Breaking message processing for perticular message in Biztalk Orchestration.

Hello All,
In above Orchestration I need to break the process for particular incoming message
if the decide condition get TRUE, I also don't want to execute further shapes if condition is TRUE.
I have tried using Terminate shape but it has stopped whole process...!
Please share if anybody have an IDEA.
And also share some links regarding how to break and continue (C#) in BizTalk, if any.
Thanks all

You've noticed that there is no simple "End Shape" so there's two ways to handle this.
Make sure the control flow is such that when the 'break' condition is hit, there are no other Shapes until the end of the Orchestration.
Set a Flag that you can use on further Decide Shapes to skip that logic.

Similar Messages

JDBC adapter disconnects, if there are no message processing for 2 days

Hi All,
I have sender JDBC adapter configured, which polls messages every 3 mins.
XI is constantly polling the database (SQL Server) and since there are no messages on weekends, after a certain interval, it disconnects... giving a null exception.
I have checked the advance option "Disconnect from Database After Processing Each Message". still it is giving this error. I am on SP 12.
Can someone please let me know, what could be the reason of this null exception. why does it disconnects if there are no message processing for a long interval.
Any help would be appreciated.
Regards,
Amit

It means we don't support that file type for doing imports. It sounds like a reasonable request to [add to the Exchange|sqldeveloper.oracle.com] though.

Stateful message processing for async scenario

Dear all,
my async scenarios:
1. RFC -> PI -> File
2. File -> PI -> RFC
Following facts:
- The second message is a response to the first one. Both message are separted and async.
- Scenario 2 can be send some hours after Scenario1.
- A response should only be send if a specified field in the message of first scenario is filled.
For example: Message in scenario has a field <ResponseNeeded>YES</ResponseNeeded>
This field does only exist in message of scenario 1.
- Both message have an ID field (e.g. <ID>4711</ID>) which can be used to identified the
corresponding message.
Questions:
- Is it possible to use stateful message processing for this scenario? Or do I need BMP + Correlation?
- A service interface with pattern "stateful" can only be used synchronously. So is it
possible to use this stateful for async message processing at least?
I would assume that I will need a BPM that sends the messsage and keep alive until a
response will be sends with same ID. After this I would check message of scenario1 and
send (or even not) the message of scenario2 to receiver depending on <ResponseNeeded>.
Thanks in advanced.
Chris

Hi Chris,
Although BPM is possible here, I would not recommend you to use one here for the reason,
>>Scenario 2 can be send some hours after Scenario1.
This means you are keeping a process alive for so long which is not a good thing to do.
You could end up with a lot of open/live process instances.
Having said that, if you still wish to go ahead with BPM, the steps would be
1. Receive async (RFC req) - start process, correlation based on ID.
2. Switch step (Evaluate ResponseNeeded)
branch 1(True): a. Send asynch step - File
b. Receive async - File correlation - ID.
c. Send async - RFC call.
branch 2(false) a. Send async -File
3. Stop process.
Regards
Jai

[svn:bz-trunk] 24018: Updates to the message to send across only required message attributes for small message format

Revision: 24018
Revision: 24018
Author:   [email protected]
Date:     2012-07-11 02:23:31 -0700 (Wed, 11 Jul 2012)
Log Message:
Updates to the message to send across only required message attributes for small message format
Modified Paths:
    blazeds/trunk/modules/core/src/flex/messaging/messages/AbstractMessage.java
    blazeds/trunk/modules/core/src/flex/messaging/messages/AsyncMessage.java
    blazeds/trunk/modules/core/src/flex/messaging/messages/CommandMessage.java
    blazeds/trunk/modules/core/src/flex/messaging/messages/ErrorMessage.java
    blazeds/trunk/modules/core/src/flex/messaging/messages/Message.java
    blazeds/trunk/modules/core/src/flex/messaging/messages/RemotingMessage.java

Im not sure what's the problem, but let's try to figure it out. First of all explain what do you mean by "it works very bad". Doest it hang, is it slow, is quality unacceptable.
Myself, I have one problem with JMF. When i run video & audio on my Centrino 1.4 GHz, it just takes 100% CPU! And of course quality becomes degraded. Check if you have something like this.

Custom processing for ALEAUD01 messages ??

Hi Everyone,
Whenever ALEAUD01 IDocs are sent to XI, it is treated as an acknowledgement message by the system. We can see the IDOC in IDX5, but it does not go into the normal receiver determination route.
Is there any way/setting in XI which will allow to define custom configuration for ALEAUD messages. For ex: i want to pass all ALEAUD01's through a BPM for logging to a custom tracking module.
Thanks & Regards,
Renjith.

Hi,
Thanks for the reply Shravan. However, our landscape has different R/3 systems, for a ZALEAUD01 message custom dev/maintenance has to happen on all the systems.
I was thinking of a work around..Like...
The ALEAUD01 IDOC would be sent to a different client on the XI system(other than the Integration Engine)..where in a Z-FM would be written to process the IDOC. This Z-FM would make an ABAP proxy call to the Integration Engine, with an interface using the ALEAUD01 structure, which will be received by a BPM.
I am going to try this out.
Pls give ur comments as to whether there are any drawbacks/problem that might arise.
Thanks & Regards,
Renjith.

Message Tracking for Rejected Messages

We are using Exchange 2013, trying to use message tracking to determine if a message that was sent to us was rejected, I can run the messagetracking powershell command and I get reslults. would there be a "reject" event id for these messages?
Thanks
Pat

Hi ,
Below command will be used on the exchange management shell to have a grid-view on the output.
Get-TransportService | Get-MessageTrackingLog -recipients "[email protected]" -ResultSize unlimited -MessageSubject "test" -eventid "fail" | Select-Object eventid,sender,timestamp,@{Name="Recipients";Expression={$_.recipients}},@{Name="RecipientStatus";Expression={$_.recipientstatus}},messagesubject
| Out-GridView
(or)
Below command will be used on the exchange management shell to have the output on the csv file.
Get-TransportService | Get-MessageTrackingLog -recipients "[email protected]" -ResultSize unlimited -MessageSubject "test" -eventid "fail" | Select-Object eventid,sender,timestamp,@{Name="Recipients";Expression={$_.recipients}},@{Name="RecipientStatus";Expression={$_.recipientstatus}},messagesubject
| Export-csv c:\nithya.csv
Reference
Link for message tracking : http://exchangeserverpro.com/exchange-2010-message-tracking-log-search-powershell/
Thanks & Regards S.Nithyanandham

Modify the message type for the Message no. CK239

Hi,
I would like to change the message type E to W for the message CK239.
Is it possible?
Thanks.
Jean-Marc

Hi,
yep, agree with Eli. Please check this [thread|Re: T-code SE91 queries ??; on the issue of changing messages.
Rgds
Karl

Is it possible to disable New Message sound for SPAM messages?

I inherited a role email account which receives an incredible amount of spam. Mail's SPAM filters do a good job or routing these messages to the SPAM box and keeping them out of my inbox, but I still receive a "New Message" sound notification every time a new SPAM message arrives. Is it possible to disable the "New Message" sound alert for SPAM messages while still receiving the alert for new messages that arrive in my inbox?
Thanks,
jason

Try this:
Go into Preferences -> General and uncheck the box that says "Play sounds for other mail actions".
I'm not sure if it will work since that's really still "new" mail, but it might be worth trying.

Add message preview for unread messages

Is there a way in the main message inbox all unread messages can display a short preview (Outlook has this option)?
I don't mean displaying a preview pane for a single highlighted message. I want a short message preview that displays in the Inbox for each individual unread message.

Thanks for the note, Jeffrey and trust me when I say I'm a die-hard Apple believer. But, at work I support Windows machines and Outlook has views to show only unread messages. As soon as a messages is read and we move on to the next messages, the read message drops out of the list. This is what I'm look for so that I can apply it to the few Macs I also support at work.
What Apple's Mail gives us is good, but what we were hoping was to have the smart mailbox work the same way that Outlook's feature does. However, I still much prefer working with Mail rather than with Outlook. So, we will adjust.
Thanks again.

IDoc processing for same message type but diff extensions

Hi
I want to send idoc when a material is changed. Everything is in place and have also done a test scenario. In partner profile i had the message type linked to basic type and tested which is fine. Now i wanted to have one more idoc created for another extension having the same basic type and linked to the same message type. Have maintained the same in WE20 but when i executed BD10 i could only see one idoc been generated but i need to see two idoc (one for basic type and another for the extended) not sure where i'm missing. any pointers on it pls?

Hi ,
if you want to trigger the idoc two times for basic type& Extension..
1 ) you need to maintain WE20 Partner Profiles (This is good already you did)
--> But the Output type for Bsic type & extension type is same so output type is triggered Once so idoc is created One.
2) try to create another Output type in T-code NACE for extension then two Idocs is created one for Basic and another for Extension.
Regards,
Prabhudas

PI 7.1 SOAP Adapter - Message Payload for Failed Messages - Where to find

We are exposing a webservice through SAP PI. Occassionaly we have customers calling our webservice and some failure occurs. The error is usually the way that the customer is calling the webservice (missing elements, misnamed tags, bad content in the WS payload..). Generally in these cases we can see the error in communication channel monitoring.
Here is an example:
12/12/11 4:39:07 PM com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.engine.interfaces.messaging.api.exception.MessageFormatException: cvc-complex-type.2.4.b: The content of element 'SupplierInvoice' is not complete. One of '{"":Invoice}' is expected. at line 1, column 227
12/12/11 4:39:06 PM request received for a channel
I understand the issue, but it would be extremely helpful to have the full SOAP Envelope and Payload of a request when it fails. The communication channel will show a SUCESSFUL message payload with a link to it. But it does not show a failed one.
Where can I find the FAILED payload that accompanies this message? These failures occurs before any mapping or being seen in RTWB Adapter Engine message monitoring... I did some searching around, but did not find anything offhand. I would greatly appreciate any pointers from anyone who has crossed this bridge.

Hi,
When the web service is being called by external application, the first point of contact would be the sender communication channel which converts the SOAP message into XML message and pass to integration engine ( In case of success )
But if the web service call fails due to WSDL validation, Authentication issue, Bad content, invalid content type, you would not see the payload in the sender communication channel or in Adapter engine. You can just see error message in the sender communication channel . I have experienced this many times and i always ask the web service team to provide the SOAP message for validation/investigation purpose.

Giveing 3rd parties access to message tracking for their messages?

Hello,
Before I go looking at documentation to see how I would like to find out if it is possible, with Oracle SOA Suiet 11g R1 PS2/3 B2B, to configure the B2B Web Console in such a way that a 3rd party can be given view access to message tracking and/or KPIs for partnerships that involve their messages only?
The purpose of this is to selectively provide visibility to 3rd parties and minimise the effort the hosting infrastructure support needs to go to to help troubleshoot messaging issues.

Hi Michael,
Now the question on what is the Enterprise Identiry storeAn Enterprise Identiry store is a store which maintains authentication information of all the users of an enterprise and categorizes (or groups) them into particular roles, for e.g. a LDAP system. By default, each weblogic domain has an embedded LDAP server which stores the information of all the users of that domain. The Default Authentication, Authorization, Credential Mapping, and Role Mapping providers of Weblogic use the embedded LDAP server as their data store.
and where do I look to find out how to created the users, the roles and the assignments So if you are working with default Weblogic LDAP, then you have to just create a user on Weblogic and assign it to appropriate group. Then assign a specific role to this user on B2B console (because B2B uses the Weblogic's security framework for authentication & authorization). I have written a short blog on the same which you may refer (here I have added a user in Host TP so it belongs to Host Admin/Monitor, you may perform same steps to add a user in remote TP user's tab to make it remote admin/monitor) -
http://anuj-dwivedi.blogspot.com/2010/10/enabling-weblogic-user-to-login-on-b2b.html
You may also refer section "5.3 Adding Trading Partner Users" in B2B user guide -
http://download.oracle.com/docs/cd/E17904_01/integration.1111/e10229/b2b_tps.htm#BABHCGFJ
To understand Weblogic's security framework, you may refer -
http://download.oracle.com/docs/cd/E17904_01/web.1111/e13707/toc.htm
http://download.oracle.com/docs/cd/E17904_01/web.1111/e13747/secroles.htm#i1206135
Regards,
Anuj

Message rule for sent messages

Hi,
I have successfully converted and repaired all my Outlook Express mail to Apple Mail 3.5 with Emailchemy. I have aprox 450 folders and 5000 mails. I have used more than 200 rules to organize my incoming messages but I cannot find the way to store "sent messages" in the right folder. I don´t want to store my replies in sent messages. I need my reply inside the folder where the message rule previously stored my incoming message. is it possible?
Warmest regards,

There are several possibilities.
The simplest of course is not to bother. When you reply to a message, Mail puts a link (a little anti-clockwise curved arrow) in the status column of the original message, and clicking on that brings up the reply.
You could set up Smart mailboxes. This would leave the replies in the Sent mailbox, but also make them visible in the appropriate Smart box. The rules for the various Smart boxes would have to be designed to pick up both original messages and replies.
If you really must get the replies into the same folder as the originals, you will need some sort of Applescript. You could for example have a Mail rule, fired by any incoming message, which runs an script to look at all messages in the Sent box, and identifies the box to move each to. How is your scripting?
Another script-based possibility is to have a script to generate the replies. Since it would know which box it was working from, it would know which box to put the reply in, and it would require less maintenance (as your requirements change) than the previous.
Perhaps the best solution for you, requiring the least effort, would be to use the Mail option to automatically CC (or BCC) yourself. The resulting copy is an incoming message - so your 200 rules should pick it up and move it to the appropriate mail box.
AK

Mail sending new message notifications for Old Messages

Hi,
Since upgrading to Mavericks I've been having a ton of problems with the Mail App.
I'm running on a Macbook Pro (13-inch Early 2011 Model) with 4gb of RAM and OS at version 10.9
I have Mail connected to two different accounts 1 Gmail and one Exchange. The recently released "Mail Update" has not fixed these issues.
The primary issue is that every time I have Mail open it constantly pops up notification badges to say that I have new messages. In fact it is sending these notifications for messages that are in most cases months old. Moreover even after confirming these the next day it will repeat this for the same exact messages. I've attempted to rebuild the index by deleting the Envelope files in the Library as suggested in another discussion topic. This didn't correct the problem. The result of this beyond the annoyance of having the notifications constantly popping us is it also seem to make my system grind to a halt - while it is parsing these sometime 100's - of notifications.
I believe related to this (but not clear) is that in many cases delivery of messages to my exchange account is very very delayed. I will receive a message on my iPhone Mail app sometimes hours before it syncs into my Laptops Mail app (even with attempts at Manually checking mail.)
Anyone have any suggestions on how to repair this issue?
Thanks a ton,
Mark

Try this:
Go into Preferences -> General and uncheck the box that says "Play sounds for other mail actions".
I'm not sure if it will work since that's really still "new" mail, but it might be worth trying.

Fiedl Validation for Warning Message not for Error Message

hi all,
we know for field validation, once it not meet the validation, it will throw out the error message and don't allow you to save the record.
But is there any way to show warning message just a note then user can continue the operation?
Thanks
Amanda

hey ady,
Is there any authoritative explanation from oracle which mention this part? As I need to follow it to our client which explain this is impossible.
Thanks
Amanda

Breaking message processing for perticular message in Biztalk Orchestration.

Similar Messages

Maybe you are looking for