BSP Application CRMD_BUS2000126

Hi,
We are running BSP application CRMD_BUS2000126 to create business activiteis and follow up in the IC Webclient. When we use the win client to create our business transaction and followup everything works fine. In the Web client we are able to create the initial transaction but when we try to create teh followup transaction we are brought back to the initial transaction and the process ends. Does anybody have any idea where in config our problem would be located?
thanks.
JB

Hello JB,
Sorry, somehow I thought that you were reffering IC Webclient.
I didn't know that transaction. For my past reading of the SDN foruns, I only heard of t-codes CRMC_BLUEPRINT
and CRMC_BLUEPRINT_C to configure People Centric Views.
However, I can advice you this: If you don't get an answer here, I don't you open a thread in 'CRM - People Centric User Interface' forum? Maybe there you'll find the help you need.
Good luck.
Kind regards.

Similar Messages

Error in using PERFORM in eventhandler in a BSP Application.

Hi All,
Can we use Subroutines in BSP applications?
If yes then please help me with syntax .
Best Regards,
Anubhav.
Edited by: Anubhav Jain on Dec 20, 2007 10:52 PM

You can call subroutine with below Synatx:
DATA: progname(20) TYPE C VALUE 'YTESTINCLUDE' .
PERFORM your_perform_name IN PROGRAM (progname) IF FOUND.
"where your_perform_name is the form within the include program YTESTINCLUDE[/code]
Raja T
Edited by: Raja Thangamani on Dec 20, 2007 4:58 PM

Error message in bsp application

hi
Im tamil selvan .....this is my first bsp application i created .. but i cant view the output..the default html code itself not executing... i copied the same code in text and saved in html its executing there... i dont know what is the issue..is any system files are missing...plz guide me im new to bsp....first what should i learn ... the below is the error i pasted...
Business Server Page (BSP) error
What happened?
Calling the BSP page was terminated due to an error.
SAP Note
The following error text was processed in the system:
Die URL enthält keine vollständige Domainangabe (isys-ecc statt isys-ecc.).
Exception Class CX_FQDN
Error Name
Program CX_FQDN=======================CP
Include CX_FQDN=======================CM002
ABAP Class CX_FQDN
Method CHECK
Line 10
Long text -
Error type: Exception
Your SAP Business Server Pages Team

Hi Tamil,
welcome to the SAP Community Network. You will find lots of great resources, tips, and examples here.
Of course to find them you have to look for them. You will find most people more than happy to help you with problems if you first try and help yourself by searching for the solution yourself.
So please, search the forums for the solution to your problem before you post.
Cheers
Graham Robbo

SSO via Windows authentication for a BSP application

Hi,
is it possible to configure/implement a bsp-application, so that the user of the application is authenticated in the SAP system through the windows user (without entering the user or password). I search for a mechanism, that is like the SSO mechanism in the SAP EP. We don't have SAP EP, neither we have a java stack installation.
Exists a way to implement this scenario?
My idea was it, to use the same functionality, like in the SAP GUI, when configuring SSO. Unfortunately I don't find any hints about this topic.
Regards,
Thomas

One best way is to embed the BSP page in the iview of the EP. As your are telling EP is not available i think there is no other way around.

Javascript error calling a bi 7.0 webapplication from a bsp application

Hi everyone,
This is the scenario we're facing a javascript error :
Enterprise Portal is calling a custom bsp application ( via an iview in the enterprise portal ) in the bi system with a parameter "template_id" and a value, which is the technical name of a bi web application.
The bsp application is evaluating the parameter by some custom code and creating a html page with a redirect or a maintenance message to the bi web application passed with the parameter "template_id".
The html link to the bi web application is created according to this documentation :
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/46/03d4ac801467e6e10000000a1553f6/content.htm
Purpose of the bsp application :
in the bi system there is a database table to maintain a flag for each webtemplate and infocube, which should not be called via the enterprise portal for a certain time ( some kind of maintenance switch ). The bsp application then decides to show a maintenance page for the called webtemplate or to send the redirect page to the client.
The process described above is :
working with the bi 7.01 sp7 in the bi ( enterprise portal sp22 ) in the productive system.
working in the Q&A system bi 7.01 sp8 with bi 3.5 web applications.
not working in the Q&A system bi 7.01 sp8 with bi 7.0 web applications.
The javascript error calling bi 7.0 web applications is :
Webpage error details
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Win64; x64; Trident/4.0; .NET CLR 2.0.50727; SLCC2; .NET4.0C; .NET4.0E)
Timestamp: Mon, 6 Jun 2011 09:11:04 UTC
Message: Object doesn't support this property or method
Line: 96
Char: 11
Code: 0
URI: https://mlptb1.mlp-ag.com:58001/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?TEMPLATE=B_221_002_KUNDEN_POSTEN_AD
We've opened a message. Support center is saying that this method isn't supported by sap. We should ommit the bsp application and the used functionality.
Is there any way to find out, what is causing this object is missing ?
Is there another way than a bsp application to use this custom maintenance function in the described system setup ?
system components :
production system
SAP NetWeaver 7.0 Portal SP22
SAP BI 7.01 SP 7
q&a system
SAP NetWeaver 7.0 Portal SP22
SAP BI 7.01 SP 8
Kind regards.
Dirk

Hello everyone,
we did some further analysis on this problem und we think we found the problem.
The error occurs while trying to execute the standard url for web templates inside a Enterprise Portal Frame, for example
https://XXX:XXX/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?TEMPLATE=XXX
While executing the URL a HTML-Page with some embeded Javascript-code is sent back to the browser.
In this Javascrip-Code, the method-call "dsmObj.registerAll" leads to a script error in Internet Explorer.
dsmObj.registerAll("pcd:portal_content/com.sap.pct/platform_add_ons/com.sap.ip.bi/iViews/com.sap.ip.bi.bex", "GUSID:6FC9SuhGDPIMMLwOdeHEIg--_7WQud13yeLJDz2kYoQFSg--", "1307605928212");
In SP7, the method "dsmObj.registerFullKey" is called instead of "dsmObj.registerAll". This has changed in SP8.
dsmObj.registerFullKey("GUSID:iBPvyska9*xE_JBalkQG2g--YyKv2C3NToP0I79Mw7EO8w--", "1307606479963");
The object "dsmObj" seems to reference the parent frame of the Enterprise Portal.
Has anyone seen this before? Any ideas how we can fix this?
Kind regards,
Matthias
Edited by: Matthias Keller on Jun 9, 2011 2:07 PM

Custom F4 help in a BSP application working in Mozilla but not in IE

Hi,
I have created a custom F4 help in a BSP application.
It is working in Mozilla but not in IE. I tried enabling javascript as well but still it is not working.
Can someone please suggest a possible solution for this?

Hi,
See simmilar discussion in thread /thread/1883519 [original link is broken]
I think this may be helpful for you.
Thanks,
Chandra

How to set up use of relative URLs for a BSP application

Dear all,
I need to access a BSP application through our external portal.
This is failing because generated URLs are absolute URLs (they mention physical server name, not known of course on the internet) where they should be relative URLs (they use external portal URL as prefix).
How to set this up?
I'm logged on http://myportal.com/irj/portal and want to call a BSP application. To build this page, my internet client (Internet Explorer) tries to get elements from the server. Looking at HTTP trace, I can see that my IE is trying to reach the physical server, not known on internet of course, then page loading fails.
Ex absolute URL : http://myservername.domain.com/sap/bw/[...]/image1.gif
This is the behavior I can see at the moment.
Relative URL : http://myportal.com/sap/bw/[...]/image1.gif
This is what I'd like to see.
Many thanks in advance for your help.
François

Any idea ?

How to pass date parameter from one page to other in BSP application

Hello gurus,
In my BSP application i have taken an input field and made its type "date" and its value also of type date and have set showhelp .
Now once a particular date is given as an input i want to pass its value to next page. And in next page i have to fire a query based on the date entered in previous page...
Now my prb is that my date value is not getting passed to the next page.
I have used
navigation->set_parameter( name = 'BEGDA' value = BEGDA ).
to pass date parameter.....still parameter is not getting passed.
plz help me with this.....
thankx.....

Hi Eddy,
By truncation i mean the entire date becomes 10 char including the ' . ' eg(06.12.2006).
so with begda being 8chars it takes my date as 06.12.200
as a result my query is not getting executed.
now i have tried to use a FM 'CONVERT_DATE_TO_INTERN_FORMAT'.
in my 1st page but still in 2nd page its giving me following error.
<b>The data that was read could not be written to the specified target field during a SELECT access. Either the conversion is not supported for the type of the target field, or the target field is too short to accept the value, or the data is not in the appropriateformat for the target field.
</b>
Regards
Swati

How to deal the timeout session in BSP application

Hello everybody,
inside a BSP application, I want to inform the user that he is near to reach the timeout of its session.
So I wonder how to know the lifetime of the session and how to calculate the time from its connection.
Anyone of you can help me on his topic?
Thanks in advance.

Starting point: <a href="/people/mark.finnern/blog/2003/09/24/bsp-in-depth-confusion-between-stateless-stateful-and-authentication">BSP In-Depth: Confusion between Stateless, Stateful and Authentication</a>
The trick will be to after each roundtrip set a JavaScript timer tied to a alert statement. The weblog gives you ideas of what values you want to look at.

How to get workitem ID parameter in BSP application in UWL?

Hello All,
okay, it's been a long day and i stuck with this seemingly simple problem - how to get a workitem id in my BSP application when calling from UWL.
Points are guaranteed to all who post an answer.
i got MVC BSP iview is configured to be called for my task in SWFVISU, all re-registered and seem fine. Correct BSP is being called when i execute the workitem from UWL, but wi_id is not passed there.
What am i missing?
Thanks!

Hi Serge
How you solved it .I have same issue please let me know.
Thanks

Getting value from portal or bsp application to selection screen parameter

Daer SDNer's.
                       Is there any possibility of getting value from bsp application and that value to be passed to selection paramater of bw query varaiable.
concept as follows.
                                report is based on vendor related information. particular vendor having user id in bsp or portal for accessing reports. if he selects bw query in portal or bsp dash board. that same vendor name or id shoukd be pass to default vendor selection entry in bi... so only that particular vendor details should display.....
Harikrishna

Dear Arun,
                  thanks for the reply. can i dynamically get the values to selection parmaters from bsp or else i need to mantain those user ids(vendor name) in bw. could you explain on it. if possible provide some sample code on it.
Thanks
Harikrishna N

How to create custom BSP application in SAP CRM?

Hi Experts,
I would like to seek help from you. I am new in developing CRM objects. My first requirement is to create a custom program that will generate a PDF report.
First thing I would like to know is the transaction code where I need to create a BSP application that will be able to run in crm webclient. Please clarify if it is in BSP_WD_CMPWB or in SE80 because it is said that I should create BSP application using MVC.
Second thing is how will I be able to call a smartforms in a BSP application. The scenario for my custom program would be, I should have a two input fields in the selection-screen which are Business Partner ID and Product Lines. together with a button that will trigger the form when ticked.
Hope to hear from all of you. Your help will be very much appreciated.
Thanks and Regards,
Monica

Hello MonicAnna,
You can find some information on this page.
(http://help.sap.com/saphelp_nw70/helpdata/en/59/cd7daa07d711d5b66f006094192fe3/content.htm)
And also you dont have to use se80 to create new Bsp appliaction. You can create new application by this transaction BSP_WD_CMPWB.
Zafer,
Edited by: Zafer Kuru on Dec 5, 2011 10:12 AM

How to create downloadable pdf report as hyperlink within BSP application

Hi,
I'm developing a BSP application using MVC and htmlb extensions on a WAS 6.40. One of the requirements of my webapplication is:
- the ability to generate a report in pdf format at runtime, using data retrieved from a backend SAP CRM 3.0 system
and
- make this report available/downloadable via a hyperlink in the application.
I am aware of tools like Smartforms and Adobe interactive forms but need some help to get started and choose the right tool.
regards, Roelof Jan

Hi,
we've done that by firstly building a RFC which prints the report to sap-spool:
call function 'GET_PRINT_PARAMETERS'
      exporting
        expiration     = 1
        immediately    = ' '
        new_list_id    = 'X'
        line_count     = 65
        line_size      = 132
        report         = sy-repid
        no_dialog      = 'X'
      importing
        out_parameters = wf_params
        valid          = valid_flag.
    if sy-subrc ne 0 or valid_flag eq false.
    endif.
    new-page no-heading no-title print on parameters wf_params
                      no dialog .
... list processing ...
new-page print off.
concatenate programname sy-uname+0(3) into lc_rq2name separated by '_'.
select * from tsp01 into tsp01_wa
                      where rq2name = lc_rq2name
                      and rqowner   = sy-uname
                      order by rqcretime descending.
    wf_spono = tsp01_wa-rqident.
    exit.
endselect.
if sy-subrc ne 0.
    clear wf_spono.
endif.
Then convert the spooljob:
call function 'CONVERT_ABAPSPOOLJOB_2_PDF'
    exporting
      src_spoolid              = wf_spono
      no_dialog                = 'X'
    tables
      pdf                      = witab
    exceptions
      err_no_abap_spooljob     = 1
      err_no_spooljob          = 2
      err_no_permission        = 3
      err_conv_not_possible    = 4
      err_bad_destdevice       = 5
      user_cancelled           = 6
      err_spoolerror           = 7
      err_temseerror           = 8
      err_btcjob_open_failed   = 8
      err_btcjob_submit_failed = 9
      err_btcjob_close_failed = 10
      others                   = 11.
if sy-subrc ne 0.
    return.
endif.
Delete Spooljob and generate cached response:
data del_spono type tsp01_sp0r-rqid_char.
del_spono = wf_spono.
call function 'RSPO_R_RDELETE_SPOOLREQ'
    exporting
      spoolid = del_spono.
if witab is not initial.
    loop at witab into itab .
      translate itab using ' ~'.
      concatenate output itab into output in character mode.
    endloop.
    translate output using '~ ' .
    create object cached_response
           type cl_http_response
           exporting add_c_msg = 1.
    l_pdf_len = strlen( output ).
    cached_response->set_cdata( data   = output
                                length = l_pdf_len ).
    cached_response->set_header_field( name = if_http_header_fields=>content_type
                                       value = 'application/pdf' ).
    cached_response->set_status( code = 200 reason = 'OK' ).
    cached_response->server_cache_expire_rel( expires_rel = 180 ).
    data: guid type guid_32,
          display_url type string.
    call function 'GUID_CREATE'
      importing
        ev_guid_32 = guid.
    concatenate runtime->application_url '/' guid '.pdf'
                into display_url.
    cl_http_server=>server_cache_upload( url      = display_url
                                         response = cached_response ).
    app ?= application.
    app->print_url = display_url.
endif .
The display_url has to be used in the normal response-view:
<script type="text/javascript">
var param = 'width=700'
      + ',height=550'
      + ',left=0'
      + ',top=0'
      + ',menubar=no'
      + ',location=no'
      + ',resizable=yes'
      + ',status=no';
window.open('<%= application->print_url%>', 'DRUCK', param ).focus();
</script>

Hiding fields in BSP application

Hi Friends,
Iam using HRRCF_TRM_srch BSP Application, i have a requirement to hide few fields in BSP pages. Can any one tell me what BADI and what BAPI is this BSP application is triggering at the behind. so that can will enhance the BADI or modify the BAPI, without modifying BSP page or controller.
Thanks in advance
Srikanth

Hi James,
Firstly, do you need to have the hidden items on the page? If you don't, you should just delete the items. If you do (perhaps because of the calculations you need for your second question - see below), you can set them to "Hidden" fields - select each item and set the Display As setting to Hidden.
Secondly, there are at least two ways to perform calculations on fields - either using a Page Process or a table Trigger. Page Processes will work on any fields available in the session and triggers will work on the fields on a table.
Which you choose typically depends on whether or not data is likely to be inserted or updated outside of your application.
Regards
Andy

BW Report execution from BSP application

Hi,
I am developing a web interface using BSP. One of the application in that is exposing BW reports in web through BSP. Using "How-To NetWeaver '04", I constructed the URL in the format -
http://<BW Server>:<Web AS port>/sapbw/bw/BEx?sap-language=EN&bsplanguage=EN&CMD=LDOC&TEMPLATE_ID=<Template>
This URL gives me the output and I am able to call this from my BSP application.
But while executing this report, I am getting popup to enter user id and password. In actual scenario, user will be logging in using one of the BSP application in R3and from there there will be a link to get this report. All my other application are in R/3 (like sales order / R3 reports) and only this report is from BW. What I did is I created a BSP application in BW and provided the report link there and I called this BW BSP application from R3 BSP application. In SICF for BSP application, I have provided my user id and password.
Everything works fine except for the popup box. This popup appears even if I try to execute directly in BW server. BSP Webpage in BW is appearing with out any issues(so my SICF for BSP is working fine) and once I click the link to my report, the popup is coming. Kindly suggest how to suppress it.
Note: I posted this in Portal Development also
Thanks,
Krish

I solved this by creating an Alias and also by changing the SICF for Mime object under BW.
Thanks,
Krish

BSP Application CRMD_BUS2000126

Similar Messages

Maybe you are looking for