Branch Office will not host Microsoft services/servers - Sites and Subnets

Hi,
The scenario is the following:
1 Domain. Windows 2012 R2.
6 sites. 1 DC per site. 3 subnets per site.
5 sitelinks.
The sites diagram is the following:
The branch office "SITE04" will not host any Microsoft service/server/PC. Network routing/flow scheme will not change (branch office SITE04 reamins routing traffic to/from SITE05 and SITE06).
The questions are:
Does the existing SITE04 subnets must be deleted?
Does the existing SITE04 site must be deleted?
Does the existing SITE04-SITE05 and SITE04-SITE06 site links must be deleted?
if yes to any of the above questions?
How to redesign the subnets/sites/site links?
Thanks in advance!

Thanks MrX for your response.
The SITE04 branch office will not host Microsoft-based PCs/Servers/Services. SITE04 will be used for network traffic routing purposes and will host servers from another platform.
Why to mantain SITE04 subnets?
Thanks in advance!
In this case, maintaining the subnets would be optional.
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

Similar Messages

  • Safari Will Not Download pdfs: On One Site and from One Computer Only

    On only one computer, at only one web site (my own creation), I suddenly cannot get pdfs to open in Safari 4.0. What might be happening?
    1. I have created 5 web sites for my business. I use RapidWeaver from RealMacSoftware.
    2. Each of the 5 sites I’ve created has downloadable pdfs.
    3. Two of the sites are password protected, but this does not appear to be the source of the problem.
    4. One of these two protected sites (Site A) will not open any pdfs on the site in a Safari browser window on my Intel iMac running 10.5.7. When I click on a pdf link in Safari, I get the gray spinning wheel on a white page (which does not stop after 10+ minutes). If I try to reload the page, a white page results. Trying any other pdf link on this site produces nothing but a white page.
    5. If I option-click on the link, the pdf downloads fine, but I then have to open it. It does not open in Safari, but rather Reader.
    6. This behavior does not occur on two other Macs in my office. One, a MacBook Pro running 10.5.7 and Safari 4.0, opens the pdfs in Safari just fine. Another, a G5 running Tiger with Safari 4.0, also works fine. (FWIW: No problems on Dell running XP Home, via either Explorer or Firefox.)
    7. The behavior also does not occur on the other protected site I have created (Site B) or on any of the other unprotected sites. All computers, all browsers—no problems.
    8. I have the latest Adobe Reader version (9.1.2).
    9. I have repaired permissions and restarted—no luck.
    10. I have republished Site A through RapidWeaver, but there is no change. My web host had a power failure a day or two ago, but all sites were up and running yesterday.
    Any clues about what’s going on? I have intentionally not downloaded the apparently available Safari version 4.0.1 because of the several problems reported on the boards.
    Message was edited by: Richard Setterberg

    I tried logging in to the guest account and got a slightly different result: Two of the five websites I've created with RapidWeaver now do not display pdfs using the Adobe Reader plugin.
    The common thread now is that the two that don't work are the password protected sites. When I boot back into my main account, the original problem returns: Only one site doesn't work; the other one does.
    Still only on one computer.

  • Firefox will not connect to another web site and it will not reopen after I close it.

    I have removed Firefox and reinstalled it. I have tried to disable addons but it still will not open unless I reboot my computer. If this problem cannot be fixed easly, I will have to remove Firefox for good. When it is open, it will not connect to any URL I enter. When I close it it will not reopen and I get a message that says I have to restart Windows. This bug needs to be fixed. It worked one day and the next day it would not work.

    A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
    See:
    * https://support.mozilla.com/kb/Server+not+found
    * https://support.mozilla.com/kb/Firewalls
    See "Hang at exit":
    *http://kb.mozillazine.org/Firefox_hangs
    *https://support.mozilla.com/kb/Firefox+hangs

  • Safari will not allow connection to your site and this is the only search engine on my Ipad

    Could you please advise how I can download your Firefox search engine. I am not able to use anything other than Safari which is the pre-installed Apple search engine on my IPad.

    Please read the follow thread, Apple does not allow Firefox to be installed in iPad.
    http://support.mozilla.com/en-US/questions/500084

  • Does SBS not host sufficient services to provide 'Enhanced presence Privacy' to users homed on that server?

    Hello All,
    I have a question around Enhanced Presence Privacy mode. I understand from the Technet documentation that EPP can only be enabled Globally, at the Site Level or at the User Server Service level. Due to the fact that managing client-side
    EPP settings is not exposed in the Lync Control Panel or Shell the recommendation for enabling EPP for a subset of users is to have a separate pool for those users. 
    I’m working with a customer who needs to deploy EPP for a subset of their users but considering that we’re already planning to deploy a centralised enterprise pool of 4 front end servers they are reticent to deploy another enterprise pool
    to offer their EPP enabled users resiliency. Given that pool pairing only works with enterprise edition to enterprise edition or standard edition to standard edition I came up with the idea of deploying a Survivable Branch Server for the EPP enabled users
    assuming that this new site would provide a target for EPP policies for those users. However, in testing this idea in the lab I’ve found that although I can create a site level policy for the SBS site the users homed on the SBS do not pick up the policy -
    EPP does not work and in the Lync client Status settings the same options are offered that would be offered if EPP was not enabled.
    Questions:
    Is this expected behaviour? I.e. Does an SBS not host sufficient services to provide EPP to users homed on that server, even though it’s technically another site?
    What is meant by the documentation when it talks about assigning the policy to the “User Server Service”? I assume there is only 1 of these services per pool?
    Thank you in advance.

    Hi,
    I didn’t find any documents about the SBS limitation to provide EPP mode.
    Please try to set a user policy to test if EPP mode works for the branch site users.
    Best Regards,
    Eason Huang
    Eason Huang
    TechNet Community Support

  • Elements 8 will not initialize online services

    I have just upgraded and installed Elements 8 I am running Windows 7. When I start the organizer it will not initialize online services preventing me from using Photomail. I have attempted using Adobe Email Client and also sending as an attachment, neither has been successful.
    Please help.
    Thank you!
    [email protected]

    Can you describe more about what you mean by it not initializing online services?
    Are you getting any kind of error message?

  • I installed Lion and now my MS office will not work, is there a way to revert back my original software?

    I installed Lion and now my MS office will not work, is there a way to revert back my original software?

    Back to Snow Leopard from Lion install method
    Read and print out these instructions, your computer is going to be offline and you wil be cutoff from help until your machine is restored.
    Clear the Desktop, Downloads and Trash of anything you wish to keep by placing their files in the respective Documents, Music, Pictures, Movie folders.
    If you have a TimeMachine drive, update it and disconnect for the duration of this restore time. It will be your second backup system and will have to be wiped and setup again after successfully going back to Snow Leopard if it was connected to the OS X 10.7 boot drive. If it wasn't, then leave it disconnected without updating to Lion.
    Backup ALL your Users folders (Documents, Pictures, Movies, Music etc) manually (drag and drop methods) to a (not TimeMachine) external powered drive (HFS+ journaled formatted in Disk Utility) and disconnect, your going to be wiping the entire disk of ALL DATA. (warning, everything will be gone and not recovered)
    Here we go!
    Hold c and boot off the 10.6 installer disk that comes with your computer and second screen in just STOP.
    Look at the Utilities Menu for Disk Utility.
    On the left is the name of your hard drive maker, click it and Erase (format HFS+ Journaled), give it the same name as before, and click Erase...
    This should wipe the drive of ALL partitions (GUID, OS X and 10.7 Recovery, Windows if present)
    When it's done, quit and install OS X 10.6. Then install all your programs from fresh sources and validate/update.
    When you setup a first account, use the same user name as before, this way you can simply drag and drop the content of your previous Users folders from the external drive right back into the new Users folders and everything should work peachy. Links in iTunes to music, playlists and iPhoto links especially.
    Update OS X to 10.6.8 using the Combo Update for best results.
    http://support.apple.com/kb/DL1399
    (Note: If your original machine had 10.5 and you want the free iLife that comes with the disks with the computer, then you'll have to install 10.5 first using the same c boot/erase/format methods as above, then update to 10.6 via the disk, then Combo Update 10.6.8)
    Final step optional but highly receommended.
    A lot of people use a Carbon Copy Clone of their boot drive to a HFS+Journaled external drive as a "hold the option key" bootable backup in case something goes wrong with their boot drive or need to restore to a previous OS X version..  (in addition to TimeMachine drive for more immediate backups.)
    It's not advised to have a Bootable Clone and a TimeMachine partition on the same external drive, as two drives gives hardware protection in case one fails.

  • HP 6700 printer will not enable web services.

    My HP 6700 printer will not enable web services. I've already downloaded the firmware update, manually entered the IP and DNS numbers... shutdown the printer and turned it back on.But when i try to enable web services it try's for a while then says web services could not be enabled.. any help would be appreciated.  I have vista. 
    This question was solved.
    View Solution.

    Hi there, two other things you could try (if not already attempted) are:
    Check to ensure that you have the latest firmware for your router – review your router documentation/help (or the router manufacturer’s web site) for information on how to check for and install firmware updates. 
    Restore factory defaults - The factory default option is usually found in the Setup>Tools menu on your printer.   Do the following on your device:
    Remove/Disable Web Services 
    Restore factory defaults/settings (depending on the printer this is found under the Setup>Tools menu, or the Setup>Web Services menus, but varies by printer) 
    If prompted, re-do initial setup of your device and add it to your network
    Re-enable Web Services 
    Once the Web Services information sheet is printed, use the printer claiming code to add your printer to your account on ePrintCenter
    If my reply helped you, feel free to click on the Kudos button (hover over the "thumbs up").
    If my reply solved your problem please click on the Accepted Solution button so other Forum users may benefit from viewing the post.
    I am an HP employee.

  • I have no cell service at my house, but when i leave it my iphone 5 will not pick up service unless i turn it off and back on????

    I have no cell service at my house, but when i leave it my iphone 5 will not pick up service unless i turn it off and back on????

    Reset all network settings, go into settings, general, reset network settings.

  • My location services appears to be locked. They are in light grey and will not let me turn them on and off. New app requiring GPS i can't use due to this. How can i reset or fix?

    My location services appears to be locked. They are in light grey and will not let me turn them on and off. New app requiring GPS i can't use due to this. How can i reset or fix?

    Double check your restrictions for location service.
    settings - genral - restricitons.

  • MBP will not register with iCloud servers (and most iCloud features + Handoff and Continuity do not work)

    Hi all,
    I have an extremely strange issue on my rMBP which has not been solved yet despite over 2 hours on the phone with Apple support, and another hour after being put through to a Senior Advisor, and several online chats.
    I have a Apple Certified Refurbished Late 2013 Retina Macbook Pro, which has a 2.3Ghz i7, 16GB of RAM, 500 Flash Storage and the NVIDIA discrete graphics. It was purchased in December 2014 on the Apple Store. It is running 10.10.2.
    For some reason, my computer WILL NOT register with iCloud. Messages and Facetime both would not work, my iPhone 4S which is capable of text message forwarding would not recognise it and allow me to turn it on. Handoff, Continuity and Instant Hotspot - basically any of the features to do with iCloud or connecting to another device - do not work.
    Originally I believed it was just an issue with Messages and Facetime so I reinstalled the OS back to 10.10.1, but that did not solve the problem. All my Messages contacts kept on coming back as 'not registered with iMessage' and I could not turn on SMS Relay either.
    I contacted Apple on Wednesday night and ended up talking to several different people, the Senior Advisor was the most helpful - really tried to help me figure out what was wrong, and to fix it - wonderful help, really was. They used screen sharing and were quite confused. They figured out as well that Handoff, Instant Hotspot, and all those other features don't work either. At this point, they made me update to 10.10.2 to see if it was an issue with the update, but to no avail.
    Eventually, the SA checked my iCloud account and saw that the computer hadn't even connected to iCloud, and wasn't even showing up as one of my devices, despite the fact that I had signed into iCloud on this computer.
    The SA told me that he suspected it must have been something to do with hardware, but didn't know what it could be. He said the only time he had seen this before was on a refurbished laptop when the serial number hadn't been put back on, but my serial number was there, so he said it must have been something to do with Bluetooth or Wifi.
    Wireless seems to work completely fine, but there is a strange thing with Bluetooth in which within System report says that the computer is not discoverable or connectable, despite the fact that in the Menu Bar it says it is on and discoverable. It becomes discoverable and connectable once you toggle the switch in System Preferences.
    I was planning to book a Genius Bar Appointment as suggested by the SA, but something strange happened today - all of a sudden, some (not all of them) of my iMessages from earlier today came through. Still no working Handoff or Facetime or Continuity, but now I am starting to wonder what is really wrong.
    Despite the fact they said it was hardware (especially Bluetooth), what could explain why it (seldom) or will not register with iCloud? Can anybody shed some light on the situation and whether a Genius Bar appointment could help fix it?
    Cheers and thanks in advance.

    Needed to add some clarification here:
    iCloud shows me as signed in, but Calendars are NOT checked
    Internet Accounts shows Calendars as syncing

  • Branch office WDS still pullinh image from main site

    Hi,
    I'm trying to configure a WDS on our branch site.
    what i did was open a new folder named DeployFilesFromMaster on the branch office server and replicate the DeploymentShare from main to branch office using DFS.
    then i installed WDS services on the branch office and add a Boot Image (taken from DeployFilesFromMaster)
    next i configured, under Scope Option on the DHCP server, options 66 (giving the ip address of the branch WDS), and option 67 (giving the path \Boot\x64\wdsnbp.com).
    now when I'm booting a computer into PXE it start working, but when pressing F8 and use the netstat command i see it has a session to my main office deploy server instead to the branch office.
    what do i need to change?
    when looking in the branch office server, there is ofcourse the DeployFilesFromMaster folder and there is another folder named DeploymentShare that was made while installiing the WDS server, and there is a wdsnbp.com file as well. how do I know, when DHCP
    direct me to the boot file name, that it direct me to the right file, or it doesnt matter.
    thanks for your help

    The variable WDSSERVER is a variable that is figured out by MDT when booting a machine using the boot image created by Microsoft Deployment Toolkit. Therefore it is not available in Windows.
    If you want different WSUS servers depending on location of the client you can use for instance this technique in CustomSettings.ini. This will point clients on a specific subnet to a specific WSUS server.
    [Settings]
    Priority=DefaultGateway,Default
    [DefaultGateway]
    10.0.0.1=HQ
    10.0.1.1=BranchOffice
    [HQ]
    WSUSServer=http://wsus-hq:8530
     [BranchOffice]
    WSUSServer=http://wsus-branch:8530
    Blogging about Windows for IT pros at
    www.theexperienceblog.com

  • I just created a new profile/user on my MacBook Pro. My pointer/mouse. It works fine in my older user profile, but when I go to the new profile my mac will not respond to clicks. Mouse moves but will not click. Already tried restarting and the pram zap.

    I just created a new profile/user on my MacBook Pro. My pointer/mouse on my trackpad. It works fine in my older user profile, but when I go to the new profile my mac will not respond to clicks. The Mouse moves but will not click. Already tried restarting and the pram zap. The problem starts when I log out of my main profile. I get to the login screen and my laptop stops responding to clicks. When I manage to make my way back to my main profile the mouse works perfectly.  Should I just delete the new profile and try again?

    If the modem is also a router, either use the modem in bridge and run pppoe client on the TC.. that is assuming ADSL or similar eg vdsl. If it is cable service.. and the modem is a router, then bridge the TC.. go to internet page and select connect by ethernet and below that set connection sharing to bridge.
    Please tell us more about the modem if the above gives you issues.

  • I updated Pages two months ago, yet my gmail program will NOT send out a pages document and a pages file I saved to desktop will NOT open and a box pops up telling me it won't open document without the Pages upgrade WHICH I HAVE ALREADY DONE...PLEASE HELP

    I updated Pages two months ago to the latest version.  BUT, my MAIL program will not allow me to send documents I attach that are genereated witht eh update Pages.  And, when I save a doc to desktop generated in Pages, it will not opena, a box pops up and tells me the it wil not open until I have upgraded to the new PAges, WHICH I HAVE ALREADY DONE!!!  What is UP with this, can anyone please help me?  Would GREATLY appreciate it.
    SA

    Pages 5 is in a new format that is not compatible with GMail, Google, Amazon, DropBox and other 3rd party servers.
    Peter

  • The .prel files will not load into premiere elements 13 and says that there is a missing codec. This is a school's site llicense that we've used for more thatn a month.

    The .prel files will not load into premiere elements 13 and says that there is a missing codec. This is a school's site llicense that we've used in our lab for more than a month.

    GPPNeil
    Premiere Elements 13 on Windows 8.1 (assumed 64 bit).
    First..
    1. Have you updated from 13 to the 13.1 Update using an opened project's Help Menu/Update. If not, please do so.
    2. Do the problems exist if you disable the antivirus and firewall(s)?
    3. Are you running the program as Administrator? Do you have the latest version of QuickTime installed on your computer?
    4. Have you refreshed the Online Services using Premiere Elements Editor Edit Menu/Preferences/Web Sharing?
    5. Have you updated the Adobe Application Manager?
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=4773
    6.Is your video card/graphics card driver version up to date according to the web site of the manufacturer of the card?
    7. Lots more we could go through such as deleting the Adobe Premiere Elements Prefs file and, if necessary, the whole
    13.0 Folder in which it exists.
    But, I think that you have enough things going on here to warrant an uninstall, free ccleaner run through (regular cleaner and registry cleaner parts) and then reinstall with the antivirus and firewall(s) disabled.
    CCleaner - PC Optimization and Cleaning - Free Download
    If the problems persist after all that then we will adjust to additional troubleshooting maneuvers.
    Any questions or need clarification, please do not hesitate to ask.
    Thank you.
    ATR

Maybe you are looking for