Build & Capture TS (MDT) - Capture fails at PrepareOS (sysprep) with "Boot Image package not found"

Hi all,
I'm searching for a while on this one now... I'm unable to perform a "ZeroTouch" Build & Capture of my reference machine to get a master image, with Capture Media it seems to be working, but this is a manual step...
While running a W7SP1 Build & Capture task sequence, the "Capture the reference machine" group fails at "PrepareOS". The step before "PrepareOS",  "Prepare ConfigMgr Client" runs without any issues.
The only error I can find, shows up in the report "OSD - history of a TS":
... 0005 that is either already released or we have not connected to it.
BootImage::ResolveImageSource( pszPackageId, sImagePackageSourcePath, sImageSourcePath), HRESULT=80070002 (e:\qfe\nts\sms\framework\tscore\bootimage.cpp,732)
TS::Boot::BootImage::StageBootImage(sPkgID), HRESULT=80070002 (e:\nts_sccm_release\sms\client\osdeployment\prepareos\prepareos.cpp,917)
PreStageWINPE(m_bDebug), HRESULT=80070002 (e:\nts_sccm_release\sms\client\osdeployment\prepareos\prepareos.cpp,1363)
pCmd->Sysprep(bActivate, bMsd), HRESULT=80070002 (e:\nts_sccm_release\sms\client\osdeployment\prepareos\main.cpp,270)
De-Initialization successful
Exiting with error code 2
sending with winhttp failed; 80072ee2
SendResourceRequest() failed. 80072ee2
Download() failed. 80072ee2.
Boot Image package not found.
he system cannot find the file specified. (Error: 80070002; Source: Windows)
Failed to pre-stage WINPE image, hr=0x80070002
Unable to sysprep the machine, hr=80070002
Sysprep'ing the machine failed, hr=80070002
I've searched the smsts.log file hundreds of times for errors, nothing there... 
Can anyone give me a clue or just something...? I really don't know what my next step, to make this work, could be...
Thanks!

The error Torsten pointed out gave me some clue... After much digging around on the web, I've stumbled upon this
article which led me into adding the following TS-variables:
SMSTSDownloadRetryCount: 5
SMSTSDownloadRetryDelay: 15
It seems to be working now on all types of hardware...
Case closed, thank you for the assistance! 
Let's hope this article can save someone a couple of days... :)
Wesley

Similar Messages

  • Time machine fails backing up with a "backup disk not found" error after upgrade to Lion 10.7.2

    Time machine fails backing up with a "backup disk not found" error after upgrade to Lion 10.7.2. I've erased and reformatted the drive; reconnected Time Machine(it saw it) and began a new backup. The backup starts again but fails before completing with backup drive not found error. I used the 10.7.2 combo update. Any help on how to fix this problem would be appreciated.

    Arghhhhhhhhhhhhhhhhhhh!!!!!!
    After waiting since October for a fix, I have now upgraded the firmware on the Time Capsule and installed the new Airport Utility, released yesterday, and the situation is even worse.
    Up until now, the Airport Utility had an option to disconnect all drives manually and the Time Capsule would then work until the next reboot – a temporary (?) work-around.
    Now that option does not exist in the new-look Airport Utility. And the Airport Utility installation can’t be rolled back and the old utility won’t restore.
    The sparesbundle is still not accessible. Anyone worked out a work-around in the new environment yet?
    I have another Time Machine backup working fine to a trusty old Lacie Drive so erased the one on my Time Capsule to see if that works. I have renamed the Capsule and the Time Capsule Drive.  But to build another full backup will take at least two days and I shall be away from tomorrow and am reluctant to leave the Capsule and computer up and running for a week. And I’ll bet the sparsbundle will still be nowhere to be found.
    How can Apple screw up so badly when they are to become the richest company in the entire world and – soon – will have more cash in the bank than the entire United States? Can’t they afford someone who really can sort this out? Especially when a Firewire connected hard drive – my trusty and simple LaCie – works fine.
    Words, almost, fail me.

  • The applicatio​n has failed to start dll bcaz libmex.dll was not found. Re-install​ing the applicatio​n may fix this problem

    Hi ,
      I am new to Labview & Matlab related Software. I am using LabView 8.20 and Matlab 6.5.1.199709 . I generated simple .dll(for adding 2 numbers) file with the help of Matlab and trying to use that dll file in Labview using "Call Library Function Node" control, then I am getting the following error.
    the application has failed to start dll because libmex.dll was not found. Re-installing the application may fix this problem
    Could any one help on this?
    Thanks & Rgds
    naveen

    Hello Naveen,
    The libmex.dll is installed by Matlab. It should ideally be located as \bin\win32. Check to make sure that this DLL is there.
    Also add the path to the DLLs to "Path" system variable (On XP: Start>>Control Panel>>System>>Advanced and click Environment Variables)
    Hope this helps,
    Chetan K
    AE-NIC

  • Error Message: The attempt to connect to the report server failed. Check your connection information and that the report server is a compatible version. The request failed with HTTP status 404: Not Found.

    I have a web page that contains a ReportViewer control.  I am trying to display a report, which is an .rdl file located on the SSRS server, in this ReportViewer control.  I have set the ReportPath and ReportServerUrl correctly.  I am
    getting an error message.
    Am I suppose to use an .rdlc file rather than a .rdl file?  Does the web server configuration need to use a certain account?
     I am getting the following error message:
    The attempt to connect to the report server failed. Check your connection information and that the report server is a compatible version.
    The request failed with HTTP status 404: Not Found.

    Hi bucaroov,
    The error "The request failed with HTTP status 404: Not Found." means the ReportServerURL configured in the ReportViewer control is invalid.
    Please follow these steps to solve the issue:
    Logon the Report Server machine.
    Open the Reporting Services Configuration Manager.
    Copy the Report Server URL from 'Web Services URL'.
    Logon the application server(in this case, it is the server that host the web page), check if we can use the URL we got from step 3 to access the Report Server. If so, please replace the ReportServerURL in the ReportViewer control with this URL. If it is
    not available, could you please post the error message.
    Additionaly, we don't need to provide the extension for a server report. The ReportPath should be like: /<reports folder>/<report name>
    For more information, please see:
    Walkthrough: Using the ReportViewer Control in Remote Mode:
    http://msdn.microsoft.com/en-us/library/ms251669(VS.80).aspx
    If you have any more questions, please feel free to ask.
    Thanks,
    Jin Chen
    Jin Chen - MSFT

  • The request failed with HTTP status 404: Not Found

    Hi
    BPC version we are using is : 5.0.502
    When we  Publish all reports using the steps below:
    a. Log into BPC Web
    b. Click on Available Interfaces> Select BPC for Administration
    c. Under Web Admin Task Click Publish Reports
    d. Select all of the reports and click the green check mark to publish the
    reports.
    I am getting following message 'System.Exception: The request failed with HTTP Status 404: Not Found. Event log relation to this error is given below.
    Event Type:     Error
    Event Source:     OutlookSoft log
    Event Category:     None
    Event ID:     0
    Date:          12/8/2008
    Time:          11:26:42 AM
    User:          N/A
    Computer:     BPCAPP
    Description:
    ==============[System Error Tracing]==============
    [System  Name] : OSoftCPM
    [Message Type] : ErrorMessage
    [Job Name]     : AuditMgrService/SetAuditReportFiles
    [DateTime]     : 12/8/2008 11:26:42 AM
    [UserId]       : MMPlanning
    [Exception]
        DetailMsg  : {The request failed with HTTP status 404: Not Found.}
    ==============[System Error Tracing  End ]==============
    For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.
    We tried ' Publish all reports' as the resolution of error 'object variable or with block variable not set' on modifying an application as per sap note Note 1131320
    If anyone knows the resolution for the above issue, please help me.
    Thanks in advance
    Sajeev Abraham

    Hi
    Thanks for the response.
    Below are the full contents of the error message pop-up.
    ( System.Expection: the reguest failed with HTTP status 404:Not found at
    Microsoft.Visualbasic.CompierServices.lateBinding.LateGet(Object o, Type,String name, Object
    []args,sTRING[]paramnames, Boolen[]CopyBack)
    at OSoft.Services.WebServices.ReportmanageProxy.ReportManageProxy.SetPubishReport(String strAppSet,string
    strApp,string strFiter)
    url is given below
    http://<HostName>/osoft/Admin/WebAdminMain.aspx
    BPC Deployment is Multiple server ( Two servers) Database and Application deployed seperately.
    Sql Reporting server is working.. I could connect using sql management studio.
    Thanks

  • Error: on clicking Registry menu item in ESM Management Portal. The request failed with HTTP status 404: Not Found.

    Hi,
    I have installed ESB Management Portal successfully after following all the steps. everything is working fine except when I click the Registry menu in the portal. I get an unhandled exception. The event viewer shows the below error "The request failed
    with HTTP status 404: Not Found."
    ================================================
    Event code: 3005 
    Event message: An unhandled exception has occurred. 
    Event time: 1/27/2015 5:56:10 PM 
    Event time (UTC): 1/27/2015 5:56:10 PM 
    Event ID: f7aedd39118845b79c17d3442a0d15a7 
    Event sequence: 54 
    Event occurrence: 1 
    Event detail code: 0 
    Application information: 
        Application domain: /LM/W3SVC/1/ROOT/ESB.Portal-1-130668549484455107 
        Trust level: Full 
        Application Virtual Path: /ESB.Portal 
        Application Path: C:\Projects\Microsoft.Practices.ESB\Source\Samples\Management Portal\ESB.Portal\ 
        Machine name: <Machine Name> 
    Process information: 
        Process ID: 4712 
        Process name: w3wp.exe 
        Account name: NT AUTHORITY\NETWORK SERVICE 
    Exception information: 
        Exception type: TargetInvocationException 
        Exception message: Exception has been thrown by the target of an invocation.
       at System.RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor)
       at System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal(Object obj, Object[] parameters, Object[] arguments)
       at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
       at System.Web.UI.WebControls.ObjectDataSourceView.InvokeMethod(ObjectDataSourceMethod method, Boolean disposeInstance, Object& instance)
       at System.Web.UI.WebControls.ObjectDataSourceView.ExecuteSelect(DataSourceSelectArguments arguments)
       at System.Web.UI.DataSourceView.Select(DataSourceSelectArguments arguments, DataSourceViewSelectCallback callback)
       at System.Web.UI.WebControls.DataBoundControl.PerformSelect()
       at System.Web.UI.WebControls.BaseDataBoundControl.EnsureDataBound()
       at System.Web.UI.WebControls.CompositeDataBoundControl.CreateChildControls()
       at System.Web.UI.Control.EnsureChildControls()
       at System.Web.UI.Control.PreRenderRecursiveInternal()
       at System.Web.UI.Control.PreRenderRecursiveInternal()
       at System.Web.UI.Control.PreRenderRecursiveInternal()
       at System.Web.UI.Control.PreRenderRecursiveInternal()
       at System.Web.UI.Control.PreRenderRecursiveInternal()
       at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
    The request failed with HTTP status 404: Not Found.
       at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
       at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
       at Microsoft.Practices.ESB.Portal.UDDIService.UDDIService.GetCategoryByName(String UDDIServerUrl, String tModelName) in c:\Projects\Microsoft.Practices.ESB\Source\Samples\Management Portal\ESB.Portal\Web References\UDDIService\Reference.cs:line
    575
       at Microsoft.Practices.ESB.Portal.Uddi.ServiceProxy.getBTEndpoints(String applicationName, Boolean getSendPorts, Boolean getRcvLocations) in c:\Projects\Microsoft.Practices.ESB\Source\Samples\Management Portal\ESB.Portal\Uddi\ServiceProxy.cs:line
    553
       at Microsoft.Practices.ESB.Portal.Uddi.ServiceProxy.GetEndpointsByApplication(String applicationName, Boolean getSendPorts, Boolean getRcvLocations) in c:\Projects\Microsoft.Practices.ESB\Source\Samples\Management Portal\ESB.Portal\Uddi\ServiceProxy.cs:line
    46
    Request information: 
        Request URL: http://localhost/ESB.Portal/uddi/uddi.aspx 
        Request path: /ESB.Portal/uddi/uddi.aspx 
        User host address: ::1 
        User: <domain>\<user>
        Is authenticated: True 
        Authentication Type: Negotiate 
        Thread account name: NT AUTHORITY\NETWORK SERVICE 
    Thread information: 
        Thread ID: 19 
        Thread account name: NT AUTHORITY\NETWORK SERVICE 
        Is impersonating: False 
        Stack trace:    at System.RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor)
       at System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal(Object obj, Object[] parameters, Object[] arguments)
       at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
       at System.Web.UI.WebControls.ObjectDataSourceView.InvokeMethod(ObjectDataSourceMethod method, Boolean disposeInstance, Object& instance)
       at System.Web.UI.WebControls.ObjectDataSourceView.ExecuteSelect(DataSourceSelectArguments arguments)
       at System.Web.UI.DataSourceView.Select(DataSourceSelectArguments arguments, DataSourceViewSelectCallback callback)
       at System.Web.UI.WebControls.DataBoundControl.PerformSelect()
       at System.Web.UI.WebControls.BaseDataBoundControl.EnsureDataBound()
       at System.Web.UI.WebControls.CompositeDataBoundControl.CreateChildControls()
       at System.Web.UI.Control.EnsureChildControls()
       at System.Web.UI.Control.PreRenderRecursiveInternal()
       at System.Web.UI.Control.PreRenderRecursiveInternal()
       at System.Web.UI.Control.PreRenderRecursiveInternal()
       at System.Web.UI.Control.PreRenderRecursiveInternal()
       at System.Web.UI.Control.PreRenderRecursiveInternal()
       at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
    Custom event details: 
    =================================
    Any idea why this is happening and what needs to be done ?
    PLEASE HELP
    Thanks & Regards
    Vikram

    Snippet from the link below:
    If you get a “404: Not Found” error, it ‘s because by default there is no script map for .svc file with default IIS 7.0 installation, so you need to register .svc extension in IIS:
    You need to update IIS script maps to register .svc extension In a command prompt (ran as administrator), execute the following command:
    “%windir%\Microsoft.NET\Framework\v3.0\Windows Communication Foundation\ServiceModelReg.exe” -r -y"
    Refer:
    https://dgoins.wordpress.com/2010/05/01/esb-toolkit-management-portal-installation-notes-from-the-field-2/
    Sarvanan's blog around this with detailed explanation:
    Configuring Exception Management Portal
    As mentioned above also
    Check Portal Configuration Settings
    Rachit
    Please mark as answer or vote as helpful if my reply does

  • Failed to add device to WCS Reason: Object not found in device

    Hi i am adding wlc (ver 7.0.116.0) to WCS (ver 7.0.164.0) and getting bellow error message.
    Failed to add device to WCS  Reason:  Object not found in device
    This controller was successfully added to the WCS before upgrading WLC ios to 7.0.116. Now i am unable to communicate with the controller thru WCS. The controller itself work ok and serve all WAPs with no issue.
    Any ideas would be appreciated.
    Regards.

    You will need to upgrade WCS to Version 7.0.172.0. WCS version 7.0.64.0 does not support or manage WLC version 7.0.116.0. Hope this helps.

  • Mac RDP Client (v8.0.10 on 10.10.1): HTTPEndPointException: 4, The non-proxy http connection failed to connect with the message: 404 Not Found

    My office is setting up a new gateway server.  I can connect to the old one just fine, but the new one is not allowing me to connect.  I can connect from my Windows VM, but not my Mac Client.  
    This is the log:
    2014-Nov-26 16:09:10] RDP (0): Final rdp configuration used: gatewayhostname:s:gat1.gibbscam.com
    screen mode id:i:0
    use multimon:i:0
    session bpp:i:24
    full address:s:dev-JeremyS2.gibbs.local
    audiomode:i:2
    username:s:Gibbs\JeremyS
    disable wallpaper:i:0
    disable full window drag:i:0
    disable menu anims:i:0
    disable themes:i:0
    alternate shell:s:
    shell working directory:s:
    authentication level:i:2
    connect to console:i:0
    gatewayusagemethod:i:1
    disable cursor setting:i:0
    allow font smoothing:i:1
    allow desktop com"font-family:Helvetica;line-height:normal;" />redirectprinters:i:0
    bookmarktype:i:3
    use redirection server name:i:0
    [2014-Nov-26 16:09:10] RDP (0): --- BEGIN INTERFACE LIST ---
    [2014-Nov-26 16:09:10] RDP (0): lo0 af=18  addr= netmask=
    [2014-Nov-26 16:09:10] RDP (0): lo0 af=30 (AF_INET6)  addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
    [2014-Nov-26 16:09:10] RDP (0): lo0 af=2 (AF_INET)  addr=127.0.0.1 netmask=255.0.0.0
    [2014-Nov-26 16:09:10] RDP (0): lo0 af=30 (AF_INET6)  addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 16:09:10] RDP (0): gif0 af=18  addr= netmask=
    [2014-Nov-26 16:09:10] RDP (0): stf0 af=18  addr= netmask=
    [2014-Nov-26 16:09:10] RDP (0): en0 af=18  addr= netmask=
    [2014-Nov-26 16:09:10] RDP (0): en1 af=18  addr= netmask=
    [2014-Nov-26 16:09:10] RDP (0): en1 af=30 (AF_INET6)  addr=fe80::1240:f3ff:fe97:e0b2%en1 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 16:09:10] RDP (0): en1 af=2 (AF_INET)  addr=192.168.0.5 netmask=255.255.255.0
    [2014-Nov-26 16:09:10] RDP (0): en1 af=30 (AF_INET6)  addr=2605:e000:63c2:f800:1240:f3ff:fe97:e0b2 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 16:09:10] RDP (0): en1 af=30 (AF_INET6)  addr=2605:e000:63c2:f800:65fb:7056:64eb:4363 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 16:09:10] RDP (0): fw0 af=18  addr= netmask=
    [2014-Nov-26 16:09:10] RDP (0): en2 af=18  addr= netmask=
    [2014-Nov-26 16:09:10] RDP (0): p2p0 af=18  addr= netmask=
    [2014-Nov-26 16:09:10] RDP (0): bridge0 af=18  addr= netmask=
    [2014-Nov-26 16:09:10] RDP (0): utun0 af=18  addr= netmask=
    [2014-Nov-26 16:09:10] RDP (0): utun0 af=30 (AF_INET6)  addr=fe80::ec38:250a:2a5d:3618%utun0 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 16:09:10] RDP (0): utun0 af=30 (AF_INET6)  addr=fd68:4c46:7658:e98e:ec38:250a:2a5d:3618 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 16:09:10] RDP (0): --- END INTERFACE LIST ---
    [2014-Nov-26 16:09:10] RDP (0): correlation id: d8afdeb7-ce3a-ceff-a6e8-51a5d5b40000
    [2014-Nov-26 16:09:10] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
    [2014-Nov-26 16:09:15] RDP (0): Exception caught: Exception in file '../../librdpclient/asiosocketendpoint.cpp' at line 521
        User Message : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote
    PC, and then try again.
    [2014-Nov-26 16:09:15] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
    [2014-Nov-26 16:09:15] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
    [2014-Nov-26 16:09:15] RDP (0): ------ END ACTIVE CONNECTION ------
    [2014-Nov-26 16:09:15] RDP (0): --- BEGIN INTERFACE LIST ---
    [2014-Nov-26 16:09:15] RDP (0): lo0 af=18  addr= netmask=
    [2014-Nov-26 16:09:15] RDP (0): lo0 af=30 (AF_INET6)  addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
    [2014-Nov-26 16:09:15] RDP (0): lo0 af=2 (AF_INET)  addr=127.0.0.1 netmask=255.0.0.0
    [2014-Nov-26 16:09:15] RDP (0): lo0 af=30 (AF_INET6)  addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 16:09:15] RDP (0): gif0 af=18  addr= netmask=
    [2014-Nov-26 16:09:15] RDP (0): stf0 af=18  addr= netmask=
    [2014-Nov-26 16:09:15] RDP (0): en0 af=18  addr= netmask=
    [2014-Nov-26 16:09:15] RDP (0): en1 af=18  addr= netmask=
    [2014-Nov-26 16:09:15] RDP (0): en1 af=30 (AF_INET6)  addr=fe80::1240:f3ff:fe97:e0b2%en1 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 16:09:15] RDP (0): en1 af=2 (AF_INET)  addr=192.168.0.5 netmask=255.255.255.0
    [2014-Nov-26 16:09:15] RDP (0): en1 af=30 (AF_INET6)  addr=2605:e000:63c2:f800:1240:f3ff:fe97:e0b2 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 16:09:15] RDP (0): en1 af=30 (AF_INET6)  addr=2605:e000:63c2:f800:65fb:7056:64eb:4363 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 16:09:15] RDP (0): fw0 af=18  addr= netmask=
    [2014-Nov-26 16:09:15] RDP (0): en2 af=18  addr= netmask=
    [2014-Nov-26 16:09:15] RDP (0): p2p0 af=18  addr= netmask=
    [2014-Nov-26 16:09:15] RDP (0): bridge0 af=18  addr= netmask=
    [2014-Nov-26 16:09:15] RDP (0): utun0 af=18  addr= netmask=
    [2014-Nov-26 16:09:15] RDP (0): utun0 af=30 (AF_INET6)  addr=fe80::ec38:250a:2a5d:3618%utun0 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 16:09:15] RDP (0): utun0 af=30 (AF_INET6)  addr=fd68:4c46:7658:e98e:ec38:250a:2a5d:3618 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 16:09:15] RDP (0): --- END INTERFACE LIST ---
    [2014-Nov-26 16:09:15] RDP (0): correlation id: 3d81bcf6-8d0e-fba8-b75e-bd2a247c0000
    [2014-Nov-26 16:09:15] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
    [2014-Nov-26 16:09:15] RDP (0): Resolved 'gat1.gibbscam.com' to '12.167.61.34' using NameResolveMethod_DNS(1)
    [2014-Nov-26 16:09:15] RDP (0): Resolved 'gat1.gibbscam.com' to '12.167.61.34' using NameResolveMethod_DNS(1)
    [2014-Nov-26 16:09:15] RDP (0): Exception caught: Exception in file '../../librdp/private/httpendpoint.cpp' at line 305
        User Message : HTTPEndpointException: 4, The non-proxy http connection failed to connect with the message: 404 Not
    Found
    [2014-Nov-26 16:09:15] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
    [2014-Nov-26 16:09:15] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
    [2014-Nov-26 16:09:16] RDP (0): ------ END ACTIVE CONNECTION ------
    And here's a log for server that I can connect to:
    [2014-Nov-26 15:52:20] RDP (0): Final rdp configuration used: gatewayhostname:s:gato.gibbscam.com
    screen mode id:i:0
    use multimon:i:1
    session bpp:i:24
    full address:s:dev-JeremyS2.gibbs.local
    audiomode:i:2
    username:s:Gibbs\JeremyS
    disable wallpaper:i:0
    disable full window drag:i:0
    disable menu anims:i:0
    disable themes:i:0
    alternate shell:s:
    shell working directory:s:
    authentication level:i:2
    connect to console:i:0
    gatewayusagemethod:i:1
    disable cursor setting:i:0
    allow font smoothing:i:1
    allow desktop com"font-family:Helvetica;line-height:normal;" />redirectprinters:i:0
    bookmarktype:i:3
    use redirection server name:i:0
    [2014-Nov-26 15:52:20] RDP (0): --- BEGIN INTERFACE LIST ---
    [2014-Nov-26 15:52:20] RDP (0): lo0 af=18  addr= netmask=
    [2014-Nov-26 15:52:20] RDP (0): lo0 af=30 (AF_INET6)  addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
    [2014-Nov-26 15:52:20] RDP (0): lo0 af=2 (AF_INET)  addr=127.0.0.1 netmask=255.0.0.0
    [2014-Nov-26 15:52:20] RDP (0): lo0 af=30 (AF_INET6)  addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 15:52:20] RDP (0): gif0 af=18  addr= netmask=
    [2014-Nov-26 15:52:20] RDP (0): stf0 af=18  addr= netmask=
    [2014-Nov-26 15:52:20] RDP (0): en0 af=18  addr= netmask=
    [2014-Nov-26 15:52:20] RDP (0): en1 af=18  addr= netmask=
    [2014-Nov-26 15:52:20] RDP (0): en1 af=30 (AF_INET6)  addr=fe80::1240:f3ff:fe97:e0b2%en1 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 15:52:20] RDP (0): en1 af=30 (AF_INET6)  addr=2605:e000:63c2:f800:1240:f3ff:fe97:e0b2 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 15:52:20] RDP (0): en1 af=30 (AF_INET6)  addr=2605:e000:63c2:f800:d111:af1b:b193:8d4e netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 15:52:20] RDP (0): en1 af=2 (AF_INET)  addr=192.168.0.5 netmask=255.255.255.0
    [2014-Nov-26 15:52:20] RDP (0): fw0 af=18  addr= netmask=
    [2014-Nov-26 15:52:20] RDP (0): en2 af=18  addr= netmask=
    [2014-Nov-26 15:52:20] RDP (0): p2p0 af=18  addr= netmask=
    [2014-Nov-26 15:52:20] RDP (0): bridge0 af=18  addr= netmask=
    [2014-Nov-26 15:52:20] RDP (0): utun0 af=18  addr= netmask=
    [2014-Nov-26 15:52:20] RDP (0): utun0 af=30 (AF_INET6)  addr=fe80::ec38:250a:2a5d:3618%utun0 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 15:52:20] RDP (0): utun0 af=30 (AF_INET6)  addr=fd68:4c46:7658:e98e:ec38:250a:2a5d:3618 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 15:52:20] RDP (0): --- END INTERFACE LIST ---
    [2014-Nov-26 15:52:20] RDP (0): correlation id: 3bea4411-4b23-c197-9b52-63f948a10000
    [2014-Nov-26 15:52:20] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
    [2014-Nov-26 15:52:25] RDP (0): Exception caught: Exception in file '../../librdpclient/asiosocketendpoint.cpp' at line 521
        User Message : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote
    PC, and then try again.
    [2014-Nov-26 15:52:25] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
    [2014-Nov-26 15:52:25] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
    [2014-Nov-26 15:52:25] RDP (0): ------ END ACTIVE CONNECTION ------
    [2014-Nov-26 15:52:25] RDP (0): --- BEGIN INTERFACE LIST ---
    [2014-Nov-26 15:52:25] RDP (0): lo0 af=18  addr= netmask=
    [2014-Nov-26 15:52:25] RDP (0): lo0 af=30 (AF_INET6)  addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
    [2014-Nov-26 15:52:25] RDP (0): lo0 af=2 (AF_INET)  addr=127.0.0.1 netmask=255.0.0.0
    [2014-Nov-26 15:52:25] RDP (0): lo0 af=30 (AF_INET6)  addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 15:52:25] RDP (0): gif0 af=18  addr= netmask=
    [2014-Nov-26 15:52:25] RDP (0): stf0 af=18  addr= netmask=
    [2014-Nov-26 15:52:25] RDP (0): en0 af=18  addr= netmask=
    [2014-Nov-26 15:52:25] RDP (0): en1 af=18  addr= netmask=
    [2014-Nov-26 15:52:25] RDP (0): en1 af=30 (AF_INET6)  addr=fe80::1240:f3ff:fe97:e0b2%en1 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 15:52:25] RDP (0): en1 af=30 (AF_INET6)  addr=2605:e000:63c2:f800:1240:f3ff:fe97:e0b2 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 15:52:25] RDP (0): en1 af=30 (AF_INET6)  addr=2605:e000:63c2:f800:d111:af1b:b193:8d4e netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 15:52:25] RDP (0): en1 af=2 (AF_INET)  addr=192.168.0.5 netmask=255.255.255.0
    [2014-Nov-26 15:52:25] RDP (0): fw0 af=18  addr= netmask=
    [2014-Nov-26 15:52:25] RDP (0): en2 af=18  addr= netmask=
    [2014-Nov-26 15:52:25] RDP (0): p2p0 af=18  addr= netmask=
    [2014-Nov-26 15:52:25] RDP (0): bridge0 af=18  addr= netmask=
    [2014-Nov-26 15:52:25] RDP (0): utun0 af=18  addr= netmask=
    [2014-Nov-26 15:52:25] RDP (0): utun0 af=30 (AF_INET6)  addr=fe80::ec38:250a:2a5d:3618%utun0 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 15:52:25] RDP (0): utun0 af=30 (AF_INET6)  addr=fd68:4c46:7658:e98e:ec38:250a:2a5d:3618 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 15:52:25] RDP (0): --- END INTERFACE LIST ---
    [2014-Nov-26 15:52:26] RDP (0): correlation id: 509122b5-d9b1-60f0-a0ac-b75a8dc20000
    [2014-Nov-26 15:52:26] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
    [2014-Nov-26 15:52:26] RDP (0): Resolved 'gato.gibbscam.com' to '12.167.61.35' using NameResolveMethod_DNS(1)
    [2014-Nov-26 15:52:26] RDP (0): Resolved 'gato.gibbscam.com' to '12.167.61.35' using NameResolveMethod_DNS(1)
    [2014-Nov-26 15:52:26] RDP (0): Protocol state changed to: ProtocolNegotiatingCredentials(2)
    [2014-Nov-26 15:52:27] RDP (0): Protocol state changed to: ProtocolConnectingRDP(3)
    [2014-Nov-26 15:52:27] RDP (0): Protocol state changed to: ProtocolInactive(4)
    [2014-Nov-26 15:52:28] RDP (0): Server supports RAIL
    [2014-Nov-26 15:52:28] RDP (0): Protocol state changed to: ProtocolActive(5)
    [2014-Nov-26 15:52:29] RDP (0): Server hides cursor
    [2014-Nov-26 15:52:31] RDP (0): Server shows cursor
    [2014-Nov-26 15:52:35] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
    [2014-Nov-26 15:52:35] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
    [2014-Nov-26 15:52:35] RDP (0): ------ END ACTIVE CONNECTION ------
    Any suggestions on what I can ask my IT department to change on the server so I can connect would be greatly appreciated. 

    Hi Jeremy,
    Thank you for posting in Windows Server Forum.
    From the error and other description it seems that there is some misconfiguration with setup. You need to provide the FQDN name of the server as might server name is not resolving its name properly and so facing issue. As seems from below details:
    [2014-Nov-26 15:52:20] RDP (0): Final rdp configuration used:gatewayhostname:s:gato.gibbscam.com
    screen mode id:i:0
    use multimon:i:1
    session bpp:i:24
    full address:s:dev-JeremyS2.gibbs.local
    Configuration used and full address name both appears different so please verify configuration accordingly.
    Please check the DNS record, check certificate whether it match FQDN name of the server with certificate name, also try to check to connect with IP address and see what result you can find.
    You can follow below guide to configure RD Gateway and after that verify the result.
    1. Deploying Remote Desktop Gateway RDS 2012
    2. How To Work with RD Gateway in Windows Server 2012
    Hope it helps!
    Thanks.
    Dharmesh Solanki
    TechNet Community Support

  • "workflow.asmx" method The request failed with HTTP status 404: Not Found.

    When consuming workflow.asmx webservice from , I am getting an error on below line number 3.
    1.POC.SPasmxWF.Workflow objSPasmxWF = new POC.SPasmxWF.Workflow();
    2.objSPasmxWF.Credentials = System.Net.CredentialCache.DefaultCredentials;
    3. XmlNode dataNode = objSPasmxWF.GetWorkflowDataForItem("http://in-mum01:7000/sites/PPP/2014-0002/PPPLibrary/GBL-IQ00120140008.doc");
    Error details: {"The request failed with HTTP status 404: Not Found."} "   at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean
    asyncCall)\r\n   at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)\r\n   at POC.SPasmxWF.Workflow.GetWorkflowDataForItem(String item) in E:\ERT\\Web References\\SPasmxWF\\Reference.cs:line 234\r\n
      at POC.Program.Main(String[] args) in E:\\POC\\POC\\Program.cs:line 27\r\n   at System.AppDomain._nExecuteAssembly(Assembly assembly, String[] args)\r\n   at Microsoft.VisualStudio.HostingProcess.HostProc.RunUsersAssembly()\r\n   at System.Threading.ExecutionContext.Run(ExecutionContext
    executionContext, ContextCallback callback, Object state)\r\n   at System.Threading.ThreadHelper.ThreadStart()"

    Hi,
    For a better troubleshooting, I suggest you to do as follows:
    1. On server side you can access the Workflow.asmx from IE to make sure there are no problems in code logic.
    2. On client side you can also access Workflow.asmx from IE to see if it returns error.
    3. Check the link below:
    http://www.mail-archive.com/[email protected]/msg02092.html
    If you want to operate the workflow in Client-Side,  we can use Client Object Model in SharePoint 2010 to achieve it.
    http://msdn.microsoft.com/en-us/library/microsoft.sharepoint.client.workflow(v=office.14).ASPX
    Thanks,
    Dennis Guo
    TechNet Community Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Dennis Guo
    TechNet Community Support

  • HT1926 Installing iTunes 11.1.4 on windows XP issues warning message: Service "Apple Mobile Device' failed to start. starting iTunes shows MSVCR80.dll not found.

    Normal update of iTunes to 11.1.4 fails. Suggests installing from web site
    I install from iTunes.com. Install issues the messages:
    Service "Apple Mobile Device' failed to start.
    Verify that you have sufficient privileges to start system services
    I do have necessary privilegs. I hit ignore. See window with successful install come up and finish with launch. I get the messages:
    iTunes was not installed correctly.
    Please reinstall iTunes
    Error 7 (Windows error 126)
    Tring to start iTunes from desktop gives:
    This application failed to start because MSVCR80.dll was not found
    Re-installing the application may fix the problem.
    Further repair or remove/reinstall does not fix the problem (including after reboot)
    Thie is the first time this has happened. I'm not sure where to go from here
    Thanks for any help.

    Earlier suggestion worked. That is, Use software add/remove to delete all 5 iTunes applications:
    Apple Application Support
    Apple Mobile Device Support
    Aple Sortware Update
    Bonjour
    iTunes
    Reboot and install/

  • Today, I got a "update iTunes and tonight, I can't access my iTunes. I uninstalled and reinstalled and the error message reads: iTunesexe-unable to locate component. App has failed to start due to MSVCR80.dll was not found: Reinstall may fix" but hasn't.

    I received an iTunes update today and updates files. Tonight, I couldn't acces my iTunes. I uninstalled and reinstalled and still getting same error message: iTunes exe unable to locate component. This application has failed to start because MSVCR80.DLL was not found. Reinstalling the application may fix this problem.  I've done it several times and still get the error.  I'm fearful I have lost all my music.  What can I do?

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • Application has failed to start b/c qtcf,dll was not found

    I recently had my computer serviced by the Geek squad for virus removal, I tried to use itunes and connect my ipod and I keep getting this message by: itunesHelper.exe- unable to locate component. "This application has failed to start because QTFC.dll was not found. Re-installing the application may fix this problem." I have tried to install Itunes and quick time player, but the same error pops up and I can't close the tab. Any suggestions?

    QTCF.dll
    Let's doublecheck on the current locations of that dll.
    Go "Start > Search" and then do an all files and folders search on QTCF.dll. In "More advanced options", make sure the following items are all checked:
    *Search System folders*
    *Search hidden files and folders*
    *Search subfolders*
    What QTCF.dll files do you find, and what are their file locations?

  • MDT user credentials error: Invalid credentials: The network path was not found

    I have DELL E5400 and DELL Optiplex 760 pc. In the before, DELL630 is working with my MDT service, but now, DELL E5400 and DELL Optiplex 760 not working with my MDT.
    When PE loaded and go to User Credentials interface, I input the user name and password(I confirm the user name and password is correct), it will display error message "Invalid credentials: The network path was not found". I checked that the network driver is correct.
    After search some information in the website, someone said that maybe the network initializing timeout issue, so I according to Tim Quan guide to add following to startnet.cmd
    wpeutil InitializeNetwork
    ping localhost
    wpeinit
    Then I update the deploy location in MDT and then re-loaded it again, but unlucky, I still meet the same issue. I tried to use ipconfig /all command to check the network status, I couldn't find out local network connection. I click "Cancel" to check the error message, it will display"A connection to the deployment share could not be made. The deployment will not proceed. DHCP lease was not obtained for any networking device!Possible cause: check physical connection".
    It seems that PE not loaded network driver successfully, but it is very strange that the network driver is correct.
    Have someone can help me?
    Thanks a lot

    Hi,
    Are you deploying Windows Vista 32bit or 64bit? Please obtain he latest network card drivers from the following sites:
    Dell Latitude E5400:
    http://support.dell.com/support/downloads/driverslist.aspx?c=us&cs=19&l=en&s=dhs&ServiceTag=&SystemID=LAT_E5400&os=WLH&osl=en&catid=&impid=
    Dell OptiPlex 760:
    http://support.dell.com/support/downloads/driverslist.aspx?c=us&cs=19&l=en&s=dhs&ServiceTag=&SystemID=PLX_760&os=WLH&osl=en&catid=&impid=
    Please make sure you add the correct network driver to deployment point.
    Additional Information:
    http://www.techtalkz.com/windows-deployment/501217-deployment-share-connection-issue-since-mdt-2008-waik-1-1-a.html
    http://www.deploymentforum.com/Community/Forums/tabid/124/forumid/16/postid/737/view/topic/Default.aspx
    Hope it helps.
    Tim Quan - MSFT

  • Quicktime would fail to write/export to server windows share with "Error -43: file not found" errors

    Summary:
    With the combination of Windows 7 and Quicktime 7.x, Quicktime would fail to write/export to server windows share with "Couldn't create output movie storage" and "Error -43: file not found" errors
    Steps to Reproduce:
    Trying to render to Quicktime files using network shared folders as a destination:
    Unable to open file. (-1610153459)
    The funny thing: it only happens when there are at least two shared folders mapped on the workstation, and the destination folder used for the rendered movie is not the first one.
    If we have only two mapped drives, F: and G: for example, and we try to render something to F:, everything works fine and no error is showed. But, when the destination is the G: drive, rendering never works, the error is showed, but a zero-byte file is created in F: (!!). ODD! If we remap F: drive with a different letter, but a letter BEFORE G:, the problem always happens. If we remap drive F: to any letter AFTER G:, making G: the first available network drive, rendering works. Also, simply unmapping F: and leaving G: as the only connected network folder makes render to work.
    We do not have a D: drive in our Windows 7 workstations, they are all C: only.
    It is a 100% reproducible problem. We tried with three different Active Directory networks and workstations. It has all of the features of a software bug.
    Any help would be appreciated.
    Cheers!
    Expected Results:
    Error -43: file not found
    Actual Results:
    The workaround seems to be to use the full path to the servers instead of the mapped mount point (ie //server/z/... instead of Z:/...
    Regression:
    All versions of quicktime 7 in combination with windows 7 client and more than one smb share point mapped in a letter.
    Notes:
    All software that uses quicktime movie exports showed this error.

    Not sure what file your are referencing?  Thanks for your suggestion, however, it's not relavant.
    It renders fine if you render to either the UNC path or the first mapped drive.
    i.e. If you have two mapped drives G: and H:
    they both point to \\fileserver\share1\folder
    If you render to H: it will fail, if you render to G: it works!  Same path, same user, same permissions.
    The only difference is H comes after G, so it fails... BUG.  If it was to do with anything else, underscores, permissions etc, it would fail on both.

  • The application failed to start (msvcp100.dll and atl100.dll not found)

    I recently have been getting this error upon opening up LabView 2012. I get two seperate error messages. The first says "The application failed to start because MSVCP100.DLL was not found. Re-installing this application may fix the problem." The other message says the same thing but it is ATL100.DLL that is not found.
    I think these files are part of the C runtime engine, but I don't know what I need to install to fix this issue.
    Solved!
    Go to Solution.

    Hello boochbrain, 
    I believe you are correct that these files are part of a runtime engine; specifically, the C++ runtime library.  Reinstalling these libraries could definitely alleviate these errors you are seeing.
    Here is a link to free download pages for various versions of this software on Microsoft's website:  http://www.microsoft.com/en-us/download/search.aspx?q=visual+c%2b%2b
    Let me know how it works out!
    Kevin W.
    Applications Engineer
    National Instruments

Maybe you are looking for

  • How can I move music from one computer to the other?

    We have a family computer with everyones music on it but my parents just got me a new laptop for x-mas and I want my music on mine. how do I move them?

  • My macbook pro can't "find" my disc (?!)

    I've just got the sims 3 island paradise and I've inserted the disc my macbook pro can't "find it". It asks me to insert the disc for me to be able to play when it's already in!? Why? Please help!!

  • Firefox not displaying fonts and sizes properly

    In firefox the fonts are not displaying properly they are either bold or small and bold some text is displayed normally but most is not most is either really small or bold. This is also the case for IE, im on windows 7 running latest versions. Howeve

  • Title on spine of hardcover book cut off

    Hi! I've been ordering books via iPhoto for many years and was shocked at the latest batch I received this week. I had chosen to do a hardcover book with wrap around cover.  The title on the spine was cut off, featuring only part of it which was odd

  • Upgrade to EHP1 java (Portal) alone from NW 7.0 SP12

    Hi We are in the process of upgrading our portal NW 7.0 SP12 to EHP1 SP06. Java FAQs says that we can use just JSPM to deploy as its just a java standalone. Has anyone used JSPM to upgrade to EHP1 from NW7.0? instead of EHPi? Thanks