BTS 2010: SQL Adapter Class not registered
Hi,
after adding a host instance to the SQL Adapter, we receive every time a Class not registered error. The host instance is 32-bit and default for the SQL Adapter.
Any ideas or is anyone facing the same issue?
KR
Peter
I would suggest to refer the post below before repairing.
The
error threshold has been exceeded. The receive location is shutting down
Looks like a mismatch between 32 bit calls executing in 64 bit host, confirm that your host is indeed a 32 bit host.
Try to check below things
1) check the account have access in db
2) Check the BizTalk server build configuration, what is Platform target (Any CPU/ 32 Bit/ 64 bit) ?
3) Try for another 32 bit Host Instance which have both receive and send handler (like 32 bit BizTalkServerApplication default host instance)
4) check installed adapter pac bit version.
Rachit
Please mark as answer or vote as helpful if my reply does
Similar Messages
-
Class Not Registered error upon using MS Office Report
Hello,
Using LabVIEW 2010, I've just installed the Microsoft RGT trial from NI, along with the Office 2010 trial from Microsoft. Upon trying to drag the MS Office Report VI to my block diagram, the configuration dialog appears but immediately an error dialog shows up over top, with a Class Not Registered error. Attached is the screenshot. If I close the error and try to configure the VI for a basic Excel report, I get a file-not-found error in reference to the Excel template, which I have verified is indeed at the target path and opens with my version of Excel just fine. Any ideas how to get past this error?
Attachments:
error.JPG 42 KBHello,
It sounds like you have to reinstall the RGT. Have a look at this documentation.
http://digital.ni.com/public.nsf/allkb/B7F980D169474D568625760E0055D55E
Eric
Eric Liauw
AE Specialist - Automated Test | CLD | CTD
National Instruments -
Class Not Registered error when opening COM+ Applications folder
Hi,
This question was originally posted in the Microsoft Community / Win 7 forum, but I was asked to post it here.
As you can see below, I'm getting Error Code 80040154 - Class Not Registered when clicking on COM+ in Component services.
...picture 1 coming / Account verification
I took a look at the event logs but couldn't glean much information from them.
I also have issues associated with MSInstallVSSProvider when Uninstalling / Installing Norton Ghost 15. Not sure if they are related or not.
Below are the errors I get when Installing Norton Ghost 15. This app had been loaded on the PC earlier with no problems whatsoever. A few months later when launching the app, I got several error messages. Couldn't resolve them so I thought I would uninstall
/ reinstall. That's when I started seeing the MSInstall errors, which lead me to the Component Services area.
...picture 2 coming
...picture 3 coming
...picture 3 coming
I suspect a registry cleaner (GlarySoft) is the culprit here. My mistake was not backing up the registry before running the scan. This won't happen again.
Thanks,
TracyHi,
In the event error, can you read what {GUID} encounters the error message? Please also let us know the full error message.
Based on my search, this issue can be caused by the incorrect registry permission settings.
Please launch Registry Editor and navigate to HKEY_CLASSES_ROOT\CLSID\{GUID} to verify the permission settings.
If it does not work, you may run Process Monitor to check what process encounters this error.
Process Monitor v3.05
http://technet.microsoft.com/en-us/sysinternals/bb896645.aspx
Here is the related blog for your reference:
How to troubleshoot the “Red Arrow” issue in Component Services ( I )
http://blogs.msdn.com/b/asiatech/archive/2010/02/22/how-to-troubleshoot-the-red-arrow-issue-in-component-services.aspx
Kate Li
TechNet Community Support -
BizTalk 2010 SQL adapter connection to SQL2014.
I tried to connect BizTalk 2010 SQL adapter connection to SQL2014. The adapter found the database but the test connection said it would not connect.
Can this be done?
Kent Wallace
HMA BizTalk developer
HI Kent Wallace,
For this question, here is relevant discussion about BizTalk with SQL Server 2014, our community members' replies give good explanation about it.
Reference:
http://social.msdn.microsoft.com/Forums/en-US/f7916b02-795f-4954-b65c-2579cd623c96/biztalk-2013-and-sql-server-2014?forum=biztalkgeneral
hope it helps
Regards
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
ComErrorException class not registered
I have set up a merge replication as follows.
Publisher and subscribers are mssql 2008 servers. It is possible to replicate via RMO from a Client Application. This works fine if there is an sqlserver 2008 installed on the client. If not we get the following exception:
Exception-Type: Microsoft.SqlServer.Replication.ComErrorException
class not registered
at Microsoft.SqlServer.Replication.MergeSynchronizationAgent..ctor()
at Microsoft.SqlServer.Replication.MergePullSubscription.get_SynchronizationAgent()
On the client we installed the sqlserver Native client tools. In detail we installed:
SQLSysClrTypes.msi
SharedManagementObjects.msi
sqlcln.msi
sql_rmo.msi
sqlncli.msi
The Sqlserver-Dlls
Microsoft.SqlServer.Replication.dll
Microsoft.SqlServer.Rmo.dll
Microsoft.SqlServer.ConnectionInfo.dll
which are explicitly references in our source code are in the same directory as the .EXE-File
Any help greatly appreciated
Thanks RolfHi !
I have the same error
class not registered
at Microsoft.SqlServer.Replication.MergeSynchronizationAgent..ctor()
at Microsoft.SqlServer.Replication.MergePullSubscription.get_SynchronizationAgent()
But setup is a bit different .. I have written a program to replicate using SMO v100 via, VS 2008 SQL Database Edition. and I have SQL 2008.
It works fine in dev.
Our on site client machines have SQL 2005 sp3 installed ... initially nothing worked but after much reading of this forum I discovered that I had to install (on site)
SQLSysClrTypes.msi
SharedManagementObjects.msi
sqlcln.msi
sql_rmo.msi
sqlncli.msi
as well as the dlls that Detected Dependencies for the installer installs.
The app now ran and Users happily Published a DB & Created a Subscription BUT when they try to use
MergePullSubscription.SynchronizationAgent via the code
var agent = sub.SynchronizationAgent;
We get the "class not registered" crash ... which is not at all helpful as an error message ...
I've tried the registering of
SqlMergeX.dll
SqlDistX.dll
That existed in the SQL 2005 COM folder (v 2005.90.4035.0) ... still crashes ...
Anyone else had this ? Does any one have an answer ? -
Class not registered com win32
hi i´m having this error when i´m trying to convert a pdf in to a jpeg file i can´t find any solution can someone help me:
18:40:56,853 ERROR [STDERR] com.jniwrapper.win32.com.ComException: COM object me
thod returns error code: 0x80040154; Class not registered
this its the part of my code..
String xmlconfg = gen.getPDFExportXML("JPEG", 20, null);
File dataFile = new File("C:\\ErroresInst_LifeCycle.pdf");
String userData = "JobSourceIdentification";
String userQueue = "TestOutType";
Document idpDoc = new Document(dataFile, false);
idpDoc.setMaxInlineSize(1024 * 1024);
idpDoc.passivate();
AESAPIResults apiResults = gen.submitJob("EJB Test Client ", idpDoc, dataFile.getName(), xmlconfg,null, APIConstants.DEFAULT_JOB_PRIORITY, null, null, "en_US", null);
String jobId = apiResults.jobID;
best regards...Hi,
In the event error, can you read what {GUID} encounters the error message? Please also let us know the full error message.
Based on my search, this issue can be caused by the incorrect registry permission settings.
Please launch Registry Editor and navigate to HKEY_CLASSES_ROOT\CLSID\{GUID} to verify the permission settings.
If it does not work, you may run Process Monitor to check what process encounters this error.
Process Monitor v3.05
http://technet.microsoft.com/en-us/sysinternals/bb896645.aspx
Here is the related blog for your reference:
How to troubleshoot the “Red Arrow” issue in Component Services ( I )
http://blogs.msdn.com/b/asiatech/archive/2010/02/22/how-to-troubleshoot-the-red-arrow-issue-in-component-services.aspx
Kate Li
TechNet Community Support -
Class not registered message opening project
I have re-installed Macromedia HomeSite 5 using my serial
key. I have also copied from my old to new lap top a folder with my
projects and all the .html files. When I now use on my new lap top
the Homesite 5 and take the Project - Open option I am shown a
message "Class not registered". Any ideas?
I saw this on the forum earlier from 2005 but the 2 links are
no longer available.Hi,
In the event error, can you read what {GUID} encounters the error message? Please also let us know the full error message.
Based on my search, this issue can be caused by the incorrect registry permission settings.
Please launch Registry Editor and navigate to HKEY_CLASSES_ROOT\CLSID\{GUID} to verify the permission settings.
If it does not work, you may run Process Monitor to check what process encounters this error.
Process Monitor v3.05
http://technet.microsoft.com/en-us/sysinternals/bb896645.aspx
Here is the related blog for your reference:
How to troubleshoot the “Red Arrow” issue in Component Services ( I )
http://blogs.msdn.com/b/asiatech/archive/2010/02/22/how-to-troubleshoot-the-red-arrow-issue-in-component-services.aspx
Kate Li
TechNet Community Support -
Class not registered - CrystalPrintControl - havent seen an answer
Hello,
I'm still working on my issue from this thread Printing Issue - Visual Studio 2008 with Crystal Reports Basic
I want to thank Ludek for starting me on the right track.
I've since updated the project to a .NET 4.0 project using Visual Studio 2010. I've installed the SP1 for VS2010 and installed Crystal Reports 2010 for VS 2010 as well as the Service Pack for that. I'm not running Crystal Version 13.0.1.220
I've rewritten the print code to use RAS, that is the PrintOutputController.PrintReport method.
The change prints on my development machine - although I have not yet gotten to test whether it actually prints to the default tray of the printer setup, which was my original problem.
The issue now - moving to the client's server, is that I receive the Class not registered error mentioned in the following threads.
Re: Class not registered - CrystalPrintControl
Class not registered - CrystalPrintControl
ReportApplicationServer does not register properly using 32-bit runtime?
Problem with Crystal Reports for Visual Studio 2010 Production Redist 32 b.
CrystalPrintControl not registered
There does not seem to be a resolution other than this solution provided by a user crystaladvice:
http://www.crystaladvice.com/crystalreports/fix-class-not-registered-crystalprintcontrol
Unfortunatly I am receiving an error with regards to the attempt to regsvr32 the printcontrol.dll.
It seems this is a problem happening to more than one person - so I imagine it's an issue related to installing the Crystal runtimes for a 64 bit machine on Windows 2008 Server. I know Ludek mentioned he would test it in this thread
CrystalPrintControl not registered
Ludek mentioned he was going to check the MSI on a clean install. From what I can see it looks like whatever you install for Crystal Reports for your development machine works fine, but the MSI runtime install has an issue with a 64 bit 2008 server.
In the thread mentioned above Ludek had not yet posted the results, just wondering if this is an outstanding issue.
The current project we are working on is in a standstill - in the meantime I'll explore issues with not being able to regsvr32 the printcontroll.dll.
Thanks for any help.Hi K,
Most of those posts are for 32 bit deployments so they don't count... Including regsvr32.exe, there are 2 versions, one in
C:\Windows\SysWOW64 for 32 bit COM dll's and and another one in C:\Windows\System32 for 64 bit dll's, I think.... Confusing why MS did not rename their various 64 bit versions to *64.exe...
Also, please clarify, you said: "I'm not running Crystal Version 13.0.1.220" why not? You are using the SP 1 patch to build your app but using the 99 build ( SP 0 ) to deploy? make sure both are the same version.
We have found a few missing dependencies in the both the 32 and 64 bit MSI's and SP 2 should have the ones that have been reported.
A few issues here, Run Process Monitor on your DEV PC. But first, set your project to x64 Release Mode. And rebuild it...
Then from Explorer go to the \bin\Release folder and double click your EXE. It is now running in pure 64 bit mode, as you know the .NET IDE is 32 bit ONLY, running in 64 bit debug mode in .NET is confusing, you'll see both 32 and 64 bit runtime loading.
Do you get the same error? If yes then the Printer Driver you are using, does it support or does it have a 64 Driver available? And have you installed it and done a test app, no CR components, to verify it does actually support 64 bit applications?
Process Monitor will verify all parts being used....
So if the above works then it likely is either the dependencies for printing in 64 bit are not installed on the deployment PC or CR 64 MSI is missing something which Process Monitor can verify....
Don -
"Class not registered" error when creating Application
HI,
I successfully created HFM profile. I then went into Workspace and tried creating an application. After entering the required information and click create, I get an error message "CLASS NOT REGISTERED". Is there something wrong with the installation and configuration of the product. Will it be wose to reinstall the foundation Service and HFM again.Hi,
In the event error, can you read what {GUID} encounters the error message? Please also let us know the full error message.
Based on my search, this issue can be caused by the incorrect registry permission settings.
Please launch Registry Editor and navigate to HKEY_CLASSES_ROOT\CLSID\{GUID} to verify the permission settings.
If it does not work, you may run Process Monitor to check what process encounters this error.
Process Monitor v3.05
http://technet.microsoft.com/en-us/sysinternals/bb896645.aspx
Here is the related blog for your reference:
How to troubleshoot the “Red Arrow” issue in Component Services ( I )
http://blogs.msdn.com/b/asiatech/archive/2010/02/22/how-to-troubleshoot-the-red-arrow-issue-in-component-services.aspx
Kate Li
TechNet Community Support -
CLASS NOT REGISTERED error msg
My System is restored from a Hard disk crash when i try to run SQLPLUS
iam getting following errors ..
Error 6 initializing sql*plus
msg file sp1<lang>.msb not found
sp2:0750 you may need to set ORACLE_HOME to your oracle software directory
similarly when i run toad
iam getting
CLASS NOT REGISTERED ..
can anyone tell what actions i shud take ..do i need to do anything like this ?
Re-registered XfsLocal.dll0 and XfsRemote.dll it solved my problem .. (was posted by one of the user before) -
Dynamic SMTP Port Error -Class not Registered
Hi,BizTalk receiving the Invoice Message from Source and doing some transformation.After that Biztalk will send email dynamically via SMTP .Below is the code in message construct message assignment shape
multipartMessage1.MessagePart_1= XMLdoc;
multipartMessage1.MessagePart_2="This is message part2 as a string";
multipartMessage1(SMTP.Subject) ="Email From Dynamic Port";
multipartMessage1(SMTP.From) ="[email protected]";
multipartMessage1(SMTP.SMTPHost) ="100.110.120.99";
multipartMessage1.MessagePart_2(MIME.FileName) = "Attachment_Name";
multipartMessage1(SMTP.SMTPAuthenticate) =0;
SendInvoicePort(Microsoft.XLANGs.BaseTypes.Address)="mailto:[email protected]";
When run the application, getting below error message.
A message sent to adapter "SMTP" on send port "HelloWorld_1.0.0.0_Microsoft.Samples.BizTalk.HelloWorld.HelloSchedule_SendInvoicePort_d7ce16ba803d4f87"
with URI "mailto:[email protected]" is suspended.
Error details: Class not registered
MessageId: {0D6BBA1A-F384-4AD9-8B48-44A9C342DEFB}
InstanceID: {EAFEADE1-8D05-4A7D-A908-7BC297788D06}
After googling ,I have added
multipartMessage1 (SMTP.EmailBodyTextCharset) = "UTF-8".but no use.
I’ve spent many hours on this issue .Please advise how to resolve this issueHi Singam,
What is the default handler(host) configured for SMTP Adapter. Check it is 32 bit or 64 bit.
This seems to be a known issue if Host is of 64 bit.
Retrieving the COM class factory for component with CLSID {254B4003-2AA7-4C82-BB2E-18BA7F22DCD2} failed due to the following error: 80040154 Class not registered (Exception from HRESULT: 0x80040154 (REGDB_E_CLASSNOTREG)).
When you use BizTalk in 64 bit version, and the Mime/Smime encoder you’ve got this error. To resolveit, just put your pipeline on a 32 bit Host.
Mime/SMIME encoder error :
Class not registered (Exception from HRESULT: 0×80040154 (REGDB_E_CLASSNOTREG))
http://social.technet.microsoft.com/wiki/contents/articles/7204.biztalk-server-list-of-errors-and-warnings-causes-and-solutions.aspx
As you are using Dynamic Send Port it will run under the default host make it of 32 bit, restart the host and see if the issue is resolved or not.
Thanks,
Prashant
Please mark this post accordingly if it answers your query or is helpful. -
Excel Viewer: Class not registered (error -214722116​4)
Hello,
I am using the Excel examples shipped with Labview 8.21 to read from an Excel file and this works well. Now I need to do the same but on a PC that does not have Microsoft Office or Excel installed but only the free XLVIEWER (Microsoft Office Excel Viewer). When I try to change the ActiveX class of my reference to feed the 'Automation Open' vi I get the Class not registered (error -2147221164) although I can browse down to the XLVIEWER.exe and select it. Then I thought that maybe XLVIEWER had no ActiveX to communicate with other application; I thus installed a package called excelocx.exe, rebooted the PC but that did not change anything. I am still stuck with the same error.
What am I doing wrong?
Thanks a lot,
ChristophePlease find attached the VI I am using together with the XLS file that I try to read with Labview on a Pc that does not have MS Excel installed, only the XLVIEWER.
OpenOffice is not supported in our company so cannot be considered as a valid solution.
Thanks,
Christophe
Attachments:
Read Excel File with Labview 820.zip 31 KB -
Error occured at Class not registered... Because Excel is not installed?
I received the following error while trying to run an application built with LV 7.1:
Error -2147221164 occured at Class not registered in Open_Excel.vi > Report_generation_excel_Tbeta WITH new layout.vi > Mirror_Cycling_Main tbeta-2.vi
Could this be because Excel is not yet installed on the computer? Will there be a problem if Excel is installed after the 7.1 Runtime Engine and LabVIEW drivers?
Also, should I stay away from installing higher versions of Excel than what was originally used?
Would it be possible to create a VI like this with the base version of 8.2? I'm not certain what some of the controls on the front panel are and 7.1 does not give me additional information in the help dialog- if someone could give me the names of the various components circled in red in the attached JPG I would appreciate it.
Thanks,
Dave
Solved!
Go to Solution.
Attachments:
excel_vi.JPG 79 KBI'm using excel 2003 with labview 2009 v9.0f2. I have attached the VI here. Basically, Im just using the"excel get all data.vi" to read an excel file to create an array and that's where the error occurs.
Max
Message Edited by MaxXx on 12-07-2009 10:33 AM
Attachments:
Excel Get All Data.vi 26 KB
Excel Get Data Specified Field.llb 209 KB -
I think my lap top has a lot more problems, then the sun has Hot spots! :)
(not that I am down playing any one's situation, nor want to sound cynical or Condescending).
Though many of my issues have been resolved through a LOT of time, tech support and a couple friends and personal researching.
But I get the "Class not Registered" Every time I try to update Windows,
(I have Mozilla Firefox 30 and Windows 8.1)
On Top of small Error box, I get EXE..on top. But Inside the error box "Class not Registered"
Some of the other issues or problems were self inflicted by not researching properly, so to say the least I am being extremely cautious.
I have the same issue with Class not Registered, and looking for some ideas or hopefully the solution.
After I try running a windows update and any updates for my virus scan "Defender" which is what I believe windows 8 and 8.1 uses, I am not sure about Vista or Windows 7 have, I never used them.
I went right to 8 through a new lap top. Then I got Windows 8.1 (that was about a month ago)
But if anyone does find or even know an answer please reply as soon as you are able, anyone else who may just be reading, if someone gets anything that did work for them, Please Let me know.
Due to time I couldn't read through more Forum suggestions or links that may work for
My Error EXE. "Class Not Registered" :)
BUT will return later in day. Maybe anything I found an answer for I can pass on. i Have had plenty issues since I had a type of crash (Or whatever it was when I was online with a Tech from Microsoft and and he had it so both of us could control the Arrow cursor, I double checked phone number for MS and it checked out legit,
That was the beginning of many days of constant repairing That was back around July 6th 2014 Thanks to everyone who even just reads this, BuddyDThis is might because of your prior change in softwares. so first you have to do run '''sfc''' in run command. and then you see the specific problem which causes this . Since System File Checker (sfc) scan will make Windows replace corrupt or missing system files on your computer.
* Click Start>All Programs>Accessories>right-click Command Prompt, and select Run as Administrator.
* Click Continue or supply Administrator credentials if prompted.
* In the Command Prompt window type the following, and press Enter:
sfc /scannow
Refer this KB article for more information:
http://support.microsoft.com/kb/929833
See this is not a problem of firefox till now. You can check more with microsoft answers site. -
HD-4310 Webcam software.
When installing I get this error message:
" Class not registered " (without speech marks)
I followed a tip to use " sfc /VERIFYONLY " to scan for a permissions problem but my system comes up clean.
Can anyone help?
Much appreciatedThanks for the expansive reply. I must say, I disagree with your statement: “As I said, it was a problem with the HP Webcam installation, not Windows Explorer. It's a good job I didn't take your suggestion for a solution in the first link and act on it.” I am going to provide an elaborate explanation as to why I disagree with this statement.
Firstly, I'm going to provide you with the most significant troubleshooting steps from the first link I provided (link is http://answers.microsoft.com/en-us/windows/forum/windows_vista-desktop/explorerexe-class-not-registe...
“Hello,
I would suggest the following support steps....
-Load into Safemode and verify if you are able to access your desktop
-Create an alternate user account and verify if you are experiencing this issue.
-System Restore your computer to a previosu date and time when it was functioning normally.
-SFC /scannow
-Perform a repair Installation of Windows. (Universal steps are listed below)
Please proceed with performing a repair installation of the OS. In case of a failure, please ensure that you back up your data to an external location prior to performing the repair. Below are the steps to proceed with the repair process.”
I will cut the quote at this point. Now, I have worked, researched, and experimented with software on Windows since 2000. Running the computer in Safe Mode is always a troubleshooting step. The part about accessing the desktop may not apply, however, running in Safe Mode is crucial and helpful. I cannot describe how vital it is in certain types of troubleshooting. Creating a new user account and attempting to perform the same mission can potentially repair all “Class not register” errors, not just specific errors. Of course, this will point to an issue on your primary account. The system file checker scan is always valid, because you never know what it will detect, which can be significant. A System Restore may or may not work, depending if the software did work at a certain point. Finally, a repair installation of Windows, while it is a monumental task, is a troubleshooting step.
Secondly, I noticed the Operating System that is subjected on the thread is Windows Vista. I informed you that I would require you to inform me of your operating system, and model number, so I can assist you further. However, the funny factor about the more recent Windows operating systems is that troubleshooting is extremely similar on all operating systems. I provided the best thread I could, without knowledge of your operating system, since the troubleshooting provided applied to Windows 7 as well.
Thirdly, I'm going to quote your statement, then provide my response:
“The better advice would have been to let me know how to find the Problems and Solutions in the Action Centre and get some more information before a complete repair of my entire OS. I can't remember how I found out now, but I couldn't find them there and took a tip to type the name "problem reports" into the search bar of the start menu and click on "view all problem reports”.”
While this troubleshooting is valid, my style of troubleshooting enables this troubleshooting step to only be performed on special occasions. This issue was not one where I would've elected to perform this task. My troubleshooting I provided would've narrowed down the issue, ultimately, if it wasn't resolved. Even if I had to troubleshoot this issue from scratch, I would not perform this task.
I worked on behalf of HP.
Maybe you are looking for
-
Why can't I attach a file when sending an email [in firefox]
When I am sending an email in fire fox I am unable to attach a file. When I click the button,nothing happens. I am able to attach files when I use a browser other than fire fox. Can you tell me why this happens only in fire fox. Regards Ron Colburn
-
Creating Declarative Component problem.
Dear all I use Jdeveloper 11.1.1.4.0. I am planing to create an ADF declarative Component.The component will be a panel collection layout which contains menu (Action>Export to excel) and command button (Add new record). The scenario will be like this
-
Changed name, now won't display change
I changed the name of my blog from "Blog Test" to simply "Blog" (still playing with iWeb). But the change won't show up on any of the pages, meaning that "Blog Test" still appears at the top of the Welcome page rather than "Blog". Any tips to correct
-
In what file are the albums saved
In what file are the albums saved
-
Black screen/reset doesn't work/restore error 1601
All of a sudden my iphone 3gs went dead. Reset with home and lock button does nothing. Plugging into a charger shows nothing on the screen either. When I connect to itunes (on a powerbook G4), it sees an iphone in recovery mode that needs to be resto