Built-in audio cannot be found?

Hi All,
I just bought a MacBook Pro and installed FCE, which I had stopped using for a while because my old iMac G5 was so slow. When I start FCP it gives me an error message that the built-in audio device cannot be found. I opened an old project and it seems the sound plays OK, but still that message is annoying and a bit worrying... any idea?
Thanks
Florence
Edited to changed FCP to FCE, sorry for the confusion.

You should ask your question on the Final Cut pro forum.

Similar Messages

Looking for a reading App. iPad (iOS 7.1.2) - Kindle. I am looking for a good app that can help a college student with reading books that cannot be found on audio book. Voice over works, but monotone!

Looking for a reading App.
iPad (iOS 7.1.2) - Kindle.
I am looking for a good app that can help a college student with reading books that cannot be found on audio book. I have tried voice over and it works but it's very monotone and it really strings things together.
- I'm willing to pay for a good app but I can't seem to sort though the many that are out there. Any suggestions.

Ah. I'm surprised, but there we go.
Have a look here ...
http://jam.hitsquad.com/vocal/about2136.html
(courtesy of googling 'OSX free multitrack recording software')
Didn't have time to do more than skim, but 'Ardour' looked promising. Protools is the only one I've used, the full product is one of the industry standards, but the free 'lite' version listed here seems to be limited to 2 in/out as well.
Referring to your original post, I'd think trying to write or 'script' something would be a nightmare ... synchronisation of streams within something like Applescript would be a major issue, quite apart from anything else.
G5 Dual 2.7, MacMini, iMac 700; P4/XP Desk & Lap. Mac OS X (10.4.8) mLan:01x/i88x; DP 5.1, Cubase SX3, NI Komplete, Melodyne.

Audio Card cannot be found

Audio Card cannot be foundi I just realized that I have lost all audio. I could use some help trouble shooting the issue. I have a Dell Dimension 900 w/ a Creative SB Audigy 2 ZS audio card. I run Vista Home Premium w/ SP2. There have been no recent hardware or software additions (or removal) . I run "Creative Diagnostics" and receive a message that the audio card cannot be found on the system. Device Manager indicates the device is working properly. Media Player displays and displays visualization. Volume Mixer displays sound. I have reset the audio card on the mother board I have reset the speaker connections. I have checked speaker with a second source I have checked and set speaker volume. Power to speakers is on. Speakers are not in "mute" mode. I have verified that I am using the most current driver for the audio card (no change from exisiting driver).

I uninstalled the device through device manager and then reiinstalled the driver - same symptoms.

In-built Audio device not found

Hi Guys,
My macbook pro suddenly finds no audio device inbuilt. And i can play no sound nor hear start up sound when switching on mac.
I get a 'no parking' like symbol beneath my audio options.
I've tried rebooting in safe mode, Resetting PRAM, Repairing permissions in disk utilities, use my ipod touch headsets, headphones.. NOthing worked.
And i'm feeling deaf whenever using Mac now.
Is there anyway to get the audio back ?
Thanks,
Raesh

Hmm.. Okay. Would give it a last try.
And I have a couple question before doing that..
1. I did the hardware test and It gave me this error .. " 4SNS/1/C0000008 :TPCD--24 "
But When i looked up for this error, it tells me a sensor problem. Not as Audio device problem. Do you think this hardware error of 'sensor' has something to do with audio ?
2. So in-built speaker isn't working, plugging in headphones cable isn't working. But i was wondering whether a bluetooth speaker would be recoganised in the system preferences > audio output device ? Will it work ?
Because i keep on reading that an " in-built audio device not found " problem is a huge one and it costs a lot to repair. They often provide solution of changing the whole logic board (Keeping fingers crossed). And with my warranty period over, I don't wish to go through that path. So want to know if external bluetooth speaker has a chance to get recoganised as an audio device, Then I would buy JBL bluetooth speakers. It seems good and less pricey than changing the whole logic board.
Let me know which way i can go, Thanks in Advance Man.
// Raesh.S

Cannot import audio CD, but can play! error: required disk cannot be found

cannot import audio CD, but can play! When I try to import it appears an error: required disk cannot be found!
Does someone knows a solution?

There is no such thing as a "parser plug-in".
That's not entirely accurate. In CS4 we use "EPS Parser.8BY" to assist in parsing of illustrator files. This plugin is normally located at:
"C:\Program Files (x86)\Adobe\Adobe After Effects CS4\Support Files\Plug-ins\Format\EPS Parser.8BY"
Is this missing for some reason?
--chris

An audio recording device cannot be found

Please help. I have a Toshiba satellite. My mic was working two days ago on the sound recorder. Now when I go to use it it tells me "an audio recording device cannot be found" It then takes me to the "Sound" section, I go to "Recording" and it tells me no audio device has been installed. Really? Someone please help. Thanks!

Hi,
Can you post back with the full Model No. and Product No. of your g6 series notebook ( from the service tag underneath your notebook ) - see Here for a further explanation.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Built-In Audio disappears from Audio/MIDI

I'm trying to edit a project in Logic (7), get a warning message that my previously used audio device cannot be found, Logic continues to load and finishes at the arrange window as normal. When I go into Audio Prefs in Logic, there are NO sound cards listed to choose from.
Now as to why I'm posting here and not the Logic board: Back into Audio MIDI Setup window, Default Input is grayed out and says "None". Same with "Properties For:" drop-down. The space under Audio Input and Audio Output at the bottom of the window says "Input is not supported" and "Output is not supported".
So then into System Profiler, it DOES list the Audio (Built-In) with a Texas Instruments TAS3004.
I've tried a few reboots and, past that, I really don't even know where to begin. Any thoughts? Thanks in advance!

Hi Cam
Did you try to reset [PRAM|http://support.apple.com/kb/HT1379?viewlocale=en_US] and [PMU|http://support.apple.com/kb/HT1431?viewlocale=en_US]?
Hope that helps P

Macbook Air Mid 2013 No Built-In Audio

Hey everyone,
I have an issue with my friends Macbook Air (Mid 2013 Model). After listening to some music through his speakers, he unplugged his Aux cable and then plugged them back in to find that he didnt have built in output or input anymore. I have tried all of the following to fix it:
Reinstall OS X 10.8
Run all of the Automation tools found in the application Onyx
Reinstall certain .kext files (AppleHDA and AudioAUUC)
Repair permissions
Re-seat the speakers in the device itself
Reset coreaudio
Resetting SMC, PRAM, and NVRAM
Clear and re-build kernal cache
Cleaned the headphone jack
Plugged in an audio interface
Reloaded from Time Machine Backup
etc...
I've literally tried almost everything in the book. The only other thing i can think of is installing a copy of Mavericks when it comes out (In October i believe). There is no boot up chime, and after running the OS in verbose mode, i can see that AudioAUUC.kext is not being loaded. Built in audio does not appear is system profiler. What can i do to fix this problem? Could it really be a hardware issue? If so, what can i do to fix it?

Test after each step.
1. Applications > Utilities > Audio MIDI Setup
    Audio Devices window
    Side Bar
    Click the Built-in Output.
    Under Mute any of the boxes checked? If so, uncheck it.
    Option click the speaker icon, if present and select Internal Speakers.
2. Plug in the head phone and reset SMC.

10.4.6 and Active Directory Problem - Volume cannot be found??

I have bound six 10.4.6 to active directory. All went sweet with no problems. I have "force local home folder" off in Directory Access for AD. I can login to the Mac no problem using any user account from AD. If I login with a user the first time all goes well. The desktop icons show and the home directory is that of the users network home folder and can browse it. All good until I log out and login again. I get the desktop icons but the users home directory give the error "The Volume for %username% Cannot be found" when trying to access. I can browse the network to the user home folder without having to authenticate. The server (2003) shows no login errors, all looks fine. I have upgraded one Mac to 10.4.7 but made no differnce.
I have installed "services for Mac and Appletalk" on the server but from what I have been told this shouldn't need to be installed but I did as I was getting no where anyway.
Any ideas?
PowerPC Mac OS X (10.4.6)

Hi Chris!
Before I comment, I want to define a couple of things. A "Mac home folder" stores a user's files (Documents, Library, etc.). This home folder can be stored locally on the workstation or it can be stored on a server. A "Windows home folder" is defined in a user's Active Directory account and can be used as the Mac home folder or simply as a network user folder for storage.
While the idea of a network-based Mac home folder is nice, it can be clunky simply because the entire user experience is dependent on network speed and/or good file synchronization between your server and workstation. As someone who works in a group supporting about 300 Macs, I suggest enabling local home folders and not using a network-based Mac home folder.
Next, File Services for Macintosh (AFP protocol) built into Windows Server will not support network-based Mac home folders. This is a dead end. You can install a third party product from Group Logic called ExtremeZ-IP, which does support network-based home folders over AFP.
Therefore, what's happening in your network is that the network-based Mac home folders are being mounted via the SMB protocol, which uses Windows style file sharing. SMB in Mac OS X is good for limited use but I wouldn't recommend it for extensive use, which would include network-based Mac home folders.
Here's what I suggest for your AD settings: 1.) Enable local home folders. 2.) Connect via SMB. This will keep your users' Mac home folders local to the machine but if their Windows network home folder is properly defined in their AD account settings then these should automatically mount on the Desktop via SMB at login.
If you can get your Windows home folders to mount automtically on the users' Desktops then you can experiment with synchronization. After logging in, each user can visit Apple menu --> System Preferences... --> Accounts and the synchronization options will be available. A user can synchronize all or part of his local Mac home folder to his mounted Windows home folder.
Hope this helps! bill
1 GHz Powerbook G4 Mac OS X (10.4.7)

Package load Failed! Invalid package Title, manifest file cannot be found

Greetings. I am new to UPK and am seeking guidance on an upgrade to 11.1.
A little background on what we are trying to do:
We have two machines:
Windows 2003 machine in domain 'X' | UPK 11.0.0.1.
Windows 2008 R2 virtual machine in domain 'Y' | UPK 11.0 on the new machine first, install the 11.0.0.1 patch, and then upgrade to 11.1.
We are using the same database as the old machine. Developer Server is Standard Authentication, Knowledge Center is Windows authentication.
==========================================================================================
So far we have installed 11.1 with the respective database upgrades, but are lost as to how to migrate the old Content Root data. We have copied all the content to the new Content Root, added it to IIS like the old machine, and verified that the UPK database Content Root path is correct and working.
For the rest of the post, I am remoted into the server from my local workstation, and then using IE to access KCenter on the server's FQDN, not via localhost.
Since I am green, so I presumed that I would need to import the titles under Manager in KCenter. I zipped each content folder individually (they are named "1", "9", etc), and then attempted to import each zip file.
NOTE: At this stage sometimes we are prompted to authenticate again. When it does, sometimes the credentials that we know work, get rejected and we are prompted again. This will repeat until we get a 401 and we have to start over. We have verified that the Windows account currently in session with the site is valid and has administrator authority within KC.
NOTE2: On the first few tries, .NET complained that maxRequestLength was not large enough. I had our servers team increase it on the actual server in order for us to proceed.
Provided we don't have to authenticate again, or that it actually accepts our credentials, we get to the 30% mark and then receive the error: *"Package load Failed! Invalid package Title, manifest file cannot be found"*
Does anyone have any wisdom for this process? The title importation section in the deployment manual is not helping, and the administrator from whom I am taking over this software has not had to deal with this before.
Thank you,
Ian
Edited by: 986290 on Feb 5, 2013 10:21 AM

Hi Marc, thanks for the post,
I have gone through an extensive troubleshooting process with Oracle, including their development team, in order to fully complete our project setup. As a supplemental bit of information, we also were having connection errors when attempting to publish directly to the knowledge center.
As far as the context of this post, here is the solution in brief:
1) Verify that the package being imported was published from the same version of the Developer Client as the Knowledge Center installation's.
2) Check for database consistency issues. In our case we were using a database that was built in another domain. After numerous attempts with Oracle support on the line to determine the inconsistency, it was decided to completely reinstall and build a new database from scratch in the new domain.
3) Check application pool identities and access (while we had some inconsistencies here, correcting them did not change the behavior of the import/publish errors)
In review, a lot of what we had setup was correct. Our primary point of failure, we feel, was using the old database. Technically this should not have been a problem, but Murphy likes to get his way sometimes.
Cheers,
Ian

While viewing a page I suden get "Oops! This page appears broken. DNS Error - Server cannot be found." However I can back arrow to the page

I just upgrade to versions 18.0.1. I am suing Window 7 64 bit.
Now I while I am viewing a page I suddenly receive the error massage "Oops! This page appears broken. DNS Error - Server cannot be found."
I can use the back arrow key to bring the paper back.
If I have several tabs open, I can watch one tab after another change from the page name, It doesn't seem to matter who page it is, Yahoo, Washington Post, NBCNews,

I am not a techie. I keep 15-20 to tabs open at a time for reference while working. When I upgraded to this version, all my tabs were closed and my history was erased. I still have not recovered from that loss. I do not want to have this repeated!
If I was using pdfforge extension (what ever that is) before the upgrade, why is it venomous now?
Besides this issue, since upgrading I suddenly starting having the audio from commercials being played from tabs that are not active (open). I now have to leave my audio muted.
I expected assistance from Firefox not some unknown individual ( iamjayakumars) who for all I know is a troll trying to get me to do something to expose my computer to attack.
I allowed Firefox to collect data they needed from my computer when I submitted the question.
Fix the bug in your program! I have used Firefox since it came out. I am within a hairs width of switching browser. The only thing holding me with Firefox is my bookmarks. If I figure out how to export them, I am gone.
FIX YOUR BROWSER!!!

IPod cannot be synced. The required file cannot be found - Aggghh!!!!

I have a new iTouch, which is fine, I am just having a very, very bad experience of iTunes., in fact so bad it may go back to apple soon and I shall dust off my old Creative Zen
The Problem:
When I try to sync any music, audio book or photos, the message comes up:
" iPod cannot be synced. The required file cannot be found" and nothing is synced,
It syncs my contacts and calendar from Office Outlook fine, and the alarm works on the appointments.
I think I have tried just about everything, I have uninstalled and reinstalled iTunes, done the whole Restore option in ITunes.. run the Diagnostics and all passes fine. I have searched the form and found another answer mentioning security issues, but mine have not changed. It is not the compatibility of photos or DRM with the music, I have tried a single music file (of my own song) and a single compatible photo.
Googled the darn problem and there seem to be as many differing views on the problem as there are computers out there, from my hard drive being screwed (which it is not) to a registry file missing.. Tried all but…..
Well if anyone can come up with an answer they can expect a very large thank you!!!
Any answers?
Thanks
Stewart

Do you sync photos to your device?
B-rock

"Your Time Machine back up disk cannot be found." What does this mean?

I have an external hard drive that has never been disconnected from my iMac.
About 3 weeks ago, I started noticing that some of my iTunes library songs had "!" in front of them, and I wasn't able to find them to play. Over time, more and more iTunes songs had this problem. Someone recommended that I look in the hard drive library, for individual titles, and sure enough, there they were! I've been dragging them back to iTunes but this is going to take forever, because I'm a music teacher and I have a lot of songs in my library.
In this process, I decided to see if the songs were still on the external hard drive, the Time Machine. However, I get the message "your time machine back up disk cannot be found." I have no idea what this must mean, because the Time Machine has been plugged in for a couple of years now. But somehow, the computer doesn't recognize it any more.
Are the two problems related? And what should I do?

There is no relation.
Time Machine backups : my opinion is that this is a real waste of disk space, usefull for a few number of files but that's all ! In case of a reinstallation, everyone is performing a fresh installation ... In addition, after a certain time, TM erases the oldest files.
I personnaly backup only on mediums (CDs, DVDs, DVDs) etc ... then i'm always sure to find again what i'm searching for.
iTunes : a "!" means that you have moved from one place to another an audio file (or erasing it by error) and iTunes has just stored a link to the file and not the file inside its own folders. Probably you have never consolidated you library. The question is : where are you storing your files ? inside your mac plus inside external drives ? Please make sure, if you are managing often files in iTunes, to consolidate them in order for iTunes to copy them inside its own folders, else it becomes quickly a nightmare.
iTunes manages files on 3 different ways now :
- real files inside it
- links to files out of its folders
- files from iTunesMatch

Time Capsule Backup Disk Cannot Be Found

Hello,
I have a fairly new iMac (about 3 months old) running Lion OSX 10.7.4. This is my first Mac Computer. I have it setup wirelessly to a time capsule and had time machine backup. All was running fine until today when I noticed my last successful backup was June 18th. Ive spent several hour reading in apple support communities and other websites and I can't figure out what happened. I have kept all my software up to date.
All my other Apple devices are working fine on the same network: 2 Airport Expresses for Airplay, iPad, iPhone, iMac. . . I just can't get time machine to backup.
My error message is "Backup Disk Cannot be Found"
HELP!

Mac with Lion is about vista standard as far as networking goes.. did you turn it off and on again??
Turn off the whole network.. off not sleep.. reboot in the right order.. modem.. router.. TC if different to router.. then clients.. I think the TC should reappear.. if not connect to it by ethernet.. do not use extended wireless.. it is too flakey.
If it still doesn't appear press reset and do the setup again.
For lion make sure you download, install and use the tool utility.. not the toy utilty built into windows lion.
http://support.apple.com/kb/DL1482
Tell me if the hard disk appears.. if so you know the procedure the next time.. in a few days when it happens again. It will happen again btw.. it is windows.. lion

Time Capsule internal disk "cannot be found"

Yesterday I stopped being able to connect to my Time Capsule's shared disk; I see my Time Capsule in Finder but when I double-click on the disk folder, it says "The operation cannot be completed because the original item for 'Storage' cannot be found." I've tried installing all software updates, restarting my computer (Mac mini), resetting the Time Capsule, and tried every different file sharing setting, all without any difference. I'm thinking it may be related to the recent software update for .Mac>MobileMe because I noticed there are new icons for this in Finder the same time the Time Capsule disk stopped working.

Mac with Lion is about vista standard as far as networking goes.. did you turn it off and on again??
Turn off the whole network.. off not sleep.. reboot in the right order.. modem.. router.. TC if different to router.. then clients.. I think the TC should reappear.. if not connect to it by ethernet.. do not use extended wireless.. it is too flakey.
If it still doesn't appear press reset and do the setup again.
For lion make sure you download, install and use the tool utility.. not the toy utilty built into windows lion.
http://support.apple.com/kb/DL1482
Tell me if the hard disk appears.. if so you know the procedure the next time.. in a few days when it happens again. It will happen again btw.. it is windows.. lion

Built-in audio cannot be found?

Similar Messages

Maybe you are looking for