Broken screen, Accidental damage protection not given by the hp service(ENVY-J049TX)

The laptop was on the bed and accidentally somebody sat (on the corner) on it by unintentionally. The laptop is really super slim, and with the bed cover color it was fully disguised in there. When i opened the lid the screen was broken. Took that HP laptop to local service center. After 7 days local hp service send me a mail that "the reason is neither accidental, nor coming under  the following  criteria of the ADP service". Please anyone give any suggestion  how to get my ADP. Or what to do now?? I would like to hear the view of any HP representative on this forum. I'm loosing hope for hp.

Hi Tatha2014,
I just sent you a private message. If you are not sure how to check your forum messages, this post has instructions.
Regards.
I worked on behalf of HP

Similar Messages

  • I have a Cracked Back on my iPhone 4. How much is it to fix? Its Accidental damage therefore not Covered by the 1Year warranty.. :(

    I have a Cracked Back on my iPhone 4. How much is it to fix? Its Accidental damage therefore not Covered by the 1Year warranty..
    I have looked around the site seem to be getting back onto the same page.
    also does anyone know what the bluetooth does on iphones I cant seem to use it to connect to people on iphones, Same with Printing pictures It doesnt Allow bluetooth to send them its searches for an 'AitPrinter' ?! What is an air printer, lady in the Apple Shop didnt seem to know.

    Out-of-Warranty Service
    If you own an iPhone that is ineligible for warranty service but is eligible for Out-of-Warranty (OOW) Service, Apple will service your iPhone for the Out-of-Warranty Service fee listed below.
    iPhone model
    Out-of-Warranty Service
    iPhone 4S
    $199
    iPhone 4, iPhone 3GS,
    iPhone 3G, Original iPhone
    $149
    http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipho ne

  • Lack of Accidental Damage Protection (ADP) in Consumer Laptops in Malaysia

    Model: HP Envy TouchSmart 15 j137tx
    OS: Win 8.1 64bit
    Hello HP,
    I recently bought an HP Envy Laptop. Based on the price & specifications, I believe that it is one of the high-end products in its line. I intend to use it in long-term, which is why I invested in the high-end side of the product range.
    Let me tell you about my nature of work. My job requires me to travel a lot. Meetings and audit are just a few of the regular tasks that I do and of course these kind tasks need a laptop. Therefore I bring my laptop wherever I travel. I am lucky to have all the work sites here in the Klang Valley; therefore I am able to travel using the public transportation. I use the train (LRT) a lot, which understandably puts my laptop under the risk of accidental damage.
    When I bought my laptop just a month ago, I missed to consider the prospect of Accidental Damage Protection (ADP) as my insurance policy. However, I believe an established enterprise like Hewlett Packard, which has presence worldwide, would be able to offer its consumer this kind of protection. Boy how I was wrong.
    I realized how important the ADP to me based on my job description and requirement and I quickly browsed my laptop web page to look for a suitable HP Care Pack. The word “ADP” did not appear so I called the Sales Hotline. My horror then came true; ADP is not offered in more than 10 HP Care Packs available for my laptop model.
    I was shocked as well as enraged to discover this. I was told by the sales representative that the ADP is only available for the enterprise devices. I wonder why HP is not offering the same level of protection to its consumers. I wonder whether the enterprise client is more important than its consumers.
    To my eyes, the HP products look good. It feels good. However, the customer service in my opinion is lacking. It is a sad statement but I cannot say that I am a proud owner of a HP machine.
    Dissapointed,
    Edy

    PeerOne wrote:
    This is what I call "Read the  Fine Prints" carefully before making purchases. Consumers must endowe themselves with knowledge ahead of time before making purchases on anything nowdays. Whether or not they offer it isn't something the users on here can do about it since this is a user forum not a HP support Forum. The reason why the consumer laptop is less expensive is because it doesn't have all those other extra stuff that is why they can sell it less in consumer version. What ever the demand is for inexpensive laptop and less extra stuff there will be a market for it. The consumer themselves must do the homework and find that laptop will best fit their needs and what other extras do they need for their line of work not what is pleasing to eye or least expensive to get.
    I agree and admit that part of this is my error on my side.
    I take this as a lesson learnt - never purchase an IT device solely based on the specifications; you have to really drill yourself to determine what you really need from your device and it's manufacturer (in my case: ADP). You also have to think long and hard because sometimes customer service is usually something that we think we do not need; usually in early stage or period of the ownership of the device, but if you plan to use it long-term, and especially when you need maximum up time and stable operability, a good customer service is probably what you want to have with your device purchase.

  • IPad 4th generation with Accidental Damage Protection

    I have purchased an iPad 4th generation with Accidental Damage Protection on January 27, 2013 but it's still in perfect condition and I'm using an OtterBox Defender Case.  The iPad has never been dropped even in the OtterBox Defender Case.  There will be a new iPad Air 2 coming by the end of the year.  If I want to trade in the old iPad for a new iPad Air 2 that ships with iOS 8.  What happens if I have remaining time left on the protection plan if I want to trade in for a newer iPad model?  The protection plan is unused?

    Hi Keith,
    Like Mbrguy mentioned, you would be able to cancel your service plan for a pro-rated refund if you ultimately decide to trade in your current iPad through our Trade In program. If you still have the original box, documentation, and Apple accessories, then make sure to bring these in as well to ensure you receive the highest trade in value possible. Just remember to remove any accessories that weren't originally included with the device though as these parts typically do not have a trade in value.
    I hope this helps!
    Aaron|Social Media Specialist | Best Buy® Corporate
     Private Message

  • Adp accidental damage protection scheme

    how to check( adp)  accidental protection scheme activated or not9

    According to the Accidental Damage Protection Service Agreement, service is only available in the US.
    http://download.lenovo.com/lenovo/lsw/adp_sa_global.pdf
    You can check to make sure by dialing Warranty Service in Romania at:
    40-1-330-4555
    40-1-330-4536
    Did you find a post awesome? A great response? Kudo them!
    Did the post you read answer your question? Did someone help you figure out your problem? Hit Solution Provided and give that person a 'thank you' for helping you out!

  • How do I force the player to open in the center of my screen every time, and not way on the side?

    How do I force the player to open in the center of my screen every time, and not way on the side?

    Solution is very simple, Just choose firefox as your default browser.
    Follow these steps :
    * Open '''Options'''
    * Click on '''Advanced'''
    * Now open '''General''' tab and click on '''Make FireFox The Default Browser'''. See Image below.

  • After updating to Yosemite, my screen saver settings are not maintained.  The screen saver reverts to some Apple default.  There is no way to get my setting to be maintained.

    After updating to Yosemite, my screen saver settings are not maintained.  The screen saver reverts to some Apple default.  There is no way to get my setting to be maintained.

    Hi ..
    Might be corrupted preferences.
    Open the Finder. From the Finder menu bar click Go > Go to Folder
    Type or copy paste the following:
    ~/Library/Preferences/com.apple.screensaver.plist
    Click Go then move the com.apple.screensaver.plist file to the Trash.
    Restart your Mac then reset your screen saver.

  • BLACK SCREEN stating "windows could not start because the following is miss

    I installed Bootcamp update 2.1 and then XP SP3.
    Now when I start up my Mac I am getting a BLACK SCREEN stating "windows could not start because the following is missing or corrupt: <windows root>\system 32-hal.dll Please re-installl a copy of hte above file"
    I tried to use the option key and insert the Windows CD but it won't start up.
    Also, when I start up I must use the option key and select the Mac OS and it will start up and everything is fine there. Advice appreciated.

    Did you ever solve this? I had updated to BC 2.1 (After updating Apple Software Update al on the Windows side) I waited & just tonight tried to install SP-3. It appeared to install & When I was prompted to restart--I also got the black screen. Mine said:
    Windows could not start because the following file is missing or corrupt:\Windows\inf\biosinfo.inf
    You can attempt to repair the file by starting Windows setup using the original setup CD-ROM. Select ‘r’ at the 1st screen to repair.
    I just force powered off & booted into Mac.
    I think I need to restart my Mac into Windows (using the Option key ) WHILE THE WINDOWS XP CD is in the optical Drive. Then maybe I’ll get a choice to select ‘r’ to repair at the 1st screen?
    You may need to do essentially the same thing. I do not know if this problem is a boot camp problem of just a Windows problem.
    Sure is annoying,
    Good luck!

  • HT4623 i cant open my iphone, its showing that ( iphone is dsabled, connect to itunes) when i connect to itunes its showing message on computer screen that ( itunes could not connect to the iphone, because it is loked with passcode. you must enter your pa

    I cant open my iphone, its showing that ( iphone is dsabled, connect to itunes) when i connect to itunes its showing message on computer screen that ( itunes could not connect to the iphone, because it is loked with passcode. you must enter your passcode on your iphone to connect with itunes.
    appreciated

    Place the iPod in recovery mode and then restore the iPod to factory defaults/new iPod.  For recovery mode see:
    iPhone and iPod touch: Unable to update or restore

  • Message uses a character set that is not supported by the internet service

    Does any one have any advice on how to fix this problem?
    E-mails sent from my iphone 3G periodically arrive in an unreadable form at the recipient. The body of the e-mail has been replaced with the message "This message uses a character set that is not supported by the internet service...." The problem e-mails also include an attachment that contains an unformatted text file containing the original message surrounded by what appears to be lots of formatting data that is displayed as gibberish.
    This occurs sometimes, but not always, even with the same recipients. I am sending e-mail through a G-mail account that is configured on the iphone using IMAP. I have tried the gmail account to use the two available formatting options for mail, but neither fixes the problem.
    I have also upgraded to 2.01 and restored a few times without impact.

    Hi,
    I got somewhat similar problem with special charecters(German umlaud �,�,�..).
    I create a file with java having special charecters in it. Now if I open this file I am able to view the special charecters in it.But If I attach this file send it using following code then receiver can not see the umlaud charecters in it.They get replaced by _ or ?
    MimeBodyPart mbp2 = new MimeBodyPart();
    FileDataSource fds = new FileDataSource(fileName);
    mbp2.setDataHandler(new DataHandler(fds));
    mbp2.setFileName(output.getName());
    Multipart mp = new MimeMultipart();
    mp.addBodyPart(mbp2);
    msg.setContent(mp);
    Transport.send(msg);
    From you message it looks like you are able to send the mail attachment correctly(by preserving special charecters).
    Can you tell me what might be wrong in my code.
    I appriciate your efforts in advance.
    Prasad

  • Generic service 'Analysis Services (TEST1)' could not be brought online (with error '1060') during an attempt to open the service. Possible causes include: the service is either not installed or the specified service name is invalid.

    Hi,
    We have a cluster with 2 nodes. Everything works fine in Node1. When I try to failover TEST1 database to Node-2 it fails with this message.
    Generic service 'Analysis Services (TEST1)' could not be brought online (with error '1060') during an attempt to open the service.  Possible causes include: the service is either not installed or the specified service name is invalid.
    Any help is much appreciated.
    Thanks

    Hello,
    The error message is pretty straight forward, it's saying either the service isn't installed or it's not installed as the same service on that node. Did you install analysis services on the second node (from the error it seems like it isn't)?
    Sean Gallardy | Blog |
    Twitter

  • Essbase server is not showing in the windows services (11.1.2.1)

    Hi All,
    Essbase server is not showing in the windows services 11.1.2.1. when I checked the processes from task manager it is there.
    Regards,

    The windows service for essbase in 11.1.2.x is an OPMN service "Oracle Process Manager..."
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Payslip does not appear on the Self Service Page

    Hi all ,
    I would like the system to display the Payslip of an employee on his self-service page so that when the user logs in he or she can view his/her Payslip.
    When i click on the Function Payslip it says ERROR on Page.
    I have Run International HRMS Global.And as the organisation is in Africa it doesn't have any specific localisation.
    So can anyone assist me on how can i customize the JSP page so that the Payslip appears on the Self-Service page of an employee.
    Thanking you in advance,
    Chetan

    ypu have posted the same query in HRMS, few people have responded to that thread
    Payslip does not appear on the Self Service Page

  • Why my photobook in elements 10 does not give me the online services sizes options?

    I am using element 10 and my photobook does not give me the online service size options.It only give me the 8.5 x 11 local printing option. Does anyone know what can i do to get other size options?

    Not able to see it for PSE 12 too.I think online service sizes are off from Adobe side as Adobe controls these. Let`s wait for some time and check again.

  • "The PowerPivot service application could not connect to the Analysis Services instance"

    Hi
    I am baffled by this one.  I have a PowerShell script I have built up to install PowerPivot, which I have put together by reading various blogs and by picking apart the scripts that come with the PowerPivot installer.
    However, once I have built the service app and installed/activated the solutions and features, I get the error "The PowerPivot service application could not connect to the Analysis Services instance" when trying to use it.  I can't find any
    more detailed messages, even with verbose logging turned on.  SSAS\PowerPivot is of course installed and connected to Excel as it should be.
    I have tried running the PowerPivot for SharePoint validation tool and it doesn't find anything.
    If I install PowerPivot using the PowerPivot for SharePoint installer, then delete the service app and rerun my scripts, everything then works fine.
    So there is something the installer is doing that I am not, but I cannot for the life of me figure out what it is.  I though it might be permission related, but the official installer installs the service under the farm account, not my BI service account. 
    Ahaa, I thought, but when I then reinstall the service myself with my scripts, using my BI service account, the service app then works, so I don't think it can be permission related.
    Doing a Google search on that message pulls up only one old post (repeated a few times), which talks about using a domain account for the SSAS instance instead of a Local System account - I am using the same domain service account for SSAS, Excel and
    PowerPivot already, so that doesn't help me much.
    Does anyone have any ideas for me or suggestions on how I might proceed?
    Andrew vR

    Did you run the "Run PowerPivot for SharePoint Configuration Tool" after installing PowerPivot and did that work okay?
    Kind regards,
    Margriet Bruggeman
    Lois & Clark IT Services
    web site: http://www.loisandclark.eu
    blog: http://www.sharepointdragons.com

Maybe you are looking for