Building to Devices in Debug mode, Error.
Hi All,
We are having an issue building my app in Debug mode to my physical devices, the error is posted below.
The device is dev unlocked and was working, but stopped with no warning. We can still work on the emulator and build in release mode to the device.
We have tried:
Reassociating it with the Windows Phone store.
Cleaning the solution.
Deleting obj and bin folders.
Rebuilding solutions
Running VS in admin mode.
Restarting the system.
Does anyone please have advice on how to resolve this issue as it is hurting our beta testing.
Error:
"Unable to activate Windows Store app 'App Name'. The Process started, but the activation request failed with error 'The app didn't start'"
Hi Tyroneallen281,
I found there is one similar question about the same problem. Please try the solution and let me know the result.
https://social.msdn.microsoft.com/Forums/en-US/fd4163fe-41c1-4c23-bc8d-be20cc5a70c3/error-code-the-app-didnt-start?forum=winappswithcsharp.
If it doesn’t work, please post more information about your scenario.
Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place. Click HERE to participate
the survey.
Similar Messages
-
Exporting release build on mac "GL pipe is running in sofware mode" error problem
Hey guys, i was having problems with the uploading an app to the Apple appstore because of the new rule for 64bit apps so i had to recompile all the anes and whatnot.
After having all the anes 64bit compatible, when i go to "Export release build" i get this error
"WARNING: GL pipe is running in software mode (Renderer ID=0x1020400)"
Only for the iOS version. The Android APK file compiles without any problems...Hi Bigmachini,
According to my solution, what about your issue now?
If you have been solved the issue, would you mind sharing us the solution here? So it would be helpful for other members who get the same issue.
If not, please let us know the latest information about it.
@Malik, could you please tell me if you try to check your issue by the above suggestion as I said?
If no, please try the above suggestions to check this issue and then tell me the latest message about this issue.
>>The error mostly occurs when debugging ADO.NET or database function calls. If code is run without debugging then there is no issue at all.
You could also try to copy your project and then debug your project in debug mode on a another machine you install same Windows 10 OS check this issue again.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Error when starting Weblogic in debug mode
Hi there
Has anyone experienced any difficulties when starting weblogic in debug mode.
More specifically, it cannot start correctly because it thinks that another instance
is using the same port (definately not the case).
Any clues/suggestions are greatly appreciated.
Error log follows:
<Mar 18, 2002 7:42:32 AM GMT+10:00> <Emergency> <WebLogicServer> <Unable to create
a server socket for port: 8320. java.net.BindException: Address already in use
Perhaps another process is using port 8320.>
<Mar 18, 2002 7:42:32 AM GMT+10:00> <Notice> <WebLogicServer> <SSLListenThread
listening on port 8321>
<Mar 18, 2002 7:42:32 AM GMT+10:00> <Emergency> <WebLogicServer> <The WebLogic
Server is no longer listening for connections. You should probably restart it.>
<Mar 18, 2002 7:42:32 AM GMT+10:00> <Alert> <WebLogicServer> <Server shutdown
has been requested by system>
<Mar 18, 2002 7:42:32 AM GMT+10:00> <Alert> <WebLogicServer> <The shutdown sequence
has been initiated.>
<Mar 18, 2002 7:42:32 AM GMT+10:00> <Info> <WebLogicServer> <Server shutdown is
commencing NOW and is irreversible.>
<Mar 18, 2002 7:42:32 AM GMT+10:00> <Error> <Performance Pack> <Unable to load
performance pack, using Java I/O.
java.lang.ThreadDeath
at java.lang.Thread.stop(Thread.java:581)
at weblogic.t3.srvr.T3Srvr.die(T3Srvr.java:764)
at weblogic.t3.srvr.T3Srvr.waitForDeath(T3Srvr.java:507)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:171)
at weblogic.Server.main(Server.java:35)Thanks for the suggestion.
Unfortunatley the port is definately free/available during startup.
Stephane Kergozien <[email protected]> wrote:
Maark,
Before starting your server, please could you check that the port is
not used by one
other process. You can use the netstat command to do this.
Regards
Stephane
Mark wrote:
Hi there
Has anyone experienced any difficulties when starting weblogic in debugmode.
More specifically, it cannot start correctly because it thinks thatanother instance
is using the same port (definately not the case).
Any clues/suggestions are greatly appreciated.
Error log follows:
<Mar 18, 2002 7:42:32 AM GMT+10:00> <Emergency> <WebLogicServer> <Unableto create
a server socket for port: 8320. java.net.BindException: Address alreadyin use
Perhaps another process is using port 8320.>
<Mar 18, 2002 7:42:32 AM GMT+10:00> <Notice> <WebLogicServer> <SSLListenThread
listening on port 8321>
<Mar 18, 2002 7:42:32 AM GMT+10:00> <Emergency> <WebLogicServer> <TheWebLogic
Server is no longer listening for connections. You should probablyrestart it.>
<Mar 18, 2002 7:42:32 AM GMT+10:00> <Alert> <WebLogicServer> <Servershutdown
has been requested by system>
<Mar 18, 2002 7:42:32 AM GMT+10:00> <Alert> <WebLogicServer> <The shutdownsequence
has been initiated.>
<Mar 18, 2002 7:42:32 AM GMT+10:00> <Info> <WebLogicServer> <Servershutdown is
commencing NOW and is irreversible.>
<Mar 18, 2002 7:42:32 AM GMT+10:00> <Error> <Performance Pack> <Unableto load
performance pack, using Java I/O.
java.lang.ThreadDeath
at java.lang.Thread.stop(Thread.java:581)
at weblogic.t3.srvr.T3Srvr.die(T3Srvr.java:764)
at weblogic.t3.srvr.T3Srvr.waitForDeath(T3Srvr.java:507)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:171)
at weblogic.Server.main(Server.java:35)--
Regards,
Stephane Kergozien
BEA Support -
Strange Error During Page Load in Debug Mode (only) - Please Help!
Hi All,
Data base version: oracle 11g
Apex version: Apex 4.1.1
Webserver: Apache
Need help with how to troubleshoot a Critical problem. The following error only occurs during page load in "Debug" mode. And, only occurs on a specific page within the application. A web page is served-up containing the following message and the application is blocked from running the page. The browser's (IE 8.0) back button must be clicked to proceed outside of "Debug" mode.
"Error occurred while painting error page: ORA-06502: PL/SQL: numeric or value error: character string buffer too small ORA-06502: PL/SQL: numeric or value error: character string buffer too small"
Debug log follows:
"S H O W: application="2006" page="6" workspace="" request="" session="500549669426301"
Computation point: Before Header
...Perform computation of item: APP_SERVER, type=FUNCTION_BODY
...Performing function body computation
...Execute Statement: declare function x return varchar2 is begin return owa_util.get_cgi_env('SERVER_NAME'); return null; end; begin wwv_flow.g_computation_result_vc := x; end;
......Result = 156.9.122.214
...Session State: Save "APP_SERVER" - saving same value: "156.9.122.214"
Processes - point: BEFORE_HEADER
...Process "GET_POSITION" - Type: PLSQL
...Execute Statement: begin wwv_flow.g_boolean := :F109_POSITION_ID IS NULL and :APP_PAGE_ID != 101; end;
......Result = FALSE
......Skip because condition or authorization evaluates to FALSE
...Process "Get JARS Sifter Log File Record Count" - Type: PLSQL
...Execute Statement: begin DECLARE vcnt NUMBER := 0; BEGIN d('Get JARS Sifter Log File Record Count'); Select count(*) into vcnt From JARS.JARS_SIFTER_LOG Where moveid = to_number(:P6_MOVEID) and sifter_status IN ('F','J'); :F1000_P6_SIFTER_LOG_COUNT := to_char(vcnt); END; end;
Custom: Get JARS Sifter Log File Record Count
...Process "Set PTM Planned Trip Status" - Type: PLSQL
......Skip because condition or authorization evaluates to FALSE
...compatibility mode - do not set mime type
...compatibility mode - do not set additional http headers
...close http header
...metadata, fetch item type settings
...metadata, fetch items
Show page template header
Rendering form open tag and internal values
Add error onto error stack
...Error data:
......message: Error processing request.
......additional_info: ORA-06502: PL/SQL: numeric or value error: character string buffer too small
......display_location: ON_ERROR_PAGE
......is_internal_error: true
......apex_error_code: APEX.UNHANDLED_ERROR
......ora_sqlcode: -6502
......ora_sqlerrm: ORA-06502: PL/SQL: numeric or value error: character string buffer too small
......error_backtrace: ORA-06512: at "APEX_040100.WWV_FLOW", line 3027 ORA-06512: at "APEX_040100.WWV_FLOW", line 7867
...Show Error on Error Page
......Performing rollback
Rendering form open tag and internal values
...Unhandled Error while painting error page: ORA-06502: PL/SQL: numeric or value error: character string buffer too small ORA-06502: PL/SQL: numeric or value error: character string buffer too small
...Error Backtrace: ORA-06512: at "APEX_040100.WWV_FLOW", line 2707 ORA-06512: at "APEX_040100.WWV_FLOW_ERROR", line 185
End Page Rendering"
Thanks!
BernardAll,
It appears that the page Javascript maximum limit size was reached. The error stopped appearing after some of the page Javascript code was removed out to Application Static Files. I wonder if there exists any "direct" indicator by the system whenever the size limit has been reached?
Again, the run error only occurred when the page was loaded in "Debug" mode.
Bernard -
Working in Debug mode, not after building the installation.
Hi,
I have a button to launch a form.
When I test it in debug mode, it works fine.
But, after making installation, if I do the same thing (press the button), I'm getting the following error:
Unexpected end of file while parsing name has occured. Line 1, position 2654.
Also, we have few add-ons operating on sales order.
When we open the sales order in client site through RDP, there is continuous flickering/refresh.
In in-house, we don't get that problem.
Please help me with this.
These are very critical issues for my release.
Thank you in advance.
Regards,
GeethaHi Geetha,
1.) button problem:
i don't know how you open the form - when you do it with a XML file maybe you packed the wrong XML file into your addon installer.
2.) the flickering can be a problem of formatted searches or interacting with other addons.
when addon a. changes a field it can be that addon b. does something because of the event from addon a.
the same can happen when you have formatted searches that do something when a field changes.
ok - that are my last tipps for this day
good night
David -
Error starting J2EE server in debug mode
I am trying to start the Sun 1.4 application server in a debug mode. I get an error
err:FATAL ERROR in native method: No transports initialized
: No such file or directory
Error [2] in bind() call!
Socket transport failed to init.
Transport dt_socket failed to initialize, rc = -1.
The setting in config.xml file is:-
debug-enabled="true" debug-options="-Xdebug -Xrunjdwp:transport=dt_socket,server=y,suspend=n,address=1044
Any help will be appreciated.
Thanks,
MilindI changed the port number and it worked. Not sure why port 1044 as specified in the Sun documentation doesnot work.
Milind -
ABAP Runtime error in debug mode
Hi all,
I am facing foll. run time error in debug mode
Runtime Error DBIF_RSQL_INVALID_CURSOR
Except. CX_SY_OPEN_SQL_DB
Possible causes in the application program:
Within a loop (SELECT/LOOP/EXEC SQL), one of the following
statements is used:
- MESSAGE (apart from MESSAGE S...)
- COMMIT WORK
- ROLLBACK WORK
- CALL SCREEN
- CALL DIALOG
- CALL TRANSACTION
- SUBMIT
- BREAK-POINT
- WAIT
In debugging mode, a program sometimes triggers
a "COMMIT WORK" during the database selection. As a result
this termination may also occur in debugging mode with a correct
program.
A "COMMIT WORK" during debugging may be due to the following reason
1. A program or screen was regenerated
and updated in the database.
2. Each user needs a private process in debugging mode, but
the number of available processes is restricted. If this
limit is exceeded, each debugging step then requires a
"COMMIT WORK".
its urgent.
if i run the prg directly to tcode der is not ne error.
but i want to execute the prg. in the debug mode.
its a ZPRG.
with regards,
Purva.hi,
You need to change your logic.
Then , i hope your problem wil be solved.
Because of nested select statements, you are getting that error.
Declare seperate Internal tables for VBRK,VBRP, KNA!,j_1iexchdr, j_1imtchid.
Declare Itab_final with all required fields from all tables.
Dont use select-endselect anywhere.
I am giving Pseudo code here.
Try to use this logic.
I used question mark in code : there you need to use ur required field names.
Hope it wil help you.
select vbeln kunrg zterm bukrs knumv netwr kunrg from vbrk into corresponding fields of table itab1
where vbeln = docno.
select matnr posnr arktx fkimg meins netwr werks aubel from vbrp into corresponding fields of table itab2 for all entries in itab1
where vbeln = itab-vbeln.
select name1 stras pstlz ort01 land1 from kna1 into corresponding fields of table itab3 for all entries in itab1
where kunnr = itab1-kunrg.
select preprn exdat docno from j_1iexchdr into corresponding fields of table itab4 for all entries in itab1
where rdoc = itab1-vbeln.
select j_1ichid from j_1imtchid into corresponding fields of table itab5 for all entries in itab2
where matnr = itab2-matnr.
Loop at itab1 into wa_itab1.
read table itab2 into wa_itab2 index sy-tabix.
read table itab3 into wa_itab2 index sy-tabix.
read table itab4 into wa_itab2 index sy-tabix.
read table itab5 into wa_itab2 index sy-tabix.
itab_final = itab1-?
itab_final = itab1-?
itab_final = itab2-?
itab_final = itab3-?
itab_final = itab4-?
itab_final = itab5-?
append itab.
endloop.
select eikto from knb1 into table wa_knb1
where kunnr = itab_fianl-kunrg
and bukrs = itab-bukrs.
select kawrt kbetr kwert kschl kposn knumv from konv into corresponding fields of wa_konv
where knumv = itab_fianl-knumv
and kposn = itab_final-posnr.
append wa_konv.
endselect.
Regards
Sandeep Reddy -
Error C3561: tile barrier operation...occurring in debug mode only
Hi,
I am new in C++ AMP, please, help me figure out why my code compile in Release mode, but C3561 occurring in debug mode.
At first, short version to demonstrate compile errors
parallel_for_each(D.extent.tile<TILE_SIZE>(), [=](concurrency::tiled_index<TILE_SIZE> t_idx) restrict(amp)
float threshold = P[t_idx.global];
tile_static float my_tile[TILE_SIZE];
tile_static int calculatedCount;
for (int stride=0; calculatedCount < TILE_SIZE; stride++)
my_tile[t_idx.local[0]] = P[t_idx.global[0] + stride*TILE_SIZE];
t_idx.barrier.wait();
for (int i =0; i < TILE_SIZE; i++)
if (my_tile[i] >= threshold)
D[t_idx.global] = 0;
calculatedCount++;
Short version does not compile in debug and release mode. Occurring very strange "tile barrier error" C3561.
However, full version shows more interesting results: compile errors only in debug mode,
parallel_for_each(D.extent.tile<TILE_SIZE>(), [=](concurrency::tiled_index<TILE_SIZE> t_idx) restrict(amp)
float threshold = P[t_idx.global] + tp;
float maxDrawdown = 0;
float open = P[t_idx.global];
tile_static float my_tile[TILE_SIZE];
tile_static int calculatedCount;
int stride = 0;
bool calculated = false;
calculatedCount = 0;
t_idx.barrier.wait();
for (; calculatedCount < TILE_SIZE; stride++)
if (t_idx.global[0] + stride*TILE_SIZE < sz)
my_tile[t_idx.local[0]] = P[t_idx.global + stride*TILE_SIZE];
t_idx.barrier.wait();
if (calculated)
continue;
for (int i = stride == 0 ? t_idx.local[0] : 0; i < TILE_SIZE; i++)
if (maxDrawdown < open - my_tile[i])
maxDrawdown = open - my_tile[i];
if (my_tile[i] >= threshold)
duration[t_idx.global] = stride*TILE_SIZE + i - t_idx.local[0];
D[t_idx.global] = maxDrawdown;
calculated = true;
calculatedCount++;
break;
if (stride*TILE_SIZE + i >= sz)
calculated = true;
calculatedCount++;
D[t_idx.global] = maxDrawdown;
duration[t_idx.global] = 0;
break;Hello, thank you for your inquiry. The issue here is that you have a race condition and control flow that is conditional on the variable that's subject to the race. To be precise, in the simplified example, the following:
calculatedCount++;
has the effect that every lane tries to increment calculatedCount. Since there are no guarantees about ordering or completion with the given code, the compiler (reasonably) fears that this might result in a case where some lanes break out of the loop while
others do not (different calculatedCount values per lane). This is invalid due to the fact that the body of the loop contains a barrier (all lanes must see a barrier i.e. control flow must not diverge around it). Hence the odd error. The solution here
could be to use an atomic increment on calculatedCount and add a barrier after the innermost loop, so that the outermost loop is tile-synchronous, like so:
for (int stride=0; calculatedCount < TILE_SIZE; stride++) {
my_tile[t_idx.local[0]] = P[t_idx.global[0] + stride*TILE_SIZE];
t_idx.barrier.wait();
for (int i =0; i < TILE_SIZE; i++) {
if (my_tile[i] >= threshold) {
D[t_idx.global] = 0;
concurrency::atomic_fetch_inc(&calculatedCount);
t_idx.barrier.wait();
Also, as a curiosity, what is the intent of the innermost loop? My reading of it suggests that it is in error i.e. each value that you cache ends up being processed multiple times: all lanes process [0], then [1], then [2] etc. If [0] is above the threshold,
this means that you end the loop after processing just that one datum. Since I presume you want to process the data in my_tile, the way to achieve that is to remove the for and leave the body modified like so:
for (int stride=0; calculatedCount < TILE_SIZE; stride++) {
my_tile[t_idx.local[0]] = P[t_idx.global[0] + stride*TILE_SIZE];
t_idx.barrier.wait();
if (my_tile[i] >= threshold) {
D[t_idx.global] = 0;
concurrency::atomic_fetch_inc(&calculatedCount);
t_idx.barrier.wait();
Hope this helps! Cheers! -
Debug mode makes run time errors go away
I'm writing a very simple console app for my own training purposes. The goal is to be able to pass a month name and a starting weekday, and then generate an appropriate calendar display for the month.
The default package imports my own package, which contains two classes. One is intended to handle the calendar manipulations, and the function that actually does set up the days of the month, throws a user defined exception, "invalid_day_excecption", if an invalid weekday name is passed.
My question is this: When I run this app in Debug mode, all exception handling works correctly. But when I run in Execute mode, I get a java.lang.NoClassDefFound error on the invalid_day_exception, even when it appears that it shouldn't be thrown.Just to dispel the possibility, I would try running
your program outside of an IDE. It appears from your
description as though whatever process you may be
using for running your application could have some
errors. If that still doesn't work, make sure that
the class files were compiled to the right places.
Good luck!You know, that's the second time today someone has hinted that IDE's bring with them a lot of problems of this type. Apparently there's more to them than all the GUI, flash, and color coded keywords! -
VS2013 not running in debug mode on Windows 10 Technical Preview Build 10041
am getting the following errors every time i try to run my projects in debug mode what can be the issue.
Managed Debugging Assistant 'FatalExecutionEngineError' has detected a problem in 'C:\Program Files (x86)\IIS Express\iisexpress.exe'.
Additional information: The runtime has encountered a fatal error. The address of the error was at 0x73c0d5a5, on thread 0x1a0c. The error code is 0xc0000005. This error may be a bug in the CLR or in the unsafe or non-verifiable portions of user
code. Common sources of this bug include user marshaling errors for COM-interop or PInvoke, which may corrupt the stack.
Then when I continue the following appears
An unhandled exception of type 'System.AccessViolationException' occurred in System.Data.dll
Additional information: Attempted to read or write protected memory. This is often an indication that other memory is corrupt.
Then it stops..
This happens when a database call is made and only does this when debug, when I run it using the browser link all is good. The applications work well.Hi Bigmachini,
According to my solution, what about your issue now?
If you have been solved the issue, would you mind sharing us the solution here? So it would be helpful for other members who get the same issue.
If not, please let us know the latest information about it.
@Malik, could you please tell me if you try to check your issue by the above suggestion as I said?
If no, please try the above suggestions to check this issue and then tell me the latest message about this issue.
>>The error mostly occurs when debugging ADO.NET or database function calls. If code is run without debugging then there is no issue at all.
You could also try to copy your project and then debug your project in debug mode on a another machine you install same Windows 10 OS check this issue again.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Server Error Running in Debug Mode
Has anyone been able to run EA in debugging mode with the J2EE 1.4 application server?
When I try, here's what happens:
1. The server is stopped in preparation to run in debug mode
2. The server restarts
3. Before deployment the server dies with this error message:
java.io.IOException. Unable to connect to admin-server ...
This is for port localhost:4848There are a couple problems with debugging in EA:
1) The debug port may be in use. Sounds like what you may be seeing. Assuming you're running on Windows, run "netstat -ano" to find out if port 1044 is in use. That's the debug port.. Kill the process that is using the port. This may require a reboot if the owner is System.
2) The second problem is that on Windows, you may only be able to debug once without restarting the server. Non-Windows doesn't have this problem. The plan is to fix this in a future release. -
JNI calls using dll build in DEBUG mode
I have deployed a filter which loads a dll in the init method. The dll is build in DEBUG mode. The doFilter() method is never called. But If I build the same dll with out DEBUG parameter the doFilter() method is called. what is the issue? I need to debug the dll by attaching it to Visual Studio.
--JArchie> i had a requirement to invoke a RFC Async and recieve
> the results in my program ...
That is not possible. When you call an RFC async, you cannot receive the result of the RFC. If you want the results, you have to call the RFC syncronously.
When you debug, the debugger calls the RFC synchronously, to enable you the debugging of the RFC.
Regards
Stefan -
Customer Exit var (basedOn 0P_KEYDT) ABAP error - Going into Debug mode
Hello All,
I have created a BEX Query based on Infoset, so i couldnt use '0P_KEYDT' SAP Exit in a variable.
Instead i created a Z 'Customer exit' with the same code.
But when i execute query in RSRT, query is going into Debug mode.
InfoProviders are all active, when i remove the Z 'Customer Exit' from the query then query is running fine. So i see that the problem is with the Z 'Customer exit' code.
Here is the 0P_KEYDT code:
FUNCTION RSVAREXIT_0P_KEYDT.
*"*"Lokale Schnittstelle:
*" IMPORTING
*" VALUE(I_VNAM) LIKE RSZGLOBV-VNAM
*" VALUE(I_VARTYP) LIKE RSZGLOBV-VARTYP
*" VALUE(I_IOBJNM) LIKE RSZGLOBV-IOBJNM
*" VALUE(I_S_COB_PRO) TYPE RSD_S_COB_PRO
*" VALUE(I_S_RKB1D) TYPE RSR_S_RKB1D
*" VALUE(I_S_RKB1F) TYPE RRO01_S_RKB1F
*" VALUE(I_THX_VAR) TYPE RRO01_THX_VAR
*" VALUE(I_STEP) TYPE I DEFAULT 0
*" EXPORTING
*" VALUE(E_T_RANGE) TYPE RSR_T_RANGESID
*" EXCEPTIONS
*" UNKNOWN_VARIABLE
*" UNEXPECTED_VARTYPE
*" VARIABLE_INITIAL
DATA:
LS_RA_SID TYPE RSR_S_RANGESID.
IF I_STEP EQ 0 OR " without popup or
I_STEP EQ 1. " before popup
REFRESH E_T_RANGE.
CLEAR: LS_RA_SID.
LS_RA_SID-SIGN = 'I'.
LS_RA_SID-OPT = 'EQ'.
LS_RA_SID-LOW = SY-DATUM.
APPEND LS_RA_SID TO E_T_RANGE.
ENDIF.
ENDFUNCTION.
Here is Z 'Cusotmer Exit Code: (Defined I-STEP and E_T_RANGE)
method ZPKEYDT.
Data: ls_var_range TYPE rrs0_s_var_range,
l_s_range TYPE rsr_s_rangesid.
IF I_STEP EQ 1.
REFRESH e_t_range.
CLEAR: l_s_range.
l_s_range-SIGN = 'I'.
l_s_range-OPT = 'EQ'.
l_s_range-LOW = sy-datum.
APPEND l_s_range TO e_t_range.
ENDIF.
endmethod.
I could really appreciate your help!
Thanks in advance,
DCHi DeeCh.
If you want to populate the value before the variabel screen input.then please follow below code
case i_vnam.
when 'ZPKEYDT'.
if i_step = 1.
l_s_range-low = sy-datum..
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
APPEND l_s_range TO e_t_range.
clear l_s_range.
endif.
endcase.
Regards,
Nanda.S -
RS232 wont start in rtexe, but runs just fine in Debug Mode
Hi Guys,
first of all sorry for my bad english!
I have a "little" problem with my Program, especially with the builded version of my program.
As long as I am connected via my Windows machine and in the Debug Mode of my Main.vi everything works just fine, no errors and does what its intended to do.
But when i try to build my rtexe and run it as startup it wont open rs232 connection to my devices.
Any Ideas?
My installed VISA Version is 5.4.1 and I am running LV 2013 SP1.
Target is a cRIO 9082, also VISA 5.4.1 and NI RIO 13.1
Funny thing is it worked just fine a few builds back, but I did no changes on my System.Sry for not replien earlier, I dont have access to the machine every day.
So i just added a log for the error codes and got: -1073807343
Now I am even more confused, how could that be? It says " Insufficient location information or the device or resource is not present in the system."
I am using COM7 and COM8, and as u can see in the attachment they are there! And the also work when i start the vi on my windows machine?!
Attachments:
Clipboard01.jpg 99 KB -
Flex Builder 3 Beta 3 Debugging not working with latest Flash Player Debug
First to emphasize that never had such issues with Flex
Builder 2 Beta 2 and Flash Player 9.0.47 Debug version.
I downloaded Flex Builder 3 Beta 3 and installed it. Then
trying to debug any Flex app (old or newly created) does not work.
I don’t get any errors, but after some research I saw
it’s nagging up on trying to connect to the Flash Player
debug version.
1. Uninstalled old versions of Flash Player (FP).
2. Downloaded latest debug version of FP 9 (9.0.115) and
installed it both for IE and Opera (Netscape-compatible).
3. Installed Flex Builder 3 Beta 3.
4. Created a simple Flex app.
5. Ran it in debug mode.
6. Showed a small window with title “Progress
Information” and a progress + text: Waiting for Flash Player
to connect to debugger…
7. Two minutes later I got the error: “Failed to
connect; session timed out. Ensure that: 1. You compiled your Flash
application with debugging on. 2. You are running the debugger
version of Flash Player.”
Any idea what is wrong? I tried to download an older debug
version but then FB 3 Beta 3 raises the error it’s expecting
version 9.0.115. I searched to download FB3 Beta 2 (because I
deleted it after downloading Beta 3) but unfortunately Adobe did
their best to wipe it out from their links.
Any help is welcome.
System Specs:
Windows Vista Ultimate
Flex Builder 3 Beta 3 Standalone
JRE 1.6 Update 3
-DimitarHi Dimitar,
Did you close all the browsers (and applications which use
Flash Player) when you install Flex Builder 3 Beta 3 or Flash
Player? You can try manually installing it from <FB install
location>/player/ directory. Here're some
installation/unintallation instructions of Flash Player:
http://labs.adobe.com/wiki/index.php/Flex_3:Release_Notes#Installing_Flex_SDK_3_Beta_3
thanks,
Sharon
Maybe you are looking for
-
Problem in Installing PetStore 1.3
Dears, I am facing problem in installing petstore following is my console's out put.Please advise. I am following the same instructions provided in the docs. E:\j2sdkee1.2.1\public_html\petstore1.3>setup Buildfile: setup.xml init: help: [echo] Before
-
Why are photos received as attachments not coming in correctly?
I am sending photos from my MacBook Pro using Lightroom 4 and a gmail account. I'm sending them to an aol account and trying to open them on my new iPad (3). My sent mail shows that 3 different photos were sent, but my received mail shows the first p
-
I can drag music onto my ipod touch from iTunes on my pc but it wont fully load - greyed out with circular arrow symbol -any ideas what the problem is?
-
Scheduling a job in time interval
hi , i have to shcedule a job which have to run between 6a.m to 9 p.m how can i schedule it.
-
Idea - free floating panels and windows
Hi I would like to see the free floating windows we had in previous versions in CS6. They were so flexible. Perhaps they are there but I could not locate them. I run macbook pro/ lion/ external monitor. thanks