Bug in Oracle lib: popen failed with pthread in Redhat 6.1

Dear Oracle developers,
I need your help on this. I have used c and pthread in Redhat 6.1 and the moment I called popen, it dies. This happens only if I link some Oracle libraries. I am using ProC.
The Oracle libraries in question are
-lsql -L/export/ora01/app/oracle/product/8.0.5/lib -lc -lclntsh -lcommon -lcore4 -lnlsrtl3
I have tested this with very simple pthread
programs from Oreily even. The program dies at the call of popen if I have linked these libraries. Else it will work fine.
If anyone has a solution to that, please let me know. My email is [email protected]
Thanks.

Hi kawollek,
Thanks for the reply.
But when i tried with the example provided. I am unable to connect to oracle. it gives the error 0ra-03114 not connected to oracle.
How do i give the host string in oracle or dsn in the programe to connect to the database.
If u have tried please help me.....
Thanks & regards
Rama Raju D.S

Similar Messages

Oracle RDB Driver fails with JDBC/ODBC Bridge

Has anyone experienced problems using the latest Oracle RDB
Driver (3.0.2.0) with the JDBC/ODBC Bridge.
We have been using the Oracle ODBC Driver for RDB (2.10.17)
successfully on NT, but it is not supported on W2K. The new
drivers work fine for Access etc., but fail with the bridge.
Specifically, you can step thru a result set, but getObject()
returns null for all fields.
Any suggestions?
Joe

This forum is for general suggestions and feedback about the OTN
site. For technical question about an Oracle product, you can
select the appropriate discussion forum in our 'Discussions'
section at: http://forums.oracle.com/forums/homepage.jsp
Best regards, OTN Team

Inventory load failed... OPatch cannot load inventory for the given Oracle Home.OPatch failed with error code = 73

Hi,
I am going to apply bundle patch and my oracle database is 11.2.0.2 and platform Microsoft Windows x86. As per the read me file Oracle recommends that to use OPatch utility release 11.2.0.1.3 or later.To check the accessibility to the inventory i use %ORACLE_HOME%/OPatch/opatch lsinventory command.
It ended up with giving below details.
Invoking OPatch 11.2.0.1.1
OPatch could not create/open history file for writing : ***my oracle home path***\cfgtoollogs\opatch\opatch_history.txt
**oracle_home***\cfgtoollogs\opatch\opatch_history.txt (Access is denied)
Oracle Interim Patch Installer version 11.2.0.1.1
Copyright (c) 2009, Oracle Corporation. All rights reserved.
OPatch could not open log file, logging will not be possible
Oracle Home       : *****
Central Inventory : C:\Program Files\Oracle\Inventory
   from           : n/a
OPatch version    : 11.2.0.1.1
OUI version       : 11.2.0.2.0
OUI location      : **ORACLE_HOME***\oui
Log file location : **ORACLE_HOME**\cfgtoollogs\opatch\opatch2015-04-09_16-27-49PM.log
Patch history file: **ORACLE_HOME**\cfgtoollogs\opatch\opatch_history.txt
Inventory load failed... OPatch cannot load inventory for the given Oracle Home.
LsInventorySession failed: LsInventory cannot create the log directory **ORACLE_HOME***\cfgtoollogs\opatch\lsinv\lsinventory2015-04-
09_16-27-49PM.txt
OPatch failed with error code = 73
Can anyone please help me to solve this?
Do I need to install latest opatch utility?

Hi,
this error message " LsInventorySession failed: LsInventory cannot create the log directory **ORACLE_HOME***\cfgtoollogs\opatch\lsinv\lsinventory2015-04-
09_16-27-49PM.txt "
indicates that you have permission issue with your file systems : ORACLE_HOME/cfgtoollogs/opatch
double check the owner of this file system.
Regards,

Ridiculous bug in oracle jdeveloper compiler ojc with jdk1.4

With simple class:
public class Test
public Test()
public String toString()
return null;
public static void main(String[] args) throws Exception
Test test = new Test();
System.out.println("ooo" + test);
After compile it with ojc (ojc Test.java) and run it with jdk 1.4.1_01 (java Test), it throws
java.lang.NullPointerException
at java.lang.String.concat(String.java:1541)
But it works ok if compile it with standard java compiler(javac).

Hi,
Thanks for reporting this. It's a bug. I've logged it as 2809860, and you can track this on metalink.oracle.com.
Brian
JDev Team

Oracle 7 install fails with Windows XP SP3

After installing Windows SP3 on systems with XP Professional 32 bit, we cannot install Oracle 7.3.4, which is required for an older 16 bit program. Running the Oracle 7 setup.exe returns an error "setup.exe is not a valid Win32 application". The installer file is not corrupt, we can still run the setup successfully on any computers that still have XP Pro SP2 installed.
However, systems that had Oracle 7.3.4 installed prior to the Windows SP3 update will run the software OK; it is just new installations of Oracle 7.3.4 that fail.
I have tried running the install off of a CD, network drive, and copied the files to the local machine, all return the same error. I have tried different users all with Admin privileges. I tried installing with each compatibility mode checked, clean booting the machine, and updating Windows Installer. I always get the "setup.exe is not a valid Win32 application" error.
Any suggestions or info?
Thanks

Here is some updated information.
Systems that have been in service for a long time and updated from Windows XP Pro SP2 to SP3 will not run the Oracle 7 installer. All machines that still have SP2 will run the installer.
However, systems that we recently formatted and reinstalled Windows XP Pro with SP2, and then updated to SP3, will run the installer for Oracle 7 with SP3 already installed. This indicates that it is not SP3 that is the issue. It could be an update that was done in the past (Microsoft or another software vendor), or some different file that is on the other machines (same brand, models, and OS, just been in service without being formatted recently).
We also have Oracle 10g on all the systems, but the old CrisPlus program probably won't run with Oracle 10g, because we have to add "C:\ORAWIN\BIN" to the system Environmental Variables or we get a "Ora7win.dll" error when launching the CrisPlus program. An Oracle expert or programmer may know how to work around this issue, but I do not know how.
This does give us options to fix the Oracle 7 issue. Either rollback the SP3 update and then install CrisPlus prior to the installation of SP3, or format the systems and reinstall Windows XP Pro, Service Pack3, and Oracle 7.
Thanks for the input. If anyone thinks of an easier workaround please let me know.

Oracle R12 Clone failing with RC-00118 Error occurred during creation of...

Im encountering the above error message i have seen the below thread which looks like the same issue, i was wondering if someone could confirm if the clone process requires an off-line backup on the source system for the clone process to work. Currently i'm using a tape backup which runs overnight, the system is up at the time of backup.
RC-00118: Error occurred during creation of database
Thanks

thanks for quick response, its a hot backup.
the steps ive followed are
1. adpreclone on source
2. apps,db,inst directories deleted on destination. (after services have of course been shutdown)
3. oracle variables removed from path
4. backup restored from tape
5. deleted program files/oracle/inventory directory
6. on cmd window run set PERL5LIB=
followed by perl adcfgclone.pl dbTier
is there anything ive missed?

Oracle application server fails with jdk1.6

I have installed oracle application server 10.1.3.3, i want to use jdk1.6.0_xx. i configured in this following way
Renamed the current JDK directory used by the Application Server installation ( in our case renamed jdk under this location “/product/10.1.3.1/OracleAS_1” to jdk.orig using mv jdk jdk.orig)
Then went to this location /product/10.1.3.1/OracleAS_1 and execute “ln -s /usr/jdk/jdk1.6.0_13 jdk”
check java version from this location /product/10.1.3.1/OracleAS_1/jdk/bin use ./java –version
When i start i am getting this following error in the log file.
Unrecognized VM option 'AppendRatio=3'
Could not create the Java virtual machine.

To get it starting, remove the AppendRatio.
--olaf

Exception while using XA driver for Oracle 9.0.1 with WL Integration 7.0

java.sql.SQLException: ORA-06550: line 1, column 13:
PLS-00201: identifier 'JAVA_XA.XA_START_NEW' must be declared
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:180)
at oracle.jdbc.ttc7.TTIoer.processError(TTIoer.java:208)
at oracle.jdbc.ttc7.Oall7.receive(Oall7.java:543)
at oracle.jdbc.ttc7.TTC7Protocol.doOall7(TTC7Protocol.java:1451)
at oracle.jdbc.ttc7.TTC7Protocol.parseExecuteFetch(TTC7Protocol.java:862
at oracle.jdbc.driver.OracleStatement.executeNonQuery(OracleStatement.ja
va:1846)
at oracle.jdbc.driver.OracleStatement.doExecuteOther(OracleStatement.jav
a:1771)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStateme
nt.java:2361)
at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePrepar
edStatement.java:422)
at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStat
ement.java:487)
at oracle.jdbc.xa.client.OracleXAResource.start(OracleXAResource.java:17
9)
at weblogic.jdbc.jta.VendorXAResource.start(VendorXAResource.java:41)
at weblogic.jdbc.jta.DataSource.start(DataSource.java:569)
at weblogic.transaction.internal.ServerResourceInfo.start(ServerResource
Info.java:1165)
at weblogic.transaction.internal.ServerResourceInfo.xaStart(ServerResour
ceInfo.java:1108)
at weblogic.transaction.internal.ServerResourceInfo.enlist(ServerResourc
eInfo.java:287)
at weblogic.transaction.internal.ServerTransactionImpl.enlistResource(Se
rverTransactionImpl.java:391)
at weblogic.jdbc.jta.DataSource.enlist(DataSource.java:1143)
at weblogic.jdbc.jta.DataSource.refreshXAConnAndEnlist(DataSource.java:1
098)
at weblogic.jdbc.jta.Connection.getXAConn(Connection.java:145)
at weblogic.jdbc.jta.Connection.prepareStatement(Connection.java:211)
at weblogic.jdbc.rmi.internal.ConnectionImpl.prepareStatement(Connection
Impl.java:139)
at weblogic.jdbc.rmi.SerialConnection.prepareStatement(SerialConnection.
java:81)
at weblogic.ejb20.utils.TableVerifier.checkTableAndColumns(TableVerifier
.java:131)
at weblogic.ejb20.utils.TableVerifier.verifyTableAndColumnsExist(TableVe
rifier.java:333)
at weblogic.ejb20.utils.TableVerifier.verifyTableExistsAndCreateMaybe(Ta
bleVerifier.java:404)
at weblogic.ejb20.cmp.rdbms.RDBMSPersistenceManager.verifyTablesExist(RD
BMSPersistenceManager.java:1019)
at weblogic.ejb20.cmp.rdbms.RDBMSPersistenceManager.setup(RDBMSPersisten
ceManager.java:141)
at weblogic.ejb20.manager.BaseEntityManager.setupPM(BaseEntityManager.ja
va:214)
at weblogic.ejb20.manager.BaseEntityManager.setup(BaseEntityManager.java
:186)
at weblogic.ejb20.manager.DBManager.setup(DBManager.java:161)
at weblogic.ejb20.manager.ROManager.setup(ROManager.java:111)
at weblogic.ejb20.deployer.ClientDrivenBeanInfoImpl.activate(ClientDrive
nBeanInfoImpl.java:936)
at weblogic.ejb20.deployer.EJBDeployer.activate(EJBDeployer.java:1302)
at weblogic.ejb20.deployer.EJBModule.activate(EJBModule.java:342)
at weblogic.j2ee.J2EEApplicationContainer.activateModule(J2EEApplication
Container.java:1534)
at weblogic.j2ee.J2EEApplicationContainer.activate(J2EEApplicationContai
ner.java:991)
at weblogic.j2ee.J2EEApplicationContainer.activate(J2EEApplicationContai
ner.java:928)
at weblogic.management.deploy.slave.SlaveDeployer.setActivationStateForA
llApplications(SlaveDeployer.java:611)
at weblogic.management.deploy.slave.SlaveDeployer.resume(SlaveDeployer.j
ava:368)
at weblogic.management.deploy.DeploymentManagerServerLifeCycleImpl.resum
e(DeploymentManagerServerLifeCycleImpl.java:235)
at weblogic.t3.srvr.ServerLifeCycleList.resume(ServerLifeCycleList.java:
61)
at weblogic.t3.srvr.T3Srvr.resume(T3Srvr.java:812)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:294)
at weblogic.Server.main(Server.java:31)

Hi Raja,
I forgot this one, sorry. In fact, all you need to do is to
ask you DBA for enabling oracle instance for XA use :)
Regards,
Slava Imeshev
"Raja" <[email protected]> wrote in message
news:[email protected]...
>
Thanks a lot for response.
I tried it out but it didn't help.
I also came across a script initxa.sql (%ORAHOME%/javavm/install)which hasthe
DDL queries to create the JAVA_XA package in oracle. But iam not sure ifthis
is to be manually run on the server or if it should have been run whilethe Database
Creation was done. Any info about this would be helpful
"Slava Imeshev" <[email protected]> wrote:
Hi Raja,
Is it possible that oracle instance hasn't been set up for XA support?
Here is an extract from the documentation:
===================================================
Enable XA on the Database Server
To prepare the database for XA, perform these steps:
a.. Log on to sqlplus as system user, e.g. sqlplus
sys/CHANGE_ON_INSTALL@<DATABASE ALIAS NAME>
b.. Execute the sql: grant select on DBA_PENDING_TRANSACTIONS to public
If the above steps are not performed on the database server, normal XA
database queries and updates may work fine. However, when the Weblogic
Server Transaction Manager performs recovery on a re-boot after a crash,
recover for the Oracle resource will fail with XAER_RMERR.
===================================================
Regards,
Slava Imeshev
"Raja" <[email protected]> wrote in message
news:[email protected]...
java.sql.SQLException: ORA-06550: line 1, column 13:
PLS-00201: identifier 'JAVA_XA.XA_START_NEW' must be declared
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
atoracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:180)
at oracle.jdbc.ttc7.TTIoer.processError(TTIoer.java:208)
at oracle.jdbc.ttc7.Oall7.receive(Oall7.java:543)
at
oracle.jdbc.ttc7.TTC7Protocol.doOall7(TTC7Protocol.java:1451)
atoracle.jdbc.ttc7.TTC7Protocol.parseExecuteFetch(TTC7Protocol.java:862
atoracle.jdbc.driver.OracleStatement.executeNonQuery(OracleStatement.ja
va:1846)
atoracle.jdbc.driver.OracleStatement.doExecuteOther(OracleStatement.jav
a:1771)
atoracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStateme
nt.java:2361)
atoracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePrepar
edStatement.java:422)
atoracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStat
ement.java:487)
atoracle.jdbc.xa.client.OracleXAResource.start(OracleXAResource.java:17
9)
atweblogic.jdbc.jta.VendorXAResource.start(VendorXAResource.java:41)
at weblogic.jdbc.jta.DataSource.start(DataSource.java:569)
atweblogic.transaction.internal.ServerResourceInfo.start(ServerResource
Info.java:1165)
atweblogic.transaction.internal.ServerResourceInfo.xaStart(ServerResour
ceInfo.java:1108)
atweblogic.transaction.internal.ServerResourceInfo.enlist(ServerResourc
eInfo.java:287)
atweblogic.transaction.internal.ServerTransactionImpl.enlistResource(Se
rverTransactionImpl.java:391)
at weblogic.jdbc.jta.DataSource.enlist(DataSource.java:1143)
atweblogic.jdbc.jta.DataSource.refreshXAConnAndEnlist(DataSource.java:1
098)
at weblogic.jdbc.jta.Connection.getXAConn(Connection.java:145)
atweblogic.jdbc.jta.Connection.prepareStatement(Connection.java:211)
atweblogic.jdbc.rmi.internal.ConnectionImpl.prepareStatement(Connection
Impl.java:139)
atweblogic.jdbc.rmi.SerialConnection.prepareStatement(SerialConnection.
java:81)
atweblogic.ejb20.utils.TableVerifier.checkTableAndColumns(TableVerifier
java:131)
atweblogic.ejb20.utils.TableVerifier.verifyTableAndColumnsExist(TableVe
rifier.java:333)
atweblogic.ejb20.utils.TableVerifier.verifyTableExistsAndCreateMaybe(Ta
bleVerifier.java:404)
atweblogic.ejb20.cmp.rdbms.RDBMSPersistenceManager.verifyTablesExist(RD
BMSPersistenceManager.java:1019)
atweblogic.ejb20.cmp.rdbms.RDBMSPersistenceManager.setup(RDBMSPersisten
ceManager.java:141)
atweblogic.ejb20.manager.BaseEntityManager.setupPM(BaseEntityManager.ja
va:214)
atweblogic.ejb20.manager.BaseEntityManager.setup(BaseEntityManager.java
:186)
at weblogic.ejb20.manager.DBManager.setup(DBManager.java:161)
at weblogic.ejb20.manager.ROManager.setup(ROManager.java:111)
atweblogic.ejb20.deployer.ClientDrivenBeanInfoImpl.activate(ClientDrive
nBeanInfoImpl.java:936)
atweblogic.ejb20.deployer.EJBDeployer.activate(EJBDeployer.java:1302)
at
weblogic.ejb20.deployer.EJBModule.activate(EJBModule.java:342)
atweblogic.j2ee.J2EEApplicationContainer.activateModule(J2EEApplication
Container.java:1534)
atweblogic.j2ee.J2EEApplicationContainer.activate(J2EEApplicationContai
ner.java:991)
atweblogic.j2ee.J2EEApplicationContainer.activate(J2EEApplicationContai
ner.java:928)
atweblogic.management.deploy.slave.SlaveDeployer.setActivationStateForA
llApplications(SlaveDeployer.java:611)
atweblogic.management.deploy.slave.SlaveDeployer.resume(SlaveDeployer.j
ava:368)
atweblogic.management.deploy.DeploymentManagerServerLifeCycleImpl.resum
e(DeploymentManagerServerLifeCycleImpl.java:235)
atweblogic.t3.srvr.ServerLifeCycleList.resume(ServerLifeCycleList.java:
61)
at weblogic.t3.srvr.T3Srvr.resume(T3Srvr.java:812)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:294)
at weblogic.Server.main(Server.java:31)

HELP! Oracle FailSafe - Listener fails when adding standalone database

Well, I have a cluster of two nodes with the following specs:
(1) an Oracle 10g database each
(2) Microsoft Cluster Service (MSCS)
(3) Windows Server 2003 64-bit edition
(4) Intel Itanium Processor
(5) Oracle Failsafe 3.3.3 for Windows 2003 64-bit
The 64-bit Oracle Failsafe doesn't come with Oracle Failsafe Manager, so I used a Failsafe Manager remotely from another clustered servers. The version is also 3.3.3, but it's running on a Windows 2000 Advanced Server.
Well, after connecting to the 64-bit cluster, I added the standalone database to a Cluster Group. There are two cluster groups on the Server:
(1)"Cluster Group" (the default cluster group created by MSCS); containing an IP address, a network name, Oracle Cluster Services, and the Quorum hard drive.
(1)"ORACLE DB" A cluster gropu I created for the database; containing another IP address, a network name for the IP address, and every hard drive volumes of the database files.
The database currently resides on the Node 2 (because I created it there). I have successfully verified the database (using "Verify Standalone Database" option). BUT when I added the database into the cluster group ORACLE DB, it failed with the following message:
23 20:48:48 ** ERROR : FS-10066: Failed to start Windows service OracleOraDb10g_home1TNSListener for the Oracle Net listener
When I opened the Windows Event Viewer, apparently the Listener Service had started, but it soon "terminated unexpectedly":
At first, the Listener Service appeared to be started:
But this is what happened next; it seemed the Listener Service terminated abruptly after entering the running state for a very short time:
What happened? What should I do? What is the problem? Many thanks!
PS: the following are the messages from both Verifying Standalone Database and Adding Standalone Database. The verification was successfull, but I just failed to add the database:
>
Versions: client = 3.3.3 server = 3.3.3 OS =
Operation: Verifying standalone database "PAYMENT"
Starting Time: May 11, 2005 19:50:11
Elapsed Time: 0 minutes, 4 seconds
1 19:50:11 Starting clusterwide operation
2 19:50:11 FS-10915: POSDB2 : Starting the verification of standalone resource PAYMENT
3 19:50:11 FS-10371: POSDB2 : Performing initialization processing
4 19:50:11 FS-10371: POSDB1 : Performing initialization processing
5 19:50:12 FS-10372: POSDB2 : Gathering resource owner information
6 19:50:12 FS-10372: POSDB1 : Gathering resource owner information
7 19:50:12 FS-10373: POSDB2 : Determining owner node of resource PAYMENT
8 19:50:12 FS-10374: POSDB2 : Gathering cluster information needed to perform the specified operation
9 19:50:12 FS-10374: POSDB1 : Gathering cluster information needed to perform the specified operation
10 19:50:12 FS-10375: POSDB2 : Analyzing cluster information needed to perform the specified operation
11 19:50:12 FS-10378: POSDB2 : Preparing for configuration of resource PAYMENT
12 19:50:12 ** WARNING : FS-10247: The database parameter file H:\PAYMENT\admin\pfile\pfilePAYMENT.ora specified for this operation will override the parameter file value in the registry
13 19:50:12 ** WARNING : FS-10248: At registry key SOFTWARE\ORACLE\KEY_OraDb10g_home1, value of ORA_PAYMENT_PFILE is H:\PAYMENT\admin\pfile
14 19:50:12 FS-10916: POSDB2 : Verification of the standalone resource
15 19:50:12 > FS-10341: Starting verification of database PAYMENT
16 19:50:13 > FS-10342: Starting verification of Oracle Net configuration information for database PAYMENT
17 19:50:13 > FS-10496: Generating the Oracle Net migration plan for PAYMENT
18 19:50:13 > FS-10491: Configuring the Oracle Net service name for PAYMENT
19 19:50:13 > FS-10343: Starting verification of database instance information for database PAYMENT
20 19:50:13 >> FS-10347: Checking the state of database PAYMENT
21 19:50:13 >> FS-10425: Querying the disks used by the database PAYMENT
22 19:50:15 > FS-10344: Starting verification of Oracle Intelligent Agent for database PAYMENT
23 19:50:15 > FS-10345: Verification of standalone database PAYMENT completed successfully
24 19:50:15 FS-10917: POSDB2 : Standalone resource PAYMENT was verified successfully
25 19:50:15 FS-10378: POSDB1 : Preparing for configuration of resource PAYMENT
26 19:50:15 FS-10916: POSDB1 : Verification of the standalone resource
27 19:50:15 > FS-10341: Starting verification of database PAYMENT
28 19:50:15 > FS-10342: Starting verification of Oracle Net configuration information for database PAYMENT
29 19:50:15 > FS-10496: Generating the Oracle Net migration plan for PAYMENT
30 19:50:15 > FS-10491: Configuring the Oracle Net service name for PAYMENT
31 19:50:15 > FS-10343: Starting verification of database instance information for database PAYMENT
32 19:50:15 > FS-10344: Starting verification of Oracle Intelligent Agent for database PAYMENT
33 19:50:15 > FS-10345: Verification of standalone database PAYMENT completed successfully
34 19:50:15 FS-10917: POSDB1 : Standalone resource PAYMENT was verified successfully
35 19:50:15 The clusterwide operation completed successfully, however, the server reported some warnings.
>
Versions: client = 3.3.3 server = 3.3.3 OS =
Operation: Adding resource "PAYMENT" to group "ORACLE DATABASE"
Starting Time: May 11, 2005 20:48:43
Elapsed Time: 0 minutes, 7 seconds
1 20:48:43 Starting clusterwide operation
2 20:48:44 FS-10370: Adding the resource PAYMENT to group ORACLE DATABASE
3 20:48:44 FS-10371: POSDB2 : Performing initialization processing
4 20:48:44 FS-10371: POSDB1 : Performing initialization processing
5 20:48:45 FS-10372: POSDB2 : Gathering resource owner information
6 20:48:45 FS-10372: POSDB1 : Gathering resource owner information
7 20:48:45 FS-10373: POSDB2 : Determining owner node of resource PAYMENT
8 20:48:45 FS-10374: POSDB2 : Gathering cluster information needed to perform the specified operation
9 20:48:45 FS-10374: POSDB1 : Gathering cluster information needed to perform the specified operation
10 20:48:45 FS-10375: POSDB2 : Analyzing cluster information needed to perform the specified operation
11 20:48:45 >>> FS-10652: POSDB2 has Oracle Database version 10.1.0 installed in ORADB10G_HOME1
12 20:48:45 >>> FS-10652: POSDB1 has Oracle Database version 10.1.0 installed in ORADB10G_HOME1
13 20:48:45 FS-10376: POSDB2 : Starting configuration of resource PAYMENT
14 20:48:45 FS-10378: POSDB2 : Preparing for configuration of resource PAYMENT
15 20:48:46 FS-10380: POSDB2 : Configuring virtual server information for resource PAYMENT
16 20:48:46 ** WARNING : FS-10247: The database parameter file H:\PAYMENT\admin\pfile\pfilePAYMENT.ora specified for this operation will override the parameter file value in the registry
17 20:48:46 ** WARNING : FS-10248: At registry key SOFTWARE\ORACLE\KEY_OraDb10g_home1, value of ORA_PAYMENT_PFILE is H:\PAYMENT\admin\pfile
18 20:48:46 > FS-10496: Generating the Oracle Net migration plan for PAYMENT
19 20:48:46 > FS-10490: Configuring the Oracle Net listener for PAYMENT
20 20:48:46 >> FS-10600: Oracle Net configuration file updated: F:\ORACLE\PRODUCT\10.1.0\DB_1\NETWORK\ADMIN\LISTENER.ORA
21 20:48:46 >> FS-10606: Listener configuration updated in database parameter file: H:\PAYMENT\admin\pfile\pfilePAYMENT.ora
22 20:48:47 >> FS-10605: Oracle Net listener Fslpos created
23 20:48:48 ** ERROR : FS-10066: Failed to start Windows service OracleOraDb10g_home1TNSListener for the Oracle Net listener
24 20:48:48 ** ERROR : FS-10065: Error trying to configure the Oracle Net listener
25 20:48:48 > FS-10090: Rolling back Oracle Net changes on node POSDB2
26 20:48:50 ** ERROR : FS-10784: The Oracle Database resource provider failed to configure the virtual server for resource PAYMENT
27 20:48:50 ** ERROR : FS-10890: Oracle Services for MSCS failed during the add operation
28 20:48:50 ** ERROR : FS-10497: Starting clusterwide rollback of the operation
29 20:48:50 FS-10488: POSDB2 : Starting rollback of operation
30 20:48:50 FS-10489: POSDB2 : Completed rollback of operation
31 20:48:50 ** ERROR : FS-10495: Clusterwide rollback of the operation has been completed
32 20:48:50 Please check your Windows Application log using the Event Viewer for any additional errors
33 20:48:50 The clusterwide operation failed !

umm... help? Anyone?

Linker error: Compiling C++ code on linux platform with 64 bit oracle lib

uname -a : Linux pnl36a-4203 2.6.5-7.308.PTF.352368.0-smp #1 SMP Mon Dec 10 11:36:40 UTC 2007 x86_64 x86_64 x86_64 GNU/Linux
/app/devtools/gcc-4.2.3-64/bin/g++ -L/home/john/sdc/lib/Linux_2.6.5-7.308.PTF.352368.0-smp.gcc-4.2.3-64 -L/home/john/oracle/lib -L/app/gcc-3.3.4/lib -L/app/gcc-3.2.3/lib -ldl -lpthread -lnsl -lrt -lstdc++ -lvs -lclntsh -L/home/cdev/pkgs/oas/Linux64/oaslinux64_2_4_05_03/lib -loas Linux_2.6.5-7.308.PTF.352368.0-smp.gcc-4.2.3-64-R/db.o Linux_2.6.5-7.308.PTF.352368.0-smp.gcc-4.2.3-64-R/owl.o Linux_2.6.5-7.308.PTF.352368.0-smp.gcc-4.2.3-64-R/queue.o Linux_2.6.5-7.308.PTF.352368.0-smp.gcc-4.2.3-64-R/log.o Linux_2.6.5-7.308.PTF.352368.0-smp.gcc-4.2.3-64-R/titan.o -o /home/amehta17/sdc/bin/Linux_2.6.5-7.308.PTF.352368.0-smp.gcc-4.2.3-64/titan
/usr/bin/ld: warning: libnnz10.so, needed by /home/john/oracle/lib/libclntsh.so, not found (try using -rpath or -rpath-link)
/home/amehta17/oracle/lib/libclntsh.so: undefined reference to `nzos_ServiceWriteQueue'
/home/amehta17/oracle/lib/libclntsh.so: undefined reference to `nzosCipherSpecToStr'
/home/amehta17/oracle/lib/libclntsh.so: undefined reference to `nzos_setCRLPath'
/home/amehta17/oracle/lib/libclntsh.so: undefined reference to `nzteOpenPersona'
/home/amehta17/oracle/lib/libclntsh.so: undefined reference to `nzdsi_initialize'
All these symbols are not defined in libclntsh.so and also does not exist in libnnz10.so.
Heading 5:h5
I checked 32bit version of libnnz10.so has all above undefined symbols. This looks really weird to me why 64 bit version of libnnz10.so doesn't define these symbols.
Let me know if you have any idea.

Subsequent to your reply, I found that Openmotif is not available in Fedora, so we thought Oracle linux is best in terms of compatibility. But looks like it is not that easy to install EBS R12 on Oracle Linux also. Anyway, we installed EBS R12 on OEL-5 64 bit. Able to run forms after installing openmotif 21. Applied RUP 2. The patch application is failing to link some executables. (specifically FEMCCE, and all the executables in MSC product, MSCCPP. etc...)
Could you give some insights into this ?
Error messages:
`.gnu.linkonce.t._ZN14SimpleTreeIterI3ValEppEv' referenced in section
`.rodata' of
/home/orasfa/apps/apps_st/appl/fem/12.0.0/lib/libfem.a(FCDbCrSumExElem.o):
defined in discarded section `.gnu.linkonce.t._ZN14SimpleTreeIterI3ValEppEv'
of /home/orasfa/apps/apps_st/appl/fem/12.0.0/lib/libfem.a(FCDbCrSumExElem.o)
`.gnu.linkonce.t._ZN14SimpleTreeIterI3ValEppEv' referenced in section
`.rodata' of
/home/orasfa/apps/apps_st/appl/fem/12.0.0/lib/libfem.a(FCMathExecOp.o):
defined in discarded section `.gnu.linkonce.t._ZN14SimpleTreeIterI3ValEppEv'
of /home/orasfa/apps/apps_st/appl/fem/12.0.0/lib/libfem.a(FCMathExecOp.o)
collect2: ld returned 1 exit status
make: *** [home/orasfa/apps/apps_st/appl/fem/12.0.0/bin/FEMCCE] Error 1
Done with link of fem executable 'FEMCCE' on Wed Aug 15 11:26:06 PDT 2007
Relink of module "FEMCCE" failed.
See error messages above (also recorded in log file) for possible
------------------------------------------------------------------------------------------------------------------------------

Oracle 8.1.6 Installation fails with java.lang.NullpointerException

HI,
We are installing Oracle 8.1.6 on a D Class machine running HPUX 11.0 OS
While i start the Universal Installer, it fails with the following
error.
Warning: Missing charsets in String to FontSet conversion
Warning: Cannot convert string "-dt-interface
system-medium-r-normal-s*-*-*-*-*-*-*-*-*" to type FontSet
Warning: Missing charsets in String to FontSet conversion
Warning: Cannot convert string "-dt-interface
user-medium-r-normal-s*-*-*-*-*-*-*-*-*" to type FontSet
Exception java.lang.NullPointerException occurred..
java.lang.NullPointerException
at sun.awt.motif.MComponentPeer.setFont(MComponentPeer.java:197)
at sun.awt.motif.MFramePeer.<init>(MFramePeer.java:73)
at sun.awt.motif.MToolkit.createFrame(MToolkit.java:177)
at java.awt.Frame.addNotify(Frame.java:203)
at java.awt.Window.show(Window.java:143)
at java.awt.Component.show(Component.java:511)
at java.awt.Component.setVisible(Component.java:473)
at
oracle.sysman.oii.oiic.OiicInstaller.main(OiicInstaller.java:419)
My ORACLE_TERM is set to dtterm.
Can anybody give some suggestions what would be the problem..?
Thanks
vinod
null

Pretty much the same thing, Tomcat is the web server in CUCM, so that should have been sufficient.
Please rate all useful posts!
Chris

Import error imp-00017: following statement failed with oracle error 1659:

Hi all,
I am trying to import a file (dmp) which is of 1.63GB size,
when I type
imp
dbname/pwd@db
c:\filepath
30720
no
no
yes
yes
yes
I am getting the error imp-00017: following statement failed with oracle error 1659:
-- end it says Ora-01659 unable to allocate minextents beyond 1 in tablespace USERS
--unable to create INITIAL extent for segment in tablespace USERS
--import terminated successfully with warnings
when I looked into
select maxbytes,file_name from dba_data_files where tablespace_name='USERS';3.4360+10 c:\oracle\product\10.2.0\oradata\orcl\users01.dbf
kindly help me in solving this is.
Regards,
aak
Edited by: AAK 460425 on Apr 12, 2009 6:33 PM

Thanks,
select bytes from user_free_space where tablespace_name='USERS'
BYTES
458752
720896
458752
655360
43384832
is the size less?
My apology I have updated this in the below thread, which is same as this one.
Re: Import error

BUG in Oracle SQL Developer 3.0.04 on the "generating DLL" with comments?

I'm newbie on oracle, but I think that I found out a bug in Oracle SQL Developer version 3.0.04 on the "generating DLL" tool using "comments".
I will describe the steps that I gave:
I created a view, but after I test it I had to change my “where” condition, so I comment the old code and then I wrote the new “where” condition below. After I done that I tried to look at the sql code of my view using “generating DLL” tool, but oracle sql developer only shown me half of the code, a lot of code were missing. Then I began with some test trying to understand what happen and I notice that if I put an invalid sql code in my comment the generating DLL start working with no problems, for example(pseudo-code):
(COMMENT WITH VALID SQL CODE the "Generating SQL" don't work:)
CREATE OR REPLACE VIEW <user>.<view_name> ( <column1>,<column2> )
AS
SELECT column1, column2
FROM table1
INNER JOIN
(SELECT
FROM table2
INNER JOIN .....
INNER JOIN ....
--where time_stamp = (select max(time_stamp) from .....)
WHERE time_stamp >= TRUNC(sysdate)
) t1 ON t1.ID = ....
AND ..... >= TRUNC(sysdate)
ORDER BY ....
Generating DLL returns this(when the error occurs):
CREATE OR REPLACE VIEW <user>.<view_name> ( <column1>,<column2> )
AS
(COMMENT WITH VALID SQL CODE the "Generating SQL" work with no problems:)
CREATE OR REPLACE VIEW <user>.<view_name> ( <column1>,<column2> )
AS
SELECT column1, column2
FROM table1
INNER JOIN
(SELECT
FROM table2
INNER JOIN .....
INNER JOIN ....
--where
WHERE time_stamp >= TRUNC(sysdate)
) t1 ON t1.ID = ....
AND ..... >= TRUNC(sysdate)
ORDER BY ....
I believe that "Generating DLL" tool have some problem with the comments, I also used /*...*/ to comment but the problem is still active.
I notice as well that if I started to add some more comments along the code, the conditions migth change, so I think the problem is related with "comments" code.
Would you mind telling me if this is a real bug or if I'm doing anything wrong.
Thank you in advance,
Rodrigo Campos
Edited by: 894886 on 3/Nov/2011 5:29

Hi Rodrigo,
Thank you for reporting this. The only bug I see currently logged on a comment affecting the generated View DDL involves ending the last line of the definition with a comment, which treats the ending semi-colon (even if on a different line) as part of the comment. That is actually related to a low-priority bug against an Oracle database API.
Unfortunately, your pseudo-code is a bit complex. Trying a few quick, simpler tests against the standard HR schema did not reproduce the issue. I tried INNER JOIN, and nested SELECTs. It would help greatly if you could provide a test case compilable against one of the standard schema, like HR or SCOTT.
Regards,
Gary
SQL Developer Team

Dbconsole config in oracle apps 12i (db 11.1.0.7) failed with emca

Dear all,
I started configuring dbconsole for oracle apps 12 with oracle 11.1.0.7 database using emca.
It failed while supplying dbsnmp password.
CONFIG: Failed to update account status.
oracle.sysman.assistants.util.sqlEngine.SQLFatalErrorException: ORA-01034: ORACL
E not available
I changed the password manually using alter user cmd and tried to confiure it but it doesn't work.
I restarted the db tier and tried to configure it but with same error.checked the password policy for profile its unlimited.
I don't understand what is wrong.
Can someone throw some light on this.
Thanks & regards,

Have you changed the password correctly? If yes, can you login using the new password via SQL*Plus?
Please see these docs.
EMCA Fails With Error "ORA-01034: ORACLE not available" and "Invalid username/password." For DBSNMP User [ID 550484.1]
How to Troubleshoot EMCA Failures Due to Connectivity Issue to Database [ID 1106623.1]
If none of the above helps, please log a SR.
Thanks,
Hussein

Patch 9655006 failed with code 135 when applying to Oracle Restart

Hi all,
I install Oracle RAC single node version 11.2.0.1 on Linux (kernel 2.6.18).
I try to apply patch 9655006 (prerequis for upgrade to 11.2.0.2).
Everything is OK for grid applying with success.
When I apply this patch to oracle db home, I get :
Oracle Interim Patch Installer version 11.2.0.1.5
Copyright (c) 2010, Oracle Corporation. All rights reserved.
Argument(s) Error... Given 'ocmrf' file does not exists.
Please check the arguments and try again.
OPatch failed with error code 135
I've given the complete path and filename (same as for grid applying).
I've found A document [ID 1283954.1], but not useful in my case.
Any ideas for workaround ?
TIA
yang
ps. this does not occur when applying to a RAC with 2 nodes.

yang wrote:
Hi all,
I install Oracle RAC single node version 11.2.0.1 on Linux (kernel 2.6.18).
I try to apply patch 9655006 (prerequis for upgrade to 11.2.0.2).
Everything is OK for grid applying with success.
When I apply this patch to oracle db home, I get :
Oracle Interim Patch Installer version 11.2.0.1.5
Copyright (c) 2010, Oracle Corporation. All rights reserved.
Argument(s) Error... Given 'ocmrf' file does not exists.
Please check the arguments and try again.
OPatch failed with error code 135
I've given the complete path and filename (same as for grid applying).
I've found A document [ID 1283954.1], but not useful in my case.
Any ideas for workaround ?
TIA
yang
ps. this does not occur when applying to a RAC with 2 nodes.Hello Yang,
Could you try it again with debug info? Before you run the opatch, run the following:
$ set OPATCH_DEBUG=TRUE; export OPATCH_DEBUG
Regards
Gokhan

Bug in Oracle lib: popen failed with pthread in Redhat 6.1

Similar Messages

Maybe you are looking for