Bug? Copy page within an application not updating everything

We have a ApEx (Version 2.0.0.00.49) application, and it was decided to rearrange the pages to fit a better numbering scheme for maintenance purposes. Not a problem, as we copy each page to the new page number, then delete the old one. However, we found when this was done, the new pages were broken. Specifically:
1. If you page contained a branch to itself the page number was not updated properly. For example, most of our pages have an "On Submit: After Processing (Unconditional)" branch back to the same page. This branch was created by the page creation wizard. After copying the page, the branch was not updated to the new page number, but rather still pointed to the old (now deleted) page.
2. The reset page (Clear Cache for all items on pages) process source are not updated. If you have a process item for Clear Cache (we have one for the delete item process to refresh the report query). The Source Process item, which based upon what the wizards create, is the page number (or a list of page numbers). Again, since this is not update, the reset page process clears the cache for the old (now deleted) page.

I don't think this is a bug. It is possible that you want to copy a page and retain information for branches and processes to the old page number. These are just a couple things that you'll need to change manually after a page copy.
I guess the point is that when a page gets copied it's not always going to be obvious what needs to happen to things like branches and processes - so they'll need a little attention after copying to get them working properly again.
Earl

Similar Messages

Max number of pages within an application

Hi Gurus,
Does somebody know if there is a limitation in term of number of pages within an application ?
Thks in advance.
Thierry

We have apps with several hundred pages (I think 350 is the most we have in a single app). I think the real issue is how many total pages you have (all apps, all workspaces) as this could theoretically cause performance issues. Fortunately, the nice folks at Oracle have a real world scenario that will continue to outpace just about anything else--the hosted ApEx environment. It has thousands of workspaces with an incredible total number of pages. I have not experienced any issue with that environment, so I think the rest of us are quite safe.
Anton

HT4972 Why Pages and numbers are not updating.

My pages and numbers are not updating for about a week now Why?

Some one else had a similar problem last night...same as yours. He claimed that Pages had been stuck trying to update for about week. I posted this and he said that it worked - which part he did not say - but give these things a try.
Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download at a time on the iPad so that could be what is causing the problem.
If that doesn't work - sign out of your account, restart the iPad and then sign in again.
Settings>Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>Store>Sign in and then try to resume the download.
If you have all of your Pages files backed up in iTunes or on your Mac, this might be the answer. Try deleting the waiting icon - tap and hold down on an icon until it wiggles - the tap the X on the icon to delete it. Then try to download again.
I have deleted Pages a couple of times when I had issues with it and then reinstalled it. I even deleted a stalled Pages once and then tried the update successfully again after that. My files are always backed up in iTunes and on my Mac so I had no apprehension about deleting the waiting download.

Template error while copying page from another application

I am copying a page from one application to another within the same workspace. The page I am copying has several customized template that it uses. When I copy the page to the other application all goes well until I get to the step of assigning the Templates. Instead of seeing the list of templates used and being able to change them for the new page to match with the page i am copying, i get an error in the Templates area that says:
report error:
ORA-06502: PL/SQL: numeric or value error: character string buffer too small
Anyone else run into this? Is this because of the number of templates? I have added several new customized templates. The pages all work ok, its just when i am trying to copy a page from one application to another.
Thanks,
John

I'm seeing this behavior as well, but in the Authorization Schemes & LOV sections of the copy. I can continue with the page copy, but the LOV & Scheme information is lost and needs to be manually re-entered. Would love to get a fix for this!

Page Scheduler add-on not updated for FF4! Can Firefox add such a feature so users are not at mercy of independent developers that do not update their addons?

Page Scheduler is one of the handiest addons to FF, I do not wish to update to FF4 and lose this functionality. Can Firefox build such page scheduling functionality into their browser???
The developer of PS has not updated the app to run on FF4 nor have they provided any communication of any plans.

Well, ultimately nothing worked, except making all the settings I wanted to set part of mozilla.cfg. When I added your suggestion, along with another I found on the web to disable add-on compatibility check, I finally have a Firefox that loads straight to the home page, even after the upgrade.
Here's what my mozilla.cfg file contains (for 6.0.2):<br />
<br />
<pre><nowiki>
// Disable any auto-updates.
lockPref("app.update.enabled", false);
lockPref("extensions.update.enabled", false);
lockPref("browser.search.update", false);
lockPref("browser.startup.homepage_override.mstone", "ignore");
lockPref("extensions.checkCompatibility.6.0", false);</nowiki></pre>
Of course, I have to do the byteshift-13 to it, but copying the resulting file to Core\ and the firefox.js file to Core\Defaults\Pref\ does the trick.
Thanks for the help!!

Copy pages between different applications

Hello,
I'm trying to copy a page from one application to another with Apex 1.6.
In the first application I exported the page I want to copy and I've tried to import
it in my second application. But I got the message that my file was not in the correct format...
Is there any easy way to do it?
Thanks.
Sofie

Sofie,
No, there is no easy way to do it. There is a difficult way that has been cited many times in this forum (search for copy page): Synonyms
Scott

Pages on iPhone5S will not update to new version

My iPhone5S will not update to the latest version: 2.5.2. I tried a dozen times to update it, as well as Numbers. Finally, Numbers updated but Pages still wouldn't. What happens is that I click on Update, and it seems to be updating, then when it finishes and I click on Open, it reverts to Update. I checked the version under Settings, and it was still the older version. I was able to access all my Pages documents, but I was annoyed at seeing the Update reminder, so today I deleted Pages from my phone and intended to re-install it. Now when I bring it up and click on Free and then Install, it just goes back to Free..refuses to budge, so now I don't have any of my Pages docs on my phone. I've tried rebooting, doesn't help. I'm running iOS 8.1.2. All those docs are still there in the Cloud, and Pages appears correctly on my MBP and iPad, but I can't seem to update it---or now, even install it---on my phone. Does anyone have any suggestions? This seems so random.

i would try restoring it or downgrading it and then try it again, if that doesnt work i really dont know.

Applications not updated

My Ipod Touch is less than one week old, it worked fine for 2 days. Then no update on any application although the Wifi is ON.
Wifi is on. Password has been accepted. Network screen provides IP Address Subnet Mask Router and DNS - Search Domain and Client ID are left blank.
All existing applications, Weather, Stocks, ... are not updated.
I have tried to do a full restore. This does not solve the problem.
Has anyone got a solution to my problem.

There is no auto update, you have to go the App store and check updates. On the main screen under app store will be a red circle with a number in it that tells yo how many apps need updating. It's best to update when on WIFI, no data usage.

Home page weather display will not update how to fix this?

On my home page, my.Yahoo, I have selected "weather" for one of the displays. In the past this display kept pace with the current day but now it is stuck on a day and will not update to the current day. I have re-booted, terminated FireFox, restarted it, turned the computer off and back on, and the weather still is stuck and will not update.

A couple more suggestions:
When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
(1) Bypass Firefox's Cache
Use Ctrl+Shift+r to reload the page fresh from the server.
Alternately, you also can clear Firefox's cache completely using:
"3-bar" menu button (or Tools menu) > Options > Advanced
On the Network mini-tab > Cached Web Content : "Clear Now"
If you have a large hard drive, this might take a few minutes.
(2) Remove the site's cookies (save any pending work first). While viewing a page on the site, try either:
* right-click and choose View Page Info > Security > "View Cookies"
* Alt+t (open the classic Tools menu) > Page Info > Security > "View Cookies"
In the dialog that opens, you can remove the site's cookies individually.
Then try reloading the page. Does that help?

CC programs not downloading with complimentary subscription. And CS6 applications not updating at all. Why is this?

I have a complimentary subscription to CC and run CS6 Master Collection. The CC apps will not download, and the CS6 apps will not update. I followed the online instructions, checked for bugs and spoke to support on the weekend - who could not help. They suggested speaking directly to Adobe on a weekday. This must be an ongoing issue. Any solutions much appreciated.
b

Thanks for this response. Of course there's a link. However that link has not worked for me. I just posted another version of the same question to the Forum after 6 months of waiting for Adobe - to no avail. You can follow it here: I have owned Adobe CS Master Collection since CS3. I currently run CS6 and cannot update my software online. I run on a MacBook Pro Retina Mid 2012, 16GB RAM, SSD, with Mavericks 10.9
b

Pages and Child Templates Not Updating

I'm having a problem in Dreamweaver CS5 where pages and child templates are not receiving updates made to the parent template. When I update the template, sometimes some files using that template will update, and some will not. Repeatedly updating the template sometimes forces the changes, but other times it does not.
For instance I was working on a 50 page site earlier, made up of 1 master template with 5 child templates. I made changes to the master template, and it went through the update process, saying all the child templates and files have been updated. However when I open some, not all, files, they are not updated.
I manually went through the entire site and hit 'update page from template', and that seemed to work. I opened a different site with only 1 template, did an update, and it only updated some of the files. I updated the template again, saved, and it then proceeded to update a few more randomly selected files.
This was happening sometimes in CS4, but in CS5 it has become a bigger problem. Please let me know how this can be resolved.
Edit: This is on a freshly reinstalled CS5 with all updates.

MarilynWalker wrote:
Murray - Can share your book title with us, please?
Sure. It's Dreamweaver MX Templates by Brad Halstead and myself - ISBN 0-7357-1319-7. I spend quite a bit of time explaining nested templates. Sadly, nowhere do I say you should avoid them. But you should.
There is a master template that controls top level navigation and then five child templates that give different left-side navigation based on which section of the site the user is in. You can see this in action at www.homerenergy.com.
You should see how easy this is to do with server-side includes and a single template file. It's the best of both worlds.
You can see this in action at www.homerenergy.com.
Yep. http://validator.w3.org/unicorn/check?ucn_uri=http://www.homerenergy.com/&ucn_task=conform ance - even if you would leave the nested templates in place, you would sure want to fix those.
The section-specific navigation is very easy to manage either with template conditionals or with server-side includes. You can see this site - http://www.ent-sys.com - where I have done the section navigation on interior pages with template conditionals.
However, your site is small, and simple. Nested templates can work OK in such circumstances. But I have never seen a use of nested templates that couldn't be done more simply with some other approach.

Apex 2.2 copying pages from other applications

Is it possible to copy reports and pages from other applications with APEX 2.2 ?

Ben,
Pages, yes. On the Page Definition page, use the Copy button and follow the wizard.
Scott

Bug: date inserted in cell does not update automatically

Can't find where to report a bug in Numbers. When I insert a date in a cell and set it to update automatically, it does not update. Have to update it manually daily. Seems there used to be a way to report bugs...
Anyone know how to do that now?

Feature already reported.
+The Numbers User Guide states:+
+To add and format the date and time, place the insertion point where you want the value to appear, and then choose Insert > Date & Time.+
+To change the date and time format, Control-click the date and time value, choose Edit Date & Time, and then choose a date and time format from the pop-up menu. If you want the spreadsheet to always show the current date and time, select “Automatically update on open.”+
+Alas, under 10.4.11 *(and now under 10.6.1)* this feature doesn't apply.+
+The date remains as it was when we entered it.+
+Happily we have a simple workaround:+
+we may use the formula =TODAY()+
+But a feature wihch doesn't behave as described may be called a buggy one. Isn't it ?+
As long as the feature doesn't behave as described, use the given workaround.
Yvan KOENIG (VALLAURIS, France) samedi 12 septembre 2009 16:50:38

Console Application not updating the database

Dear all,
I am new to c# development. I have a console application front end in program.cs
I have a local database on visual studio.
When I execute the stored procedure locally on the database the data is getting updated in the database.
When I update the same through Console Application - the data is not appearing in the database.
Can somebody throw light on this? Where I am missing
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Data;
using System.Data.SqlClient;
namespace AssetApp
class Program
static void Main(string[] args)
bool value = true;
while (value)
value = getdisplay();
//Console.ReadLine();
//value = false;
private static bool getdisplay()
Console.WriteLine("-------------------------------------- ");
Console.WriteLine("---------------------------------------");
Console.Clear();
Console.WriteLine("----------Asset Application------------");
Console.WriteLine(" 1 Company Asset ");
Console.WriteLine(" 2 Standby Laptop Register ");
Console.WriteLine(" 3 Scrap Register ");
Console.WriteLine(" 4 Purchase Register ");
Console.WriteLine(" 5 Service Call Report ");
Console.WriteLine(" 6 IT Helpdesk ");
Console.WriteLine(" 7 Exit ");
Console.WriteLine("---------------------------------------");
string input = Console.ReadLine();
switch (input)
case "1":
CompanyAsset();
break;
case "2":
Console.WriteLine("Standy Laptop Register");
break;
case "3":
Console.WriteLine("Scrap Register");
break;
case "4":
Console.WriteLine("Purchase Register");
break;
case "5":
Console.WriteLine("Service call Report");
break;
case "6":
Console.WriteLine("IT Helpdesk");
break;
case "7":
return false;
default:
break;
return true;
private static void CompanyAsset()
Console.WriteLine("------Company Asset------------------------");
Console.WriteLine("Type the Department Name");
string departmentName = Console.ReadLine();
Console.WriteLine("Type the First Name");
string firstName = Console.ReadLine();
Console.WriteLine("Type the Last Name");
string lastName = Console.ReadLine();
Console.WriteLine("Type the User Name");
string userName = Console.ReadLine();
Console.WriteLine("Type the Model Number");
string modelNumber = Console.ReadLine();
Console.WriteLine("Type the AssetTypeID");
string assetTypeID = Console.ReadLine();
Console.WriteLine("Type the SerialNumber");
string serialNumber = Console.ReadLine();
Console.WriteLine("Type the WarrantyStartDate");
DateTime warrantyStartDate = Convert.ToDateTime(Console.ReadLine());
Console.WriteLine("Type the WarrantyEndDate");
DateTime warrantyEndDate = Convert.ToDateTime(Console.ReadLine());
Console.WriteLine("Company");
string company = Console.ReadLine();
Console.WriteLine("EngineerID");
string engineerID = Console.ReadLine();
Console.WriteLine("ITHelpdeskID");
string itHelpdeskID = Console.ReadLine();
Console.WriteLine("EmpID");
string empID = Console.ReadLine();
//Handshake
SqlConnection myNewConnection = new SqlConnection("Data Source=.\\SQLEXPRESS;AttachDbFilename=|DataDirectory|\\AssetApp.mdf;Integrated Security=True");
//open the database
myNewConnection.Open();
//create command
SqlCommand myCommand = myNewConnection.CreateCommand();
//using the stored procedue to update the database using parameters add
myCommand.CommandText = "InsertAsset";
myCommand.CommandType = CommandType.StoredProcedure;
myCommand.Parameters.Add(new SqlParameter("@DepartmentName", departmentName));
myCommand.Parameters.Add(new SqlParameter("@FirstName", firstName));
myCommand.Parameters.Add(new SqlParameter("@LastName", lastName));
myCommand.Parameters.Add(new SqlParameter("@UserName", userName));
myCommand.Parameters.Add(new SqlParameter("@ModelNumber", modelNumber));
myCommand.Parameters.Add(new SqlParameter("@AssetTypeID", int.Parse(assetTypeID)));
myCommand.Parameters.Add(new SqlParameter("@SerialNumber", serialNumber));
myCommand.Parameters.Add(new SqlParameter("@WarrantyStartDate", warrantyStartDate));
myCommand.Parameters.Add(new SqlParameter("@WarrantyEndDate", warrantyEndDate));
myCommand.Parameters.Add(new SqlParameter("@Company", company));
myCommand.Parameters.Add(new SqlParameter("@EngineerID", int.Parse(engineerID)));
myCommand.Parameters.Add(new SqlParameter("@ITHelpdeskID", int.Parse(itHelpdeskID)));
myCommand.Parameters.Add(new SqlParameter("@EmpID", int.Parse(empID)));
int recordsAffected = myCommand.ExecuteNonQuery();
if (recordsAffected == 1)
Console.WriteLine("Successful your entry");
else
Console.WriteLine("Your entry is not successful");
myNewConnection.Close();
Console.WriteLine("");
Console.WriteLine("Press Enter to continue");
Console.ReadLine();
public static void StandbyLaptopRegister()
Console.WriteLine("-------------------------------");
Console.WriteLine("Select the Date & Time");
string DateTime = Console.ReadLine();
Console.WriteLine("");
ALTER PROCEDURE dbo.InsertAsset
@DepartmentName NVARCHAR(50),
@FirstName NVARCHAR(50),
@LastName NVARCHAR(50),
@UserName NVARCHAR(50),
@ModelNumber NVARCHAR(50),
@AssetTypeID INT,
@SerialNumber NVARCHAR(50),
@WarrantyStartDate SMALLDATETIME,
@WarrantyEndDate SMALLDATETIME,
@Company NVARCHAR(50),
@EngineerID INT,
@ITHelpdeskID INT,
@EmpID INT
@parameter1 int = 5,
@parameter2 datatype OUTPUT
AS
/* SET NOCOUNT ON */
BEGIN
INSERT CompanyAsset(DepartmentName,
FirstName,
LastName,
UserName,
ModelNumber,
AssetTypeID,
SerialNumber,
WarrantyStartDate,
WarrantyEndDate,
Company,
EngineerID,
ITHelpdeskID,
EmpID)
VALUES(@DepartmentName,
@FirstName,
@LastName,
@UserName,
@ModelNumber,
@AssetTypeID,
@SerialNumber,
@WarrantyStartDate,
@WarrantyEndDate,
@Company,
@EngineerID,
@ITHelpdeskID,
@EmpID)
/*RETURN @@IDENTITY*/
END
Cheers
Sathya

Hello,
Usually when I see
AttachDbFilename=|DataDirectory| ...
The database was added into the project via the IDE add new data source and if so make sure under the property window for the database that "Copy to Output Directory" is set to either the first or last option as the default "Copy always"
copies the database each time you build the project thus overwrites the last time you ran the project.
I would recommend the "Copy if Newer" which means the database is only copied if you make changes to the database. Set "Copy if newer", build run check results.
Of course this may not be the issue but may very well be too.
Please remember to mark the replies as answers if they help and unmark them if they provide no help, this will help others who are looking for solutions to the same or similar problem.

Application not updating after JNLP changes

I have a problem that doesn't happen to all users of our application. We have our application launch via Java Web Start. We have a JNLP file that is dynamically generated for each of our customers. Once the application is installed they receive updates for the existing jar files that are listed in the JNLP file. The problem happens when we update the JNLP file "href" and "resources" to point to a different location which has the newer version of our application. It seems some people update to the latest version and others don't. This is with the same version of the JRE installed of different machines within a local network.
I have verified that the JNLP file is correct and valid by using JaNeLA.
I have even verified that the updated JNLP file is being retrieved by using Wireshark to capture the network traffic.
It seems that the java installation on some machines basically ignores the new JNLP file that is sent and continues with the existing one. We even have the update settings set to the following:
<update check="timeout" policy="always"/>
Is there something I am missing in regards as to how Java Web Start works when it recieves an updated JNLP file?
Any help would be appreciated
Thanks,
Mike

800837 wrote:
..I thought you could update the codebase value to anything you wanted as long as the "href" stays the same it treats it as the same application.To quote these two sentences from my last reply..
the JWS client would use the cached version of the codebase and href to navigate back to the version on the server. If the href has changed, that will make it a different URL (for the updated JNLP) that the JWS client will never see.If you change the term 'href' for 'codebase' in the 2nd sentence, it is still a trues and valid statement, with the same effect. The URL changes, and the JWS client considers them separate apps.
Note that I was not entirely clear when you were discussing getting different responses from the server - how you were testing that. If it was via launching the app. from the desktop/menu item shortcuts I would be very surprised. If OTOH it was directly from the server the result would not be either surprising nor useful.
But I still do not understand what the aim of all this is. What feature do you intend to offer the 'v2' clients that is different for the 'v1' clients? There is probably a better way to achieve it.

Bug? Copy page within an application not updating everything

Similar Messages

Maybe you are looking for