BUG: unable to handle kernel NULL pointer dereference at 0000000000000
5月 18 18:18:55 thinkman kernel: [<ffffffff81077683>] do_exit+0x3b3/0xbb0
5月 18 18:18:55 thinkman systemd[1]: Stopping Create Volatile Files and Directories...
5月 18 18:18:55 thinkman systemd[1]: Stopped target Local File Systems.
5月 18 18:18:55 thinkman systemd[1]: Stopping Local File Systems.
5月 18 18:18:55 thinkman systemd[1]: Unmounting Temporary Directory...
5月 18 18:18:55 thinkman systemd[1]: Unmounting /boot...
5月 18 18:18:55 thinkman kernel: BUG: unable to handle kernel NULL pointer dereference at 0000000000000418
5月 18 18:18:55 thinkman kernel: IP: [<ffffffffa04d293f>] pppoe_release+0x15f/0x1d0 [pppoe]
5月 18 18:18:55 thinkman kernel: PGD 0
5月 18 18:18:55 thinkman kernel: Oops: 0000 [#1] PREEMPT SMP
5月 18 18:18:55 thinkman kernel: Modules linked in: veth xt_addrtype xt_conntrack ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_conntrack_ipv4 n月 18 18:18:55 thinkman kernel: rtl_pci rtlwifi crct10dif_pclmul crc32_pclmul mac80211 crc32c_intel ghash_clmulni_intel aesni_intel i915 aes_x86_64 l月 18 18:18:55 thinkman kernel: CPU: 0 PID: 637 Comm: pppd Tainted: G O 4.0.2-1-ARCH #1
5月 18 18:18:55 thinkman kernel: Hardware name: LENOVO 20EH0001CD/20EH0001CD, BIOS J5ET42WW (1.13 ) 01/22/2015
5月 18 18:18:55 thinkman kernel: task: ffff8800ab4d1440 ti: ffff8800a7a00000 task.ti: ffff8800a7a00000
5月 18 18:18:55 thinkman kernel: RIP: 0010:[<ffffffffa04d293f>] [<ffffffffa04d293f>] pppoe_release+0x15f/0x1d0 [pppoe]
5月 18 18:18:55 thinkman kernel: RSP: 0018:ffff8800a7a03be8 EFLAGS: 00010202
5月 18 18:18:55 thinkman kernel: RAX: 0000000000000000 RBX: ffff8802404a9000 RCX: 000000000000002c
5月 18 18:18:55 thinkman kernel: RDX: ffff880244e67810 RSI: 0000000000000200 RDI: ffffffff8145ce02
5月 18 18:18:55 thinkman kernel: RBP: ffff8800a7a03c28 R08: 0000000000000000 R09: 0000000000000000
5月 18 18:18:55 thinkman kernel: R10: ffff880244e67810 R11: 0000000000000001 R12: ffffffffa04d4280
5月 18 18:18:55 thinkman kernel: R13: ffff8800a7e50000 R14: ffff88024596a920 R15: ffff88024215ce40
5月 18 18:18:55 thinkman kernel: FS: 0000000000000000(0000) GS:ffff88024f200000(0000) knlGS:0000000000000000
5月 18 18:18:55 thinkman kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
5月 18 18:18:55 thinkman kernel: CR2: 0000000000000418 CR3: 000000000180b000 CR4: 00000000001407f0
5月 18 18:18:55 thinkman kernel: Stack:
5月 18 18:18:55 thinkman kernel: ffff8800a7e50030 0000000000000008 ffff88024596a920 ffff8800a7e50000
5月 18 18:18:55 thinkman kernel: ffffffffa04d4280 ffff8800a7e50030 ffff88024596a920 ffff88024215ce40
5月 18 18:18:55 thinkman kernel: ffff8800a7a03c48 ffffffff81458c6f ffff880244e67800 0000000000000008
5月 18 18:18:55 thinkman kernel: Call Trace:
5月 18 18:18:55 thinkman kernel: [<ffffffff81458c6f>] sock_release+0x1f/0x90
5月 18 18:18:55 thinkman kernel: [<ffffffff81458cf2>] sock_close+0x12/0x20
5月 18 18:18:55 thinkman kernel: [<ffffffff811da04f>] __fput+0x9f/0x200
5月 18 18:18:55 thinkman kernel: [<ffffffff811da1fe>] ____fput+0xe/0x10
5月 18 18:18:55 thinkman kernel: [<ffffffff810917b4>] task_work_run+0xd4/0xf0
5月 18 18:18:55 thinkman kernel: [<ffffffff81077683>] do_exit+0x3b3/0xbb0
5月 18 18:18:55 thinkman kernel: [<ffffffff81077f0b>] do_group_exit+0x3b/0xb0
5月 18 18:18:55 thinkman kernel: [<ffffffff81083966>] get_signal+0x246/0x670
5月 18 18:18:55 thinkman kernel: [<ffffffff812c1c65>] ? kobject_put+0xc5/0x210
5月 18 18:18:55 thinkman kernel: [<ffffffff810155a7>] do_signal+0x37/0x750
5月 18 18:18:55 thinkman kernel: [<ffffffff811f9110>] ? mntput_no_expire+0x30/0x1d0
5月 18 18:18:55 thinkman kernel: [<ffffffff811f92d4>] ? mntput+0x24/0x40
5月 18 18:18:55 thinkman kernel: [<ffffffff811da0ed>] ? __fput+0x13d/0x200
5月 18 18:18:55 thinkman kernel: [<ffffffff81015d20>] do_notify_resume+0x60/0x80
5月 18 18:18:55 thinkman kernel: [<ffffffff81577763>] int_signal+0x12/0x17
5月 18 18:18:55 thinkman kernel: Code: 89 df e8 15 ab f8 e0 f0 ff 4b 6c 74 3f 31 c0 48 83 c4 18 5b 41 5c 41 5d 41 5e 41 5f 5d c3 66 0f 1f 44 00 00 48 8
5月 18 18:18:55 thinkman kernel: RIP [<ffffffffa04d293f>] pppoe_release+0x15f/0x1d0 [pppoe]
5月 18 18:18:55 thinkman kernel: RSP <ffff8800a7a03be8>
5月 18 18:18:55 thinkman kernel: CR2: 0000000000000418
5月 18 18:18:55 thinkman kernel: ---[ end trace d82e11cf3d48de5d ]---
5月 18 18:18:55 thinkman kernel: Fixing recursive fault but reboot is needed!
5月 18 18:18:55 thinkman systemd[1]: Unmounted Temporary Directory.
5月 18 18:18:55 thinkman systemd[1]: Unmounted /boot.
5月 18 18:18:55 thinkman systemd[1]: Reached target Unmount All Filesystems.
5月 18 18:18:55 thinkman systemd[1]: Starting Unmount All Filesystems.
5月 18 18:18:55 thinkman systemd[1]: Stopped target Local File Systems (Pre).
5月 18 18:18:55 thinkman systemd[1]: Stopping Local File Systems (Pre).
5月 18 18:18:55 thinkman systemd[1]: Stopped Create Static Device Nodes in /dev.
5月 18 18:18:55 thinkman systemd[1]: Stopping Create Static Device Nodes in /dev...
5月 18 18:18:55 thinkman systemd[1]: Stopped Remount Root and Kernel File Systems.
5月 18 18:18:55 thinkman systemd[1]: Stopping Remount Root and Kernel File Systems...
5月 18 18:18:55 thinkman systemd[1]: Reached target Shutdown.
5月 18 18:18:55 thinkman systemd[1]: Starting Shutdown.
5月 18 18:18:55 thinkman systemd[1]: Reached target Final Step.
5月 18 18:18:55 thinkman systemd[1]: Starting Final Step.
5月 18 18:18:55 thinkman systemd[1]: Starting Power-Off...
5月 18 18:18:55 thinkman systemd[1]: Shutting down.
5月 18 18:18:55 thinkman systemd-shutdown[1]: Sending SIGTERM to remaining processes...
5月 18 18:18:55 thinkman systemd-journal[138]: Journal stopped
Head_on_a_Stick wrote:
https://bbs.archlinux.org/viewtopic.php?id=189808 (different error though)
Could be a memory error -- run a memtest.
cxh116 wrote:5月 18 18:18:55 thinkman kernel: Fixing recursive fault but reboot is needed!
Does it reboot successfully?
Also, you really need to read this:
http://www.catb.org/esr/faqs/smart-questions.html
reboot is success.
use pppoe,switch to wifi, has this issue.
hardware: thnkpad e450c 20EH0001CD
$lspci -nn
00:00.0 Host bridge [0600]: Intel Corporation Haswell-ULT DRAM Controller [8086:0a04] (rev 0b)
00:02.0 VGA compatible controller [0300]: Intel Corporation Haswell-ULT Integrated Graphics Controller [8086:0a16] (rev 0b)
00:03.0 Audio device [0403]: Intel Corporation Haswell-ULT HD Audio Controller [8086:0a0c] (rev 0b)
00:14.0 USB controller [0c03]: Intel Corporation 8 Series USB xHCI HC [8086:9c31] (rev 04)
00:16.0 Communication controller [0780]: Intel Corporation 8 Series HECI #0 [8086:9c3a] (rev 04)
00:19.0 Ethernet controller [0200]: Intel Corporation Ethernet Connection I218-V [8086:1559] (rev 04)
00:1b.0 Audio device [0403]: Intel Corporation 8 Series HD Audio Controller [8086:9c20] (rev 04)
00:1c.0 PCI bridge [0604]: Intel Corporation 8 Series PCI Express Root Port 1 [8086:9c10] (rev e4)
00:1c.2 PCI bridge [0604]: Intel Corporation 8 Series PCI Express Root Port 3 [8086:9c14] (rev e4)
00:1c.4 PCI bridge [0604]: Intel Corporation 8 Series PCI Express Root Port 5 [8086:9c18] (rev e4)
00:1c.5 PCI bridge [0604]: Intel Corporation 8 Series PCI Express Root Port 6 [8086:9c1a] (rev e4)
00:1d.0 USB controller [0c03]: Intel Corporation 8 Series USB EHCI #1 [8086:9c26] (rev 04)
00:1f.0 ISA bridge [0601]: Intel Corporation 8 Series LPC Controller [8086:9c43] (rev 04)
00:1f.2 SATA controller [0106]: Intel Corporation 8 Series SATA Controller 1 [AHCI mode] [8086:9c03] (rev 04)
00:1f.3 SMBus [0c05]: Intel Corporation 8 Series SMBus Controller [8086:9c22] (rev 04)
00:1f.6 Signal processing controller [1180]: Intel Corporation 8 Series Thermal [8086:9c24] (rev 04)
04:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. RTL8723BE PCIe Wireless Network Adapter [10ec:b723]
05:00.0 Display controller [0380]: Advanced Micro Devices, Inc. [AMD/ATI] Topaz XT [Radeon R7 M260/M265] [1002:6900]
06:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5227 PCI Express Card Reader [10ec:5227] (rev 01)
Similar Messages
-
Kernel panic "kernel NULL pointer dereference in pacpi_set_dmamode"
Hi. After upgrade to linux-3.6.2-1 my PC fails to boot with this panic: http://imageshack.us/photo/my-images/5/imag0085.jpg/ How do I fix it? I can provide more specific info if needed.
Last edited by thesame (2012-10-31 20:29:41)Stebalien wrote:
thesame wrote:
Stebalien wrote:Bug: http://www.mail-archive.com/linux-kerne … 321125.htm
It's 404
I fixed the link (dropped the l in html).
glenn69 wrote:How do I accomplish this when I cannot get past boot into the OS?
Boot a live cd and chroot (see the wiki on chrooting).
glenn69 wrote:Also, headkase, which log file are you displaying in your post? I can access my disk via a live cd, but cannot find the appropriate log for my machine.
That's the content of the email that I failed to link to properly.
Does anyone know if there is a bug number for this? I'm experiencing this bug on my MacbookPro 7,1 (2010) too (I am forced to use IDE as sata is not supported on this machine in bios compatibility mode afaik).
The title of this thread is rather non descriptive. How about name it something like:
kernel 3.6 panic ("kernel NULL pointer dereference in pacpi_set_dmamode")
Last edited by rwd (2012-10-28 21:37:26) -
Kernel Panic: ...in module "ip" due to a NULL pointer dereference
I already had 2 panic-s in the IP module over the last 24 hours. I am running Solaris Express 11 - snv_151a - 2010.11.
I am trying to:
- decode which function is failing
- determine what's (who since its network) causing them
- find a bug fix for the problem
I have preserved both dumps via snapshots to be analyzed further as needed.
Here's the details:
unix: [ID 836849 kern.notice]
^Mpanic[cpu4]/thread=ffffff005c995c40:
genunix: [ID 335743 kern.notice] BAD TRAP: type=e (#pf Page fault) rp=ffffff005c995040 addr=20 occurred in module "ip" due to a NULL pointer dereference
unix: [ID 100000 kern.notice]
unix: [ID 839527 kern.notice] sched:
unix: [ID 753105 kern.notice] #pf Page fault
unix: [ID 532287 kern.notice] Bad kernel fault at addr=0x20
unix: [ID 243837 kern.notice] pid=0, pc=0xfffffffff7c3f005, sp=0xffffff005c995130, eflags=0x10246
unix: [ID 211416 kern.notice] cr0: 8005003b<pg,wp,ne,et,ts,mp,pe> cr4: 6f8<xmme,fxsr,pge,mce,pae,pse,de>
unix: [ID 624947 kern.notice] cr2: 20
unix: [ID 625075 kern.notice] cr3: 8c00000
unix: [ID 625715 kern.notice] cr8: c
unix: [ID 100000 kern.notice]
unix: [ID 592667 kern.notice] rdi: 0 rsi: ffffff0d5738c3a0 rdx: 1
unix: [ID 592667 kern.notice] rcx: 0 r8: ffffff005c995190 r9: ffffff005c99518c
unix: [ID 592667 kern.notice] rax: 0 rbx: ffffff0df67a1a54 rbp: ffffff005c9952a0
unix: [ID 592667 kern.notice] r10: 0 r11: 46 r12: ffffff0e29547a40
unix: [ID 592667 kern.notice] r13: ffffff0d5738c3a0 r14: 1 r15: ffffff0dbddf2a74
unix: [ID 592667 kern.notice] fsb: 0 gsb: ffffff0d35219080 ds: 4b
unix: [ID 592667 kern.notice] es: 4b fs: 0 gs: 1c3
unix: [ID 592667 kern.notice] trp: e err: 0 rip: fffffffff7c3f005
unix: [ID 592667 kern.notice] cs: 30 rfl: 10246 rsp: ffffff005c995130
unix: [ID 266532 kern.notice] ss: 38
unix: [ID 100000 kern.notice]
genunix: [ID 655072 kern.notice] ffffff005c994f20 unix:die+dd ()
genunix: [ID 655072 kern.notice] ffffff005c995030 unix:trap+1799 ()
genunix: [ID 655072 kern.notice] ffffff005c995040 unix:cmntrap+e6 ()
genunix: [ID 655072 kern.notice] ffffff005c9952a0 ip:tcp_input_data+38ad ()
genunix: [ID 655072 kern.notice] ffffff005c995330 ip:squeue_enter+440 ()
genunix: [ID 655072 kern.notice] ffffff005c995400 ip:ip_fanout_v4+48d ()
genunix: [ID 655072 kern.notice] ffffff005c995480 ip:ire_recv_local_v4+1ce ()
genunix: [ID 655072 kern.notice] ffffff005c995560 ip:ill_input_short_v4+69e ()
genunix: [ID 655072 kern.notice] ffffff005c995790 ip:ip_input+23b ()
genunix: [ID 655072 kern.notice] ffffff005c995820 mac:mac_rx_soft_ring_process+17a ()
genunix: [ID 655072 kern.notice] ffffff005c995960 mac:mac_rx_srs_proto_fanout+46f ()
genunix: [ID 655072 kern.notice] ffffff005c9959e0 mac:mac_rx_srs_drain+26e ()
genunix: [ID 655072 kern.notice] ffffff005c995a70 mac:mac_rx_srs_process+180 ()
genunix: [ID 655072 kern.notice] ffffff005c995ac0 mac:mac_rx_common+94 ()
genunix: [ID 655072 kern.notice] ffffff005c995b10 mac:mac_rx+ac ()
genunix: [ID 655072 kern.notice] ffffff005c995b50 mac:mac_rx_ring+4c ()
genunix: [ID 655072 kern.notice] ffffff005c995b90 igb:igb_intr_rx+5e ()
genunix: [ID 655072 kern.notice] ffffff005c995be0 unix:av_dispatch_autovect+7c ()
genunix: [ID 655072 kern.notice] ffffff005c995c20 unix:dispatch_hardint+33 ()
genunix: [ID 655072 kern.notice] ffffff005c965a10 unix:switch_sp_and_call+13 ()
genunix: [ID 655072 kern.notice] ffffff005c965a60 unix:do_interrupt+b1 ()
genunix: [ID 655072 kern.notice] ffffff005c965a70 unix:cmnint+ba ()
genunix: [ID 655072 kern.notice] ffffff005c965b60 unix:i86_mwait+d ()
genunix: [ID 655072 kern.notice] ffffff005c965bb0 unix:cpu_idle_mwait+f1 ()
genunix: [ID 655072 kern.notice] ffffff005c965be0 unix:cpu_acpi_idle+8d ()
genunix: [ID 655072 kern.notice] ffffff005c965bf0 unix:cpu_idle_adaptive+19 ()
genunix: [ID 655072 kern.notice] ffffff005c965c20 unix:idle+112 ()
genunix: [ID 655072 kern.notice] ffffff005c965c30 unix:thread_start+8 ()
unix: [ID 100000 kern.notice]
genunix: [ID 672855 kern.notice] syncing file systems...
genunix: [ID 904073 kern.notice] done
genunix: [ID 111219 kern.notice] dumping to /dev/zvol/dsk/rpool/dump, offset 65536, content: kernel
ahci: [ID 405573 kern.info] NOTICE: ahci0: ahci_tran_reset_dport port 0 reset port
ahci: [ID 405573 kern.info] NOTICE: ahci0: ahci_tran_reset_dport port 1 reset portI'm not seeing any obvious bugs relating to the stack. There's something similar but it was fixed in b147. Can I suggest and recommend that you raise a Service Request so we can review the data and establish if this is a known or new bug. When creating the new service request it will need to go to the network team so the following will need to be used:
Product: Oracle Solaris Express
Component: Protocols and Routing
Sub-Component: IP - TCP/IP
Once the SR is raised, we'll need the crash dumps and explorer from the host in question.
If the crash dumps are of the form vmcore.n, then please gzip them
If the crash dumps are of the form vmdump.n then they are already in bzip2 format so please do not compress them.
Prefix the filenames with the SR number and upload them to https://supportfiles.sun.com and select "/cores" from the list of options in Step #2
Explorer will collect the configuration from the system which is useful for reviewing alongside the crash dump. It should live in /opt/SUNWexplo/bin/ and can be executed using /opt/SUNWexplo/bin/explorer. If it's not installed, please download it from Doc ID 6972175 - "Oracle Services Tools Bundle (STB) - Explorer, SNEEP, LWACT, RDA"
Regards,
Steve -
Need help: Unable to handle kernel paging request at virtual address; javac
Hi
we're working with apache tomcat under linux mandrake 10. (x86)
when our webapp get recompiled the server stop responding
(web server, telnet, etc... are down, but the server is pingable)
after a hard reboot , we get this message in var/log/messages :
Unable to handle kernel paging request at virtual address 02000064
kernel: printing eip:
kernel: c018e379
kernel: *pde = 00000000
kernel: Oops: 0000 [#1]
kernel: CPU: 1
kernel: EIP: 0060:[proc_pid_stat+137/928] Not tainted VLI
kernel: EIP: 0060:[<c018e379>] Not tainted VLI
kernel: EFLAGS: 00010286
kernel: EIP is at proc_pid_stat+0x89/0x3a0
kernel: eax: 00000000 ebx: 02000000 ecx: d85ac000 edx: 92960700
kernel: esi: d11ea6f0 edi: ded440a0 ebp: cf0ddf44 esp: cf0ddee4
kernel: ds: 007b es: 007b ss: 0068
kernel: Process javac (pid: 2415, threadinfo=cf0dc000 task=d11ea6f0)
kernel: Stack: c0143d5a c1259e78 00000000 c1259e78 c0343980 0000015b 00000000 cf0ddf40
attached ther is kernel messages, pci , dmesg.
Thanks
Massimo TRENTO
Apache Tomcat/4.1.30
j2sdk1.4.2_01
kernel 2.6.3-7mdksmp #1 SMP
--- DMESG ---
00100000 - 000000001f6f0000 (usable)
BIOS-e820: 000000001f6f0000 - 000000001f6fb000 (ACPI data)
BIOS-e820: 000000001f6fb000 - 000000001f700000 (ACPI NVS)
BIOS-e820: 000000001f700000 - 000000001f780000 (usable)
BIOS-e820: 000000001f780000 - 0000000020000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
503MB LOWMEM available.
found SMP MP-table at 000f7920
hm, page 000f7000 reserved twice.
hm, page 000f8000 reserved twice.
hm, page 0009f000 reserved twice.
hm, page 000a0000 reserved twice.
On node 0 totalpages: 128896
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 124800 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
DMI present.
ACPI: RSDP (v000 PTLTD ) @ 0x000f7980
ACPI: RSDT (v001 PTLTD RSDT 0x00050000 LTP 0x00000000) @ 0x1f6f74ed
ACPI: FADT (v001 FSC D156x 0x00050000 0x000f4240) @ 0x1f6f751d
ACPI: MADT (v001 FSC APIC 0x00050000 CSF 0x00000000) @ 0x1f6faf76
ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x00050000 LTP 0x00000001) @ 0x1f6fafd8
ACPI: DSDT (v001 FSC D156x 0x00050000 MSFT 0x0100000e) @ 0x00000000
ACPI: PM-Timer IO Port: 0xf008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:2 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 15:2 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
Using ACPI for processor (LAPIC) configuration information
Intel MultiProcessor Specification v1.1
Virtual Wire compatibility mode.
OEM ID: Product ID: APIC at: 0xFEE00000
I/O APIC #2 Version 32 at 0xFEC00000.
Enabling APIC mode: Flat. Using 1 I/O APICs
Processors: 2
Built 1 zonelists
Kernel command line: auto BOOT_IMAGE=linux-nonfb ro root=301 noapic devfs=mount acpi=ht resume=/dev/hda5
Initializing CPU#0
PID hash table entries: 2048 (order 11: 16384 bytes)
Detected 2793.223 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Memory: 504916k/515584k available (1920k kernel code, 9820k reserved, 892k data, 288k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 5537.79 BogoMIPS
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 225k freed
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU#0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU#0: Thermal monitoring enabled
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
CPU0: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 09
per-CPU timeslice cutoff: 1462.56 usecs.
task migration cache decay timeout: 2 msecs.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Booting processor 1/1 eip 3000
Initializing CPU#1
masked ExtINT on CPU#1
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 5570.56 BogoMIPS
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU#1: Intel P4/Xeon Extended MCE MSRs (12) available
CPU#1: Thermal monitoring enabled
CPU1: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 09
Total of 2 processors activated (11108.35 BogoMIPS).
cpu_sibling_map[0] = 1
cpu_sibling_map[1] = 0
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 2792.0645 MHz.
..... host bus clock speed is 199.0474 MHz.
checking TSC synchronization across 2 CPUs: passed.
Starting migration thread for cpu 0
Starting migration thread for cpu 1
Brought up 1 CPUs
NET: Registered protocol family 16
EISA bus registered
PCI: PCI BIOS revision 2.10 entry at 0xfd8cb, last bus=3
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040211
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
PnPBIOS: Disabled
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
Transparent bridge - 0000:00:1e.0
PCI: Discovered primary peer bus 01 [IRQ]
PCI: Using IRQ router PIIX/ICH [8086/24d0] at 0000:00:1f.0
PCI: IRQ 0 for device 0000:00:1f.1 doesn't match PIRQ mask - try pci=usepirqmask
PCI: Found IRQ 10 for device 0000:00:1f.1
PCI: Sharing IRQ 10 with 0000:00:1d.2
PCI: Sharing IRQ 10 with 0000:00:1f.2
PCI: Sharing IRQ 10 with 0000:02:01.0
SBF: Simple Boot Flag extension found and enabled.
SBF: Setting boot flags 0x1
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: disabled - APM is not SMP safe.
Starting balanced_irq
ikconfig 0.7 with /proc/config*
VFS: Disk quotas dquot_6.5.1
devfs: 2004-01-31 Richard Gooch ([email protected])
devfs: boot_options: 0x1
Initializing Cryptographic API
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
pty: 1024 Unix98 ptys configured
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH5: IDE controller at PCI slot 0000:00:1f.1
PCI: Found IRQ 10 for device 0000:00:1f.1
PCI: Sharing IRQ 10 with 0000:00:1d.2
PCI: Sharing IRQ 10 with 0000:00:1f.2
PCI: Sharing IRQ 10 with 0000:02:01.0
ICH5: chipset revision 2
ICH5: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x3000-0x3007, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x3008-0x300f, BIOS settings: hdc:DMA, hdd:pio
hda: WDC WD800LB-07DNA2, ATA DISK drive
Using anticipatory io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: LITE-ON COMBO LTC-48161H, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
ICH5-SATA: IDE controller at PCI slot 0000:00:1f.2
PCI: Found IRQ 10 for device 0000:00:1f.2
PCI: Sharing IRQ 10 with 0000:00:1d.2
PCI: Sharing IRQ 10 with 0000:00:1f.1
PCI: Sharing IRQ 10 with 0000:02:01.0
ICH5-SATA: chipset revision 2
ICH5-SATA: 100% native mode on irq 10
ide2: BM-DMA at 0x3010-0x3017, BIOS settings: hde:pio, hdf:pio
ide3: BM-DMA at 0x3018-0x301f, BIOS settings: hdg:pio, hdh:pio
hda: max request size: 1024KiB
hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100)
/dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 >
mice: PS/2 mouse device common for all mice
serio: i8042 AUX port at 0x60,0x64 irq 12
input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
EISA: Probing bus 0 at eisa0
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 32768)
NET: Registered protocol family 1
BIOS EDD facility v0.13 2004-Mar-09, 1 devices found
Please report your BIOS at http://linux.dell.com/edd/results.html
PM: Reading pmdisk image.
PM: Resume from disk failed.
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
Mounted devfs on /dev
SCSI subsystem initialized
libata version 1.00 loaded.
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: hda1: orphan cleanup on readonly fs
ext3_orphan_cleanup: deleting unreferenced inode 1038473
ext3_orphan_cleanup: deleting unreferenced inode 1038472
ext3_orphan_cleanup: deleting unreferenced inode 1038471
ext3_orphan_cleanup: deleting unreferenced inode 1038470
ext3_orphan_cleanup: deleting unreferenced inode 1038469
ext3_orphan_cleanup: deleting unreferenced inode 1038467
ext3_orphan_cleanup: deleting unreferenced inode 1038466
ext3_orphan_cleanup: deleting unreferenced inode 1038464
ext3_orphan_cleanup: deleting unreferenced inode 1038463
ext3_orphan_cleanup: deleting unreferenced inode 1038462
ext3_orphan_cleanup: deleting unreferenced inode 1038461
ext3_orphan_cleanup: deleting unreferenced inode 1038460
ext3_orphan_cleanup: deleting unreferenced inode 1038459
ext3_orphan_cleanup: deleting unreferenced inode 1038458
ext3_orphan_cleanup: deleting unreferenced inode 1038457
ext3_orphan_cleanup: deleting unreferenced inode 1038456
ext3_orphan_cleanup: deleting unreferenced inode 1038455
ext3_orphan_cleanup: deleting unreferenced inode 1038454
ext3_orphan_cleanup: deleting unreferenced inode 973782
EXT3-fs: hda1: 19 orphan inodes deleted
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
Mounted devfs on /dev
Freeing unused kernel memory: 288k freed
Real Time Clock Driver v1.12
drivers/usb/core/usb.c: registered new driver usbfs
drivers/usb/core/usb.c: registered new driver hub
drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.1
PCI: Found IRQ 9 for device 0000:00:1d.0
PCI: Sharing IRQ 9 with 0000:00:02.0
PCI: Sharing IRQ 9 with 0000:00:1d.3
uhci_hcd 0000:00:1d.0: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: irq 9, io base 00001400
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
PCI: Found IRQ 11 for device 0000:00:1d.1
uhci_hcd 0000:00:1d.1: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: irq 11, io base 00001800
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
PCI: Found IRQ 10 for device 0000:00:1d.2
PCI: Sharing IRQ 10 with 0000:00:1f.1
PCI: Sharing IRQ 10 with 0000:00:1f.2
PCI: Sharing IRQ 10 with 0000:02:01.0
uhci_hcd 0000:00:1d.2: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: irq 10, io base 00001c00
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
PCI: Found IRQ 9 for device 0000:00:1d.3
PCI: Sharing IRQ 9 with 0000:00:02.0
PCI: Sharing IRQ 9 with 0000:00:1d.0
uhci_hcd 0000:00:1d.3: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: irq 9, io base 00002000
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
PCI: Found IRQ 9 for device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: EHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: irq 9, pci mem e0004000
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 8 ports detected
EXT3 FS on hda1, internal journal
Adding 522072k swap on /dev/hda5. Priority:-1 extents:1
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected an Intel 865 Chipset.
agpgart: Maximum main memory to use for agp memory: 431M
agpgart: Detected 8060K stolen memory.
agpgart: AGP aperture is 128M @ 0xf0000000
Supermount version 2.0.4 for kernel 2.6
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Intel(R) PRO/1000 Network Driver - version 5.2.30.1-k2
Copyright (c) 1999-2004 Intel Corporation.
PCI: Found IRQ 10 for device 0000:02:01.0
PCI: Sharing IRQ 10 with 0000:00:1d.2
PCI: Sharing IRQ 10 with 0000:00:1f.1
PCI: Sharing IRQ 10 with 0000:00:1f.2
PCI: Setting latency timer of device 0000:02:01.0 to 64
eth0: Intel(R) PRO/1000 Network Connection
inserting floppy driver for 2.6.3-7mdksmp
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
hdc: ATAPI 48X DVD-ROM CD-R/RW CD-MRW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
drivers/usb/core/usb.c: registered new driver hiddev
drivers/usb/core/usb.c: registered new driver hid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
NET: Registered protocol family 17
e1000: eth0 NIC Link is Up 100 Mbps Half Duplex
PCI: Found IRQ 5 for device 0000:00:1f.5
PCI: Sharing IRQ 5 with 0000:00:1f.3
PCI: Setting latency timer of device 0000:00:1f.5 to 64
intel8x0_measure_ac97_clock: measured 49851 usecs
intel8x0: clocking to 48000
NET: Registered protocol family 10
Disabled Privacy Extensions on device c037da00(lo)
IPv6 over IPv4 tunneling driver
Installing knfsd (copyright (C) 1996 [email protected]).
atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0).
atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly.
atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0).
atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly.
eth0: no IPv6 routers present
Neighbour table overflow.
Neighbour table overflow.
Neighbour table overflow.
Neighbour table overflow.
Neighbour table overflow.
Neighbour table overflow.
Neighbour table overflow.
Neighbour table overflow.
Neighbour table overflow.
Neighbour table overflow.
printk: 24045 messages suppressed.
Neighbour table overflow.
printk: 24276 messages suppressed.
Neighbour table overflow.
printk: 16555 messages suppressed.
Neighbour table overflow.
Neighbour table overflow.
Neighbour table overflow.
Neighbour table overflow.
Neighbour table overflow.
Neighbour table overflow.
Neighbour table overflow.
Neighbour table overflow.
Neighbour table overflow.
Neighbour table overflow.
printk: 24221 messages suppressed.
Neighbour table overflow.
printk: 24272 messages suppressed.
Neighbour table overflow.
printk: 15931 messages suppressed.
Neighbour table overflow.
Neighbour table overflow.
Neighbour table overflow.
Neighbour table overflow.
Neighbour table overflow.
Neighbour table overflow.
Neighbour table overflow.
Neighbour table overflow.
Neighbour table overflow.
Neighbour table overflow.
printk: 24289 messages suppressed.
Neighbour table overflow.
printk: 21235 messages suppressed.
Neighbour table overflow.
---- LSPCI ---
00:00.0 Host bridge: Intel Corp. 82865G/PE/P Processor to I/O Controller (rev 02)
00:02.0 VGA compatible controller: Intel Corp. 82865G Integrated Graphics Device (rev 02)
00:03.0 PCI bridge: Intel Corp. 82865G/PE/P Processor to PCI to CSA Bridge (rev 02)
00:1d.0 USB Controller: Intel Corp. 82801EB USB (rev 02)
00:1d.1 USB Controller: Intel Corp. 82801EB USB (rev 02)
00:1d.2 USB Controller: Intel Corp. 82801EB USB (rev 02)
00:1d.3 USB Controller: Intel Corp. 82801EB USB (rev 02)
00:1d.7 USB Controller: Intel Corp. 82801EB USB2 (rev 02)
00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB/EB PCI Bridge (rev c2)
00:1f.0 ISA bridge: Intel Corp. 82801EB LPC Interface Controller (rev 02)
00:1f.1 IDE interface: Intel Corp. 82801EB Ultra ATA Storage Controller (rev 02)
00:1f.2 IDE interface: Intel Corp. 82801EB Ultra ATA Storage Controller (rev 02)
00:1f.3 SMBus: Intel Corp. 82801EB SMBus Controller (rev 02)
00:1f.5 Multimedia audio controller: Intel Corp. 82801EB AC'97 Audio Controller (rev 02)
02:01.0 Ethernet controller: Intel Corp.: Unknown device 1019
-- LSMOD --
Module Size Used by
nfsd 175840 8
exportfs 7552 1 nfsd
md5 4864 1
ipv6 251392 29
snd-seq-oss 33568 0
snd-seq-midi-event 8704 1 snd-seq-oss
snd-seq 55696 4 snd-seq-oss,snd-seq-midi-event
snd-pcm-oss 53316 0
snd-mixer-oss 19008 1 snd-pcm-oss
snd-intel8x0 34440 0
snd-ac97-codec 59588 1 snd-intel8x0
snd-pcm 97440 2 snd-pcm-oss,snd-intel8x0
snd-timer 26660 2 snd-seq,snd-pcm
gameport 5664 1 snd-intel8x0
snd-page-alloc 12996 2 snd-intel8x0,snd-pcm
snd-mpu401-uart 8320 1 snd-intel8x0
snd-rawmidi 25248 1 snd-mpu401-uart
snd-seq-device 9032 3 snd-seq-oss,snd-seq,snd-rawmidi
snd 55492 12 snd-seq-oss,snd-seq-midi-event,snd-seq,snd-pcm-oss,snd-mixer-oss,snd-intel8x0,snd-ac97-codec,snd-pcm,snd-timer,snd-mpu401-uart,snd-rawmidi,snd-seq-device
soundcore 10560 1 snd
af_packet 22632 0
hid 55360 0
raw 8640 1
ide-floppy 19776 0
ide-tape 36752 0
ide-cd 41764 0
cdrom 38272 1 ide-cd
floppy 61620 0
e1000 83460 0
supermount 39856 1
intel-agp 18364 1
agpgart 32460 2 intel-agp
ehci-hcd 25572 0
uhci-hcd 31856 0
usbcore 103228 5 hid,ehci-hcd,uhci-hcd
rtc 13640 0
ext3 114216 2
jbd 61976 1 ext3
sd_mod 17696 0
ata_piix 8836 0
libata 40256 1 ata_piix,[permanent]
scsi_mod 117104 2 sd_mod,libata
----- /var/log/kernel/warnings -------
Oct 5 10:16:47 nsilaslin02 kernel: printing eip:
Oct 5 10:16:47 nsilaslin02 kernel: c018e379
Oct 5 10:16:47 nsilaslin02 kernel: Oops: 0000 [#1]
Oct 5 10:16:47 nsilaslin02 kernel: CPU: 1
Oct 5 10:16:47 nsilaslin02 kernel: EIP: 0060:[proc_pid_stat+137/928] Not tainted VLI
Oct 5 10:16:47 nsilaslin02 kernel: EIP: 0060:[<c018e379>] Not tainted VLI
Oct 5 10:16:47 nsilaslin02 kernel: EFLAGS: 00010286
Oct 5 10:16:47 nsilaslin02 kernel: EIP is at proc_pid_stat+0x89/0x3a0
Oct 5 10:16:47 nsilaslin02 kernel: eax: 00000000 ebx: 02000000 ecx: d85ac000 edx: 92960700
Oct 5 10:16:47 nsilaslin02 kernel: esi: d11ea6f0 edi: ded440a0 ebp: cf0ddf44 esp: cf0ddee4
Oct 5 10:16:47 nsilaslin02 kernel: ds: 007b es: 007b ss: 0068
Oct 5 10:16:47 nsilaslin02 kernel: Process javac (pid: 2415, threadinfo=cf0dc000 task=d11ea6f0)
Oct 5 10:16:47 nsilaslin02 kernel: Stack: c0143d5a c1259e78 00000000 c1259e78 c0343980 0000015b 00000000 cf0ddf40
Oct 5 10:16:47 nsilaslin02 kernel: 52143e93 00000000 00000000 00000000 00000000 00000000 00000000 00000000
Oct 5 10:16:47 nsilaslin02 kernel: 00000000 00000000 000000d0 00001000 000000d0 d11ea6f0 00000400 de64f060
Oct 5 10:16:47 nsilaslin02 kernel: Call Trace:
Oct 5 10:16:47 nsilaslin02 kernel: [buffered_rmqueue+234/400] buffered_rmqueue+0xea/0x190
Oct 5 10:16:47 nsilaslin02 kernel: [<c0143d5a>] buffered_rmqueue+0xea/0x190
Oct 5 10:16:47 nsilaslin02 kernel: [proc_info_read+75/320] proc_info_read+0x4b/0x140
Oct 5 10:16:47 nsilaslin02 kernel: [<c018b60b>] proc_info_read+0x4b/0x140
Oct 5 10:16:47 nsilaslin02 kernel: [vfs_read+142/224] vfs_read+0x8e/0xe0
Oct 5 10:16:47 nsilaslin02 kernel: [<c015bf2e>] vfs_read+0x8e/0xe0
Oct 5 10:16:47 nsilaslin02 kernel: [sys_read+46/80] sys_read+0x2e/0x50
Oct 5 10:16:47 nsilaslin02 kernel: [<c015c14e>] sys_read+0x2e/0x50
Oct 5 10:16:47 nsilaslin02 kernel: [sysenter_past_esp+82/121] sysenter_past_esp+0x52/0x79
Oct 5 10:16:47 nsilaslin02 kernel: [<c010b1b9>] sysenter_past_esp+0x52/0x79
Oct 5 10:16:47 nsilaslin02 kernel:
Oct 5 10:16:47 nsilaslin02 kernel: Code: 00 00 8b 7e 68 85 ff 74 09 57 e8 b3 5f f9 ff 59 89 c7 8b 8e 24 03 00 00 85 c9 74 38 8b 81 98 00 00 00 89 45 c8 8b 59 04 8b 51 08 <0f> bf 43 64 0f bf 5b 66 c1 e0 14 09 d8 01 d0 89 c1 c1 e9 14 0f
Oct 5 10:30:32 nsilaslin02 kernel: Linux version 2.6.3-7mdksmp ([email protected]) (gcc version 3.3.2 (Mandrake Linux 10.0 3.3.2-6mdk)) #1 SMP Wed Mar 17 14:24:28 CET 2004
Oct 5 10:30:32 nsilaslin02 kernel: BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
Oct 5 10:30:32 nsilaslin02 kernel: BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
Oct 5 10:30:32 nsilaslin02 kernel: BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
Oct 5 10:30:32 nsilaslin02 kernel: BIOS-e820: 0000000000100000 - 000000001f6f0000 (usable)
Oct 5 10:30:32 nsilaslin02 kernel: BIOS-e820: 000000001f6f0000 - 000000001f6fb000 (ACPI data)
Oct 5 10:30:32 nsilaslin02 kernel: BIOS-e820: 000000001f6fb000 - 000000001f700000 (ACPI NVS)
Oct 5 10:30:32 nsilaslin02 kernel: BIOS-e820: 000000001f700000 - 000000001f780000 (usable)
Oct 5 10:30:32 nsilaslin02 kernel: BIOS-e820: 000000001f780000 - 0000000020000000 (reserved)
Oct 5 10:30:32 nsilaslin02 kernel: BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved)
Oct 5 10:30:32 nsilaslin02 kernel: BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
Oct 5 10:30:32 nsilaslin02 kernel: BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved)
Oct 5 10:30:32 nsilaslin02 kernel: BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
Oct 5 10:30:32 nsilaslin02 kernel: hm, page 000f7000 reserved twice.
Oct 5 10:30:32 nsilaslin02 kernel: hm, page 000f8000 reserved twice.
Oct 5 10:30:32 nsilaslin02 kernel: hm, page 0009f000 reserved twice.
Oct 5 10:30:32 nsilaslin02 kernel: hm, page 000a0000 reserved twice.
Oct 5 10:30:32 nsilaslin02 kernel: On node 0 totalpages: 128896
Oct 5 10:30:32 nsilaslin02 kernel: DMA zone: 4096 pages, LIFO batch:1
Oct 5 10:30:32 nsilaslin02 kernel: Normal zone: 124800 pages, LIFO batch:16
Oct 5 10:30:32 nsilaslin02 kernel: HighMem zone: 0 pages, LIFO batch:1
Oct 5 10:30:33 nsilaslin02 kernel: Processor #0 15:2 APIC version 20
Oct 5 10:30:33 nsilaslin02 kernel: Processor #1 15:2 APIC version 20
Oct 5 10:30:33 nsilaslin02 kernel: Enabling APIC mode: Flat. Using 1 I/O APICs
Oct 5 10:30:33 nsilaslin02 kernel: Built 1 zonelists
Oct 5 10:30:33 nsilaslin02 kernel: Kernel command line: auto BOOT_IMAGE=linux-nonfb ro root=301 noapic devfs=mount acpi=ht resume=/dev/hda5
Oct 5 10:30:33 nsilaslin02 kernel: PID hash table entries: 2048 (order 11: 16384 bytes)
Oct 5 10:30:33 nsilaslin02 kernel: Detected 2793.223 MHz processor.
Oct 5 10:30:33 nsilaslin02 kernel: Console: colour VGA+ 80x25
Oct 5 10:30:33 nsilaslin02 kernel: Checking if this processor honours the WP bit even in supervisor mode... Ok.
Oct 5 10:30:33 nsilaslin02 kernel: Calibrating delay loop... 5537.79 BogoMIPS
Oct 5 10:30:33 nsilaslin02 kernel: Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Oct 5 10:30:33 nsilaslin02 kernel: Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Oct 5 10:30:33 nsilaslin02 kernel: POSIX conformance testing by UNIFIX
Oct 5 10:30:33 nsilaslin02 kernel: CPU0: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 09
Oct 5 10:30:33 nsilaslin02 kernel: per-CPU timeslice cutoff: 1462.56 usecs.
Oct 5 10:30:33 nsilaslin02 kernel: task migration cache decay timeout: 2 msecs.
Oct 5 10:30:33 nsilaslin02 kernel: enabled ExtINT on CPU#0
Oct 5 10:30:33 nsilaslin02 kernel: ESR value before enabling vector: 00000000
Oct 5 10:30:33 nsilaslin02 kernel: ESR value after enabling vector: 00000000
Oct 5 10:30:33 nsilaslin02 kernel: Booting processor 1/1 eip 3000
Oct 5 10:30:33 nsilaslin02 kernel: masked ExtINT on CPU#1
Oct 5 10:30:33 nsilaslin02 kernel: ESR value before enabling vector: 00000000
Oct 5 10:30:33 nsilaslin02 kernel: ESR value after enabling vector: 00000000
Oct 5 10:30:33 nsilaslin02 kernel: Calibrating delay loop... 5570.56 BogoMIPS
Oct 5 10:30:33 nsilaslin02 kernel: CPU1: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 09
Oct 5 10:30:33 nsilaslin02 kernel: cpu_sibling_map[0] = 1
Oct 5 10:30:33 nsilaslin02 kernel: cpu_sibling_map[1] = 0
Oct 5 10:30:33 nsilaslin02 kernel: Using local APIC timer interrupts.
Oct 5 10:30:33 nsilaslin02 kernel: calibrating APIC timer ...
Oct 5 10:30:33 nsilaslin02 kernel: ..... CPU clock speed is 2792.0645 MHz.
Oct 5 10:30:33 nsilaslin02 kernel: ..... host bus clock speed is 199.0474 MHz.
Oct 5 10:30:33 nsilaslin02 kernel: checking TSC synchronization across 2 CPUs: passed.
Oct 5 10:30:33 nsilaslin02 kernel: Starting migration thread for cpu 0
Oct 5 10:30:33 nsilaslin02 kernel: Starting migration thread for cpu 1
Oct 5 10:30:33 nsilaslin02 kernel: Brought up 1 CPUs
Oct 5 10:30:33 nsilaslin02 kernel: PCI: Probing PCI hardware
Oct 5 10:30:33 nsilaslin02 kernel: PCI: Probing PCI hardware (bus 00)
Oct 5 10:30:33 nsilaslin02 kernel: Transparent bridge - 0000:00:1e.0
Oct 5 10:30:33 nsilaslin02 kernel: PCI: IRQ 0 for device 0000:00:1f.1 doesn't match PIRQ mask - try pci=usepirqmask
Oct 5 10:30:33 nsilaslin02 kernel: pty: 1024 Unix98 ptys configured
Oct 5 10:30:33 nsilaslin02 kernel: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Oct 5 10:30:33 nsilaslin02 kernel: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Oct 5 10:30:33 nsilaslin02 kernel: RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize
Oct 5 10:30:33 nsilaslin02 kernel: hda: WDC WD800LB-07DNA2, ATA DISK drive
Oct 5 10:30:33 nsilaslin02 kernel: Using anticipatory io scheduler
Oct 5 10:30:33 nsilaslin02 kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Oct 5 10:30:33 nsilaslin02 kernel: hdc: LITE-ON COMBO LTC-48161H, ATAPI CD/DVD-ROM drive
Oct 5 10:30:33 nsilaslin02 kernel: ide1 at 0x170-0x177,0x376 on irq 15
Oct 5 10:30:33 nsilaslin02 kernel: hda: max request size: 1024KiB
Oct 5 10:30:33 nsilaslin02 kernel: VFS: Mounted root (ext2 filesystem).
Oct 5 10:30:33 nsilaslin02 kernel: PCI: cache line size of 128 is not supported by device 0000:00:1d.7
Oct 5 10:30:33 nsilaslin02 kernel: hdc: ATAPI 48X DVD-ROM CD-R/RW CD-MRW drive, 2048kB Cache, UDMA(33)
Oct 5 10:30:33 nsilaslin02 kernel: ide-floppy driver 0.99.newide
Oct 5 10:30:39 nsilaslin02 kernel: atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0).
Oct 5 10:30:39 nsilaslin02 kernel: atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly.
Oct 5 10:30:39 nsilaslin02 kernel: atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0).
Oct 5 10:30:39 nsilaslin02 kernel: atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly.
Oct 5 10:30:50 nsilaslin02 kernel: Neighbour table overflow.
Oct 5 10:30:50 nsilaslin02 last message repeated 9 times
Oct 5 10:30:55 nsilaslin02 kernel: printk: 24045 messages suppressed.
Oct 5 10:30:55 nsilaslin02 kernel: Neighbour table overflow.
Oct 5 10:31:00 nsilaslin02 kernel: printk: 24276 messages suppressed.
Oct 5 10:31:00 nsilaslin02 kernel: Neighbour table overflow.
Oct 5 10:36:06 nsilaslin02 kernel: printk: 16555 messages suppressed.
Oct 5 10:36:06 nsilaslin02 kernel: Neighbour table overflow.
Oct 5 10:36:06 nsilaslin02 last message repeated 9 times
Oct 5 10:36:11 nsilaslin02 kernel: printk: 24221 messages suppressed.
Oct 5 10:36:11 nsilaslin02 kernel: Neighbour table overflow.
Oct 5 10:36:16 nsilaslin02 kernel: printk: 24272 messages suppressed.
Oct 5 10:36:16 nsilaslin02 kernel: Neighbour table overflow.
Oct 5 10:46:22 nsilaslin02 kernel: printk: 15931 messages suppressed.
Oct 5 10:46:22 nsilaslin02 kernel: Neighbour table overflow.
Oct 5 10:46:22 nsilaslin02 last message repeated 9 times
Oct 5 10:46:27 nsilaslin02 kernel: printk: 24289 messages suppressed.
Oct 5 10:46:27 nsilaslin02 kernel: Neighbour table overflow.
Oct 5 10:46:32 nsilaslin02 kernel: printk: 21235 messages suppressed.
Oct 5 10:46:32 nsilaslin02 kernel: Neighbour table overflow.Java programs are run by a virtual machine which is running in userland. They don't "mess" with the kernel.
OTOH, each userland program interacts with the kernel through system calls, signals, pageing activity, ...
My guess is that it's either broken hardware, or a fault in the linux kernel.
Is the crash reproducible? Does ist always crash with the same error message, at the same "eip" location?
If the crashes are sporadic and non deterministic, with different error messages each time, then I'd say it's
a hardware problem. Otherwise, it could be a linux kernel software problem. -
Occurred in module "ip" due to a NULL pointer dereference
My solaris 10 x86 server would auto reboot 3 to 4 times at each day.
System Config:-
Dual Pentium III 1GHz
VIA Chips Set main board
512MB RAM
LGI SCSI Interface
Hitaichi 73GB SCSI HDD
Seagate 120GB IDE HDD
Intel VGA Display Card
3Com 3c905 Network Card
I removed all RPC and NFS function.
Installed gcc form Solaris CD pack.
And I compiled new Apache 2.0 + php + MySQL + FastCGI in server.
Base this error problem, I have try to install patch(119076-05) and try to re-compile apache. But the error cannot fix.
The BIG PROBLEM is the solaris 10 always auto reboot. Let my some files and MySQL database error.
And I checked /var/adm/message get the following error message. Anyone can help me
Jul 6 12:41:56 tophkweb unix: [ID 836849 kern.notice]
Jul 6 12:41:56 tophkweb ^Mpanic[cpu0]/thread=d45d3000:
Jul 6 12:41:56 tophkweb genunix: [ID 335743 kern.notice] BAD TRAP: type=e (#pf Page fault) rp=d4667acc addr=9d occurred in module "ip" due to a NULL pointer dereference
Jul 6 12:41:56 tophkweb unix: [ID 100000 kern.notice]
Jul 6 12:41:56 tophkweb unix: [ID 839527 kern.notice] httpd:
Jul 6 12:41:56 tophkweb unix: [ID 753105 kern.notice] #pf Page fault
Jul 6 12:41:56 tophkweb unix: [ID 532287 kern.notice] Bad kernel fault at addr=0x9d
Jul 6 12:41:56 tophkweb unix: [ID 243837 kern.notice] pid=271, pc=0xfeaa24b7, sp=0xd6048580, eflags=0x10202
Jul 6 12:41:56 tophkweb unix: [ID 211416 kern.notice] cr0: 8005003b<pg,wp,ne,et,ts,mp,pe> cr4: 6d8<xmme,fxsr,pge,mce,pse,de>
Jul 6 12:41:56 tophkweb unix: [ID 936844 kern.notice] cr2: 9d cr3: 14f02000
Jul 6 12:41:56 tophkweb unix: [ID 537610 kern.notice] gs: fea401b0 fs: fea80000 es: d4520160 ds: ffff0160
Jul 6 12:41:56 tophkweb unix: [ID 537610 kern.notice] edi: d57b43c0 esi: 0 ebp: d4667b18 esp: d4667afc
Jul 6 12:41:56 tophkweb unix: [ID 537610 kern.notice] ebx: d60486c0 edx: d528b900 ecx: 0 eax: a1
Jul 6 12:41:56 tophkweb unix: [ID 537610 kern.notice] trp: e err: 0 eip: feaa24b7 cs: 158
Jul 6 12:41:56 tophkweb unix: [ID 717149 kern.notice] efl: 10202 usp: d6048580 ss: d60486c0
Jul 6 12:41:56 tophkweb unix: [ID 100000 kern.notice]
Jul 6 12:41:56 tophkweb genunix: [ID 353471 kern.notice] d4667a2c unix:die+a7 (e, d4667acc, 9d, 0)
Jul 6 12:41:56 tophkweb genunix: [ID 353471 kern.notice] d4667ab8 unix:trap+f56 (d4667acc, 9d, 0)
Jul 6 12:41:56 tophkweb genunix: [ID 353471 kern.notice] d4667acc unix:cmntrap+83 ()
Jul 6 12:41:56 tophkweb genunix: [ID 353471 kern.notice] d4667b18 ip:tcp_unfuse+2b (d60486c0)
Jul 6 12:41:56 tophkweb genunix: [ID 353471 kern.notice] d4667bf4 ip:tcp_rput_data+4a (d6048580, d57b43c0,)
Jul 6 12:41:56 tophkweb genunix: [ID 353471 kern.notice] d4667c0c ip:tcp_input+39 (d6048580, d57b43c0,)
Jul 6 12:41:56 tophkweb genunix: [ID 353471 kern.notice] d4667c30 ip:squeue_enter+b5 (d3e85f40, d57b43c0,)
Jul 6 12:41:56 tophkweb genunix: [ID 353471 kern.notice] d4667c68 ip:ip_fanout_tcp+38e (d61cd438, d57b43c0,)
Jul 6 12:41:56 tophkweb genunix: [ID 353471 kern.notice] d4667cac ip:ip_wput_local+1bb (d61cd438, da979c54,)
Jul 6 12:41:56 tophkweb genunix: [ID 353471 kern.notice] d4667d48 ip:ip_wput_ire+1436 (d61cd438, d57b43c0,)
Jul 6 12:41:56 tophkweb genunix: [ID 353471 kern.notice] d4667da0 ip:ip_output+70a (d60489c0, d57b43c0,)
Jul 6 12:41:56 tophkweb genunix: [ID 353471 kern.notice] d4667de4 ip:tcp_send_data+5f9 (d6048b00, d61cd438,)
Jul 6 12:41:56 tophkweb genunix: [ID 353471 kern.notice] d4667e04 ip:tcp_xmit_end+88 (d6048b00)
Jul 6 12:41:56 tophkweb genunix: [ID 353471 kern.notice] d4667e20 ip:tcp_close_output+115 (d60489c0, d6048d10,)
Jul 6 12:41:56 tophkweb genunix: [ID 353471 kern.notice] d4667e44 ip:squeue_enter+1bf (d3e85f40, d6048d10,)
Jul 6 12:41:56 tophkweb genunix: [ID 353471 kern.notice] d4667e70 ip:tcp_close+6c (d61cd3b0, 83, dad03)
Jul 6 12:41:56 tophkweb genunix: [ID 353471 kern.notice] d4667e90 genunix:qdetach+8b (d61cd3b0, 1, 83, da)
Jul 6 12:41:56 tophkweb genunix: [ID 353471 kern.notice] d4667ec4 genunix:strclose+2e3 (d45cdcc0, 83, dad03)
Jul 6 12:41:56 tophkweb genunix: [ID 353471 kern.notice] d4667eec sockfs:socktpi_close+d7 (d45cdcc0, 83, 1, 0,)
Jul 6 12:41:56 tophkweb genunix: [ID 353471 kern.notice] d4667f1c genunix:fop_close+26 (d45cdcc0, 83, 1, 0,)
Jul 6 12:41:56 tophkweb genunix: [ID 353471 kern.notice] d4667f58 genunix:closef+56 (d5b7f180)
Jul 6 12:41:56 tophkweb genunix: [ID 353471 kern.notice] d4667f7c genunix:closeandsetf+2e7 (16, 0)
Jul 6 12:41:56 tophkweb genunix: [ID 353471 kern.notice] d4667f8c genunix:close+d (16, 3, fec1d444, d4)
Jul 6 12:41:56 tophkweb unix: [ID 100000 kern.notice]
Jul 6 12:41:56 tophkweb genunix: [ID 672855 kern.notice] syncing file systems...
Jul 6 12:41:56 tophkweb genunix: [ID 733762 kern.notice] 11
Jul 6 12:41:57 tophkweb genunix: [ID 733762 kern.notice] 9
Jul 6 12:41:58 tophkweb genunix: [ID 733762 kern.notice] 6
Jul 6 12:42:18 tophkweb last message repeated 20 times
Jul 6 12:42:19 tophkweb genunix: [ID 622722 kern.notice] done (not all i/o completed)
Jul 6 12:42:20 tophkweb genunix: [ID 111219 kern.notice] dumping to /dev/dsk/c2t0d0s0, offset 214695936, content: kernel
Jul 6 12:42:29 tophkweb genunix: [ID 409368 kern.notice] ^M100% done: 16280 pages dumped, compression ratio 3.06,
Jul 6 12:42:29 tophkweb genunix: [ID 851671 kern.notice] dump succeededI have a server suffering similar symptoms. In fact, it's crashed 16 times since the 29/07/2005! It's been getting worse with more use.
The server runs the latest Big Brother and Apache that shipped with Solaris 10.
The server has the latest patches (via smpatch)
-bash-3.00$ uname -a
SunOS <omitted> 5.10 Generic_118844-08 i86pc i386 i86pc
Jul 27 06:20:32 <omitted> unix: [ID 836849 kern.notice]
Jul 27 06:20:32 <omitted> ^Mpanic[cpu3]/thread=d3b0fa00:
Jul 27 06:20:32 <omitted> genunix: [ID 335743 kern.notice] BAD TRAP: type=e (#pf Page fault) rp=cfba4acc addr=9
d occurred in module "ip" due to a NULL pointer dereference
Jul 27 06:20:32 <omitted> unix: [ID 100000 kern.notice]
Jul 27 06:20:32 <omitted> unix: [ID 839527 kern.notice] bb:
Jul 27 06:20:32 <omitted> unix: [ID 753105 kern.notice] #pf Page fault
Jul 27 06:20:32 <omitted> unix: [ID 532287 kern.notice] Bad kernel fault at addr=0x9d
Jul 27 06:20:32 <omitted> unix: [ID 243837 kern.notice] pid=14256, pc=0xfeb06827, sp=0xd6d20580, eflags=0x10202
Jul 27 06:20:32 <omitted> unix: [ID 211416 kern.notice] cr0: 8005003b<pg,wp,ne,et,ts,mp,pe> cr4: 6d8<xmme,fxsr,
pge,mce,pse,de>
Jul 27 06:20:32 <omitted> unix: [ID 936844 kern.notice] cr2: 9d cr3: 691ea000
Jul 27 06:20:32 <omitted> unix: [ID 537610 kern.notice] gs: feab01b0 fs: feae0000 es: d0860160 ds: ffff
0160
Jul 27 06:20:32 <omitted> unix: [ID 537610 kern.notice] edi: cfd084c0 esi: 0 ebp: cfba4b18 esp: cfba
4afc
Jul 27 06:20:32 <omitted> unix: [ID 537610 kern.notice] ebx: d6d206c0 edx: d3025540 ecx: 0 eax:
81
Jul 27 06:20:32 <omitted> unix: [ID 537610 kern.notice] trp: e err: 0 eip: feb06827 cs:
158
Jul 27 06:20:32 <omitted> unix: [ID 717149 kern.notice] efl: 10202 usp: d6d20580 ss: d6d206c0
Jul 27 06:20:32 <omitted> unix: [ID 100000 kern.notice]
Jul 27 06:20:32 <omitted> genunix: [ID 353471 kern.notice] cfba4a2c unix:die+a7 (e, cfba4acc, 9d, 3)
Jul 27 06:20:32 <omitted> genunix: [ID 353471 kern.notice] cfba4ab8 unix:trap+f56 (cfba4acc, 9d, 3)
Jul 27 06:20:32 <omitted> genunix: [ID 353471 kern.notice] cfba4acc unix:cmntrap+83 ()
Jul 27 06:20:32 <omitted> genunix: [ID 353471 kern.notice] cfba4b18 ip:tcp_unfuse+2b (d6d206c0)
Jul 27 06:20:32 <omitted> genunix: [ID 353471 kern.notice] cfba4bf4 ip:tcp_rput_data+4a (d6d20580, cfd084c0,)
Jul 27 06:20:32 <omitted> genunix: [ID 353471 kern.notice] cfba4c0c ip:tcp_input+39 (d6d20580, cfd084c0,)
Jul 27 06:20:32 <omitted> genunix: [ID 353471 kern.notice] cfba4c30 ip:squeue_enter+b5 (cff74dc0, cfd084c0,)
Jul 27 06:20:32 <omitted> genunix: [ID 353471 kern.notice] cfba4c68 ip:ip_fanout_tcp+38e (d4d2e6b8, cfd084c0,)
Jul 27 06:20:32 <omitted> genunix: [ID 353471 kern.notice] cfba4cac ip:ip_wput_local+1bb (d4d2e6b8, d071f554,)
Jul 27 06:20:32 <omitted> genunix: [ID 353471 kern.notice] cfba4d48 ip:ip_wput_ire+1436 (d4d2e6b8, cfd084c0,)
Jul 27 06:20:32 <omitted> genunix: [ID 353471 kern.notice] cfba4da0 ip:ip_output+70a (d3fef140, cfd084c0,)
Jul 27 06:20:32 <omitted> genunix: [ID 353471 kern.notice] cfba4de4 ip:tcp_send_data+5f9 (d3fef280, d4d2e6b8,)
Jul 27 06:20:32 <omitted> genunix: [ID 353471 kern.notice] cfba4e04 ip:tcp_xmit_end+88 (d3fef280)
Jul 27 06:20:32 <omitted> genunix: [ID 353471 kern.notice] cfba4e20 ip:tcp_close_output+115 (d3fef140, d3fef490
Jul 27 06:20:32 <omitted> genunix: [ID 353471 kern.notice] cfba4e44 ip:squeue_enter+1bf (cff74dc0, d3fef490,)
Jul 27 06:20:32 <omitted> genunix: [ID 353471 kern.notice] cfba4e70 ip:tcp_close+6c (d4d2e630, 3, d156a7)
Jul 27 06:20:32 <omitted> genunix: [ID 353471 kern.notice] cfba4e90 genunix:qdetach+8b (d4d2e630, 1, 3, d15)
Jul 27 06:20:32 <omitted> genunix: [ID 353471 kern.notice] cfba4ec4 genunix:strclose+2e3 (d4c2acc0, 3, d156a7)
Jul 27 06:20:32 <omitted> genunix: [ID 353471 kern.notice] cfba4eec sockfs:socktpi_close+d7 (d4c2acc0, 3, 1, 0,
Jul 27 06:20:32 <omitted> genunix: [ID 353471 kern.notice] cfba4f1c genunix:fop_close+26 (d4c2acc0, 3, 1, 0, )
Jul 27 06:20:32 <omitted> genunix: [ID 353471 kern.notice] cfba4f58 genunix:closef+56 (d38bbbe0)
Jul 27 06:20:32 <omitted> genunix: [ID 353471 kern.notice] cfba4f7c genunix:closeandsetf+2e7 (3, 0)
Jul 27 06:20:32 <omitted> genunix: [ID 353471 kern.notice] cfba4f8c genunix:close+d (3, 5c, d027b0b8, cf)
Jul 27 06:20:32 <omitted> unix: [ID 100000 kern.notice]
Jul 27 06:20:32 <omitted> genunix: [ID 672855 kern.notice] syncing file systems...
Jul 27 06:21:01 <omitted> unix: [ID 836849 kern.notice]
Jul 27 06:21:01 <omitted> ^Mpanic[cpu3]/thread=d3b0fa00: -
Revision: 4619
Author: [email protected]
Date: 2009-01-22 10:47:12 -0800 (Thu, 22 Jan 2009)
Log Message:
Bug: BLZ-313 - HTTPProxyService throws null pointer when non-turnkey BlazeDS app is deployed to Tomcat 6.0.16
QA: Yes
Doc: No
Checkintests: Pass
Ticket Links:
http://bugs.adobe.com/jira/browse/BLZ-313
Modified Paths:
blazeds/trunk/modules/proxy/src/flex/messaging/services/HTTPProxyService.javaI submitted a bug, and this was fixed in the latest trunk
version. -
Mail for MAC - Unable to handle 2 accounts pointing to the same server
Hi,
I have two accounts on MAIL pointing to the same server.
I am unable to send/receive mails from one of them, since they both point to the same SMTP server.
Is this a restriction on MAIL for MAC?
How does one over come this.
I'd written to Apple support and even made an update suggestion.
But obviously they dont care. It''s been over 8 months since I wrote.
And I am seriously going MAD with this problem!
I've even switched 3 ISP.
Please help.
Rayne ManHi BobTheFisherman,
Thanks for responding.
So while I understand how mails work on mail servers with UID's and PWD's ...Here's the deal.
When setting up an account, MAIL asks for the SMTP profile setting, (which includes the SMTP mail server). It then creates the SMTP profile.
So if I have two accounts, I set up account 1 with the mail.xxx.com as mail server.
While setting up the second account, I again use mail.xxx.com (as the SMTP server)
So when if I have set up account 1 as the first account with the SMTP server ... while sending mail from the second account, it takes the the settings of account 1, and then the mail reply comes to account 1 instead of account two.
Does this explain my problem?
Do let me know, cause I reall need an solution.
Thanks again. -
Null pointer exception handling
Hello everybody,
can anyone suggest me that what is the standard way of handling NullPointer exception in OAF controller files.
if you explain with examples i would be very happy.
Thanks a lot
MofizurHi ,
There is only single way to handle the null pointer ,that is
If(value !=null)
// Do the manipulation with value
thanks
Pratap -
Panic with Raw Socket-Page fault in module "ip" due to a NULL pointer deref
I see a panic when using raw sockets with Solaris 10 10/09 (u8). I included a sample program that can cause this issue (panic happens when a udp datagram is received on port 60000). This sample code works as expected with the previous version I was using - 5/08. If I bind with a port number of 0 I don't see the panic but I don't receive anything either.
I believe I have all the latest patches installed. I'd appreciate any assistance in resolving this. Thanks...
^Mpanic[cpu11]/thread=fffffe8000916c60:
BAD TRAP: type=e (#pf Page fault) rp=fffffe80009166c0 addr=83 occurred in module "ip" due to a NULL pointer dereference
sched:
#pf Page fault
Bad kernel fault at addr=0x83
pid=0, pc=0xffffffffedf86a10, sp=0xfffffe80009167b0, eflags=0x10246
cr0: 8005003b<pg,wp,ne,et,ts,mp,pe> cr4: 6f8<xmme,fxsr,pge,mce,pae,pse,de>
cr2: 83 cr3: 1a345000 cr8: c
rdi: ffffffffa7092808 rsi: ffffffffb0094e00 rdx: ffffffffa73c9d40
rcx: 0 r8: fffffe8000916878 r9: fffffe8000916880
rax: 0 rbx: ffffffffb0094e00 rbp: fffffe8000916800
r10: ffffffffa7c18840 r11: ffffffffa73c9d40 r12: fffffe8000916880
r13: ffffffff9b314000 r14: ffffffff9a70b000 r15: 0
fsb: ffffffff80000000 gsb: ffffffff9c52d800 ds: 43
es: 43 fs: 0 gs: 1c3
trp: e err: 0 rip: ffffffffedf86a10
cs: 28 rfl: 10246 rsp: fffffe80009167b0
ss: 30
fffffe80009165d0 unix:die+da ()
fffffe80009166b0 unix:trap+5e6 ()
fffffe80009166c0 unix:_cmntrap+140 ()
fffffe8000916800 ip:ip_udp_check+b0 ()
fffffe80009168b0 ip:ip_udp_input+15a ()
fffffe80009169d0 ip:ip_input+c7c ()
fffffe8000916aa0 dls:i_dls_link_rx+32e ()
fffffe8000916af0 mac:mac_rx+71 ()
fffffe8000916b90 bnx:bnx_recv_ring_recv+113 ()
fffffe8000916ba0 bnx:bnx_rxpkts_intr+17 ()
fffffe8000916bc0 bnx:bnx_intr_recv+58 ()
fffffe8000916bf0 bnx:bnx_intr_1lvl+120 ()
fffffe8000916c40 unix:av_dispatch_autovect+78 ()
fffffe8000916c50 unix:intr_thread+5f ()
EXAMPLE USED TO CAUSE ABOVE PANIC
#include <unistd.h>
#include <stdio.h>
#include <stdlib.h>
#include <sys/socket.h>
#include <arpa/inet.h>
#define BUFFER_SIZE 2048
int main(int argc, char *argv[])
int i, j, sd, iosize;
char *ipbuffer;
struct sockaddr_in saddr, daddr;
ipbuffer = calloc( 1, BUFFER_SIZE );
//if ( ( sd = socket(PF_INET, SOCK_DGRAM, IPPROTO_UDP) ) < 0 ) { // Works
if ( ( sd = socket(PF_INET, SOCK_RAW, IPPROTO_UDP) ) < 0 ) { // Fails
perror("socket() error");
exit(-1);
saddr.sin_family = AF_INET;
saddr.sin_addr.s_addr = inet_addr( "0.0.0.0" );
saddr.sin_port = htons( 60000 );
if ( bind( sd, (struct sockaddr *) &saddr, sizeof( saddr ) ) < 0 ) {
perror("bind() error");
exit(-1);
printf( "Awaiting inbound datagrams...\n" );
for ( i = 1; i <= 10; i++ ) {
j = sizeof( daddr );
iosize = recvfrom( sd, ipbuffer, BUFFER_SIZE, 0, (struct sockaddr *) &daddr, &j );
printf( "Received %d bytes from %s\n", iosize, inet_ntoa( daddr.sin_addr ) );
close( sd );
return( 0 );
}------------------------------------------------------------------This issue could be related. Recommend you open a call with support.
http://bugs.opensolaris.org/bugdatabase/view_bug.do?bug_id=6882984 -
IPQoS panic: BAD TRAP in module "flowacct" due to NULL pointer.
I've recently started using IPQoS and the flowacct module to do some very simple tracking of bandwidth usage (along with one tokenmt action to meter traffic to and from one particular zone) on a host with multiple zones, running Solaris 10 x86, 118844-30. This host has been otherwise stable to date. A couple of hours ago, I got a kernel panic, apparently caused by flowacct:
Dec 21 07:31:46 sol genunix: [ID 335743 kern.notice] BAD TRAP: type=e (#pf Page fault) rp=d6e169a4 addr=8 occurred in module "flowacct" due to a NULL pointer dereference
Dec 21 07:31:46 sol unix: [ID 100000 kern.notice]
Dec 21 07:31:46 sol unix: [ID 839527 kern.notice] named:
Dec 21 07:31:46 sol unix: [ID 753105 kern.notice] #pf Page fault
Dec 21 07:31:46 sol unix: [ID 532287 kern.notice] Bad kernel fault at addr=0x8
Dec 21 07:31:46 sol unix: [ID 243837 kern.notice] pid=22655, pc=0xf7cad802, sp=0xd, eflags=0x10283
Dec 21 07:31:46 sol unix: [ID 211416 kern.notice] cr0: 8005003b<pg,wp,ne,et,ts,mp,pe> cr4: 6d8<xmme,fxsr,pge,mce,pse,de>
Dec 21 07:31:46 sol unix: [ID 936844 kern.notice] cr2: 8 cr3: ab02000
Dec 21 07:31:46 sol unix: [ID 537610 kern.notice] gs: 1b0 fs: d6250000 es: d6e10160 ds: fe870160
Dec 21 07:31:46 sol unix: [ID 537610 kern.notice] edi: d3b25938 esi: d3b26838 ebp: d6e16a18 esp: d6e169d4
Dec 21 07:31:46 sol unix: [ID 537610 kern.notice] ebx: db0853b4 edx: d3b26828 ecx: 0 eax: 0
Dec 21 07:31:46 sol unix: [ID 537610 kern.notice] trp: e err: 2 eip: f7cad802 cs: 158
Dec 21 07:31:46 sol unix: [ID 717149 kern.notice] efl: 10283 usp: d ss: d65fd9c0
Dec 21 07:31:46 sol unix: [ID 100000 kern.notice]
Dec 21 07:31:46 sol genunix: [ID 353471 kern.notice] d6e16904 unix:die+a7 (e, d6e169a4, 8, 0)
Dec 21 07:31:46 sol genunix: [ID 353471 kern.notice] d6e16990 unix:trap+fc8 (d6e169a4, 8, 0)
Dec 21 07:31:46 sol genunix: [ID 353471 kern.notice] d6e169a4 unix:cmntrap+83 ()
Dec 21 07:31:46 sol genunix: [ID 353471 kern.notice] d6e16a18 flowacct:flowacct_update_flows_tbl+337 (d65fd9c0, d3b25000)
Dec 21 07:31:47 sol genunix: [ID 353471 kern.notice] d6e16a34 flowacct:flowacct_process+85 (d6e16a4c, d3b25000)
Dec 21 07:31:47 sol genunix: [ID 353471 kern.notice] d6e16a50 flowacct:flowacct_invoke_action+32 (d, dfa9cd00)
Dec 21 07:31:47 sol genunix: [ID 353471 kern.notice] d6e16a7c genunix:ipp_packet_process+fc (d6e16a94)
Dec 21 07:31:47 sol genunix: [ID 353471 kern.notice] d6e16a9c ip:ip_process+85 (2, d6e16ac8, 2)
Dec 21 07:31:47 sol genunix: [ID 353471 kern.notice] d6e16ac0 ip:ip_wput_attach_llhdr+92 (dccbf020, d92d61f8,)
Dec 21 07:31:47 sol genunix: [ID 353471 kern.notice] d6e16b50 ip:ip_wput_ire+1792 (d7196ee0, dccbf020,)
Dec 21 07:31:47 sol genunix: [ID 353471 kern.notice] d6e16ba8 ip:ip_output+70a (d7414e80, dccbf020,)
Dec 21 07:31:47 sol genunix: [ID 353471 kern.notice] d6e16bc0 ip:ip_wput+14 (d7196ee0, dccbf020)
Dec 21 07:31:47 sol genunix: [ID 353471 kern.notice] d6e16bf4 unix:putnext+1b7 (d7196ee0, dccbf020)
Dec 21 07:31:47 sol genunix: [ID 353471 kern.notice] d6e16c40 udp:udp_wput+380 (d5aabc98, dcf78360)
Dec 21 07:31:47 sol genunix: [ID 353471 kern.notice] d6e16c74 unix:putnext+1b7 (d5aabc98, dcf78360)
Dec 21 07:31:47 sol genunix: [ID 353471 kern.notice] d6e16d54 genunix:strput+16b (d9ad6138, dcf78360,)
Dec 21 07:31:47 sol genunix: [ID 353471 kern.notice] d6e16d90 genunix:kstrputmsg+1df (d5c24cc0, dcf12660,)
Dec 21 07:31:47 sol genunix: [ID 353471 kern.notice] d6e16e0c sockfs:sosend_dgram+1ca (d5c32d60, dc3504d0,)
Dec 21 07:31:47 sol genunix: [ID 353471 kern.notice] d6e16e50 sockfs:sotpi_sendmsg+3f1 (d5c32d60, d6e16ecc,)
Dec 21 07:31:47 sol genunix: [ID 353471 kern.notice] d6e16e90 sockfs:sendit+105 (16, d6e16ecc, d6e16)
Dec 21 07:31:47 sol genunix: [ID 353471 kern.notice] d6e16f8c sockfs:sendmsg+131 (16, ce4d5cc4, 8000,)
I had a single "kstat -m flowacct 90" running at the time, but the timing doesn't particularly coincide. My flowacct setting look like this:
action {
module flowacct
name zone1
params {
global_stats TRUE
timer 10000
timeout 10000
max_limit 2048
next_action continue
Pretty much a cut and paste from the Solaris 10 IPQoS documentation. This configuration didn't suffer any similar problems on a test host.
I've searched various places, not had any joy. Obviously, I'm down a while on kernel patching (ironically, I've been holding off to minimise downtime for users, and now this.) But, while 118855-19 does replace some of objects in question, I see no mention of any particular fix for this problem. I'm going to go ahead with patching to 118855-19 (and whatever else smpatch recommends) within the next few days, but I've disabled IPQoS. I'm a little nervous about switching it back on on a production server. Shame.
Anyone had any similar experiences with flowacct?
Cheers,
Chris.Good news, everyone! A repeat on a test host that's patched up to date as of last week, including kernel 118855-19. I'd tell you what smpatch thinks is missing, but "Failure: Response code was 403".
Dec 23 09:43:14 crippen ^Mpanic[cpu0]/thread=d3275de0:
Dec 23 09:43:14 crippen genunix: [ID 335743 kern.notice] BAD TRAP: type=e (#pf Page fault) rp=d3275924 addr=8 occurred in module "flowacct" due to a NULL pointer dereference
Dec 23 09:43:14 crippen unix: [ID 100000 kern.notice]
Dec 23 09:43:14 crippen unix: [ID 839527 kern.notice] sched:
Dec 23 09:43:14 crippen unix: [ID 753105 kern.notice] #pf Page fault
Dec 23 09:43:14 crippen unix: [ID 532287 kern.notice] Bad kernel fault at addr=0x8
Dec 23 09:43:14 crippen unix: [ID 243837 kern.notice] pid=0, pc=0xf9a413ae, sp=0x6, eflags=0x10286
Dec 23 09:43:14 crippen unix: [ID 211416 kern.notice] cr0: 8005003b<pg,wp,ne,et,ts,mp,pe> cr4: 698<xmme,fxsr,pge,pse,de>
Dec 23 09:43:14 crippen unix: [ID 936844 kern.notice] cr2: 8 cr3: 4cdc000
Dec 23 09:43:14 crippen unix: [ID 537610 kern.notice] gs: fe8801b0 fs: fe830000 es: d4890160 ds: d4890160
Dec 23 09:43:14 crippen unix: [ID 537610 kern.notice] edi: d489b6a0 esi: d489b838 ebp: d32759a0 esp: d327595c
Dec 23 09:43:14 crippen unix: [ID 537610 kern.notice] ebx: d66187f4 edx: d489b828 ecx: 0 eax: 0
Dec 23 09:43:14 crippen unix: [ID 537610 kern.notice] trp: e err: 2 eip: f9a413ae cs: 158
Dec 23 09:43:14 crippen unix: [ID 717149 kern.notice] efl: 10286 usp: 6 ss: d6d35d80
Dec 23 09:43:14 crippen unix: [ID 100000 kern.notice]
Dec 23 09:43:14 crippen genunix: [ID 353471 kern.notice] d3275884 unix:die+a7 (e, d3275924, 8, 0)
Dec 23 09:43:14 crippen genunix: [ID 353471 kern.notice] d3275910 unix:trap+103f (d3275924, 8, 0)
Dec 23 09:43:14 crippen genunix: [ID 353471 kern.notice] d3275924 unix:cmntrap+9a (fe8801b0, fe830000,)
Dec 23 09:43:14 crippen genunix: [ID 353471 kern.notice] d32759a0 flowacct:flowacct_update_flows_tbl+337 (d6d35d80, d489a000)
Dec 23 09:43:14 crippen genunix: [ID 353471 kern.notice] d32759b8 flowacct:flowacct_process+85 (d32759d0, d489a000)
Dec 23 09:43:14 crippen genunix: [ID 353471 kern.notice] d32759d4 flowacct:flowacct_invoke_action+32 (6, d5441f80)
Dec 23 09:43:14 crippen genunix: [ID 353471 kern.notice] d3275a00 genunix:ipp_packet_process+fc (d3275a18)
Dec 23 09:43:14 crippen genunix: [ID 353471 kern.notice] d3275a20 ip:ip_process+85 (2, d3275a4c, 2)
Dec 23 09:43:14 crippen genunix: [ID 353471 kern.notice] d3275a44 ip:ip_wput_attach_llhdr+92 (d5e61fc0, d67b1ad0,)
Dec 23 09:43:14 crippen genunix: [ID 353471 kern.notice] d3275ad0 ip:ip_wput_ire+1aca (d4186c60, d5e61fc0,)
Dec 23 09:43:14 crippen genunix: [ID 353471 kern.notice] d3275b30 ip:ip_output+1715 (da1b7554, d5e61fc0,)
Dec 23 09:43:14 crippen genunix: [ID 353471 kern.notice] d3275b48 ip:ip_wput+14 (d4186c60, d5aaff80)
Dec 23 09:43:14 crippen genunix: [ID 353471 kern.notice] d3275b74 unix:put+164 (d4186c60, d5aaff80)
Dec 23 09:43:14 crippen genunix: [ID 353471 kern.notice] d3275bb0 ip:icmp_inbound+97e (d4186bd8, d5e61fc0,)
Dec 23 09:43:14 crippen genunix: [ID 353471 kern.notice] d3275c00 ip:ip_proto_input+8ae (d4186bd8, d5e61fc0,)
Dec 23 09:43:14 crippen genunix: [ID 353471 kern.notice] d3275c58 ip:ip_input+440 (da1b7554, 0, d5e61f)
Dec 23 09:43:14 crippen genunix: [ID 353471 kern.notice] d3275c80 ip:ip_rput+f7 (d4186bd8, d5e61fc0)
Dec 23 09:43:14 crippen genunix: [ID 353471 kern.notice] d3275cb0 unix:putnext+1b7 (d4186bd8, d5e61fc0)
Dec 23 09:43:14 crippen genunix: [ID 353471 kern.notice] d3275d40 gld:gld_recv_tagged+ed (d4188800, d5e61fc0,)
Dec 23 09:43:14 crippen genunix: [ID 353471 kern.notice] d3275d54 gld:ri_ste_def+2603276e (d4188800, d5e61fc0)
Dec 23 09:43:14 crippen genunix: [ID 353471 kern.notice] d3275d88 iprb:iprb_process_recv+1d4 (d4188800)
Dec 23 09:43:14 crippen genunix: [ID 353471 kern.notice] d3275da0 iprb:iprb_intr+61 (d4188800, d3275ddc,)
Dec 23 09:43:14 crippen genunix: [ID 353471 kern.notice] d3275dac gld:gld_intr+1e (d4188800, 0)
Dec 23 09:43:14 crippen unix: [ID 100000 kern.notice]
Dec 23 09:43:14 crippen genunix: [ID 672855 kern.notice] syncing file systems...
Dec 23 09:43:14 crippen genunix: [ID 733762 kern.notice] 4
Dec 23 09:43:15 crippen genunix: [ID 733762 kern.notice] 3
Dec 23 09:43:16 crippen genunix: [ID 904073 kern.notice] done
Dec 23 09:43:17 crippen genunix: [ID 111219 kern.notice] dumping to /dev/dsk/c0d0s1, offset 214695936, content: kernel
Dec 23 09:43:20 crippen genunix: [ID 409368 kern.notice] ^M100% done: 22636 pages dumped, compression ratio 2.72,
Dec 23 09:43:20 crippen genunix: [ID 851671 kern.notice] dump succeeded -
Java null pointer exception while getting a segment DFF handle
Hi,
my requirement is to make a field mandatory based upon a dff segment value (Y/N). i override PFR since segment is a poplist on the page (and poplists don't fire any event)
i searched in the "view source" of the page and found that segment id is ActFlexField0
when i click on save button i got "java null pointer exception"
here is code:
public void processFormRequest(OAPageContext oapagecontext, OAWebBean oawebbean) throws OAException
+{+
+//get a handle to AM+
OAApplicationModule am;
am = oapagecontext.getRootApplicationModule();
oapagecontext.writeDiagnostics(this,"Root AM=>"oapagecontext.getApplicationModule(oawebbean).getName() ,1);+
if(oapagecontext.getParameter("applyCreActBut") != null || oapagecontext.getParameter("saveDtlBut") != null)
+{+
+/*Conditional mandatoryness of IdContribuente field*/+
+// first, find the flexfield's handle+
OADescriptiveFlexBean oaDFF;
oaDFF = (OADescriptiveFlexBean)oawebbean.findIndexedChildRecursive("ActFlexField");
+//oaDFF.processFlex(oapagecontext);+
oapagecontext.writeDiagnostics(this, "Niccal: i got DFF handle", 1);
+//oapagecontext.writeDiagnostics(this, "Niccal: oamcb value is:"+oaDFF.getAttributeValue(), 1);+
+/*+
RenderingContext con = (RenderingContext) oapagecontext.getRenderingContext();
Enumeration x= null;
x= oaDFF.getChildNames(con);
oapagecontext.writeDiagnostics(this, "After getChild", 1);
while(x.hasMoreElements())
+{+
String aParamName = (String)x.nextElement();
oapagecontext.writeDiagnostics(this, "Niccal: DFF segment names are:"aParamName, 1);+
+//OAWebBean dffbeans=(OAWebBean)oaDFF.findChildRecursive(aParamName);+
+}+
+//oaDFF.mergeSegmentsWithParent(oapagecontext);+
OAMessageChoiceBean oamcb = (OAMessageChoiceBean)oaDFF.findChildRecursive("ActFlexField0");
+//String sIsForeign = (String)oaDFF.getAttributeValue("Attribute1");+
+//oapagecontext.writeDiagnostics(this, "Niccal: Attribute1 is:"+sIsForeign, 1);+
oapagecontext.writeDiagnostics(this, "Niccal: before if", 1);it's urgent
any help appreciated
thanx
Nhi Keerthi,
thank you.
i tried with below code but still unsuccesfully
+ oaDFF = (OADescriptiveFlexBean)oawebbean.findIndexedChildRecursive("ActFlexField");+
oapagecontext.writeDiagnostics(this, "Niccal: i got DFF handle", 1);
OAMessageTextInputBean mtib = (OAMessageTextInputBean)oaDFF.findChildRecursive("ActFlexField0");
oapagecontext.writeDiagnostics(this, "Niccal: before if", 1);
i am able to print 1° comment line but not second. so i think it's something wrong getting the segment handle.
anyway i'm not able to reach your suggested if statement because execution stops before.
Infact, if i comment line :OAMessageTextInputBean mtib = (OAMessageTextInputBean)oaDFF.findChildRecursive("ActFlexField0");
page doesn't give error and saves data.
any suggestion appreciated,
thanx,
N -
How to handle null pointer exception
dEAR ALL
how to handle null pointer exception
public void xxperscompmatchcase(OAPageContext pageContext,
OAWebBean webBean,String cid,String pid)
xxcrmleadperslastnameVOImpl vo=getxxcrmleadperslastnameVO();
xxcrmleadcompnameVOImpl vo1=getxxcrmleadcompnameVO();
vo.setWhereClauseParams(null);
vo1.setWhereClauseParams(null);
vo.setWhereClauseParam(0,pid);
vo1.setWhereClauseParam(0,cid);
vo.executeQuery();
vo1.executeQuery();
String compname="";
String plname="";
if(vo1.first().getAttribute("CompName")!=null)
compname=(String)vo1.first().getAttribute("CompName");
else
compname="";
if((String)vo.first().getAttribute("PersLastname")!=null)
plname=(String)(String)vo.first().getAttribute("PersLastname");
else
plname="";
OAFormattedTextBean p =
(OAFormattedTextBean)webBean.findChildRecursive("personmatchcase");
OAFormattedTextBean b =
(OAFormattedTextBean)webBean.findChildRecursive("matchcase");
b.setValue(pageContext,
"The Lead is matched to company " + compname.toUpperCase());
p.setValue(pageContext,
"The Lead is matched to person " + plname.toUpperCase());
it is going to null pointer exception
how to handle this exceptionHi,
try
//Write your logic here, which can generate any exception
catch(Exception e)
//Write your exception specific code here
Regards,
Reetesh Sharma -
[SOLVED] Rad 7790+Catalyst = Error: unable to open display (null)
Radeon HD 7790 + Catalyst = Error: unable to open display (null)
Greetings,
I've installed Arch 2 days ago(migrated from Fedora), but I'm still a newbie to linux, so please have patience.
I've bought AMD Radeon HD 7790 recently and decided that it's time to upgrade system, but since then I had only problems with it. No LiveCD I tried (Fedora 20, Mint) worked properly in graphics mode, so I suspected problem in built-in drivers and moved to linux with text-only installation (Arch), so I could install drivers later.
I've followed wiki manual and installed catalyst, removed open source driver, added nomodeset parametr to GRUB etc. but I'm still stucked, because Xorg won't start(black screen and errors presented in Logs). Tried googling, but learned nothing except Radeon proprietary drivers are comparable to suicide.
Versions:
Kernel: 3-10.40-1-lts (catalyst_build_module sucessful)
Catalyst: 14.4-10
Xorg: 1.14.5-11
Logs&Configs:
lsmod
fglrx 8672295 0
amd_iommu_v2 7174 1 fglrx
button 4765 1 fglrx
fglrxinfo
Error: unable to open display (null)
Xorg.0.conf
[ 2632.576]
X.Org X Server 1.14.5
Release Date: 2013-12-12
[ 2632.594] X Protocol Version 11, Revision 0
[ 2632.600] Build Operating System: Linux 3.12.6-1-ARCH x86_64
[ 2632.606] Current Operating System: Linux localhost 3.10.40-1-lts #1 SMP Tue May 13 12:50:03 UTC 2014 x86_64
[ 2632.606] Kernel command line: BOOT_IMAGE=/vmlinuz-linux-lts root=UUID=4f60e723-44e9-4264-8d6c-ca62c43cf69c rw quiet nomodeset
[ 2632.619] Build Date: 08 January 2014 01:35:51PM
[ 2632.629]
[ 2632.635] Current version of pixman: 0.32.4
[ 2632.646] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 2632.646] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 2632.671] (==) Log file: "/var/log/Xorg.0.log", Time: Sun May 25 00:53:45 2014
[ 2632.677] (==) Using config file: "/etc/X11/xorg.conf"
[ 2632.684] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 2632.690] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 2632.690] (==) ServerLayout "aticonfig Layout"
[ 2632.690] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 2632.690] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
[ 2632.690] (**) | |-->Device "aticonfig-Device[0]-0"
[ 2632.690] (==) Automatically adding devices
[ 2632.690] (==) Automatically enabling devices
[ 2632.690] (==) Automatically adding GPU devices
[ 2632.690] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 2632.690] Entry deleted from font path.
[ 2632.690] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 2632.690] Entry deleted from font path.
[ 2632.690] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 2632.690] Entry deleted from font path.
[ 2632.690] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 2632.690] Entry deleted from font path.
[ 2632.690] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 2632.690] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 2632.690] Entry deleted from font path.
[ 2632.690] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 2632.690] (==) FontPath set to:
/usr/share/fonts/misc/
[ 2632.690] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 2632.690] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 2632.690] (II) Loader magic: 0x7fac20
[ 2632.690] (II) Module ABI versions:
[ 2632.690] X.Org ANSI C Emulation: 0.4
[ 2632.690] X.Org Video Driver: 14.1
[ 2632.690] X.Org XInput driver : 19.1
[ 2632.691] X.Org Server Extension : 7.0
[ 2632.692] (--) PCI:*(0:2:0:0) 1002:665c:1458:226a rev 0, Mem @ 0xc0000000/268435456, 0xde800000/8388608, 0xdffc0000/262144, I/O @ 0x0000e800/256, BIOS @ 0x????????/131072
[ 2632.698] Initializing built-in extension Generic Event Extension
[ 2632.704] Initializing built-in extension SHAPE
[ 2632.710] Initializing built-in extension MIT-SHM
[ 2632.717] Initializing built-in extension XInputExtension
[ 2632.723] Initializing built-in extension XTEST
[ 2632.728] Initializing built-in extension BIG-REQUESTS
[ 2632.734] Initializing built-in extension SYNC
[ 2632.740] Initializing built-in extension XKEYBOARD
[ 2632.745] Initializing built-in extension XC-MISC
[ 2632.751] Initializing built-in extension SECURITY
[ 2632.756] Initializing built-in extension XINERAMA
[ 2632.761] Initializing built-in extension XFIXES
[ 2632.767] Initializing built-in extension RENDER
[ 2632.772] Initializing built-in extension RANDR
[ 2632.777] Initializing built-in extension COMPOSITE
[ 2632.782] Initializing built-in extension DAMAGE
[ 2632.787] Initializing built-in extension MIT-SCREEN-SAVER
[ 2632.792] Initializing built-in extension DOUBLE-BUFFER
[ 2632.797] Initializing built-in extension RECORD
[ 2632.802] Initializing built-in extension DPMS
[ 2632.806] Initializing built-in extension X-Resource
[ 2632.811] Initializing built-in extension XVideo
[ 2632.816] Initializing built-in extension XVideo-MotionCompensation
[ 2632.821] Initializing built-in extension XFree86-VidModeExtension
[ 2632.825] Initializing built-in extension XFree86-DGA
[ 2632.830] Initializing built-in extension XFree86-DRI
[ 2632.834] Initializing built-in extension DRI2
[ 2632.834] (II) "glx" will be loaded by default.
[ 2632.834] (II) LoadModule: "glx"
[ 2632.834] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 2632.835] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[ 2632.835] compiled for 6.9.0, module version = 1.0.0
[ 2632.839] Loading extension GLX
[ 2632.839] (II) LoadModule: "fglrx"
[ 2632.839] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 2632.863] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[ 2632.863] compiled for 1.4.99.906, module version = 14.10.2
[ 2632.863] Module class: X.Org Video Driver
[ 2632.863] (II) Loading sub module "fglrxdrm"
[ 2632.863] (II) LoadModule: "fglrxdrm"
[ 2632.863] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 2632.863] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 2632.863] compiled for 1.4.99.906, module version = 14.10.2
[ 2632.863] (II) AMD Proprietary Linux Driver Version Identifier:14.10.2
[ 2632.864] (II) AMD Proprietary Linux Driver Release Identifier: 14.10.1006
[ 2632.864] (II) AMD Proprietary Linux Driver Build Date: Apr 17 2014 21:15:33
[ 2632.864] (--) using VT number 2
[ 2632.885] (WW) Falling back to old probe method for fglrx
[ 2632.899] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default
[ 2632.901] ukiDynamicMajor: found major device number 250
[ 2632.901] ukiDynamicMajor: found major device number 250
[ 2632.901] ukiOpenByBusid: Searching for BusID PCI:2:0:0
[ 2632.901] ukiOpenDevice: node name is /dev/ati/card0
[ 2632.901] ukiOpenDevice: open result is 11, (OK)
[ 2632.901] ukiOpenByBusid: ukiOpenMinor returns 11
[ 2632.901] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
[ 2632.904] (--) Chipset Supported AMD Graphics Processor (0x665C) found
[ 2632.904] (WW) fglrx: No matching Device section for instance (BusID PCI:0@2:0:1) found
[ 2632.905] (II) fglrx(0): pEnt->device->identifier=0x11bea10
[ 2632.905] (II) fglrx(0): === [xdl_xs114_atiddxPreInit] === begin
[ 2632.905] (II) Loading sub module "vgahw"
[ 2632.905] (II) LoadModule: "vgahw"
[ 2632.905] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 2632.905] (II) Module vgahw: vendor="X.Org Foundation"
[ 2632.906] compiled for 1.14.5, module version = 0.1.0
[ 2632.906] ABI class: X.Org Video Driver, version 14.1
[ 2632.906] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 2632.906] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 2632.906] (==) fglrx(0): Default visual is TrueColor
[ 2632.906] (**) fglrx(0): Option "DPMS" "true"
[ 2632.906] (==) fglrx(0): RGB weight 888
[ 2632.906] (II) fglrx(0): Using 8 bits per RGB
[ 2632.906] (==) fglrx(0): Buffer Tiling is ON
[ 2632.906] (II) Loading sub module "fglrxdrm"
[ 2632.906] (II) LoadModule: "fglrxdrm"
[ 2632.906] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 2632.906] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 2632.906] compiled for 1.4.99.906, module version = 14.10.2
[ 2632.908] ukiDynamicMajor: found major device number 250
[ 2632.908] ukiDynamicMajor: found major device number 250
[ 2632.908] ukiOpenByBusid: Searching for BusID PCI:2:0:0
[ 2632.908] ukiOpenDevice: node name is /dev/ati/card0
[ 2632.908] ukiOpenDevice: open result is 13, (OK)
[ 2632.908] ukiOpenByBusid: ukiOpenMinor returns 13
[ 2632.908] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
[ 2632.908] (**) fglrx(0): NoAccel = NO
[ 2632.909] (**) fglrx(0): AMD 2D Acceleration Architecture enabled
[ 2632.909] (--) fglrx(0): Chipset: "AMD Radeon HD 7700 Series" (Chipset = 0x665c)
[ 2632.909] (--) fglrx(0): (PciSubVendor = 0x1458, PciSubDevice = 0x226a)
[ 2632.909] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original AMD
[ 2632.909] (--) fglrx(0): Linear framebuffer (phys) at 0xc0000000
[ 2632.909] (--) fglrx(0): MMIO registers at 0xdffc0000
[ 2632.909] (--) fglrx(0): I/O port at 0x0000e800
[ 2632.909] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 2632.909] (II) fglrx(0): AC Adapter is used
[ 2632.914] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[ 2632.914] (II) Loading sub module "vbe"
[ 2632.914] (II) LoadModule: "vbe"
[ 2632.915] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 2632.915] (II) Module vbe: vendor="X.Org Foundation"
[ 2632.915] compiled for 1.14.5, module version = 1.1.0
[ 2632.915] ABI class: X.Org Video Driver, version 14.1
[ 2632.915] (II) fglrx(0): VESA BIOS detected
[ 2632.915] (II) fglrx(0): VESA VBE Version 3.0
[ 2632.915] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[ 2632.915] (II) fglrx(0): VESA VBE OEM: AMD ATOMBIOS
[ 2632.915] (II) fglrx(0): VESA VBE OEM Software Rev: 15.32
[ 2632.915] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2010, Advanced Micro Devices, Inc.
[ 2632.915] (II) fglrx(0): VESA VBE OEM Product: BONAIRE
[ 2632.915] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[ 2632.915] (II) fglrx(0): AMD Video BIOS revision 9 or later detected
[ 2632.915] (--) fglrx(0): Video RAM: 2097152 kByte, Type: GDDR5
[ 2632.915] (II) fglrx(0): PCIE card detected
[ 2632.915] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 2632.915] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 2632.915] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf400000000, MCFBSize = 0x80000000)
[ 2632.915] (II) fglrx(0): RandR 1.2 support is enabled!
[ 2632.915] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 2632.915] (II) Loading sub module "fb"
[ 2632.915] (II) LoadModule: "fb"
[ 2632.916] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 2632.916] (II) Module fb: vendor="X.Org Foundation"
[ 2632.916] compiled for 1.14.5, module version = 1.0.0
[ 2632.916] ABI class: X.Org ANSI C Emulation, version 0.4
[ 2632.916] (II) fglrx(0): EDID Management option: EDID Management is enabled
[ 2632.916] (II) Loading sub module "ddc"
[ 2632.916] (II) LoadModule: "ddc"
[ 2632.916] (II) Module "ddc" already built-in
[ 2633.034] (II) fglrx(0): Output DFP1 using monitor section aticonfig-Monitor[0]-0
[ 2633.034] (II) fglrx(0): Output DFP2 has no monitor section
[ 2633.034] (II) fglrx(0): Output DFP3 has no monitor section
[ 2633.034] (II) fglrx(0): Output DFP4 has no monitor section
[ 2633.034] (II) fglrx(0): Output DFP5 has no monitor section
[ 2633.034] (II) fglrx(0): Output DFP6 has no monitor section
[ 2633.034] (II) fglrx(0): Output DFP7 has no monitor section
[ 2633.034] (II) fglrx(0): Output CRT1 has no monitor section
[ 2633.034] (II) Loading sub module "ddc"
[ 2633.034] (II) LoadModule: "ddc"
[ 2633.034] (II) Module "ddc" already built-in
[ 2633.034] (II) fglrx(0): Connected Display0: CRT1
[ 2633.034] (II) fglrx(0): Display0 EDID data ---------------------------
[ 2633.034] (II) fglrx(0): Manufacturer: GSM Model: 4b31 Serial#: 78077
[ 2633.034] (II) fglrx(0): Year: 2007 Week: 7
[ 2633.034] (II) fglrx(0): EDID Version: 1.3
[ 2633.034] (II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
[ 2633.034] (II) fglrx(0): Sync: Separate Composite SyncOnGreen
[ 2633.034] (II) fglrx(0): Max Image Size [cm]: horiz.: 38 vert.: 30
[ 2633.034] (II) fglrx(0): Gamma: 2.20
[ 2633.034] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[ 2633.034] (II) fglrx(0): First detailed timing is preferred mode
[ 2633.034] (II) fglrx(0): redX: 0.639 redY: 0.342 greenX: 0.297 greenY: 0.615
[ 2633.034] (II) fglrx(0): blueX: 0.146 blueY: 0.068 whiteX: 0.313 whiteY: 0.329
[ 2633.034] (II) fglrx(0): Supported established timings:
[ 2633.034] (II) fglrx(0): 720x400@70Hz
[ 2633.034] (II) fglrx(0): 640x480@60Hz
[ 2633.034] (II) fglrx(0): 640x480@67Hz
[ 2633.034] (II) fglrx(0): 640x480@72Hz
[ 2633.034] (II) fglrx(0): 640x480@75Hz
[ 2633.034] (II) fglrx(0): 800x600@56Hz
[ 2633.034] (II) fglrx(0): 800x600@60Hz
[ 2633.034] (II) fglrx(0): 800x600@72Hz
[ 2633.034] (II) fglrx(0): 800x600@75Hz
[ 2633.034] (II) fglrx(0): 832x624@75Hz
[ 2633.034] (II) fglrx(0): 1024x768@60Hz
[ 2633.034] (II) fglrx(0): 1024x768@70Hz
[ 2633.034] (II) fglrx(0): 1024x768@75Hz
[ 2633.035] (II) fglrx(0): 1280x1024@75Hz
[ 2633.035] (II) fglrx(0): 1152x864@75Hz
[ 2633.035] (II) fglrx(0): Manufacturer's mask: 0
[ 2633.035] (II) fglrx(0): Supported standard timings:
[ 2633.035] (II) fglrx(0): #0: hsize: 640 vsize 480 refresh: 75 vid: 20273
[ 2633.035] (II) fglrx(0): #1: hsize: 800 vsize 600 refresh: 75 vid: 20293
[ 2633.035] (II) fglrx(0): #2: hsize: 1024 vsize 768 refresh: 75 vid: 20321
[ 2633.035] (II) fglrx(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 2633.035] (II) fglrx(0): Supported detailed timing:
[ 2633.035] (II) fglrx(0): clock: 108.0 MHz Image Size: 376 x 301 mm
[ 2633.035] (II) fglrx(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
[ 2633.035] (II) fglrx(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
[ 2633.035] (II) fglrx(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 145 MHz
[ 2633.035] (II) fglrx(0): Monitor name: L1918S
[ 2633.035] (II) fglrx(0): Monitor name:
[ 2633.035] (II) fglrx(0): EDID (in hex):
[ 2633.035] (II) fglrx(0): 00ffffffffffff001e6d314bfd300100
[ 2633.035] (II) fglrx(0): 071101036e261e78eaa2a5a3574c9d25
[ 2633.035] (II) fglrx(0): 115054bfef80314f454f614f81800101
[ 2633.035] (II) fglrx(0): 010101010101302a009851002a403070
[ 2633.035] (II) fglrx(0): 1300782d1100001e000000fd00384b1e
[ 2633.035] (II) fglrx(0): 530e000a202020202020000000fc004c
[ 2633.035] (II) fglrx(0): 31393138530a202020202020000000fc
[ 2633.035] (II) fglrx(0): 00200a202020202020202020202000e7
[ 2633.035] (II) fglrx(0): End of Display0 EDID data --------------------
[ 2633.035] (II) fglrx(0): Dynamic Surface Resizing Enabled
[ 2633.036] (II) fglrx(0): EDID for output DFP1
[ 2633.036] (II) fglrx(0): EDID for output DFP2
[ 2633.036] (II) fglrx(0): EDID for output DFP3
[ 2633.036] (II) fglrx(0): EDID for output DFP4
[ 2633.036] (II) fglrx(0): EDID for output DFP5
[ 2633.036] (II) fglrx(0): EDID for output DFP6
[ 2633.036] (II) fglrx(0): EDID for output DFP7
[ 2633.036] (II) fglrx(0): EDID for output CRT1
[ 2633.036] (II) fglrx(0): Manufacturer: GSM Model: 4b31 Serial#: 78077
[ 2633.036] (II) fglrx(0): Year: 2007 Week: 7
[ 2633.036] (II) fglrx(0): EDID Version: 1.3
[ 2633.036] (II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
[ 2633.036] (II) fglrx(0): Sync: Separate Composite SyncOnGreen
[ 2633.036] (II) fglrx(0): Max Image Size [cm]: horiz.: 38 vert.: 30
[ 2633.036] (II) fglrx(0): Gamma: 2.20
[ 2633.036] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[ 2633.036] (II) fglrx(0): First detailed timing is preferred mode
[ 2633.036] (II) fglrx(0): redX: 0.639 redY: 0.342 greenX: 0.297 greenY: 0.615
[ 2633.036] (II) fglrx(0): blueX: 0.146 blueY: 0.068 whiteX: 0.313 whiteY: 0.329
[ 2633.036] (II) fglrx(0): Supported established timings:
[ 2633.036] (II) fglrx(0): 720x400@70Hz
[ 2633.036] (II) fglrx(0): 640x480@60Hz
[ 2633.036] (II) fglrx(0): 640x480@67Hz
[ 2633.036] (II) fglrx(0): 640x480@72Hz
[ 2633.036] (II) fglrx(0): 640x480@75Hz
[ 2633.036] (II) fglrx(0): 800x600@56Hz
[ 2633.036] (II) fglrx(0): 800x600@60Hz
[ 2633.036] (II) fglrx(0): 800x600@72Hz
[ 2633.036] (II) fglrx(0): 800x600@75Hz
[ 2633.036] (II) fglrx(0): 832x624@75Hz
[ 2633.037] (II) fglrx(0): 1024x768@60Hz
[ 2633.037] (II) fglrx(0): 1024x768@70Hz
[ 2633.037] (II) fglrx(0): 1024x768@75Hz
[ 2633.037] (II) fglrx(0): 1280x1024@75Hz
[ 2633.037] (II) fglrx(0): 1152x864@75Hz
[ 2633.037] (II) fglrx(0): Manufacturer's mask: 0
[ 2633.037] (II) fglrx(0): Supported standard timings:
[ 2633.037] (II) fglrx(0): #0: hsize: 640 vsize 480 refresh: 75 vid: 20273
[ 2633.037] (II) fglrx(0): #1: hsize: 800 vsize 600 refresh: 75 vid: 20293
[ 2633.037] (II) fglrx(0): #2: hsize: 1024 vsize 768 refresh: 75 vid: 20321
[ 2633.037] (II) fglrx(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 2633.037] (II) fglrx(0): Supported detailed timing:
[ 2633.037] (II) fglrx(0): clock: 108.0 MHz Image Size: 376 x 301 mm
[ 2633.037] (II) fglrx(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
[ 2633.037] (II) fglrx(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
[ 2633.037] (II) fglrx(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 145 MHz
[ 2633.037] (II) fglrx(0): Monitor name: L1918S
[ 2633.037] (II) fglrx(0): Monitor name:
[ 2633.037] (II) fglrx(0): EDID (in hex):
[ 2633.037] (II) fglrx(0): 00ffffffffffff001e6d314bfd300100
[ 2633.037] (II) fglrx(0): 071101036e261e78eaa2a5a3574c9d25
[ 2633.037] (II) fglrx(0): 115054bfef80314f454f614f81800101
[ 2633.037] (II) fglrx(0): 010101010101302a009851002a403070
[ 2633.037] (II) fglrx(0): 1300782d1100001e000000fd00384b1e
[ 2633.037] (II) fglrx(0): 530e000a202020202020000000fc004c
[ 2633.037] (II) fglrx(0): 31393138530a202020202020000000fc
[ 2633.037] (II) fglrx(0): 00200a202020202020202020202000e7
[ 2633.037] (II) fglrx(0): Printing probed modes for output CRT1
[ 2633.037] (II) fglrx(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 2633.037] (II) fglrx(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "1280x960"x75.0 135.00 1280 1296 1440 1688 960 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "1280x960"x60.0 108.00 1280 1328 1440 1688 960 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "1280x768"x75.0 135.00 1280 1296 1440 1688 768 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "1280x768"x60.0 108.00 1280 1328 1440 1688 768 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "1280x720"x75.0 135.00 1280 1296 1440 1688 720 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "1280x720"x60.0 108.00 1280 1328 1440 1688 720 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "1024x768"x70.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "800x600"x72.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "800x600"x60.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "800x600"x56.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "640x480"x72.0 31.50 640 656 696 832 480 481 484 520 -hsync -vsync (37.9 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "640x480"x67.0 27.28 640 664 728 816 480 481 484 499 -hsync +vsync (33.4 kHz e)
[ 2633.037] (II) fglrx(0): Modeline "640x480"x60.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 2633.037] (II) fglrx(0): Output DFP1 disconnected
[ 2633.037] (II) fglrx(0): Output DFP2 disconnected
[ 2633.037] (II) fglrx(0): Output DFP3 disconnected
[ 2633.037] (II) fglrx(0): Output DFP4 disconnected
[ 2633.037] (II) fglrx(0): Output DFP5 disconnected
[ 2633.038] (II) fglrx(0): Output DFP6 disconnected
[ 2633.038] (II) fglrx(0): Output DFP7 disconnected
[ 2633.038] (II) fglrx(0): Output CRT1 connected
[ 2633.038] (II) fglrx(0): Using exact sizes for initial modes
[ 2633.038] (II) fglrx(0): Output CRT1 using initial mode 1280x1024
[ 2633.038] (II) fglrx(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 2633.038] (II) fglrx(0): DPI set to (96, 96)
[ 2633.038] (II) fglrx(0): Eyefinity capable adapter detected.
[ 2633.038] (II) fglrx(0): Adapter AMD Radeon HD 7700 Series has 6 configurable heads and 1 displays connected.
[ 2633.038] (==) fglrx(0): PseudoColor visuals disabled
[ 2633.038] (II) Loading sub module "ramdac"
[ 2633.038] (II) LoadModule: "ramdac"
[ 2633.038] (II) Module "ramdac" already built-in
[ 2633.038] (==) fglrx(0): NoDRI = NO
[ 2633.038] (==) fglrx(0): Capabilities: 0x00000000
[ 2633.038] (==) fglrx(0): CapabilitiesEx: 0x00000000
[ 2633.038] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[ 2633.038] (==) fglrx(0): UseFastTLS=0
[ 2633.038] (II) fglrx(0): Shadow Primary option: ShadowPrimary is enabled
[ 2633.038] (--) Depth 24 pixmap format is 32 bpp
[ 2633.038] Loading extension ATIFGLRXDRI
[ 2633.038] (II) fglrx(0): doing swlDriScreenInit
[ 2633.038] (II) fglrx(0): swlDriScreenInit for fglrx driver
[ 2633.039] ukiDynamicMajor: found major device number 250
[ 2633.039] ukiDynamicMajor: found major device number 250
[ 2633.039] ukiDynamicMajor: found major device number 250
[ 2633.039] ukiOpenByBusid: Searching for BusID PCI:2:0:0
[ 2633.039] ukiOpenDevice: node name is /dev/ati/card0
[ 2633.039] ukiOpenDevice: open result is 14, (OK)
[ 2633.039] ukiOpenByBusid: ukiOpenMinor returns 14
[ 2633.039] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
[ 2633.039] (II) fglrx(0): [uki] DRM interface version 1.0
[ 2633.039] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:2:0:0"
[ 2633.039] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x3c000
[ 2633.039] (II) fglrx(0): [uki] mapped SAREA 0x3c000 to 0x7f000fd0d000
[ 2633.039] (II) fglrx(0): [uki] framebuffer handle = 0x3d000
[ 2633.039] (II) fglrx(0): [uki] added 1 reserved context for kernel
[ 2633.039] (II) fglrx(0): swlDriScreenInit done
[ 2633.039] (II) fglrx(0): Kernel Module Version Information:
[ 2633.039] (II) fglrx(0): Name: fglrx
[ 2633.039] (II) fglrx(0): Version: 14.10.2
[ 2633.039] (II) fglrx(0): Date: Apr 17 2014
[ 2633.039] (II) fglrx(0): Desc: AMD FireGL DRM kernel module
[ 2633.039] (II) fglrx(0): Kernel Module version matches driver.
[ 2633.039] (II) fglrx(0): Kernel Module Build Time Information:
[ 2633.039] (II) fglrx(0): Build-Kernel UTS_RELEASE: 3.10.40-1-lts
[ 2633.039] (II) fglrx(0): Build-Kernel MODVERSIONS: yes
[ 2633.039] (II) fglrx(0): Build-Kernel __SMP__: yes
[ 2633.039] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
[ 2633.039] (II) fglrx(0): [uki] register handle = 0x0003e000
[ 2633.040] (II) fglrx(0): DRI initialization successfull
[ 2633.040] (II) fglrx(0): FBADPhys: 0xf400000000 FBMappedSize: 0x01040000
[ 2633.041] (==) fglrx(0): Backing store disabled
[ 2633.041] Loading extension FGLRXEXTENSION
[ 2633.041] (**) fglrx(0): DPMS enabled
[ 2633.041] (II) fglrx(0): Initialized in-driver Xinerama extension
[ 2633.041] (**) fglrx(0): Textured Video is enabled.
[ 2633.041] (II) LoadModule: "glesx"
[ 2633.042] (II) Loading /usr/lib/xorg/modules/glesx.so
[ 2633.043] (II) Module glesx: vendor="X.Org Foundation"
[ 2633.043] compiled for 1.4.99.906, module version = 1.0.0
[ 2633.043] Loading extension GLESX
[ 2633.043] (II) fglrx(0): GLESX enableFlags = 8784
[ 2633.043] (II) fglrx(0): GLESX is enabled
[ 2633.043] (II) LoadModule: "amdxmm"
[ 2633.043] (II) Loading /usr/lib/xorg/modules/amdxmm.so
[ 2633.043] (II) Module amdxmm: vendor="X.Org Foundation"
[ 2633.043] compiled for 1.4.99.906, module version = 2.0.0
[ 2633.055] Loading extension AMDXVOPL
[ 2633.055] Loading extension AMDXVBA
[ 2633.055] (II) fglrx(0): Enable composite support successfully
[ 2633.055] (WW) fglrx(0): Option "VendorName" is not used
[ 2633.055] (WW) fglrx(0): Option "ModelName" is not used
[ 2633.055] (II) fglrx(0): X context handle = 0x1
[ 2633.055] (II) fglrx(0): [DRI] installation complete
[ 2633.055] (==) fglrx(0): Silken mouse enabled
[ 2633.056] (==) fglrx(0): Using HW cursor of display infrastructure!
[ 2633.056] (II) fglrx(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 2633.414] (--) RandR disabled
[ 2633.432] ukiDynamicMajor: found major device number 250
[ 2633.432] ukiDynamicMajor: found major device number 250
[ 2633.432] ukiOpenByBusid: Searching for BusID PCI:2:0:0
[ 2633.432] ukiOpenDevice: node name is /dev/ati/card0
[ 2633.432] ukiOpenDevice: open result is 15, (OK)
[ 2633.432] ukiOpenByBusid: ukiOpenMinor returns 15
[ 2633.432] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
[ 2633.432] (EE) AIGLX error: failed to open /usr/X11R6/lib64/modules/dri/fglrx_dri.so, error[/usr/X11R6/lib64/modules/dri/fglrx_dri.so: cannot open shared object file: No such file or directory]
[ 2633.443] ukiDynamicMajor: found major device number 250
[ 2633.443] ukiDynamicMajor: found major device number 250
[ 2633.443] ukiDynamicMajor: found major device number 250
[ 2633.443] ukiOpenDevice: node name is /dev/ati/card0
[ 2633.443] ukiOpenDevice: open result is 16, (OK)
[ 2633.443] ukiGetBusid returned 'PCI:2:0:0'
[ 2633.443] ukiOpenDevice: node name is /dev/ati/card1
[ 2633.443] ukiOpenDevice: open result is -1, (No such device)
[ 2633.443] ukiOpenDevice: open result is -1, (No such device)
[ 2633.443] ukiOpenDevice: Open failed
[ 2633.443] ukiOpenDevice: node name is /dev/ati/card2
[ 2633.443] ukiOpenDevice: open result is -1, (No such device)
[ 2633.443] ukiOpenDevice: open result is -1, (No such device)
[ 2633.443] ukiOpenDevice: Open failed
[ 2633.443] ukiOpenDevice: node name is /dev/ati/card3
[ 2633.444] ukiOpenDevice: open result is -1, (No such device)
[ 2633.444] ukiOpenDevice: open result is -1, (No such device)
[ 2633.444] ukiOpenDevice: Open failed
[ 2633.444] ukiOpenDevice: node name is /dev/ati/card4
[ 2633.444] ukiOpenDevice: open result is -1, (No such device)
[ 2633.444] ukiOpenDevice: open result is -1, (No such device)
[ 2633.444] ukiOpenDevice: Open failed
[ 2633.444] ukiOpenDevice: node name is /dev/ati/card5
[ 2633.444] ukiOpenDevice: open result is -1, (No such device)
[ 2633.444] ukiOpenDevice: open result is -1, (No such device)
[ 2633.444] ukiOpenDevice: Open failed
[ 2633.444] ukiOpenDevice: node name is /dev/ati/card6
[ 2633.444] ukiOpenDevice: open result is -1, (No such device)
[ 2633.444] ukiOpenDevice: open result is -1, (No such device)
[ 2633.444] ukiOpenDevice: Open failed
[ 2633.444] ukiOpenDevice: node name is /dev/ati/card7
[ 2633.444] ukiOpenDevice: open result is -1, (No such device)
[ 2633.444] ukiOpenDevice: open result is -1, (No such device)
[ 2633.444] ukiOpenDevice: Open failed
[ 2633.444] ukiOpenDevice: node name is /dev/ati/card8
[ 2633.444] ukiOpenDevice: open result is -1, (No such device)
[ 2633.445] ukiOpenDevice: open result is -1, (No such device)
[ 2633.445] ukiOpenDevice: Open failed
[ 2633.445] ukiOpenDevice: node name is /dev/ati/card9
[ 2633.445] ukiOpenDevice: open result is -1, (No such device)
[ 2633.445] ukiOpenDevice: open result is -1, (No such device)
[ 2633.445] ukiOpenDevice: Open failed
[ 2633.445] ukiOpenDevice: node name is /dev/ati/card10
[ 2633.445] ukiOpenDevice: open result is -1, (No such device)
[ 2633.445] ukiOpenDevice: open result is -1, (No such device)
[ 2633.445] ukiOpenDevice: Open failed
[ 2633.445] ukiOpenDevice: node name is /dev/ati/card11
[ 2633.445] ukiOpenDevice: open result is -1, (No such device)
[ 2633.445] ukiOpenDevice: open result is -1, (No such device)
[ 2633.445] ukiOpenDevice: Open failed
[ 2633.445] ukiOpenDevice: node name is /dev/ati/card12
[ 2633.445] ukiOpenDevice: open result is -1, (No such device)
[ 2633.445] ukiOpenDevice: open result is -1, (No such device)
[ 2633.445] ukiOpenDevice: Open failed
[ 2633.445] ukiOpenDevice: node name is /dev/ati/card13
[ 2633.445] ukiOpenDevice: open result is -1, (No such device)
[ 2633.445] ukiOpenDevice: open result is -1, (No such device)
[ 2633.446] ukiOpenDevice: Open failed
[ 2633.446] ukiOpenDevice: node name is /dev/ati/card14
[ 2633.446] ukiOpenDevice: open result is -1, (No such device)
[ 2633.446] ukiOpenDevice: open result is -1, (No such device)
[ 2633.446] ukiOpenDevice: Open failed
[ 2633.446] ukiOpenDevice: node name is /dev/ati/card15
[ 2633.446] ukiOpenDevice: open result is -1, (No such device)
[ 2633.446] ukiOpenDevice: open result is -1, (No such device)
[ 2633.446] ukiOpenDevice: Open failed
[ 2633.446] ukiDynamicMajor: found major device number 250
[ 2633.446] ukiOpenByBusid: Searching for BusID PCI:2:0:0
[ 2633.446] ukiOpenDevice: node name is /dev/ati/card0
[ 2633.446] ukiOpenDevice: open result is 16, (OK)
[ 2633.446] ukiOpenByBusid: ukiOpenMinor returns 16
[ 2633.446] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
[ 2633.525] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
[ 2633.526] ukiDynamicMajor: found major device number 250
[ 2633.526] ukiDynamicMajor: found major device number 250
[ 2633.526] ukiDynamicMajor: found major device number 250
[ 2633.526] ukiOpenDevice: node name is /dev/ati/card0
[ 2633.526] ukiOpenDevice: open result is 17, (OK)
[ 2633.526] ukiGetBusid returned 'PCI:2:0:0'
[ 2633.526] ukiOpenDevice: node name is /dev/ati/card1
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: Open failed
[ 2633.526] ukiOpenDevice: node name is /dev/ati/card2
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: Open failed
[ 2633.526] ukiOpenDevice: node name is /dev/ati/card3
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: Open failed
[ 2633.526] ukiOpenDevice: node name is /dev/ati/card4
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: Open failed
[ 2633.526] ukiOpenDevice: node name is /dev/ati/card5
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: Open failed
[ 2633.526] ukiOpenDevice: node name is /dev/ati/card6
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: Open failed
[ 2633.526] ukiOpenDevice: node name is /dev/ati/card7
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: Open failed
[ 2633.526] ukiOpenDevice: node name is /dev/ati/card8
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: Open failed
[ 2633.526] ukiOpenDevice: node name is /dev/ati/card9
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.526] ukiOpenDevice: open result is -1, (No such device)
[ 2633.527] ukiOpenDevice: Open failed
[ 2633.527] ukiOpenDevice: node name is /dev/ati/card10
[ 2633.527] ukiOpenDevice: open result is -1, (No such device)
[ 2633.527] ukiOpenDevice: open result is -1, (No such device)
[ 2633.527] ukiOpenDevice: Open failed
[ 2633.527] ukiOpenDevice: node name is /dev/ati/card11
[ 2633.527] ukiOpenDevice: open result is -1, (No such device)
[ 2633.527] ukiOpenDevice: open result is -1, (No such device)
[ 2633.527] ukiOpenDevice: Open failed
[ 2633.527] ukiOpenDevice: node name is /dev/ati/card12
[ 2633.527] ukiOpenDevice: open result is -1, (No such device)
[ 2633.527] ukiOpenDevice: open result is -1, (No such device)
[ 2633.527] ukiOpenDevice: Open failed
[ 2633.527] ukiOpenDevice: node name is /dev/ati/card13
[ 2633.527] ukiOpenDevice: open result is -1, (No such device)
[ 2633.527] ukiOpenDevice: open result is -1, (No such device)
[ 2633.527] ukiOpenDevice: Open failed
[ 2633.527] ukiOpenDevice: node name is /dev/ati/card14
[ 2633.527] ukiOpenDevice: open result is -1, (No such device)
[ 2633.527] ukiOpenDevice: open result is -1, (No such device)
[ 2633.527] ukiOpenDevice: Open failed
[ 2633.527] ukiOpenDevice: node name is /dev/ati/card15
[ 2633.527] ukiOpenDevice: open result is -1, (No such device)
[ 2633.527] ukiOpenDevice: open result is -1, (No such device)
[ 2633.527] ukiOpenDevice: Open failed
[ 2633.527] ukiDynamicMajor: found major device number 250
[ 2633.527] ukiOpenByBusid: Searching for BusID PCI:2:0:0
[ 2633.527] ukiOpenDevice: node name is /dev/ati/card0
[ 2633.527] ukiOpenDevice: open result is 17, (OK)
[ 2633.527] ukiOpenByBusid: ukiOpenMinor returns 17
[ 2633.527] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
[ 2633.546] (II) fglrx(0): OverDrive6 Detected!
[ 2633.551] (II) fglrx(0): Setting screen physical size to 338 x 270
[ 2633.594] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 2633.594] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 2633.594] (II) LoadModule: "evdev"
[ 2633.595] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 2633.595] (II) Module evdev: vendor="X.Org Foundation"
[ 2633.595] compiled for 1.14.3, module version = 2.8.2
[ 2633.595] Module class: X.Org XInput Driver
[ 2633.595] ABI class: X.Org XInput driver, version 19.1
[ 2633.595] (II) Using input driver 'evdev' for 'Power Button'
[ 2633.595] (**) Power Button: always reports core events
[ 2633.595] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 2633.595] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 2633.595] (--) evdev: Power Button: Found keys
[ 2633.595] (II) evdev: Power Button: Configuring as keyboard
[ 2633.595] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 2633.595] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 2633.595] (**) Option "xkb_rules" "evdev"
[ 2633.595] (**) Option "xkb_model" "pc104"
[ 2633.595] (**) Option "xkb_layout" "us"
[ 2633.634] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 2633.634] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 2633.634] (II) Using input driver 'evdev' for 'Power Button'
[ 2633.634] (**) Power Button: always reports core events
[ 2633.634] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 2633.634] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 2633.634] (--) evdev: Power Button: Found keys
[ 2633.634] (II) evdev: Power Button: Configuring as keyboard
[ 2633.634] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
[ 2633.634] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 2633.634] (**) Option "xkb_rules" "evdev"
[ 2633.634] (**) Option "xkb_model" "pc104"
[ 2633.634] (**) Option "xkb_layout" "us"
[ 2633.635] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/event1)
[ 2633.635] (**) Logitech USB-PS/2 Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 2633.635] (II) Using input driver 'evdev' for 'Logitech USB-PS/2 Optical Mouse'
[ 2633.635] (**) Logitech USB-PS/2 Optical Mouse: always reports core events
[ 2633.635] (**) evdev: Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event1"
[ 2633.635] (--) evdev: Logitech USB-PS/2 Optical Mouse: Vendor 0x46d Product 0xc051
[ 2633.635] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found 12 mouse buttons
[ 2633.635] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s)
[ 2633.635] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found relative axes
[ 2633.635] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found x and y relative axes
[ 2633.635] (II) evdev: Logitech USB-PS/2 Optical Mouse: Configuring as mouse
[ 2633.635] (II) evdev: Logitech USB-PS/2 Optical Mouse: Adding scrollwheel support
[ 2633.635] (**) evdev: Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
[ 2633.635] (**) evdev: Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 2633.635] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.0/input/input1/event1"
[ 2633.635] (II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE, id 8)
[ 2633.635] (II) evdev: Logitech USB-PS/2 Optical Mouse: initialized for relative axes.
[ 2633.635] (**) Logitech USB-PS/2 Optical Mouse: (accel) keeping acceleration scheme 1
[ 2633.635] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration profile 0
[ 2633.635] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration factor: 2.000
[ 2633.635] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration threshold: 4
[ 2633.635] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/mouse0)
[ 2633.635] (II) No input driver specified, ignoring this device.
[ 2633.636] (II) This device may have been added with another device file.
[ 2633.636] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event5)
[ 2633.636] (II) No input driver specified, ignoring this device.
[ 2633.636] (II) This device may have been added with another device file.
[ 2633.636] (II) config/udev: Adding input device HDA NVidia Line Out (/dev/input/event6)
[ 2633.636] (II) No input driver specified, ignoring this device.
[ 2633.636] (II) This device may have been added with another device file.
[ 2633.636] (II) config/udev: Adding input device HDA NVidia Line (/dev/input/event7)
[ 2633.636] (II) No input driver specified, ignoring this device.
[ 2633.636] (II) This device may have been added with another device file.
[ 2633.637] (II) config/udev: Adding input device HDA NVidia Rear Mic (/dev/input/event8)
[ 2633.637] (II) No input driver specified, ignoring this device.
[ 2633.637] (II) This device may have been added with another device file.
[ 2633.637] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=10 (/dev/input/event10)
[ 2633.637] (II) No input driver specified, ignoring this device.
[ 2633.637] (II) This device may have been added with another device file.
[ 2633.637] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=9 (/dev/input/event11)
[ 2633.637] (II) No input driver specified, ignoring this device.
[ 2633.637] (II) This device may have been added with another device file.
[ 2633.638] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=8 (/dev/input/event12)
[ 2633.638] (II) No input driver specified, ignoring this device.
[ 2633.638] (II) This device may have been added with another device file.
[ 2633.638] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=7 (/dev/input/event13)
[ 2633.638] (II) No input driver specified, ignoring this device.
[ 2633.638] (II) This device may have been added with another device file.
[ 2633.638] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=3 (/dev/input/event14)
[ 2633.638] (II) No input driver specified, ignoring this device.
[ 2633.638] (II) This device may have been added with another device file.
[ 2633.638] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=11 (/dev/input/event9)
[ 2633.639] (II) No input driver specified, ignoring this device.
[ 2633.639] (II) This device may have been added with another device file.
[ 2633.639] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 2633.639] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 2633.639] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 2633.639] (**) AT Translated Set 2 keyboard: always reports core events
[ 2633.639] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 2633.639] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 2633.639] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 2633.639] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 2633.639] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 2633.639] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[ 2633.639] (**) Option "xkb_rules" "evdev"
[ 2633.639] (**) Option "xkb_model" "pc104"
[ 2633.639] (**) Option "xkb_layout" "us"
[ 2633.640] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[ 2633.640] (II) No input driver specified, ignoring this device.
[ 2633.640] (II) This device may have been added with another device file.
[ 2635.885] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[ 2639.300] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 2639.300] (II) fglrx(0): Backup framebuffer data.
[ 2639.333] (II) fglrx(0): Backup complete.
[ 2653.729] (II) evdev: AT Translated Set 2 keyboard: Close
[ 2653.730] (II) UnloadModule: "evdev"
[ 2653.730] (II) evdev: Logitech USB-PS/2 Optical Mouse: Close
[ 2653.730] (II) UnloadModule: "evdev"
[ 2653.730] (II) evdev: Power Button: Close
[ 2653.730] (II) UnloadModule: "evdev"
[ 2653.730] (II) evdev: Power Button: Close
[ 2653.730] (II) UnloadModule: "evdev"
[ 2653.732] (II) fglrx(0): Shutdown CMMQS
[ 2653.735] (II) fglrx(0): [uki] removed 1 reserved context for kernel
[ 2653.735] (II) fglrx(0): [uki] unmapping 8192 bytes of SAREA 0x3c000 at 0x7f000fd0d000
[ 2653.735] (EE)
[ 2653.740] (EE) Backtrace:
[ 2653.745] (EE) 0: Xorg (xorg_backtrace+0x3d) [0x57e04d]
[ 2653.750] (EE) 1: Xorg (0x400000+0x181da9) [0x581da9]
[ 2653.754] (EE) 2: /usr/lib/libpthread.so.0 (0x7f000f1e8000+0xf4b0) [0x7f000f1f74b0]
[ 2653.759] (EE) 3: /usr/lib/libpciaccess.so.0 (0x7f000f406000+0x503e) [0x7f000f40b03e]
[ 2653.765] (EE) 4: /usr/lib/xorg/modules/drivers/fglrx_drv.so (amd_xs113_int10_x_inb+0x46) [0x7f000bb46126]
[ 2653.771] (EE) 5: /usr/lib/xorg/modules/drivers/fglrx_drv.so (0x7f000b15c000+0x9e2e05) [0x7f000bb3ee05]
[ 2653.776] (EE) 6: /usr/lib/xorg/modules/drivers/fglrx_drv.so (X86EMU_exec+0xa5) [0x7f000bb32555]
[ 2653.782] (EE) 7: /usr/lib/xorg/modules/drivers/fglrx_drv.so (amd_xs113_int10_xf86ExecX86int10+0x46) [0x7f000bb47286]
[ 2653.788] (EE) 8: /usr/lib/xorg/modules/drivers/fglrx_drv.so (xf86ExecX86int10+0xd) [0x7f000b56897d]
[ 2653.793] (EE) 9: /usr/lib/xorg/modules/libvbe.so (VBESetVBEMode+0x9d) [0x7f000ab0163d]
[ 2653.799] (EE) 10: /usr/lib/xorg/modules/drivers/fglrx_drv.so (0x7f000b15c000+0x441623) [0x7f000b59d623]
[ 2653.805] (EE) 11: /usr/lib/xorg/modules/drivers/fglrx_drv.so (atiddxVBESetConsoleMode+0x44) [0x7f000b59d474]
[ 2653.811] (EE) 12: /usr/lib/xorg/modules/drivers/fglrx_drv.so (xdl_xs114_atiddxFreeScreen+0x73e) [0x7f000b6ffc1e]
[ 2653.817] (EE) 13: /usr/lib/xorg/modules/drivers/fglrx_drv.so (xdl_xs114_atiddxCloseScreen+0x321) [0x7f000b6ff241]
[ 2653.823] (EE) 14: /usr/lib/xorg/modules/drivers/fglrx_drv.so (0x7f000b15c000+0xa4a846) [0x7f000bba6846]
[ 2653.828] (EE) 15: Xorg (0x400000+0xc3136) [0x4c3136]
[ 2653.833] (EE) 16: Xorg (0x400000+0x106964) [0x506964]
[ 2653.838] (EE) 17: Xorg (0x400000+0x24cd7) [0x424cd7]
[ 2653.843] (EE) 18: /usr/lib/libc.so.6 (__libc_start_main+0xf0) [0x7f000e058000]
[ 2653.848] (EE) 19: Xorg (0x400000+0x24f0f) [0x424f0f]
[ 2653.857] (EE)
[ 2653.861] (EE) Segmentation fault at address 0x0
[ 2653.866] (EE)
Fatal server error:
[ 2653.874] (EE) Caught signal 11 (Segmentation fault). Server aborting
[ 2653.878] (EE)
[ 2653.883] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 2653.899] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 2653.904] (EE)
[ 2653.908] (EE) Server terminated with error (1). Closing log file.
xorg.conf
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
EndSection
Section "Module"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
BusID "PCI:2:0:0"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
I'm sure that the main problem is between keyboard and chair, but I'd like to know, what's wrong with pc
Thanks for your efforts.
Last edited by Mytrin (2014-05-25 19:09:02)I've managed to solve this error:
(EE) AIGLX error: failed to open /usr/X11R6/lib64/modules/dri/fglrx_dri.so, error[/usr/X11R6/lib64/modules/dri/fglrx_dri.so: cannot open shared object file: No such file or directory
There was missing library and few directories, which I found according to this http://www.reddit.com/r/archlinux/comme … _correctly at /usr/lib/dri, so I had to just symlink it. However, "unable to open display" error is still annoying me and Xorg is not working.
EDIT: Found EE about missing commands in new Xorg.0.log and installed xterm to solve this. Now I don't have entirely black screen after startx. There is white rectangular terminal and fglrxinfo seems to be all right as it detected my Radeon and OpenGL. Now I have to install some DE, but that's another story. Marking as [SOLVED] and once again thanks to clfarron4 for reply.
Last edited by Mytrin (2014-05-25 19:06:09) -
Can't Find Null Pointer Exception
Hey, guys! I've spent a couple of hours trying to figure this out, and I've been unable. When I run my program, I get a long list of errors that basically says I have a NullPointerException at Line 160 in LevelRenderer. I can't figure out what is null after tons of analyzing and experimenting, so I was wondering if one of you could assist me with this.
First, here is the runtime error code:
Game Update Error: java.lang.NullPointerException
Exception in thread "AWT-EventQueue-0" java.lang.NullPointerException
at LevelRenderer.paint(LevelRenderer.java:160)
at javax.swing.RepaintManager.paintDirtyRegions(RepaintManager.java:796)
at javax.swing.RepaintManager.paintDirtyRegions(RepaintManager.java:713)
at javax.swing.RepaintManager.seqPaintDirtyRegions(RepaintManager.java:6
93)
at javax.swing.SystemEventQueueUtilities$ComponentWorkRequest.run(System
EventQueueUtilities.java:125)
at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:641)
at java.awt.EventQueue.access$000(EventQueue.java:84)
at java.awt.EventQueue$1.run(EventQueue.java:602)
at java.awt.EventQueue$1.run(EventQueue.java:600)
at java.security.AccessController.doPrivileged(Native Method)
at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessCo
ntrolContext.java:87)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:611)
at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThre
ad.java:269)
at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.
java:184)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThre
ad.java:174)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)Here's the code for the classes that are relevant to the issue. The runtime code is pointing me to the paint method's call of myLevel.drawLevel(gr, 0, 0):
Here's the class that is giving me the error:
/* This class's job is to render a level object.
* The class will keep track of the top left coordinate of the space in which the player is moving
* and how far the right side of the screen is. It will then draw the player always in the center
* of the screen and allow the player to move the character. The character will animate with calls
* to the Player class and also detect collision against the character. If there are collisions, then the
* player will either fall or be unable to move. It will keep the screen image a little bit rendered
* beyond the screen so that when the player moves, it will be able to still be visible until the next tile
* is reached. It will update the screen every time the player moves and reference the level's collision
* map for all of the collisions.
import java.awt.*;
import java.awt.event.*;
import java.awt.image.*;
import java.io.*;
import javax.imageio.*;
import javax.swing.JFrame;
import javax.swing.*;
import java.util.Random;
import java.awt.Color;
public class LevelRenderer extends JFrame
// CONSTANTS
private final int TILE_SIZE = 14;
private final int SCREEN_WIDTH = 1280;
private final int SCREEN_HEIGHT = 768;
// END OF CONSTANTS
// will be used as a buffer before everything is drawn to the screen
private BufferedImage buffer;
// character object
private Player myPlayer;
// level object
private Level myLevel;
// screen object
private Screen s;
// graphics object of the buffer
private Graphics gr;
// boolean to determine when to end the game
private boolean endGame;
// CONSTRUCTOR
public LevelRenderer()
setPreferredSize(new Dimension(1280, 768));
setFocusable(true);
requestFocus();
setResizable(false);
addKeyListener( new KeyAdapter()
public void keyPressed(KeyEvent e)
processKey(e);
public void keyReleased(KeyEvent e)
processRelease(e);
buffer = new BufferedImage(1280, 768, BufferedImage.TYPE_INT_ARGB);
buffer.createGraphics();
gr = buffer.getGraphics();
myPlayer = new Player();
Level myLevel = new Level("obstaclemap");
endGame = false;
// method to simply load an image from a path
public static BufferedImage loadImage(String ref)
BufferedImage bimg = null;
try
bimg = ImageIO.read(new File(ref));
catch (Exception e)
e.printStackTrace();
return bimg;
// Run method for class
public void run(DisplayMode dm)
setBackground(Color.WHITE);
s = new Screen();
try
s.setFullScreen(dm, this);
catch (Exception ex)
System.out.println("Error creating rendered tiles!");
while (!endGame)
try
Thread.sleep(2);
catch (Exception ex)
System.err.println("Error: " + ex);
try
myPlayer.animatePlayer();
myLevel.renderLevel();
catch (NullPointerException ex)
System.err.println("Game Update Error: " + ex);
try
repaint();
catch (Exception ex)
System.err.println("Repaint Error: " + ex);
s.restoreScreen();
// method to draw the tiles on the screen
public void paint(Graphics g)
// draw the level and then the player
myLevel.drawLevel(gr, 0, 0);
myPlayer.drawPlayer(gr, (SCREEN_WIDTH / 2) - TILE_SIZE / 2, (SCREEN_HEIGHT / 2) - TILE_SIZE);
g.drawImage(buffer, 0, 0, null);
// method to handle inputs and adjust the player accordingly
public void processKey(KeyEvent e)
int keyCode = e.getKeyCode();
boolean moved = false;
int xDisplace, yDisplace;
// termination key
if (keyCode == KeyEvent.VK_ESCAPE)
endGame = true;
// 1 - up
// 2 - left
// 3 - right
// 4 - down
// 5 - jump
if (keyCode == KeyEvent.VK_UP)
try
myPlayer.updatePlayer(0);
myLevel.updateLevel(0);
catch (Exception ex)
System.err.println("Error: " + ex);
if (keyCode == KeyEvent.VK_LEFT)
try
myPlayer.updatePlayer(1);
myLevel.updateLevel(1);
catch (Exception ex)
System.err.println("Error: " + ex);
if (keyCode == KeyEvent.VK_RIGHT)
try
myPlayer.updatePlayer(2);
myLevel.updateLevel(2);
catch (Exception ex)
System.err.println("Error: " + ex);
if (keyCode == KeyEvent.VK_DOWN)
try
myPlayer.updatePlayer(3);
myLevel.updateLevel(3);
catch (Exception ex)
System.err.println("Error: " + ex);
if (keyCode == KeyEvent.VK_SPACE)
try
myPlayer.updatePlayer(4);
myLevel.updateLevel(4);
catch (Exception ex)
System.err.println("Error: " + ex);
// method to handle inputs and adjust the player accordingly
public void processRelease(KeyEvent e)
int keyCode = e.getKeyCode();
boolean moved = false;
int xDisplace, yDisplace;
// 1 - up
// 2 - left
// 3 - right
// 4 - down
// 5 - jump
if (keyCode == KeyEvent.VK_UP)
try
myPlayer.updatePlayer(0);
catch (Exception ex)
System.err.println("Error: " + ex);
if (keyCode == KeyEvent.VK_LEFT)
try
myPlayer.updatePlayer(5);
catch (Exception ex)
System.err.println("Error: " + ex);
if (keyCode == KeyEvent.VK_RIGHT)
try
myPlayer.updatePlayer(6);
catch (Exception ex)
System.err.println("Error: " + ex);
if (keyCode == KeyEvent.VK_DOWN)
try
myPlayer.updatePlayer(3);
catch (Exception ex)
System.err.println("Error: " + ex);
if (keyCode == KeyEvent.VK_SPACE)
try
myPlayer.updatePlayer(4);
catch (Exception ex)
System.err.println("Error: " + ex);
}And then here's the other class that is calling the drawLevel method that the compiler is pointing me in the direction of (where it's saying the NullPointerException is stemming from):
/* The purpose of this class will be to load and manage a level, including its camera. */
import java.awt.image.*;
import java.io.*;
import javax.imageio.*;
import java.awt.*;
public class Level
// CONSTANTS
private final int TILE_SIZE = 14;
private final int SCREEN_WIDTH = 1280;
private final int SCREEN_HEIGHT = 768;
// END OF CONSTANTS
// stores the pixel image of the current level
private BufferedImage levelImage;
// stores the width and height of the level
private int width, height;
// stores the name of the level
private String levelName;
// stores collision map for level
private LevelCollisions myCollisions;
// stores the tile types in an array as assigned by colors
private int levelTiles[][];
// image used as the sheet for the level's tiles
private BufferedImage tileSheet;
// image array used to store the different tiles
private BufferedImage[] tiles;
// the image which represents the current view of the level
private BufferedImage cameraImage;
// Graphics context of the camera image
private Graphics cameraG;
// variables to represent the level's offset from the top left corner while moving
private int offsetX, offsetY;
// variables to represent the level's pixel map coordinate
private int coordX, coordY;
// STATIC COLOR VARIABLES
private static final int SPACE_COLOR = 0xFF000000;
private static final int WALL_COLOR = 0xFFFFFFFF;
// END OF STATIC COLOR VARIABLES
// CONSTRUCTOR
public Level(String level)
// load level image and collision map
levelName = level;
levelImage = loadImage(level + ".png");
myCollisions = new LevelCollisions(level + "Collision");
levelTiles = loadLevel();
// create blank camera canvas
cameraImage = new BufferedImage(1280, 768, BufferedImage.TYPE_INT_ARGB);
cameraImage.createGraphics();
cameraG = cameraImage.getGraphics();
// offsets start at 0
offsetX = offsetY = 0;
// coordinate starts at bottom right
coordX = 700;
coordY = 400;
// fill tile images
tileSheet = loadImage("obstacletiles.png");
tiles = splitImage(tileSheet, 1, 2);
this.renderLevel();
// method to load the color values into an array
public int[][] loadLevel()
height = levelImage.getHeight();
width = levelImage.getWidth();
int levelValues[][] = new int[width][height];
// fill array with color values layer by layer
for (int y = 0; y < height; y++)
for (int x = 0; x < width; x++)
levelValues[x][y] = levelImage.getRGB(x, y);
return levelValues;
// method to get the tile color from a given tile
public int getTile(int x, int y)
return levelTiles[x][y];
// method to draw the current camera view of the level on the screen
public void drawLevel(Graphics gr, int x, int y)
gr.drawImage(cameraImage, x, y, null);
// method to render the actual image before drawing it
public void renderLevel()
// keeps track of graphics coordinate
int x, y;
// keeps track of tile to draw
int tileX, tileY;
tileY = coordY;
// draw all the tiles based on offsets, layer by layer
for (y = offsetY; y < SCREEN_HEIGHT + offsetY; y += TILE_SIZE)
tileX = coordX;
for (x = offsetX; x < SCREEN_WIDTH + offsetX; x += TILE_SIZE)
// determine which tile to draw based on tile color in array
switch (this.getTile(tileX, tileY))
case SPACE_COLOR:
cameraG.drawImage(tiles[0], x, y, null);
break;
case WALL_COLOR:
cameraG.drawImage(tiles[1], x, y, null);
break;
tileX++;
// steps to take in case of an offset
if (offsetX > 0)
if (offsetX < 0)
if (offsetY < 0)
if (offsetY > 0)
// method to update the level's current position for the camera
public void updateLevel(int input)
switch (input)
// up
case 0:
break;
// left
case 1:
// update offset to the left if not too far left
if (coordX > 30)
offsetX--;
// if a tile has been moved, then offset becomes 0 and coordX is decreased
if (offsetX <= -TILE_SIZE)
offsetX = 0;
coordX--;
break;
// right
case 2:
// update offset to the right if not too far right
if (coordX < width - 30)
offsetX++;
// if a tile has been moved, then offset becomes 0 and coordX is increased
if (offsetX >= TILE_SIZE)
offsetX = 0;
coordX++;
break;
// down
case 3:
break;
// jump
case 4:
break;
// method to simply load an image from a path
public static BufferedImage loadImage(String ref)
BufferedImage bimg = null;
try
bimg = ImageIO.read(new File(ref));
catch (Exception e)
e.printStackTrace();
return bimg;
// method to create a tile array for tile sets
public static BufferedImage[] splitImage(BufferedImage img, int cols, int rows)
int w = img.getWidth() / cols;
int h = img.getHeight() / rows;
int num = 0;
BufferedImage imgs[] = new BufferedImage[w * h];
for (int y = 0; y < rows; y++)
for (int x = 0; x < cols; x++)
imgs[num] = new BufferedImage(w, h, img.getType());
Graphics2D g = imgs[num].createGraphics();
g.drawImage(img, 0, 0, w, h, w * x, h * y, w * x + w, h * y + h, null);
g.dispose();
num++;
return imgs;
// image-loading method that will also alpha the color key for each tile
public static BufferedImage makeColorTransparent(String ref, int color)
BufferedImage image = loadImage(ref);
BufferedImage dimg = new BufferedImage(image.getWidth(), image.getHeight(), BufferedImage.TYPE_INT_ARGB);
Graphics2D g = dimg.createGraphics();
g.setComposite(AlphaComposite.Src);
g.drawImage(image, null, 0, 0);
g.dispose();
for (int i = 0; i < dimg.getHeight(); i++)
for (int j = 0; j < dimg.getWidth(); j++)
if (dimg.getRGB(j, i) == color)
dimg.setRGB(j, i, 0x8F1C1C);
return dimg;
}Sorry for the long post, but since there are several objects involved in what could be the error, I didn't want to leave anything out of this one. Help is greatly appreciated! Thank you guys very much.
Colton
Edited by: coltonoscopy on Oct 2, 2011 11:57 PMException in thread "AWT-EventQueue-0" java.lang.NullPointerException
at LevelRenderer.paint(LevelRenderer.java:160)
// method to draw the tiles on the screen
public void paint(Graphics g)
// draw the level and then the player
myLevel.drawLevel(gr, 0, 0);
myPlayer.drawPlayer(gr, (SCREEN_WIDTH / 2) - TILE_SIZE / 2, (SCREEN_HEIGHT / 2) - TILE_SIZE);
g.drawImage(buffer, 0, 0, null);
}So one of those three lines is line 160, and whichever line it is, is dereferencing a null pointer. So one of 'myLevel', 'myPlayer', or 'g' is null. Probably not 'g' as you received it as a parameter from Swing. Pretty much cuts it down.
There's nothing here you couldn't have worked out for yourself. The line number was all you needed. -
Adding a new UDF throws a null pointer exception and modifying user.xml
Hello,
I have a two part question.
i. I am trying to add a UDF (using Advanced>User Configuration..Attributes) to a fully configured OIM i.e. oim with reconciliation and provisioning from and to resources but it throws a null pointer exception. Look at the log, I see
===============Excerpt form the log file==========
[2012-01-26T11:28:14.447-05:00] [oim_server1] [NOTIFICATION] [] [oracle.iam.platform.authz.impl] [tid: [ACTIVE].ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: xelsysadm] [ecid: 0000JKQq8vZ8dpC5nFk3yZ1Evvpt000LzY,0] [APP: oim#11.1.1.3.0] [dcid: c62f3a4b80d21e6f:ef93519:134587d39c4:-7ffd-0000000000022a3e] [[
---Stack Trace Begins[[This is not an exception. For debugging purposes]]---
oracle.iam.platform.authz.impl.OESAuthzServiceImpl.doCheckAccess(OESAuthzServiceImpl.java:210)
oracle.iam.platform.authz.impl.OESAuthzServiceImpl.hasAccess(OESAuthzServiceImpl.java:188)
oracle.iam.platform.authz.impl.OESAuthzServiceImpl.hasAccess(OESAuthzServiceImpl.java:180)
oracle.iam.platform.authz.impl.AuthorizationServiceImpl.hasAccess(AuthorizationServiceImpl.java:173)
oracle.iam.configservice.impl.ConfigManagerImpl.checkAuthorization(ConfigManagerImpl.java:1899)
oracle.iam.configservice.impl.ConfigManagerImpl.addAttribute(ConfigManagerImpl.java:177)
oracle.iam.configservice.api.ConfigManagerEJB.addAttributex(Unknown Source)
... 21 lines skipped..
oracle.iam.configservice.api.ConfigManager_5u0nrx_ConfigManagerRemoteImpl.addAttributex(ConfigManager_5u0nrx_ConfigManagerRemoteImpl.java:864)
... 13 lines skipped..
oracle.iam.configservice.api.ConfigManagerDelegate.addAttribute(Unknown Source)
oracle.iam.configservice.agentry.config.CreateAttributeActor.perform(CreateAttributeActor.java:266)
oracle.iam.consoles.faces.mvc.canonic.Model.perform(Model.java:547)
oracle.iam.consoles.faces.mvc.admin.Model.perform(Model.java:324)
oracle.iam.consoles.faces.mvc.canonic.Controller.doPerform(Controller.java:255)
oracle.iam.consoles.faces.mvc.canonic.Controller.doSelectAction(Controller.java:178)
oracle.iam.consoles.faces.event.NavigationListener.processAction(NavigationListener.java:97)
... 24 lines skipped..
oracle.iam.platform.auth.web.PwdMgmtNavigationFilter.doFilter(PwdMgmtNavigationFilter.java:115)
... weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
oracle.iam.platform.auth.web.OIMAuthContextFilter.doFilter(OIMAuthContextFilter.java:100)
... 15 lines skipped..
weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
---Stack Tracefor this call Ends---
[2012-01-26T11:28:14.447-05:00] [oim_server1] [NOTIFICATION] [IAM-1010010] [oracle.iam.platform.authz.impl] [tid: [ACTIVE].ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: xelsysadm] [ecid: 0000JKQq8vZ8dpC5nFk3yZ1Evvpt000LzY,0] [APP: oim#11.1.1.3.0] [dcid: c62f3a4b80d21e6f:ef93519:134587d39c4:-7ffd-0000000000022a3e] [arg: 1] [arg: null] [arg: USER_MANAGEMENT_CONFIG] [arg: CREATE_ATTRIBUTE] ********** Entering the Authorization Segment with parameters:: LoggedInUserId = 1, target resourceID = null, Feature = USER_MANAGEMENT_CONFIG, Action = CREATE_ATTRIBUTE **********
[2012-01-26T11:28:14.448-05:00] [oim_server1] [NOTIFICATION] [IAM-1010021] [oracle.iam.platform.authz.impl] [tid: [ACTIVE].ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: xelsysadm] [ecid: 0000JKQq8vZ8dpC5nFk3yZ1Evvpt000LzY,0] [APP: oim#11.1.1.3.0] [dcid: c62f3a4b80d21e6f:ef93519:134587d39c4:-7ffd-0000000000022a3e] [arg: [InternalObligation: name: noop, values: [true], convertToObligation: false, InternalObligation: name: noop, values: [true], convertToObligation: false]] Validating the Internal Obligations: [InternalObligation: name: noop, values: [true], convertToObligation: false, InternalObligation: name: noop, values: [true], convertToObligation: false]
[2012-01-26T11:28:14.448-05:00] [oim_server1] [NOTIFICATION] [IAM-1010022] [oracle.iam.platform.authz.impl] [tid: [ACTIVE].ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: xelsysadm] [ecid: 0000JKQq8vZ8dpC5nFk3yZ1Evvpt000LzY,0] [APP: oim#11.1.1.3.0] [dcid: c62f3a4b80d21e6f:ef93519:134587d39c4:-7ffd-0000000000022a3e] ---------- The list of Internal Obligation is satisfied, returning TRUE ----------
[2012-01-26T11:28:14.448-05:00] [oim_server1] [NOTIFICATION] [IAM-1010026] [oracle.iam.platform.authz.impl] [tid: [ACTIVE].ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: xelsysadm] [ecid: 0000JKQq8vZ8dpC5nFk3yZ1Evvpt000LzY,0] [APP: oim#11.1.1.3.0] [dcid: c62f3a4b80d21e6f:ef93519:134587d39c4:-7ffd-0000000000022a3e] [arg: Decision :PERMIT\nObligations from policy: ] ********** Exiting the Authorization Segment with result Decision :PERMIT[[
=============Excerpt ends==============
Is there a reason why this is and how do I get by it.
ii. Can I just add the field directly within the MDS>file/user.xml? Would there be an issue with changing an existing attribute metadata using the user.xml?Pradeep thank you for your response. it was helpful. However, I also found the responses to both my questions.
i. The null pointer exception was due to using a complex query I was using in the LOV query. I tried a simple query and that worked fine.
ii. For modifying the user defined attributes one can consult the following forum post:
OIM 11g - Change UDF Field Type form String to LOV
Thanks
Maybe you are looking for
-
This is more of a hypothetical question. I ask because I am curious. My Mid-2010 Mac Mini worked cheerfully on 2GB of RAM until I got to Yosemite. Since then the computer has been getting slower and slower. When my HP LaserJet P1102w refused to pr
-
How can I use the same Apple ID account in two different App Stores?
I am from Greece and I use my Apple-ID account to download iPhone Apps from the Greek App Store. However I live in Germany and some iPhone applications I want are available only through the German App Store. When I try to download one of them I got t
-
Filter warning and ascii save error
Hello, I am performing modal analysis using a impact hammer, USB NI 9233 cRIO DAQ and Sound and Vibration assistant. The steps have been set in Signal express as DAQ Acquire =>Trigger=>Filter=> Power spectrum => FRF => Save to Ascii. I am f
-
Connect to Oracle 8i from Forms 6
I have installed Personal Oracle 8i and developper 6 in a NT. I got the error when tried to connect to the Oracle 8i from Form Builder. "could not resolve service name". I did enter the database name. Any ideas?
-
Hi. I've a problem with ADF faces that I didn't had when I was using the JSF reference implementation. W're using Jboss as a container, but that has nothing to do with this. Basicly, the users triggers a logoff by clicking a link that leads to the "l