BSI server RFC connection
I am trying to setup an RFC connection to BSI server. I looked up the SAP notes which said that I need to point my connection to a file called TF80SERVER.exe.
I downloaded the client/server files from the BSI website but it did not have this file(TF80SERVER.EXE). On contacting BSI support, they said a file ; 'TF8API.DLL' needs to be copied to the c:\windows\system\ folder. The RFC connection should point to this file.
I did exactly as directed. but I still get a communication failure with the message that the DLL file is not registered. I have hit a hard wall here because I cannot find any documentation to help me make it work. Please help.
You may want to check with BASIS people who load / set up BSI dbase on the server site. Depending on the OS of the appl server, BSI executable could have different name (e.g. for UNIX, it's tf80server) .
When configuring RFC connection, in technical setting tab, you need to key in the script to trigger BSI (e.g. /usr/sap/.../tf80server.ksh). In this script, it would define the dbase instance, library path, ... prior to actually executing
tf80server. This script is pre-delivered by SAP, and you just have to twig it to fit your need.
Rgds.
Similar Messages
-
RFC connection from SAP R/3 to OS400 server
Hi,
I am trying to establish an rfc connection between an R/3 system and OS400 server.
I dont have much experience on communication interfaces i have seen different options in SAPRFC.ini file but still i wanted to get some expert comments from the experts.
Please help me on this.
Thanks
Junaid.Hi,
We had the same scenario here also. You can call .NET code from ABAP program using SAP .Net connector.
The data can be downloaded to SQL server based on periodic job wise (every Half an hour or 1 Hour) .
1. Write an ABAP report to get new personnal numbers from HR master tables based on created date.
2. Create a RFC to pass employees details.
3. You can create a proxy in .NET server stub code based on the above RFC.
4. Write code to get data .NET object and establise a connection to SQL server.
5. Write code to push data into SQL server tables.
6. After you complete the .NET code, when you generate this code will create an exe file.
7. You have to execute that exe with few command line arguments.
8. The command line arguments need to setup in RFC destination (SM59).
9. In that ABAP report call this RFC with RFC destination as you defined.
.NET code can be done by .NET person.
Let me know if you have any clarifications.
Thanks & Regards,
Govind. -
RFC Connection Problem between Production Server & Solution Manager
Hi,
I want to make a RFC Connection between Production Server & Solution Manager.
But when go through Tcode- SM59 and click on Remote Logon from Production to connect Solution Manager it showing me a Client/Userid/Password window and when i connect go through Solution Manger to Production Server it connects normally. I already done the same process in both the clients, as i already mentioned Logon details in the Logon/Security tab but why it is showing me Client/Userid/Password pad when i am login through Production to SolMan?
+Tell me where the actual problem is! In my Solution Manager end or in my Production Server end +
I want to access Solution Manager from Production Server on just clicking once on Remote Logon from Tcode- SM59.
Thank you.
Edited by: varun@pcl on Jul 31, 2010 4:40 PMHi
Mention which Client u login and valid username and password from both PROD Server and Solman .
https://websmp201.sap-ag.de/support under Solman manager .
https://websmp201.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000633637&
Regards -
Can someone explain me in detail the steps that are necessary to setup a RFC connection from BI (NW 2004s SP11) to a SQL Server in the network? I need this to export data to the SQL Server using OpenHub's API.
All I know so far is that the magic has to happen somewhere in SM59, correct?
Thank you,
DennisThank you for the first pointers. I know that we could export to a flat file, but we would like to use the more powerful OpenHub API which needs a working RFC connection according to this thread:
Re: Open Hub Destination-Third Party Tool
In SM59, the connections are grouped by protocol. For SQL Server, would it be a TCP connection?
The "new connection" screen is pretty crowded. What other essential information do I have to maintain here?
Thank you,
Dennis -
RFC Connection From SAP to Iseries server
Hi,
I wish you can help me wtih this issue.
We are running ECC 6.0 on iseries v5r3m0.
We are trying to connect to an other non-SAP V5r1M0 system. We are using OSS note 146624 for this purpose.
Our first problem is that we cannot copy pgm files to a V5R1 system from V5R3 system. This can be solved with manual extraction kernel.
However our problem is that we are getting an "SQL Error 0" short dump when we start abap report. What ever the entry in DBCON table is we get this short dump.
Did anyone configured RFC connection to a non-SAP Iseries system? What methos should we use?
Best RegardsHello Volker,
it is some time ago, you posted the original message here. I have a follow on question and I hope you can help.
Apart from the redbook I can't find any documentation about rfc with iseries and that gives some examples but no real explanation about what you are supost to do
I followed the rfc example "ILE RPG evoked from ABAP" and I can get it to work, as long as I ask for only one parameter from the ABAP.
Do you know how to get multiple parameters from ABAP? Just repeating the RfcGetData with different parameters doesn't work. The ABAP will cancel with "no data to receive" on the second parameter.
Also do you know how to create a rfc-trace for these requests?
Best Regards.
Richard la Croix -
Hi Gurus,
I have a problem when i try to do a RFC connection Between SAP and Windows, this's the error message log Tx, sm59..
EntrSist. Error de conexión
Det.error / CPIC-CALL: 'ThSAPOCMINIT' : cmRc=17 thRc=236 SAP gateway connection failed. I
Det.error ERROR: SAP gateway connection failed. Is SAP gateway started?
Det.error LOCATION: SAP-Server devinc_ICT_02 on host devinc (wp 1)
Det.error COMPONENT: CPIC
Det.error COUNTER: 6
Det.error MODULO:
Det.error LINE:
Det.error CÓD.RETORNO: 236
Det.error SUBRC: 0
Det.error RELEASE: 700
Det.error TMP.: Tue Aug 31 11:13:57 2010
Det.error VERSIÓN:Anup,
the entry sapmsDEV is missing in your "services"-file on the computer that hosts your SLD-Server/J2EE WAS. Windows locates it at %WINDIR%/system32/drivers/etc, unix usually at /etc/.
make an entry like that:
sapmsDEV 3600/tcp (in case, your Systemnumber is 00, otherwise replace the "00" with your actual systemnumber)
kind rtegards, achim -
RFC connection Error in SLDCheck
Hi All,
I am trying to logon to Integration builder for that i getting the ESR builder address is not maintain. for this i have chk in SLDCheck t code ,there i am getting LCRSAPRFC connection error.I have test the RFC connection in that i am getting the
the error in register server program
Error Details ERROR: program LCRSAPRFC_XID not registered
now wht i have to do for troubleshooting
RegardsThanx for reply
when I test connection to Connection Test SLD_UC error
Logon Connection Error
Error Details Error when opening an RFC connection
Error Details ERROR: program SLD_UC not registered
Error Details LOCATION: SAP-Gateway on host sapdevpi / sapgw00
Error Details DETAIL: TP SLD_UC not registered
Error Details COMPONENT: SAP-Gateway
Error Details COUNTER: 62
Error Details MODULE: gwr3cpic.c
Error Details LINE: 1778
Error Details RETURN CODE: 679
Error Details SUBRC: 0
Error Details RELEASE: 701
Error Details TIME: Fri Jan 8 11:05:42 2010
Error Details VERSION: 2
RFC SLD_UC is connection T
Gateway Host sapdevpi
Gateway server sapgw00
same error with
Connection Test SLD_NUC
Connection Test SAPSLDAPI ( program Id SAPSLDAPI_DPI )
Connection Test SAPJ2EE
In Connection Test LCRSAPRFC error program id LCRSAPRFC_DPI
Logon Cancel
Error Details max no of 100 conversations exceeded / CPIC-CALL: 'ThSAPCMRCV' : cmRc=17 thRc=45
Error Details ERROR: max no of 100 conversations exceeded
Error Details LOCATION: CPIC (TCP/IP) on host sapdevpi
Error Details COMPONENT: CPIC (TCP/IP) with Unicode
Error Details COUNTER: 82
Error Details MODULE: r3cpic_mt.c
Error Details LINE: 10791
Error Details RETURN CODE: 466
Error Details SUBRC: 0
Error Details RELEASE: 701
Error Details TIME: Fri Jan 8 11:12:56 2010
Error Details VERSION: 3
Regards
shahid -
RFC Connection error in SM59 for SAP J2EE
Hi All,
i am getting the following error description while testing the connection for
SAP J2EE ...
Connection Test SAPJ2EE
Connection Type TCP/IP Connection
Logon Connection Error
Error Details Error when opening an RFC connection
Error Details ERROR: program sapfallback not registered
Error Details LOCATION: SAP-Gateway on host filip / sapgw00
Error Details DETAIL: TP sapfallback not registered
Error Details COMPONENT: SAP-Gateway
Error Details COUNTER: 1483
Error Details MODULE: gwr3cpic.c
Error Details LINE: 1694
Error Details RETURN CODE: 679
Error Details SUBRC: 0
Error Details RELEASE: 700
Error Details TIME: Tue Mar 31 02:44:35 2009
Error Details VERSION: 2
Help me resolve this
Regards,
Mahesh.Hi,
Please follow this steps:
Creating RFC Destinations in the ABAP and Java Environment
You need to create the following RFC destinations in transaction SM59 (ABAP) and the Visual Administrator (Java):
u2022 AI_RUNTIME_JCOSERVER
u2022 AI_DIRECTORY_JCOSERVER
u2022 LCRSAPRFC
u2022 SAPSLDAPI
Depending on your client settings, it may be necessary to be logged on your SAP Exchange Infrastructure host as SAP system user with the authorization to maintain customizing tables and to release transport orders. Note, that user "SAP*" or "DDIC" does not have these authorizations.
Maintaining the RFC Connections (Transaction SM59)
1. Log on to your SAP Exchange Infrastructure central instance host.
2. Call transaction SM59.
3. Choose Create.
4. Enter at least the following:
RFC destination: AI_RUNTIME_JCOSERVER
Connection type: T
Description: <your description>
5. Choose ENTER
6. Choose the tab Technical settings and do the following:
a. Select Registered Server Program
b. In the Program ID field, enter: AI_RUNTIME_<SID> where <SID> is the SAP system ID of your Integration Server host. Use uppercase letters only.
c. Enter Gateway host and Gateway service of your Integration Server host. To find out the required parameters:
a. On the Integration Server host, call transaction SMGW
b. Choose Goto u2192 Parameters u2192 Display (see entries for gateway hostname and gateway service)
7. Choose tab Special Options and select the flag Unicode in the box Character Width in Target System.
8. Save your settings.
9. Repeat the steps 3 u2013 8 for the remaining destinations:
Destination
Values
AI_DIRECTORY_JCOSERVER
Program ID: AI_DIRECTORY_<SID>, where <SID> is the SAP system ID of your SAP XI host
LCRSAPRFC
Program ID: LCRSAPRFC_<SID>, where <SID> is the SAP system ID of your SAP XI host.
SAPSLDAPI
Program ID: SAPSLDAPI_<SID>, where <SID> is the SAP system ID of your SAP XI host.
10. Leave the transaction SM59 open for later tests.
J2EE Configuration for the Destinations (Visual Administrator)
1. On your SAP Exchange Infrastructure central instance host, start the J2EE Engine administration tool.
2. Choose Cluster u2192 Server u2192 Services u2192 JCo RFC Provider
3. In the section RFC destination, enter exactly the same program ID and gateway options for AI_RUNTIME_JCOSERVER that you used in the step Maintaining the RFC connection above. Additionally, set the number of processes to 10.
4. In the section Repository, do the following:
a. Enter the parameter for the SAP XI host: Application Server, System Number, Client and Language.
b. For User and Password maintain the login parameters for the user SAPJSF.
c. Select the flag Unicode.
6. Choose Set.
7. Repeat the steps 3 u2013 6 for the remaining destinations:
Destination
Values
AI_DIRECTORY_JCOSERVER
u2022 Corresponding values from SM59
u2022 Number of processes: 10
LCRSAPRFC
u2022 Corresponding values from SM59
u2022 Number of processes: 3
SAPSLDAPI
u2022 Corresponding values from SM59
u2022 Number of processes: 3
Testing the RFC Destination
After you have maintained all RFC destinations in both the ABAP and Java environment, you can check all the connections above as follows:
1. Call transaction SM59 again.
2. Open your RFC destination.
3. Choose Test Connection. No error should be displayed.
This will solve your problem.
Thanks
Laxmi Bhushan -
RFC Connection error message while Debug the running WebDynpro app
Dear friends,
I am trying to debug WebDynpro application.
After configuring the NWDS with the J2EE server instance, I try to run the WebDynpro application, which I want to debug.
I did selecting the application and run after putting breakpoint at a button click.
But the webdynpro application uses 2 JCo destiantions, and so it gives JCOClientConnection for logical System: ... Please assure that you have configured the RFC connections and/or logical system name properly for this model! message.
If I run the same application from the portal, it doesn't give such error message.
Can anybody help me how can I run the WebDynpro application for debug purpose without getting this error message?
Thanks and regards,
LakshmikanthaiahHi,
are you running the application on the same server? Or are you using the Debugmode on your local installation.
If so, you should check the JCO Destinations on you local server.
<a href="http://localhost:50000/webdynpro/dispatcher/sap.com/tcwdtools/WebDynproConsole">http://localhost:50000/webdynpro/dispatcher/sap.com/tcwdtools/WebDynproConsole</a>
Regards,
Dennis -
RFC connection error when registering PROGRAM ID.
Hi,
I created a RFC connection of type T.
I gave the following parameters ->
gateway host: hostname and then ip-address
gateway service: sapgwxx
Registered program id: xxx
It is giving me the following error:
Error Details Error when opening an RFC connection
Error Details ERROR: program sapgwxx not registered
Error Details LOCATION: SAP-Gateway on host <hostname> / sapgwxx
Error Details DETAIL: TP sapgwxx not registered
Error Details COMPONENT: SAP-Gateway
Error Details COUNTER: 2696
Error Details MODULE: gwr3cpic.c
Error Details LINE: 1777
Error Details RETURN CODE: 679
Error Details SUBRC: 0
Error Details RELEASE: 700
Can anyone help me in troubleshooting the issue.
Also I am not able to register this program id in Visual Admin -> Services -> JCo RFC Provider. Here it is giving me an error. Can anyone guide me in this?
Points to be rewarded for any kind of small help.Thanks Ramesh.
I followed the blog. Here are the steps that I did.
RFC destination:
1. To create the RFC go to TCODE: SM59 <b>-> Done</b>2. Create new destination of type T (TCP/IP) <b>-> Done</b>
3. Make sure you select Registered Server Program option before writing your program ID <b>-> Done</b>
4. Write you program ID (remember it's case-sensitive) <b>-> gave the SID name</b>
5. In the gateway host and gateway service write the values of your "Application system" - business system (not the XI server) <b>-> Typed the gateway hostname and gateway service "sapgw<instance no>", that I got from SMGW.</b>
But still I face the same problem. It get the following error:
Logon Connection Error
Error Details Error when opening an RFC connection
Error Details ERROR: program <SID name> not registered
Error Details LOCATION: SAP-Gateway on host xxxxx / sapgwxx
Error Details DETAIL: TP <SID Name> not registered
Error Details COMPONENT: SAP-Gateway
Error Details COUNTER: 2719
Error Details MODULE: gwr3cpic.c
Error Details LINE: 1777
Error Details RETURN CODE: 679
Error Details SUBRC: 0
Error Details RELEASE: 700
Error Details TIME: Thu Nov 1 10:39:43 2007
Error Details VERSION: 2
Kindly help me out. -
RFC Connection error - Invalid length. Check parameters.
Hi Forum, Good Morning!
My ABAP Program will run in BACK Ground Job Processing(SM37) to download data to Presentation server( Local PC Directory). So I have created a RFC destination type TCP/IP to use 'RFC_REMOTE_FILE' function module in my ABAP Program.
When I am trying to test RFC connection It is giving following error.
ERROR Invalid length. Check parameters
LOCATION SAP- Server dsapp05_R3D_10 on host dsapp05 (wp 2)
COMPONENT CPIC
COUNTER 14
MODULE
LINE
RETURN CODE 240
SUBRC 0
RELEASE 640
TIME Mon Dec 11 10:08:05 2006
I did following procedure before I test RFC destination..
I have created RFC Destination : BJRFC
Technical Settings: Selected Registered Server Program radio button
Program ID: BJACCESS
Gateway host : 172.22.149.199
gateway Service: sapdp10
In my local machine Copied SAPRFC.INI file from the TEXT folder to the BIN Folder.
Then open the SAPRFC.INI file in BIN folder and Register a RFC server program at a SAP Gateway.
DEST=R3D_R
TYPE=R
PROGID=BJACCESS.rfcexec
GWHOST=172.22.149.199
GWSERV=sapdp10
RFC_TRACE=0
DEST=R3D_R
TYPE=R
PROGID=BJACCESS.trfcexec
GWHOST=172.22.149.199
GWSERV=sapdp10
RFC_TRACE=0
Then entered below command in dos prompt.
C:\Program Files\SAP\FrontEnd\SAPgui\rfcsdk\bin>rfcexec -aBJACCESS 172.22.149.199 xsapdp10.
so how do i proceed in this kind of case.
any help please.
Thanks in advance.Hi,
Just you check whether your program is registered or not.
If it is registered then you can find in SMGW transaction and go to
GOTO - Logged on clients
in that you will be able to see your program name if it registers succesfully.
you have typed rfcexec -aBJACCESS 172.22.149.199 xsapdp10
in this way.
In this you have misseg 'g' in front of your sap ip.
Thanks&Regards
Rajehs Balusu -
Error 'Program not registered' while testing RFC connection PI_RFC
Hi Basis Experts
I am having problems while testing an RFC connection PI_RFC in one of our PI quality system.
Here is the Error log
Logon Connection Error
Error when opening an RFC connection
ERROR: program PI_RFC not registered
LOCATION: SAP-Gateway on host bp1xeuaa202 / sapgw01
DETAIL: TP PI_RFC not registered
Details COMPONENT: SAP-Gateway
COUNTER: 15866
MODULE: gwr3cpic.c
Details RETURN CODE: 679
We tried restarting the JCO-RFC provider service in VA,also tried restarting the Gateway service, tried registering the RFC using below command
rfcexec u2013g PI_RFC -a bp1xeuaa202 -x sapgw01
rfcexec u2013D PI_RFC
the command didnt gave any output also in SMGW tcode we didnt get the entry(PI_RFC) under system type as registered server.
Also we tried changing the Gateway hostname and service name in SM59.
Still we are facing the same issue, can anyone please help us in resolving this issue.
Regards
SyedHi,
It seems to like problem with your program is not registered. As suggested by spantaleoni, you can go through.
Here Program Id must be case sensitive. Once again check with your program Id.
And, you have to register your program id in Visual Administrator.
Goto Visual Administrator:
In that Select Cluster>Server>Services-->JCo RFC Provider
Then enter the Program Id and gw host & service.
Hope this helps to you.
Regards,
P.Rajesh -
Problem with RFC connection - tp program not registered
Hello everyone
recently there has appeared a problem with the RFC connection on our system - we received the following set of messages:
Trace file opened at 20101221 130738 Central European Standard Time, SAP-RE
======> CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
Tp program is not registered.
ABAP Programm: RSRFCPIN (Transaction: SM59)
User: xxx(Client: 100)
Destination: SIDRFC_IFSAPHRCZPKCP (handle: 2, , )
Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1501
CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
Program transakcji nie jest zarejestrowany
DEST =SIDRFC_IFSAPHRCZPKCP
HOST =%%RFCSERVER%%
PROG =IFCZPKCP
GWHOST =ssapprod
GWSERV =sapgw21
I tried to register program with a command:
rfcexec -aIFCZPKCP -gssapprod -xsapgw21
but with no success - the program didn't appear on the list of logged clients on the system in gateway monitor. Frankly speaking we do not know now what else we can do - please help!
We have ECC 6.0 (SAP_BASIS 700 SP18) on Windows Server 2003 R2 x64.
Thanks in advance for any help.
Regards
PeterHi Salim
thanks for your reply.
./rfcexec -a(PROG_ID) -gssapprod -xsapgw21 &
The syntax you're providing refers to UNIX systems, but I did similar thing on our Windows system - I tried all of the following methods (unfortunatelly without success):
rfcexec -a(PROG_ID) -gssapprod -xsapgw21
full_path_to_rfcexec.exe -a(PROG_ID) -gssapprod -xsapgw21
rfcexec -a(PROG_ID) -gssapprod.domain -xsapgw21
full_path_to_rfcexec.exe -a(PROG_ID) -gssapprod.domain -xsapgw21
Can you advise me what to do now?
Thanks
Piotr -
RFC CONNECTION BETWEEN DS AND BW
Hi Experts,
I'm facing an issue Loading a BW Cube from Data Services because the RFC connection is lost frequently and to restore it we have to reboot the Data Services server in order to execute the loading job. We've already installed the fix pack 12.2.3 to DS but now we're are watching that strange behaviour.
Then when the data is loaded to the PSA its taking so much time to load this data to the CUBE, for 6 millions records it takes more than 24 hours, its really insane!
Do you know what could be wrong in our deployment????
Thanks and regards,
JulioHi, Carlo!
We were encountered the same problem in our project in the end of April. We wrote message to SAP, and still waiting when our customer provide access to supprot team for SAP system. -
Unable to open RFC connection - Err message
I all
I am trying to install SAP ERP 2004 SR1 on Microsoft Windows Server 2003, SQL Server 2000. I have successfully installed the Central Instance but when I try to install the Database instance after the database loading the following error is given:
FRF00007 - Unable to open RFC connection.
I have also tried to start the sap system. The message_server and igswd processed run ok, but the disp+work process is stopped.
I am also sending you the developer trace for this process.
Thank you a lot
Vasil
trc file: "dev_disp", trc level: 1, release: "640"
Mon Jul 27 11:24:48 2009
kernel runs with dp version 128000(ext=102000) (@(#) DPLIB-INT-VERSION-128000-UC)
length of sys_adm_ext is 524 bytes
systemid 560 (PC with Windows NT)
relno 6400
patchlevel 0
patchno 43
intno 20020600
make: multithreaded, Unicode
pid 2668
***LOG Q00=> DpSapEnvInit, DPStart (01 2668) [dpxxdisp.c 1100]
shared lib "dw_xml.dll" version 43 successfully loaded
shared lib "dw_xtc.dll" version 43 successfully loaded
shared lib "dw_stl.dll" version 43 successfully loaded
shared lib "dw_gui.dll" version 43 successfully loaded
Mon Jul 27 11:24:53 2009
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 3886]
MtxInit: -2 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: JAVA is not active
DpShMCreate: sizeof(wp_adm) 10528 (1316)
DpShMCreate: sizeof(tm_adm) 2780232 (13832)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpShMCreate: sizeof(comm_adm) 290000 (580)
DpShMCreate: sizeof(vmc_adm) 0 (372)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: SHM_DP_ADM_KEY (addr: 058C0040, size: 3192688)
DpShMCreate: allocated sys_adm at 058C0040
DpShMCreate: allocated wp_adm at 058C1B58
DpShMCreate: allocated tm_adm_list at 058C4478
DpShMCreate: allocated tm_adm at 058C44A0
DpShMCreate: allocated wp_ca_adm at 05B6B0E8
DpShMCreate: allocated appc_ca_adm at 05B70EA8
DpShMCreate: allocated comm_adm_list at 05B72DE8
DpShMCreate: allocated comm_adm at 05B72E00
DpShMCreate: allocated vmc_adm_list at 05BB9AD0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 05BB9AF8
DpShMCreate: allocated wall_adm at 05BB9B00
MBUF state OFF
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 1131 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 2.6.1 2.6 4.0) [dpxxdisp.c 1462]
***LOG Q0K=> DpMsAttach, mscon ( upayweb1) [dpxxdisp.c 9736]
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
Mon Jul 27 11:24:54 2009
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6400, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1025]
DpMsgAdmin: Set patchno for this platform to 43
Release check o.K.
Mon Jul 27 11:25:33 2009
ERROR => W0 (pid 3740) died [dpxxdisp.c 12187]
ERROR => W1 (pid 3748) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W2 (pid 3756) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W3 (pid 3764) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W4 (pid 3772) died [dpxxdisp.c 12187]
ERROR => W5 (pid 3780) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W6 (pid 3792) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W7 (pid 3800) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
killing W0-3740 (SIGUSR2)
ERROR => DpWpKill(3740, SIGUSR2) failed [dpxxtool.c 2468]
killing W1-3748 (SIGUSR2)
ERROR => DpWpKill(3748, SIGUSR2) failed [dpxxtool.c 2468]
killing W2-3756 (SIGUSR2)
ERROR => DpWpKill(3756, SIGUSR2) failed [dpxxtool.c 2468]
killing W3-3764 (SIGUSR2)
ERROR => DpWpKill(3764, SIGUSR2) failed [dpxxtool.c 2468]
killing W4-3772 (SIGUSR2)
ERROR => DpWpKill(3772, SIGUSR2) failed [dpxxtool.c 2468]
killing W5-3780 (SIGUSR2)
ERROR => DpWpKill(3780, SIGUSR2) failed [dpxxtool.c 2468]
killing W6-3792 (SIGUSR2)
ERROR => DpWpKill(3792, SIGUSR2) failed [dpxxtool.c 2468]
killing W7-3800 (SIGUSR2)
ERROR => DpWpKill(3800, SIGUSR2) failed [dpxxtool.c 2468]
NiWait: sleep (10000 msecs) ...
NiISelect: timeout 10000 ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jul 27 11:25:43 2009
NiISelect: TIMEOUT occured (10000 ms)
dump system status
Workprocess Table (long) Mon Jul 27 09:25:43 2009
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 3740 Ended no 1 0 0
1 DIA 3748 Ended no 1 0 0
2 UPD 3756 Ended no 1 0 0
3 ENQ 3764 Ended no 1 0 0
4 BTC 3772 Ended no 1 0 0
5 BTC 3780 Ended no 1 0 0
6 SPO 3792 Ended no 1 0 0
7 UP2 3800 Ended no 1 0 0
Dispatcher Queue Statistics Mon Jul 27 09:25:43 2009
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
3
2000
10
10
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 13
wake_evt_udp_now 0
wake events total 9, udp 8 ( 88%), shm 1 ( 11%)
since last update total 9, udp 8 ( 88%), shm 1 ( 11%)
Dump of tm_adm structure: Mon Jul 27 09:25:43 2009
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Mon Jul 27 09:25:43 2009
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000 msecs) ...
NiISelect: timeout 5000 ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jul 27 11:25:48 2009
NiISelect: TIMEOUT occured (5000 ms)
Shutdown server ...
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes...
Stop gateway
killing process (3724) (SOFT_KILL)
Stop icman
killing process (3732) (SOFT_KILL)
Terminate gui connections
[DpProcDied] Process lives (PID:3724 HANDLE:1592)
waiting for termination of gateway
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jul 27 11:25:49 2009
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process died (PID:3724 HANDLE:1592)
[DpProcDied] Process died (PID:3732 HANDLE:1584)
DpHalt: cancel all lcom connections
MPI CancelAll 2 -> 0
MPI DeleteAll 2 -> 0
NiIMyHostName: hostname = 'upayweb1'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 163 bytes
NiBufSend starting
NiIWrite: write 562, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 9962]
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiSelClear: removed hdl 3 from selectset
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/8
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 19)
MBUF component DOWN
NiBufClose: clear extensions for hdl 3
NiBufSetStat: bufstat of hdl 3 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 3 / socket 1596
MsIDetach: detach MS-system
EsCleanup ....
***LOG Q05=> DpHalt, DPStop ( 2668) [dpxxdisp.c 8495]
Good Bye .....Hi Juan <br>
I am sending you the log from dev_w0 <br>
<br>
Thank you a lot,<br>
Vasil
<br> <br>
<br>
<br>
trc file: "dev_w0", trc level: 1, release: "640"<br>
<br>
*<br>
ACTIVE TRACE LEVEL 1<br>
ACTIVE TRACE COMPONENTS all, M<br>
*<br>
B <br>
B Mon Jul 27 11:24:53 2009<br>
B create_con (con_name=R/3)<br>
B Loading DB library 'C:\usr\sap\UFT\SYS\exe\run\dbmssslib.dll' ...<br>
B Library 'C:\usr\sap\UFT\SYS\exe\run\dbmssslib.dll' loaded<br>
B Version of 'C:\usr\sap\UFT\SYS\exe\run\dbmssslib.dll' is "640.00", patchlevel (0.43)<br>
B New connection 0 created<br>
M systemid 560 (PC with Windows NT)<br>
M relno 6400<br>
M patchlevel 0<br>
M patchno 43<br>
M intno 20020600<br>
M make: multithreaded, Unicode<br>
M pid 3740<br>
M <br>
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 3740) [dpxxdisp.c 1160]<br>
I MtxInit: -2 0 0<br>
M DpSysAdmExtCreate: ABAP is active<br>
M DpSysAdmExtCreate: JAVA is not active<br>
M DpShMCreate: sizeof(wp_adm) 10528 (1316)<br>
M DpShMCreate: sizeof(tm_adm) 2780232 (13832)<br>
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)<br>
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)<br>
M DpShMCreate: sizeof(comm_adm) 290000 (580)<br>
M DpShMCreate: sizeof(vmc_adm) 0 (372)<br>
M DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)<br>
M DpShMCreate: SHM_DP_ADM_KEY (addr: 060C0040, size: 3192688)<br>
M DpShMCreate: allocated sys_adm at 060C0040<br>
M DpShMCreate: allocated wp_adm at 060C1B58<br>
M DpShMCreate: allocated tm_adm_list at 060C4478<br>
M DpShMCreate: allocated tm_adm at 060C44A0<br>
M DpShMCreate: allocated wp_ca_adm at 0636B0E8<br>
M DpShMCreate: allocated appc_ca_adm at 06370EA8<br>
M DpShMCreate: allocated comm_adm_list at 06372DE8<br>
M DpShMCreate: allocated comm_adm at 06372E00<br>
M DpShMCreate: allocated vmc_adm_list at 063B9AD0<br>
M DpShMCreate: system runs without vmc_adm<br>
M DpShMCreate: allocated ca_info at 063B9AF8<br>
M DpShMCreate: allocated wall_adm at 063B9B00<br>
X <br>
X Mon Jul 27 11:24:54 2009<br>
X EmInit: MmSetImplementation( 2 ).<br>
X <ES> client 0 initializing ....<br>
X Using implementation flat<br>
M <EsNT> Memory Reset disabled as NT default<br>
X ES initialized.<br>
M <br>
M Mon Jul 27 11:24:55 2009<br>
M calling db_connect ...<br>
C Thank You for using the SLOLEDB-interface<br>
C Using dynamic link library 'C:\usr\sap\UFT\SYS\exe\run\dbmssslib.dll'<br>
C dbmssslib.dll patch info<br>
C patchlevel 0<br>
C patchno 43<br>
C patchcomment View with literal containing (0x60) (786638)<br>
C np:(local) connection used on UPAYWEB1<br>
C Using Provider SQLNCLI<br>
C OpenOledbConnection: MARS property was set successfully.<br>
C Provider Release:9.00.1399.06<br>
C Using Provider SQLNCLI<br>
C OpenOledbConnection: MARS property was set successfully.<br>
C Cache sizes: header 68 bytes, 20000 names (31520000 bytes), 1000 dynamic statements (5672000 bytes), total 37192068 bytes<br>
C Using shared procedure name cache UPAYWEB1_UFTUFT_UFT_MEM initialized by another process.<br>
C Connected to db server : [UPAYWEB1] server_used : [np:(local)], dbname: UFT, dbuser: uft<br>
C pn_id:UPAYWEB1_UFTUFT_UFT<br>
C Not using MARS (on sql 8.0)<br>
B Connection 0 opened<br>
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost <br>
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20090727 112454 UPAYWEB1 <br>
C The IRow interface is supported by this OLEDB provider<br>
M db_connect o.k.<br>
I MtxInit: 0 0 0<br>
M SHM_PRES_BUF (addr: 0AD60040, size: 4400000)<br>
M SHM_ROLL_AREA (addr: 5EF60040, size: 160563200)<br>
M SHM_PAGING_AREA (addr: 0B1A0040, size: 72417280)<br>
M SHM_ROLL_ADM (addr: 0F6C0040, size: 1603610)<br>
M SHM_PAGING_ADM (addr: 0F850040, size: 525344)<br>
M ThCreateNoBuffer allocated 540152 bytes for 1000 entries at 0F8E0040<br>
M ThCreateNoBuffer index size: 3000 elems<br>
M ThCreateVBAdm allocated 12160 bytes (50 server) at 0F970040<br>
X EmInit: MmSetImplementation( 2 ).<br>
X <ES> client 0 initializing ....<br>
X Using implementation flat<br>
X ES initialized.<br>
C <br>
C Mon Jul 27 11:24:58 2009<br>
C The IRow interface is supported by this OLEDB provider<br>
B db_con_shm_ini: WP_ID = 0, WP_CNT = 8<br>
C Using Provider SQLNCLI<br>
C OpenOledbConnection: MARS property was set successfully.<br>
B dbtbxbuf: Buffer TABL (addr: 146900C8, size: 30000000, end: 1632C448)<br>
B dbtbxbuf: Profile: max_objects = 5000, displace = 1, reorg = 1<br>
B dbtbxbuf: request_unit = 2000, sync_reload = 5, inval_reload = 5<br>
B dbtbxbuf: protect_shm = 0, force_checks = 0<br>
B dbtbxbuf: tsize_retry = 14304000<br>
B ***LOG BB0=> buffer TABL started with length 30000000 bytes [dbtbxbuf#7 @ 15714] [dbtbxbuf1571 4]<br>
B dbtbxbuf: Buffer TABLP (addr: 163300C8, size: 10240000, end: 16CF40C8)<br>
B dbtbxbuf: Profile: max_objects = 500, displace = 1, reorg = 1<br>
B dbtbxbuf: request_unit = 2000, sync_reload = 5, inval_reload = 5<br>
B dbtbxbuf: protect_shm = 0, force_checks = 0<br>
B dbtbxbuf: tsize_retry = 5047296<br>
B ***LOG BB0=> buffer TABLP started with length 10240000 bytes [dbtbxbuf#7 @ 15714] [dbtbxbuf1571 4]<br>
B dbtbxbuf: Reading TBX statistics:<br>
B dbtbxbuf: Opening C:\usr\sap\UFT\DVEBMGS01\data\tbxnew failed (No such file or directory).<br>
B dbtbxbuf: Renaming C:\usr\sap\UFT\DVEBMGS01\data\tbxnew to C:\usr\sap\UFT\DVEBMGS01\data\tbxstat failed (No such file or directory).<br>
B dbtbxbuf: 0 object entries precreated<br>
C sloledb.cpp [ParamStmtExec,line 11888]: Error/Message: (err 8180, sev 0), Statement(s) could not be prepared.<br>
C Procname: [##Y3UPAYWEB1uft00000037400000000002112455]<br>
C sloledb.cpp [ParamStmtExec,line 11888]: Error/Message: (err 208, sev 16), Invalid object name 'DDLOG'.<br>
C Procname: [##Y3UPAYWEB1uft00000037400000000002112455]<br>
C ParamStmtExec failed. HR 80040e14 DBSL retcode 103. stmt: [SELECT MAX(SEQNUMBER) AS c FROM DDLOG ]<br>
C Conn_i:1 selection:1 singleton:1 flag_fupd:0 use_cursor:0 chksum: 112017<br>
C DbSlRead - Error 103 (dbcode 208) on open<br>
C DbSlRead - <##Y3UPAYWEB1uft00000037400000000002112455><br>
C DbSlRead - Error 103 (dbcode 208) on fetch<br>
C DbSlRead - <##Y3UPAYWEB1uft00000037400000000002112455><br>
B ***LOG BZY=> unexpected return code 103 calling SEL [dbsynseq#1 @ 255] [dbsynseq0255 ]<br>
B db_syinit failed<br>
M *** ERROR => ThCallHooks: event handler db_init for event CREATE_SHM failed [thxxtool3.c 252]<br>
M *** ERROR => ThIPCInit: hook failed [thxxhead.c 1901]<br>
M ***LOG R19=> tskh_init, ThIPCInit ( TSKH-IPC-000001) [thxxhead.c 1359]<br>
M in_ThErrHandle: 1<br>
M *** ERROR => tskh_init: ThIPCInit (step 1, th_errno 17, action 3, level 1) [thxxhead.c 9413]<br>
M <br>
M Info for wp 0<br>
M <br>
M stat = 4<br>
M reqtype = 1<br>
M act_reqtype = -1<br>
M rq_info = 0<br>
M tid = -1<br>
M mode = 255<br>
M len = -1<br>
M rq_id = 65535<br>
M rq_source = 255<br>
M last_tid = 0<br>
M last_mode = 0<br>
M int_checked_resource(RFC) = 0<br>
M ext_checked_resource(RFC) = 0<br>
M int_checked_resource(HTTP) = 0<br>
M ext_checked_resource(HTTP) = 0<br>
M report = > <<br>
M action = 0<br>
M tab_name = > <<br>
M <br>
M *****************************************************************************<br>
M *<br>
M * LOCATION SAP-Server upayweb1_UFT_01 on host upayweb1 (wp 0)<br>
M * ERROR tskh_init: ThIPCInit<br>
M *<br>
M * TIME Mon Jul 27 11:24:58 2009<br>
M * RELEASE 640<br>
M * COMPONENT Taskhandler<br>
M * VERSION 1<br>
M * RC 17<br>
M * MODULE thxxhead.c<br>
M * LINE 9589<br>
M * COUNTER 1<br>
M *<br>
M *****************************************************************************<br>
M <br>
M PfStatDisconnect: disconnect statistics<br>
M Entering TH_CALLHOOKS<br>
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP<br>
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 730]<br>
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 252]<br>
M Entering ThSetStatError<br>
M Entering ThReadDetachMode<br>
M call ThrShutDown (1)...<br>
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 3740) [dpnttool.c 357]<br>
Maybe you are looking for
-
I'm having a problem with log rotation. I have my authentication failures setup to log to /var/log/auth.messages in syslog.conf. Thats all been working well. However,the file was getting large so I decided to configure log roation. In my /etc/logadm.
-
Footnotes and notecalls in XML workflow for InDesign
I'm a french typesetter working on a project using XML workflow with a large number of footnotes. I have been searching for hours the right way to prepare the XML workflow so I would get all the notecalls and footnotes once the workflow imported in m
-
Php select using column Field names ?
Hello, I need some advice using this select usually I do this $query = "SELECT * FROM table WHERE title LIKE 'body'"; it works, is fast and no problems. But now I've a big table [id, ..., ...] and need to select just the row starting with body, so I
-
Spinning beach ball since I upgraded Mac OS to 10.6.4
I upgraded the OS for my MAC to 10.6.4 and now I frequently get a spinning beach ball. I never had this problem with previous versions of OS.
-
How do I get out of landscape?
Suddenly my Adobe Reader 11.0.06 on my MacBook Pro with a Brother MFC J5910DW is only printing in landscape. How do I get out of this?