BPS keyboard lock issues

Hi all,
I've various layouts for forecasting.I execute the planning folder to enter forecasting values.
My problem is -
Sometimes when I log into the screen(after executing the plng folder) for the first time, the keyboard locks and you have to click on the check button to enable it. Can this be solved?
Any help will be appreciated.
Thanks in advance.
Isha

Hi,
This has happen to me very often...if you execute planning folders with excel as the front end.
The keyboard is not locked but even if a cell is selected and you enter digits...they just don't appear. Surprisingly, digits entered become part of the excel macros. When you press refresh the macro debugger gets started as the code (with the digits just added) is wrong. It's a nightmare.
This does not happen in all our computers. If you select a cell by double clicking over it...the system works fine.
Yes, strange but true.
Alberto Sabate

Similar Messages

Another keyboard lock issue: 8800, upgraded to 4.5

Evening folks,
I'm having a problem with locking my keyboard. I can assign the Convenience Key to lock the keyboard, but Alt-Enter won't do the job. I've removed the Alt-Enter option from the Language menu. I've also removed the battery, sim, and memory card for over 2 minutes and that didn't work either. Having the Conv key lock the keyboard is a pain because I have large hands and am always hitting the Conv key (and I'd rather have the Conv key load Google Maps). Anyone have any suggestions?

I have the same issue. It drives me crazy. Sometimes it goes away and sometimes it comes back. But when phone is in sleep, when I press a button, it takes sometimes up to 5 seconds before the screen turns on!

N8 Keyboard Lock Issue

Even if I have the display (settings/phone/display) screen/keylock time-out set to 30 minutes and the light time-out set to 60 seconds, the display goes dark and the keypad locks at 45 seconds.
Have I neglected some other setting, or do I have a defective unit?

Hi and welcome to the forums!
Unassign the convenience key,
Pull the battery with the phone on (no data will be lost) for 1 minute.
Replace, and let the reboot got for 1-3 minutes.
Reassign key, see if the problem is resolved.
Thanks
Please remember to resolve your thread. Put the check mark in the green box that contained your answer! Thanks
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Keyboard-lock of swing program on Linux box

We are developing swing program on Linux, and we often meet keyboard-lock issues.
I try to simplify some of them to small programs, and still meet keyboard-lock.
Here I post two programs to show the error:
//---first ----------------------------------------------
package test;
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import java.util.*;
public class KeyLock extends JFrame {
JPanel contentPanel = new JPanel();
JPanel wizardToolPan = new JPanel();
JButton btnBack = new JButton("Back");
JButton btnNext = new JButton("Next");
JButton btnAbout = new JButton("About");
public static final String aboutMsg =
 "<html> This program will help to find keyboard lock problems, two way to reproduce: " +
 "1 - press Alt+N to navigate next, and don't release keys untill there are no more next page, " +
 "then try Alt+B to navigate back and also don't release keys untill page 0, " +
 "repeat Alt+N and Alt+B again and again, keyboard will be locked during navigating. " +
 "2 - press Alt+A in main window, it will popup an about dialog, " +
 "then press down space key and don't release, " +
 "the about dialog will be closed and opened again and again, " +
 "keyboard will be locked sooner or later." +
 "</html>";
public KeyLock() {
 this.setDefaultCloseOperation(EXIT_ON_CLOSE);
 this.setTitle("Keyboard lock test");
 getContentPane().setLayout(new BorderLayout());
 btnBack.setMnemonic('B');
 btnBack.addActionListener(new ActionListener() {
 public void actionPerformed(ActionEvent e) {
 KeyLock.this.goBack(e);
 btnNext.setMnemonic('N');
 btnNext.addActionListener(new ActionListener() {
 public void actionPerformed(ActionEvent e) {
 KeyLock.this.goNext(e);
 btnAbout.setMnemonic('A');
 btnAbout.addActionListener(new ActionListener() {
 public void actionPerformed(ActionEvent e) {
 JOptionPane.showMessageDialog(KeyLock.this, aboutMsg, "About", JOptionPane.INFORMATION_MESSAGE);
 contentPanel.setLayout(new BorderLayout());
 contentPanel.setPreferredSize(new Dimension(400, 250));
 contentPanel.setMinimumSize(new Dimension(400, 250));
 wizardToolPan.setLayout(new FlowLayout());
 wizardToolPan.add(btnBack);
 wizardToolPan.add(btnNext);
 wizardToolPan.add(btnAbout);
 this.getContentPane().add(contentPanel, java.awt.BorderLayout.CENTER);
 this.getContentPane().add(wizardToolPan, java.awt.BorderLayout.SOUTH);
 this.setSize(400, 300);
 this.createContentPanels();
 this.showCurrent();
private Vector<JPanel> slides = new Vector<JPanel>();
private int current = 0;
private void createContentPanels() {
 for (int j = 0; j < 20; ++j) {
 JPanel p = new JPanel(new FlowLayout());
 p.add(new JLabel("Page: " + j));
 p.add(new JTextField("Page: " + j + ", input something here", 20));
 p.add(new JTextField("Page: " + j + ", input something here", 20));
 p.add(new JTextField("Page: " + j + ", input something here", 20));
 p.add(new JLabel("Input something in password box:"));
 p.add(new JPasswordField(20));
 p.add(new JCheckBox("Try click here, focus will be here."));
 p.add(new JRadioButton("Try click here, focus will be here."));
 slides.add(p);
public void showCurrent() {
 if (current < 0 || current >= slides.size())
 return;
 JPanel p = slides.get(current);
 this.contentPanel.add(p, java.awt.BorderLayout.CENTER);
 this.pack();
 Component[] comps = p.getComponents();
 if (comps.length > 0) {
 comps[0].requestFocus(); // try delete this line
 this.repaint();
public void goNext(ActionEvent e) {
 if (current + 1 >= slides.size())
 return;
 this.contentPanel.remove(slides.get(current));
 current++;
 sleep(100);
 this.showCurrent();
public void goBack(ActionEvent e) {
 if (current <= 0)
 return;
 this.contentPanel.remove(slides.get(current));
 current--;
 sleep(100);
 this.showCurrent();
public static void sleep(int millis) {
 try {
 Thread.sleep(millis);
 } catch (Exception e) {
 e.printStackTrace();
public static void main(String[] args) {
 KeyLock wizard = new KeyLock();
 wizard.setVisible(true);
}The first program will lead to keyboard-lock in RHEL 4 and red flag 5, both J2SE 5 and 6.
//---second -----------------------------------------
package test;
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
public class KeyFocusLost extends JFrame {
private JButton btnPopup = new JButton();
private JTextField jTextField1 = new JTextField();
private JPasswordField jPasswordField1 = new JPasswordField();
private JPanel jPanel1 = new JPanel();
private JScrollPane jScrollPane3 = new JScrollPane();
private JTree jTree1 = new JTree();
private JButton btnAbout = new JButton("About");
public static final String aboutMsg =
 "<html> This program is used to find keyboard focus lost problem. " +
 "Click 'popup' button in main window, or select any node in the tree and press F6, " +
 "a dialog popup, and click ok button in the dialog, " +
 "keyboard focus will lost in main window." +
 "</html>";
public KeyFocusLost() {
 this.setDefaultCloseOperation(EXIT_ON_CLOSE);
 this.setTitle("Keyboard focus test");
 getContentPane().setLayout(null);
 btnPopup.setBounds(new Rectangle(33, 482, 200, 35));
 btnPopup.setMnemonic('P');
 btnPopup.setText("Popup and lost focus");
 btnPopup.addActionListener(new ActionListener() {
 public void actionPerformed(ActionEvent e) {
 PopupDialog dlg = new PopupDialog(KeyFocusLost.this);
 dlg.setVisible(true);
 btnAbout.setBounds(new Rectangle(250, 482, 100, 35));
 btnAbout.setMnemonic('A');
 btnAbout.addActionListener(new ActionListener() {
 public void actionPerformed(ActionEvent e) {
 JOptionPane.showMessageDialog(KeyFocusLost.this, aboutMsg, "About", JOptionPane.INFORMATION_MESSAGE);
 jTextField1.setText("Try input here, and try input in password box below");
 jTextField1.setBounds(new Rectangle(14, 44, 319, 29));
 jPasswordField1.setBounds(new Rectangle(14, 96, 319, 29));
 jPanel1.setBounds(new Rectangle(14, 158, 287, 291));
 jPanel1.setLayout(new BorderLayout());
 jPanel1.add(new JLabel("Select any node in the tree and press F6."), java.awt.BorderLayout.NORTH);
 jPanel1.add(jScrollPane3, java.awt.BorderLayout.CENTER);
 jScrollPane3.getViewport().add(jTree1);
 Object actionKey = "popup";
 jTree1.getInputMap().put(KeyStroke.getKeyStroke(KeyEvent.VK_F6, 0), actionKey);
 jTree1.getActionMap().put(actionKey, new AbstractAction() {
 public void actionPerformed(ActionEvent e) {
 PopupDialog dlg = new PopupDialog(KeyFocusLost.this);
 dlg.setVisible(true);
 this.getContentPane().add(jTextField1);
 this.getContentPane().add(jPasswordField1);
 this.getContentPane().add(jPanel1);
 this.getContentPane().add(btnPopup);
 this.getContentPane().add(btnAbout);
public static void main(String[] args) {
 KeyFocusLost keytest = new KeyFocusLost();
 keytest.setSize(400, 600);
 keytest.setVisible(true);
static class PopupDialog extends JDialog {
 private JButton btnOk = new JButton();
 public PopupDialog(Frame owner) {
 super(owner, "popup dialog", true);
 setDefaultCloseOperation(DISPOSE_ON_CLOSE);
 this.getContentPane().setLayout(null);
 btnOk.setBounds(new Rectangle(100, 100, 200, 25));
 btnOk.setMnemonic('O');
 btnOk.setText("OK, then focus lost");
 btnOk.addActionListener(new ActionListener() {
 public void actionPerformed(ActionEvent e) {
 PopupDialog.this.getOwner().toFront();
 try {
 Thread.sleep(100); // try delete this line !!!
 } catch (Exception ex) {
 ex.printStackTrace();
 PopupDialog.this.dispose();
 this.getContentPane().add(btnOk);
 this.getRootPane().setDefaultButton(btnOk);
 this.setSize(400, 300);
}The second program will lead to keyboard-focus-lost in RHEL 3/4 and red flag 4/5, J2SE 5, not in J2SE 6.
And I also tried java demo program "SwingSet2" in red flag 5, met keyboard-lock too.
I guess it should be some kind of incompatibleness of J2SE with some Linux platform. Isn't it?
Please help, thanks.

Hi.
I have same problems on Ubuntu with Java 6 (all versions). I would like to use NetBeans or IntelliJ IDEA but it is not possible due to keyboard locks.
I posted this bug
https://bugs.launchpad.net/ubuntu/+bug/174281
before I found some info about it:
http://forums.java.net/jive/thread.jspa?messageID=189281
http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=6506617
http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=6568693
I don't know from which part this bug comes, but I wonder why it isn't fixed yet. Does anybody else use NetBeans or IntelliJ IDEA on linux with Java 6 ?
(I cannot insert link :\ )

Keyboard lock and unlock for 8330

I need a way to lock and unlock the keyboard. I have searched a number of websites for an answer to my dilema and it seems several methods are mentioned but none work for me. I need to lock the keyboard when phone is in my pocket. Many thanks to anyone who can help.

Well, according to your device manual, this is the procedure:
Lock the keyboard
If you do not set a BlackBerry® device password, you can lock your keyboard to avoid making calls and pressing keys accidentally.
On the Home screen or in the application list, click Keyboard Lock.
To unlock the keyboard, press the asterisk (*) key and the Send key.
You can look further into your manual here:
http://www.blackberry.com/btsc/microsites/search.do?cmd=displayKC&docType=kc&externalId=http--docsbl...
Good luck.
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Password lock verses keyboard lock

Help! I have a password set up to come on after 10 min. to lock my phone and now somehow when I press the lock key(a) my screen goes blank and it just locks the keyboard. What needs changed so that I can lock my phone using the a key again? I don't know how the keyboard lock even got turned on. Thanks!
Solved!
Go to Solution.

Try this KB.
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Storm 2 and Keyboard Lock?

I am wondering with current OS in the Storm 2, how is the keyboard lock compared to the changed keyboard lock with the other Blackberrys? I am trying to get either a Storm 2 or Droid Incredible if I can get Verizon Wireless to say it's okay to automatically change the Contract Date because I am unhappy with my Tour which I get near the end of 2009 and would like to switch w/o paying full price.
DJ

Hi and Welcome to the forums..
Have you tried a 'One way Sync' coming from the device to the computer only?
If your issue is resolved, put a checkmark in the green box that contains the resolution.
OR
If it was just/or also really helpful - Give it a Kudos.. Go on Mate.. Help the rest of the clueless blackberry user world find their answer too..
~Gday from Down Under~

Missing keyboard lock icon 8530

Just upgraded to new OS,missing keyboard lock icon. How do you lock keyboard?

Hello,
You have upgraded to the point where the function changed. To lock the keyboard, you now press (and quickly release) one of the hard keys on top (usually the power key). But, this is only a keyboard lock...not a full device lock. The only way a screen icon exists anymore is if you create a device lock password...then you would have an icon to activate that.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Keyboard locked in Caps

Hi all,
I have a small problem on my MBA (Late 2010) which is kind of annoying. Sometime, the keyboard decides to lock itself in Caps, and this without pressing on the shift or caps lock keys. In the middle of a sentence, if will decide to lock itself and that sometimes stays for a long time. Try to restart it when it does that, and it will boot in safe mode (as when you press shift during the starting process), minimze app and it will do that in slow motion, as when you press Shift. Not sure it is hardware as it does it without pressing the Caps keys at all.
It just appeared after upgrading to 10.6.7... not sure it is releted?
Any idea (I am not going to be near an Apple store and maintenance Center for a month at least).
thx

Thanks again for your replies. In fact, the USB keyboard is not and cannot be the problem, not sure I was very clear before. I used to use my MBA only with its own keyboard (no external keyboard plugged). Since I bought it, late december, I had absolutely no problem, but after doing the 10.6.7 update (and I am not saying that there is a relationship), I started having this problem of the Caps (SHIFT key) being locked. This is not all the time, but most of the time. For example today, it worked fine for 5 ours, and then in the middle of the afternoon, the keyboard locked itself in Caps (however, yesterday it was locked the whole day in Caps).
The consequences, despite the fact that I write with caps, are that:
1) minimizing any windows will be done in slow motion as if you press the SHIFT when doing so
2) when I restart the computer it will start in Safe boot mode as if SHIFT was pressed during start up.
3) I cannot select one file, email or folder, but it will select everything from the beginning to the one I clicked on, as if SHIFT was pressed when you select a file, mail or folder.
The only way I am able to use normally my MBA at the moment is by plugging a USB keyboard to it (and I only have a PC one, but this is not an issue). So the USB keyboard is not the cause, but a temporary (I hope) solution to my problem. I am sorry for not being clear enough in my previous post.
I did run a hardware test, I did run the disk utility, did the resets... but still the same problem is happening. I created the Test account, and same thing, when it is locking itself, I will have Caps only on both accounts, as well as on Windows 7 running under Parallels 6.
It is a pity because I love my MBA, which is my first Mac experience... Really annoying though when you are in a small country with no Apple reseller or maintenance center.

How can I make a "Keyboard Lock" while iTunes is playing?

How can I make a "Keyboard Lock" while iTunes or other apps are playing? They should work/play on, screen should still be on, only keyboard is (maybe Password-) locked.
Thanx in adv, tttimo

Menu > Apple > System Preferences > Keyboard > Keyboard Shortcuts Application Shortcuts > + > Application: Browse to Pages > Menu Title: Footnote > Keyboard Shortcut: hit combination of keys > Add
You will need to restart Pages but should then see it next to your Menu item.
Peter

Report Designer Locking issue

Hi,
We have found locking issue while accessing same report(Created in Report Designer) by multi users at a time .
Has anyone face this issue and How to fix it. It's major concern because same report can be accessed by multiusers at same time
Thanks
Siva

Siva,
only one person at a time has permission to open the report in the Report designer - just like with Queries in the query designer. This should not have any effect on you actually executing the report in the portal - multiple people can do it then.
this is a security issue that other software vendors use as well - just like you cannot open any MS Office files on the network for editing that someone has opened already.
Thanks

Locking issue in workflow with conseutive database update

Dear Workflowers,
We are in ECC 5.0 and release 6.40. We went live for SAP in February and we are currently using workflow in PLM module for DMS and ECM.
We have been facing this locking issue randomly happened in our production and quality system. The error from workflow log is "Document XXXX is locked by WF-BATCH". I have two steps in workflow one is to update the document user( from originator to editor with custom BO "zdraw" new method "setuser") and the next step is to update the document status( BO "zdraw" "setstatus" method which inherited form standard BO "draw").
I have tried to use "wait" (1st try) , statements "BAPI_DOCUMENT_ENQUEUE", "BAPI_DOCUMENT_DEQUEUE" (2nd try) and "Commit work and wait" (3rd try) to add one step in between, however the issue remains.
The other question I had was we need to write "commit work" when we use BAPI to perform database update in the ABAP program. But I don't see "commit work" in the method of BO(for example "setstatus" in "draw" object) which performs database update. How does workflow perform DB update properly without "commit work" by referencing standard method?
Could anyone please share your expertise with the issue I am facing?
Thank you in advance,
Merta

Hi Merta,
Regarding COMMITs: theoretically you should never use COMMIT statements because the Workflow runtime handles that - the transaction of executing the task is the LUW, not your method. By adding COMMIT WORK you are also committing the workflow task execution.
In practice however there are the occasional exceptions where something just won't work without an explicit commit - but the theory remains that you should always try it without.
Regarding your problem, the one way to be certain that a DB update is complete is to use a terminating event - either through change documents or status management.
Failing that, you can write a wrapper method for SETSTATUS that does something like:
do 10 times.
try to lock it.
if success.
    unlock.
    swc_call_method self 'SetStatus' container.
    set success flag.
else.
    wait up to 3 seconds.
endif.
enddo.
if no success, raise exception.
Cheers,
Mike

Locking Issue in Planning DSO in SAP BW 7.3(Integrated Planning)

Hi Experts,
We have built Aggregation Level on Direct Update (planning enabled) DSO and used the same in the input ready queries.( Its complete Manual planning - new row addition feature in WAD).
We have 5 characteristic and one key figure for planning.
We are facing lock issue while planning the data i.e. when one user is planning, other user cannot plan.
The lock relevant characteristic is Column A and the same has been added to the Lock Characteristic tab(RSPLSE) of the infoprovider. The input ready query is also restricted with a variable on Column A (manual input single variable- mandatory).
While the user opens the Planning Layout and plans the data, we can see lock entry in RSPLSE(locks tab) for the Column A selection in the infoprovider, yet if another user is trying to plan for data for some other selection of Column A, a lock entry in RSPLSE is shown with the selection but it errors in thelayout with lock on the infoprovider and cannot plan the data.
Any inputs will be of great help.
Regards,
Priyanka

Post is closed.
Refer http://scn.sap.com/thread/3564212 for the solution.
Regards,
Priyanka

Locking Issue in Planning DSO- SAP BW 7.3 Integarted Planning

Hi Experts,
We have built Aggregation Level on Direct Update (planning enabled) DSO and used the same in the input ready queries.( Its complete Manual planning - new row addition feature in WAD).
We have 5 characteristic and one key figure for planning.
We are facing lock issue while planning the data i.e. when one user is planning, other user cannot plan.
The lock relevant characteristic is Column A and the same has been added to the Lock Characteristic tab(RSPLSE) of the infoprovider. The input ready query is also restricted with a variable on Column A (manual input single variable- mandatory).
While the user opens the Planning Layout and plans the data, we can see lock entry in RSPLSE(locks tab) for the Column A selection in the infoprovider, yet if another user is trying to plan for data for some other selection of Column A, a lock entry in RSPLSE is shown with the selection but it errors in thelayout with lock on the infoprovider and cannot plan the data.
Any inputs will be of great help.
Regards,
Priyanka

Found the answer.
We had used the Planning Function directly in the WAD layout before saving data without filter.(basically to check some condition).
Created the Planning Sequence with Column A filter on the Aggregation level and used the same sequence before saving the data in WAD
Issue resolved.
Consider this post as closed.
Regards,
Priyanka

[ADF-11.1.2] Locking issue with SQL 92

I see one Locking issue with SQL92 Oracle ADF Application.
ADF Version: [ADF-11.1.2]
Database: Oracle 10g Express Edition
Situation 1:
With Following setting:
File: Application Resource > Description > ADF META-INF > adf-config.xml
 <startup>
 <amconfig-overrides>
 <config:Database jbo.SQLBuilder="SQL92" jbo.locking.mode="optimistic"/>
 </amconfig-overrides>
 </startup>I have a page showing record 'x' of view object. I open same record on another page. Now I have same record showing on two different tabs of browser.
1. I modify first record and save it. It worked... Got commited to database.
2. I goto second tab and modify same record and tried to same it. It throws me an error - Another user has changed the row with primary key oracle.jbo.Key[38 ] . As expected...
3. I then, reopen the same record on 3rd tab of browser. Modify it and tried to save it. It just hang... as if it is processing the record endlessly.
If I see the Log:
<BaseSQLBuilderImpl> <doEntitySelectForAltKey> [312] BaseSQLBuilderImpl Executing doEntitySelect ... (true)
<BaseSQLBuilderImpl> <doEntitySelectForAltKey> [313] Generating new LOCK statement
<BaseSQLBuilderImpl> <buildSelectString> [314] Built select: 'SELECT ID, CI_ID, COLUMN_NAME, DISPLAY_COLUMN_NAME, COLUMN_VALUE, CREATE_DATE, CREATE_BY FROM ESUSER.CI_AUDIT'
<BaseSQLBuilderImpl> <doEntitySelectForAltKey> [315] Executing LOCK "SELECT ID, CI_ID, COLUMN_NAME, DISPLAY_COLUMN_NAME, COLUMN_VALUE, CREATE_DATE, CREATE_BY FROM ESUSER.CI_AUDIT WHERE ID=? FOR UPDATE"
<BaseSQLBuilderImpl> <bindWhereAttrValue> [316] Where binding param 1: 38
That's it.. nothing happens further.. If I execute above query on SQL Worksheet, it doesn't come up with the result. Just hang for something...
SELECT ID, CI_ID, COLUMN_NAME, DISPLAY_COLUMN_NAME, COLUMN_VALUE, CREATE_DATE, CREATE_BY FROM ESUSER.CI_AUDIT WHERE ID='38' FOR UPDATE I can execute above query for other record of same table but not '38'. Even if I fire commit command to database, it is not working.
I have to restart the database services to bring everything to normal state.
Situation 2:
With Oracle as Database :
 <startup>
 <amconfig-overrides>
 <config:Database jbo.SQLBuilder="Oracle" jbo.locking.mode="optimistic"/>
 </amconfig-overrides>
 </startup>Everything is working file. i.e. at step 3, record is getting modified successfully with following log:
<OracleSQLBuilderImpl> <doEntitySelectForAltKey> [27] OracleSQLBuilder Executing doEntitySelect on: ESUSER.CI_AUDIT (true)
<ADFLogger> <begin> Entity read all attributes
<OracleSQLBuilderImpl> <buildSelectString> [28] Built select: 'SELECT ID, CI_ID, COLUMN_NAME, DISPLAY_COLUMN_NAME, COLUMN_VALUE, CREATE_DATE, CREATE_BY FROM ESUSER.CI_AUDIT CIAudit'
<OracleSQLBuilderImpl> <doEntitySelectForAltKey> [29] Executing LOCK...SELECT ID, CI_ID, COLUMN_NAME, DISPLAY_COLUMN_NAME, COLUMN_VALUE, CREATE_DATE, CREATE_BY FROM ESUSER.CI_AUDIT CIAudit WHERE ID=? FOR UPDATE NOWAIT
<ADFLogger> <addContextData> Entity read all attributes
<OracleSQLBuilderImpl> <bindWhereAttrValue> [30] Where binding param 1: 38
<ADFLogger> <addContextData> Entity read all attributes
<ADFLogger> <end> Entity read all attributes
<ADFLogger> <end> Lock Entity
<ADFLogger> <begin> Before posting the entity's changes
<ADFLogger> <begin> Updating audit columns
<ADFLogger> <end> Updating audit columns
<ADFLogger> <end> Before posting the entity's changes
<OracleSQLBuilderImpl> <doEntityDML> [31] OracleSQLBuilder Executing, Lock 2 DML on: ESUSER.CI_AUDIT (Update)
<OracleSQLBuilderImpl> <buildUpdateStatement> [32] UPDATE buf CIAudit>#u SQLStmtBufLen: 210, actual=60
<OracleSQLBuilderImpl> <doEntityDML> [33] UPDATE ESUSER.CI_AUDIT CIAudit SET COLUMN_VALUE=? WHERE ID=?
<ADFLogger> <begin> Entity DML
<OracleSQLBuilderImpl> <bindUpdateStatement> [34] Update binding param 1: cip7ri1
<OracleSQLBuilderImpl> <bindWhereAttrValue> [35] Where binding param 2: 38
<ADFLogger> <addContextData> Entity DML
<ADFLogger> <end> Entity DML
Can any one please tell me, what is the issue with SQL92 setting ?
Edited by: Anandsagar Sah on Mar 11, 2012 8:10 AM

The framework works correctly in the Situation #1. Please, note that the locking statement in this case is "SELECT ... FOR UPDATE", but not "SELECT ... FOR UPDATE NOWAIT" (as it is in the Situation #2). When you entered the 2nd tab and tried to update the row, then the framework executed the locking statement and the row was locked (and it remained locked because the framework detected that another user had modified the row, so it stopped the processing and no COMMIT operation was executed). When you entered the 3rd tab and tried to update the row, then the framework tried to lock the row againg, but the locking statement was blocked by the existign lock and it started waiting on the lock from the 2nd tab. So this is expected behaviour.
The interesting question is why you do not get any error in the Situation #2. In my opinion you should get an error because the locking statement from the 3rd tab should fail immediately (because the row should have been locked from the 2nd tab and the locking statement is with NOWAIT option). I suspect that when the DB is Oracle and you use Oracle SQLBuilder, then the ADF issues a DB savepoint at the beginning of the DML operation and rolls back to the savepoint is a case of some failure, so the 2nd tab has not left any lock. You can check this by setting on SQL trace on the DB server.
Dimitar

BPS keyboard lock issues

Similar Messages

Maybe you are looking for