Quotation locked by the user

Hi,
I have one quotation in R/3 which when i open in change mode always shows that quotation is locked by the user so and so. That user actually defined as RFC user for communication between R/3 to CRM. Can anybody guide me how delete the lock of that user.
Earlier response will be appriciated.
Yash

Shailaja,
Thanks for quick reply. I checked in SM12 earlier but it's not there. Thanks.
Yash

Similar Messages

Locking all the users

if we have locked all the users including sap* and accidently you have logged off.. ?? then how to come out of this situation.

You can modify the lock status of users directly in the database.
Go to table USR02 and set field UFLAG to 0 (locked it can be 128).
It should be sufficient for user SAP* to logon again an fix the rest.
Regards,
Daniela

Do we have any API to Lock-Unlock the User

Hi all,
i want to check the status of the user(Unlock or locked) through my webdynpro application and depending on the condition,i want to change the status.
please guide me in doing so.
Thanks and Regards,
Mithileshwar Dayal Sahu.

Hi,
You can use interface IUserAccount.
There are methods :
isLocked()
isPasswordLocked()
isUserAccountLocked()()
lockDate()
setLocked(boolean lock, int reason)
http://help.sap.com/javadocs/NW04S/current/se/com/sap/security/api/IUserAccount.html
Regards
Abdul.

Wrong named locked into the user enrollment field in T61

Hi everyone,
I setup a new T61 laptop computer under someone else's name, but it ended up getting re-assigned. They were able to change the name everywhere except the User Enrollment field that comes up to put the fingerprints in. That box is greyed out with the first name I put in and I'm not sure how to change it.
Any tips?

The "..at this time" message" sometimes appears when an atypical home folder (eg. one on a network share) isn't available for some reason. I don't use "Filevault", but that might qualify as atypical, since the home of a "Filevault" account actually resides on a disk image.
Since you were able to attach and mount the ".sparseimage", it would appear that at least your ".sparseimage" is not corrupt, so the most dreaded reason for being unable to log in to a "filevault" account fortunately doesn't apply. Before attempting to troubleshoot this issue, just make sure that you are able to "mount" your backup copy to make sure it transferred successfully.
I'm guessing but it could be that by attempting to change the account password using the disk, the repair tech created a situation where the "account password" does not match the ".sparseimage" password. The two must be in agreement for login to proceed smoothly, and this is why the "Accounts" pref pane will not let you change a "Filevault" account password unless you are actually logged in to that account. By using the disk, the tech bypassed this safeguard. The first thing to do would be to try to reset your "account password" - there are other ways to do this, one of which is to boot the computer from the installer disk to use the "Reset Password" function.
http://docs.info.apple.com/article.html?artnum=106156
Make sure to set it to exactly what it was before - ie. identical to the password that is known to have unlocked the ".sparseimage" file. Then reboot and see if you can log in with that password. If not, log in to any other account, open "/Applications" > "Utilities" > "Terminal.app" and post the output of this command, substituting the appropriate username:<pre>nicl . -read /users/username</pre>

Keep saying the project is locked by the user ~~~. can't open my project.

i made my first idvd project almost a year ago.
now i tried to open the project with my different user id.
i changed my id when my hardware crushed about 6months ago.
i don't have my previous id anymore.
when i tried to open the dvdproject that i burned.
it keeps saying the project can't be opened at this time.
i tried to unlock the file from doing getting info and changing the ownership and detail as it's said at the idvd help.
but, still doesn't open.
does anyone know how to solve my problem?

You are most welcome.
Do you still have your iMovie project on your computer? If so, you can just drag it's icon (the one with the star on it) into your iDVD project. Drag it to the edge of the menu window, not into a drop zone.
Also, this would be a good time to do a couple of simple things that might help. Close down your iDVD project, and then trash the file com.apple.iDVD.plist found in User/Library/Preferences. iDVD will create a new file on relaunch. Before relaunching, do a permissions repair, using the Utilities/Disk Utility app on your Mac. When you call up disk utility, read the screen to see how to do it.
Hope you get things running right.

HT201441 I do not know who activated my Find My Phone Device on my ipad, the pad is locked to the user's account and I cannot remove the account. Please what can I do?

Good work to the experts in the house. I have an ipad that I have been using for a while now and someone recently picked it and toyed with it. The person activated Find My Phone device on my ipad and the pad locked to his account. I have tried to reach everyone I know to remove this account but I couldn't get anyone to give a right code. The e-mail address of the person didn't show properly for me to contact who the person is, I have done recovery to the pad but still asking for the person's code. I couldn't use my ipad since this happened to me. I need somebody's help to use my pad again. Thanks.

Did you buy the iPad from someone?

Visual Studio Test Controller recovery locks out the user domain account, cannot log into PC

On the recovery tab of the Visual studio Test controller Services properties dialog, there are three recovery settings:
First Failure, Second failure and Subsequent failures. The default settings for these options is to "Restart the Service". I changed my domain password this morning, restared the PC and could not log in because the Visual Studio Test Controller
service tried to restart with the wrong credentials in an infinite loop. This resulted in my account with the domain controller getting locked out. The delay between service restarts was very quick and I could not login and stop the service. The kind admin
fellow logged in to the PC and changed the service settings.
Is there a place where the recovery service restart interval can be changed to prevent this situation?

Hi bcautest1,
>>I changed my domain password this morning, restared the PC and could not log in because the Visual Studio Test Controller service tried to restart with the wrong credentials in an infinite loop. This resulted in my account with the domain controller
getting locked out.
You said that you couldn't log in, do you mean that you couldn't log in your machine or others?
If you change the domain password, generally we could open the Test Controller configuration and change the logon account for this service.
But if you mean that you couldn't log in your windows now, I'm afraid that it is not the test controller and Agent issue, it would be the windows issue, because it still has this issue even if you use other servers.
Reference:
https://technet.microsoft.com/en-us/library/cc773155(v=ws.10).aspx
Like the following documents here:
http://stackoverflow.com/questions/4468677/domain-account-keeping-locking-out-with-correct-password-every-few-minutes
Maybe the Window support forum would be better for you:
https://social.technet.microsoft.com/Forums/windows/en-US/home?forum=w7itprosecurity
If I misunderstood this issue, please feel free to let me know.
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Materials are locked by the own user (XIUSER)

Hello all,
We are facing som problems with an Interface for billing.
We are using en XI interface for billing, we are using parallel processing, bye the volume (from 25,000 to 30,000 invoices during night) is not possible to use simple processing.
The process starts with Sales Order creation, Delivery, and Billing, but sometimes at the time for the Billing, the system sends error M3024 'Valuation data for material & is locked by the user XISERVER' . I hope that any of you can help me, I'm new on XI and this problem starts to be critical.
Thanks

As already commented, the error occurs because some other work process is accessing the same data and then it cannot be accessed.
That needs to be corrected by using ENQUEUE/DEQUEUE techniques in the abap coding of the interface.
But even if some of the entries error out, if the execution is asynchronous they will be automatically persisted and sent again.
Regards,
Henrique.

Batch lock of the material by user

Hi,
   The scenerio is-
         User1 is doing the following transaction-Create stock transport PO fora material (plant 1000 to plant 1100) - Create outbound delivery VL10B(Goods issue is also done- and he is in the screen MIGO(goods receipt in plant 1100 against outbound delivery for which goods issue is done.Automatic batch determination is activated and the batch is determined by FEFO method.
         User2 is creating a sale order for the same material from plant 2000.Subsequently, delivery is created and batch is determined and also the batch determined is the same as that of the previous one.
        Now both are in the same screen.When the user2 is trying to do PGI the system is giving error message the batch of the material is locked by the user but the interesting this if it is viceversa ie with the user2 in the delivery screen and the user1 is trying to take goods receipt in plant 1100,the system is allowing to take the goods receipt of the material.
       I also tried the following change in configuration-SPR0->Materials Management->General Settings for Materials Management->Set material block for goods movements.
      I changed from lock exclusively to late lock but the system is still not allowing in the above mentioned scenerio.
      Can any one tell why it is so and what is to be to rectify the same.
regards,
Nithin

Hi Gabo,
Check please if Late Lock is configurated.
If you still having the problem, please check note
0001422983 - MIGO: Message M3682 during goods movement to same batch
If you decide implement this note, please check your 'Z' programs that call many module functions or updates to tables in order to have the 'COMMIT & WAIT' necesary (this note could be cause of incorrect update of characteristics in batch if you already have perfomance issues in your server or poor time response of this 'Z'programs).
Regards.
Tania

Error while query execution - Query getting locked by another user execute

Hi All,
I am facing an issue ..
When I execute a query I am getting an error message ie popping as blocked by some other user. And I able to see the lock when I go to SM12. If the other user logged off or if we unlock his entry, then both the workbook and query is getting executed as expected. What can be the reason for this phenomena?
In my understanding, in the same time multiple users can execute the query /workbook. But in our case its not allowing.
Can someone suggest a resolution at the earliest, as it is affecting the reports in live environment
Regards
Mathew

The Bex Analyser (Front end) Patch is 501 and the SAP BI is 15.
The error message that I am getting while executing the query is "The object requested is currently locked by user --".
When I go to SM12, I can see a lock in the user's name.

" Project Locked by Other User" HELP!!!

Hi Everyone!
I am having a problem opening my daughters 1st year DVD. Last summer, our iMac died, and we replaced the hard drive. We were able to salvage all the files, and put them onto an external.
Now, I am trying to open one of those salvaged files from iDVD, and I am getting this message:
The project Mairead...The first year1 is locked by the user Steph (user ID 501): 2008-11-30 17:23:42 -0500.
The project can't be opened at this time.
I've tried switching the username to Steph, and it still doesn't work. When I click on it and open the info, it says everyone is "read and/or write" ---
Please help!!! I don't know what to do...
Thanks!

Take a look at:
http://discussions.apple.com/thread.jspa?threadID=1495274
especially the comment by markwd21

Need to customize the User Administration in EP

Hi all,
I have an unique requirement from the client. They need to give a role to the support person which should have only two options;
1> To Lock/Unlock the Users in EP.
2> To Reset the Users in EP.
Please let me know your suggestions.
Regards
Neha

Hi Neha,
UME API can be used independent of UME datasource; I suppose.
Yes.
I will sugest you to follow the procedure provided by JIGAR, it will be helpfull to you.
Thanks
Anil

Error mesage: Project locked by other user?

Hello,
I just re-opened my external hard drive after a month vacation from it and tried to open my IDVD file only to get an error message:
Project locked by other user:
The project ZOOOM demo reel 10-07 is locked by the user Video (used ID 501): 2007-12-19 10:42:27-600
The project can't be opened at this time.
I went into the file's "get info" and unlocked everything to no avail. I'm puzzled. I have never seen this before. Any help would be great.
Thanks,
Jordan

Control click on the icon of your external drive and select Get Info. Check the box that says, "Ignore Ownership on this Volume." See if that solves it.
Make sure that your hard drive is formatted for Apple. Should be Mac OS extended or Mac OS extended (journaled). But if you reformat, be sure to first move your data to another drive, because reformatting will erase all data on the drive.
If that doesn't work, use the Disk Utility app on your Mac to do a permissions repair on both your startup drive and your external drive.

Project Locked by Other User! But it's me!

Today I wanted to open an old (2006) iDVD projectfile (.dvdproj) with iDVD 7.1 and I got a messagebox of the program which said:
"Project Locked by Other User
The project America del Sur is locked by the user casper (user ID ###): 2006-04-30 20:253:34 +2000.
The project can't be opened at this time
<OK>"
Does anybody knows what I can do about it to open my project. I want to burn a new DVD of this project. Please help me

Take a look at: If your archived project can’t be used by others at http://docs.info.apple.com/article.html?path=iDVD/7.0/en/6719.html

Getting error "Document is locked by other user, please try again later"

Hi Sap gurus,
We have one invoice which is in approver's list. The approver is not able to neither approve this nor reject this invoice, the error message he gets is "Document is locked by other user, please try again lateru201D. We have checked SM12 and we could not find ant lock on this object for the user.
We have tried few function modules indicated below to unlock the work item, to change the status, to complete the work item, to forwarding this work item by another user and finally even to delete the work item.
SAP_WAPI_SET_WORKITEM_STATUS
SAP_WAPI_WORKITEM_DELETE
SAP_WAPI_UNLOCK_WORKITEM
SAP_WAPI_WORKITEM_COMPLETE
SAP_WAPI_FORWARD_WORKITEM
We have also tried deleting this invoice from the system, but still we get the same error. Can any body please help us providing the any other function modules by which we can unlock an invoice or to delete the invoice from the SRM system.

Hi,
Please review note 1277002 Wrong error message "Document is locked..." for Invoice. And also note 1178295 BBPAPPROVAL: Document gets locked by the User.
These notes should resolve this issue.
Kind Regards,
Lisa

Quotation locked by the user

Similar Messages

Maybe you are looking for