Invokeable.java:234)
     at fuego.lang.Invokeable.invokeDynamic(Invokeable.java:188)
     at fuego.lang.Invokeable.invoke(Invokeable.java:160)
     at fuego.fengine.FEngineWebServiceExecutor$2.execute(FEngineWebServiceExecutor.java:133)
     at fuego.server.execution.DefaultEngineExecution$AtomicExecutionTA.runTransaction(DefaultEngineExecution.java:304)
     at fuego.transaction.TransactionAction.startBaseTransaction(TransactionAction.java:470)
     at fuego.transaction.TransactionAction.startTransaction(TransactionAction.java:551)
     at fuego.transaction.TransactionAction.start(TransactionAction.java:212)
     at fuego.server.execution.DefaultEngineExecution.executeImmediate(DefaultEngineExecution.java:123)
     at fuego.server.execution.EngineExecution.executeImmediate(EngineExecution.java:66)
     at fuego.fengine.FEngineWebServiceExecutor$1.run(FEngineWebServiceExecutor.java:65)
     at fuego.component.Message.process(Message.java:576)
     at fuego.component.ExecutionThread.processMessage(ExecutionThread.java:780)
     at fuego.component.ExecutionThread.processBatch(ExecutionThread.java:755)
     at fuego.component.ExecutionThread.doProcessBatch(ExecutionThread.java:142)
     at fuego.component.ExecutionThread.doProcessBatch(ExecutionThread.java:134)
     at fuego.fengine.FEngineProcessBean.processBatch(FEngineProcessBean.java:244)
     at fuego.fengine.FEngineWebServiceExecutor$WebServiceExecutorPrincipal.processBatch(FEngineWebServiceExecutor.java:168)
     ... 2 more
Caused by: fuego.directory.AuthenticationException: Login incorrect.
Detail:Verify that the information provided is correct.
If you cannot solve the problem, check with your administrator.
ID [default] PARTICIPANT [null] REASON [participant is empty].
     at fuego.directory.AuthenticationException.error(AuthenticationException.java:50)
     at fuego.directory.AuthenticationException.participantIdIsWrong(AuthenticationException.java:94)
     at fuego.components.WebServiceSessionManager$SessionImpl.<init>(WebServiceSessionManager.java:220)
     at fuego.components.WebServiceSessionManager.createSession(WebServiceSessionManager.java:79)
     ... 26 more</ns1:stackTrace>
Any help or guiding pointer would be deeply appreciated. TIA

How to trigger the start of activity in BPM Studio 10.3

Hi
I am new to BPM Studio 10.3.1.
I have configured two External Resources
1)J2EE Application Server: Giving details of the application server on which my JMS Queue resides
2)JMS Messaging Service: Giving details of the JMS Queue
I want to trigger the start of BPM process/ activity execution when a message arrives on the configured JMS Queue from an external system.
How will I be able to listen to that queue?
Similarly, I would also like to know the steps to post a message to JMS through the activity in BPM Studio.
Is there any document available that helps in configuring the External Resources other than the Studio Reference guide and User guide.
Can anyone please help on this?
Thanks

I don't know if this is exactly what you're after when you wan't to start an 'activity' with a JMS message,
If you're searching for a way to start the process, this might be your solution:
String procId = process.id;
*// Load the JMS Message in the argument holder*
m_begin.load(xmlText : message.textValue);
logMessage("JMS message retrieved from queue: \n" + message.textValue, severity : Severity.DEBUG);
*// Set the arguments which are sent with the new instance*
*Any[String] argsIn;*
argsIn["beginArg"] = m_begin;
*// Specify the process in which the new instance should be created*
ProcessInstance.create(processId : procId, arguments : argsIn, argumentsSetName : "BeginIn");
If you wan't to notify an instance which is in a Wait activity, you can use this:
*// Putting the message in the paramaters*
*Any[Any] params;*
logMessage("JMS message retrieved from queue: \n" + message.textValue, severity : Severity.DEBUG);
params["waitArg"] = m_wait;
*String instId = {instance ID};*
Notification.send(instanceId : instId, activityName : "WaitActivity", argumentSetName : "WaitIn", parameters : params);
-----

Adding Attachment in a single Instance BPM Studio 10.3.1

Hello,
I am using Oracle BPM Studio 10.3.1.0 and I am trying to create a process, where there will be an Interactive activity for a user role to upload a file (for example a .doc/docx or .pdf) and after the file is uploaded, another role will be able to download that file to their local filesystem (in the same instance).
I can't find a way to do this.
I have tried FileChooserDemo from this thread, How to Use FileChooser on for Client files however I can't find where or how to display the file to be downloaded, neither the file itself on the filesystem.
I am using BPM for the first time for a project I have been assigned, so if you can please reply with good instructions.
The Oracle BPM server and client are the same machine.
Any help will be very appreciated.
Elina

Hi Elina,
Just a couple things.
Be careful with the fileChooser. I think you saw an old post from Lilach (Re: Browse for file where it is discussed. The file you're choosing is from your server and not from your client. It might appear that it is working from your client machine now, but that's because you are testing using your own machine and that's perceived as the "server".
Sure you've considered this, but you might want to use the OOTB attachment feature for work item instances that comes with the Workspace.
Dan

BPM Studio 10.3 JDBC

Hi
I have java packet with code that connects to a Oracle database (jdbc connection)
which failes using BPM 10g studio.
Executing this as a java main program from prompt (using same libs and same jre as in STUDIO), works
Code looks like..
SolutionOfferManager solutionOfferManager = new SolutionOfferManager("CreatePackageInstance");
solutionOfferManager.loadPackageByPackageNameAndPricePlanName("Basic Package", "TBCB 365 Bas (P1) - 1 Anv. inkl.");
In Studio 10.3, failes (java.sql.SQLException: Try to set a parameter name that does not occur in SQL: in_soloffer_name. ???????????)
Code from BPM process is as simle as above and
looks like..
som = new SDE.Java.Apps.Usm.Blds.Som.SolutionOfferManager("CreatePackageInstance");
som.loadPackageByPackageNameAndPricePlanName("Basic Package", "TBCB 365 Bas (P1) - 1 Anv. inkl.");
All used jars are cataloged as far as i understand.....
Running same process in BPM enterprise (wls) works, i just dont understand where the differnce is
and why it failes running from BPM Studio..
Anyone how can help me understand..
/Gert

Solution procedure:
1. Create the wlfullclient.jar file in weblogic environment:
It is documented in: http://download.oracle.com/docs/cd/E12839_01/web.1111/e13717/jarbuilder.htm#BABCGHFH
2. Add the wlfullclient.jar file as external resource.
3. Create the Remote JDBC data source configuration

Error in jdevelper 11g when opening a project exported from bpm studio 10.3

Hello I hope someone can help me with this error, thanks in advance.
I installed soa suite 11G (including ps2) but when i open a project exported from bpm studio 10.3 i have the following error.
"An unexpected severe error has ocurred in jdeveloper"
Performing action JDeveloper Forum[ from oracle.ide.log.MessagePage ]
Performing action About[ from oracle.ide.log.MessagePage ]
Invoking command: [ from oracle.ide.log.MessagePage ]
Performing action Open...[ from oracle.ide.log.MessagePage ]
Performing action Open...[ from oracle.bpm.fusion.ui.editor.FusionEditor ]
Performing action Open...[ from oracle.ide.ceditor.CodeEditor ]
Performing action Close All[ from oracle.ide.ceditor.CodeEditor ]
Performing action Import...[ from oracle.ide.navigator.ApplicationNavigatorWindow ]
Jul 15, 2010 1:36:03 PM oracle.bpm.project.io.serializers.model.bpmn.BPMN20Loader load
SEVERE: unexpected element (uri:"http://www.wfmc.org/2004/XPDL2.0alpha", local:"Package"). Expected elements are <{http://xmlns.oracle.com/bpm/OracleExtensions}Annotations>,<{http://xmlns.oracle.com/bpm/OracleExtensions}AttributeExpression>,<{http://xmlns.oracle.com/bpm/OracleExtensions}BooleanFeature>,
......................... .... >
javax.xml.bind.UnmarshalException: unexpected element (uri:"http://www.wfmc.org/2004/XPDL2.0alpha", local:"Package"). Expected elements are <{http://xmlns.oracle.com/bpm/OracleExtensions}Annotations>,<{http://xmlns.oracle.com/bpm/OracleExtensions}AttributeExpression>,<{http://xmlns.oracle.com/bpm/OracleExtensions}BooleanFeature>,
<{http://www.omg.org/bpmn20}userTask>

Hi,
I have the same error. Please if you have the solution or any workaround, i 'll very appreciate if you post it here
Thanks in advance!

BPEL Process in BPM Studio

Hello,
First, are there any examples, tutorials, or documentation on how to create and run a BPEL process within BPM Studio (5.7) ?
I've gotten quite a ways by trial and error, but am having trouble running / testing out the process.
I've tried doing a Process->Generate Process Interface and Process->Run but nothing happens in BPM Studio when these are performed. What else do i need to do to test out my BPEL process with external webservice ?
Here's the steps i've taken so far.
1. Developed a simple external webservice with netbeans (JAX-WS).
2. Generated WSDL and XSD with wsgen executable.
3. Developed WSDL & XSD for BPEL Process request & reply.
4. Created a new project within BPM Studio.
5. Created a new module under "Catalog" for wsdl introspection.
6. Cataloged webservice component with local wsdl/xsd files.
7. Configured the Server configuration generated under the "External Resources" to point to the webservice host.
8. Configured the web service under "External Resources" to point to the webservice endpoint on the host (Server configuration)
9. Created a new BPEL Process.
10. Created new Instance variables for the process input and output as "component" type that point to the introspected request & response types.
11. Assigned the port type & method of the BPEL Receive to the introspected service defined in #3.
12. Assinged the input variable to the request variable created in #10.
13. Assigned port type & method & output variable to the BPEL reply.
14. Created a BPEL Invoke node between Request & Reply.
15. Assigned port type & method on the Invoke node to instrospected web service defined in #2.
16. Created instance variables for input & output of invoke node based on introspected request & reply
17. Assigned input & output.
Once all of this was complete, doing a Process->Check Design yeilded no errors or warnings.
Thanks for any help,
Chris

Hello,
First, are there any examples, tutorials, or documentation on how to create and run a BPEL process within BPM Studio (5.7) ?
I've gotten quite a ways by trial and error, but am having trouble running / testing out the process.
I've tried doing a Process->Generate Process Interface and Process->Run but nothing happens in BPM Studio when these are performed. What else do i need to do to test out my BPEL process with external webservice ?
Here's the steps i've taken so far.
1. Developed a simple external webservice with netbeans (JAX-WS).
2. Generated WSDL and XSD with wsgen executable.
3. Developed WSDL & XSD for BPEL Process request & reply.
4. Created a new project within BPM Studio.
5. Created a new module under "Catalog" for wsdl introspection.
6. Cataloged webservice component with local wsdl/xsd files.
7. Configured the Server configuration generated under the "External Resources" to point to the webservice host.
8. Configured the web service under "External Resources" to point to the webservice endpoint on the host (Server configuration)
9. Created a new BPEL Process.
10. Created new Instance variables for the process input and output as "component" type that point to the introspected request & response types.
11. Assigned the port type & method of the BPEL Receive to the introspected service defined in #3.
12. Assinged the input variable to the request variable created in #10.
13. Assigned port type & method & output variable to the BPEL reply.
14. Created a BPEL Invoke node between Request & Reply.
15. Assigned port type & method on the Invoke node to instrospected web service defined in #2.
16. Created instance variables for input & output of invoke node based on introspected request & reply
17. Assigned input & output.
Once all of this was complete, doing a Process->Check Design yeilded no errors or warnings.
Thanks for any help,
Chris

BPM Studio 11.1.1.5 Install Issues

Greetings,
I am trying to work with BPM Studio 11g but have been unsuccessful at getting the extensions installed correctly with JDeveloper 11g. I have a fresh installation of JDeveloper 11.1.1.5 and installed the BPM Studio extensions for JDeveloper via Help>Check for updates in JDeveloper. The download and installation process appeared to work fine however when I try to utilize the BPM functionality in most circumstances nothing happens or the options are not available. The BPM Analyst role is available via Tools>Preferences>Roles and the option to create a BPM Application/Project also seems to work, but not much else. I noticed a list of warnings in the JDeveloper 'extensions' log window that suggests the extensions weren't installed correctly. I've uninstalled JDev and installed 11.1.1.3 with BPM Studio extensions and I get the same issues. I'm not sure what to do at this point.. Any help would be greatly appreciated!
These are the warnings in the 'extensions' window:
-oracle.bpm.bpa
Warning: Classpath entry C:\Oracle\Middleware\jdeveloper\integration\lib\bpm-ide-common.jar not found.
Warning: Classpath entry C:\Oracle\Middleware\jdeveloper\integration\lib\bpa\bpa-common.jar not found.
Warning: Classpath entry C:\Oracle\Middleware\jdeveloper\integration\lib\bpa\bpa-exportImpl.jar not found.
Warning: Classpath entry C:\Oracle\Middleware\pcbpel\fabric\lib\orawsdl.jar not found.
Warning: Classpath entry C:\Oracle\Middleware\jdeveloper\soa\modules\oracle.rules_11.1.1\rulesdk2.jar not found.
-oracle.bpm.bpm-services.client
Warning: Classpath entry C:\Oracle\Middleware\jdeveloper\soa\modules\oracle.soa.workflow_11.1.1\bpm-services.jar not found.
Warning: Classpath entry C:\Oracle\Middleware\pcbpel\lib\j2ee\orasaaj.jar not found.
Warning: Classpath entry C:\Oracle\Middleware\pcbpel\generated\jrf\orasaaj-rt.jar not found.
Warning: Classpath entry C:\Oracle\Middleware\pcbpel\generated\jrf\wsclient.jar not found.
Warning: Classpath entry C:\Oracle\Middleware\pcbpel\generated\jrf\wsclient-rt.jar not found.
-oracle.bpm.bpm-services.interface
Warning: Classpath entry C:\Oracle\Middleware\jdeveloper\soa\modules\oracle.soa.workflow_11.1.1\bpm-services.jar not found.
-oracle.bpm.casemanagement.implementation
Warning: Classpath entry C:\Oracle\Middleware\jdeveloper\soa\modules\oracle.soa.workflow_11.1.1\bpm-services.jar not found.
Warning: Classpath entry C:\Oracle\Middleware\pcbpel\lib\j2ee\javax.persistence_1.0.0.0_1-0-2.jar not found.
Warning: Classpath entry C:\Oracle\Middleware\pcbpel\fabric\lib\orawsdl.jar not found.
-oracle.bpm.compiler
Warning: Classpath entry C:\Oracle\Middleware\jdeveloper\jdev\extensions\oracle.bpm.compiler.jar!\ade_autofs\nfsdo_base\JDK6\MAIN\LINUX\110210.1.6.0.24.B50\jdk6\lib\tools.jar not found.
-oracle.bpm.fusion.jdeveloper
Warning: Classpath entry C:\Oracle\Middleware\jdeveloper\soa\modules\oracle.bpm.activityguide-ui_11.1.1.jar not found.
-oracle.bpm.fusion.repository
Warning: Classpath entry C:\Oracle\Middleware\jdeveloper\integration\lib\bpm-ide-common.jar not found.
-oracle.bpm.fusion.scac
Warning: Classpath entry C:\Oracle\Middleware\jdeveloper\soa\modules\oracle.soa.fabric_11.1.1\soa-infra-tools.jar not found.
Warning: Classpath entry C:\Oracle\Middleware\jdeveloper\soa\modules\oracle.soa.fabric_11.1.1\testfwk-xbeans.jar not found.
-oracle.bpm.fusion.studio
Warning: Classpath entry C:\Oracle\Middleware\jdeveloper\integration\lib\bpm-ide-common.jar not found.
-oracle.bpm.lib
Warning: Classpath entry C:\Oracle\Middleware\jdeveloper\soa\modules\commons-fileupload-1.1.jar not found.
-oracle.bpm.metadata
Warning: Classpath entry C:\Oracle\Middleware\jdeveloper\soa\modules\oracle.soa.workflow_11.1.1\bpm-services.jar not found.
-oracle.bpm.obpi
Warning: Classpath entry C:\Oracle\Middleware\jdeveloper\soa\modules\oracle.soa.workflow_11.1.1\bpm-services.jar not found.
-oracle.bpm.pml.service
Warning: Classpath entry C:\Oracle\Middleware\pcbpel\fabric\lib\soa-infra-mgmt.jar not found.
-oracle.bpm.project.catalog
Warning: Classpath entry C:\Oracle\Middleware\jdeveloper\soa\modules\oracle.rules_11.1.1\rulesdk2.jar not found.
Warning: Classpath entry C:\Oracle\Middleware\jdeveloper\soa\modules\oracle.soa.workflow_11.1.1\bpm-services.jar not found.
Warning: Classpath entry C:\Oracle\Middleware\jdeveloper\soa\modules\oracle.rules_11.1.1\rl.jar not found.
Warning: Classpath entry C:\Oracle\Middleware\jdeveloper\jdev\lib\adfm.jar not found.
Warning: Classpath entry C:\Oracle\Middleware\jdeveloper\jdev\lib\ojdbc6dms.jar not found.
Warning: Classpath entry C:\Oracle\Middleware\pcbpel\generated\jrf\dms.jar not found.
Warning: Classpath entry C:\Oracle\Middleware\jdeveloper\lib\ojdl.jar not found.
-oracle.bpm.soa.humantask
Warning: Classpath entry C:\Oracle\Middleware\jdeveloper\soa\modules\oracle.soa.workflow_11.1.1\bpm-services.jar not found.

Hi,
If you can't connect to the internet from your JDeveloper, you can directly download JDeveloper extensions from the below link, and point the Check for Updates wizard to the local file you have downloaded.
http://download-llnw.oracle.com/otn-pub/jdeveloper/11.1.1.5.0/extensions/bpm-jdev-extension.zip
Thanks
Rama

Problem while configuring OSB External Resource in BPM Studio

Hi
I have just started using the BPM Studio 10.1.3. I want to invoke my Oracle Service Bus proxy services from one of the activities in the BPM Process flow.
I created an external resource of type Oracle Service Bus and while trying to catalogue the OSB Component I found that only my WSDL Web Service proxy services with http transport protocol are available to be catalogued. I couldnt find the proxy services of the type Messaging Service, Any SOAP Service, Any XML Service created on Oracle Service Bus.
Am I missing anything in the configuration or is it that BPM Studio does not support these protocols(jms,mq etc).
Also, in the Studio Reference there is a mention of Oracle BPM(native) transport that BPM supports for cataloguing OSB Components apart from http and https.
What is this protocol and how and where can i configure the same to help me catalogue the other OSB proxies?

Hi
I have just started using the BPM Studio 10.1.3. I want to invoke my Oracle Service Bus proxy services from one of the activities in the BPM Process flow.
I created an external resource of type Oracle Service Bus and while trying to catalogue the OSB Component I found that only my WSDL Web Service proxy services with http transport protocol are available to be catalogued. I couldnt find the proxy services of the type Messaging Service, Any SOAP Service, Any XML Service created on Oracle Service Bus.
Am I missing anything in the configuration or is it that BPM Studio does not support these protocols(jms,mq etc).
Also, in the Studio Reference there is a mention of Oracle BPM(native) transport that BPM supports for cataloguing OSB Components apart from http and https.
What is this protocol and how and where can i configure the same to help me catalogue the other OSB proxies?

How to get the papi wsdl of Oracle BPM Studio

How to get the papi wsdl of Oracle BPM Studio. What is the url of the papi wsdl of Oracle BPM Studio

Thanks to Lovin:
There is an icon in the studio when the engine starts.. called as "Launch Deployed Webservice webapp"
Also.. Need to go to Engine Preferences -> Engine -> Advanced Tab -> Startup and select Start PAPI Web Services.
Default URL:http://localhost:8585/papiws/PapiWebServiceEndpoint?wsdl

How to kill an instance process in BPM studio 6.0

Hi i'm Fabio.
I'm working on BPM Studio 6.0 and i need to complete a task.
I have an instance id process, and i need to create a new process in order to kill this istance id.
I read how to create a PAPI client (http://download.oracle.com/docs/cd/E13154_01/bpm/docs65/papi/index.html?t=modules/papi/c_Writing_Your_First_Java_PAPI_Program.html) but it doesn't work for my purpose.
First of all, i understood that i have to follow these step:
* Import the required libraries.
* Create a process service.
* Create a process service session.
* Perform operations with PAPI.
* Close the process service.
Now, i'm working on my xpdl file and i'm using the Standard Module "Fuego" and my plan is to create a process servcie, a process service session and then operate with PAPI.
But using the PAPI module include in the BPM studio 6.0 i'm no able to load the library for the session import fuego.papi.ProcessServiceSession;
so i'm worng something. Could you tell me how can menage this problem? Really do i need a session? Is possible to abort an istance process in BPM studio or i need to load my ear project in Enterprise environment and then kill my instance process? Thanks, regards Fabio.

Thanks Dan, i read your suggestion but my boss was to implement a different solution:
package hp.abort.process;
import fuego.boot.*;
import fuego.papi.CommunicationException;
import fuego.papi.InstanceInfo;
import fuego.papi.InstanceId;
import fuego.papi.ProcessService;
import fuego.papi.ProcessServiceSession;
import fuego.papi.OperationException;
import java.util.Properties;
import javax.transaction.*;
import java.lang.Exception;
public class AbortProcess {
public static void main(String[] args) {
/////////////////// API Initialization ///////////////////
Properties configuration = new Properties();
configuration.setProperty(ProcessService.DIRECTORY_ID, "default");
configuration.setProperty(ProcessService.PROJECT_PATH, "C:/Documents and Settings/Administrator/AlbpmWorkspace/EarOMatic");
configuration.setProperty(ProcessService.WORKING_FOLDER, "C:/tmp");
try {
ProcessService processService = ProcessService.create(configuration);
/////////////////// Establish a session ///////////////////
ProcessServiceSession session = processService.createSession("adminEarOMatic", "adminEarOMatic", "localhost");
/////////////////// Operate with PAPI ///////////////////
for (String processId : session.processesGetIds()) {
System.out.println("\n Process: " + processId);
for (InstanceInfo instance : session.processGetInstances(processId) ) {
System.out.println(" -> " + instance.getId());
System.out.println("ActivityName -> " + instance.getActivityName());
System.out.println("ActivityId -> "+ instance.getActivityId());
//Problema: nn vuole ActivityId ma Process Id
session.activityAbort("/CreateEurekaSRService#Default-1.0/eomWait","/CreateEurekaSRService#Default-1.0/1/0@EarOMatic");
/////////////////// Close the session ///////////////////
session.close();
/////////////////// Release API Resources ///////////////////
processService.close();
} catch (CommunicationException e) {
System.out.println("Could not connect to Directory Service");
e.printStackTrace();
} catch (OperationException e) {
System.out.println("Could not perform the requested operation");
e.printStackTrace();
Now, i got the following exception:
Local folder C:/tmp\system\Schema-4154784351820594721\catalogs found.
Loading catalogs from local folder: C:/tmp\system\Schema-4154784351820594721\catalogs
0 jars found locally.
[CatalogMgrCache] =======================
Registering CatalogMgr [EarOMatic] ...CatalogManagerCache 10390580:
Managers:
Counters:
[CatalogMgrCache] =======================
CatalogMgr [EarOMatic] REGISTERED!CatalogManagerCache 10390580:
Managers:
{EarOMatic=fuego.util.LocalCatalogManager@106df95}
Counters:
Process: /AbortInstanceProcessService#Default-1.0
Unreachable Engine Tolerance (seconds):
by default: 0
to be used: 0
This papi client will not cache exceptions which imply that an engine could not be reached.
Changing InstanceCache Entry[processId=/AbortInstanceProcessService#Default-1.0, state=0] to 3
Changing InstanceCache Entry[processId=/AbortInstanceProcessService#Default-1.0, state=3] to 2
Process: /CreateEurekaSRService#Default-1.0
Changing InstanceCache Entry[processId=/CreateEurekaSRService#Default-1.0, state=0] to 3
Changing InstanceCache Entry[processId=/CreateEurekaSRService#Default-1.0, state=3] to 2
-> /CreateEurekaSRService#Default-1.0/1/0
ActivityName -> eomWait
Adding local catalog for project: 1
ActivityId -> /CreateEurekaSRService#Default-1.0/eomWait
Exception in thread "main" fuego.server.exception.InvalidIdRuntimeException: Invalid identification.
Detail:Invalid identification (Identification value: /CreateEurekaSRService#Default-1.0/eomWait)
     at fuego.server.ActiveProcessImpl.getActivity(ActiveProcessImpl.java:632)
     at fuego.server.execution.microactivity.AbstractProcessExecutionHandler.getExecutableActivity(AbstractProcessExecutionHandler.java:58)
     at fuego.server.AbstractProcessBean.abortActivity(AbstractProcessBean.java:3262)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at fuego.lang.JavaClass.invokeMethod(JavaClass.java:1410)
     at fuego.lang.JavaObject.invoke(JavaObject.java:227)
     at fuego.component.Message.process(Message.java:587)
     at fuego.component.ExecutionThread.processMessage(ExecutionThread.java:778)
     at fuego.component.ExecutionThread.processBatch(ExecutionThread.java:753)
     at fuego.component.ExecutionThread.doProcessBatch(ExecutionThread.java:142)
     at fuego.component.ExecutionThread.doProcessBatch(ExecutionThread.java:134)
     at fuego.fengine.FEngineProcessBean.processBatch(FEngineProcessBean.java:248)
     at fuego.component.ExecutionThread.work(ExecutionThread.java:837)
     at fuego.component.ExecutionThread.run(ExecutionThread.java:408)
     at fuego.component.CustomExecution.next(CustomExecution.java:172)
     at fuego.component.ExecutorClient.invoke(ExecutorClient.java:118)
     at fuego.papi.impl.rmi.ProcessControlProxy.abortActivity(ProcessControlProxy.java:407)
     at fuego.papi.impl.rmi.ProcessControlProxyWrapper.abortActivity(ProcessControlProxyWrapper.java:683)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at fuego.papi.impl.AbstractProcessControlHandler.invokeInternal(AbstractProcessControlHandler.java:72)
     at fuego.papi.impl.rmi.RMIProcessControlHandler.invoke(RMIProcessControlHandler.java:165)
     at $Proxy23.abortActivity(Unknown Source)
     at fuego.papi.impl.ProcessInstanceOperation.abortActivity(ProcessInstanceOperation.java:726)
     at fuego.papi.impl.ProcessServiceSessionImpl.activityAbort(ProcessServiceSessionImpl.java:184)
     at hp.abort.process.AbortProcess.main(AbortProcess.java:45)
Caused by: fuego.metadata.exception.InvalidIdException: Activity '/CreateEurekaSRService#Default-1.0/eomWait' was not found in process '/CreateEurekaSRService#Default-1.0'.
     at fuego.metadata.Process.getActivity(Process.java:261)
     at fuego.server.ActiveProcessImpl.getActivity(ActiveProcessImpl.java:629)
     at fuego.server.execution.microactivity.AbstractProcessExecutionHandler.getExecutableActivity(AbstractProcessExecutionHandler.java:58)
     at fuego.server.AbstractProcessBean.abortActivity(AbstractProcessBean.java:3262)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at fuego.lang.JavaClass.invokeMethod(JavaClass.java:1410)
     at fuego.lang.JavaObject.invoke(JavaObject.java:227)
     at fuego.component.Message.process(Message.java:587)
     at fuego.component.ExecutionThread.processMessage(ExecutionThread.java:778)
     at fuego.component.ExecutionThread.processBatch(ExecutionThread.java:753)
     at fuego.component.ExecutionThread.doProcessBatch(ExecutionThread.java:142)
     at fuego.component.ExecutionThread.doProcessBatch(ExecutionThread.java:134)
     at fuego.fengine.FEngineProcessBean.processBatch(FEngineProcessBean.java:248)
     at fuego.component.ExecutionThread.work(ExecutionThread.java:837)
     at fuego.component.ExecutionThread.run(ExecutionThread.java:408)
I understood that tha activity id's format is not valid, but i obtained it just using the following function: instance.getActivityId()
Are you abel to give me some suggestion? Is it good this method to kill instance?
Thanks a lot, regard Fabio.

DataSource in BPM Studio

Hi,
Help please, how to use the DataSource in PBL (or BPM Studio) when deploying the application, use the DataSource configured in the WebLogic to connect to the database.
In BPM Studio, I have set up an external resource to connect to the database, in addition I'm using BPM Studio wrap to separate business and data layers.
Thanks for any help or tip

Hi
Yes, ofcourse you have option for this. We have like 2 types: ProcessDataObjects and ProjectDataObjects. Project Data Objects are used across any different Processes. But processdatabojects are only in that Process. BUT the limitation is, all these multiple Processes are in the SAME workflow project. Because they all share same XSD folder. If you have mutlipe different projects you cannot share them. Unless if the data is really usable, I will not go for the ProejctDataObjects scope.
We have some issues, in having multiple Processes in single Workflow Project. One straight forward thing is, I CANNOT have single separate deployment files SCA Jar for my own process. There is one giant single SCA JAR file that deploys all the Processes in that project. Say I modify only ProcessXYZ, but I cannot deploy that alone.
Thanks
Ravi Jegga

OBPM BPM Studio support for SOAP 1.2 based Proxy services (OSB)

Hi,
I tried to import proxy services from OSB (as external resource). The proxy service is based on the SOAP 1.2 WSDL standard. When BPM studio introspective SOAP1.2 based proxy services, it is givng the following warninigs. Bacause of this i am unable to create a service object. Please help.
Regards,
Pandu
Introspecting...
downloading /sbresource?PROXY/RoutingAndMessagingService/proxy/OnRampService
parsing /sbresource?PROXY/RoutingAndMessagingService/proxy/OnRampService
[Warning] unknown tag 'header' from 'http://schemas.xmlsoap.org/wsdl/soap12/'.
[Warning] unknown tag 'header' from 'http://schemas.xmlsoap.org/wsdl/soap12/'.
checking /sbresource?PROXY/RoutingAndMessagingService/proxy/OnRampService
parsing http://localhost:7002/sbresource?PROXY%2FRoutingAndMessagingService%2Fproxy%2FOnRampService%3ASCHEMA%2FSchemas%2Finternal%2Fwsdlmessages%2Futilityservices%2Froutingandmessagingservice%2FRoute
analyzing http://localhost:7002/sbresource?PROXY%2FRoutingAndMessagingService%2Fproxy%2FOnRampService%3ASCHEMA%2FSchemas%2Finternal%2Fwsdlmessages%2Futilityservices%2Froutingandmessagingservice%2FRoute
parsing http://localhost:7002/sbresource?PROXY%2FRoutingAndMessagingService%2Fproxy%2FOnRampService%3ASCHEMA%2FSchemas%2Finternal%2Fwsdlheaders%2FHeaderSchema
analyzing http://localhost:7002/sbresource?PROXY%2FRoutingAndMessagingService%2Fproxy%2FOnRampService%3ASCHEMA%2FSchemas%2Finternal%2Fwsdlheaders%2FHeaderSchema
parsing http://localhost:7002/sbresource?PROXY%2FRoutingAndMessagingService%2Fproxy%2FOnRampService%3ASCHEMA%2FSchemas%2Finternal%2Fwsdltypes%2Fcommon%2FHeaderTypes
analyzing http://localhost:7002/sbresource?PROXY%2FRoutingAndMessagingService%2Fproxy%2FOnRampService%3ASCHEMA%2FSchemas%2Finternal%2Fwsdltypes%2Fcommon%2FHeaderTypes
parsing http://localhost:7002/sbresource?PROXY%2FRoutingAndMessagingService%2Fproxy%2FOnRampService%3ASCHEMA%2FSchemas%2Finternal%2Fwsdltypes%2Fcommon%2FSimpleTypes
analyzing http://localhost:7002/sbresource?PROXY%2FRoutingAndMessagingService%2Fproxy%2FOnRampService%3ASCHEMA%2FSchemas%2Finternal%2Fwsdltypes%2Fcommon%2FSimpleTypes
http://www.michaelpage.com/wsdltypes/common/SimpleTypesv1.0 compiled
http://www.michaelpage.com/wsdltypes/common/HeaderTypesv1.0 compiled
http://www.michaelpage.com/wsdlheaders/Headerv1.0 compiled
http://www.michaelpage.com/wsdlmessages/utilityservices/Routev1.0 compiled
[Warning] The binding 'OnRampServiceSOAP' with type 's2:OnRampServicePort'is unsupported. Components will not be generaded for this binding..
'http://www.michaelpage.com/wsdl/utilityservices/routingandmessagingservice/OnRampServicev1.0/' was parsed.
Analyzing dependecies for module 'WS.OnRampService'...
Analyzing dependecies for module 'WS.OnRampService'...
Analyzing Components
Storing Instrospected Types
Introspection completed. Errors: 0, Warnings: 3.

Pandu,
OBPM 10g doesn't support SOAP 1.2 binding.
Edited by: 4dyomi on Nov 20, 2009 11:41 AM
Edited by: 4dyomi on Nov 20, 2009 11:42 AM

BPM Studio

Similar Messages

Maybe you are looking for