Bug report EA6400 LAN IP - DHCP settings

Dear reader,
I'm not sure I'm in the right place, but I want to report a bug in the EA6400 firmware.
Firmware version (latest at this time and date):
10/16/2013
Ver.1.1.40 (build 153731)
Problem for short:
Routers IP address cannot be changed with DHCP server disabled.
Problem in detail:
When configuring my EA6400 router, I could not change the network portion of the Routers own IP address (192.168.1.253 to 192.168.2.253) while I had the DHCP server disabled.
The router showed an error message about the IP address (something about it being invalid).
After enabling the DHCP Server (and making sure the range doesnt overlap with my current DHCP server) and applying the setting, the routers IP address could be changed.
With the IP address of the router changed, I disable the DHCP server function.

Hi DvanBavel! Thanks for letting us know about this. As far as I can remember, when setting up LAN to LAN network  where I had to disable the DHCPS server also, I always change the router's IP address first. It is because as soon as I disable the DHCP server on the router's IP, the page closes right away and I am unable to access it again. I didn't know that this was a bug though. Let's wait for others to comment. 

Similar Messages

  • BUG report - Inconsistent IR settings in Builder

    Apex 4.0.2
    Most of the reports used in the App Builder have been converted to use Interactive reports which is great. But I find that the IR settings are not consistent across all the reports. I had reported this during the tryapexnow.com beta phase. Now that we can use the new apex_application_install API to load up the Builder apps into our own workpace so we can review how they are built, the Region Utilities > Update Interactive Report Settings page shows this. Or just run the query
    select
    page_id, name, allow_save_rpt_public, show_finder_drop_down, show_display_row_count, show_search_bar, show_search_textbox, show_actions_menu, show_select_columns, show_rows_per_page, show_filter, show_sort, show_control_break, show_highlight, show_computation, show_aggregate, show_chart, show_notify, show_group_by, show_calendar, show_flashback, show_reset, show_download, show_help
    from apex_040000.wwv_flow_worksheets
    where flow_id=4000My main annoyance is the "Save Report Public" checkbox. The IR saved report list shouldn't be cluttered with all the report settings saved by all the workspace developers.

    Please submit an official bug report to Adobe at:
    http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
    Alexander.
    Canon EOS 400D (aka. XTi) • 20" iMac Intel • 12" PowerBook G4 • OS X 10.4 • LR 1 • PSE 4

  • Bug Report: The keyboard focus doesn't automatical...

    Bug Report: When a conversation window opens, the focus doesn't automatically land in the chat entry text field.
    Since the new interface for Skype was introduced officially in Skype 7.0, there is a bug with the system/keyboard focus for a new conversation window. When Skype is in "Split Window View" and each new conversation automatically pops up in a separate window, the system/keyboard focus doesn't land in the chat entry edit field. Instead, the user has to press Shift+TAB a couple of times, to move it there and reply to the chat message received. This especially problematic for screen reader users, who rely on keyboard navigation. This mainly occurs when a new conversation is started with an incoming message, but it sometimes occurs when moving the focus out of that conversation window and later back in it again (while it is still opened).
    Steps to reproduce it:
    1. From "View" menu, activate the "Split Window View", if it is not already enabled.
    2. From Tools -> Options -> IM & SMS -> IM settings, enable "Open a new window when I receive a new message in Split Window View", if it is not already enabled.
    3. From Tools -> Options -> Advanced, activate "Enable accessible mode", if it is not already enabled.
    4. Activate the "Save" button, to save the changes.
    5. Close all windows, related to Skype. You may keep only the main window opened.
    6. Tell someone to send you a chat message. When the message arrives, Move the system focus to the conversation window in question, preferably with Alt+TAB. The system/keyboard will not land in the chat entry edit field as it did in Skype 6.21 and earlier and as it should by default, but in some unknown place in the window.
    7. Move the system/keyboard focus in the chat entry edit field and keep it there.
    8. Switch to another window, preferably from another application.
    9. With Alt+TAB, switch back to the window of the opened Skype conversation. There is a chance that the system/keyboard focus will not land in the chat entry edit field as it did in Skype 6.21 and earlier and as it should do by default, but again in some unknown place in the conversation window. But that is harder to reproduce.
    Test environment:
    - Operating system: Windows 8.1 Pro N, 64-bit, in Bulgarian with all locale settings set to "Bulgarian".
    - Skype version: 7.0.0.102 for Desktop.

    This is a known problem, but Skype have not given us an estimated time for a fix.
    Traditionally, Skype updates have been roughly monthly, so we are due a new version sometime soon. Many of us here are hoping that is has a bunch of fixes for the UI, the focus problem being one of them.
    Sean Ellis - uses Skype chat for serious work
    Click here to read my blog post on Skype 7 and basic principles of GUI design

  • Bug report: vpn (ipsec) interface number in snmp always change

    Hi,
    this is a bug report for RV082 hardware version 3 and 4, firmware version 1.x, 2.x and 4.x (all latest versions). I hope someone from cisco/belkin reads it.
    Summary:
    The snmp interface number of a VPN Tunnel change when the VPN tunnel disconnect and then re-connects.
    What should happend:
    The VPN Tunnel number 1, should always have the same snmp interface number. In RV082 v4, this number should always be 10. For example, the LAN, WAN1 and WAN2 always have the same snmp interface number.
    What is the problem:
    The VPN Tunnel number 1 change the snmp interface number, from 10, to 11, to 12, etc.
    How to reproduce:
    create a VPN Tunnel using 2 RV082 or 1 RV082 and 1 RV042. Once the VPN Tunnel is connected write down the snmp interface number. A few days later, disconnect the cable of block internet access. Then restore the internet conection and write down the snmp interface number, you should note that the snmp interface number have changed.
    Tools used:
    PRTG Network Monitor
    Please take a look at the attached image, note all the "ppp" interfaces, theres only 1 VPN Tunnel (gateway-to-gateway) defined.

    Hi Tom,
    many thanks for your reply.
    I see that I have to call Tech-support, in order to report a very technical situation, explaining them this is a bug report and I want them to make a better product.
    Since I won't pay a dime for this problem to be fixed, I can only see pain in this path(calling to speak with a tech support representative).
    I also readed that Belkin has bought Linksys, so I don't know if the RV082 will remain with Cisco or will go with Belkin.
    So, my only hope is to document this bug, that is pressent inall firmware version and hardware version of the RV082 as of today.
    many thanks for your help,
    regards,
    Oliver

  • Bug report: A keyboard layout is incorrect on the remote with Japanese keyboard

    This is a bug report for Microst Remote Desktop
    ===================================================
    ## Summary
    A keyboard layout is incorrect on the remote with Japanese keyboard
    ## Version Information, I tested
    * Client
        * Case 1
            * MacBook Pro with JIS106 Keyboard
            * Mac OS X Lion 10.7.5
            * Microsoft Remote Desktop 8.0.24308
        * Case 2
            * MacBook Pro with JIS106 Keyboard
            * Mac OS X Mavericks 10.9.1
            * Microsoft Remote Desktop 8.0.24308
    * Remote
        * Case 1
            * Windows 7 Professional Japanese
        * Case 2
            * Windows Server 2008R2 Datacenter Japanese
        * Case 3
            * Windows Server 2012R2 Datacenter Japanese
    ## Detail of bug
    When login from Mac OS X with Microsoft Remote Desktop, the keyboard layout is always incorrect on the remote.
    The client machine have a built-in keyboard of JIS 106 layout,
    and the primary language is set to Japanese.
    But on the remote, the keyboard layout is US 101.
    So a input of Shift+2 does not result " but @.
    I've seen the above behavior on the 3 remote enviornments described the above.
    This bug did not occcur with Microsoft Remote Desktop Connection Client for Mac 2.1.1, even if the system language is English and keyboard layout is Japanese.
    ## Captures
    I've took some of screen captures.
    I'm sorry for the capture includes Japanese words, so I added description in English.
    Capture 1:
    Mac OS X Keyboard Setting
    Capture 2:
    Windows Server 2012R2 Screen Keyboard
    Capture 3:
    Windows Server 2012R2 Screen Keyboard, with a additional registry key configured.

    This bug also affects the Canadian English settings.  If the client is set to Canadian English with a US keyboard the remote server is setup using a Canadian French keyboard.  Using the language selection in the toolbar you can temporarily correct
    the problem but the keyboard resets to french at the most inopportune times.  The was a problem in the earlier RDP client and was fixed so it's sad to see it reoccur in the new client.
    Lawrence

  • BUG REPORT FIRMWARE 5.1.7  PLEASE FORWARD TO SUPERVISOR....

    BUG REPORT FIRMWARE 5.1.7  PLEASE FORWARD TO SUPERVISOR.
    The spa-3102 has the following two bugs.
    When the unit sends a hook-flash to the fxo port it:
    a)      does not send the hook flash to the fxo port  for PSTN Hook Flash Len:  Instead it uses a very short pulse of about 100ms or 1/10 of a second.  It should honor the PSTN Hook Flash Len configurable parameter of .2 – 1.5 seconds.
    b)      Does not change the line voltage from –7 (off-hook) to –48(on-hook) during a flash-hook to the fxo port.  Instead it varies the voltage only by about 2.5 volts.
    This was reported as early as June 07 to linksys support.  It is reported they agreed and would fix in the next firmware release.  There is info that firmware 5.2 being released and is this fix in 5.2 and how can I get it.

    Although the problem is still not solved, at least I now know WHY the problem is happening... and Apple's Firmware Update is NOT to blame!
    Through a series of coincidences, I was actually lucky enough to get in touch with the engineers in Apple's Airport firmware division, and they were helping me to nail down this problem.
    Turns out that Apple takes great PRIDE in the fact that they are one of the VERY FEW manufacturers who make routers that behave properly in this regards: they SPECIFICALLY test for their Airport Extreme routers to allow you to connect to servers behind the NAT by way of the public WAN IP address of the NAT box. This is the way that apparently the NAT/DHCP specification is SUPPOSED TO WORK! You're SUPPOSED to be able to connect this way, if you so desire.
    So what was causing the problem on my network, then?
    Something I hadn't thought about... the Vonage Linksys RTP300 router that we're using for our Vonage VoIP service. Turns out that this router does NOT support clients behind the NAT connecting to servers behind the NAT by way of the public WAN IP address.
    Linksys is to blame, not Apple!
    And apparently, this feature may have actually been working in an earlier
    firmware update, but apparently, Vonage AUTOMATICALLY pushes firmware
    updates to RTP300's, apparently without user notification:
    <http://www.vonage.com/help.php?article=1066&category=90&nav=5>
    And a forum thread on vonage-forums.com seems to indicate that the 1.00.60 firmware in the RTP300 started getting pushed to customer units on or before 1/26/06, making it less than a month after Apple shipped the 5.7 firmware update for AirPort Extreme Base Stations:
    <http://www.vonage-forum.com/ftopic10915.html>. So if the problem cropped up then, it's possible that I accidentally attributed it to Apple when really the RTP300 got a firmware update around then too which may have broken this feature (assuming it was working before then).
    Power Mac G4 QuickSilver Dual 800 MHz   Mac OS X (10.4.4)  

  • Bug Report: New conversation window stills the sys...

    Bug Report: Skype Desktop: New conversation window stills the system/keyboard focus.
    When the UI is in multi-window mode and a conversation window pops up (due for example to a newly received chat message), that window steals the system/keyboard focus, even though it appears in a minimized state in the Windows taskbar. And this should not happen by default, because it is impractical (especially for screen reader users). And it didn't happen in Skype 6.21 and earlier. But since the new UI was introduced officially in Skype 7.0, it started happening constantly.
    Steps to reproduce it:
    1. From "View" menu, activate the "Split Window View", if it is not already enabled.
    2. From Tools -> Options -> IM & SMS -> IM settings, enable "Open a new window when I receive a new message in Split Window View", if it is not already enabled.
    3. From Tools -> Options -> Advanced, activate "Enable accessible mode", if it is not already enabled.
    4. Activate the "Save" button, to save the changes.
    5. Close all windows, related to Skype. You may keep only the main window opened.
    6. Move the system focus to another application.
    7. Tell someone to send you a chat message. When the message arrives and the conversation window pops up minimized in the Windows Taskbar, everything seams to be as it should. A few seconds after that however, the system/keyboard focus gets moved to that new conversation window, even though it is neither restored/maximized (it is minimized), nor it is visible on the screen (except as a button in the taskbar).
    Actual results:
    When a new conversation window pops up in the Windows taskbar, it stills the system/keyboard focus to itself from the currently focused application.
    Expected results:
    Skype's popping up new conversation windows should not still the system/keyboard focus to themselfs from the currently focused application.
    Test environment:
    - Operating system: Windows 8.1 Pro N, 64-bit, in Bulgarian with all locale settings set to "Bulgarian".
    - Skype version: 7.0.0.102 for Desktop.

    This is a known problem, but Skype have not given us an estimated time for a fix.
    Traditionally, Skype updates have been roughly monthly, so we are due a new version sometime soon. Many of us here are hoping that is has a bunch of fixes for the UI, the focus problem being one of them.
    Sean Ellis - uses Skype chat for serious work
    Click here to read my blog post on Skype 7 and basic principles of GUI design

  • The new Synaptics UltraNav: a few workarounds and minor bug report.

    I only wanted to file bug report, but then decided to also share what I did with my touchpad configuration to make it more convenient for me. I have Thinkpad T540p so this might work differently or not work at all for other notebooks.
     #1 Regedit
    Configure as much as you can using UltraNav tab in mouse settings dialog. (It is mostly self-explanatory.)
    If you didn't find some option, start regedit (using Win+R) and navigate to
    HKEY_CURRENT_USER\Software\Synaptics\SynTP\something
    This something is TouchPadSMB2c on T540p but you can find one you need by changing something in settings dialog and looking for changed values in regedit.
    All the touchpad configuration registry keys are there. You need to relogin to apply changes made there.
    But it might take a lot of trial and error to find out how these registry keys work.
    #2 3-finger tap
    As for me, I prefer tapping over clicking. While 3-finger press option is in settings dialog, 3-finger tap is not. But you can change it.
    Set whatever option you want for 3-finger press. Then go to regedit and copy value from 3FingerPressButtonAction key to 3FingerTapAction.
    #3 Button sizes and locations
    You can change button bounds with keys like LeftButtonZoneX where X is L for left, R for right, T for top and B for bottom bounds. 0xFFFFFFFF ultimately means "unlimited in that direction". For finding other values defaults might be helpful. Trackpoint buttons keys are SlaveSomeButtonZoneX.
    What for?
    First, trackpoint buttons can cover the whole trackpad only when trackpad itself is disabled. By changing button sizes manually you can overcome this restriction. It is useful because trackpad does not respond well to pressing corners and when buttons cover it all you can press it somewhere in the middle.
    Second, the same corner pressing problem exists for normal trackpad buttons so it is more convenient to use multi-finger taps or clicks. You can still hold trackpad pressed with one finger and use yet another finger to move mouse pointer.
    At the same time when you tap or press with multiple fingers and one of them touches one of the buttons you get that button pressed instead of whatever you intended. It frustrated me a lot when I got context menu popups while trying to close chrome tabs with middle mouse button click. The solution is to set top bounds for left and right buttons to zero.
    BUG (With the latest UltraNav drivers from support page)
    When the middle trackpoint button (used for scrolling) is enabled, it is always enabled, no matter if you are using trackpont or touchpad. Left and right trackpoint buttons are properly disabled when you don't need them.
    Even if you disable trackpoint completely without disabling that middle button first, it will remain enabled and will do nothing. (Blocking single- and multi-finger presses that touch it.)
    I could not find a way to fix that problem with regedit.

    Any problem can get official response and follow-up through a SR on Metalink/MOS (if you have a DB support contract), else you can post here and hope someone from development picks it up.
    Regards,
    K.

  • How do i use the bug reporter in ios 8

    im trying to use the bug reporter for the beta ios 8 but i dont get to input anything. Maybe i dont understand how this works,so can someone please explain.either way i figure i should say somthing now.
    -the infinity blade 2 app does not load
    -my settings button doesnt load all the time,
    -most of the apps dont load the first time i open them,if i switch to another menu then back it will load.
    -just now i shut off my phone, plugged it into the charger. My phone then turned itself back on and had me reactivate it.
    -the "sample" button in the ibooks app doesnt seem to do anything either
    -most of the time scrolling down on anything rather large(e.g.songs,articles,facebook) there is alot of skipping or lagging effect
    -when on safari i turn my phone sidways and it totally messes up where things should go and it wont return i have to exit and close to fix
    anyways id just thought id put that out there

    You need to ask this question in the Developer's forum, which as a registered developer you have access to. If you're not a registered developer, then you have no business messing with iOS Beta software, & discussing such, even bug reporting, is PROHIBITED in this public forum.
    But, as a registered developer, you already knew that, correct?

  • Since I can not log in bug report page, not even getting an error message, I'll write all my issues with ios8 here...

    Since I can not log in bug report page, not even getting an error message, I'll write all my issues with ios8 here... I have an iphone 4S and I did the last update. Now I am in trouble.
    1. When I move the "sound on/off" button, I get it buzzing 10 times before the setting is changed and I can do anything else, just not reacting to the round button on screen touches.
    2. Impossible to copy text from most websites into notes.
    3. Impossible to delete an email account in settings.
    4. Uses up the battery twice as fast as before. I have "update apps" setting turned off, just reading a couple of mails, making a couple of photos and open maps apps twice a day, and the battery is dead well before the evening.
    5. Got extremely slow, and it was getting slower and slower with every system update.
    I'm sure I forgot something... But well, that already a lot.

    Well, actually number 3 in my list is not true any more, I just tried to delete my account 15 times, then I've written my post, then half an hour later my Settings finally updated my accounts list. Whohoo
    I did not try restoring it yet, thank you for the link!

  • Bug report: Energy Manager causes slow performance...

    Very slow Windows Startup..
    Energy Manager's plans and the problem occured using any plan as I remember, and it wasn't an issue with the maximum processor state. I had heavy disk usage, especially access to the Page File, which is what the person in the second link I posted also described. CPU usage was low. The disk usage was seemingly not related to Energy Manager (Chrome was usually the worst), but removing Energy Manager completely resolved the problem. If you would find it helpful. I'm quite confident that even with Maximum Processor state at %100, CPU usage was low when it was slow, and that disk access was the culprit.
    previously have use 1.0.0.31 or 32 not sure.
    Windows 8.1
    Im using Lenovo Energy Management Driver
    1.0.0.28
    4.6.2014

    I actually have the same problem.  Sorry to work on a old thread, but...
    I've got my Lenovo B50-70 less than 1 month ago, and had switched it to SSD and had set everything up and is working perfectly.  However there are a bunch of lenovo programs that came pre-installed.  This computer is used mainly for work and I really don't like programs that suddenly pop-up and ask you to do stuff, as it is quite distracting, and with Lenovo Energy Manager being one of them so I removed it.  (I did do some research before I remove...)
    Everything was fine, until when I try to switch on my wifi (I usually have it off, as I use LAN most of the time)...  For the B50-70 there is a airplane button on F7, which allow the user to switch wifi and bluetooth on/off.  That button was unresponsive...  After some digging it is actually related to the power energy manager being removed.  So I've downloaded the latest version from Lenovo and it was working again...
    However though, whenever I start my computer it is taking so long to start...  And I tried uninstalling the power energy manager and it solved the problem...  And I am stuck with either having no wifi on/off ability or a really slow boot, which loses the whole purpose of the SSD.  After you enter your username and password it originally takes around 5~10 seconds to login, now it takes over 1 minute.
    I have found this other link, which says Lenovo Power Manager having the same problem.
    https://forums.lenovo.com/t5/ThinkVantage-Technologies/Bug-report-Power-Manager-causes-slow-performa...
    There is a solution, which you can change the registry to switch a function off.  I've tried it and it didn't work, which is not surprising as it's a different program..  But I am hoping that Lenovo can provide a similar solution for Lenovo Energy Manager...

  • Acrobat X Scanning Cancelled Problem / WORKAROUND / BUG REPORT

    As you have read in other threads, Acrobat X on Windows has a serious scanning problem with HP and possibly other scanners.
    Whereas in Acrobat 9 scanning worked reasonably well, Acrobat X seems to be unable to cope with scanning documents from the flat bed of a multifunction scanner.
    So, if you are scanning from the feeder, scanning works, but if you are scanning from the flatbed, you will get a brief pause and the phrase SCANNING CANCELLED.
    This is, of course, not acceptable.
    The problem is that Acrobat X does not play nicely with the scanner drivers.  Previously, Acrobat 9 would "auto-detect" the source of a document, using the feeder if loaded, and "falling back" to the flatbed otherwise.  However, Acrobat X does not fall back.  If there is nothing loaded in the document feeder, the scan will be cancelled by Acrobat X.
    The workaround - and I would NOT call this a "solution" - is to use only the "Custom Scan" command from Acrobat X.  When the window pops up, choose the "Options" button and select "Native Mode" and "Show Scanner's Native Interface" from the two menus.  (Acrobat X does seem to remember these settings at least within a session, so if you're scanning multiple documents you only need to do this once.)  Then scan.
    You will see a new window pop up - the scanner's "native interface."  On my computer, this window shows up BEHIND the Acrobat X screen (annoyingly) so you have to watch for it and click forward.  Be sure to select "flat bed" from the "document source" menu.  On my computer, this setting is NOT remembered between scans, so you have to do this for EVERY SCAN.  Then, the document will scan, and you can do what you want with it in Acrobat X.
    Needless to say, this is a long, painful, slow process, especially if you're scanning lots of flatbed items, as I do.  Hence it's a "workaround" and NOT a "solution".
    The SOLUTION will be for Adobe to FIX this.  ADOBE:  THIS IS A BUG REPORT.  PLEASE LOG THIS IN AND FIX IT.  Acrobat 9 with CS5 worked perfectly, as did Acrobat 8 before it.  Moving to CS5.5 with Acrobat X broke this.  Sloppy.  Please fix!  Thank you!
    Glen Barney

    I used your workaround (thank you!) but it was very annoying. Although I set up the options for a single multi-page document, Adobe gave me separate files and I had to consolidate them. I also had to fill out the options (color, flatbed vs feeder) for each page. This function was working for me at some point, so I don't know what happened to make my HP Multifunction and Adobe part ways. I hope Adobe comes up with a successful patch for this problem.

  • DHCP Settings keep resetting?

    I've actually had this problem since Server 2 for Mountain Lion, and removing Server and /Library/Server would do the trick, but not with Server 3.1...
    Any ideas?  To be clear, every time I set the DHCP settings and enable the DHCP service, it will reset on reboot.  Sometimes it will reset without a reboot of OS X and suddenly none of my devices can get on WiFi.

    Launch Console.app from Applications > Utilities directory, open the view of all the logs on the left if it's not already open, and see if the DHCP server is logging errors when the startup is attempted.
    Check your local DNS, too.  Launch Terminal.app from Applications > Utilities and issue the following harmless diagnostic command:
    sudo changeip -checkhostname
    This command will either tell you no changes are required, or that there are DNS or network issues lurking.  DNS issues cause all sorts of weird bugs, as can networking problems.
    Also ensure the server is not using .local as its top-level domain.

  • Is there a place to submit bug reports for iTunes 11?

    I was wondering if anyone knows of any communities, or ways in which we can submit errors, or bug reports for the new version of iTunes, version 11.0? The 2 issues so far that I am seeing, is:
    1. My account information: iTunes shows I have hidden purchases, when on all my iDevices, I have 0. (In fact, before the update, I un-hid all previously hidden purchases, and it showed correctly).
    2. When syncing a device, on the last tab for items on device, on my iPhone 4, iOS 6.0.1, it shows I have 2 songs downloaded from my collection, when I know I have 0. (Verified by checking Settings>General>About>Songs = 0

    Yes,
    In iTunes;
    Help (pulldown)
    "Provide iTunes Feedback"
    However, as of this writing iTunes 11 isn't listed in the 'Version list, so make sure that you state the version in your description.
    -Alan
    ps. If you dont see the Help pull-downmenu, press 'Alt' to toggle it.

  • Bug report regarding SSL library used by Sharepoint web server

    I have attempted to report this by email to the [email protected] address, but they tell me this is not the correct address to use and have refused to give me a better one or forward my bug report on to the correct people. I'm hoping that by posting it here I will get the attention of someone who can fix the problem.PROBLEM DESCRIPTION:Accessing the Sharepoint web servers (157.55.229.87) is not possible from a Scientific Linux 6.5 system using OpenSSL 1.0.1e. Analysis of the network traffic shows the client successfully connects to the server and sends a TLS handshake. The server responds with a TCP ACK, but does not include a TLS handshake response. After 30 seconds the server tears the connection down with a TCP RST.
    This is reproducable with the following command:
    openssl s_client -showcerts -connect sexeysschool-my.sharepoint.com:443
    DIAGNOSIS:
    The client's TLS handshake contains several length fields - one in the TLSv1 record layer, another in the Client Hello handshake payload and one for each of the cipher suites list and extension list. Each of the length headers is 16 bits long, so should be able to contain any value up to 65535.
    By hand-editing the handshake packet and replaying it, I have discovered that if the value of the TLSv1 record layer length header is <= 255, the Sharepoint server responds correctly. However, if the length header exceeds 255, the Sharepoint server does not respond.
    Under Scientific Linux 6.5, 74 cipher suites (totalling 148 octets) and 5 extensions (totalling 65 octets) are presented by the client, yielding a TLSv1 record layer length of 258 octets.
    Please let me know if I can be of any further help, and if possible it would be useful to have some feedback regarding this issue so that we can keep our customers informed.

    Hi Mark,
    According to your description, my understanding is that the Article Date column displayed with the value based on GMT0 in the Refinement web part.
    Microsoft SharePoint stores date and time values in Coordinated Universal Time (UTC, but also named GMT or Zulu) format, and almost all date and time values that are returned by members of the object model are in UTC format. So the value
    of the Article Date column stores the date and time in UTC format in the database, and the search indexes the UTC value of the Article Date column after crawling the database so that it displays the UTC value in Refinement web part.
    The list column values displayed in the lists that are obtained through the indexer for the SPListItem class are already formatted in the local time for the site so if you’re working on current context list item and fetch a datetime field
    like so SPContext.Current.ListItem["Your-DateTime-Field"] you’ll retrieve a DateTime object according the specified time zone in the regional settings.
    More references:
    http://francoisverbeeck.wordpress.com/2012/05/24/sharepoint-tip-of-the-day-be-careful-when-wor/
    Thanks,
    Victoria
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Victoria Xia
    TechNet Community Support

Maybe you are looking for