Brasero can't run: error while loading libcamel-1.2.so.13
When i try to run Brasero i receive this error on terminal:
brasero: error while loading shared libraries: libcamel-1.2.so.13: cannot open shared object file: No such file or directory
Yesterday - right after the Gnome 2.24 update - I had the same error while trying to start totem.
I know, this is very dirty, but
cd /usr/lib
ln -s libcamel-1.2.so.14.0.0 libcamel-1.2.so.13
did a fine job. I suppose, I missed one of the Gnome packages in my big update...
Cheers,
Sascha
Similar Messages
-
Can't run - error in loading shared libraries: libskgxp8.so
Everything seems to work when logged in as ORACLE
but when logged into Linux as any other user
I have checked and recheck permissions.
Maybe I still have something set wrong, but I doubt it.
I have not loaded patch. (fear of disaster)
Here is my situation
Same problem when root
-------------- see below ----------
[kurth@linux ~]$ sqlplus
SQL*Plus: Release 8.1.5.0.0 - Production on Thu Sep 2 09:02:58
1999
(c) Copyright 1999 Oracle Corporation. All rights reserved.
Enter user-name: kurth
Enter password:
oracleDSID: error in loading shared libraries: libskgxp8.so:
cannot open shared
object file: No such file or directory
ERROR:
ORA-12547: TNS:lost contact
Enter user-name: <Ctl-C>
[kurth@linux ~]$ env
TERM=vt220
HOME=/home/kurth
PATH=/usr/bin:/usr/local/bin:/bin:/usr/bin:/usr/X11R6/bin:/u01/ap
p/oracle/produc
t/8.1.5/bin:/usr/local/jre:/u01/app/oracle/product/8.1.5/bin
SHELL=/bin/csh
MAIL=/var/spool/mail/kurth
LOGNAME=kurth
HOSTTYPE=i486-linux
VENDOR=intel
OSTYPE=linux
MACHTYPE=i486
SHLVL=1
PWD=/home/kurth
USER=kurth
GROUP=kurth
HOST=linux.athome.com
REMOTEHOST=kurth450.athome.com
HOSTNAME=linux.athome.com
ORACLE_BASE=/u01/app/oracle
ORACLE_HOME=/u01/app/oracle/product/8.1.5
ORAHOME=/u01/app/oracle/product/8.1.5
CLASSPATH=/usr/local/jre,/u01/app/oracle/product/8.1.5/jlib,/u01/
app/oracle/prod
uct/8.1.5/product/jlib
LD_LIBRARY_PATH=/u01/app/oracle/product/8.1.5/lib
ORACLE_SID=DSID
ORACLE_OWNER=oracle
KDEDIR=/usr
nullDuh!!
I should have followed the instructionas and not skipped a step.
Following the instructions is tough but the key to success.
null -
Run error while loading FPGA host vi
Hi,
I want to use the NI-5640R board and have LV-FPGA installed together with LV 8.2...I have followed the post at :
http://forums.ni.com/ni/board/message?board.id=ifrio&message.id=55
and have taken in the newer drivers etc and the msg thread at :
http://forums.ni.com/ni/board/message?board.id=ifrio&message.id=131
and copied the files from the LV 8.0 area...
Now, when I open up an existing example project (Single Tone Output), open up the Host Block diagram, I see the run button broken with some errors on the Thernal Shutdown subVi...
A software component for your target was not found. Make sure all target files are installed from the target installation CD. Error details:
Error 1059 occurred at New VI Object in StockFPGA_IntfScriptSubVI.vi:4->StockFPGA_ScriptMethod_Reset.vi:1->nirviCallScriptMethPlugin.vi->nirviMethod.xnode:nirviMethod_GenerateCode.vi:1->nirviMethod.xnode:nirviMethod_GenerateCode.vi.ProxyCaller
Possible reason(s):
LabVIEW: Unexpected file type.
I understand that the installation might not be correct ? Any clues on what is missing...
-thanks
anshumanHi
Did you do the last step?:
2. Run ...\LabVIEW 8.2\Targets\NI\FPGA\bin\lvfpga_make_resource_cache.exe
On this page?:
http://forums.ni.com/ni/board/message?board.id=ifrio&message.id=131
Jerry -
Hi all
when i run yaourt to install any things :
package-query: error while loading shared libraries: libcurl.so.4: cannot open shared object file: No such file or directory
why?
what can i do?
I'm very newbie so help me with easy commands!
thankstry to reinstall yahourt :
https://wiki.archlinux.org/index.php/Yaourt -
DAC message while running execution plan - "Error while loading nodes"
I have just installed and setup Informatica 8.6.1, DAC, BI apps 7.9.6 for a Oracle Ebs R12.1.1 source instance
In informatica I have defined 2 relational sources "DataWarehouse" and "ORA_R1211" - the same names as in physical data sources of DAC
I have mentioned the flatfile parameter as "ORA_R1211_Flatfile" in DAC
after successfully build, when I run the ETL the error "Error while loading nodes" occurs.
the log file shows the following details:
START OF ETL
20 SEVERE Sat Apr 23 21:57:58 GST 2011
ANOMALY INFO::: Error while loading nodes.
EXCEPTION CLASS::: java.lang.NullPointerException
com.siebel.etl.engine.core.SessionHandler.getNodes(SessionHandler.java:2842)
com.siebel.etl.engine.core.SessionHandler.loadNodes(SessionHandler.java:473)
com.siebel.etl.engine.core.ETL.thisETLProcess(ETL.java:372)
com.siebel.etl.engine.core.ETL.run(ETL.java:658)
com.siebel.etl.engine.core.ETL.execute(ETL.java:910)
com.siebel.etl.etlmanager.EtlExecutionManager$1.executeEtlProcess(EtlExecutionManager.java:210)
com.siebel.etl.etlmanager.EtlExecutionManager$1.run(EtlExecutionManager.java:165)
java.lang.Thread.run(Thread.java:619)
21 SEVERE Sat Apr 23 21:57:58 GST 2011
* CLOSING THE CONNECTION POOL DataWarehouse
22 SEVERE Sat Apr 23 21:57:58 GST 2011
* CLOSING THE CONNECTION POOL ORA_R1211
23 SEVERE Sat Apr 23 21:57:58 GST 2011
END OF ETL
*****************Hi,
Mark the current EP as completed and re-assemble the subject area, generate parameters and build the EP and run the load.
Thanks,
Navin KumarBolla -
I had formatted external HDD as Mac OS Extended(journaled) earlier, but now i want to format the same as ExFAT so that i can copy files between PC and MAC. But it is giving 'Can't unmount' error while i try to run Erase
Use the PC to reformat the drive.
-
error while loading shared libraries: librt.so.1: cannot open shared object
I cant run my apache server v2.2.3.
Can someone help me?
thanks in advanceThat could be an accessibility issue. Check the user with whom you installed Apache server. Check the user has permissions to access the libraries.
-Mahendra. -
Error while loading application
Hi,
I'm not sure this is the right forum, but I try anyway.
I'm trying to use a 3rd party Java application Unico (just use it, I don't develop anything of that) that after working for weeks, suddenly refuses to load at startup, and returns an error like "Error while loading application" (no error code number no other hint about the problem).
The tests that did not work: 1. I installed the Unico again, 2. I created a new login and installed Unico in that login, 3. I started in safe mode (pressing shift at startup) - I always had the same message and loading aborted.
The only workaround I found is to use an external startup disk, that I fortunately had available to face cases like this: when starting the system up from that disk Unico WORKS, not only, but I can even use the same application in my internal disk that does not load otherwise.
My first conclusion is that something wrong happened to my system on the startup disk that prevents loading a Java application. The user Library seems to make no difference.
So my questions to the Java experts are:
- what in the system could suddenly block the loading of a Java application ? where should I look in the system (I can use the terminal and know something about UNIX) to fix this ? could this be caused by a permission problem ? (it looks a lot alike, but repairing permissions in Disk Utility didn't help) if so where are the Java support files stored in the Library and System Library to check and compare between the good and the bad system ?
- is there a better workaround to this problem, other than starting up from a different disk ?
Some additional info:
- the application Unico is freely provided by the Italian tax organization, so there is basically no support to use it...
- Unico requires Java 1.3.1: my system is constantly updated/upgraded and it runs the most recent release that is 1.4.0 (I guess...) and anyway worked very well till a week ago.
- since the last time the application had worked I installed two (non Apple) packages: the TomTom (GPS navigator) setup application, and new Epson printer drivers for my new printer.
- in all cases I repaired permissions and I also verified the disk with the disk utility
- Unico does not uses printers (it creates pdf files instead) and does not use USB, which in turn is used by both the Epson driver and the TomTom app.
So I cannot connect the Unico malfunctioning to this new SW except for the fact that I cannot find any other answer...
Thanks to anybody having any suggestion about
PieroI made some research: it seems to me that most (if not all) the Java machine is in the /System/Library/Framework/JavaVM.framework folder: but I found no evident difference in the file permissions between the good and the bad system (see my previous posts).
There are other locations where there are java related files: eg in Javaconfig.plist (in /System/Library/Java) that seems to name the locations for all components of the java machine. I checked some files in /usr/bin referenced in the .plist: again no difference.
Something "could" be a clue; just before the crashing point the Unico (java) program causes a message in the Console:
"[JavaAppLauncher Warning] Specifying a specific version for JVMVersion 1.3.1 is deprecated. Use the more general 1.3* instead."
This would be a clue... except that this message appears also when the program loads without problem (in the "good" system where it works). So it is more a warning.
Another clue is the message that appears in the console in the "good" system when the Unico loads correctly; and this seems really an error message (whateve it means):
"Index 1 for 'pxm#' 2062 out of range (must be between 0 and 0)
Attempted to read past end of 'pxm#'(2062) resource"
The funny thing is that when this message appears, Unico loads with no probem, while in the "bad" system it doesn't even get to this point.
So in my opinion both messages are irrilevant to identify the problem.
Or not ?
And again my main question is: what in the system could suddenly block the loading of a Java application ?
Thanks for any hint
Piero -
I got the following error
awk: error while loading shared libraries: libdl.so.2: cannot open shared object file: No such file or directory
dirname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/bin/ls: error while loading shared libraries: librt.so.1: cannot open shared object file: No such file or directory
basename: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
dirname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
basename: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
hostname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
grep: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/tmp/install.dir.4681/Linux/resource/jre/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
Tuxedo 9.1 base installation complete
when tried to install Tuxedo 9.1 on unbreakable Linux 5. I am trying to install Peoplesoft.
I found this error is pretty common, not necessary appear when installing Tuxedo. I am searching around and a lot of people saying to comment out the line
export LD_ASSUME_KERNEL
The problem is I don't know which in which file I need to do it. Has anyone have the encountered the similar problem before? Thanks.After reading the installation script, I figure out which is the evil file. I just post it here so if someone get into this problem in the future, he can fix it.
Here is the solution:
Assume you are at the directory where the install.sh is. Do the following:
-bash-3.1$ cd linux/sles9/base
-bash-3.1$ cp tuxedo91_32_SLES_9_x86.bin tuxedo91_32_SLES_9_x86.bin.bak
-bash-3.1$ cat tuxedo91_32_SLES_9_x86.bin.bak | sed "s/export LD_ASSUME_KERNEL/#xport LD_ASSUME_KERNEL/" >tuxedo91_32_SLES_9_x86.bin
-bash: tuxedo91_32_SLES_9_x86.bin: Permission denied
-bash-3.1$ cat tuxedo91_32_SLES_9_x86.bin.bak | sed "s/export LD_ASSUME_KERNEL/#xport LD_ASSUME_KERNEL/" >tuxedo91_32_SLES_9_x86.bin
Then run the installation script
sh install.sh and be happy as I am now!!!! -
Hi
I copied across an /opt folder from a Redhat 9 server that has Oracle 9.2.0 to a Redhat AS 4. I then set the oracle variables, hoping after that I can get the database up and running. However I get this error, when trying to start the listener or sqlplus:
lsnrctl: error while loading shared libraries: libclntsh.so.9.0: cannot open shared object file: No such file or directory
Is this library part of a certain RPM? Where can I get this RPM or this lirary?
Thanks.I copied across an /opt folder from a Redhat 9server that has Oracle 9.2.0 to a Redhat AS 4.
So you are saying that you copied the whole
ORACLE_HOME to a new server?? Are you using same
username/group on new server?? Did you relink the
binaries after copying it? What is the output of ls
-l on ORACLE_HOME dir and as what user you are
running lsnrctl command??
Daljit SinghYes I copied the folder that has Oracle_Home and datafiles.
i have created the oracle user.
How do I relink the binaries?
I run it as oracle. -
Hello
While starting a few games(for example Spring and Tremolous) I get the following error:
error while loading shared libraries: libopenal.so.0: cannot open shared object file: No such file or directory
and the start interrupts. How to start these games?skottish wrote:
eldragon wrote:
skottish wrote:Does tremulous build off of the source code? If so, rebuild it against the newer openal. Symlinking libraries is a very bad idea.
could you explain further? there must be something im missing
The best way to do it in my opinion is to grab the tremulous build files using ABS:
http://wiki.archlinux.org/index.php/ABS
Once abs is installed and run, the tremulous file will be located in /var/abs/community/games/tremulous. Copy the tremulous folder to somewhere where you have write permissions, enter the directory, change pkgrel=4 to pkgrel=5 in the PKGBUILD, and run makepkg. If all goes well you'll have a new package in that directory after it's done compiling. Then you can install it by running 'pacman -U <whatever the file that ends in .pkg.tar.gz>.
i was talking about the dangers of symlinking libraries actually... -
Error while loading shared libraries: libdb.so.3
Hi,
While running adconfig, I am getting below error:
/iAS/Apache/perl/bin/perl: error while loading shared libraries: libdb.so.3: cannot open shared object file: No such file or directory.
It is new cloned environment of 11.5.10.2 with 11g db on linux 64 bit server.
I checked for rpm compat-db-3.3.11-4, it is existing. What is the problem?
Thanks,
KavithaHi Kavitha;
please check below note:
On 11.5.10.2/Redhat Enterprise version 5.2, Running Autoconfig adconfig.Sh Perl, Error While Loading Shared Libraries: the libdb.so.3: can't open shared object file: no such file or directory [ID 730656.1]
Regard
Helios -
Error while loading shared libraries: libgij.so.7rh
Hi everyone,
I just installed jdk1.6.0_06 on red hat linux 5 server, and try to run a simply java class but have the following error message:
java: error while loading shared libraries: libgij.so.7rh: cannot open shared object file: No such file or directory
I have added the following into /etc/profile
export JAVA_HOME=/usr/java/jdk1.6.0_06
export PATH=$PATH:$JAVA_HOME/bin:$JAVA_HOME/jre/bin
export CLASSPATH=.:$JAVA_HOME/lib:$JAVA_HOME/jre/lib:$CLASSPATH
Can you kindly indicate the cause for this issue? Thanks a lot.
Best,
VovoTsaiYou have GNU Java installed by default on many Linux distributions and this is being picked up ahead of the Sun Java. You can change the PATH declaration to make sure that the Sun Java is found first.
export PATH=$JAVA_HOME/bin:$JAVA_HOME/jre/bin:$PATHI have removed GNU Java from all my Linux installations. -
I got the error when I run the Identity server "./start_ois_server"
Using Linux Threading Library.
/opt/netpoint/identity/oblix/apps/common/bin/ois_server: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
rm: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
OIS Server started with pid: 11241
[root@EX4200SRV02 bin]# /bin/sh: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
Can someone help me resolving this issue?
thanks. Your help is very much appreciated.
thanks.I resolved the issue by commenting "LD" in start_ois_server.
-
Error while loading hierarchies in sap bw
Hi All,
Iam getting the below error while loading hierarchy from flat file. While scheduling infopackage iam getting ....
Error 8 when compiling the upload program: row 657, message: A newer version of data type /BIC/B0014446000 was...
Can any one please resolve the issue....
Regards,
KalyaniIt wasn't any issue with Hierarchy load actually. He might have done some changes to the InfoSource and activated it. But some time you need to refresh the complete tree or run \nrsa1 to refresh the widow otherwise it gives error.
It shows to the system both the copies of the infosource new and the modified and so throws this error.
This is also the case in case of time stamp error, where you do some changes to DS again and the time stamp in system metadata
for this DS (re-activated) dosen't matches witht the one expected as it's creation time stamp preiously. So in this case also you need to re-activate and refresh/re-login into the system again.
Maybe you are looking for
-
Now that I've installed 10.4, there is no more auto-fill in the genre field nor, when you're editing in the main window, is there the ability to tab from one field to the next anymore. Did I miss a setting or did Apple leave this feature out of 10.4?
-
MacBook Pro will not read files on Lacie External HD
Yesterday I had a heck of a time getting my macbook to even see my Lacie HD. I downloaded a new driver installed in and it worked well. Everything was running perfectly. I ejected the HD and finished my day. Today my Macbook sees my HD but when I
-
A wierd error of JDBC Receiver adapter
Dear Expert, I got stuck by the JDBC receiver adapter with PI 7.11, the log is 'JDBC Message processing failed, due to Error processing request in sax parser: Error when executing statement for table/stored proc. 'null' (structure 'SYSTEM'): java.lan
-
Login Page takes long time to load
Hi, There is a peculiar issue with one of the portal we have. If portal is being accessed through the standard url i.e http://<fqdn>:<port>/irj/portal its takes more than 3-4 min everytime to load on the browser. Even once user id & pwd given it take
-
How to present the reports to superiours
Hi, I have got the reports ready for presenting to all FI Managers, but i'm in dilemma in presenting the reports to FI Managers, the reports are getting excuted in the browser. Can anybody tell me how to present the reports to Fi