Bug with TURKISH local

hi ,
I have dowloaded odp.net and I was looking at samples , but there are some problems guys.These are :
my connection string in sample is
string constr = "User id=scott;Password=TIGER;Data Source=honest";
"User Id=" doesn't work gives error , but "User id=" works
and also
"password=tiger" doesn't work , but "password=TIGER" works.
I think there is some problems with "I" character because in turkish language i and I are different letters.

What is the error message and the call stack of the exception?

Similar Messages

JVM bug with Turkish locale settings (windows)

Hello,
There is a serious bug in all versions of java virtual machine. When you set your locale settings to Turkish language, you can not install & use database driven java applications (that needs to create a database). For example; you can't install oracle 9i or 10g, ORA-12560 arises in database creation phase; and you can't install Readerware (a book cataloger), it locks-up in database creation phase, too. Ofcourse when you change your language to English or another language the problem goes away.
I found that the source of the problem is JVM's wrong character mapping. It fails to convert Turkish and English "i" and "I" characters correctly (they're different in Turkish).
Is there anybody to fix this issue in the next release ?
Thanks,...

I logged a bug about Java's Turkish Collator implementation: http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=4688797.
I'm not sure if your issue would fall into the same category. It looks like a separate bug to me, although closely related.
Try logging that bug, or adding this to the bug above.
HTH,
<rsa/>

Eclipse & Totem Doesn't Work Because of Turkish Locale

Hey There,
Eclipse doesn't work with Turkish locale. I run it from the console with tr_TR.UTF-8 locale but it closes without printing any errors. If I change my locale to C, then it starts working.
Totem also doesn't work with these errors when using the above locale:
Gtk-ERROR **: Invalid type: GtkImage
aborting...
2b858994-b6a9-e4e3-17e731bd-7eaa1ab5 is dumped
Gtk-ERROR **: Invalid type: GtkImage
aborting...
2b858994-b6a9-e4e3-17e731bd-7eaa1ab5 is dumped
Gtk-ERROR **: Invalid type: GtkImage
aborting...
2b858994-b6a9-e4e3-17e731bd-7eaa1ab5 is dumped
Gtk-ERROR **: Invalid type: GtkImage
aborting...
5f81d5b9-5751-eb66-4e618d3e-1a2e6fc6 is dumped
Maximum number of clients reachedcannot open display:
Mevcut olan komut satırı seçeneklerinin tam listesini görmek istiyor sanız 'bug-buddy' --help'i çalıştırın.
If I change my locale to C, it works without any problems. These kinds of problems are really annoying and prevents the usability on Linux

Hey Jontheruler,
Try the tips in this article: http://docs.info.apple.com/article.html?artnum=304424 , they should get rid of that error message.
Jason

Optimization bug with C++ inlining

Hi,
While evaluating Sun Studio 11 I have identified an optimization bug with C++ inlining.
The bug can easily be reproduced with the small program below. The program produces
wrong results with -xO2, because an inline access function always returns the value 0.0
instead of the value given on the commandline:
djerba{ru}16 : CC -o polybug polybug.cc
djerba{ru}17 : ./polybug 1.0
coeff(0): 1.000000
djerba{ru}18 : CC -o polybug -xO2 polybug.cc
djerba{ru}19 : ./polybug 1.0
coeff(0): 0.000000            <<<<<<<<<< wrong, should be 1.000000This occurs only with optimization level O2; levels below or above O2 don't
exhibit the bug.
Compiler version is
Sun C++ 5.8 Patch 121017-01 2005/12/11
on Solaris 8 / Sparc.
I include a preliminary analysis at the end.
Best Regards
Dieter R.
-------------------- polybug.cc -------------------------
// note: this may look strange, but this is a heavily stripped down
// version of actual working application code...
#include <stdio.h>
#include <stdlib.h>
class Poly {
public:
    // constructor initializes number of valid coefficients to zero:
    Poly() { numvalid = 0; };
    ~Poly() {};
    // returns coefficient with index j, if valid. Otherwise returns 0.0:
    double coeff(int j) {
     if (j < numvalid) {
         return coefficients[j];
     } else {
         return 0.0;
   // copies contents of this Object to other Poly:
    void getPoly(Poly& q) { q = *this; };
    // data members:
    // valid coefficients: 0 ... (numvalid - 1)
    double coefficients[6];
    int numvalid;
void troublefunc(Poly* pC) {
    // copies Poly-Object to local Poly, extracts coefficient
    // with index 0 and prints it. Should be the value given
    // on commandline.
    // Poly constructor, getPoly and coeff are all inline!
    if (pC) {
     Poly pol;
     pC->getPoly(pol);
     printf("coeff(0): %f\n",pol.coeff(0));
int main(int argc,char* argv[]) {
    double d = atof(argv[1]);
    // creates Poly object and fills coefficient with index
    // 0 with the value given on commandline
    Poly* pC = new Poly;
    pC->coefficients[0] = d;
    pC->numvalid = 1;
    troublefunc(pC);
    return 0;
The disassembly fragment below shows that the access function coeff(0), instead
of retrieving coefficient[0] simply returns the fixed value 0.0 (presumably because the
optimizer "thinks" numvalid holds still the value 0 from the constructor and that therefore
the comparison "if (i < numvalid)" can be omitted).
Note: disassembly created from code compiled with -features=no%except for simplicity!
00010e68 <___const_seg_900000102>:
        ...     holds the value 0.0
00010e80 <__1cLtroublefunc6FpnEPoly__v_>:
   10e80:       90 90 00 08     orcc %g0, %o0, %o0      if (pC) {
   10e84:       02 40 00 14     be,pn   %icc, 10ed4
   10e88:       9c 03 bf 50     add %sp, -176, %sp
                                                   local Poly object at %sp + 120
                                                         numvalid at %sp + 0xa8 (168)
   10e8c:       c0 23 a0 a8     clr [ %sp + 0xa8 ]      Poly() { numvalid = 0; };
                                                         pC->getPoly(pol):
                                                         loop copies *pC to local Poly object
   10e90:       9a 03 a0 80     add %sp, 0x80, %o5
   10e94:       96 10 20 30     mov 0x30, %o3
   10e98:       d8 5a 00 0b     ldx [ %o0 + %o3 ], %o4
   10e9c:       96 a2 e0 08     subcc %o3, 8, %o3
   10ea0:       16 4f ff fe     bge %icc, 10e98
   10ea4:       d8 73 40 0b     stx %o4, [ %o5 + %o3 ]
                                                         pol.coeff(0):
                                                         load double value 0.0 at
                                                         ___const_seg_900000102 in %f0
                                                         (and address of format string in %o0)
   10ea8:       1b 00 00 43     sethi %hi(0x10c00), %o5
   10eac:       15 00 00 44     sethi %hi(0x11000), %o2
   10eb0:       c1 1b 62 68     ldd [ %o5 + 0x268 ], %f0
   10eb4:       90 02 a0 ac     add %o2, 0xac, %o0
   10eb8:       82 10 00 0f     mov %o7, %g1
                                                         store 0.0 in %f0 to stack and load it
                                                         from there to %o1/%o2
   10ebc:       c1 3b a0 60     std %f0, [ %sp + 0x60 ]
   10ec0:       d2 03 a0 60     ld [ %sp + 0x60 ], %o1
   10ec4:       d4 03 a0 64     ld [ %sp + 0x64 ], %o2
   10ec8:       9c 03 a0 b0     add %sp, 0xb0, %sp
                                                         call printf
   10ecc:       40 00 40 92     call 21114 <_PROCEDURE_LINKAGE_TABLE_+0x54>
   10ed0:       9e 10 00 01     mov %g1, %o7
   10ed4:       81 c3 e0 08     retl
   10ed8:       9c 03 a0 b0     add %sp, 0xb0, %sp
Hmmm... This seems to stress this formatting tags thing to its limits...

Thanks for confirming this.
No, this happens neither in an Open Source package nor in an important product. This is an internal product, which is continuously developed with Sun Tools since 1992 (with incidents like this one being very rare).
I am a bit concerned with this bug though, because it might indicate a weakness in the area of C++ inlining (after all, the compiler fails to correctly aggregate a sequence of three fairly simple inline functions, something which is quite common in our application). If, on the other hand, this is a singular failure caused by unique circumstances which we have hit by sheer (un)luck, it is always possible to work around this: explicitly defining a assignment operator instead of relying on the compiler-generated one is sufficient to make the bug go away.

Setup.exe gives a "LANG_LIST has some locales which does not match with the locale of serial number"

I ran the Adobe Customization Wizard XI to create a transform file and now when run setup.exe it always come with the error "LANG_LIST has some locales which does not match with the locale of serial number".
It does the same thing when using msi with the command : msiexec /i AcroPro.msi TRANSFORMS=AcroPro.mst /qb!
Here is my setup.ini file
[Startup]
RequireOS=Windows XP
RequireMSI=3.1
RequireIE=7.0.0000.0
Require64BitVC10RT=1
CmdLine=/spb /rs /sl"1036"
[Product]
msi=AcroPro.msi
vcrtMsi=vc_red.msi
vcrtDir=VC10RT_x64
Languages=1033;1036
2052=Chinese Simplified
1028=Chinese Traditional
1029=Czech
1030=Danish
1043=Dutch (Netherlands)
1033=English (United States)
1035=Finnish
1036=French (France)
1031=German (Germany)
1038=Hungarian
1040=Italian (Italy)
1041=Japanese
1042=Korean
1044=Norwegian (Bokmal)
1045=Polish
1046=Portuguese (Brazil)
1049=Russian
1051=Slovak
1060=Slovenian
1034=Spanish (Traditional Sort)
1053=Swedish
1055=Turkish
1058=Ukrainian
1025=English with Arabic support
1037=English with Hebrew support
6156=French (Morocco)
CmdLine=TRANSFORMS="AcroPro.mst"
[Windows XP]
PlatformID=2
MajorVersion=5
MinorVersion=1
ServicePackMajor=3
[MSI Updater]
Path=WindowsInstaller-KB893803-v2-x86.exe
I don't know what goes wrong as took my serial number on my profile from the adobe web site, same thing for the download of the software.
Does it means that the serial number provided was invalid for deploying ?
NB.: My goal is to deploy our Acrobat XI through SCCM in silent mode and I don't know if there is extra consideration for that. For now it's only not working at the command line.
Another important point is that the install works great without customization ! If I just run the setup.exe from freshly extracted files and I use my serial number, everything is working fine.
So what goes wrong ?

Thanks for the reply brogers_1 and Vinod Dbhal, you gave good hint.
I retried installing the initial package in French on a Windows 7 English and the software installed properly in French.
As I used to work with virtuals for those tests, I rolled back my virtual and redo my test installation with chosing to install it in English on my Windows 7 English and again the installation finished properly but I was surprised when I realized that even if I chose English as language, the software was running in French !
Of course I can change the language settings (in the edit-preferences-language) to follow the operating system witch is nice.
That gave me the cue I needed to know. I started from scratch my customization with choosing only the French language in the "Application Languages" and I left the MUI Languages blank and saved the .mst
I ran again the same command : msiexec /i AcroPro.msi TRANSFORMS=AcroPro.mst /qb!
And everything works fine.
NB.: As I used the .msi directly, of course I had to install the prerequirement Visual C++ 2010 first. Otherwise the installation failed without any error message.
Thanks again to you for your good hint,
Bob

Terrible bug with Rescue & Recovery 4.5

Hello all,
Just a notice to all users, I had a terrible bug with Lenovo Rescue & Recovery. Everything went well, until the restore: I have one SSD for system and one micro sata for data. The system drive had two partitions (created by Lenovo at the origin, a system (C) partition and a Lenovo recovery partition). When I tried to restore a previous version of the system drive that I backuped with Lenovo R&R, it restored the system on C: and restored the recovery partition... on D:, erasing all my data! In addition, the MBR was missing on the system. And cherry on the cake, I could not use the backup a second time when I tried, because R&R did not find the backup again.
I was particularly disappointed because as the backup went so smoothly, I did not do a data backup before restore, my previous backup being three days old, so I lost three days of work.
I had previous bad experience with Windows backup & restore, windows software could not find the restore, but at least it did not erase data.
Thierry

I agree with the TERRIBLE bug comment.
It amounts to:
(1) restore Q partition
(2) C drive.
I will repeat my other posts. I ordered pc, with 320 GB and 160 Gb Hdd. From factory, C went to 320MB. Factory install goes to 1st HDD it finds, in my case 320 GB.
So you have discovered a new, how does it work?
1 HDD (c), 1 sata (for data). It used factory recovery items, and waxed the sata( and made it bootable). Then got smarter, and restored C to HDD, unbootable.
Did someone not test this? Dont expect a new version of RNR. not supported on win 8. Acronis, $$ well spent.
Dumb.
Next time, unplug the loved sata before a FULL HDD restore. (not a c drive restore). Sad. unplug loved!
==
Did not find backup 2nd time around. Discussed in other posts from myself. What is your windows platform RNR backup location set to? If local, change it to USB or where ever you think they are at.

30EA3: German language bug with user defined reports still not fixed

In 30EA2: Limited folder functionality with German language
I wrote about a bug in 30EA2. Was this message noticed by the developers?
The bug still exists in 30EA3.
In new folders for user definded reports only the options "Kopieren" and "Exportieren" (copy and export) are available, when SQL-Deverloper runs in German language mode.
A workaround is to force language to English with the line
AddVMOption -Duser.language=en
in sqldeveloper.conf

I made a new thread for the same bug in 3.1EA2:
3.1EA2 Old bug with German language settings still exists
I have some hope, that my problem finally got noticed by the developers.

3.1EA2 Old bug with German language settings still exists

In the past I wrote several times about a bug in SQL Developer when running in German language mode. This bug is still not fixed in 3.1 EA2:
In new folders for user definded reports only the options "Kopieren" and "Speichern unter ..." ('Copy' and 'Cave as') are available, when SQL-Deverloper runs in German language mode. Other options like "Bearbeiten, Neuer Ordner, Neuer Bericht, Ausschneiden, Einfügen, Löschen" (Edit, New Folder, New Report, Cut, Paste, Delete) are missing. A workaround is to force language to English with the line
AddVMOption -Duser.language=en
in sqldeveloper.conf
I mentioned it first in Re: Folders with limited functionality about version 2.1.1.64 and then in 30EA2: Limited folder functionality with German language 3.0 EA2 and German language bug with user defined reports still not fixed Beta Release 3.0 EA3
Edited by: user1775992 on 22.11.2011 03:30

I have raised a bug on this issue and I am actively looking into it.

Bought iPhone as "SIM-Free", but it not work with my local SIM card

I have bought iPhone Serial No: 82108W75A4T in Canada as "SIM-Free", but it not work with my local SIM (Orange in Israel) card. Where to check: it is or not Factory Unlocked or have any hardware/software problems or have carrier ("adhered" any phone company)

In the local Orange: They tried with them SIM, the same negative result.
I have addressed to Canadien phone wireless carriers.
From some [Rogers'] has already received the answer:
... have checked our system and did not find your iPhone listed... Please contact Apple...

How do you configure Dreamweaver to accept PHP in live view when set up with a local testing server (ie., localhost:8888) via MAMP (not MAMP Pro)? My site shows up in the browser, but not in DM live view. Thanks.

I am using a Macbook Pro with Yosemite and cannot get live view to work in conjunction with my local server or with my php files.
What could be wrong? I have set up/synced everything with my root folder in htdocs.
Thanks:-)

See screenshots:
Nancy O.

How to configure sync with my local ftp server?

I have used XMarks since now because it hallow me to synchronize my bookmarks with my local server. Now XMarks don't work anymore because it's not more possible to synchronize the passwords.
Any other alternative imposes to use an external server and I don't want to use an external server. My data must remain on my machine it's absolutely excluded that i use an external unknown server for this.
The only solution must be a free solution (a real free solution) and the firefox synchronization seems to me the best/only one.
But I've not found how to configure it to use my own server.
So how to do it, where are the options to the synchronizer to give my own ftp server or whatever other server it needs?

iAS 6.0 sp4 officially does only support iPlanet Directory Server 5.0 sp1 and 4.13.
For more details visit: http://docs.iplanet.com/docs/manuals/ias/60/sp4/ig/prep.htm#42084
I guess, you can specify the directory server during the time of installation.
Thanks,
Rakesh.

Okay, i have 2 bugs with maverick. First, when I delete a file within a window, the files deletes but the preview doesn't delete until I close the window and reopen it. Second, I work on a network of computers and the search feature is now buggy...

Okay, i have 2 bugs with maverick. First, when I delete a file within a window, the files deletes but the preview doesn't delete until I close the window and reopen it. Second, I work on a network of computers and the search feature is now buggy... When I search for a file, A) it asks me if it's a name, or it wont produce anything, and B), its slower than in prior OS versions and in some instances I have to toggle to a different directory and go back to my original directory in the search: menu bar or the search wont produce anything... Very buggy.

It appears to me that network file access is buggy in Maverick.
In my case I have a USB Drive attached to airport extreme (new model) and when I open folders on that drive they all appear empty. If I right click and I select get info after a few minutes! I get a list of the content.
It makes impossible navigate a directory tree.
File access has been trashed in Maverick.
They have improved (read broken) Finder. I need to manage a way to downgrade to Lion again.

How can I Change data in a type def control containing a Xcontrol with a local variable

Hello
I made a Xcontrol and I inserted this control in a type def.
When I want to change the control's data with a local variable in a VI, the VI change nothing. The change of data isn't perform
How can I correct this issue?
Thanks for your help
Solved!
Go to Solution.

Hello,
What's your LabVIEW version ? Do you have a simple example program which demonstrates this behavior ?
I found another discussions related to your issues with Xcontrols:
updating type defs in Xcontrol Facade
No Data Change event generated for a XControl in a Type Def
XControl facede.vi
Hope this helps.
Regards,
Steve M.
National Instruments France
#adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
>> Vidéo-t'chats de l'été : présentations techniques et ingénieurs pour répondre à vos questions

App-V 5.0 // Visio - Project with Integration + local Office 2010 Deployment Kit and COM settings

Hi, I did read all the Microsoft and non-microsoft documentation first. However, I didn't find an answer to these 3 questions:
Situation:
* Locally installed Office 2010.
* Visio and Projects 2010 sequenced with App-V 5.0 SP3 sequencer with integration scenario (http://support.microsoft.com/kb/2830069)
* User-target of Visio and Project (I now according to documentation this should be published globally. Since not every user has a license this is no option. So far my tests do not show any problems with user-targeted visio/project)
* Visio has "allow COM objects to interact with the local system" and "OutOfProcessEnabled" enabled
1) When targeting both visio and project to the user with integration the licensing component only works for the first started application. Therefore I also install the licensing kit locally which make both the visio and project licensing work just fine.
Anyone sees a problem with having the license kit installed locally and stream the applications with integration on top? With my tests all seems to work well. The advantage of this is that I do not have to have separate packages for integration and non-integration
scenario's.
2) To make drag-and-drop from visio drawings in word work I enabled the COM interaction and I need also to set OutOfProcessEnabled="true". Does anyone now how to set OutOfProcessEnabled to true inside the .appv (it is possible with application
virtualization explorer) and not only manually afterwards in the xml's?
3) Should these COM settings be enabled for project as well? It seems that pasting in word from project has not the same interaction, it just pastes a table.

1. We did similar, installed that MSI for the licensing component locally, and streamed Project and Visio 2010, and so far so good.
2. There is no way to set those COM options inside the .appv. You can set integrated vs isolated, but no IP or OoP COM, you have to use the deployment XML.
3. This gets tougher to answer, but it goes to how much isolation do you want. Some of the articles are great just go over my head slightly, but have to deal with how the filter driver processes certain kinds of COM, IP or OoP. With Isolated
(as opposed to integrated) the COM systems (local and package) are totally isolated except for global exceptions.
With integrated, you can further 'integrate' the COM subsystems by enabling those options. Correct me if I'm mistaken though.
So do you need to? If everything works for you I'd say no, but you might find something else doesn't work without those settings.
Also very important, you cannot join a CG without those subsystems being equal. So if Project and Visio ever need to be in a CG together and the COM settings aren't identical, you will get an error at the client.
I really like this article but not going to lie it goes over my head a bit (a bit or a lot depending on my coffee intake)
http://blogs.technet.com/b/gladiatormsft/archive/2015/01/14/app-v-5-further-into-com-and-dynamic-virtualization.aspx

I am facing multiple application failures,system crash reports ,all with a locale id of 16393,

product name - HPG62 361TX, WINDOWS 7 ,Home BAsic,64 bit,
am facing several application failures and system crash reports,each with a locale id of 16393 in the problem signature,displayed in the problem reports of action centre these failures include-,NET RUNTIME OPTIMIZATION,ADOBE READER STOPPED WORKING,Anti Malware service Executable- Mp Telemetry,stopped working,bing bar stopped working,,TBApp error, COM surrogate stopped working,,comet bird stopped workingHost Process For Windows Services App crash, hp advisor App crash, HP Quick synchronisation service,HBPA Service stopped workinghpqwmiex module stopped working,,HPWMISVC application stopped working etc.. and all have a locale id of 16393,even replacement of ram has not solved this problem ; i fear this is a cpu core related problem, can anyone please confirm? the system starts normally but everytime it shows a warning/error message inthe event viewer log.
ever after reformatting the HD and replacing the ram , the problem still persist- shown by event viewer like boot performance monitoring,standby performance monitoring etc. please help me diagnose the hardwadre problem.

product name - HPG62 361TX, WINDOWS 7 ,Home BAsic,64 bit,
am facing several application failures and system crash reports,each with a locale id of 16393 in the problem signature,displayed in the problem reports of action centre these failures include-,NET RUNTIME OPTIMIZATION,ADOBE READER STOPPED WORKING,Anti Malware service Executable- Mp Telemetry,stopped working,bing bar stopped working,,TBApp error, COM surrogate stopped working,,comet bird stopped workingHost Process For Windows Services App crash, hp advisor App crash, HP Quick synchronisation service,HBPA Service stopped workinghpqwmiex module stopped working,,HPWMISVC application stopped working etc.. and all have a locale id of 16393,even replacement of ram has not solved this problem ; i fear this is a cpu core related problem, can anyone please confirm? the system starts normally but everytime it shows a warning/error message inthe event viewer log.
ever after reformatting the HD and replacing the ram , the problem still persist- shown by event viewer like boot performance monitoring,standby performance monitoring etc. please help me diagnose the hardwadre problem.

Bug with TURKISH local

Similar Messages

Maybe you are looking for