HELP! Oracle FailSafe - Listener fails when adding standalone database

Well, I have a cluster of two nodes with the following specs:
(1) an Oracle 10g database each
(2) Microsoft Cluster Service (MSCS)
(3) Windows Server 2003 64-bit edition
(4) Intel Itanium Processor
(5) Oracle Failsafe 3.3.3 for Windows 2003 64-bit
The 64-bit Oracle Failsafe doesn't come with Oracle Failsafe Manager, so I used a Failsafe Manager remotely from another clustered servers. The version is also 3.3.3, but it's running on a Windows 2000 Advanced Server.
Well, after connecting to the 64-bit cluster, I added the standalone database to a Cluster Group. There are two cluster groups on the Server:
(1)"Cluster Group" (the default cluster group created by MSCS); containing an IP address, a network name, Oracle Cluster Services, and the Quorum hard drive.
(1)"ORACLE DB" A cluster gropu I created for the database; containing another IP address, a network name for the IP address, and every hard drive volumes of the database files.
The database currently resides on the Node 2 (because I created it there). I have successfully verified the database (using "Verify Standalone Database" option). BUT when I added the database into the cluster group ORACLE DB, it failed with the following message:
23 20:48:48 ** ERROR : FS-10066: Failed to start Windows service OracleOraDb10g_home1TNSListener for the Oracle Net listener
When I opened the Windows Event Viewer, apparently the Listener Service had started, but it soon "terminated unexpectedly":
At first, the Listener Service appeared to be started:
But this is what happened next; it seemed the Listener Service terminated abruptly after entering the running state for a very short time:
What happened? What should I do? What is the problem? Many thanks!
PS: the following are the messages from both Verifying Standalone Database and Adding Standalone Database. The verification was successfull, but I just failed to add the database:
>
Versions: client = 3.3.3 server = 3.3.3 OS =
Operation: Verifying standalone database "PAYMENT"
Starting Time: May 11, 2005 19:50:11
Elapsed Time: 0 minutes, 4 seconds
1 19:50:11 Starting clusterwide operation
2 19:50:11 FS-10915: POSDB2 : Starting the verification of standalone resource PAYMENT
3 19:50:11 FS-10371: POSDB2 : Performing initialization processing
4 19:50:11 FS-10371: POSDB1 : Performing initialization processing
5 19:50:12 FS-10372: POSDB2 : Gathering resource owner information
6 19:50:12 FS-10372: POSDB1 : Gathering resource owner information
7 19:50:12 FS-10373: POSDB2 : Determining owner node of resource PAYMENT
8 19:50:12 FS-10374: POSDB2 : Gathering cluster information needed to perform the specified operation
9 19:50:12 FS-10374: POSDB1 : Gathering cluster information needed to perform the specified operation
10 19:50:12 FS-10375: POSDB2 : Analyzing cluster information needed to perform the specified operation
11 19:50:12 FS-10378: POSDB2 : Preparing for configuration of resource PAYMENT
12 19:50:12 ** WARNING : FS-10247: The database parameter file H:\PAYMENT\admin\pfile\pfilePAYMENT.ora specified for this operation will override the parameter file value in the registry
13 19:50:12 ** WARNING : FS-10248: At registry key SOFTWARE\ORACLE\KEY_OraDb10g_home1, value of ORA_PAYMENT_PFILE is H:\PAYMENT\admin\pfile
14 19:50:12 FS-10916: POSDB2 : Verification of the standalone resource
15 19:50:12 > FS-10341: Starting verification of database PAYMENT
16 19:50:13 > FS-10342: Starting verification of Oracle Net configuration information for database PAYMENT
17 19:50:13 > FS-10496: Generating the Oracle Net migration plan for PAYMENT
18 19:50:13 > FS-10491: Configuring the Oracle Net service name for PAYMENT
19 19:50:13 > FS-10343: Starting verification of database instance information for database PAYMENT
20 19:50:13 >> FS-10347: Checking the state of database PAYMENT
21 19:50:13 >> FS-10425: Querying the disks used by the database PAYMENT
22 19:50:15 > FS-10344: Starting verification of Oracle Intelligent Agent for database PAYMENT
23 19:50:15 > FS-10345: Verification of standalone database PAYMENT completed successfully
24 19:50:15 FS-10917: POSDB2 : Standalone resource PAYMENT was verified successfully
25 19:50:15 FS-10378: POSDB1 : Preparing for configuration of resource PAYMENT
26 19:50:15 FS-10916: POSDB1 : Verification of the standalone resource
27 19:50:15 > FS-10341: Starting verification of database PAYMENT
28 19:50:15 > FS-10342: Starting verification of Oracle Net configuration information for database PAYMENT
29 19:50:15 > FS-10496: Generating the Oracle Net migration plan for PAYMENT
30 19:50:15 > FS-10491: Configuring the Oracle Net service name for PAYMENT
31 19:50:15 > FS-10343: Starting verification of database instance information for database PAYMENT
32 19:50:15 > FS-10344: Starting verification of Oracle Intelligent Agent for database PAYMENT
33 19:50:15 > FS-10345: Verification of standalone database PAYMENT completed successfully
34 19:50:15 FS-10917: POSDB1 : Standalone resource PAYMENT was verified successfully
35 19:50:15 The clusterwide operation completed successfully, however, the server reported some warnings.
>
Versions: client = 3.3.3 server = 3.3.3 OS =
Operation: Adding resource "PAYMENT" to group "ORACLE DATABASE"
Starting Time: May 11, 2005 20:48:43
Elapsed Time: 0 minutes, 7 seconds
1 20:48:43 Starting clusterwide operation
2 20:48:44 FS-10370: Adding the resource PAYMENT to group ORACLE DATABASE
3 20:48:44 FS-10371: POSDB2 : Performing initialization processing
4 20:48:44 FS-10371: POSDB1 : Performing initialization processing
5 20:48:45 FS-10372: POSDB2 : Gathering resource owner information
6 20:48:45 FS-10372: POSDB1 : Gathering resource owner information
7 20:48:45 FS-10373: POSDB2 : Determining owner node of resource PAYMENT
8 20:48:45 FS-10374: POSDB2 : Gathering cluster information needed to perform the specified operation
9 20:48:45 FS-10374: POSDB1 : Gathering cluster information needed to perform the specified operation
10 20:48:45 FS-10375: POSDB2 : Analyzing cluster information needed to perform the specified operation
11 20:48:45 >>> FS-10652: POSDB2 has Oracle Database version 10.1.0 installed in ORADB10G_HOME1
12 20:48:45 >>> FS-10652: POSDB1 has Oracle Database version 10.1.0 installed in ORADB10G_HOME1
13 20:48:45 FS-10376: POSDB2 : Starting configuration of resource PAYMENT
14 20:48:45 FS-10378: POSDB2 : Preparing for configuration of resource PAYMENT
15 20:48:46 FS-10380: POSDB2 : Configuring virtual server information for resource PAYMENT
16 20:48:46 ** WARNING : FS-10247: The database parameter file H:\PAYMENT\admin\pfile\pfilePAYMENT.ora specified for this operation will override the parameter file value in the registry
17 20:48:46 ** WARNING : FS-10248: At registry key SOFTWARE\ORACLE\KEY_OraDb10g_home1, value of ORA_PAYMENT_PFILE is H:\PAYMENT\admin\pfile
18 20:48:46 > FS-10496: Generating the Oracle Net migration plan for PAYMENT
19 20:48:46 > FS-10490: Configuring the Oracle Net listener for PAYMENT
20 20:48:46 >> FS-10600: Oracle Net configuration file updated: F:\ORACLE\PRODUCT\10.1.0\DB_1\NETWORK\ADMIN\LISTENER.ORA
21 20:48:46 >> FS-10606: Listener configuration updated in database parameter file: H:\PAYMENT\admin\pfile\pfilePAYMENT.ora
22 20:48:47 >> FS-10605: Oracle Net listener Fslpos created
23 20:48:48 ** ERROR : FS-10066: Failed to start Windows service OracleOraDb10g_home1TNSListener for the Oracle Net listener
24 20:48:48 ** ERROR : FS-10065: Error trying to configure the Oracle Net listener
25 20:48:48 > FS-10090: Rolling back Oracle Net changes on node POSDB2
26 20:48:50 ** ERROR : FS-10784: The Oracle Database resource provider failed to configure the virtual server for resource PAYMENT
27 20:48:50 ** ERROR : FS-10890: Oracle Services for MSCS failed during the add operation
28 20:48:50 ** ERROR : FS-10497: Starting clusterwide rollback of the operation
29 20:48:50 FS-10488: POSDB2 : Starting rollback of operation
30 20:48:50 FS-10489: POSDB2 : Completed rollback of operation
31 20:48:50 ** ERROR : FS-10495: Clusterwide rollback of the operation has been completed
32 20:48:50 Please check your Windows Application log using the Event Viewer for any additional errors
33 20:48:50 The clusterwide operation failed !

umm... help? Anyone?

Similar Messages

Failsafe listener fail TNS-12532

Have upgraded Oracle from 9.2.0.4 to 9.2.0.8 on a microsft clustered system . The database will not start on one of the two servers in cluster , with a failsafe listener fail of TNS-12532 - TNS:Invalid argument .
The listerner.ora has not been changed for 5 years and is exactly the same on each of the two servers in the cluster . Oracle starts properly on th other server .
Any ideas or directions to go .

invalid parameter in listerner.or on one side . 9.2.0.4 overlooked the error, 9.2.0.8 fails though does not report line in error . commented out the invalid argument and all started ok

CloudControl 12c: when adding cluster-database single instances are missing

Hello ,
I'e have installed the agent 12c on every single host of our RAC. When adding a database to CloudControl 12c just the RAC-instance gets discovered - but not the single database instances on each host.
Due to this when clicking targets -> databases I just see the cluster-database - but not every single instance of the database.
Compared to another RAC database this is totally different behaviour.
Any help will be appreciated
Rgds
JH

Hello ,
maybe I should try to explain the issue a little bit clearer...
We have one RAC database called PROD02. When clicking "targets -> databases" I see the following:
PROD02 of type Cluster Database
PROD021 of type Database Instance
PROD022 of type Database Instance
That's the way it shoudl be - that's the way I expected it...
For the newly cofgured RAC database, called PREP02, it looks different when clicking "targets -> databases"
PREP02 of type Cluster Database
The single instances don't show up. Of course I see the single instances when clicking on "PREP02" under the item "Instances".
Now I wonder why these two RAC databases are differently displayed when clicking "targets -> databases". When trying to add the single instances (clicking "Add" under "targets -> databases") and selecting then either "only on the host <hostname>" or "on all hosts in the cluster" no single instances are found or displayed...
Rgds
Jan

Adding Standalone Database to Group using Fail Safe fails

Background:
Oracle: 10.2.0.4
OFS: 3.4.1
Have installed Oracle Fail Safe correctly without errors.
Ran Verify Standalone Database get this result:
27 10:00:04 > FS-10345: Verification of standalone database MYDB completed successfully
28 10:00:04 FS-10917: Server01A : Standalone resource MYDB was verified successfully
29 10:00:04 FS-10378: Server01B : Preparing for configuration of resource MYDB
30 10:00:04 FS-10916: Server01B : Verification of the standalone resource
31 10:00:04 > FS-10341: Starting verification of database MYDB
32 10:00:04 > FS-10342: Starting verification of Oracle Net configuration information for database MYDB
33 10:00:04 > FS-10496: Generating the Oracle Net migration plan for MYDB
34 10:00:04 > FS-10491: Configuring the Oracle Net service name for MYDB
35 10:00:04 > FS-10343: Starting verification of database instance information for database MYDB
36 10:00:04 > FS-10344: Starting verification of Oracle Intelligent Agent for database MYDB
37 10:00:04 > FS-10345: Verification of standalone database MYDB completed successfully
38 10:00:04 FS-10917: Server01B : Standalone resource MYDB was verified successfully
39 10:00:04 The clusterwide operation completed successfully, however, the server reported some warnings.
The warnings are concerning dome files that are on the D: drive as oppose to one of the Shared Drives. I made that that the SPFILE and init.ora are on the o1B node and in the same exact Path.
I did create a Group with a Virtual Address and added the Shared Drive resources
When I run the "Add to Group" wizard, I have tried using both the SPFILE and the 'init.ora' and get the same result:
20 10:02:58 >> FS-10605: Oracle Net listener Fslmydbdb created
21 10:02:59 >> FS-10602: Oracle Net listener LISTENER restarted
22 10:02:59 > FS-10491: Configuring the Oracle Net service name for MYDB
23 10:02:59 >> FS-10600: Oracle Net configuration file updated: D:\ORACLE\PRODUCT\10.2.0\DB_1\NETWORK\ADMIN\TNSNAMES.ORA
24 10:02:59 FS-10381: Server01A : Creating the resource information for resource MYPLM
25 10:02:59 > FS-10424: Checking whether the database MYDB is online
26 10:03:07 ** ERROR : FS-10778: The Oracle Database resource provider failed to configure the cluster resource MYDB
27 10:03:07 ** ERROR : FS-10890: Oracle Services for MSCS failed during the add operation
28 10:03:07 ** ERROR : FS-10497: Starting clusterwide rollback of the operation
29 10:03:07 FS-10488: Server01A : Starting rollback of operation
30 10:03:07 > FS-10090: Rolling back Oracle Net changes on node Server01A
31 10:03:10 FS-10489: Server01A : Completed rollback of operation
32 10:03:10 ** ERROR : FS-10495: Clusterwide rollback of the operation has been completed
33 10:03:10 Please check your Windows Application log using the Event Viewer for any additional errors
34 10:03:10 The clusterwide operation failed !
I have checked the README files and looked up the FS- Errors, but they are very general and don't give me a clue as towhy they failed.
Have been Googleing for days and found no answer yet. Are there any other logs that might shed some light on this?
Thanks and have a great day,
Andrew

Additional info.....here's wha tI found on the D:\oracle\product\10.2.0\db_1\log\Server01a\client logs:
clsc78.log
Oracle Database 10g CRS Release 10.2.0.4.0 Production Copyright 1996, 2008 Oracle. All rights reserved.
2009-05-27 13:12:43.942: [ OCROSD][2272]utgdv:1:could not open registry key SOFTWARE\Oracle\ocr os error The system could
not find the environment option that was entered.
2009-05-27 13:12:43.942: [ OCRRAW][2272]proprinit: Could not open raw device
2009-05-27 13:12:43.942: [ default][2272]a_init:7!: Backend init unsuccessful : [33]
2009-05-27 13:12:43.942: [ CSSCLNT][2272]clsssinit: error(33 ) in OCR initialization
2009-05-27 13:12:45.036: [ OCROSD][2272]utgdv:1:could not open registry key SOFTWARE\Oracle\ocr os error The system could
not find the environment option that was entered.
2009-05-27 13:12:45.036: [ OCRRAW][2272]proprinit: Could not open raw device
2009-05-27 13:12:45.036: [ default][2272]a_init:7!: Backend init unsuccessful : [33]
CSS41.log
Oracle Database 10g CRS Release 10.2.0.4.0 Production Copyright 1996, 2008 Oracle. All rights reserved.
2009-05-27 13:12:50.833: [ OCROSD][3508]utgdv:1:could not open registry key SOFTWARE\Oracle\ocr os error The system could
not find the environment option that was entered.
2009-05-27 13:12:50.833: [ OCRRAW][3508]proprinit: Could not open raw device
2009-05-27 13:12:50.833: [ default][3508]a_init:7!: Backend init unsuccessful : [33]
2009-05-27 13:12:50.833: [ CSSCLNT][3508]clsssinit: error(33 ) in OCR initialization
Related? To me it looks like it initilaizes everything, stop the Database, but then can't startup?
Thanks..
Andrew

Listener fails when not connected with network .

Hi ,
this again same old problem of listener.
I have installed oracle 8 on my home pc RUNNING WIN2000 SP 4.
The listenet runs fine when I am connected to the internet through dialup CONNECTION but fails when I am not connected .
I donnt have a network adapter with my pc.
How caN i run listener on a stand alone system ?
the computer name is kabilpc
Following error is spitted when I give start command from LSNRCTL80
System parameter file is d:\orant\NET80\admin\listener.or
Log messages written to d:\orant\NET80\log\listener.log
Listening on: (ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\O
Listening on: (ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\E
Listening on: (ADDRESS=(PROTOCOL=nmp)(PIPENAME=\\KABILPC\
Listening on: (ADDRESS=(PROTOCOL=tcp)(DEV=392)(HOST=127.0
Listening on: (ADDRESS=(PROTOCOL=tcp)(DEV=404)(HOST=127.0
Attempted to listen on: (DESCRIPTION=(CONNECT_TIMEOUT=10)
(HOST=127.0.0.1)(PORT=1520)))
TNS-12542: TNS:address already in use
TNS-12560: TNS:protocol adapter error
TNS-00512: Address already in use
32-bit Windows Error: 48: Unknown system error
THE FOLLOWING IS THE CONTENT OF LISTENER.ORA
# D:\ORANT\NET80\ADMIN\LISTENER.ORA Configuration File:d:\orant\net80\admin\listener.ora
# Generated by Oracle Net8 Assistant
PASSWORDS_LISTENER= (oracle)
LISTENER =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = ORCL))
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
(ADDRESS = (PROTOCOL = NMP)(SERVER = KABILPC)(PIPE = ORAPIPE))
(ADDRESS = (PROTOCOL = TCP)(HOST = kabilpc)(PORT = 1520))
(ADDRESS = (PROTOCOL = TCP)(HOST = kabilpc)(PORT = 9999))
(ADDRESS = (PROTOCOL = TCP)(HOST = 127.0.0.1)(PORT = 1520))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = kabilpc)
(SID_NAME = ORCL)
(SID_DESC =
(SID_NAME = extproc)
(PROGRAM = extproc)
THANKS
K.M.DHALI

(ADDRESS = (PROTOCOL = TCP)(HOST = kabilpc)(PORT = 1520))
(ADDRESS = (PROTOCOL = TCP)(HOST = 127.0.0.1)(PORT =1520))Are these two entries not one and the same? Could you get rid of one of the entries and try.

Error when adding a database

Hi
I keep getting this error "Index was outside the bounds of the array. (microsoft.SQLserver.Smo)" when adding a new database.
How can I fix this
Thanks

Hi,
What version of SQL Server are you on? What version of SSMS?
Thanks, Andrew
My blog...

"Program terminated in remote system NONE: Logon failed" when adding a new table

Hello,
I set up a replication flow from a SAP ERP 6.0 EHP7 with SAP ASE 16.0 source to SAP HANA 1.0 rev 82 target
I am using a standalone SLT system NetWeaver 7.0 with DMIS 2011_1_731 (with SP 1 to 7).
I have 100 tables to replicate.
I succeeded to set up replication for 57 tables. These tables are replicating properly.
Whenever I try to add a new one (with LTRC transaction, Data Provisioning -> Start Replication), the new table is marked as 'Failed' after a little while.
When I press 'Show Error Log' button I got an obscure error message:
"Program terminated in remote system NONE: Logon failed "
I do not understand this message. I checked both on SAP ASE source and SAP HANA target. I am still able to connect against both source and target.
Can you please tell how to troubleshoot this error.
Thanks in advance,
Christian

First thank you for answering my questions. I really appreciate your answers.
I rechecked the documentation.
"Application Operations Guide SAP Landscape Transformation Replication Server Document Version: 2.3 – 2014-07-08"
Page 29 - 30
3.5.2.2 Data Transfer Jobs
This section explains the relationship between the number of data transfer jobs and the number of available background work process.
Data transfer and data transformation processing on SLT server system is accomplished by the background work processes of the underlying SAP NetWeaver ABAP application server. Each job occupies 1 background work process in the SAP LT Replication Server system. For each configuration, the parameter Data Transfer Jobs restricts the maximum number of data load job for each mass transfer ID (MT_ID). In total, a mass transfer ID (MT_ID) requires at least 4 background jobs to be available:
 One monitoring job (master job)
 One master controller job
 At least one data load job
 One additional job either for the migration objects definition, access plan calculation or to change configuration settings in the Configuration & Monitoring Dashboard
Example
If you set the parameter Data Transfer Jobs to 04 in a configuration “SCHEMA1”, a mass transfer ID 001 is assigned. As a result, the following jobs should be in the system:
1 Master controller job: /1LT/IUC_REP_CNTR_001
 At most 4 parallel jobs for MT_ID 001: /1LT/IUC_LOAD_MT_001_001/~002/~003/~004
When configuring your data load or replication scenario, consider the following:
 Do not define more data transfer jobs than the number of available application server background work processes. If all available background work processes are already occupied by jobs, any other job will have to wait until a free work process becomes available. This can lead to long wait times until a new activity (for example creating triggers) can start, and can also result in significantly increased latency times for data replication.
 The number of dialog work processes in the source system corresponds 1:1 with the number of data transfer jobs in the SAP LT Replication Server system.
 Besides the work processes allocated by the data transfer jobs you need to provide additional available work processes for controller and monitoring jobs, the migration objects definition, access plan calculation or to perform configuration changes, and so on.
Sizing for SAP LT Replication Server involves determining how many work processes are required to perform the initial load of data into the target system within an acceptable timeframe, and accomplish the change capturing and the transfer of data changes to the target system within expected latency times.
Ensure that you add enough additional work processes to allow other required SAP LT Replication Server jobs to run.
Finally, you map the number of required application server work processes to their system resource consumption (CPU, memory, disc space) using the formulas provided by the SLT Sizing Guide.
With the simple formula below, you can calculate the number of required application server work processes (WPs) on the SLT Server for each active SLT configuration.
The number of required work processes can be determined by adding
 The Number of required data transfer jobs ,
 plus one background work process for Central Master (Monitoring) Job (only one per system!),
 plus one background work process for Master Controller Job,
 plus 3-5 additional empty background work processes (recommended per configuration),
 plus approx. 3 dialog work processes (recommended for each configuration).
Note: A lack of available free application server work processes can negatively affect the data load or data replication processes.
To summarize everything, the number of 'Data Transfer Jobs' must be set depending of the number of source tables, it is not the actual number of tables.
Assume that for my 100 tables I use 10 'Data Transfer Jobs' :
- The number of work processes on the SLT server would be 20. I took the simple formula of the documentation:
10 data transfer jobs ,
+ 1 background work process for Central Master (Monitoring) Job (only one per system!),
+ 1 background work process for Master Controller Job,
+ 5 additional empty background work processes (recommended per configuration),
+ 3 dialog work processes (recommended for each configuration).
- The number of dialog processes on the source server would be 10 ( equal to the number of 'Data Transfer Jobs')
Am I correct ?
Regards,
Christian

Update failed when adding email

Hi please can someone help me. I have a curve 9320 and had my work emails and hot mail on my phone. My work emails stopped coming through and after attempting to fix the issue, I deleted my work emails from my phone. When I try to add the work email again it keeps saying update failed. The IT dept said I need to change the mail server settings. Does anyone know how to do this or even if this is what the issue is? Thanks

Hi and Welcome to the Community!
Is your work email account a BES/Enterprise account? Were you able to, with that, synchronize wirelessly calendar, contacts, tasks, and memos? If so, then your IT folks must resolve this BES activation issue.
If you only had email, then it likely was not BES, and instead acted just like any other "personal/internet" email account. But, I cannot quite tell what you are doing and what your IT department is recommending.
If you are using the on-device email wizard and providing only the email address and password yet it is still failing, then that could be what they are referring to. If the server does not respond with the proper server settings (e.g., port, server address, etc.), then the wizard will indeed fail.
To bypass the wizard and force the ability for you to provide those additional details, you need to provide a correct email address, but an intentionally incorrect password. When the screen repaints, the same fields will be visible, but an additional "tic box" for "I will provide these settings myself" (or something similar) will be added...tic that box and proceed, and you will be presented with a screen on which you can manually enter all of the necessary details.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Management Studio Fails when added Integration Services step to SQL Server Agent Job

Hi,
I have two new servers I've setup with Windows Server 2012, SQL Server 2012 SP1, Visual Studio 2012 SP4. I've previously been on SQL 2008 and VS 2008 so this is new to me.
I am finding SSMS is throwing an exception on both machines when i do the following:
1. Go to SQL Server Agent | Jobs
2. Create a new Job.
3. Select Steps and click New Step
4. Change the job type to SQL Server Integration Services Package.
Following error occurs:
TITLE: Microsoft SQL Server Management Studio
The type initializer for '<Module>' threw an exception. (SqlManagerUI)
ADDITIONAL INFORMATION:
The C++ module failed to load.
(DTEParseMgd)
Index was outside the bounds of the array. (DTEParseMgd)
I also find if I take an existing job with SSIS package steps and attempt to edit those steps the same message appears. This issue happens on both my servers as they have been configured almost identically. This doesn't occur when selecting any other job
type.
I've also tried installing cumulative update 8 in a hope that this may fix it but with no success.
As my entire environment is based around SQL Agents running SSIS i'm a little bit concerned, especially since I have some tight deadlines getting these servers running.
I have found nothing relating to this issue. Any help greatly appreciated.
Simon
Below is the detailed error message:
===================================
The type initializer for '<Module>' threw an exception. (SqlManagerUI)
Program Location:
   at Microsoft.SqlServer.Management.SqlManagerUI.DTSJobSubSystemDefinition.Microsoft.SqlServer.Management.SqlManagerUI.IJobStepPropertiesControl.Load(JobStepData data)
   at Microsoft.SqlServer.Management.SqlManagerUI.JobStepProperties.UpdateJobStep()
   at Microsoft.SqlServer.Management.SqlManagerUI.JobStepProperties.typeList_SelectedIndexChanged(Object sender, EventArgs e)
   at System.Windows.Forms.ComboBox.OnSelectedIndexChanged(EventArgs e)
   at System.Windows.Forms.ComboBox.set_SelectedIndex(Int32 value)
   at System.Windows.Forms.ComboBox.set_SelectedItem(Object value)
   at Microsoft.SqlServer.Management.SqlManagerUI.JobStepProperties.InitializeStepCombo()
   at Microsoft.SqlServer.Management.SqlManagerUI.JobStepProperties.InitializeData()
   at Microsoft.SqlServer.Management.SqlManagerUI.JobStepProperties.OnInitialization()
   at Microsoft.SqlServer.Management.SqlMgmt.ViewSwitcherControlsManager.SetView(Int32 index, TreeNode node)
   at Microsoft.SqlServer.Management.SqlMgmt.ViewSwitcherControlsManager.SelectCurrentNode()
   at Microsoft.SqlServer.Management.SqlMgmt.ViewSwitcherControlsManager.InitializeUI(ViewSwitcherTreeView treeView, ISqlControlCollection viewsHolder, Panel rightPane)
   at Microsoft.SqlServer.Management.SqlMgmt.LaunchForm.InitializeForm(XmlDocument doc, IServiceProvider provider, ISqlControlCollection control)
   at Microsoft.SqlServer.Management.SqlMgmt.LaunchForm..ctor(ISqlControlCollection control, IServiceProvider provider)
   at Microsoft.SqlServer.Management.SqlManagerUI.JobSteps.editJobStep_Click(Object sender, EventArgs e)
   at System.Windows.Forms.Control.OnClick(EventArgs e)
   at System.Windows.Forms.Button.OnClick(EventArgs e)
   at System.Windows.Forms.Button.OnMouseUp(MouseEventArgs mevent)
   at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
   at System.Windows.Forms.Control.WndProc(Message& m)
   at System.Windows.Forms.ButtonBase.WndProc(Message& m)
   at System.Windows.Forms.Button.WndProc(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
   at System.Windows.Forms.NativeWindow.DebuggableCallback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
   at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg)
   at System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(IntPtr dwComponentID, Int32 reason, Int32 pvLoopData)
   at System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context)
   at System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context)
   at System.Windows.Forms.Application.RunDialog(Form form)
   at System.Windows.Forms.Form.ShowDialog(IWin32Window owner)
   at System.Windows.Forms.Form.ShowDialog()
   at Microsoft.SqlServer.Management.SqlMgmt.RunningFormsTable.RunningFormsTableImpl.ThreadStarter.StartThread()
===================================
The C++ module failed to load.
(DTEParseMgd)
Program Location:
   at <CrtImplementationDetails>.LanguageSupport.Initialize(LanguageSupport* )
   at .cctor()
===================================
Index was outside the bounds of the array. (DTEParseMgd)
Program Location:
   at _getFiberPtrId()

Hi,
I hadn't installed CU3 however as a test i tried installing CU4 and this didn't help. Since my first emails i have more issues that have brought a complete hault to the upgrade project.
If i double click on a package to run it manually I basically get the same issue. This means i have no way of running any packages except throught VS.
I've also found that regardless of the order of the software installs it still fails. It's related to SP1 of SQL and SP4 of VS.
I'm on Server 2012. When install in the following order SQL 2012, SQL SP1, VS2012, BIDS, VS SP4 i have no problem until VS SP4 is installed. If i install VS SP4 then BIDS it also fails at the last step. If i install all the VS and BIDS software first, then
SQL then SQL SP1 it fails at the SQL SP1 step.
This means i could actually install everything and either ignore the SQL SP1 or the VS SP4 and i'd be fine however this is not really a solution as i will never be able to patch the software and once live this is very dangerous.
I am still surprised there is no obvious solution to this. I'm only installing MS software on a fresh box and only installing 5 pieces of software (including the SPs). I would have though if this was an issue others would have come across it too.
Has anyone else installed all these components and got them working on the same OS. I believe early on in my testing i installed these in Windows Server 2008 and didn't have the issue.
Regards.
Simon.

Curve 9300 "Update failed" when adding second email address

Device info
Your carrier: Partner Israel
Model info and OS version (Go to Settings, then Options, then about): 9300 6.0.0.668
Add above to you profile if you dont wat to type it in all the time.
Apps and free space
File free before and after a battery remove/replace. (Go to Settings, then Options, then status): 68.1 MB
Did a battery pull fix your issue? NO
Apps installed and their version if possible. (Go to Settings, then Options, then applications): Zello; Google talk; Email setup; Brickbreaker; Browser
BT device model/version (you will have to look at the BT device):
When writing your question
Any other details that would help us out with your issue: Reregistering with blackberry network did not work
Good description of what is really wrong and how to reproduce if possible. Details of what you did before:
Trying to add three email addresses. The first one always works, the second one always fails with "Update failed" message. If I delete teh first one I can add the second, but I can never add an address when one is already set up. Talking to Orange (Partner) didn't work. Security wipe didn't work.

Contact again your service provider. Ask them how many email can you add to your BackBerry.
Thanks.
Please thank those who help you by clicking the button.
If your issue has been solved, please resolve it by marking "Accept as Solution"

Testing failed when adding Web Service by OmniPortlet

I am using Portal of 10gAS. In "Define your OmniPortlet", I selected "Web Service" as the data type. After I typed in the WSDL URL and selected a method, I clicked on Test button under the setion "Enter values for the method parameters". But I got error saying login failed. What's the account it tries to login? How can I fix it?
The error varys, depending on which Method is selected from the list:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Web Service: Test Result
Error
Call to Web Service Failed. [SOAP-ENV:Server : java.sql.SQLException: ORA-01017: invalid username/password; logon denied at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:188)]
~~~~ or ~~~~~~~~~~~~~~~~~~~~~~~~~`
<ns1:getEmpXMLResponse xmlns:ns1="oracle.otn.ws.scott.OTNDeptEmp" SOAP-ENV:encodingStyle="http://xml.apache.org/xml-soap/literalxml" xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/">
<return>
<ERROR>
oracle.xml.sql.OracleXMLSQLException: ORA-01017: invalid username/password; logon denied
</ERROR>
</return>
</ns1:getEmpXMLResponse>

Hi,
I beleive you are using the WebService
http://otn.oracle.com/ws/oracle.otn.ws.scott.OTNDeptEmp?WSDL
The error message displayed is what the web server
is returning. Web server may encounter exceptions while executing any method.
As a web service client, OmniPortlet will display the error messages returned
by the web server.
You can try a differrent WebService , it seems to be the issue with WebService
Thanks
Vineet

Please help me analysis it, Failed when CSV file upload to PSA,

我的步骤是先建
1.DATASOURCE；
2.填写EXTACTION TAB的信息，数据格式旋转CSV,数据分割输入代号u201D，u201C
3.在Proposal tab,点击加载数据，可以看到CSV里面的数据；
4,点击Fields Tab,就跳出对话框u201CField list no longer corresponds to default copy changesu201D "yes or no "
5.点击YES，在FIields tab 里面可以看到Field,desciption等信息
6.点击PREVIEW，就出现错误信息，
请大家帮忙分析一下错误原因在那里。
---Runtime error -description of exception;
Runtime errors Data_length_negative
Except. CX_XY_RANGE_OUT_OF_BOUNDS
short text Invailid partial field access :length negative
what happened Errpr in the ABAP application program
The current Abap program "CL_RSAR_PSA==============CP " has to be terminated bacause it has
come across a statement that unfortunately can't be executed.
Error analysis
An exception occured that is explained in detail below.
The exception,which is assigned to calss 'CX_SY_RANGE_OUT_OF_BOUNDS", was not caught in
Procedure "_GET_DDI_STRUCTURE" "METHOD)",nor was it propagated by a raising clause.
since the caller of the produre "method"...........

只有一行数据也还是报同样的错，
我刚刚开始学，不知道怎么DEBUG，能否简单说一下怎么DEBUG嘛？
谢谢。
－－－－下面是错误信息
Runtime Errors         DATA_LENGTH_NEGATIVE
Except.                CX_SY_RANGE_OUT_OF_BOUNDS
Date and Time          09/04/2009 21:34:14
Short text
Invalid partial field access: Length negative
What happened?
Error in the ABAP Application Program
The current ABAP program "CL_RSAR_PSA===================CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_RANGE_OUT_OF_BOUNDS', was not
caught in
procedure "_GET_DDIC_STRUCTURE" "(METHOD)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
In the executed program "CL_RSAR_PSA===================CP", the system
attempted to access the field
"ME->P_PSA_TECHNAME" using the length "-3".
However, a partial field access with a negative length specification is
not allowed.
How to correct the error
Use a positive length specification if a part of the field "ME->P_PSA_TECHNAME"
is to be
accessed.
If the error occurred in your own ABAP program or in an SAP
program you modified, try to remove the error.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"DATA_LENGTH_NEGATIVE" "CX_SY_RANGE_OUT_OF_BOUNDS"
"CL_RSAR_PSA===================CP" or "CL_RSAR_PSA===================CM00A"
"_GET_DDIC_STRUCTURE"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
The exception must either be prevented, caught within proedure
"_GET_DDIC_STRUCTURE" "(METHOD)", or its possible occurrence must be declared
in the
RAISING clause of the procedure.
To prevent the exception, note the following:

Listener error when configuring ASM database

Hi There,
I've currently installed the Oracle grid infrastructure 11.2. and the Oracle 11.2 database software on Linux 5.5. The document I am following tells me to add this entry to the listener file I am confused ... Shuold there be two Listeners on the server? One for Grid Infrastructure and one for the database software. When I installed the Grid Infrastructure it installed a listener under the GRID oracle home. Thanks
46. Set-up a $ORACLE_HOME/network/admin/listener.ora file as detailed in the File Listings below.
Document i am using:
http://www.oracle-wiki.net/startdocshowtoinstalloracle11glinuxasm
As well, once I got to #25 I can not log into SQLPLUS so i had to skip to #39 and then go back .....
Please help I am very new to ASM.....
J

user560159 wrote:
Ok So I don't even have the ASM database created yet. I just updated the listener.ora file under the grid oracle home and stopped the listener user srvctl now it won't start up anymore ....... HELP PLEASE!
Jmove/rename listener.ora to new/different name
No listener.ora file is required.
listener will start without having any listener.ora file present
try it
You'll like it!

Oracle 11g Install hangs when "creating clon database"

hi, i'm new with all this stuff, i'm trying to install oracle 11g on a windows 2003 standard edition and the installation hangs in this point:
http://img233.imageshack.us/img233/1458/installni7.jpg
it's almost an hour and it's stuck in 45% when trying to create clon database in "Creating and starting oracle instance".
I checked the log file but it says nothing weird, just that everything went well and a "restore" was made.
what can i do?
thanks!!!

If someone still needs an answer to this:
I had a similar problem with 10g. If you use certain special characters in the password for the database during its creation, some script will hang forever at 45% of the database creation. Just use a plain password without special characters. At the end of the database creation you can change all passwords. At that stage you can use special characters without any problem.
I don't know if this is the same in 11g, but it sounds very similar.
JD

When adding a database copy to a server in the dag I receive the following error message

I have tried force replication, but didn't work. any suggestion on this
The wizard could not complete . clokc finish to close this wizard.
elapsed time 00:02:52
summary 1 item 0 succeeded, 1 failed
EX01-DB01
Error:
A source-side operation failed. Error An error occurred while running prerequisite checks. Error: the specified database isn't
configured for replication and therefore cannot be used to perform seed operations. Database:EX01-DB01,
Server:XXXXXXXXX
Warning:
Active directory couldn't be updated in HeadOffice site affected by the change to EX01-DB01; it won't be completely usable
until after active directory replication occurs.
Exchange management shell command attempted
Add-MAILBOXDATABASECOPY. Identiy EX01-DB01 -Mailboxserver HUTAEX01'
ActivationPreference '3'

After Add-MailboxDatabaseCopy command fails, do you see if the DatabaseCopy added to the server or?
I have seen this issue, it fails with above error, but after sometime it shows the copy added to the server.
Check the event log for more information also, any event related to AD!!!
Cheers,
Gulab Prasad
Technology Consultant
Blog:
http://www.exchangeranger.com    Twitter:
  LinkedIn:
   Check out CodeTwo’s tools for Exchange admins
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

HELP! Oracle FailSafe - Listener fails when adding standalone database

Similar Messages

Maybe you are looking for