BUG? Keywords (and other changes) made in bridge don't show up in lightroom

When I put keywords to images in Bridge _after_ editing them in lightroom, they never show up in lightroom.
And seems like color labels doesn't change if I try to do it in Bridge. Bridge shows new color label, lightroom shows old one.
and no, image is not open in lightroom when giving keywords in bridge.

I do not have that problem, but I am sympathetic to how much you dislike the LR keywording system. You would think Adobe would adopt a single system for all their related apps?
The best way i found to deal with it is to have both apps write to the xmp suidecars(for RAW)and to make sure there is a copy of ACR 3.7 8bi in the file format folders of all Adobe apps that I interchange files to and from. Presumably, by the time Bridge 2 and PS CS3 are out of Beta, all three apps will be on the same page using ACR 4.
My setup does work without a hitch--but I do not like the LR keywording at all. Like many attributes of LR, it is simplistic and largely designed for the new or casual user (and those that shoot or process the same category of images day in and day out (weddings, etc), rather than for someone with an existing, large DB and established workflow--and hundreds of diverse subject images a day to do!
I do all my keywording, renaming, and initial sorting and culling in Bridge CS3, and it goes at least two to three times faster than using LR for those workflow functions, and that is not due to inexperience with LR, but rather to far better workflow design for those functions in Bridge- tabbed, rather than a slider, driven interface for "developing" in bridge is also part of that better design.
I am using LR for its Develop module only--all the other modules fall far short of what I need and presently use--especially the Library--and doing that simply because Bridge 2 has a terrible memory leak and numerous beta bugs and interfaces more poorly with beta PSCS3 than LR (and that is not to say that LR does a sterling job at at all) for the moment
Maybe Adobe can get the Bridge and LR teams together over lunch and politely (but firmly)tell them to get the best of the common features from each into both.

Similar Messages

My account was accessed and unauthorized changes made by We R Wireless

I recently became a ware of a very serious issue and have been getting little assistance from Verizon. My account was password protected and had only 3 people identified as having the ability to make changes on my account. I received a notice from Verizon regarding a change made on one of my lines. Upon review it was an unauthorized change to add "Total Mobile Protection" to one of my lines for $9.00 a month. Also in this notice was a credit which I was entitled to for a $10.00 Active Promotion. I believe this credit was placed on the account so that the change might slip by unnoticed. When I looked into the change it was made by a Representative from We R Wireless in Ship Bottom NJ. I have never been to this store nor have I spoken with anyone ever at this store.
After calling the store and confirming my account was accessed and unauthorized changes made, I was told by the manager that an employee had in fact accessed my account and made those changes. I still could not understand how it was possible for the changes to have been made without my password. The activity certainly looked very suspicious and I figured it had to do with commission to the representative for adding the insurance plan. This was denied multiple times by the manager of the store as well as the District Manager. In the meantime I had received multiple emails from We R Wireless in their attempts to "Make this go away"
What came next was the most disturbing and upsetting part of this situation. I was told by the District Manager of WE R Wireless that my information they had collected years ago during a purchase of a phone and activation INCLUDING MY PASSWORD and that they had kept it in their system!!
WE R Wireless had shared my personally identifiable information and Password to my account with Sales representatives at the Ship Bottom WE R Wireless store and that was how they accessed my account!!
As you can imagine I have now been receiving multiple calls from The Director of Retail Operations, Musafa as well as the Director of Operations, Jimmy. They are attempting to sweep this under the carpet and it is inexcusable and unacceptable. The reason for this post is to WARN others who may have made purchases at anytime at a We R Wireless store that they KEEP YOUR PASSWORD and employees are given the Passwords and have made changes to accounts. I cannot believe that I am the only one that this has happened to and I am concerned this is a widespread breech and more importantly is ILLEGAL.
I will keep this Board updated with developments but can tell you so far Verizon has not been very responsive to my concerns but this is unacceptable and I am thinking of contacting the FCC as well as an Attorney. In this day and age of Identity Theft this situation must be addressed by Verizon whether or not this was one rogue employee or not our PASSWORDS and other Information should never be shared nor kept without our knowledge.
>> Edited to comply with the Verizon Wireless Terms of Service <<
Message was edited by: Verizon Moderator

I can only tell you that the Verizon rep from the Fraud department as well as Verizon's legal department contacted me and said under no circumstances are these companies to retain Customer Passwords. As you can see look at the potential for issues as evident in this situation.
As far as the FCC and their responsibilities this is directly from the website
The Federal Communications Commission regulates interstate and international communications by radio, television, wire, satellite and cable in all 50 states, the District of Columbia and U.S. territories. An independent U.S. government agency overseen by Congress, the commission is the United States' primary authority for communications law, regulation and technological innovation. In its work facing economic opportunities and challenges associated with rapidly evolving advances in global communications
The agency investigates consumer issues such as Cramming which has occurred here if you go to the site you will see some of the recent fines for cramming levied by the FCC and it is a huge issue. A consumer does not get involved in legal fees the FCC is responsible to investigate consumer claims of fraud and regulates the industry. The Attorney General also takes this very seriously as well.
Cramming - Unauthorized Charges on Your Phone Bill
Cramming Settlement for Consumers Announced
Dec. 19, 2014: The FCC, along with the FTC and state attorneys general, announced a $90 million settlement with T-Mobile regarding unauthorized charges - commonly known as "cramming" - on phone bills.
Current and former T-Mobile wireless customers should review their bills and apply for refunds if they suspect third party charges were wrongly added to their bills at www.t-mobilerefund.com/
Sent from my iPad

Appending Keywords and other metadata to the masterfile

I can't find an answer to the question:
How do I append Keywords and other metadata I added in Aperture to the masterfile without exporting?
I need that to import all that metadata of the masterfiles in a Portfolio database.

I guess you will need a new copy of the RAW to import into Portfoilio. That's really the only way to get Aperture to make the XMP file that contains the keywords. There is a program called Annoture which can convert Aperture metadata into metadata for the program iView Media Pro. No one has made a program to get metadata directly into Portfolio. Aperture wpn't "embed" the keywords in a RAW file because it will not alter the original. Maybe someday Aperture will create DNG files.

Changes made in symbol does not show?

Hi, I recently started working with adjusting a template with flash 8. Everything went smoothly except for one thing. I changed one certain symbol in my libray and when i exported the movie (after changing) i dont see the changes in my website. Other buttons, symbols etc immediatly show there adjustments and this just keeps on remaining the same? Anybody knows what to do with this? Please reply!

Hi,
I tried clearing the cache before. No success. The symbols that does not
seem to change are on the website. I searches the whole library and the
page i want to change i nowhere to be found (except for the symbols that
does not show the changes). I hope to hear from you (and anyone) soon!
2012/2/17 kglad <[email protected]>
Re: Changes made in symbol does not show? created by kglad<http://forums.adobe.com/people/kglad>in
Flash Pro - General - View the full discussion<http://forums.adobe.com/message/4213017#4213017>

How to get tools and other bars back in view after deleting show-bar?

How to get tools and other bars back in view after deleting show-bar?

Hello Jouko.
You can go into View > Toolbars and select the ones you want to see. If you can't see the menu bar you can simply tab ALT on your keyboard (I think F10 works too) to show it.

I have songs on my iPhone 6 that I can't remove and when I plug into iTunes and go to "Summary" and "On This Device" the songs don't show up but they are on my phone. How do I remove them? Not even sure how they got on actually.

I have songs on my iPhone 6 that I can't remove and when I plug into iTunes and go to "Summary" and "On This Device" the songs don't show up but they are on my phone. How do I remove them? Not even sure how they got on actually since I have a iTouch and keep all my music there. HELP!!

Have you tried deleting the songs from Settings?
Settings -> General -> Usage -> Manage Storage (not the iCloud link!) -> Music and then click Edit to enable you to be able to delete.

ACR not saving after "done" and no changes reflected in Bridge.

Am using CS5 and ACR 6.x (newest) on iMac (10.6.8)
Within the past couple of days I've encountered an issue when in ACR. I edit my raw file then press "done" to save my changes (in xmp).
Then going back to Bridge the symbols no longer pop up indicating any changes and going back in to bridge it is as if nothing has changed.
In Finder I can see I have an xmp sidecar.
This just began occurring with the last two cards I uploaded.
I use Nikon Transfer to upload from CF card.
To the best of my knowledge I made no changes immediately proir to this occuring.
After this first happened downloaded te latest updates to ACR.
It does not seem to mater if I have Generate High Quality Thumbnail set or not.
Any idea if I have a setting askew.
Thanks
Bob

Well, I think I found the problem. It was a setting in Bridge that I must have unset. In switching from Filmstrip to Metadata views and back I must have accidentally switched from "High Quality on Demand" to "Prefer Embeddd (Faster)"
When I discovered this and switched back it resolved the problem.
Scary as I do a lot of work in ACR and Bridge

My Photoshop CS6 Bugs, Ideas and other things

First of all, great job on many new features like: Dashed strokes, Styles for your Character and Paragraphs, Background saving.
I'm a webdesigner and I am using it now this whole morning and midday. So far so good, install went fine, working perfectly. But below a list of features I miss and a list of bugs or some other things I miss.
- Changing the opacity of a layer from any number to 100% doesnt work with the numeric pad
- Great job on the styles for typography, but why not doing the same thing for colors/swatches. You can make your own swatch library and you can attach that color to any object, shape, whatever. What would be really handy if you change that color in the swatches it would affect all objects who share that swatch. Really missing that feature a long time!
- Still missing external use of images/psd's/ any format. That I can place in my document, for example a psd, and when I change the original psd it would also automaticly update the placed object. It's like using a library like Fireworks.
- I like it when I drag my documents into photoshop, but when I drag a PSD to Photoshop it will open as a smartobject into the file wich was open, not as a new window. You can only achieve that by dragging it outside of the document, more like dragging it onto the option bars... Imo that's irritating.
- If you make a vector shape, it creates a path. If you select the shape it will show the path outlines around the shape. When you apply layer effects on the shape the shape is still selected, so you will see the path outlines around the shape. It's very annoying when you apply a stroke around the object it still showing the outline of the path around it. In CS4 (don't know about CS5) you could deselect the layer, then double click the effects icon on the layer and it will popu the layer styles menu without showing the outline of the path, in CS6 that doesnt work anymore.
I try to update this once in a while

So i finally started using the trial photoshop 6 and the first thing I notice, (that was wrong with 5.5) is that the zoom is zagged! Why must it zoom in large increments using the magic mouse? How it is possible to work with images zooming (very clunky) is beyond me. Photoshop 4 is fine. Nice and smooth when I'm using the finger scroll like a wel tuned machine, but then in the newest and greatest editions, it works like smashing the throttle to pull forward an inch!
This is crazy that something as basic as this is not addressed. Thank god that I can use the lasso tool and the zoom with scroll wheel again in this version (didn't work in 5.5) but hopefully this get s addressed. I really don't want to have to suffer through this when the newest final version is out.
Also, ( I assume this will be fixed in the final version) all of my preferences get reset everytime i open it. That is annoying.
So far I like the new look and it is much better than 5, but the basic things should work! I'm also not used to the tools not lining up with the cursors the same way. The lasso tool used to line up with the actual lasso, but now they line up with the arrow. Makes sense, but will take some getting used to.
PLEASE FIX THE ZOOM!

Saving changes made in Bridge

I am a new user. I've edited & cropped photos and the changes are visible in Bridge. But when I save them elsewhere, the image reverts back to it's original form. Any advice is appreciated.

curt y wrote:
I assume you are talking about editing in ACR. If so the edits are written to an XMP sidecar file. Other programs may not be able to read this files and piece the two together.
It is advised to move or rename these files outside of Bridge as the XMP file may get seperated. If you use a DNG files format I understand all the info is written to the image so there is no XMP file.
Does this fit with what you are seeing?
Two points about Curty's answer,
1. The changes are not always written to a sidecar file. I mention this in case people go looking for it where it doesn't exist!
2. I believe he meant to type, "It is advised not to remove or rename these files outside Bridge". Slightly different!

Incompatibility issue with imported images losing keywords and other metada

I am reposting this with a more descriptive title in hopes that the powers that be will look into this. This really nice piece of software is currently doubling the time in my workflow by having to re-input keywords, etc. after importing.
Wayne_N
Posts: 5
From: Texas
Registered: Sep 24, 2006
Re: import keywords and ratings into Aperture from adobe apps?
Posted: Nov 18, 2006 2:40 PM in response to: Egg
Click to reply to this topic Reply email Email
I am getting the opposite result. I have lost a lot of my keywords and various other data input in Bridge. Is there a setting I'm missing? I also put in Country name, city, state, contact, etc. in my Brdige metadata, but this is not importing with the RAW files. I am referencing images if that matters, although it shouldn't.
Macbook Pro and Mac Pro Mac OS X (10.4.7)
pvonk
Posts: 19
Registered: Mar 2, 2005
New! Re: import keywords and ratings into Aperture from adobe apps?
Posted: Nov 18, 2006 3:25 PM in response to: Egg
Click to reply to this topic Reply email Email
I also used Bridge/ACR to rate and add keywords to RAWS (Canon) and also used Adobe DNG converter to make DNG files from these.
No ratings or keywords have imported for any RAWs and DNGs. And, for some DNG files (which I can see in Bridge and iViewMedia), they cannot be displayed in Aperture. It's very strange since I've used the same workflow to create the DNG files over the past year. Some can be imported/viewed, some cannot be viewed. All originally from the same camera/RAW file. I've read in this forum that Aperture cannot read things like keywords from sidecar files.
I am hopeful that Apple will make DNG sidecar file import a big priority.
- Pierre
MacBook Pro, 2.16 GHz, 2 GB SDRAM Mac OS X (10.4.8)
Macbook Pro and Mac Pro Mac OS X (10.4.7)
Macbook Pro and Mac Pro Mac OS X (10.4.7)
Macbook Pro and Mac Pro Mac OS X (10.4.7)
Macbook Pro and Mac Pro Mac OS X (10.4.7)
Macbook Pro and Mac Pro Mac OS X (10.4.7)
Macbook Pro and Mac Pro Mac OS X (10.4.7)
Macbook Pro and Mac Pro Mac OS X (10.4.7)
Macbook Pro and Mac Pro Mac OS X (10.4.7)

I have been testing Lightroom since beta 2, but after reading The DAM Book, I decided to hold off committing to LR since it was not clear that it would fit into the workflow recommended in the book.
I had processed some of my recent photos, adding ratings and keywords (and doing some editing - but I knew that was not necessarily permanent due to LR's incompatibility with PS/Bridge when it came to metadata).
I had briefly looked at Aperture a while back, but was turned off by the price (then $500) and the fact that it couldn't reference the original files. When the 1.5 demo came out with its improvements, I tried it and loved it! After much thought about the workflow I had developed, I decided that I could alter it so that Aperture would fit in - in fact it would be my main app (giving up Bridge/ACR/iViewMedia Pro).
As per The DAM Book, I had begun converting my Canon RAWs to DNG (fortunately kept most of my RAWs). The first thing I discovered in the demo (I have since purchased the app, 1.5.1) was the fact that none of my ratings and keywords came through. Also, I used the color labels in Bridge to help during the evaluation phase, those didn't come through either, but I expected that. As I also noted in the previous post, some of my DNGs can't be viewed in Aperture even though they can be viewed in Bridge and iViewMedia.
Fortunately, I had not "processed" all that many photos in my collection, so I can easily start again with the ratings and keywords. BUT there will be many photographers who have, and if Aperture hopes to tempt them away from LR or the other workflows, the Apple team should seriously consider providing support for Adobe's keywords/ratings found in sidecars and perhaps in DNGs. Also, good support of DNGs might be another thing to look at, as many users have been converting from RAW as I have.
Just my three cents (inflation).
- Pierre

Are keywords and other metadata in web galleries Google-searchable

I am currently creating my first website and wish to use one of the website templates in LR 2.6.
My question is, will Google-etc search engines 'see' my keywords and image titles during their searches?
I hope someone can help.
Thank you

Not by google, yet, but by other methods.
.Jeffreys Exif viewer will read it and there are other web based image search engines that do. Only time before google does likewise I would guess.
This is a usful link to how to add google analytics to LR web sites

PP & AE Dynamic link - changes made in AE are not showing up in PP

Hello,
I am doing the following:
1. In Premiere Pro (CC 2014) I select a clip on the timeline --> right-click --> Replace with After Effects composition.
2. In AE, I am doing some animation of text.
3. Usually, any changes done in AE, are automatically shown in Premiere + the red line appears which means I have to render the clip.
4. Once in a while and not vert often, for certain clips, it randomly stops working:
I am making a change in AE, but the change is not seen in Premiere and the line above the clip doesn't change to red.
Any idea what might be causing this and how to fix it ?
Thanks,
Tal

Thanks for you responses WC. The changes I made to iPhoto did eventually show up, but it took over an hour. This is really the only 'issue' I've had with my ATV2, but it was extremely frustrating. I tried rebooting the ATV, my computer, and a number of other things, but nothing worked. Eventually I walked away from it, and when I came back everything had updated.

Changes made in Lightroom3 don't print

Sometimes, the edits made in LR 3 are not applied when I print. They also do not show correctly if I choose them as the desktop background accuratly (afterexporting it as a jpg file).
The photo is colorful but my desktop is not!
I've exported a number of files and then printed them through windows. Some print fine and some don't.
What am I doing wrong here? What setting am I missing?
Thanks,
Steve

Let me say this in a different way.
When I take my exported jpg files and open the photos in Paint Shop Pro, the color enhancments that I previously made in LR3 are gone.
Why does Win 7 show the thumbnails of these files with the vibrant colors but window wont print them and they also don't show up in Paint Shop Pro?

Changes in my website don't show up

For 8 days now I have been struggling with this problem and now I'm starting to suspect something about my internet connection, though I only notice the problem when working on my website.
I have a self-hosted Wordpress website. Starting 8 days ago, whenever I made a change in the back end, such as change my layout or add a widget, the change does not show up when I reload my website for a long time (like a half hour).
This happens in all three browsers, Safari, Firefox, and Chrome.
This happens with any theme I choose to use.
Yes, I have cleared my cache and history. And it happens in Private browsing too.
WHY? Can you tell me why, and how to get this fixed? It's really hard to create a website when I can't see the changes right away.
Solved!
Go to Solution.

Update to this problem . . .
A Bluehost tech did a trace route that showed Verizon is the problem. I don't totally understand, but it's like Verizon isn't letting me getting into Bluehost (at least not timely; since the changes do show up eventually). Here's a copy of the traceroute:
trace to you It stops at verizon if this is your ISP then we connected to you.
traceroute to {edited for privacy}, 30 hops max, 60 byte packets
1 10.200.15.252 (10.200.15.252) 0.579 ms 0.567 ms 0.561 ms
2 gw20.bluehost.com (74.220.198.1) 1.338 ms 1.565 ms 1.764 ms
3 69.195.127.3 (69.195.127.3) 2.294 ms 2.559 ms 2.437 ms
4 port100.ar05.prov.acedc.net (199.58.199.117) 12.883 ms 12.890 ms 12.879 ms
5 10gigabitethernet3-4.core1.slc1.he.net (66.160.133.117) 3.898 ms 2.913 ms 3.075 ms
6 10gigabitethernet6-2.core1.den1.he.net (184.105.222.153) 22.869 ms 20.853 ms 20.883 ms
7 den-b1-link.telia.net (80.239.133.29) 15.307 ms 14.928 ms 15.626 ms
8 chi-bb1-link.telia.net (213.155.133.190) 39.003 ms chi-bb1-link.telia.net (213.155.133.172) 39.612 ms chi-bb1-link.telia.net (213.155.130.136) 39.446 ms
9 GigabitEthernet2-0-0.GW2.CHI13.ALTER.NET (157.130.107.121) 43.554 ms 43.319 ms 43.197 ms
10 P13-0-0.CLPPVA-LCR-02.verizon-gni.net (130.81.23.0) 64.140 ms 64.436 ms 63.780 ms
11 ge-1-0-9-1202.CLPPVA-VFTTP-302.verizon-gni.net (130.81.188.59) 69.612 ms 68.903 ms 68.646 ms
12 * * *
13 * * *
14 * * *
15 * * *
16 * * *
17 * * *
18 * * *
19 * * *
20 * * *
21 * * *
22 * * *
23 * * *
24 * * *
25 * * *
26 * * *
27 * * *
28 * * *
29 * * *
30 * * *
Another Bluehost tech suggested I go to the library and try making some changes to my website there, and see how quickly they appear. That went fine, the changes showed up immediately, but actually made the whole thing more confusing because it turns out my library uses Verizon for their ISP too.
I tried to get help from Verizon anyway. That was a fiasco.
I didn't come back here to the forum right away because I hadn't even gotten any response to this post yet. I wanted to find a live chat, but didn't at first. Then I decided to download the In Home Agent, which is a joke; it's just like downloading an annoying FAQ to your computer (and later I found out it's very difficult to uninstall). But I found the live chat button in the home agent, and spoke to a guy who didn't have much to say, quickly telling me that because it was a website issue I should email [email protected] He didn't even want to see the traceroute
So I did. They were worse than unhelpful, to the point of condescending. After explaining my problem, including the fact that I've been working with Bluehost for hours over the last 8 days, their entire answer was, "You are not hosting your domain with us but with bluehost.com"
To that ridiculous response, I replied, "Of course I know where I am hosting my website! I was told by the Verizon live chat guy to write to you. And doesn't the trace route show that Verizon is the issue, like Bluehost is saying?'
His entire response was just two links, no other text. The first link took me to my Whois, as if he didn't believe I know where I'm hosting, and the second was to Bluehost's contact page. Unbelieveable!
I did go back to talk to Bluehost some more, where they're always friendly and helpful, but he confirmed what two others have already said, that that traceroute shows that Verizon is stopping my website from reloading quickly.
I looked for a Verizon email address but can't find one. I don't want to sit on hold on the phone with a Verizon agent. So I guess I have to write here.
I've read a lot of negative things about customer service at Verizon. Please prove them wrong and help me fix this problem. Thank you.

Multiple users on a Bridge network. Some of us can see keywords and others cannot.

We have multiple users on Bridge. We set up a cache connected to our server that has tons of photos on it. When we type in a keyword, some of us can see it on our Bridge on our computers but others cannot. How can we all be in sync with our searching?
Is it a connection problem? Any feedback is appreciated.
Thanks!

Curt
how do you know if your using the
Central cache all distributed cache ?
and are they both stored in the same place ?

BUG? Keywords (and other changes) made in bridge don't show up in lightroom

Similar Messages

Maybe you are looking for