BT's new prices from 9 May 2013
I see some prices are changing
(again)
43 PDF pages dated 09 May 2013 - http://www.productsandservices.bt.com/consumer/assets/downloads/BT_PhoneTariff_Residential.pdf
The above shows what's being dropped, how much products will be now and after 12 months (ie. BTSport (via TV) has a standard price of £12 pm (currently free) and from 11 August 2014 add an extra £3 pm for HD (again currently free)
-+-No longer a forum member-+-
Hi Jlamblejnr
Welcome to the Community Forum.
I am sorry to read of the experience you have had. If you can send us in an email using the contact us form in my profile (its in the section 'About Me') I can have this investigated for you.
Thanks
Stuart
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)
Similar Messages
-
Please help ! Where is my current icloud backup ?? It shows backed up on my old iphone but not on my new one. I updated my new iphone and it updated with an icloud backup from 12/3/2013 which restored a bunch of things that are no longer valid. How can i get the correct backup restored to my new iphone ??
Hello Shelly700,
The following article provides details and troubleshooting steps that can help get your iPhone to reappear in iTunes.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
Allen -
How to avoid user from entering new price condition in return order
Dear Expert
We are facing a scenario where we make return order; the Price is copied from the invoice. And it is working perfectly. The system does not allow us to change the price.
The issue we are facing here is that user can input new condition like discount /premium and change the net value for the return order pricing, and this will reflect in the credit note for returns.
Is there a way to restrict the user from entering any pricing condition in the header or item conditions tab.
although we cannot change the original price coming from invoice referenced for return order, but the user can input new price conditions as below. This must not be allowed.
The price must come according to the Qty being referenced.
While making the credit for returns, the user has a chance of further making changes to the net value by adding new conditions. Hence this must also be restricted for any changes.
Thanks
Edited by: Lakshmipathi on Jan 31, 2012 6:55 PM
Thread Locked - Reason Cross Postokie .... i will tell briefly what is the problem ....
Take a scenario wherein a user has logged into my application and he is performing a task which will put his user id and his employee id into the session. Then he opens another window by using either ctrl+n or through files->new window.
So now a new browser will open but the session will be same ..... in this newly opened browser, user performs some operation which will remove the user id and employee id from the session .... Now if he again comes back to the first window and tries to do some operation, then a null pointer exception will be thrown saying that the employee id is null .... because he has deleted that in the newly created browser ..... to avoid this situation what can we do ???? can you please help me in this regard ??? you got my problem right !!! -
Import contacts from old outlook 2013 to new Outlook 2013
I recently had to get a new computer. I removed the boot drive from the old computer and installed it as drive F on the new computer. This worked great in recovering my large data files. However, drive F contains an instance of Outlook 2013
as does drive C. How do I copy to or import drive F's contact info to the new Outlook 2013 contacts? I do not need the old email messages as I already have gotten them from the email service provider.Hi
As per the information and details provided by you, to import contacts from old Outlook 2013 to the new Outlook 2013 please follow these steps: -
Collect Files from the Old Computer
First, you need the PST from your old computer. In most cases, they will be in the default location Outlook uses. To quickly access the default PST location outside of
Outlook, paste this line in Windows Explorer’s address bar:
%USERPROFILE%\Local Settings\Application Data\Microsoft\Outlook
Copy the Files to the New Computer
Now, you will copy the PSTs to the new computer. If you have several PSTs in the folder and are not sure which one is the one with your data, look at the file dates and
file sizes. If you have 265KB PST files, they are empty and don’t need to be moved.
Paste the following line into the address bar.
%USERPROFILE%\Application Data\Microsoft\Outlook
In this folder you will have the NK2, SRS, XML, outlprnt, and VBA project files.
Open the AppData Roaming folder using the following command and copy the NK2 file to the folder.
%APPDATA%\Microsoft\Outlook
Create a Profile
After the PST file is on the local drive, type mail in the start search field on the
Start menu or go to Control Panel, Mail then opens the profile dialog. (If you use the
Category view, mail is under the Users group; in Win 64-bit, Mail is under 32-bit application.
Click the Show Profile button.
Click Add to create a new profile.
Enter a descriptive name for your profile.
Enter the name you want to use for your display name, your email address, and your password.
Add Your Existing Data File (PST) to the Profile
If you have an Outlook data file PST, and you want to use with your new profile, then please follow these steps: -
Select the newly created profile, then click Properties.
Click Data files button to open Account Setting dialog to the Data files tab.
Click Add then browse to your existing PST file.
If the PST is a native Outlook 2003/2007 file type, choose the top entry for the Outlook Personal File. Click Ok.
Select your existing PST file.
You can enter a friendly name or just click OK to return the Account Settings dialog.
Click the Sets as Default button. Select the PST Outlook created when it created the profile and click Remove. If you want, click Open folder to find and deletes this PST.
I hope this information will be helpful for you.
Thanks and regards
Shweta@G -
i07 upgrade and I lost my notes on my ipad... from May 2013 to present... I tried a system restore/back up.. but it didnt work..
Hello bkrook6319,
After restoring your device, you can access your purchased content including Apps and songs by follow this article. It will guide through the process of getting access to the content purchased with your Apple ID:
Download past purchases
http://support.apple.com/kb/ht2519
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD -
I bought 2 ebooks from Ebay in 2013 and already read it with ADE, but now I got a new PC, downloaded ADE again and am now not able to open the two acsm-ebooks any more
Use the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps. -
New Macbook Pro bought December 2013. T
ransferred everything from Timemachine backup from Macbook Air with 10.6.8.
Failed to transfer "network settings".
PROBLEM: the two accounts from the Macbook Air cannot log in. It shakes and refuses (the correct) password.
Cannot redo the setup.
Stuck! (With a dead as a doorknob $3000 machine.)
Help!!New Macbook Pro bought December 2013. T
ransferred everything from Timemachine backup from Macbook Air with 10.6.8.
Failed to transfer "network settings".
PROBLEM: the two accounts from the Macbook Air cannot log in. It shakes and refuses (the correct) password.
Cannot redo the setup.
Stuck! (With a dead as a doorknob $3000 machine.)
Help!! -
I recently installed an Airport Extreme 802.11N that I bought in May 2013. It replaced an Airport Extreme 802.11N that I bought in July 2007. My USB printer (Lexmark E350d) worked fine with the old Airport, but I'm having trouble with the new one. When I try to print, I get a USB Waiting message on the printer, and when I force a page to print by pressing Go on the printer, I get a page that says ERROR: syntaxerror OFFENDING COMMAND: true. . . .cvt . . . fpgm . . . x . . .lglyf . . . <..J head . . . STACK: / [ -mark- /sfnts I’ve tried shutting down the printer and disconnecting it and the Airport, but that doesn’t help. I reset the settings on the printer. I upgraded the Airport firmware and removed, reinstalled, and upgraded the Lexmark printer driver. After I upgraded the firmware and printer driver, a few pages printed correctly, but then I got the same syntax error page as before. Any suggestions for getting the printer to work correctly?
Use a powered USB hub between the AE and the printer.. the usb port does sometimes have issues.
Try deleting the printer in the Mac and reinstall it.. the change in AE can represent effectively a change of printer.. it is important to make sure that is all up to date.
Beyond that.. USB printers.. ughhh! Consider for two toners you can go and buy a proper network printer. -
Trying to download new Garmin map which may take a few hours and Firefox times out after only a small portion has been downloaded, unless I sit here and move the mouse occasionally. Can we stop Firefox from timing out? edit
Quote from: lcwhitlock on 04-April-14, 13:44:09
Hello darkhawk,
Thank you for the recommendation. I somewhat understand what a MS DOS disk is, but I'm not sure how to go about creating one. I've seen where you can use a program, like Rufus, to create a usb one - but I'm leery about using 3rd-party programs (especially ones I'm not familiar with). I've come across a couple of 'how-to' tuts, but they didn't clarify what files (if any) I would need to include on the disk (for my particular situation). Right now I don't have any blank cds, nor any extra flash/thumb drives - wish I did, but hadn't needed these for years. There has only been one other time where I needed to re-install Windows, but that was over 15 years ago - I did it through BIOS, reformatting my drives, and then reinstalled via the Windows XP disk. Windows 8 is an entirely different breed, which has left me feeling a bit stumped, at times. If there was a way I could perform it (successfully), similar to the first time I did it years ago, I'd give it a try - but at the same time, I'm a bit reluctant, because if it doesn't work, then I'm stuck without any internet access to get further help.
Ask and ye shall receive. This should be doable in Windows 7 and Windows 8 on another PC. I recommend using a USB Flash drive like in this tutorial, but I'm sure you could use something else.
If you want, you could also use Hiren's BootCD to make a bootable CD with many options and programs on it (I keep one, just for certain situations) that will allow you to do the same things.
http://www.hiren.info/pages/bootcd
Also very useful for sorting out virus's as long as it's downloaded and made on another PC that is virus free...... -
I am trying to unistall dynamic-pricer from my computer
I need help unistalling dynamic-pricer from my computer. It keeps popping up every time I open up a new tab/window?
You may have installed the "Downlite" or "VSearch" ad-injection malware. Follow the instructions on this Apple Support page to remove it.
Back up all data before making any changes.
Besides the files listed in the support article, you may also need to remove this item in the same way:
~/Library/Internet Plug-Ins/ConduitNPAPIPlugin.plugin
One of the steps in the article is to remove malicious Safari extensions. Do the equivalent in the Chrome and Firefox browsers, if you use either of those. If Safari crashes on launch, skip that step and come back to it after you've done everything else.
If you don't find any of the files or extensions listed, or if removing them doesn't stop the ad injection, then you may have one of the other kinds of adware covered by the support article. Follow the rest of the instructions in the article.
The problem may have started when you downloaded and ran an application called "MPlayerX." That's the name of a legitimate free movie player, but the name is also used fraudulently to distribute VSearch. If there is an item with that name in the Applications folder, delete it, and if you wish, replace it with the genuine article from mplayerx.org.
This malware is often found on illegal websites that traffic in pirated content such as movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow. Never install any software that you downloaded from a bittorrent, or that was downloaded by someone else from an unknown source.
In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
Still in System Preferences, open the App Store or Software Update pane and check the box marked
Install system data files and security updates
if it's not already checked. -
May 2013 patches : "novcifs --add --vserver" makes comatose
After applying "May 2013 Scheduled Maintenance for OES2SP3 8566" on OES2 SP3, old cluster volumes go comatose.
If I remove the "novcifs --add --vserver", old cluster volumes go online properly, but clients can only connect by IP address (not anymore with host name).
Before the patches, I needed a "sleep" to wait until "novcifs -sl" lists the volume, otherwise resource goes comatose.
Cifs Log :
WARNING: CODIR: AllocateDirCacheEntry: Invalid Patth /media/nss/ETU/
ERROR: CODIR: GetEntryFromDirCache: Failed to allocate a dir cache entry
WARNING: CODIR: Failed to find cache entry for given path.
ERROR: ENTRY: CIFSNDSReadFromNDS: Error adding a new share (CIFSNDSPutSharePointInfo): -1
CRITICAL: CLI: AddServer: CIFSNDSReadFromNDS(): Unable to read attributes of ".cn=CL_ETU_SERVER.o=hec.t=HEC_TREE." from NDS, error = -1
The "dir cache entry" does not seem to be the culprit, because on the same server an old cluster volume goes comatose and a new cluster volume goes online properly.
This error does not occur with new nss cluster volumes, created under Netware OES.
What I call "old cluster volumes", are volume created long time ago (Netware 3 or 4), not clustered at that time.
By comparing object attributes of the cluster volume server object (CL_..._SERVER) of old (ie "ETU" volume name) and new (ie "ADM" volume name), I notice these differences :
- nfapCIFSShares :
->ETU : 'ETU:\' 'ETU' 0 'ETU'
->ADM : 'ADM' 'ADM' 0 'NSS Volume'
- ACL :
->ETU : has no "[root] - nfapCIFSServerName - 3"
->ADM has the root compare and read rights on nfapCIFSServerName attribute.
How to add [root] trustee to make a try ?
Has anyone experienced such issue ?
Best regards.I have found how to correct, but I do not understand how the value got corrupted.
I corrected nfapCIFSShares attribute of CL_ETU_SERVER object with the following value (according to the ADM working properly) : 'ETU' 'ETU' 0 'NSS Volume'. -
I'm trying to upgrade my iCloud storage for the new price.
I'm trying to upgrade my iCloud storage for the new price, but it doesn't gives me the option of 20G for $0.99 a month.
How can I get 20g for $0.99 a month?
Thanks!Katherine,
have you read the message in the panel? Something is wrong with your credit card. Perhaps you have to enter a new date of expiration.
In the small print it says, there is still a purchase, that needs paying,"Ugly Heart" with an amount of R 9.99. And "We were unable to authorise your credit card for this purchase". You will first have to update your Billing Information before you can proceed to make a new purchase for upgraded storage. Click "Account Details" in the iCloud panel.
-- Léonie
If you cannot fix the account from the iCloud panel, open iTunes and sign into the "Store" menu, Then use the "Store > View account" item there to check for problems with your Billing Information. -
Transfer cost price from free of charge item to main item but not for VPRS
Hi,
I want to transfer cost price from free of charge item to main item but not for VPRS but for a new Z contidion type.
For CO-PA proposes. Can you help me with This?
Catarina Alveshi,
transfer of cost from sub item to main item is configured in the delivery to billing copy control for the main item. go to VTFL > select the required item cateogry > here at the bottom you will find a check box Cummulate cost. Tick it.
Not really what you meant COPA purposes. But the pricing conditions are mapped to COPA value fields at KE4I transaction.
regards
sadhu kishore -
New Project From MS Powerpoint
Hi,
I've just installed and licensed Captivate 7. I am having problems using the New Project from MSPowerpoint or the Insert / Powerpoint Slide option for a Blank Project. I have tried this with both .ppt and .pptx files which I can open and save in Powerpoint 2007.
When I try to create a New Project from MSPowerpoint Captivate tells me it is parsing the file, then it converts the slides (only 2 slides in the presentation), and then it freezes, and does nothing and I have to close the application down from Task Manager. Creating a new project and then using the Insert / Powerpoint Slide option also freezes. I have tried this with more than one Powerpoint presentation. I have also tried this with 'Run the program as an Administrator' set.
I have also installed the 7.01 update, and uninstalled and reinstalled Captivate to check my installation.
Has anyone got any ideas as to how to get Captivate to import slides from Powerpoint?
Thanks for your help.http://blogs.adobe.com/captivate/2013/11/announce-adobe-captivate-7-0-1-update-with-suppor t-for-os-x-mavericks-now-available.html
Refreshing/deleting the Preferences folder is not mentioned, but that recommendation can be found in a lot of threads in this forum. Clearing cache regularly is another good practice, not with the files you are actively working on (they provide means to recover a file, besides backup that is by default not checked in Preferences).
When importing PPT did you check High Fidelity option?
Lilybiri -
It happens whenever I open new tab from any wabpage. Once the tab is opened and initial webpage is loaded I may use any link to jump on another, second webpage in same tab. However, if I want to go back on initial webpage I can't do it cause that option (arrow) is disabled. I could use link on second webpage to jump on third, and only at that moment go back option becomes available again. However, I could not ever go back on initial webpage any more. As initial webpage has never existed.
It happens quite often (95%).Right click the Back button and select the page you want to go back to from the list.
If the list is too long to display via the Back button, hit CTRL+H, change the view to "Last Visited" and then load it from there instead.
Maybe you are looking for
-
I just downloaded some loops, but how can I add em to garage band? thanks
-
How to Configure MS Office Comminication Server 2007 with WebCenter Spaces?
Hello All, Has anyone successfully configured MS Office Comminication Server(OCS 2007) with WebCenter 11g Spaces? I have installed the RTCServices on the MS OCS server, and wll the services and wsdls are accessible. The IM is working with MS Communic
-
ABAP Developer want to take SD or MM certification
Dear All, Am SAP developer with 7yrs of experience in various implementation, support projects focusing mainly on logistics. Now I would like to take SD or MM certification, I have worked majorly on both modules and know almost equally both. I would
-
What is "use SSL" and "S/MIME" mail settings for?
What is "use SSL" and "S/MIME" mail settings for?
-
Premiere Elements 11 "stops working" on first run
When I run Premiere Elements the first time it comes up with the message "Premiere Elements 11 has stopped working". On starting the second time, it starts ok until the system is booted again. This is from the Event log - Log Name: Application