BPM where if a Idoc fails i need to resend it

hi all
I need to have a BPM where if a Idoc fails i need to resend it ..on the receiver side i m having a SOAP Adapter...
How can i do it...?
thanx
with regards
shivanjali

Hi Michal
The receiver application is just returning an error message (e.g. locked) and expecting XI or ALE to deal with it.
Do we have to use BPM like for certain errors we re-submit message a number of times with a delay, and for others we raise an alert. any alternative for BPM by ALE ?
With Regards
Shivanjali

Similar Messages

The BPM Workspace is loading and failing to initialize the directory.xml

Hi BPM Specialists,
I installed BPM along with SOA suit in Windows XP box. Now I am getting failing to initialize directory.xml error and the workspace is not getting loaded.I am not able to locate a directory.xml file in my installed directory. Please let me know what needs to be done.Thanks a lot in adavance.
Initializing PAPI services...
<May 3, 2011 1:10:23 PM IST> <Error> <oracle.bpm.common> <BEA-000000> <directory configuration runtime fails to initilize with resource: ..\config\directory.xml
java.lang.IllegalStateException: directory configuration runtime fails to initilize with resource: ..\config\directory.xml
at fuego.directory.DirectoryConfigurationManager.getDirectoryConfiguration(DirectoryConfigurationManager.java:335)
at fuego.directory.DirectoryConfigurationManager.getDirectoryConfigType(DirectoryConfigurationManager.java:313)
at fuego.directory.provider.Factory.getDirectoryFactory(Factory.java:216)
at fuego.directory.Directory.startAnonymousSession(Directory.java:211)
at fuego.papi.impl.ProcessServiceFactoryImpl.obtainSchemaId(ProcessServiceFactoryImpl.java:193)
at fuego.papi.impl.ProcessServiceFactoryImpl.create(ProcessServiceFactoryImpl.java:75)
at fuego.papi.impl.ProcessServiceFactoryImpl.create(ProcessServiceFactoryImpl.java:63)
at fuego.papi.ProcessService.create(ProcessService.java:335)
at oracle.bpm.workspace.adf.model.common.ADFWorkspaceEnvironment.initPAPI(ADFWorkspaceEnvironment.java:66)
at oracle.bpm.workspace.model.common.WorkspaceEnvironment.initialize(WorkspaceEnvironment.java:113)
at oracle.bpm.workspace.model.common.WorkspaceEnvironment.<init>(WorkspaceEnvironment.java:85)
at oracle.bpm.workspace.adf.model.common.ADFWorkspaceEnvironment.<init>(ADFWorkspaceEnvironment.java:37)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
at oracle.bpm.web.WebEnvironment.initialize(WebEnvironment.java:80)
at oracle.bpm.workspace.adf.ADFWorkspaceContextListener.contextInitialized(ADFWorkspaceContextListener.java:51)
at weblogic.servlet.internal.EventsManager$FireContextListenerAction.run(EventsManager.java:481)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.EventsManager.notifyContextCreatedEvent(EventsManager.java:181)
at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1872)
at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3153)
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1508)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:482)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:636)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:205)
at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:58)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:51)
at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:30)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
>
java.lang.IllegalStateException: directory configuration runtime fails to initilize with resource: ..\config\directory.xml
at fuego.directory.DirectoryConfigurationManager.getDirectoryConfiguration(DirectoryConfigurationManager.java:335)
at fuego.directory.DirectoryConfigurationManager.getDirectoryConfigType(DirectoryConfigurationManager.java:313)
at fuego.directory.provider.Factory.getDirectoryFactory(Factory.java:216)
at fuego.directory.Directory.startAnonymousSession(Directory.java:211)
at fuego.papi.impl.ProcessServiceFactoryImpl.obtainSchemaId(ProcessServiceFactoryImpl.java:193)
at fuego.papi.impl.ProcessServiceFactoryImpl.create(ProcessServiceFactoryImpl.java:75)
at fuego.papi.impl.ProcessServiceFactoryImpl.create(ProcessServiceFactoryImpl.java:63)
at fuego.papi.ProcessService.create(ProcessService.java:335)
at oracle.bpm.workspace.adf.model.common.ADFWorkspaceEnvironment.initPAPI(ADFWorkspaceEnvironment.java:66)
at oracle.bpm.workspace.model.common.WorkspaceEnvironment.initialize(WorkspaceEnvironment.java:113)
at oracle.bpm.workspace.model.common.WorkspaceEnvironment.<init>(WorkspaceEnvironment.java:85)
at oracle.bpm.workspace.adf.model.common.ADFWorkspaceEnvironment.<init>(ADFWorkspaceEnvironment.java:37)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
at oracle.bpm.web.WebEnvironment.initialize(WebEnvironment.java:80)
at oracle.bpm.workspace.adf.ADFWorkspaceContextListener.contextInitialized(ADFWorkspaceContextListener.java:51)
at weblogic.servlet.internal.EventsManager$FireContextListenerAction.run(EventsManager.java:481)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.EventsManager.notifyContextCreatedEvent(EventsManager.java:181)
at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1872)
at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3153)
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1508)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:482)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:636)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:205)
at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:58)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:51)
at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:30)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
java.lang.reflect.InvocationTargetException
<May 3, 2011 1:10:23 PM IST> <Error> <oracle.bpm.common> <BEA-000000> <WorkSpace failed on Startup.>
<May 3, 2011 1:10:23 PM IST> <Warning> <HTTP> <BEA-101162> <User defined listener oracle.bpm.workspace.adf.ADFWorkspaceContextListener failed: oracle.bpm.lang.exception.ProgramException: WorkSpaceWorkSpace failed on Startup..
oracle.bpm.lang.exception.ProgramException: WorkSpaceWorkSpace failed on Startup.
at oracle.bpm.lang.exception.ProgramException.wrap(ProgramException.java:54)
at oracle.bpm.workspace.adf.ADFWorkspaceContextListener.contextInitialized(ADFWorkspaceContextListener.java:55)
at weblogic.servlet.internal.EventsManager$FireContextListenerAction.run(EventsManager.java:481)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
Truncated. see log file for complete stacktrace
Caused By: java.lang.reflect.InvocationTargetException
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
at oracle.bpm.web.WebEnvironment.initialize(WebEnvironment.java:80)
Truncated. see log file for complete stacktrace
Caused By: java.lang.RuntimeException: Critical Error.
Detail:
directory configuration runtime fails to initilize with resource: ..\config\directory.xml

Thanks a lot for you reply.
I have installed OBPM 11g along with SOA suit.So whenever I am trying to restart the WL server, the log is showing the error where it is not able to initialize the directory.xml.
Could you please let me know what else can be done?

Automated error email notification when outbound IDOC fails

Hi,
The requirement is that whenever the outbound IDOC of message type PAYEXT, basic type PEXR2002, fails, then email has to be trigerred to a group id.
I had suggested to write a report program that runs as a job. If the IDOC goes to error status then mail will be sent from this report. Client prefers it to be done through workflow.
There is a standard process code for outbound IDOC failure handling EDIO (we40). standard task 7989 has been assigned to this process code. I dont want to modify this standard task as I am not sure of impact.
Terminating event for this task is 'ERRORPROCESSCOMPLETD'.
I have developed the workflow that has trigerring event 'ERRORPROCESSCOMPLETD' and bound with the IDOC number. This will send mail to the group id with the IDOC details
Now issue is that, I am not sure if standard process EDIO will be trigerred automatically, or should we configure anywhere. Since this is standard outbound IDOC, I am not able to add the process code in partner profile.
Please give your inputs or any other alternate solution to send mail through workflow when outbound IDOC fails.
Thanks in advance.

Hi,
I guess in your outbound partner profile for PAYEXT. you need to add process code EDIO in message control TAb. WHich will cause to trigger the workflow which will send the notification.

BPM Abstract Interface for IDOC?

Hi all,
I am doing an IDOC XI File scenario with BPM.
I have created an Inbound Asynchronous and an Abstract Interface for the LEGACY SYSTEM(Target Message).
I didn't create any Abstract interface for the IDOC(Source message).
I am getting this error:
<b>"Expression must return the interface type DEBMAS.DEBMAS06.DEBMAS06".</b>
Do I need to create an Abstarct Interface for the IDOC?
According to the above error, BPM is expecting an ABSTRACT INTERFACE Type for the IDOC.
Experts need help from you.
Thank you,
Joslyn.

That mapping is an dummy mapping between Idoc to Abstract Idoc Type. Here Sender Idoc Interface is mapped with Reciever Abstract Idoc interface.
So inside the BPM, Abstract Idoc interface acts as a Container variable to collect the idocs.
For simplicity-for collection of idocs
You can see, BPMPatterns from the SAP BASIS Software Component in your XI Repository.
http://help.sap.com/saphelp_nw2004s/helpdata/en/08/16163ff8519a06e10000000a114084/frameset.htm
Regards,
Moorthy

Idoc failed but updated the data

Hello Gurus,
I have a issue where the inbound idoc has failed but it has updated the data in the scheduling agreement.
Kindly let me know how it is possible to update scheduling agreement when Idoc has status 51 ie failed.
Helpful answers will be rewarded
Thanks
Suresh

Hi,
I am also surprised data is updated when idoc is failed.
Please throw some thoughts on this.
Thanks
suresh

IDOC Failed - Error massage Deficit of PU IR quantity

Hi
I am getting IDoc failed with erros massage "Deficit of PU IR quantity "
What could be the reason.pleaseadvice.
Thanks
Ajit K Barik

You need to provide more detail e.g. IDoc type, message number etc. Look at the data in the IDoc and try posting a document based on this. Usually you will get the same error and understand why you are getting it.

Triggering a mail when ever a perticular inbound IDOC fails

Hi Experts,
Is there any way I can trigger mails whenevr an inbound idoc fails to update in r3.With reference to workflow etc
Regards,
Arnab

hi,
i think u need to check tcode swu3 for automatic workflow customizing and check in we40 (error AND STATUS PROCESSING) whether the processing code is assigned to the workflow task.
if it is assigned,the workflow will be automatically triggered and the mail will be sent to the user by itself.
ALE error handling uses workflow. A standard task is provided for each message type. Task TS20000051 is used for all BAPIs.
Workflow functions as follows:
A task (work item) is generated for the error handling and stored as a message in the inboxes of the employees responsible.
If one of these employees processes the work item, the standard task method for error handling is started. The user can, for example, restart IDoc processing.
If the IDoc is processed successfully, the work item is deleted from the inboxes of all the employees involved.
For this procedure to function, the employees responsible for a particular message type and partner (sender or receiver) must be defined as follows:
1. A hierarchy of organizational units (for example, "sales office") and positions (for example, "customer officer for customer X") is created and employees are assigned to it.
2. The standard tasks for error handling (for example, an error related to an inbound sales order) are assigned to the relevant organizational units or positions (for example, "sales office").
3. The organizational unit, position or employee responsible for dealing with the error are specified for each partner and message type in the partner profiles.
If an error occurs, the system determines:
1. The employees responsible using the staffing schedule of the organizational unit or position linked to the standard task.
2. The employees defined in the partner profiles (using position, user ID, or organizational unit).
3. The employees appearing in both groups represent those who will receive a work item in their inboxes.
regards,
pankaj singh

Mail to be triggered when IDOC fails

Hello experts,
I have created a responsibility and added list of user to it. I have been to WE20 and assigned responsibility to one of the logical system and message type "ORDERS". Whenever an IDOC with message type "ORDERS" fail, respective persons of responsibility shall get mail.
Please let me know what all I need to do.
Thanks,
Krishna.

Hi,
You can achive this in the following way,
1. create a custom workflow to send mail
2. go to Transaction WE42 and select your process code
3. Open the process code by double clicking
4. Here you can find the funtion module ( Identification field ) to process the inbound IDOC.
5. select the button attached with Identification
6. You can find there are several box..
    Select the 'Idoc' Box
7. Here you can find the
   Object Type
   Start Event
   End event
   Success Event
    You can can maintain the requrired event here which will trigger if any idoc failed.
    e.g.
    Object Type                         IDOCHRMD
    Start Event                         INPUTERROROCCURRED
    End event                           INPUTFINISHED
8. link this start event with your custom wokflow.
9. When ever the idoc fails event INPUTERROROCCURRED will trigger and this will start the custom workflow.
Hoping that this will help you.
Thanks and regards,
SNJY

Inbound idoc failing to reach SAP system.

Hi All,
We are upgrading our SAP system from release 700 to 730. Post upgrade we have identified that idocs which are supposed to reach SAP as inbound are failing in Biz Talk with below message.
Error details: Microsoft.ServiceModel.Channels.Common.XmlReaderParsingException: The segment name is not valid for the IDOCTYP, Release, or CIMTYP. Segment name: E2EDT37003GRP IDOCTYP: SHPMNT03 Release: 700 CIMTYP: . Ensure that your message xml validates against the operation schema.
This happening for only one inbound idoc which is using SHPMNT03 idoc.Whereas other inbound idoc which is using /AFS/ORDERS05 idoc is reaching SAP without any issues. I am bit confused why this is happening for idoc SHPMNT03.
Please let me know your thoughts.
Thanks,
Gowrinath.

Hi Ramya,
Thanks for your response.
In Biz Talk schema is designed for 700 release idoc.Whereas our system is upgraded to 731 release.
Hotfix is for Biz Talk. Can't we implement any solution in SAP side.
Thanks,
Gowrinath.

Making a IDoc fail IDoc

Hi all,
I have an user exit in an IDoc .
I need to make the IDoc fail for a particular condition.
The status record data is not flowing into the user exit, so i cannot change the status record, i suppose
Plz advise me what to do in this ??
Thanks and Regards,
Vivek ..

Vivek,
You need to be able to change the STATUS record of the IDOC in the exit, other wise it will not reflect in the IDOC.
If the status record is not available a work around could be to find out the table for the status record in the memory and assign that to a field symbols and then change the value.
Here is some information about ALE / IDOC.
Please check this online document for ALE and IDoc.
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEIO/BCMIDALEIO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEPRO/BCMIDALEPRO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFAALEQS/CABFAALEQS.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVEDISC/CAEDISCAP_STC.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVEDI/CAEDI.pdf
Also check this links for additional information.
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
IDOCS
http://idocs.de/www5/books/IDocBook/IDOCS_CHAP09-11.pdf
http://idocs.de/cookbooks/idoc/cb12_idoc_20_outbound/idoc_outbound_45_rsnast00/docu.htm
Regards,
Ravi
Note : Please mark all the helpful answers

How can i inform customer when an idoc fails?

Hi folks,
How can i inform customer when an idoc fails?? Is there any procedure where customer is informed immediately through mail???
Looking forward for your valuable suggestions to solve this..
Cheers,
Ram.

Go through the Link.
http://help.sap.com/saphelp_47x200/helpdata/en/dc/6b815e43d711d1893e0000e8323c4f/frameset.htm
It explains about active monitoring. You can schedule a Report providing A variant. In the variant you can select the Message type, Recepient type Etc and the USER to which the notification has to be sent and the error type for which the notification has to be sent.
Reward Points if useful
Regards,
Abhishek

How to get Alert IDOC fails in WE02?

Hi all,
Iam working FILE-XI-IDOC senario were client need to trigger an alert or any message if IDOC fails to post the data.
Manually we have to go and check in WE02,but with out looking there client want to know the error.Is it possible? if yes then how?
Regards,
Phani

Hi Phani
Normally you should set up the CCMS Monitoring on the receiving SAP Backend.
Find more information under
http://help.sap.com/saphelp_nw04/helpdata/en/90/c4b523c4c411d2a5ee0060087832f8/frameset.htm
Here you should also find possibilities to set up a mail in case of errors.
Regards Oliver

Hey there! So I plugged in my ipod to my computer and it didn't show up where it normally does. I need to update my song list. How can I make it appear? It doesn't come up in Iphoto. A few days ago my sispluggeditintoanothercomputerbutidon'tknowwhatshedid

Hey there! So I plugged in my ipod to my computer and it didn't show up where it normally does. I need to update my song list. How can I make it appear? It doesn't come up in iphoto either. A few days ago my sis plugged it into another computer but I don't know if she synched it to the other computer, and frankly, she won't remember. I have tried updating itunes, charging the ipod, restarting the ipod/computer, and the rest of what the apple site said to do. Ps I have the latest ipod touch
I need help stat! Please help!

I'd say your sister messed up and your iPod is toasted.
Think about it... She plugged it in to another computer, she doesn't remember what she did (yeah, right), and now your iPod is not being recognized by your computer...
Also take into consideration how old is your sister, and how much does she know about electronics?

Sometimes my iphone 5S produces low sound even on full volume level. Then i do restart it. But i am not sure where exactly the problem is? Need help.

Sometimes my iphone 5S produces low sound even on full volume level. Then i do restart it. But i am not sure where exactly the problem is? Need help.

Hi saiyed adil,
Thank you for contributing to the Apple Support Communities.
It appears that your iPhone 5s sometimes produces low sound, but a restart corrects it.
It can take some time to isolate and resolve intermittent issues like this one, and I'd recommend going through the steps in this guide the next time it occurs:
If you hear no sound or distorted sound from your iPhone, iPad, or iPod touch speaker - Apple Support
All the best,
Jeremy

IDoc failed with the error massaeg "Instance of object type could not be ch

Hi All
I am getting IDoc failed with the error massaeg "Instance of object type could not be changed"
Message type :PORDCR
Basic type : PORDCR05
Message no. BAPI003
Status : 51
All POs are get uploaded in SAP during Cut over activities only.
Please suggest on this.It will be a great help.
Thanks
Ajit

Hi
After uploading POs into SAP we are changing quantity and value in PO in Legacy system, and for this all IDocs are failed, subsequently these changes are not triggering to ECC.
Please help
Thanks
Ajit

BPM where if a Idoc fails i need to resend it

Similar Messages

Maybe you are looking for