BPS - Freezing lead columns in HTML web layouts
Hi all,
Is it possible somehow to freeze the lead columns in the HTML web layouts?
I know the freezing can be done in the OWC excel in place, but then I can't find how to make the hierarchical display possible for excel in the web? Is this somehow possible?
Thanks,
Rael
Hi
CAn you share the solution to this, we are also having similar issue at our end
Regards
Manga
Similar Messages
-
How do I change the width of a lead column in an enhanced layout ?
I have an enhanced layout in BPS that gets rendered in TPM (CRM2007) application.
I need to increase the width of a lead column in this layout. I saw a bunch of methods in a BADI UPX_LAYOUT_RENDER. There is one to manipulate XML and another to manipulate HTML. Are these my only options? or is there an easier way via config or another BADI?
Cheers
VijayCan you share if you have got a solution to this.
Regards
Manga -
Freeze a Column in WAD (Web Application Designer)
Hi,
I have a web template in WAD that has an analysis_item, which data provider (DP1). The data provider (DP1) has a query attached to it.
My goal is to be able to freeze a column (data column) in the analysis_item.
I looked at all the properties of the analysis_item, but I didn't find any properties that I can use to freeze a column. I saw another discussion thread on Freezing column and rows, but there wasn't an answer for it in that thread.
I even tried to search for a way to freeze a column using JavaScript , and I found the link below using CSS (cascading style sheet) to accomplish the freezing of a column for a non SAP web application. However, I was not able to figure out how to apply this method in WAD and specifically in the analysis_item.
http://web.tampabay.rr.com/bmerkey/examples/locked-column-csv.html
Do you know any method to freeze a column when displaying data via the analysis_item?
I would really appreciate any suggestion you have.
Thank you,
KatelynDear Katelyn Dang ,
Freeze column
On the properties tab select table. goto web item tab. in number of data columns displayed put value as 4. (you can change as per ur need).
Also go through thes links
http://web.tampabay.rr.com/bmerkey/examples/locked-column.css.html
http://web.tampabay.rr.com/bmerkey/examples/locked-column-csv.html
For visiblity
you can set visible rows and columns in the specific properties of web item table! Just click the table in the Web Application Designer and than look into the specific properties. Select "Number of Data Rows..." or "Number of Data Columns..." as you wish!
Hope it helps
Regards
Bala -
Freezing Planning Layout Lead Column (Web)
Good Afternoon
We are currently developing planning layouts using the web view rather than the Excel view.
My question: Has anyone implemented the freezing of the lead column in the web view (similar to the Excel view functionality)?
Thanks in advance.
AndrewHello Andrew,
have you tried using 2 layouts, one displaying only the lead column (no or hidden data column) and one displaying data columns (lead column hidden or minimized - only '.' displayed -).
I haven't tried it yet and it may not lock very nice, but you could hide columns, you do not want to see, with an separate <div> - layer or put the layouts in 2 iframes...
It was only a thought, that came up to me.
One problem would be, if the number of rows exceeds the screensize and the user wants to scroll down...
I hope I could help you to some ideas.
Regards
Steve -
Hi all,
I have the following question related to web layouts in sem-bps (non excel):
- I have several web layouts to enter data, but we have now user requirements related to copy, paste informations cells (manually) from and to EXCEL. The problem is that, using a simple alv layout this operation can't be done.
I've already searched possible ways to overcome this limitation, with no success (layout settings, by inclusion of some specific object, etc.)
Can anybody help me ?
Thanks,
RicardoHi Raman,
Sorry but your tip doesn't work
That's precisely our problem: the authorization scheme we implemented in the "SAP GUI side" doesn't work in the web side". Using web layouts, I still can acess some layouts I shouldn't be allowed to (user dependent)
Thank you anyway
Regards,
Ricardo -
Excel in Web layout: calculation of total after a cell change
Hi,
I'm using BW 3.5 with SEM BPS 4.0 and Excel in Web layouts. I can see the total rows/columns are not updating automatically after a cell change like it does in "normal html-web". User has to press refresh or save to update the totals. Any workarounds?
Thanks in advance!
Rgrds, AkiHi Aki,
no I mean in <u>Excel</u>.
When editing the layout, on the third screen, in excel, go to Tools->Options.
Then click on the "Calculation" Tab.
Calculation needs to be set to automatic otherwise you have to refresh to update any results for a given formula.
Hope this helps.
Pierre-Yves -
In Layoout how to see all the lead columns presented in that.
Hi Friends,
Could you please suggest me how to see all the lead columns presented in the Layout.
Appreciate your help through points.
Regards,
PJHi Ravi,
When I opend the layout in change mode we are able to see the Layout, when click on continue we can see Header area,lead coulmns,data columns. In Lead columns I am able to see only 20 rows only. But I want to see all rows in that lead columns. When click on continue we are able to see the layout in ALV grid format. In that we can see lot of rows. Now my question is How to see all the rows present in Lead columns. Still if you have any details please give me ur id I will send some screen shots or give ur no. I will talk to you.
Thanks & Regards,
PJ -
Can't Freeze Row/column in Web layout in Integrated planning
Hi Guys
we have 50 columns in planning query. Web layout screen can't present all these column in one screen . While scrolling for viewing rest of the columns the initial column(Description) disappears i.e scrolled out and hence it is very difficult to corelate which Key Figutre value (Value) represent which Object(InfoObject).
We need a way around of freezing of columns functionality which is available in BPS but not in BI IP.
Thanks for any helpful input
Thanks
Tripple kHi Tripple,
As you had pointed "We need a way around of freezing of columns functionality which is available in BPS" can you help me to understand where this setting can be achieved in BPS.
Thanking you in advance.
Regards
Jerry -
Error in executing a layout which has a hierarchy in lead column
Hi Experts,
I have used a planning level where a characteristic called 'reporting code' is restricted with a hierarchy.
Now when I am trying to execute a layout under this level I am getting some error. The characteristic is used in the lead column in this layout.Two differene type of error I am getting in following two different cases.
1. When I am using the hierarchical settings for the lead column then I am getting the error 'Hierarchy INPUT is not suited to the planning mode.
2. When I am not using the hierarchical settings for the lead column then I am getting the error 'Too many characteristic combinations for manual planning'.
If I reduce the no of nodes in the hierarchy for testing then none of this error is coming. So I think this is related to the volume of the hierarchy.
Can anybody put some light on this why this error is coming and how to resolve this error?
Regards,
Saikat Datta Gupta.In case of text hierarchies, wherein we can plan only on leaves, for the layout to be displayed in a hierarichal manner, we need the following settings.
In the first screen of the layout builder, next to the layout description, click on the hierarchy icon, choose non-hierarchical data model and in the additional settings, all possible char combinations.
In the last screen of the layout builder, in lead column settings, check display totals as hierarchy.
With the above settings, layout shows the result in hierarchy mode.
In BPS layout, the no of rows will be limited. As you have given all possible combinations, system tries to display the entire hierarchy, i think which is exceeding the max limit. Try reducing the hierarchy size or keep the additional settings as "Transaction data" and check if the problem persists. -
How to adjust width into BPS web Layout
Hi gurus,
I´m working with BPS web Interface. I have a tabstrip control subcomponent composed by 3 differents layouts and the web interface is composed by differents tabstrip.All of this layouts represents the same information but restricted to differents characteristic value. I need to align the data of those layouts, I mean the first column of the first layout should have the same width as the first column of the second layout etc.
The idea is adjust the width of the columns of each layout in this tabstrip control. How can I do that? Is possible do that with CSS Styles? If it is possible How can I do that?
Thanks in advance for your help.Hi,
Try this may be useful for you..
In the Web interface when you double click the layout , you can see the window at the bottom saying your component name ,planning area etc..at the bottom most you can see the Width and height , there you can increase or decrease .
before that make excel web component as 'True', then only you can increase or decrease ..
Regards,
Siva. -
How to open a Query in BPS Web-Layout
Hello,
i am new to BPS. How can I open a Query in BPS Web-Layout so that I can enter plan data manually??
Pls give me the procedure and not links to help.sap.com. Thanks.
pls help,
SDHi.
You can open bex query in BPS Web Layout, but you should update data via BPS layout.
In BPS Bex query can be opened only for display as long as BPS doesn't allow input via query (only BI7+IP).
In BPS Web Interface builder add subcomponent "text", set HTML=TRUE, goto property "text", press F4->edit long text and enter HTML tags IFRAME with URL of bex query.
Regards. -
How to change width columns in web layout?
hello,
I have problem with change width columns in web. I can change width column in paper layout and is ok but If I run web layout I get one column very wide and second thin. I cant find where I may this change
I find that is no easy. If you want change property in web layout you must edit JSP file, and you must know Java/JSP/HTML, and library reposrts JSP custom tag and reports xhtml tags.
regards
Edited by: user515960 on 2010-07-11 04:23Hi,
Please refer the below reference which may guide to configure the properties in search result webpart.
http://technet.microsoft.com/en-us/library/gg549987(v=office.15).aspx
If its not helping you please let us know.
Sekar - Our life is short, so help others to grow
Whenever you see a reply and if you think is helpful, click "Vote As Helpful"! And whenever
you see a reply being an answer to the question of the thread, click "Mark As Answer -
Multiple line selection in BPS web layout
Hello experts
I know there is a "row/column" option for layout in WIB, but it only provides the "radiobutton" but not "checkbox", hence I only can select single line in the layout but not the multiple lines.
anybody has idea to solve the problem?
Thanks PatrickPatrick, it's quite difficult to explain it, if you are not familiar with BSP
I can show only direction for you in such case, because whole implementation is quite hard and depends of you requirements.
In short, you should generate your application in WIB with "Generate class" set true and keep "Name of generated class" filled.
Then, you should go to se80, select BSP appication, enter name of your application, then, you will have layout2.htm in Views. This page implements web-layout. You should change HTML and ABAP coding for this page to put checkboxes and write some code to implement your business logic. -
How do I Freeze Columns in HTML Tables
How do I Freeze Columns in HTML Tables when scroll vertically as well as horizontally? (header and some columns on LHS). I generate a JSP report which got more than 1000 rows. Please advise. Thanks.
Gooooooooooooooooogle searched "Freeze Columns in HTML Tables"
So many solutions available !!!!!
see the 1st link
http://web.tampabay.rr.com/bmerkey/examples/locked-column-csv.html -
BPS: How to filter Lead Columns at run time
I need to know if there is a way to filter values for lead columns, after planning level and planning package where defined
Example:
Family | Material | Brand | Format | sales | cost | Margin
F1 M1 B1 F1 100 80 20
F1 M2 B1 F1 95 85 10
F1 M2 B1 F2 105 90 15
In this case the user wants to add 10% to sales and review how does it impact into margin, but he wants to apply it only to rows where Material is M1.
So, he needs to use some kind of filter data (like Excel functionality) to select only the rows corresponding to material M1.
After that, he wants to perform other filters over the other lead columns, and apply again some changes in the data columns.
Somebody can help me with this requirement?
Thanks in advance
Message was edited by: Pamela ValdiviaHi Pamela,
First of all you would need a variable for Material with Replacement type user defined values to be able to restrict the data for Material M1 when the layout is executed.
For incrementing the sales by 10% you can create a Planning function which increases the sales amount by 10% and provide a button for the same in the User Planning Folder. You could also restrict the Planning function for Material M1 if you so desire.
The benefit of the Planning function is that you can always "Undo" the operation if you have not saved/performed a subsequent operation. So as long as the user is applying some changes and undoing the same before the second change step the data is as it is, and for what changes the user would like to simulate you can create a Planning function and provide the option in the Planning folder.
Hope it helps.
Cheers
Anurag
Maybe you are looking for
-
Problem with Composer info/Album Artist/ tags & duplicate albums
I recently re-organized my iTunes library, which is on a network drive in my home. Since everything had gotten moved to new directories, I deleted all the songs from my iTunes library and re-imported everything. I've never been much of a playlist per
-
I went to iCloud and my mail doesn't recognize my password but even worst my iTunes does not want to open because it says my library is blocked somewhere on a hard disk where I have no access ... HELP HELP
-
Hi, While doing MIRO, the invoice and the details fetched from the PO (purchase order) match perfectly. Despite the details getting matched the invoice gets blocked for payment with the reason as R. Is this a standard SAP functionality or its customi
-
Automatic Output determination for PO for EDI
I have a requirement to generate IDOCs automatically when POs are created/changed (only for certain plants) and send this PO to a certain plant which is set up as a customer ( KU partner type in Partner profile ) I have done the following : 1) Create
-
Outlook contacts sync problem !!!
I exported all my phone numbers from my old phone to Outlook but when Itunes try to sync with Outlook I got the following message and nothing (none of my phone contacts) is transfered to my Iphone. Erros message: "error occurred remapping record iden