BrowseTo Path Parameter Question

I have three forms - the file names are:
"form1summary"
"form2Details"
"form3other"
In the first form, I have a sub form that has the 2nd form. Depending on command button the user hits, the sub form is refreshed with new information or form 3 is brought loaded in the sub form view.
What should be the path in the Browse To Macro?
Thanks!
Νικοσ Γιαννιοσ

Action argument
Description
Object Type
The object type to which to browse.
Object Name
The object that loads inside the subform control referenced by the Path to Subform Control argument.
Path to Subform Control
If specified, the path from the main form of the application to the target subform control that loads the object specified by the
Object Name argument.
Where Condition
If specified, replaces the Where condition of the object record source.
Page
If specified, sets the page of the continuous form that will be made the current page. This argument is Web only.
Data Mode
If specified, the data entry mode of the form.
https://msdn.microsoft.com/en-us/library/office/ff822020.aspx

Similar Messages

PowerShell not accepting path parameter.

I have a PowerShell script that needs to accept parameters that happen to be a path to a local directory. When I enter in the path parameter, such as "C:\temp\my direc\" I get the following error..."Get-Item
: Cannot find drive. A drive with the name '"C' does not exist."
I have not been able to get past this...anyone had any luck with this? Thanks

Thanks for the response Cees van Alten...however, using single quotes produces the same error...''c:' does not exist.
I read a blog that suggested adding an additional "\" at the end might do the trick, but had no luck there as well. I know someone must have ran into this before...welcoming any ideas.

Validation and F4 help on an application server file path parameter

Hi
I have a field on a selection screen called File Path and it is for a download program where the user needs to specify the path for the download (NOT THE ACTUAL FILENAME).
I am trying to find a function or method that allows a user to use F4 help to browse for a directory rather than a specific file. There are lots of posts out there asking this question but all of the answers point to functions that allow you to browse for a particular file rather than just the file path/directory.
Does anyone know of a function that provides F4 help to browse for a file path on the Server (NOT PC). I would want the user to just be able to select the directory or path and have the path returned. They should not need to pick a specific file.
F4_DXFILENAME_TOPRECURSION is a very good function but unfortunately it makes the user pick a file rather than just a directory.
In addition to this, does anyone know of a function or method that allows you to then validate the path\directory that is entered?
Thanks for your help
Nicole

Hi,
You can try with the FM 'EPS_GET_DIRECTORY_LISTING'. With this Fm module you will get you the list of files of a particular path in an internal table. Then you can populate this internal table in F4 help.
Hope this solves your problem. If any difficulty, come back to me about that.
Below are some other FM related to application server directory. Hope these Helps.
EPS_GET_DIRECTORY_LISTING
EPS_GET_DIRECTORY_PATH
EPS_GET_FILE_ATTRIBUTES
EPS_GET_FTP_SYSTEM_INFO
Regards,
Shailesh Jadhav

File Path Control question

Simple question: How do I invoke the Open command in the File Path control? My reason is of my user hasn't supplied a file, then I want to force the user to select one.
Solved!
Go to Solution.

Most file related vi should prompt if there is no file path. If for some reason you are not getting that you could check to see if the file path is empty and add a prompt see below:
Tim
Johnson Controls
Holland Michigan

Massive mp3 file(path) move question

Alright so I recently purchased a 2 terabyte network server for my home network. The purpose of this is to move all my music, movies, photos, etc. to the network drive in order to clear out all that space on my laptop's drive. At this point and time, I've only copied all my music to network drive. Figure the next step would be is to delete all my music off my local drive. But then got a little worried about iTunes. Now when I delete my music off my local drive, iTunes will be looking for the mp3s via the originated file path. Obviously the file is not going to be there. So when this happens in iTunes, the circularly enclosed exclamation point pops up and iTunes wants you to manually and find the file for it to play. So essentially my question is... Since I'm doing this on a large scale, Is there an easier way to get this done?
Best solution I was able to come up with was to delete all the songs in iTunes and re-drag all the music back in there. BUT... the problem I have with that a good majority of the music's album artwork were manually put in by me (kind of uh...yeah about seeing the album artwork on the screen when I'm listening to my iPod). So I don't want lose all that it. Help! Kind of long, I know. Appreciate any help or suggestions.

Thanks for responding Brian -
The message I get is Error Code -2147467259
Conn Execute.vi->InsertIntoFrom.vi<ERR>Exception occured in Microsoft OLE DB Provider for ODBC Drivers: [Microsoft][ODBC Microsoft Access Driver] Could not find file 'C:\Project\APDSS\DataBase\ExternalInterface.mdb'. in Conn Execute.vi->InsertIntoFrom.vi
When my query looks like
INSERT INTO InternalInterface SELECT Field1, Field2 FROM ExternalInterface.ExternalTable WHERE Id = '065649-101-750';

Type parameter question

I'm trying to figure out if I can simplify this interface definition:
public interface BaseService<T extends BaseEntity<ID>, ID> {
    public T find(ID id);
    public void persist(T entity);
}To implement this interface, I have to do something like:
public class CountryService implements BaseService<Country, Long> {}Where Country is defined like:
public class Country extends BaseEntity<Long> {}My question is: Is there some way to get rid of the second type parameter in BaseService, so that I can do this instead:
public class CountryService implements BaseService<Country> {}but still enforce the type of the id parameter on the find() method in BaseService?
The obvious solution doesn't compile:
{color:#ff0000}public interface BaseService<T extends BaseEntity<ID>> {
   public T find(ID id);
   public void persist(T entity);
}{color}
Any help is greatly appreciated!

Hi,
Another suggestion is to parametrize BaseEntity on a ID hierarchy
public abstract class BaseEntity<T extends ID> {
    public abstract T getId();
}This can lead to the following the BaseService:
public interface BaseService<T extends BaseEntity<? extends ID>> {
    T find(ID id);
    void persist(T entity);
}Now if you define Country as
public class Country extends BaseEntity<ID> {
    @Override
    public ID getId() {
        return null;
}and finally CountryService as
public class CountryService implements BaseService<Country> {
    @Override
    public Country find(ID id) {
        return null;
    @Override
    public void persist(Country entity) {
}Hope this help.

Generics parameter question

I'm trying to create a binary tree that implements Map, or extends AbstractMap.package binarytree;
import java.util.Collection;
import java.util.Map;
import java.util.Set;
import java.util.Map.Entry;
public abstract class MapTest<K, D> implements Map<K, D> {
     public Set<Entry<K, D>> entrySet() {
          // TODO Auto-generated method stub
          return null;
     public void putAll(Map<? extends K, ? extends D> m) {
          Set<Entry<? extends K, ? extends D>> s = m.entrySet();
          // Error on the above line.
                //Type mismatch: cannot convert from Set<Map.Entry<capture#1-of ? extends K,capture#2-of ? extends D>> to Set<Map.Entry<? extends K,? extends D>>
}I'm using Eclipse. It wants me to change the line to :
Set<?> s = m.entrySet();I don't understand. EntrySet() is supposed to return Set<Entry<K, D>>, where K, D are the type parameters of the Map. The type of my Map parameter, m, is Map<? extends K, ? extends D>. Shouldn't m.entrySet() return Set<Entry<? extends K, ? extends D>>?
Why is does Eclipse want me to define the return value as a Set<?>?

Let me try an answer. First of all, generics in Java are not covariant, meaning that even though Integer is a subtype of Number, List<Integer> is not a subtype of List<Number>.
While someone using putAll could pass a Map<Apple,Pears> one day, here and now the compiler assigns the artificial type names capture#1 and capture#2. While these are subtypes of K and D respectively, Entry<capture#1,capture#2> is not a subtype of Entry<K,D> according to the rule above. Consequently the assignment between the two is illegal. Wrapping Set around it makes it even worse.
One mistake made easily goes as follows: Set<A extends Wine> is a set that in the future someone will use to store all kinds of Wine derivatives. THIS IS WRONG! The set will be used to store all kinds of A derivatives.
Consequently, Entry<capture#1,capture#2> will, in the future be some very specific type. And this type is certainly not compatible with Entry<K,D>. This is why the closest possible variable definition proposed by Eclipse is Set<?>.
A lot of in depth information about this stuff is provided by [Angelika Langer|http://www.angelikalanger.com/GenericsFAQ/FAQSections/TechnicalDetails.html]. While trying to answer your question, I also put together this.
Harald.
Edited by: pifpafpuf on Dec 6, 2008 7:05 PM
Edited by: pifpafpuf on Dec 6, 2008 7:07 PM

C parameter question

Ok, so I am currently in the process in writing a C library for a small kernel I am making for fun, and my question is:
Is it possible to have a function specify only one parameter in the code and have any extra parameters put into an array, let's call it extra[].
Here is the code I have:
unsigned int k_printf(char *message)
char *vidmem = (char *) 0xb8000;
unsigned int i = 0;
i = (line*80*2);
while(*message != 0) {
if(*message=='\n') {
line++;
i = (line*80*2);
*message++;
else if(*message=='%s') {
else {
vidmem[i] = *message;
*message++;
i++;
vidmemcount++;
vidmem[i] = WHITE_TXT;
i++;
vidmemcount++;
line++;
return 1;
I am currently trying to make a close but less powerful printf() equivalent. For example:
printf("My name is %s and my friends name is %s", myname, friendsname);
I want to be able to make an extra[] array that stores myname and friendsname in extra[0] and extra[1]. Is this possible?

ewaller wrote:
itsbrad212 wrote:
Ok, so I am currently in the process in writing a C library for a small kernel I am making for fun, and my question is:
Is it possible to have a function specify only one parameter in the code and have any extra parameters put into an array, let's call it extra[].
Here is the code I have:
unsigned int k_printf(char *message)
char *vidmem = (char *) 0xb8000;
unsigned int i = 0;
i = (line*80*2);
while(*message != 0) {
if(*message=='\n') {
line++;
i = (line*80*2);
*message++;
else if(*message=='%s') {
else {
vidmem[i] = *message;
*message++;
i++;
vidmemcount++;
vidmem[i] = WHITE_TXT;
i++;
vidmemcount++;
line++;
return 1;
I am currently trying to make a close but less powerful printf() equivalent. For example:
printf("My name is %s and my friends name is %s", myname, friendsname);
I want to be able to make an extra[] array that stores myname and friendsname in extra[0] and extra[1]. Is this possible?
Okay, here goes:
where is line defined, allocated, initialized?
where is vidmemcount defined, allocated, initialized? what is it used for?
Avoid *80*2. Especially in multiple places. Use a #define in case you change the size latter.
Even better, how about creating records on the heap using malloc and then keeping an array of references to the records.[Edit :: Never mind -- I see what you are up to. Ignore this]
Rather than :
while(*message != 0) {
if(*message=='\n') {
line++;
i = (line*80*2);
*message++;
else if(*message=='%s') {
else {
vidmem[i] = *message;
*message++;
i++;
vidmemcount++;
vidmem[i] = WHITE_TXT;
i++;
vidmemcount++;
How about :
char* vm = vidmem;
while ( *message)
if ((*message)=='\n')
vm=vidmem+SPAN * (++line);
message++;
else
*(vm++)=*(message++);
*(vm++)=WHITE_TXT;
edit : fixed bug in my code
Thanks for the tips! Any speed improvement whatsoever is crucial when doing things like this.
Here are those defined at the beginning of the functions.h file:
unsigned int line = 0;
char *vidmem = (char *) 0xb8000;
unsigned int vidmemcount = 0;

NTRIALS Parameter Question...

What exactly does the NTRIALS parameter of the FCSET command do? It can't be the number of regressions the the forecast engine goes through is it?
Also, is this the correct forum for DML questions?
Thanks for your time.
GGA

Greg, it took a little digging to find this one. I'm told that NTRIALS has no effect on the forecast, however it can be queried after the forecast to see how many trials can be reported by the FCQUERY function.
Hope this helps. This is probably as good a forum as any for DML questions.

Zone path location question

I am rebuilding our Zone hosting server and the Zone paths are currently located on the SAN through an iscsi mount. My question is: If I plan to use Live Upgrade should the zone paths be in the root partition instead?
Also, if you have any suggestions about using Live upgrade with non-global zones I would like to hear them as well.
Thanks,
Dave

Which file system you are using?
I have patched several guest ldoms running several zones with Live Upgrade. Every zone's zroot is on separate zpool (because of HA). This way it is quite easy to migrate a single zone to second node (in the event of disaster)
One thing that you should remember is that Live Upgrade with ZFS does the patching by using ZFS snapshot. For example, if you do the patching to a live system (which is supported with Live Upgrade!) and the application running on the zone is storing its data on the same file system where zone's root is, the application's data might be out of date after you reboot the machine using the new BE that was created by Live Upgrade.

Essmsh - path parameter

Hello,I'm trying to pass a path as a parameter of a scr file:essmsh script.scr c:\backup.txtThe problem is when i'm trying to use the passed value shell returns syntax error near[':'].for example: export database sample.basic data to data_file $1;Is there any way to pass the path and the use it?

Thanks for help,It works when there is no full path in passed parameter (problem with . and : characters). When I use single quote it treats $1 as it is and tries to create a file named $1.thanks

Simple parameter question ie db_name and usage in an expression

Hi,
I just started with SSIS with an example containing a flat xls file with 5 columns and a source table in sql.
The example works fine no parameters etc.
What I want to try out is to make an exception that if a certain db_name = X then the flow should be redirected to another table.
Basicly I need help how to define a parameter to read from the source database like "select db_name as db_name" and use this in the package flow. When db_name=X then flow A ELSE flow B
Any help is very appreciated.
-Miracles are easy, the impossible takes a bit longer-

Hi Paul,
Create an object variable with name varObj and create a string variable with name as varDBName
Use this as source query in execute sql tasK: Select <DBNamefield> from Table. In execute sql task do the following:
On General tab: set Result set as Full Result Set
On Result Set tab: Click Add and set Result Name as 0 and select varObj as Variable Name. This variable will capture the value returned from the select statement.
Take a for each loop container and configure it as:
On Collection tab: Enumerator: for each ado enumerator; ADO Object source variable: varObj; Enumeration Mode: Rows in first table.
On Variable Mappings tab: Select varDBName as variable and set Index as 0.
Inside the for each loop put the data flow task. Configure the data flow task and use a conditional split to redirect the rows based on varDBName as : @[User::varDBName]=="x" and so on for different outputs
Nitesh Rai- Please mark the post as answered if it answers your question

Another multi value parameter question

I have spent the last six hours researching and testing this and I am getting nowhere. I am using CR 2008 and SQL Server 2005. I have a main report that has a six level cascading prompt. The values for all of the prompts are number values. The lowest level prompt is a multi value prompt. I need to pass the value(s) from this prompt to a subreport so I have created this formula field which I have seen in many of the posts:
WhilePrintingRecords;
Shared numberVar counter;
//increments the loop so that all parameter entries can be displayed
Shared stringVar display;
//creates a string "running total" so that all entries can be displayed
for counter := 1 to Count({?Hierarchy - DOUNum}) do
display := display + ToText({?Hierarchy - DOUNum}[counter],0,";");
display;
I display this on my main form and I run across my first problem. The first DOUNum is 19903 and the second is 19904. What I see in the report though is 19,90319,904. I need for it to be 19903,19904. Before i knew the formula was doing this I passed this formula to my subreport for record selection there. That subreport has the DOUNum field in it and that field is a numeric field, so when I try to put this in my record selection formula:
{spCSSReportNCounts1;1.DOUNum} in [{?Pm-@DOUNum}]
I get this error: A number range is required here.
How in the world can I get around these two problems?
TIA

Okay, I have the formatting issue resolved. Here is my new formula:
WhilePrintingRecords;
Shared numberVar counter;
//increments the loop so that all parameter entries can be displayed
Shared stringVar display;
//creates a string "running total" so that all entries can be displayed
for counter := 1 to Count({?Hierarchy - DOUNum}) do
display := display & "," & ToText({?Hierarchy - DOUNum}[counter],0,"");
Mid(display,2);
This gives me 19903,19904 to pass to the subreport in my subreport link parameter - ?Pm-@DOUNum
When I tried adding the = sign:
{spCSSReportNCounts1;1.DOUNum} = {?Pm-@DOUNum}
I get the error: A number is required here.
And when I try this:
{spCSSReportNCounts1;1.DOUNum} = [{?Pm-@DOUNum}]
I get the error: A number range is required here.
Which is the same error I get when i switch out the = for IN:
{spCSSReportNCounts1;1.DOUNum} In {?Pm-@DOUNum}

Path selection question for an image of neurons

I have a photo of neurons taken by a microscope as a TIFF. I'd like to remove the black background color and any "cloudiness" that appears in the photo but still maintain the detail of the neurons and the connections. Essentially, I'd like to change the color of the neuron related pieces to something other than red. I'd also like to pick up most of the detail in the photo that relates to the neuron without taking along any of the black background (see second image attachment). I also want to be able to set the neurons on a different color background that's solid and not murky. I just upgraded my version of Photoshop from CS2 to CS5 and definitely noticed a difference in its ability to pick up the paths. I don't know if I'm being too demanding of Photoshop or if I'm not getting the result I want because there's a better approach. I would greatly appreciate any suggestions on how to go about doing this.
Thank you!
Karen
I tried selecting a path with the color selection tool (taking just the reds) and copying it on to a new layer but as you can see, some of the detail was lost and the edges are picking up some of the black background:

I'd try an image processing forum. This forum is typically for Java-specific issues and there might not be that many people who've done this here. Sorry I couldn't help. Have you read some image processing books?

Query parameter question

Hi
What are the diffrence of the query parameter in following format:
select * from table_a where row_id=?id
select * from table_a where row_id=:id
select * from table_a where row_id=&idThe 1st and 2nd works if I use them as named query from Java (Toplink)
The 2nd and the 3rd works when I use them from SQL developer. SQL developer will pop up parameter window. but the window looks diffrent with each parameter format.
What are the diffrences?
Thanks

>
select * from table_a where row_id=?idMust be a Java thing, not SQL or PL/SQL
select * from table_a where row_id=:idThis is a bindvariable
select * from table_a where row_id=&idThis is a substitution variable
Edited by: Alex Nuijten on Jun 17, 2009 5:33 PM
Edited by: Alex Nuijten on Jun 17, 2009 5:34 PM

BrowseTo Path Parameter Question

Similar Messages

Maybe you are looking for