Error starting J2EE server in debug mode

I am trying to start the Sun 1.4 application server in a debug mode. I get an error
err:FATAL ERROR in native method: No transports initialized
: No such file or directory
Error [2] in bind() call!
Socket transport failed to init.
Transport dt_socket failed to initialize, rc = -1.
The setting in config.xml file is:-
debug-enabled="true" debug-options="-Xdebug -Xrunjdwp:transport=dt_socket,server=y,suspend=n,address=1044
Any help will be appreciated.
Thanks,
Milind

I changed the port number and it worked. Not sure why port 1044 as specified in the Sun documentation doesnot work.
Milind

Similar Messages

Start weblogic server in debug mode through command prompt

Hi,
Please help me in starting the weblogic server in debug mode through command prompt.I am using weblogic 10.3.6 app server.
Thanks

Hi,
To debug weblogic startup issues you can pass the below jvm arguments:
-Dweblogic.slc=true
-Dweblogic.debug.DebugServerLifeCycle=true
Debug options are available in weblogic based on the subsystem, such as security, jms, jdbc, deployment..etc
You can refer to :
https://blogs.oracle.com/vijaya/entry/weblogic_web_service_debug_flags
Thanks,
Sharmela

Starting J2EE server in console mode

Hello Everyone,
I have just installed WAS 640 SP3 J2EE only on AIX5.2 unix server. J2ee server starts and stops without any problem. I can even see the J2EE engine through the web.
Administrator user is locked because of the wrong password entries. I am trying to follow OSS note : 669848, it explains how to unlock Administrator user for SP3 systems which requires to stop the Java instance and start it console mode by jlaunch. when I run the following command after setting the LIBPATH to /usr/sap/NWS/JC00/j2ee/os_libs, but it never put me the console mode.
"jlaunch -file=/usr/sap/NWS/JC00/j2ee/cluster/instance.properties -nodeName=ID1693850 pf=/usr/sap/NWS/SYS/profile/NWS_JC00_cgunx130 -traceFile=tracefile3.log -startMode=console".
tracefile3.log shows the following error message at the end.
Fri Dec 17 17:44:25 2004
ERROR => DlLoadLib: dlopen()= No such file or directory -> DLENOACCESS (2,No
such file or directory) [dlux_mt.c 310]
ERROR => Can't load VM shared library (libjvm.a) (rc=-2) [jhvmxx_mt.c 1380]
ERROR => Cannot load DLL for Java VM [jlnchxxi_mt. 527]
I use java 1.4.1
cgunx130:nwsadm 22> java -version
java version "1.4.1"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.1)
Classic VM (build 1.4.1, J2RE 1.4.1 IBM AIX 5L for PowerPC (64 bit JVM) build caix641411-20040301 (JIT enabled: jitc))
Could you please help me to UNLOCK the Administrator user.
Thanks,
Tuncay

Please, can u put how do you resolve the problem, i've the same situation.
eulerss

Error starting J2EE server

I have recently installed the J2EE SDK 1.3.1 and J2SE SDK 1.4.1_02. Upon starting the j2ee server (j2ee -verbose), get the following error message.
Exception in thread "main" java.lang.ExceptionInInitializerError
at com.sun.enterprise.server.J2EEServer.run(J2EEServer.java:175)
at com.sun.enterprise.server.J2EEServer.main(J2EEServer.java:972)
Caused by: java.lang.NullPointerException
at java.net.InetAddress.cacheAddress(InetAddress.java:648)
at java.net.InetAddress.cacheAddress(InetAddress.java:633)
at java.net.InetAddress.getAddressFromNameService(InetAddress.java:1016)
at java.net.InetAddress.getLocalHost(InetAddress.java:1125)
at com.sun.enterprise.util.Utility.getLocalHost(Utility.java:56)
at com.sun.enterprise.repository.ConfigurationImpl.<clinit>(ConfigurationImpl.java:18)
... 2 more
I am running Linux 7.2, Apache 1.3.27, Tomcat 4.1.24., and have two (2) NICs.
Any ideas on what might cause this issue?

I believe I got the server working. The system may have had an issue recognizing the environmental variables being set in the .bash_profile and the setconfig.sh.
If anyone could clarify the errors above, I would greatly appreciate the information.
J2EE server listen port: 1050
Naming service started:1050
Binding DataSource, name = jdbc/DB1, url = jdbc:cloudscape:rmi:CloudscapeDB;create=true
Binding DataSource, name = jdbc/DB2, url = jdbc:cloudscape:rmi:CloudscapeDB;create=true
Binding DataSource, name = jdbc/InventoryDB, url = jdbc:cloudscape:rmi:CloudscapeDB;create=true
Binding DataSource, name = jdbc/Cloudscape, url = jdbc:cloudscape:rmi:CloudscapeDB;create=true
Binding DataSource, name = jdbc/EstoreDB, url = jdbc:cloudscape:rmi:CloudscapeDB;create=true
Binding DataSource, name = jdbc/XACloudscape, url = jdbc/XACloudscape__xa
Binding DataSource, name = jdbc/XACloudscape__xa, dataSource = COM.cloudscape.core.RemoteXaDataSource@1c208b0
Starting JMS service...
Initialization complete - waiting for client requests
Binding: < JMS Destination : jms/Queue , javax.jms.Queue >
Binding: < JMS Destination : jms/Topic , javax.jms.Topic >
Binding: < JMS Cnx Factory : QueueConnectionFactory , Queue , No properties >
Binding: < JMS Cnx Factory : jms/QueueConnectionFactory , Queue , No properties
>
Binding: < JMS Cnx Factory : jms/TopicConnectionFactory , Topic , No properties
>
Binding: < JMS Cnx Factory : TopicConnectionFactory , Topic , No properties >
Starting web service at port: 8000
Starting secure web service at port: 7000
J2EE SDK/1.3.1
Starting web service at port: 9191
J2EE SDK/1.3.1
J2EE server startup complete.

How to start the server in debug mode

HI
Im working on weblogic server 8.1 sp. My requirement is to run the application in hosted on weblogic server with out restaring the server i.e dynamiically turn to debug mode with out stopping. IM using Log4j method for logging. please let me know how to do it... if any one have sample java code
Thanks & regards
shiva

I am not sure, how can you do it on the fly, but if you want to restart the server here are the parameters you need to add to the java arguments
-Xdebug -Xrunjdwp:transport=dt_socket,server=y,suspend=n,address=$Port
(where Port will be any port you want to connect to).
Thanks
Togotutor
<a class="jive-link-external" href="http://www.togotutor.com">http://www.togotutor.com</a> (Learn Programming and Administration for Free)
Edited by: togotutor on Aug 12, 2010 3:44 PM

Starting Server in Debug Mode - Need Some Advice Plz.

Hi Guys,
I have an EP SP 12 Server Running and I am trying to Start the Server in Debug mode from the Netweaver Developer Studio but when I right click the Server and try to choose Debug, the option is greyed out and even while viewing the Debug option from the SAPMMC I see that under the column Debug, it say 'Disabled' for the Server and Dispatcher.
Can anyone suggest how this can be done, I would appreciate any help as I have been working on this for some time.
Best Wishes,
John.
Message was edited by: John Bray
Message was edited by: John Bray

Hi John,
If the you cannot start the server in the debugging mode through the NWDS then you can try the other way round.
Through Config Tool:
You can enable the debuggine mode from the Config Tool as well. Just visit the following path :
C:\usr\sap\<SID>\JC<SYS_NO>\j2ee\configtool\configtool.bat
Click on the your instance. Then under the tab VM Environment, Set the DebugMode = true.
Restart the engine now. This will open the J2EE server again in the Debug Mode.
I hope this helps you!!
Regards
Pravesh
PS: Please conside rewarding points if helpful and solved.

How to start server in debug mode by default

Hi,
Whenever the server starts it does not start in debug mode.
One has to manually start the "SDM" and "Server0" in the debug mode.
Is there a way I can make the server start in debug mode for the first time itself.
regards,
Saurabh

Hi Saurabh,
You can start the server in debug mode using config tool. Just open cofig tool (/usr/sap/<SYS ID>/JC<SYS NR>/j2ee/configtool/configtool.bat).
Click on the your instance. Then under the tab Servers Debug check Debuggable and also Enable Debug mode.
Restart the engine now.
However a word of caution: Starting the server in debug mode decreases the system performance. You should only start the dev server in debug mode.
Hope this helps.
Regards
Sidharth

SOA Server in Debug mode

How to start SOA server in Debug mode and what kind of errors or issues going to face.
What is the use to start SOA server in Debug mode.

Try this.
http://docs.oracle.com/cd/B31017_01/web.1013/b28950/sysprops.htm
Thanks,
Vijay

Error when starting j2ee server, please help

JMS expert,
I am using j2sdkee1.3 with jdk1.3.1_01 over NT system. When I started JMS provider by "j2ee -verbose", I got an exception saying "TCP/IP ports(1050) in use by another process". Then I tried other port numbers like 1051 and 1061, the same error kept coming. What is the best port number I should use or whatelse I should do to solve this problem? Thanks.
C:\j2sdkee1.3\jms_execise>c:\j2sdkee1.3\bin\j2ee -verbose
J2EE server listen port: 1081
org.omg.CORBA.INTERNAL: minor code: 1398079697 completed: No
at com.sun.corba.ee.internal.iiop.GIOPImpl.createListener(GIOPImpl.java:256)
at com.sun.corba.ee.internal.iiop.GIOPImpl.getEndpoint(GIOPImpl.java:205)
at com.sun.corba.ee.internal.iiop.GIOPImpl.initEndpoints(GIOPImpl.java:140)
at com.sun.corba.ee.internal.POA.POAORB.getServerEndpoint(POAORB.java:488)
at com.sun.corba.ee.internal.POA.POAImpl.pre_initialize(POAImpl.java:154)
at com.sun.corba.ee.internal.POA.POAImpl.<init>(POAImpl.java:112)
at com.sun.corba.ee.internal.POA.POAORB.makeRootPOA(POAORB.java:110)
at com.sun.corba.ee.internal.POA.POAORB$1.evaluate(POAORB.java:128)
at com.sun.corba.ee.internal.core.Future.evaluate(Future.java:21)
at com.sun.corba.ee.internal.corba.ORB.resolveInitialReference(ORB.java:2421)
at com.sun.corba.ee.internal.corba.ORB.resolve_initial_references(ORB.java:2356)
at com.sun.enterprise.server.J2EEServer.run(J2EEServer.java:193)
at com.sun.enterprise.server.J2EEServer.main(J2EEServer.java:913)
java.lang.RuntimeException: Unable to create ORB. Possible causes include TCP/IP ports in use by another process
at com.sun.enterprise.server.J2EEServer.run(J2EEServer.java:203)
at com.sun.enterprise.server.J2EEServer.main(J2EEServer.java:913)
java.lang.RuntimeException: Unable to create ORB. Possible causes include TCP/IP ports in use by another process
at com.sun.enterprise.server.J2EEServer.run(J2EEServer.java:203)
at com.sun.enterprise.server.J2EEServer.main(J2EEServer.java:913)
java.lang.RuntimeException: Unable to create ORB. Possible causes include TCP/IP ports in use by another process
at com.sun.enterprise.server.J2EEServer.run(J2EEServer.java:350)
at com.sun.enterprise.server.J2EEServer.main(J2EEServer.java:913)
J2EE server reported the following error: Unable to create ORB. Possible causes include TCP/IP ports in use by another process
Error executing J2EE server ...
****************************************************************

Hello.,
Did you get a resolution to this error ? I get the same error, odd thing is that i had it working for several days and now it won;t start ?
JMS expert,
I am using j2sdkee1.3 with jdk1.3.1_01 over NT system.
When I started JMS provider by "j2ee -verbose", I got
an exception saying "TCP/IP ports(1050) in use by
another process". Then I tried other port numbers like
1051 and 1061, the same error kept coming. What is
the best port number I should use or whatelse I should
do to solve this problem? Thanks.
C:\j2sdkee1.3\jms_execise>c:\j2sdkee1.3\bin\j2ee
-verbose
J2EE server listen port: 1081
org.omg.CORBA.INTERNAL: minor code: 1398079697
completed: No
at
at
at
t
com.sun.corba.ee.internal.iiop.GIOPImpl.createListener(
IOPImpl.java:256)
at
at
at
t
com.sun.corba.ee.internal.iiop.GIOPImpl.getEndpoint(GIO
Impl.java:205)
at
at
at
t
com.sun.corba.ee.internal.iiop.GIOPImpl.initEndpoints(G
OPImpl.java:140)
at
at
at
t
com.sun.corba.ee.internal.POA.POAORB.getServerEndpoint(
OAORB.java:488)
at
at
at
t
com.sun.corba.ee.internal.POA.POAImpl.pre_initialize(PO
Impl.java:154)
at
at
at
t
com.sun.corba.ee.internal.POA.POAImpl.<init>(POAImpl.ja
a:112)
at
at
at
t
com.sun.corba.ee.internal.POA.POAORB.makeRootPOA(POAORB
java:110)
at
at
at
t
com.sun.corba.ee.internal.POA.POAORB$1.evaluate(POAORB.
ava:128)
at
at
at
t
com.sun.corba.ee.internal.core.Future.evaluate(Future.j
va:21)
at
at
at
t
com.sun.corba.ee.internal.corba.ORB.resolveInitialRefer
nce(ORB.java:2421)
at
at
at
t
com.sun.corba.ee.internal.corba.ORB.resolve_initial_ref
rences(ORB.java:2356)
at
at
at
t
com.sun.enterprise.server.J2EEServer.run(J2EEServer.jav
:193)
at
at
at
t
com.sun.enterprise.server.J2EEServer.main(J2EEServer.ja
a:913)
java.lang.RuntimeException: Unable to create ORB.
Possible causes include TCP/IP ports in use by another
process
at
at
at
t
com.sun.enterprise.server.J2EEServer.run(J2EEServer.jav
:203)
at
at
at
t
com.sun.enterprise.server.J2EEServer.main(J2EEServer.ja
a:913)
java.lang.RuntimeException: Unable to create ORB.
Possible causes include TCP/IP ports in use by another
process
at
at
at
t
com.sun.enterprise.server.J2EEServer.run(J2EEServer.jav
:203)
at
at
at
t
com.sun.enterprise.server.J2EEServer.main(J2EEServer.ja
a:913)
java.lang.RuntimeException: Unable to create ORB.
Possible causes include TCP/IP ports in use by another
process
at
at
at
t
com.sun.enterprise.server.J2EEServer.run(J2EEServer.jav
:350)
at
at
at
t
com.sun.enterprise.server.J2EEServer.main(J2EEServer.ja
a:913)
J2EE server reported the following error: Unable to
create ORB. Possible causes include TCP/IP ports in
use by another process
Error executing J2EE server ...

Starting SOA Suite server in debug mode

Hello,
anyone knows how to start soa suite server on debug mode?
it basically oc4j server started from opmn. is there anyway i can pass the "-ojvm -XXdebug,port4000,detached,quiet" to opmn?
Rudi

solved..!!!
http://download.oracle.com/docs/cd/B31017_01/web.1013/b28950/sysprops.htm#CHDCFADJ

Plz help error while starting j2ee server

I 'm working on Win xp professional operating system.
While starting the j2ee server from command line
with the command
j2ee -verbose
earlier it was working perfectly but from 2 days its not starting even...even i have reinstalled the j2ee software ....i think there is some internal problem which is not related to setting up the enviornment variables and incorrectly typing of command... plz help me as soon as possible.. i wil be thankful ....
I am getting error message as follows
C:\Documents and Settings\Sunita Khilnaney>j2ee
java.io.IOException: The system cannot find the path specified
at java.io.Win32FileSystem.createFileExclusively(Native Method)
at java.io.File.createNewFile(File.java:690)
at com.sun.enterprise.repository.ConfigurationImpl.getServerRepository(C
onfigurationImpl.java:92)
at com.sun.enterprise.repository.ConfigurationImpl.<init>(ConfigurationI
mpl.java:45)
at com.sun.enterprise.server.J2EEServer.run(J2EEServer.java:170)
at com.sun.enterprise.server.J2EEServer.main(J2EEServer.java:913)
J2EE server listen port: 1050
java.io.FileNotFoundException: C:\j2sdkee1.3\logs\compaq\j2ee\j2ee\system.out (T
he system cannot find the path specified)
at java.io.FileOutputStream.openAppend(Native Method)
at java.io.FileOutputStream.<init>(FileOutputStream.java:100)
at com.sun.enterprise.server.J2EEServer.redirectStreams(J2EEServer.java:
534)
at com.sun.enterprise.server.J2EEServer.run(J2EEServer.java:209)
at com.sun.enterprise.server.J2EEServer.main(J2EEServer.java:913)
java.io.FileNotFoundException: C:\j2sdkee1.3\logs\compaq\j2ee\j2ee\system.out (T
he system cannot find the path specified)
at java.io.FileOutputStream.openAppend(Native Method)
at java.io.FileOutputStream.<init>(FileOutputStream.java:100)
at com.sun.enterprise.server.J2EEServer.redirectStreams(J2EEServer.java:
534)
at com.sun.enterprise.server.J2EEServer.run(J2EEServer.java:209)
at com.sun.enterprise.server.J2EEServer.main(J2EEServer.java:913)
java.lang.RuntimeException: C:\j2sdkee1.3\logs\compaq\j2ee\j2ee\system.out (The
system cannot find the path specified)
at com.sun.enterprise.server.J2EEServer.run(J2EEServer.java:350)
at com.sun.enterprise.server.J2EEServer.main(J2EEServer.java:913)
J2EE server reported the following error: C:\j2sdkee1.3\logs\compaq\j2ee\j2ee\sy
stem.out (The system cannot find the path specified)
Error executing J2EE server ...
C:\Documents and Settings\Sunita Khilnaney>

Hello sunita,
do one thing put yoor j2ee server installation in a folder whose name doesn't contain space.
As you can see there ia a space btwn Documents & and. btwn Sunita & Khilnaney
C:\Documents and Settings\Sunita Khilnaney>j2ee
put it in folder like c:\SunitaKhilnaney>j2ee or c:\Sunita_Khilnaney>j2ee
I hope it'll solve your pblm.
Thanks,
Dinesh

Error at starting j2ee server (newbie)

Dear all,
I am not able to start j2ee server successfully. I keep getting the following error when I try to start the server by typing j2ee:
C:\Documents and Settings\ali>j2ee
J2EE server listen port: 1050
Redirecting the output and error streams to the following files:
C:\j2sdkee1.3.1\logs\nofear\j2ee\j2ee\system.out
C:\j2sdkee1.3.1\logs\nofear\j2ee\j2ee\system.err
Exception in thread "main"
I have j2sdkee1.3.1 and jdk1.3.0_05 installed in my laptop with the following settings:
User variable:
PATH=C:\jdk1.3.0_05\bin;C:\j2sdkee1.3.1\bin;C:\Program Files\Java\jre1.6.0_02\bin;C:\Program Files\Java\jdk1.6.0_02\bin; C:\j2sdkee1.3.1\bin;
CLASSPATH=.;C:\Program Files\Java\jre1.6.0_02\bin;C:\jdk1.3.0_05\bin;C:\j2sdkee1.3.1\bin;
System variable:
PATH=D:\MikTex\miktex\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\Program Files\Java\jdk1.6.0_02\bin;C:\PROGRA~1\CINDER~1\CINDER~2\Program;C:\Program Files\Java\jre1.6.0_02\bin;C:\PROGRA~1\ATT\Graphviz\bin\tools;C:\WINDOWS\system32\wbem;C:\Program Files\ImageConverter Plus;C:\Program Files\Samsung\Samsung PC Studio 3\;C:\Program Files\QuickTime\QTSystem\;C:\jdk1.3.0_05\bin;C:\j2sdkee1.3.1\bin;
CLASSPATH= .;C:\jdk1.3.0_05\bin;C:\Program Files\Java\jdk1.6.0_02\bin; C:\Program Files\Java\jre1.6.2_02\bin;C:\Program Files\Java\jdk1.6.0_02\bin;C:\Program Files\Java\jre1.6.0_05\lib\ext\QTJava.zip;C:\j2sdkee1.3.1\bin;C:\j2sdkee1.3.1;
Java_home= C:\jdk1.3.0_05
J2ee_home= C:\j2sdkee1.3.1
Could you please tell me why as I am not able to pass this stage without help?
Kind regards,
Al

Modify your JAVA_HOME to C:\Program%20%Files\j2sdk1.4.2_08
as spaces are not allowed. Most probably it will work.
I have installed J2EE SDK 1.3 on my machine. I have
set
J2EE_HOME=C:\j2sdkee1.3.1
JAVA_HOME=C:\Program Files\j2sdk1.4.2_08
and
PATH=C:\j2sdkee1.3.1\bin
CLASSPATH
=%J2EE_HOME%\lib\j2ee.jar;%J2EE_HOME%\lib\locale
environmental variables. All the four path seem to
OK. But when I'm trying to start application server
using j2ee -verbose command on my dos prompt I'm
getting following error
'C:\Program' is not recognized as an internal or
external command, operable program or batch file.
I tried j2ee -verbose command from C: prompt as well
as from C:\j2sdkee1.3.1\bin prompt in which j2ee
batch file is present.
Please help/guide on above issue

Error message while starting J2EE Server!

Hi!
I get this error message when i try to start J2EE server:
c:\j2ee -verbose
Exception in thread "main" java.lang.NoSuchMethodError
at com.sun.corba.ee.internal.corba.AnyImpl.createTypeCodeForClass(AnyImp
l.java:1256)
at com.sun.corba.ee.internal.iiop.ShutdownUtilDelegate.createTypeCode(Sh
utdownUtilDelegate.java:223)
at com.sun.corba.ee.internal.iiop.ShutdownUtilDelegate.writeAny(Shutdown
UtilDelegate.java:178)
at javax.rmi.CORBA.Util.writeAny(Util.java:80)
at org.omg.stub.com.sun.enterprise.naming._SerialContextProvider_Stub.re
bind(Unknown Source)
at com.sun.enterprise.naming.SerialContext.rebind(SerialContext.java:188
at com.sun.enterprise.naming.SerialContext.rebind(SerialContext.java:202
at javax.naming.InitialContext.rebind(InitialContext.java:370)
at com.sun.enterprise.naming.NamingManagerImpl.publishObject(NamingManag
erImpl.java:192)
at com.sun.enterprise.naming.NamingManagerImpl.publishObject(NamingManag
erImpl.java:149)
at com.sun.enterprise.server.J2EEServer.bindObject(J2EEServer.java:718)
at com.sun.enterprise.server.J2EEServer.createServerObject(J2EEServer.ja
va:473)
at com.sun.enterprise.server.J2EEServer.run(J2EEServer.java:244)
at com.sun.enterprise.server.J2EEServer.main(J2EEServer.java:972)
Can someone tell me why?
Thanks

You need jsdk 1.3.1_03 or above to run j2ee 1.3.1 Any other version will give you this error.

SOS!!!starting j2EE server error

Hi,everyone.
I'm using Sun J2EE Server 1.3.1.I met a trouble with it.Now,when i try to start it,it will appear many error message:
J2EE server listen port: 1050
java.lang.RuntimeException: Could not initialize j2ee server. Possible cause cou
ld be another instance of the server already running.
at com.sun.enterprise.iiop.POAProtocolMgr.initializeNaming(POAProtocolMg
r.java:119)
at com.sun.enterprise.server.J2EEServer.run(J2EEServer.java:226)
at com.sun.enterprise.server.J2EEServer.main(J2EEServer.java:972)
java.lang.RuntimeException: Could not initialize j2ee server. Possible cause cou
ld be another instance of the server already running.
at com.sun.enterprise.iiop.POAProtocolMgr.initializeNaming(POAProtocolMg
r.java:119)
at com.sun.enterprise.server.J2EEServer.run(J2EEServer.java:226)
at com.sun.enterprise.server.J2EEServer.main(J2EEServer.java:972)
java.lang.RuntimeException: Could not initialize j2ee server. Possible cause cou
ld be another instance of the server already running.
at com.sun.enterprise.server.J2EEServer.run(J2EEServer.java:346)
at com.sun.enterprise.server.J2EEServer.main(J2EEServer.java:972)
J2EE server reported the following error: Could not initialize j2ee server. Poss
ible cause could be another instance of the server already running.
Error executing J2EE server ...
I donno why.Plz help me.
Regards,
Albert Lee

Solution to Problem: ANother JNDI service is running on the port 1050. It may be Websphere Application server, Weblogic, Websphere test env. or any other service. Stop if any of these service is running and restart your m/c. If still it doesn't work then change the port no. in orb.properties file in J2EEHOME\config.

Error starting HTTP-Server: Address in use: JVM_Bind

I installed J2ee version of Oracle9iAS R2 for windows. When I start my application server, I always get the error "Error starting HTTP-Server: Address in use: JVM_Bind". In the previous version, if I met this message, I can change the port number in "http-web-site.xml", but now, no matter what port number I changed, I always get this error message.
Could anybody please help me with this issue?
Can Oracle provides a tool that can automatically free the port?
Thanks, Jessie

If you are getting this error while starting the Oracle9iAS by using the NT services or using command line (dcmctl) then there is a port conflict for the HTTP Server. You can go the EM Website and select HTTP Server ->Server properties and select the port# for the HTTP Server.
OC4J is configured to listen for AJP requests only and the ports are dynamically assigned. The port ranges can be specified : OC4J Instance -> Server Properties
regards
Debu Panda
Oracle

Error starting J2EE server in debug mode

Similar Messages

Maybe you are looking for