Bubble chart with scatter chart type and different bubble sizes

Hello everybody,
I would like to create a bubble chart (scatter chart) within Oracle 11g and Apex 4.2 with the standard chart types that come with Apex (anychart).
I want to integrate two different KPIs (key performance indicators) in the chart, one for each axis (x and y) and additionally the size of the bubbles shall represent the size of the company, the KPIs belong to.
That is to say, every bubble represents a company with two KPIs and its size.
Now, I have problems changing the size of the bubbles. Can someone give me a hint where to start or how I could achieve this with a standard sql query (series) !?
Is that possible with the standard charts (scatter type)?
Can I control the color of the bubbles?
How can I control the starting and ending points of the axes in order to show all bubbles completely even if they are e.g. 0,0 (x,y) (this would show only a quarter of the bubble) or 0,3 (which would show only half of the bubble).
I will be very thankful for some hints.
Thank you very much in advance.
Johnny

Go to any chart and look at the examples. You can view the xml, there are bubble chart examples.
AnyChart - Cross-Platform Flash Charting Solutions For Your Project

Similar Messages

Add multiple graphs in one chart(ex.scatter chart) using labview excel report generation toolkit

How to add multiple graphs in one chart(ex.scatter chart) using labview excel report generation toolkit. Assume like my test data is like below:
X-Axis
Data1
Data2
1
1
2
13
2
3
14
3
4
15
5
5
16
3
6
7
7
The above graph generated manually in excel. I want to generate the same using excel report generation toolkit. when I use Excel Insert Graph.vi where the input data is 2D array with numeric data but here labview converts the empty cells (eg.x -axis 1,data1- is empty) as zero and while plotting i am getting zero for empty cell values.
Can anyone please help me on how to plot the graph without adding zero for empty cells?
Thanks&Regards,
Bharathi T
TE
X-Axis
Data1
Data2
1
1
2
13
2
3
14
3
4
15
5
5
16
3
6
7
7

Hi Bharathi,
The Excel Insert graph function takes in only 2d arrays as inputs. Since arrays can only have numeric values, any table with a null string is read as 0. Now to get a plot like you mentioned, you could read the table and replace blank Strings as NaN. NaN values in an array when plotted do not appear in the excel sheet. For reference I have attached a sample vi to help you understand.
Regards
Vijetha Nuthakki,
Applications Engineer
NI Systems India
Attachments:
Excel_graph_multiplot.vi ‏21 KB

VF11 wrongly created with RV Doc type and with not clear status.

Hi All
Issue: There are 2 billing documents which were created(VF01) in March are canceled (VF11) in May. Cancel document is saved with a message (No automatic clearing of billing document XXXXXXXXX) and message diagnosis saying that u201CThe Automatic clearing of billing document and reversal is not possible. This may be, for example, because the line item update is deactivatedu201D
In the SD document flow cancel billing document is created and it's posted to accounting with Document type RV(which is not configured in the billing types) and it is in not clear status.
2 Sales order types are ZNRC(No Rebate u2013 Credit)    second is ZCR (CM Req With Refer).
Order Type : ZNRC , Billing type :ZG2, Cancel billing type :Z5, Accounting document in billing type for ZG2: is DG and accounting document in cancel billing type Z5 is :(_) blank.
Order type: ZCR Billing type :G2, Cancel billing type :S2, Accounting document in billing type for G2: is DG and accounting document in cancel billing type S2 is :(_) blank.
      FI document type Not maintained in the cancel billing type configuration because this should be determine by reversal document type DA which is maintained in DG document type from FI side. It will be triggered in VF11)
The above configuration is working with the order created VA01,billing VF01 and cancelling VF11 done in same period. If the order and billing done in old period and canceling(VF11) done in current period than FI document creating with RV document type and with not clear status in the document flow.
I reviewed similar issues with SAP Note and with below explanation:
          "There are 2 procedures that are possible when Vf11 is posted.
          Old Procedure - An FI "Reversal" document was created that was not connected with the orignal.
          New Procedure - A Real FI reversal was carried out with clearing."
In this case, our system is following with new procedure except above mentioned orders created in previous period and and canceled in current period.
My Questions are: How the RV document is getting triggered here? why the cancel document (Reversal FI Doc) is not clearing?
     Appreciate your answers or suggestions.
Thanks in advance,
Sunil
Edited by: Sunil kumar Matta on Jun 9, 2011 3:40 PM

Thank you Ivano.
I referred SAP note 1259505 and 339928. But initially we thought of none of the symptoms mentioned in the SAP note are matching with our issue. Then we contacted SAP online support and they suggested checking one SAP note (Mentioned above).
Our system is following new cancellation procedure, but itu2019s failing only for some few documents.
Finally we identified several reasons for the issue. One is profitability segment in the billing document and cancelled document is different due to some changes in segment assignments. Another one is consolidation- consolidation document does not exist in the billing document list but it is getting created in Canceled document (VF11).(Consolidation postings are switched off some time back and now itu2019s on)
After some discussions it is decided to include accounting document type (Reversal) in cancel billing types to avoid default RV document type in canceled billing document accounting document. And non-cleared documents need to be created manually in F-32.
Thread is closed.
Sunil

Query parameters with the same name and different values

According to HTTP, multiple query or post parameters with the
same name and different values are permitted. They are transfered
over the wire in the following format -
name1=val1&name1=val2&name1=val3
The problem is that I can't see anyway of assigning multiple
parameters with the same name and different values to the request
object of mx.rpc.http.HTTPService. I have tried using the
flash.utils.Dictionary object as it does strict key comparison but
that doesn't work too. I have tried setting an array of values to a
property of the request object but that sends the request to the
server in the following format -
name1=val1,val2,val3
The java servlet engines throw exceptions when they see this.
Any help would be greatly appreciated.

If you're not on 8.1.4 move there. 8.1.3 had limitations in the wsrp
release.
wrote:
I have an html select box that contains several values, and multiple
selection is enabled. When my code runs as a remote portlet, the
following is showing up in the soap monitor when I select multiple
values and submit the form:
<urn:interactionParams>
<urn:portletStateChange>cloneBeforeWrite</urn:portletStateChange>
<urn:interactionState>_action=addEmployeesToGroup</urn:interactionState>
<urn:formParameters
name="P62005wlw-select_key:{actionForm.selectedEmployees}OldValue">
<urn:value>true</urn:value>
</urn:formParameters>
<urn:formParameters
name="P62005wlw-select_key:{actionForm.selectedEmployees}">
<urn:value>beatest1</urn:value>
</urn:formParameters>
In this case, I selected beatest1 and beatest2, but only beatest1 comes
through to the remote portlet. Is this a known bug, and, if so, is
there a patch or workaround available?
Thanks in advance,
Andy

Show channels with own time channel and different length in one 3D graph

Hi,
How can i show channels with own time channel and different length in one 3D graph?
My consideration looks like this, but i didn't found a solution with acceptable performance. ( i have many channels to merge and many data in them)
i have 4 Channels 2 with values and 2 with time.
Example:
Pair 1:
1 - 3
2 - 4
3 - 5
4 - 8
5 - 9
Pair 2:
1.5 - 6
2.3 - 7
4.5 - 8
I want than this result:
1 - 3
1.5 - null
2 - 4
2.3 - null
3 - 5
4 - 8
4.5 - null
5 - 9
And
1 - null
1.5 - 6
2 - null
2.3 - 7
3 - null
4 - null
4.5 - 8
5 - null
thanks a lot
by
Stefan

Hi StefanF,
You need to first create the timebase that you want (in this case with a 0.5 increment) using the "Generate Numeric Channel" ANALYSIS function, then use the resulting time channel in the "Linear Mapping" ANALYSIS function for each of the original channel pairs.
Brad Turpin
DIAdem Product Support Engineer
National Instruments

Conditional formatting doesn't work with scatter chart

Hi,
I am working on OBIEE 11g(11.1.1.7.0) and trying to create scatter chart with conditional formatting. But this is giving issue and conditions are not getting applied.
suppose I have take columns "product numer","product","office","product type","Revenue" & "Actual unit price"
I created the scatter chart using above columns and applied below conditions.
if revenue is equal to/ is in 1080 then color is yellow
if revenue is less than 1080 then color is blue
if revenue is greater than 1080 then color is red.
After applying all the condition, 1st condition is not getting applied. All the charts are showing blue and red color only.
Anyone have any idea about this issue?
Thanks
Krishna

looks like it is bug in 11.1.1.6.2 which is not fixed in 11.1.1.7.0
Bug 14286482
I tried it locally with 11.1.1.7.0 on dimension column the condition filter is applying but not on measures !
thanks,
Saichand

Help with scatter chart from scratch!

I need to do a scatter chart using numbers on mac. Help section says to choose x & y axis I cant find where to do that I have never done a scatter chart before I have all data on another chart to which I need to add scatter chart Report due Monday!

To me... the easiest way to make any chart is to make sure nothing is selected on a sheet, then select the chart type I want from the Chart Menu in the toolbar:
This will insert a new chart with some made up data (default) data which you can now modify:
If you have only one series of data then you can click the chart to select, then grab (click and hold)) the little circle at the bottom right of the highlighted section in the table and move it to the left to adjust the amount of data presented in the chart:
I would also suggest downloading the Users' Guide to assist:
http://support.apple.com/manuals#macosandsoftware

Why isn't there a chart with ios, mac os and itunes compatibily?

Since there are so many people who have been screwed over by upgrading to a newer ios without knowing that they would need a different version of iTunes that can only work with a newer Mac os, but their computer cannot run that os, so now they are out of luck, WHY isn't there a chart somewhere that shows the compatibility between ios, itunes, Mac os and even Mac computer versions? The info is available if you search for it separately (lots of searches), but I can't find it all in one place. For example, ios7 works only with itunes 11.1 and up on 10.6.8 and up on an intel Mac. That is really useful for people who want to make sure their whole infrastructure is compatible before they upgrade. Does anyone know if something like this exists anywhere? Thanks.

sbwinter2 wrote:
Some of the most useful guides are usually made by users
I'm sure some people would be very grateful if you went ahead and did the work.
Best of luck.

Multiple Line Charts with Column Chart

I want to show two line charts with a column chart. Everything goes on the screen fine, except the two line charts origination point always starts at the same point despite the numbers being different. For example, the ls1 might read 280, 190, 180 and the ls2 is 175, 188, 177 but both origination points start at 280. The other two datapoints should also be close together but they have a substantial gap of about 50 between them. Obviosuly I want to have two separate lines. I have also tried moving the line series below the first lines series with no success.
<mx:ColumnChart dataTipFunction="formatDataTip"id="
myChart" dataProvider="
{FCVData}" showDataTips="
true"selectionMode="
single"change="event.stopImmediatePropagation()"
width="
100%" height="95%" y="50">

<mx:verticalAxis>
<mx:LinearAxis title="mytitle" labelFunction="defineVerticalLabel"id="
v1"baseAtZero="
true" />
</mx:verticalAxis>
<mx:horizontalAxis>
<mx:CategoryAxis dataProvider="
{MYData}" categoryField="
YEAR"
/>
</mx:horizontalAxis>
<mx:series>
<mx:ColumnSeries id="
pb"color="
#FFFFFF"xField="
YEAR" yField="B
UDGET" displayName="
Budget"hideDataEffect="
zoomOut" showDataEffect="
zoomIn">
<mx:fill>
<mx:SolidColor color="{colColor1}"/>
</mx:fill>
</mx:ColumnSeries>
<mx:LineSeries id="ls2" dataProvider="
{MYData}" yField="
ACTUAL"displayName="
Actual"
>
<mx:itemRenderer>
<mx:Component>
<mx:DiamondItemRenderer/>
</mx:Component>
</mx:itemRenderer>
<mx:lineStroke>
<mx:Stroke color="
{lineColor2}" weight="
5" alpha="
.5"
/>
</mx:lineStroke>
<mx:verticalAxis>
<mx:LinearAxis id="v3" baseAtZero="true"/>
</mx:verticalAxis>
</mx:LineSeries>
<mx:ColumnSeries
id="
asytd"color="
#FFFFFF"xField="
YEAR" yField="
SPEND" displayName="
Spend "hideDataEffect="
zoomOut" showDataEffect="
zoomIn">
<mx:fill>
<mx:SolidColor color="{colColor2}"/>
</mx:fill>
</mx:ColumnSeries>
<mx:LineSeries id="ls1" dataProvider="
{MYData}" yField="
PLAN"displayName="
Plan"
>
<mx:itemRenderer>
<mx:Component>
<mx:CrossItemRenderer/>
</mx:Component>
</mx:itemRenderer>
<mx:lineStroke>
<mx:Stroke color="
{lineColor1}" weight="
5" alpha="
.5"
/>
</mx:lineStroke>
<mx:verticalAxis>
<mx:LinearAxis title="title" id="v2" baseAtZero="true"/>
</mx:verticalAxis>
</mx:LineSeries>
</mx:series>
<mx:verticalAxisRenderers>
<mx:AxisRenderer placement="left" axis="{v1}"/>
<mx:AxisRenderer placement="right" axis="{v2}"/>
<mx:AxisRenderer visible="false" placement="right" axis="{v3}"/>
</mx:verticalAxisRenderers>
</mx:ColumnChart>

Hi,
Still Trying:
I've now got this code to function:
var i:int = 0;
                for each (var cat:* in event.result.chart.categories.category){
                    //mx.controls.Alert.show(cat.label);
                    var z:int = 0;
                    for each (var valuee:* in event.result.chart.dataset){
                        //mx.controls.Alert.show(event.result.chart.dataset[z].seriesName);
                        //mx.controls.Alert.show(valuee.sete[i].value);
                        z++;
                    i++
which works fine, how can I get in into Array to make a dataset for the flex charts?
Thanks,
Elad

Area chart with line chart

Hello again! I would like to develep a area chart with a line chart in one chart. Is it possible with Crystal? Thanks!

Did you mean a Trendline? If that is the case, right click on any of the areas in the area chart and select Trendlines from the context menu.

List with Multiple Content Types and Making new Forms...

I go to create custom forms based on content types. After I create using the wizard in the list it always shows the same form no matter which content type I pick.
what am I doing wrong?
David Jenkins

You can change the custom form on content type through SharePoint Designer. Do not change it on the content type directly, when you add content type in a list/library, then open list's content types in SP Designer and then select your content type and modify
the URLs of your custom display form.
I have updated a document in gallery for
step by step development of custom workflow and custom task form. In this document you can find the association of custom form with content type using SP Designer.
Adnan Amin MCT, SharePoint Architect | If you find this post useful kindly please mark it as an answer :)

Problem with the Output Type and Transaction ME9F

Hi,
      I have an Output Type (xyz) and Program (abc).
      If for ME21N i give the output type ( xyz ) the n am able to get the Spool and
      Printout.
      If for ME9F i give the output type ( pqr) then am able to get the Spool and
      Printout.
      Problem is :---
      when am using O/P Type ( xyz ) for ME9F then am abel to process but am
      not able to get the spool and not even printout.
      I want to know where it can be wrong.
      It's a high priority object.
Kindly help me out.
Thanks,
Zia.

hi Zakir,
1.check the output type under
apllications 'EF' IN transaction NACE.
2.select that ef and press the push button output types .
3. now check ur output for is present here or not ..
just click the position button and give ur output type ..
4. when u find ur output type .. select that o/p type and click processing routined on the left side where u will see ..
when u do this
u ll see the details like
output type . the output type "
application . 'EF'
and the mode of medium .
1. print out
2. fax .
6. edi etc.
this is the way to check what are the mediums present for the output type ..
check whether u r <b>entries (xyz) and (pqr) are having medium 1.</b>
if its missing then assign it ..
regards,
VIjay

Problem with BLOB data type and acute characters

Hi all, I have an issue related with BLOBS cols:
I have table A with a BLOB column and I need to insert that data into another table B, the thing is I use dbms_lob.read() that returns data into a RAW variable and then I convert it to a varchar2(with utl_raw.cast_to_varchar2) and it works ok if I have no "acute characters" on it, e.g Québec.
If I have acute characters, the "é" is inserted wrongly with an "¿" character on the table B. I tested the BLOB on the table A to check the data and the BLOB is showing correctly the "é" character, it seems that the dbms_lob.read() funct cannot handle accute characters and replace them with "¿".
How can I replace acute characters when I use the dbms_lob.read functionality?
Thank you!

what's the OS of the db server? is this code an anonymous pl/sql block, or stored pl/sql? does it run on the server or a client? if it's on the client, what's the o/s of the client?
you might want to look at the following, plus the first 3 notes in it's reference section
https://metalink.oracle.com/metalink/plsql/f?p=130:14:3038746456038321058::::p14_database_id,p14_docid,p14_show_header,p14_show_help,p14_black_frame,p14_font:NOT,264157.1,1,1,1,helvetica

Wrong layout chart with IGS 7.0 and 3.0b webtemplates

Hi,
We just did an upgrade from BW 3.0b to 7.0. We also upgraded te IGS to 7.0. We don't want to upgrade our webtemplates to the new version yet.
However, if we display a chart now, it shows a wrong layout. If we change the IGS back to an old version it gives the right layout again.
Should charts of 3.0b webtemplates work with IGS 7.0? Are there any setting that we can do to make this work?
Thanks for your help!
Guus Berenschot

Hi,
BW < 3.5 used a different chart component of the IGS, i.e. all the customizing settings of your charts are saved in a different format than in 3.5 or 7.0. That's the reason why all these settings have to be converted before using them in your new system.
Please note that you have to use the standalone IGS 6.40 temporarily when calling the migration report. When the migration is finished remove the IGS 6.40 and use IGS 7.00.
Regards, Kai

Plotting multiple graphs on one waveform chart with dynamic data types

I'm trying to put multiple graphs on one waveform chart and having data agreement errors. I'm wondering if it has anything to do with the fact that dynamic data is being used (I've had no problems with other datatypes in the past). Does anyone know how to correct this problem? I've attached the following .VI. There will be plenty of .VIs on the bottom that won't load, but they are not consequential for this problem.
Thanks!
Brian
Solved!
Go to Solution.
Attachments:
Stiffness Control V1.vi ‏119 KB

you could use stacked plots by right clicking on the chart and clicking on the stacked plots and than on the front panek you can put a bundle function on the FP and hook your signals up
Harold Timmis
[email protected]
Orlando,Fl
*Kudos always welcome
Attachments:
multiplotwaveform.JPG ‏138 KB

Bubble chart with scatter chart type and different bubble sizes

Similar Messages

Maybe you are looking for