Brand New GT70 2PE Overheating like hell!!!

Hi
I bought brand new gt70 just a week ago with 880m 8gb to my surprise it has serious overheating the gpu temperature sky rockets to 93c and it throttles to half of its original clock speed during loading screen of every game before even the game starts!!!!. I also tested it with k lite codec pack with gpu acceleration with just 2% utilization the temperature reached 90c. (using turbo fan at all times)
I did a clean win 8.1 install with all latest drivers from msi also updated the bios , ec firmware and vbios still the same thing.
Some idea what is going on here?
Thanx waiting for response (:

Dude seriously return the GT70 2PE and buy a GT70 with a 970m. It will spank that 880m by a good bit and run a whole hella lot cooler. Plus you gain a few new Maxwell features.

Similar Messages

Most of my built in apps are erased on my brand new ipod touch 4g, like face time and apps store . How do i get them back, like face

i need my built in apps back . Does any one know about this ?

The built in Apps can not be deleted. Check other screens. Check existing folders. Check Settings - General - Restrictions.
Stedman

Add your name if your brand new ipod didnt' connect like it should!

Since Christmas we have had a total of 6 ipods that all died after we plugged them into the USB port. We have replaced them 3 times.
I want to know since around christmas time how many of us have had to get replacements?
Please add the date you bought them , the color, and if you got them replaced.
I will start
Christmas 2005 - 2 30GB white ipods - replaced 3 times for a total of 6
Also, for someone that has a WORKING ipod that has never had a problem, is the ipod suppose to get hot when you plug the ipod into the usb port. and when i mean hot i mean hot enough you can only touch it for a second or two. the hottest part is right below the connector. is this normal?
Please add to my list. please

If you use a rules-based firewall, do you have a rule permitting Firefox to talk to its security component via TCP through the localhost address? You need to have that to use secure pages with Mozilla browsers.
McAfee can cause problems with Mozilla browsers. It has a history of doing that.
* http://kb.mozillazine.org/Firewalls
* https://support.mozilla.org/kb/Firewalls

GT70 2PE shift keyboard stuck

I have a problem with my brand new GT70 2PE. The left-Shift key gets stuck in pressed down position almost all the time, I have to grab it with my nail to release it. All the other keys are fine. Is there something I can do myself or do I have to give it back to the reseller for repair?

Most likely you will either have to give it back to the reseller or contact MSI directly. I can't say I have had any problems with my GT70 0NE's keyboard, but then again I hardly use it.
Needless to say, even when I game using it I haven't had issues. Of course my 0NE is quite old at this point, but I doubt the keyboard design has changed much.
Contact them and see what they say.

Just installed Logic Pro 8 on my BRAND NEW iMac 24"

So I had a 15 MBP (2.4 Ghz) and I just bought a 24" iMac (2.9 Ghz version) I spent all day installing all my software (Adobe Master Collection, Logic Pro, iTunes music) The first time I turned on the machine it started up, but then I tried to navigate somewhere and the computer froze right up..... I held the power button and restarted....
I mainly got this machine to use the Adobe software and Logic Pro..... Now when I went to open up a demo project in Logic, it's giving me an error code "Disk is too slow or System Overload.(-10010)"............... ?????? And the CD drive seems to be making a pretty noticeable loud noise and "clunky" sound.
I thought I was going to get better performance out of this machine than my MBP, but it seems to be worse!!! Can anyone fill me on as to WHY my BRAND NEW machine is acting like this?

Dj Cj wrote:
So I had a 15 MBP (2.4 Ghz) and I just bought a 24" iMac (2.9 Ghz version) I spent all day installing all my software (Adobe Master Collection, Logic Pro, iTunes music) The first time I turned on the machine it started up, but then I tried to navigate somewhere and the computer froze right up..... I held the power button and restarted....
I mainly got this machine to use the Adobe software and Logic Pro..... Now when I went to open up a demo project in Logic, it's giving me an error code "Disk is too slow or System Overload.(-10010)"............... ?????? And the CD drive seems to be making a pretty noticeable loud noise and "clunky" sound.
I thought I was going to get better performance out of this machine than my MBP, but it seems to be worse!!! Can anyone fill me on as to WHY my BRAND NEW machine is acting like this?
Sounds to me like you got a clunker. Take it back to the Apple store, and get it replaced ASAP.
This has nothing to do with Logic... your drive might be all messed up...
Cheers

HDMI Output looks like HS - GT70 2PE

Dear all,
Friday I brought a brand new MSI GT70 2PE Dominator Pro, wich is equiped with a GTX880M and an Intel HD 4600.
Yesterday I tried to connect my laptop to an 24" screen, also brand new. But it did not work. I have tried the screen with another laptop, also via HDMI, everything works fine.
Here is what I have tried :
- Update both VGA drivers
- Update BIOS (With reset EC)
- Update VBIOS
- Factory reset
- Install a non-MSI Windows 8.1 (wich causes me troubles to get my MSI recovery image back aftewards... If someone have the same probleme, PM me )
- 3 HDMI cables and 2 screens (my new screen and my TV, all set to the correct input)
- Downgrade the drivers to an older version than factory image
Nothing works. When I plug the HDMI cable, the power button shows in red for maybe 1 or 2 seconds, and is white again afterwards.
I am thinking about an HW issue, but if anyone have another idea, you are welcome

not sure, depend what's the reason for the not loose connection, assume if that's the issue
try make the HDMI cable to make to do not loose connection,
when insert the HDMI jack, try move it up/down/left/right gently see if connection can be establish
i have such issue when connection HDMI to LG TV, it 3 different cables, all has loose connection,
and they works only in some particular, pushed down. if moved/toched by any direction they start loosing the signal again. i guess its some kind of incompatible between cables and ports which cause to doesn't fits well for good connection

Brand new ipod touch not working like it should??

I have a brand new ipod touch that i got last tuesday.and every downloaded app will stop working after i have had it for about a day..like it starts to load the app then just goes back to homescreen..all pre-installed apps work fine.
but i have tryed restoring my ipod and it doesnt really fix it because all the apps stop working just like before..and i have also tryed deleting and re-installing the apps but is still doing the same thing.
Is there a way to fix this or should i get it replaced??
(i have a 2 year warrenty)

Maybe your using too much Virtual Memory. Try holding the sleep/wake button and the home button until you see the silver apple.

TS1702 My iPhone 4s didn't do it until the latest update so imnpretty sure it's on the apple server some sort of bug maybe? Not sure. But whatever it is I really would like to download apps. It won't let me download any apps and my phone is brand new

My iPhone 4s didn't do it until the latest update so imnpretty sure it's on the apple server some sort of bug maybe? Not sure. But whatever it is I really would like to download apps. It won't let me download any apps and my phone is brand new.

Sorry guysy iPhone says unable to download application at this time and I try all day and it still won't let me download no matter how hard I try.

I need help. My three boys have brand new iPad mini's and I would like to set them up. I would like to create one new apple ID and have it shared by all three. This way they can share content (apps, music). How do I do that?

Looking for an information management solution. I have three boys that have brand new ipad mini's. I would like to set them up to manage information the easiest way.
My first thought was to use my apple ID for their apps and purchases. This would give me the advantage of seeing everything downloaded and be able to monitor this closely. The disadvantage to me, was that they would see all of my contracts, my apps, and my music.
My other thought was to create one new apple ID and to share that among the three boys. This way I would not have to worry about my information being on their ipads.
This is a very confusing situation for me. My goal is seperate my stuff from my kids stuff. Appreicate input from anyone who has in-depth experience with this as it applies to apple ID, icloud ID, and any detailed explaination of how to do this would be appreiciated. Thanks.

I think I will do this. I will use my apple ID and set face time and message to work independently. That solves one problrem. My other problem and maybe my bigger problem is that if I am using my apple ID, how do I iflter all of this so that my kids don't see my contacts, get my apps, etc. ?

How can I make my Mac like "brand new"?

Hello.
I apologise for this being somewhat rambling but it's hard to explain exactly what I want to do.
I have decided to give my iMac G5 to my sister-in-law. (I have already replaced it with an Intel iMac and MacBook and three computers in one house is over the top!) I would really like for her to have the "out of the box" experience as if the Mac was new.
It originally came with Panther and iLife 4. I have since upgraded to Tiger and iLife '05 and I would like to have these installed for my sister-in-law rather than the original software. However, she needs Appleworks which I only have on the Panther disks. I know I have to do an erase and install of Tiger (I'm not quite sure how to do that though) and install iLife '05. I assume I can just install Appleworks from the Panther disks. Can I do all of this and not have to enter personal details, such as a name for the home folder? It would be nice for my sister-in-law to plug in the Mac and then get to do that herself, as if it was brand new.
My sister-in-law isn't terribly familiar with computers in general. She's never even seen a Mac. I realise I could just do the Tiger install and leave her to do the iLife and Appleworks. But being so new to it all, it would be easier if I could do it for her.
Any advice, as always, would be appreciated.
Rachel

If you have ever had any personal files on the iMac which you would rather not share with anyone, you should use Disk Utility to erase the hard drive using the option to write zeroes. Overwriting the files is the only way to ensure that they can't be recovered at a later date.
After that is complete, use the restore discs that came with your iMac to reinstall all of the original software (including AppleWorks). Then use the Tiger install disc to upgrade it to Tiger.

I bought a brand new Mac 27" desktop that came loaded with Adobe CS6. Everything worked like a charm until the hard drive, 1Tb, developed a bad sector and the Apple Store reinstalled a new one as I had extended warranty with them. The recycled the drive i

I bought a brand new Mac 27" desktop that came loaded with Adobe CS6. Everything worked like a charm until the hard drive, 1Tb, developed a bad sector and the Apple Store reinstalled a new one as I had extended warranty with them. They recycled the drive immediately (like a fool I didn't ask for it back to get the data off it.) But luckily I have all my data on CrashPlan. I downloaded it and it worked great except I downloaded it to the desktop and not the original location so it got squirrely. I also have an external 1.5Tb drive that I wanted to make bootable so I installed Mavericks 10.9.3 . I then went ahead and installed it on the newly installed drive too.
I think that because I have a new drive Adobe thinks I have a news computer. I bought the 27" Mac brand new from Ebay and it came loaded with software, including CS6. I have a serial number for CS6 but Adobe said it wasn't valid. (I have owned CS2, CS4 and now CS6 which came preloaded onto the Mac by the seller who told me that the software was registered to the Mac???
I am going to re-download the backup but this time to the original location (I still don't think it will work with Adobe. What can I do about this?
iMac 27-inch, Late 2012
Processor 3.2 GHz Intel Core i5
Memory 32 GB 1600 MHz DDR3
Graphics NVIDIA GeForce GTX 675MX 1024 MB
Software OS X 10.9.3 (13D65)@

You need to contact Adobe Support either by chat or via phone when you have serial number and activation issues.
Here is a link to a page with options to help make contact:
http://www.adobe.com/support/download-install/supportinfo/

HT201269 i would like to get my notes back or at least be able to see them, from itunes without restoring my brand new iphone 4s as i believe the back up from my previous iphone is corrupted. Help please

i would like to get my notes back from itunes or at least be able to see them without restoring my brand new iphone 4s as i believe the back up from my previous iphone is corrupted. Help please

If you can't restore from your backup you could try 3rd party software such as iPhone Backup Extractor to see if you could extract your notes from the backup.

My new ipod touch 4g that i just got is running extremely slow and the apps crash alot. I have about 10gb left out of 16 gb. When i got it, it was brand new, and ran like how it is now. I was just wondering if this could be some sort of defect?

My new ipod touch 4g that i just got is running extremely slow and the apps crash alot. I have about 10gb left out of 16 gb. When i got it, it was brand new, and ran like how it is now. I was just wondering if this could be some sort of defect?

My new ipod touch 4g that i just got is running extremely slow and the apps crash alot. I have about 10gb left out of 16 gb. When i got it, it was brand new, and ran like how it is now. I was just wondering if this could be some sort of defect?

Brand New 13" Macbook Pro Retina (Mid 2014) Overheating?

Last week I brought a new 13" Retina Macbook Pro. I am so excited and happy since I finally got my first Macbook after a long waiting and saving up money.
Everything was working so well so far, until recently I got bit concerned about the heat that this macbook generates. The first time I noticed this when I was watching a flash video. The back part of it was too hot, that I can't even keep it my lap. The next day I got the same issue. This time I installed Istat Menus to monitor the temperature, and it was 83 degree celsius.
I thought it was a flash player issue. Reinstalled, results same. Changed browser from Chrome to Firefox, same result. CPU usage was about 25 to 35% when running flash content and simple css3 loop animation.
Moved to Safari, temperature down to 47 degree celsius, CPU usage was 10 to 15% running same flash content and simple css3 loop animation.
So I guess It is the browser issue.
Now installed a brand new HP printer, Opened mac's default scanning window and scanned a document, there it was again, the temperature was 82 degree celsius, CPU usage was 25 to 30%
Now running vmware, same result, temperature 85 degree celsius, CPU usage 30 to 45%.
It is like whenever I use an app that takes more than 20 to 25 % of CPU, the temperature spikes to 80 degree celsius and above. I can't imagine what an app with 75 to 80% CPU usage would do to my Macbook.
I don't know if now a days , Macbooks are like this, Couple of people report here the same. All Mid 2014 Model.
https://discussions.apple.com/thread/6476065
https://discussions.apple.com/thread/6518207
https://discussions.apple.com/thread/6508083
My experience and knowledge is limited to PC usage, as far as I know a PC won't do this for a basic task like watching flash content, playing css3 loop animation.
Can somebody tell me what is going on?
Device: 13" Retina macbook Pro ( Mid 2014 ) [ Dual Core i5 2.6 GHz, 8GB RAM, 256 GB SSD ] OSX Mavericks 10.9.4
Tried What :
SMC Reset
Apple Diagnostics : No issues

The warranty entitles you to complimentary phone support for the first 90 days of ownership.
If you bought the product in the U.S. directly from Apple (not from a reseller), you have 14 days from the date of delivery in which to exchange or return it for a refund. In other countries, the return policy may be different. If you bought from a reseller, its return policy applies.

Hey i bought a brand new MBP like 6 months ago and now it won't charge

i bought a brand new MBP like 6 months ago and now it won't charge. I tried using a friends MBP charger of the same year as my computer but it still says not charging at the top right corner of the computer screen where the charging symbol is. This problem just happened out of nowhere because it was working the day before then the next day it just stopped working saying it is not charging. I tired doing all of the suggested techniques to fix it but not luck.
This is the battery report is when my MBP is either connected to my charger or my friends charger which works perfectly on her computer.
Battery Information:
Model Information:
Serial Number:          W013*****3BA
Manufacturer:          SMP
Device Name:          bq20z451
Pack Lot Code:          0
PCB Lot Code:          0
Firmware Version:          201
Hardware Revision:          000a
Cell Revision:          158
Charge Information:
Charge Remaining (mAh):          3137
Fully Charged:          No
Charging:          No
Full Charge Capacity (mAh):          5751
Health Information:
Cycle Count:          126
Condition:          Normal
Battery Installed:          Yes
Amperage (mA):          0
Voltage (mV):          11528
System Power Settings:
AC Power:
System Sleep Timer (Minutes):          10
Disk Sleep Timer (Minutes):          10
Display Sleep Timer (Minutes):          10
Wake on AC Change:          No
Wake on Clamshell Open:          Yes
Wake on LAN:          Yes
Current Power Source:          Yes
Display Sleep Uses Dim:          Yes
PrioritizeNetworkReachabilityOverSleep:          0
RestartAfterKernelPanic:          157680000
Standby Delay:          4200
Standby Enabled:          0
Battery Power:
System Sleep Timer (Minutes):          10
Disk Sleep Timer (Minutes):          10
Display Sleep Timer (Minutes):          2
Wake on AC Change:          No
Wake on Clamshell Open:          Yes
Display Sleep Uses Dim:          Yes
Reduce Brightness:          Yes
RestartAfterKernelPanic:          157680000
Standby Delay:          4200
Standby Enabled:          0
Hardware Configuration:
UPS Installed:          No
AC Charger Information:
Connected:          Yes
ID:          0x0000
Wattage (W):          0
Revision:          0x0000
Family:          0x0000
Serial Number:          0x00000000
Charging:          No
As you can see where it is labeled "AC Charger information" it states that its connected but there is no Wattage and says its not charging .
What is wrong with my mac? Is it serious and does Apple Care cover it?

Have you done a SMC
http://support.apple.com/kb/HT3964
Items include
Power
The computer doesn't respond to the power button when pressed.
A portable Mac doesn't appear to respond properly when you close or open the lid.
The computer sleeps or shuts down unexpectedly.
The battery does not appear to be charging properly.
The MagSafe power adaptor LED doesn't appear to indicate the correct activity.

Brand New GT70 2PE Overheating like hell!!!

Similar Messages

Maybe you are looking for