Budget Structure, Posting Address and Budgeting Address Error

Hi All,
I am having a big issue with Budgeting and posting of expenditure against budgets. Whenever, I try to create a vendor invoice for my system where FM has been configured I get the following error.
FM account assignment Grant/Fund/Fund Center/Commitment Item/Functional Area/Funded Program cannot be posted in posting ledger 9A.
Message no. FMBS123
Please if anybody has any idea of how I can resolve this, I will be very grateful. I understand that it has to do with posting addresses and budgeting structure but I have searched so much and could not find a way to create a budget structure or assign the posting address to it. Please this is urgent and I will be very happy if it is resolved as soon as possible.
Cheers

Hi,
Budget/posting addresses are maintained via FMBSBO/FMBSPO transactions. Before creating a new posting address you'd better consult with someone who has a grasp of your budget activities.
Regards,
Eli

Similar Messages

  • Sales tax data in the posting term is not consistent (Error in Real Estate)

    The following error is occured while creating a real estate contract.
    Sales tax data in the posting term is not consistent
    Message no. RECD076
    Diagnosis
    The sales tax data in the posting term is inconsistent.
    Procedure
    Switch to maintenance of posting terms and correct all errors that are shown there.

    Hi Ananda.
    What did you do to resolved this problem?
    Could you help?
    Tks
    Lucas

  • Budget Structure: Create Posting Addresses

    Hi
    I have a unique scenario where in for one FM area "ABC", Fund is activated and made mandatory for BCS(IMG:Activate Account Assignment Elements in Budget Control System).
    For another FM area "XYZ", the fund is made "not used" in IMG "Activate Account Assignment Elements in Budget Control System".
    Now while creating Budgeting Addresses for FM area = XYZ, system does not show "Fund" in selection criteria, as desired.
    But while creating Posting Addresses for FM area = XYZ, system shows "Fund" in selection criteria.
    Now if i try to create Posting addresses by giving only Fund Center and Commitment Item, it throws an error "Enter Fund".
    By deactivating "Fund" from global setting(IMG:Activate Account Assignment Elements), system does not show "Fund" in selection criteria but this is not desired as other FM area uses "Fund" attribute.
    Please help.

    Thanks Alex
    Actually i got that thought once, but then thought that if there is some other way where specifically we can deactivate fund, just the way its getting done for Budgeting Addresses.
    Also the second thought was about one to one internal assignment of Budgeting addresses and Posting Addresses, then system would take "Fund = Blank" and make the assignment.
    I assume there will not be any other way to deactivate fund for posting addresses for one FM area and keep it activated for posting addresses for another FM area.
    Regards

  • Trying to purchase trial period in different email address - error message "Error in Your Order The account was registered for a different country. Please sign out and sign in using an existing account for this country. Ok"

    Trying to purchase trial period in different email address - error message "Error in Your Order The account was registered for a different country. Please sign out and sign in using an existing account for this country. Ok"@

    Hi boags2014,
    Please refer this link and know the work-arounds for the same:
    How do I complete a purchase when I get an incorrect "country" error?
    Regards,
    Anubha

  • HT1918 So I changed my email address and got an error "invalid year" Any clues?

    So I changed my email address and got an error "invalid year" Any clues?

    Hi Stapleton2137,
    This sounds like an issue with your security settings for your Apple ID.
    If you are having issues with your Apple ID, the two articles below will help:
    Frequently asked questions about Apple ID
    Apple - Support - Apple ID - Manage Account
    Cheers,
    Judy

  • Budget Exceed error while settlement in PS T-Code CJ88

    Hi Guru's,
    I have created structure upto 6 level and i have done planning and budgeting at 6th level only, and actual cost is also posted at 6th level.
    When i am setteling that amount  at 5th level WBS using T-Code CJ88 then it is giving Budget exceed error of that particular amount as budget is also available at higher level WBS as accumalation of budget at 6th level is going to higher level WBS as i am following buttom-up approach.
    Please suggest.
    Regards,
    Ambuj

    Hi Rajesh,
    When you distribute budget to lower level WBS, the budget is only available at the lower level (availability is checked as: Budget - Distributed Budget - Assigned) regardless of whether it is shown at the superior level or not.
    AVAC status is activated automatically on WBS where budget is distirbuted and released (provide you have maintained Activation Type 1 in Budget Profile OPS9). Please check if AVAC status is active on your 5th level WBS. If it is active then the system will throw the error as SAP standard behavior. You can remove this status from 5th level WBS via CJBW.
    You may need to look at your budget configuration accordingly.
    Regards,
    Ammar

  • Are there BAPI or function modules for creating posting address ?

    Are there BAPI or function modules for creating posting address and budget address? We are currently use BDC program and T code FMBSPO_MULT (Posting address) and T code FMBSBO_MULT(budget address), but it is a very slow processing because we have thousands of funds centers.
    Your input will be appreciated!
    Regards,
    Fisher Li

    Li,
    You will have, may be more answers in the technical forum :
    https://www.sdn.sap.com/irj/sdn/collaboration
    Regards
    Valérie

  • Budget exceed error while unreleasing the service entry.

    Hi experts,
    My problem is the systm generating budget exceed error while unreleasing the entry sheet in current fiscal year.
    Entry sheet is released in privious fiscal year. User want to reverse this in current year. All budget(actual/commitment) are carryforwarded to current year. While unreleasing the entry sheet, system throwing the budget exceed error. There is suficent budget in current fiscal year.
    Request you to pl suggest what might be the cause of problem.
    Regards
    shrikant

    Hi
    Thanks for reply
    For WBS element A-101.01
    For year 2009
    current budget is  100000
    Distrubutable budget is 100000
    Assigned budget is  100000
    For year 2010
    current budget is  300000
    Distrubutable budget is 300000
    Assigned budget is  200000
    Service PO created in 2009 year for amount 20000/-. Service Entry sheet created  and released in 2009 .Vendor invoice has not be generated. Error budget exceed is raised for year 2009 while reversing the service entry sheet in current posting date.(privious posting period /year closed).

  • Mail's behavior on encountering an address error in sending to a group

    I routinely send to a group of 100+ addees, broken into three sub-groups because of ISP (Comcast) anti-spam limits on the number of addees.
    Several times I have gotten the error message that something is wrong with an address and the post remains in the OutBox.
    I have found the error and corrected it but do not know if
    (a) the correctly addressed emails were sent and only the one with the error was held for correction and subsequent sending, or
    (b) only the one with the error was held and the others trashed, or
    (c) they were all held until the error was corrected and all were then sent, or
    (d) none of the above.
    I have some inkling that (b) is what happened but I can find no way to determine what Mail actually does upon encountering an address error or what I should do. The programmers must have devised a strategy and I'd appreciate knowing it.
    Can someone help me with the logic and what to do when such an error occurs?
    BTW, I am using Smart Groups and they seem to work flawlessly if I don't make an error in an address!
    Thanks in advance...
    Bill
    dual 2GHz G5 PowerMac   Mac OS X (10.4.7)   Plain vanilla computing..

    Ernie, David,
    Thank you for the info. I now know that a message addressed to a group is "all or nothing at all," i.e., if one address is incorrect (in my first case, a "." where an "@" should be) everything stops until the error is corrected and then all messages are sent.
    There was a second error of a nother nature in another group (about which I can't remember the details, but it was an obvious typo) that generated a different error message (I should have copied both!) and when I cleared it everything also seemed to be sent.
    It seems Mail is deliberately designed to be tolerant of us mortals, giving us a chance to correct a hitherto unknown error and then going about its business. Nice design.
    I'll let you know if I run into other problems. And you can be sure I'll be more careful when importing addresses into Mail.
    Thank you very much for your kind help.
    All the best,
    Bill

  • Budget Exceed Error during creating of Purchase order in reference to PR

    Hi,
    I am getting the subject error (Budget Exceed Error) every time when I want to create a purchase order related to purchase requisition of my project.
    Issue is that after release the project when the purchase requisition has created for non stock item under activity I found in transaction CJ31 the assign value has already updated.
    Let say my budget is 400 US$, and the purchase requisition has created for 380 US$. Now when I check with CJ31I found the assigned value is 380. Now If I create a purchase order it throws an error that budget exceed.
    The tolerance limits are following:
    SA     ZSA01     Budget Profile Overall AVAC     ++     1     90,00
    SA     ZSA01     Budget Profile Overall AVAC     ++     3     100,00
    SA     ZSA01     Budget Profile Overall AVAC     01     1     90,00
    SA     ZSA01     Budget Profile Overall AVAC     01     3     100,00
    Please advice what will be the proposed solution for the above issue.
    Thanks in advance.
    With Regards,

    Your budget is 400$ and PR value is 380$ but you have not mentiond what is the tax value ?
    when u r creating PO at that time system will check the budget against PO value considering taxes also.
    eg. 380$+tax value.
    after considering taxes your total PO value imay be getting updated more that 400$.
    Explre you error by clicking on error information you get the exact diffrence in budget and PO value.
    Hope this will sove your problem, reply after doing this.

  • "Budget Exceeded" error not appearing at the time of changing PR but appearing at the time of PO change.

    Dear All,
    At the time of PR value change after creation of PO budget exceeded error is not appearing even though the PR value exceeds the budget. But at the time of changing the same value in PO, budget exceeded error is appearing.
    List of steps:
    PR created.
    PR released
    PO created with reference to PR and released.
    PR value changed to a value more than the available budget - No budget exceeded error.
    PO value changed in accordance with the PR - System throwing the budget exceeded error.
    Now the issue is why the system bypassed the budget exceeded error at the time of PR value change and only giving the error at the time of PO value change. Also, we observed that while changing the quantity in PR which results in exceeding budget, system is giving the error. But while changing the value system is not giving the budget exceeded error.
    Your inputs will be highly appreciated. Thanks in advance.

    Hello Saurabh,
    Thank you for your inputs. Below is the output of CJI5.
    Ref,Doc Category  Debit Date     Oty       Object    Cost Elem.   Val/CO Area Crcy   Total Qty.     UM
    PREQ                  28.05.2014    WBS     XXXXXX    XXXXXX           0.00                         0            EA
    POrd                    28.05.2014    WBS                                       14,000.00                1000          EA
    From the above output i think system is not capturing the PR commitment. I'm not sure as i'm basically into MM and  dont know much about PS.
    Why the system is stopping with budget exceeded error at the time of PR creation and not giving any error while changing the PR value after PO creation. System is giving budget exceeded error if quantity is changed in PR. Please explain the standard system behavior and suggest how to enable control at the time of PR value change.
    Thanks in advance.

  • Budget Exceeded error with message No BP 602

    Hi Experts,
    I am facing a budget exceeding error: Ntwk actvty 6000001 0020 budget exceded year 2009.
    following is the settings
    Availability control against: Overall                        
    Availability control against: Budget                         
    Availability Control in the Controlling Area Currency:       
    Activation type: Automatic activation during budget allocation
    Usage level in %:  0,00
    The project is P.0001
    Top lvl P.0001
    WBS P.0001.1
    Network Activity (External services) 6000001 0010 PR-($40000) PO($20000) & Service entery done with same amount($20000).
    Network Activity (External services) 6000001 0020 PR-($1)
    Actual   $20000
    Commitment 20001
    Assigned 40001
    Available $49
    Now we updated the budget as below:
    The original budget was 40050 in IM then modified to 45050 and distributed in CJ30.
    When we try to update the Service PR with 49 or more dollars, gives error in commitments and when the log checked, the budget exceeding message is there, if the PR updated with 48 USD, it gives the budge is exhausted.
    40050(Old Budget)-40001 (assigned) = 49 USD. Which means, the supplement of the  5000USD is not considered.
    Run the CJEN and CJBN to reconstruct the project but no use.
    Please help me out where to check and what went wrong. its in client prd.
    Regards,
    Ganesh

    Hi,
    You said in reports and in CJ31 , it is showing 60049 as available. I am confused here......including additional budget , total budget you gave is 45000. Then how it can show 60049 which more than Original Budget ?
    Have you distributed additional budget to the WBSE for which Service P.R is being raised ?
    What is distributable budget at the level of the WBSE for which P.R is being created in CJ30 ?
    What Is available budget against the WBSE for which P.R is being created in S_ALR_87013558. ?
    May be it will be of saome help for you.
    Thanks
    Saikishore.Ganga

  • Budget validity error wen re-ordering PO- PO is error in process

    Hi all,
    SRM 5.0 ECS.
    I am facing few issues related budget check in PO .
    I tried adding a new line item in PO  to do a PO increase,the PO goes in error in process.When I see RZ20,the alert details show the following message:
    BUDGET VALIDITY FOR DATE XXXXX IS BLOCKED.
    I debugged the above error when the PO is ordered in SRM. and found that the MSG is GRANTMGMT 213 in ECC which is shown as the error with the bove text.
    But  now knowing this mesg ID and NO,how do I knowthe reason for which the error was thrown??
    What settings I need to check in SRM or ECC for the above budget related error???
    Thanks!
    Edited by: NMSRM1000 on Jan 20, 2011 4:13 PM

    You need to Check in ECC if the particular cost object ( Grant or Project) has a budget block. Once you remove the block , re-order the PO
    Thanks
    Kedar

  • Attempt to access invalid address error message

    What does this mean "Attempt to access invalid address" Happens when I try to open PS element 5. I uninstalled and reinstalled my PS element 5 but error message still appears when I try to open the PS sw.

    Hi Garry,
    Yes, I did download PSE 8 and it did work.  However, the trial period has ended.  I have uninstalled PSE 8.  I have also unistalled PSE 5 and then reloaded it.  Upon completeion of the PSE 5 load, I tried to open the PSE 5 and the invalid address error message continues to display.  I am very sad that I cant get PSE 5 to work.  Can you help with more things I can try?  Please let me know
    All the best
    David

  • AnyConnect client no assigned address error

    I am trying to set up the AnyConnect client (v2.4.0196) and when it tries to connect it fails with a no assigned address error. I look in the logs of the ASA and see a No IPv6 address available for SVC connection. IPv6 is disabled on the ASA.
    Does anyone know how to prevent the AnyConnect client from trying to get an IPv6 address?
    Thanks in advance...

    Note that 2.4 is still beta, 2.3.2016 is the latest supported release today.
    Having said that, I rather suspect an ASA issue than a client issue. Can you confirm whether or not an ipv4 address is assigned?
    I.e. is there something in the logs like:
    Oct 13 2009 09:05:55: %ASA-6-737026: IPAA: Client assigned 192.168.0.1 from local pool
    Oct 13 2009 09:05:55: %ASA-6-737006: IPAA: Local pool request succeeded for tunnel-group 'DefaultWEBVPNGroup'
    (note these are level 6 messages)

Maybe you are looking for