Bug with probe window?

I was doing some debugging in LV 2012 (not SP1) and discovered this. I have been able to duplicate it in 2011. LV 2009 and LV 2010 do not show this problem.
1. Run the attached VI (saved as LV2009 so you can try in different versions.)
2. Place a probe on either the timestamp wire or the iteration terminal wire. You will see the values update.
3. Right click on the data on the probe window and pick Open Window. This creates a separate window and shows the data updating.
4. Move the newly opened probe window. Now the separate probe window stops updating. The value in the master probe window stops updating. Also the bubble on the wire that shows the probe number disappears. The front panel continues to update like it should.
In LV 2009 and 2010, the probe windows continue to update In LV 2011 and 2012, they do not.
I searched the forums and could not find anyone mentioning a probe bug like this. Please verify the behavior and issue a CAR# if you agree it is a bug.
Attachments:
ProbeProblem.vi ‏7 KB

Working fine for me in both 2012f3 and 2011 SP1. Windows 7 64-bit.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Similar Messages

CS 5.5 workspace bug with Properties Window

I just upgraded to Dreamweaver CS5.5 and I'm attempting to make my own custom workspace like I have for every version beforehand.
When I save my workspace and then restart Dreamweaver, the Properties Window jumps up to approximately halfway up the screen instead of at the bottom as I placed it. I've tried resaving the workspace, etc. and trying different positions of the Properties Window, but it continues to ignore this and jump it back up towards the middle of my display (nice and in the way of actual webpage windows I open/edit).
I'm forced to move the Properties Window to the bottom of my screen each and every time I launch Dreamweaver CS5.5.

Sorry for forgetting the details.
• What platform and OS are you working on? Mac OS 10.6.7 with dual monitors
• Is the left-hand monitor your secondary one? Yes

Export in QuickTime - bug with QuickTime Windows but not with Mac!

Hello everyone and thanks for reading and answering...
Something super weird is happening to me...
I'm exporting a keynote file to Quicktime. The presentation contains movies saved in quicktime format (.mov)
When I play the exported quicktime file on my Mac, everything runs smoothly.
However, when I play the same file on my Windows computer, Quicktime freezes as soon as the presentation comes to the video (it freezes when it's time to play it). WHY?
I was wondering if the problem was coming from the fact that on my Mac i have Quicktime Pro, but on my Windows CPU I just have the regular version. I was thinking that it may be a codec thing.
Does anyone know? (I don't wanna buy QT Pro only to realize that it wasn't the problem, especially that I seldom use my windows computer (it's a laptop, so I only use it when I have a presentation)
Thanks a LOT for your inputs and have a good time...

OK, I may have found the source of the problem: when i tried to play the movie file that I had inserted in Keynote on my PC, Quicktime asked for a codec. In Movie Inspector, I saw that the video was encoded in FLV1...
Any idea where I can get this codec for QT WIndows (I'm searching for it and haven't found it yet)

Okay, i have 2 bugs with maverick. First, when I delete a file within a window, the files deletes but the preview doesn't delete until I close the window and reopen it. Second, I work on a network of computers and the search feature is now buggy...

Okay, i have 2 bugs with maverick. First, when I delete a file within a window, the files deletes but the preview doesn't delete until I close the window and reopen it. Second, I work on a network of computers and the search feature is now buggy... When I search for a file, A) it asks me if it's a name, or it wont produce anything, and B), its slower than in prior OS versions and in some instances I have to toggle to a different directory and go back to my original directory in the search: menu bar or the search wont produce anything... Very buggy.

It appears to me that network file access is buggy in Maverick.
In my case I have a USB Drive attached to airport extreme (new model) and when I open folders on that drive they all appear empty. If I right click and I select get info after a few minutes! I get a list of the content.
It makes impossible navigate a directory tree.
File access has been trashed in Maverick.
They have improved (read broken) Finder. I need to manage a way to downgrade to Lion again.

Am i the only one that see's serious bugs with Windows Search index on Windows 8.1 and Office 2013?

So i originally had Windows 8 and Office 2013 installed. I noticed that alot of my emails in Outlook 2013 as well as contacts werent being indexed. I waited for windows 8.1 and did an upgrade hoping the 8.1 would fix the issue. It didn't.
So i formatted my hard drive, installed fresh windows 8.1, and office 2013, and let it Windows Index run. I see 2 things happening.
A.) The indexer never completes
B.) the indexer takes up 40% cpu usage.
I tried rebuilding, creating index from new location, nothing seemed to work. I decided to prevent the indexer from searching Office apps (outlook and onenote) and low and behold it completes indexing.
I decided to try and format again and see if there was some bug causing the issue. So this week I formatted once agian, loaded Windows 8.1, installed updates, and loaded office 2013. Once again, my indexer
is stuck around 70k items and my processor usage on Searchindexer.exe is around 30-40%.
Is this a known bug with 8.1 and office?
Brad Nelson MCSE/DCSE/A+/Network+/WCSP

Hi,
I test in my environment, and Windows would finish the index, the CPU usage keeps in 29%, which my RAM is 8G.
Can you tell us how you let the Windows Index run?
Alex Zhao
TechNet Community Support

Apex 4.2 with WP7 ( Windows Phone 7 ) Bug ?

Hi,
since my upgrade to APEX 4.2 ( comming from 4.1.1.) I am unable to login any application with my windows phone 7/internet explorer.
I'm also unable to login any development workspace from the same phone. On a desktop I don't have these problems.
It's hard to debug but it looks like pages don't get submitted, after pressing a button nothing happens.
In the end login in is not my biggest problem but I need to be able to submit pages from a browser on a phone (any phone/os if possible).
Anybody had similar experience and/or a solution ?
Hope you can help me out since this is important functionality in some of my applications :(
Just checked : The problem also occurs on other browsers on the same device ( installed Safari as a test ). With IE the device identifies itself as :
Mozilla/5.0(Compatible; MSIE 9.0; Windows Phone OS 7.5; Trident/5.0;IEMobile/9.0; Nokia Lumia 800)
Regards
Bas
p.s. I did not create any extra (mobile) user interfaces in these applications, they should behave the same on a phone as a desktop so I'm just using the desktop interface.
Edited by: Bas de Klerk on Oct 21, 2012 6:32 AM

Bas,
I have been able to reproduce this using the emulator included in version 7.1 of the SDK and have filed bug #15858237 to track this. I have also been able to narrow this down to some specific code in the apex.submit function, which was added in 4.2 to address a separate bug relating to browser autocomplete support for IE. I have no easy workaround for you currently, but will update the thread with any further progress and also have this added to our [url http://www.oracle.com/technetwork/developer-tools/apex/application-express/apex-42-known-issues-1863578.html]Known Issues page.
In one of your posts, you mentioned that you were able to workaround this by "manually program the submit code via a dynamic action on the button executing PL/SQL which does the submitcode(insert/update or what else is needed) and after that redirect to the wanted page". Can you expand on exactly what you did here?
Sorry you have hit this and thank you for taking the time to report it here.
Regards,
Anthony.

File sharing bug with windows in mountain lion

File Sharing Bug with Windows
Hi,
there are some windows in our firm and we're sharing the files using File Sharing. The problem is that the windowses can see the files not only the ones in public folder, but also whole disk, like Desktop, Library etc. When i installed Lion, it was happened again for one time. But then it fixed in a way which i don't know. After Mountain Lion, this problem occurs again.
So, why can it be happened and how do i fix it? please help me.
thank you.
tanyildiz

not any guess?

Mathscript Probe Window (LV 2009) Not listing all variables

Please see the screenshot below. The Mathscript probe window is shown on the right of the VI block diagram. The execution is at the breakpoint on the last line (blue arrow).
Why is input variable "a" not listed in the probe window? I see this behavior that some variables are not listed in the probe window.
Thanks,
AJ

Hi AJ,
There are a couple of things that may be going on when variables fail to appear in the MathScript Probe. The first is a bug with the MathScript Probe in 2009. Sometimes input variables either fail to appear or briefly appear then immediately disappear. The good news is that this bug (CAR #182784) is scheduled to be fixed in the next service pack release of LabVIEW. I'm not sure if Nickerbocker's workaround will work. If it doesn't, you could also try adding "a = a+0;" to the top of your script.
Another occasion where variables will fail to appear is if they are defined within your script but never used. This case is analagous to placing a constant on a LabVIEW block diagram and not wiring it to anything. In this situation, there is no wire to probe; the only way to see the value at run-time is to look at the code itself. It's a similar situation when you define a variable in MathScript without using it; the MathScript Probe cannot report the variable because it doesn't have a corresponding "wire" so you have to look at your MathScript node to see the value.
Please let us know if you notice missing variables in situations other than the above two cases.
Thanks,
jattas
LabVIEW MathScript R&D

Cisco wlc ios 7.2 with clients windows 8 can not authenticate with 802.1x

Hello my name is Ivan:
I have a solution a unified solution wireless with a cisco wlc 7.2 and ap cisco. My issue is the follow:
My users are using laptops with OS windows 8, and they can not access to the network wireless because they authenticate in to the network using 802.1x wpa/wpa2 with tkip or aes.
I find a bug in the ios of the wlc. The number is CSCua29504. I would not to change the drivers in the laptop to join the users in to the solution.
Please is possible to find any software to do the upgrade in the wlc? Or perhaps we need to do an upgrade in to cisco lightweight access point?
Please help me in this issue.
Regards
Ivan

Bug ID CSCua29504 has been fixed in WLC firmware 7.0.235.3, 7.3.101.X or 7.4.100.X.
So if you are NOT running any one of these codes, then yes. Upgrade your firmware is your solution.
Fixed in: (12)
7.4(100.0),7.4(1.20),7.3(112.0),7.3(101.0),7.3(1.67)
7.2(111.3),7.2(111.1),7.2(110.4),7.0(236.0),7.0(235.3)

Blocking bug with 10.8.3+Adobe Lightroom+Canon iPF5000 (but workaround found)

Hi all,
since I have updated my MacBook Pro (early 2011 model) with 10.8.3, I have a blocking bug with Adobe Lightroom (either 4.3 or 4.4) for launching prints on my Canon iPF5000 (firmware 1.33, either MacOS driver 2.67 or 3.06, connection through USB).
When I was under 10.8.2 with the Canon's driver 3.06, everything works fine.
Basically, after clicking Print a Copy or Print... in Lightroom, the file spooled to the driver stays in MacOS printer queue. Within the printer queue window, the printer is in pause mode, and each time I try to resume the printing processing, the driver put it on hold immediately. When I look into the history on the Console, the driver complains about an unknown error... The data stay within the driver, as my Canon iPF5000 "Data" led indicator stays unlit.
My print settings are 600dpi or 300dpi, print sharpening Standard/Glossy, 16 bit output. And Color managed by printer (because I let the Canon driver managing my B&W prints).
Strangely enough, when I launch a print from Preview application, the drivers does its job and sends it successfully to my Canon iPF5000...
As this was driving me crazy, I have tried a clean install of MacOS 10.8.3 (as 10.8.2 is no more available from Apple servers...). No success, same blocking issue.
Eventually, I've found the workaround: using the imagePROGRAF Advanced Preview. You have to click on "Print..." in Lightroom in order to see the driver settings window, and then check the "Preview before printing" option in the main tab of the driver settings. Then I can preview my Lightroom printing work and then launch successfully my printing.
Simple workaround, but very strange bug...
For me, the root cause could be multiple and not very obvious.
Is it Mac OS 10.8.3 ? But why can I make prints from Preview application for instance, and not from LR ?
Is it the Canon driver ? But this lead me to the same question.
Is it Lightroom ? Does it send corrupted data that make the driver crazy but not the imagePROGRAF Advanced Preview ?
So, if any user of Canon iPF5000 + Mac OS 10.8 + Lightroom is around, please share your experience.
And if any Apple, Adobe or Canon engineer read this, please try to fix this.
Happy printing,
Amaury

It's different how applications write print data. If you use Advanced Preview from the driver then it calculates already the output which afterwards is only sent to the printer.
Have you once tried to print with fast graphic process switched off (option of advanced settings)?
Hope it helps
Renate

BUG with Memory CAS-Latency with MSI i848P Neo-LS BIOS

I have a bug with MSI i848P Neo-LS BIOS. I try many MSI i848P with same trouble : the CAS Latency is always set to 2.0 even if the memory is CAS Latency 2.5.
It doesn't depend on PSU or others things (graphics card,...).
Try with Pentium 4C 2.6 or 2.8
But I have just one brand of memory (but many different sticks). Chips reference are VT56DD32M8PC-5 (256 or 512 Mb). This memory are reference as Cas Latency 2.5
If I set memory timings on SPD or manual : same result !!!
If I set memory speed on AUTO or 400 MHz : same result !!!
If I set other timings, then they are save correctly (ie : RAS# precharge set to 3 or 4).
I check timings with latest version of Memtest86+ V1.0 : http://www.memtest.org/
and of course, I get many errors.
The same memory tested on others mobo, give good results.
I try Windows XP installation and I get.... blue screens.
With some memory sticks : I have this message "memory timing too tighly",
if I press F1 to continue: then I get a memory cas latency of 2.5 with memtest86+ and then no error.
I try BIOS revision 1.0 (default) and 1.2: same result !!!
So, as I said before, I think this is a bug with the BIOS. I agree that a BIOS cannot detect correctly all kind of memory, but if you set memory timings manualy, then it must be set as you want ! ?
Any idea...
Thanks

H0 Alex,
You are correct.I have the same problem with my 875p neo lsr on bios 1.9. TH0S 0S B0OS BUG.but everyone says your psu is not enough or your rams isnt on the MSI Memory Compatability List.
why all of rams I try give same result?
MS0 boards works only with 10 or 20 ram.you don't say customer why you use this rams?
why in asus boards many os these rams working properly.This rams isnt on the MSI Memory Compatability List.but working.I try many no name rams and results are very good in all of the tests.
In my opinion MS0 bioses doesnt work good enough.
You don't drive a car.Car Drives you.

Bug in moving windows?

Has anyone else noticed a problem with moving windows around by dragging them from the title bar:
It used to be possible to move them off screen right, left, and down. Movement off the screen to the top was prevented, however: The pointer remaining at the edge of the screen, and the window moving no higher than the system menu bar.
Now there seems to be a bug: This upwards movement restriction seems to switch on and off randomly - sometimes, the window is kept on screen as it should be, but a second later, it can be dragged off screen towards the top.
I've had a look and can't find a mention of this anywhere. I vaguely remember there was a preferences option "Keep windows on screen" or something along those lines, but can't find it anywhere.
I'm running 10.8.5 completely up to date.

Support for moving automation is pretty much horrible all around.
If you select all in the arrange window with automation visible, it only selects regions... so if you select all and move stuff, automation not associated with a region will stay put. Selecting automation on its own is difficult because you can barely see what's selected, and using the automation selection tool can select across multiple tracks but not move automation for multiple tracks at once.
Also, adjusting the song start will keep regions in the same place in relation to bar 0, but will move automation... or something.
It makes puppies cry.

Bizarre Slowdown Unless Probe Window has Focus

I'm having a strange problem when reading data from a file into memory using LabVIEW's "Read from SGL file" VI and a bunch of array operations (Initialise, Replace Subset). The read operation is run many thousands of times, as it resides inside two nested For Loops.
Without any outside intervention, the process takes quite a while to complete (a few minutes), although when all the data's been read it doesn't take up that much memory. However, while I had some probe windows open on a completely different part of the program, I noticed that the speed became inexplicably much faster while the probe window was being moved. In fact, it happens when I click and hold the mouse button on the border of the probe window, I don't have to move it at all. The probe window doesn't have to be probing a point in a currently running SubVI.
Left to its own devices, the process takes about 10 minutes, during which time it uses about 3% of the processor time. With a probe window focussed, it completes the process in about 20 seconds and uses about 50% CPU. Fiddling with the process priority for LabVIEW.exe seems to have no effect.
LabVIEW 7.1, WinXP SP1 running on a 3GHz Hyperthreading P4 with 512MB RAM.
Any ideas?

Hello Ian,
This is definitely strange. Would it be possible to post your code on the forum, (and the file your reading from if its not too big or sensitive information), then we'll take a look at it and see if we can reproduce this behaviour.
If you dont want to post the code on the forum, then we'll arrange a different method.
Regards
Hannah
NIUK& Ireland

E71 Firmware Bug with USB Mass Storage.

Hi,
Just got a e71, it has the latest firmware, it's mostly good except for this bug.
If you install a new theme on a memory card and then attempt to use the USB for mass storage it will always lock the card no matter how you disconnect from the USB, it always reports Memory card in use.
What is supposed to happen is the phone is supposed to switch to a theme on the phone memory and unload the theme on the card, it does indeed switch themes, but does not unload the theme on the card, so the only way to free the card is to reboot the phone.
If anyone from Nokia is looking at this forum, you guys need to fix these little bugs with the firmware. A update to the OS the E71x is using would be nice by the way. I paid a lot of money for this unlocked phone and expect it to be rock solid.

I had this problem with the memory card. All you do is set the USB connection to PC suit and not Mass Storage. If it's in PC suit mode you don't loose the memory card and it always let you access it. I never bother with mass storage anymore. Also set to don't ask if you want. I ahve no issues since I di this and am using the 200 firmware.
To transfer files to the card I go into my computer, double click the picture of the nokia E71 and then double click the memory card and access it that way. Hope this helps as it's a pain installing everything on the phone.
Just another quick tip if you download the themes through your phone like me once installed and after a re-start something may try and install and fail once your phone starts up. It will do this everytime you re-start your phone. To fix the issue you have to browse the memory card with 'view hidden folders' selected in Windows and delete certain sis files from a certain folder. I can't remember off the top of my head but it explains it in another post in this forum. I can't take the credit for it.
Ben

A Bug with the new ms-6729 Bios (6729v5.30)

Hi
After updating my Bios to the new version, the motherboard detect my CPU(Athlon 2400+) as a 1800+.
I tried to change settings manually without success.
Anybody has encountred a similar problem?
Best Regards

Dir Sir,
Thank you very much for your quick answer, but i believe you didn't try
the mentioned Bios.
I'm not a novice, i mounted more than 300 computers for my clients, and
around 30 of last 50 computers are with MSI Motherboards.
Cpu Fsb for Athlon 2400+ is 133 but the ddr/fsb is 4:5 because i'm using
DDR 333 and the K7N2-V (MS-6729) is DDR 400 ready.
With all MSI motherboards i mounted, it’s enough to put the correct CPU
FSB and (Auto) to detect everything by the SPD.
Certainly it's a BUG with the new version because the Bios and Windows
detect CPU as Athlon 1800+ (1500) instead of 2400+ (20000.
Best Regards,
Lostan

Bug with probe window?

Similar Messages

Maybe you are looking for