BROADBAND OVER PPoe Internet connect keeps asking me a reminder

I recently got a broadband connection that runs through the ethernet via PPPoe, Actually, as I'm writing this it's after popping up again... It states:
Internet Connect, This is your reminder that your connection is still active. Do you wish to remain connected?
Athough this is a good feature there seems to be no option to knock it off, and this is very irritating since my broadband connection is always on
Is there any way to stop this from happening?
Thanks for everything
Peter

Have a look at the fifth graphic and "Session Options" on this page:
<http://kb.earthlink.net/case.asp?article=7547>
eMac Combo 1GHz/1GB/60GB   Mac OS X (10.4.7)   CanoScan D646U, Canon iP1600, CrossFire 120GB, DSL, D-Link DI-624

Similar Messages

  • Internet Connect Keeps Bugging Me

    Every 15 minutes or so while I'm online, Internet Connect keeps asking me whether or not I want to stay connected. Is there any way I can stop it from doing that? It's annoying.

    Hi,
    System Preferences -> Network -> (Your connection type) -> PPP -> (PPP Options...) -> Prompt every XX minutes to maintain connection

  • HT5625 My wireless internet connection keeps defaulting from my network to a neighbors' when the computer is left idle for a few minutes. How do I reset to my stay on my network?

    My default internet connection keeps defaulting to a neighbors' network when left idle for a few minutes. How do I reset to use my network?

    Likely both of you have Open networks and the Mac is just connecting to the strongest one, hopefully it's just that.
    If you set a encryption and a password, then it shouldn't be doing this.
    WiFi security issues, at home and WiFi hotspots
    If you can't do this yourself, then have a local geek come by and set you up.
    Also if you head to System Preferences > Network > Airport > Advanced, there might be a connection list, you drag your connection to the top and remove the ones your not going to use.

  • 'Internet Connect' keeps coming up

    My internet was down all day yesterday (SBC-Yahoo DSL). Today it is back up. All morning I continue to get the 'Internet Connect' box that comes up and asks if I would like to keep the connection. My 'Location' is set to 'Automatic' and the 'Show' is set to 'Network Status'.
    How do I change my settings to stop this box from popping up every 15 minutes or so?

    Thank you, Niel.
    Have made the changes. Will see if this fixes the problem. If not too much trouble could you take a look at my 'connection' problem (another post) and let me know if you can figure that one out.
    Thanks so much for your help!

  • Internet connection keeps dropping at night

    I'm having a bit of a weird problem with my internet connection. I connect via an ethernet cable and the connection keeps dropping. It generally starts after 7pm and seems to be every 40 minutes. I have changed the microfilters and ethernet cable but I'm still getting this problem. The really weird thing is that all four lights on the hub are blue but the computer cannot connect to the router. Sometimes the connection will just drop other times it will say limited connection. I've finally had to resort to windows diagnostics and sometimes even that doesn't work. I swapped my black hub with the old white one and  I didn't have this problem of the connection dropping but my connection speed dropped to 1.5 - 2mb.
    I was thinking maybe there was something wrong with my ethernet card but now I think it must be something in the black hub because the white one worked. Am I correct in thinking I need a new router?
    ADSL line status
    Connection information
    Line state
    Connected
    Connection time
    0 days, 0:12:42
    Downstream
    10,407 Kbps
    Upstream
    1,232 Kbps
    ADSL settings
    VPI/VCI
    0/38
    Type
    PPPoA
    Modulation
    ITU-T G.992.5
    Latency type
    Interleaved
    Noise margin (Down/Up)
    6.4 dB / 6.3 dB
    Line attenuation (Down/Up)
    35.0 dB / 18.7 dB
    Output power (Down/Up)
    0.0 dBm / 12.9 dBm
    Loss of Framing (Local)
    0
    Loss of Signal (Local)
    0
    Loss of Power (Local)
    0
    FEC Errors (Down/Up)
    977 / 4294967264
    CRC Errors (Down/Up)
    0 / N/A
    HEC Errors (Down/Up)
    N/A / 0
    Error Seconds (Local)
    0
    BT speedtester
     Download speed achieved during the test was - 8442 Kbps
     For your connection, the acceptable range of speeds is 4000-21000 Kbps.
     IP Profile for your line is - 9181 Kbps

    Hi lostof,
    If you can fill out the contact us form in the "about me" section of my profile we can have a look for you.
    Cheers,
    Chris
    BT Moderator Team.
    If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • Installing Sprint Broadband High Speed Internet Connection

    I am getting 11bps internet connection with my dial-up server, AOL.
    Sprint has sent me the materials that are, for a huge price of $69 a month, supposed to give me broadband speed which I simply must have in order to attend online art classes which I am beginning next week.
    Does it make any difference if I insert the disk before the laptop is turned on, or if I insert it while the laptop is already turned on?
    I am totally scared to death to do this. I'm afraid something will go awry and I will screw things up. Any one here who has been through this? And knows the possible pitfalls? And can guide me through it?
    I've read the printed instructions through 3 times and they are NO help. They are not clear or informative, so that I feel sure and secure of what to do and what to do next. I am floundering....and the clock is ticking! Help!
    Cyan

    Hi Cyan,
    No worries either way on the disk, but no benefit of having it in first... you must still be a little bit stuck in the Windows® universe!
    There'll be an installer once you open the CD, but it won't boot your Mac like some PC stuff does.
    In fact, I think you/we can set it up without their CD even.
    Seriously, don't worry yourself on this, it'll be easier than the documentation, and if that weren't enough, if I or others can't help you, I'll put out a Bat Signal for the best AOL helper in the whole world... Ali B., and help is but a parsec away.

  • Internet Connection Keeps Dropping

    So for a couple of months now my internet connection has been randomly dropping out. It happens sometimes a couple of times a night, sometimes not at all. When the connection drops out the router seems to power off (all lights turn off, power light turns red). After a couple minutes the router seems to reboot and everything is fine. During this time FiOS TV continues to work.
    I have now had 3 new routers and new ONT. None of this has solved the problem. I have tried multiple coax lines and that hasn't solved the issue. I have tried moving the router to a location with better ventilation and that hasn't solved the issue. I have tried plugging the router into a UPS and that hasn't solved the issue. I have tried plugging the ONT into a UPS and that hasn't solved the issue.
    I am about ready to drop FiOS all together, a connection that randomly drops out multiple times a night just is not usable. I can't play any internet games for fear of getting disconnected, I can't watch videos without it stopping halfway through. I have a tech coming out Friday but I am not sure what they can do.
    Does anyone have some suggestions?

    Yeah, I have a suggestion, read this: http://forums.verizon.com/t5/FiOS-Internet/Verizon-FIOS-Router-Actiontec-MI424WR-GEN3I-Issue-Dropped...
    It's 39 pages of the same thing that's happening to you. Enjoy.

  • My internet connection keeps reverting back to using a manual proxy server configuration pointing at 127.0.0.1 Port 55414. I've tried the help regarding the user.js and prefs.js files but still it continues to revert to the manual proxy configuration!

    I know how to change my network settings to fix my internet connection, I just select "Auto-detect network settings for this network" under Tools, Options, Network, Settings. However every time I close down Firefox it reverts to the manual proxy configuration pointing to 127.0.0.1 Port 55414.
    I've tried all the suggestions under saving your preferences but this hasn't worked so I'm at a loss as to what to do next. If I can't sort this I'll have to revert back to Internet Explorer as this doesn't have this problem!

    I know how to change my network settings to fix my internet connection, I just select "Auto-detect network settings for this network" under Tools, Options, Network, Settings. However every time I close down Firefox it reverts to the manual proxy configuration pointing to 127.0.0.1 Port 55414.
    I've tried all the suggestions under saving your preferences but this hasn't worked so I'm at a loss as to what to do next. If I can't sort this I'll have to revert back to Internet Explorer as this doesn't have this problem!

  • After upgrading to IOS 8, the password for my internet connection keeps telling me is incorrect (when I know it is correct).  Has anyone else experienced this?

    Internet connection was disconnected, and now when I try to log back into my same network, it tells me my password is incorrect.  Have validated with my ISP that it is correct.

    just upgraded to 8.1, and that took care of the problem!

  • Wh does the internet connection keep dropping on my macbook pro and mac pro

    I have a Mac pro, Macbook Pro and iphone. All have problems with the internet connection especially after any short period of in activity. My mac Pro is connected directly with an ethernet cable and the mac pro wireless. I have to go through system preferences network setup all the time to reconect. Soemtimes whn on email choosing take all accounts online does cause a reconnect but only after a minute or so wait.

    Done that.. many times... also did a lot of suggestions from other posts.. removing pls files etc.. nothing works and it seems to be something experienced by other.. mysstery is it happens on all 5 computers in the office.. my isp has no suggestions... the pro can loose connection and the macbook wifi is OK and the phone usually works OK but leave my Macpro for 5 minutes and `I need to reconnct using system preferneces...

  • Outlook 2003 and my modem connection keeps asking me for my password!

    And it's getting REALLY annoying to have to type this in everytime.
    Modem keeps asking me for my WEP, which is already saved in the settings.
    Outlook 2003 (Vista) keeps asking me for my password for receiving and sending email everytime. This password is ALSO saved in the settings. Oh, and then I get an error message stating it cannot perform these functions.
    This never used to happen during dial-up when I had it. This is excruciatingly annoying.
    With outlook, it was happening on and off, but now consistently.
    Modem, just started today.

    Hello emily's.phone
    You'll find a thread covering a similar problem here. It may be of some use to you. There are also some great contributors here who will chime in with answers.
    Welcome to the Verizon discussion boards.
    ElizabethSl

  • Internet Explorer keeps asking if it is okay to run Adobe Flash Player.

    I am having a problem with Adobe Flash Player working with Internet Explorer 11. Whenever I visit a site that has content that needs Flash Player to load, Internet Explorer prompts me asking me if it is okay. When I see allow, all that happens is the website refreshes and instead of displaying the content, I am asked again. This happens over and over. What can I do about it?

    My setting is medium-high. Here's a more detailed description of my problem:
    I am having a problem with Adobe Flash Player with Internet Explorer 11. The problem is that whenever I visit a website that has content that needs the flash player in order to work, Internet Explorer asks me if it is okay to run the content. When I click "Allow", the page refreshes and I am asked again. I do not understand why it behaves this way because I have all Adobe plugins for Internet Explorer activated.
    To see the problem that I am having in action, watch this video.

  • ATV does not streaming over my internet-connection via cable-model but very fine over my umts-modem. Whats the Problem?

    Hello Community! At first sorry for my not perfectly english.
    I dont understand this issue. I've a ATV2 and have no problems to stream videos from youtube or videos from my macbook. But if i want to rent a film from the itunes-store i get a message that die film ist ready in many hours (3 to 5) but this status is never changing - i've been waiting for 2 days an the message is the same.
    When i connect the ATV whit my 3G-Huawei-UMTS-Modem it takes only a few seconds and the film starts.
    My internetconnection by cablemodem ist very well - i've 13 Mbit down and 512 kbit up ... ist's many more than the UMTS-modem ...
    I'm searching in the internet for any requirements, that ATV want's to have ... nothing. I want to ask my ISP but he have the chance for the simple answer ... well, the internet is working, it must be a problem whith die ATV or the Itunes-store ... and what's my counterattak?
    Please, if anybody have a idea or any tip ... i'm very thankfull.

    The Ethernet cable from the modem should be connected to the AirPort's WAN (circle of dots) port and a second Ethernet cable should be connected between the AirPort's LAN (opposing arrows) port and the Ethernet port on the Apple TV. Is this the case?
    If so, what is the make & model of the modem that the AirPort is connected to. Also what is the exact model of both the AirPort and the Apple TV?

  • Internet Accounts keeps asking for Google password

    I've enabled 2-step verification on my Google account.
    I've had this account set up in Mail.app so it has an entry in my System Preferences > Internet Accounts
    Now, with 2-step from Google, there are Application specific passwords. Mail.app can no longer use my Google account password. I had to log in to Google and create a password just for Mac Mail.app.
    That worked just fine. Mail is now checking my Gmail for me.
    When I open System Preferences > Internet Accounts and look at my Google account, it asks for my password. My Google ID password no longer works, as I'd expect. So I entered my Application Specific password for Mail.app.
    This is the problem. It asks me three times, every time I want to look at my Google account details in System Preferences.
    Sound familiar to anyone? Anyone solve this?
    I tried creating an app specific password for System Preferences, but that didn't work.

    I just had exactly the same issue!
    Some extra info:
    Happened only in 2 of my gmail account (have several)
    One of them had 2nd factor auth enabled (account 1)
    The other one use simply a password (account 2)
    Both accounts accept the password on the 3rd try
    for the account ,1 it is the application specific password
    for the account, 2 it is the normal account password
    Moreover:
    account 1 uses: Mail, Contacts and Calendar
    account 2 uses only Mail
    Right now the issue in both accounts is 100% reproducible
    Account 2's password is rather long (>18 chars) and complex (Upper, Lower, Number and Symbols)
    This could indicate and issue, but I bet there many more user who had such extremes
    Even if that was the issue, account 1's application specific password is pretty simple and of a fixed size
    Seems like a bug on Apple's side...

  • Sys Internet Accounts keeps asking for gmail passwords

    I have three gmail accounts within Mac Mail and ever since last Yosemite software update, the Internet Accounts alert from System Preferences pops up prompting me to enter password again.  This is annoying.  Any suggestions?

    Applications/Utilities/Keychain Access - try deleting the passwords there. While there, Keychain Access menu/First Aid.

Maybe you are looking for

  • Flash menu in DW, how do I link the buttons?

    Hi there! I have a problem, i'm creating a site in dreamweaver with a lot of flash objects. For examlpe I'm making a flash menu, wich is the hole problem! I'm importing the flash file to the left frame in dreamweaver and i'm trying to link the button

  • HT5570 When I  enable two step verification , do i need a code

    i have enabled two step verification and my iPhone 5s is a trusted device now my iPhone 5c I'm login into iCloud and not asking me for verification just my email and password , i think one time it asked me for good and now it does not My question is

  • I downloaded Premiere Pro CS6 trial on my mac and it doesn't show up! Any Ideas?

    I was looking into buying adobe Premiere Pro CS6, so I signed up for the trial and signed in and downloaded it. But straight after downloading it, NO applictaion showed up in my applications folder! I don't think I've done anything wrong, I've done t

  • Edit cell in sap.m.table

    Hi, how I could enable or editaable a cell in sap.m.table? This is my soruce code: var productTable = new sap.m.Table("orderItemsDisplay",{ growing:true, visible: true, growingThreshold: 5,        columns : [ new sap.m.Column({            minScreenWi

  • Quotation locked by the user

    Hi, I have one quotation in R/3 which when i open in change mode always shows that quotation is locked by the user so and so. That user actually defined as RFC user for communication between R/3 to CRM. Can anybody guide me how delete the lock of tha