Buisness Content link .plz for FI-SL, COPA, SD,CRM

Hi ,
Can any send link for business content?
pavan

hi Pavan,
for sap source system, we have first to install the plug-in PI_BASIS,
check various extraction from different source system
http://help.sap.com/saphelp_nw04s/helpdata/en/e9/6bf2d90e533f409ee56d3f586c325a/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/28/4c553c42360a40e10000000a114084/frameset.htm
and different module has different things to be taken care, specific document/oss notes, search in sdn library or service.sap.com/bi
which module will you go first ?
yes, bwom in FI, you can check following doc (or some oss note)
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a7f2f294-0501-0010-11bb-80e0d67c3e4a
hope this helps.
co-pa
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/fb07ab90-0201-0010-c489-d527d39cc0c6
http://help.sap.com/saphelp_nw04s/helpdata/en/53/c1143c26b8bc00e10000000a114084/frameset.htm

Similar Messages

Remove Site Contents link

Hi..
How to remove Site Contents link only for read users.
Ravindranath

Hi Ravindranath,
You will have to update the master page and update the permissionString to hide it for users who just have read permissions
<SharePoint:MenuItemTemplate runat="server" id="MenuItem_ViewAllSiteContents"
         Text="<%$Resources:wss,quiklnch_allcontent_15%>"
         Description="<%$Resources:wss,siteactions_allcontentdescription%>"
         ImageUrl="/_layouts/15/images/allcontent32.png?rev=38"
         MenuGroupId="200"
         Sequence="240"
         UseShortId="true"
         ClientOnClickNavigateUrl="~siteLayouts/viewlsts.aspx"
         PermissionsString="ViewFormPages"
         PermissionMode="Any" />
Regards, Partha Avepoint Please mark the response as "Answer" if it answers your response If this response takes you closer to your solution mark it as a "helpful post"

Content Query Webpart For Slider

I'm trying to create a simple jquery slider with the help of Content Query Webpart in sharepoint 2013. Can anyone help me on this with a simple video or example like how I can achieve this.

Hi Sreejith,
To display the search results as a slider in Content Query web part(CQWP), we can upload the
JQuery plugin to SharePoint and create a Custom ContentQueryMain.xsl and ItemStyle.xsl to render the results.
Here are some examples about the detailed steps for integrating a Slider with the Content Query Web Part in the links below for your reference(same for SharePoint 2013):
http://www.nothingbutsharepoint.com/2012/06/18/sharepoint-integrate-a-slider-with-the-content-query-web-part-part-1-what-does-my-slider-need-to-work-aspx/
http://www.nothingbutsharepoint.com/2012/07/10/sharepoint-integrating-a-slider-with-the-content-query-web-part-part-2-setting-up-my-content-source-aspx/
http://www.nothingbutsharepoint.com/2012/08/27/sharepoint-integrate-a-slider-with-the-content-query-web-part-part-3-integration-with-the-cqwp-aspx/
https://www.pena.id/2014/08/adding-slider-sharepoint-using-content-query-web-part-cqwp/
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Adding annotations throws off Table of Contents links

I asked this a month ago and got no responses...Help is critically needed. When annotations are added, the bookmarks seem OK on authoring machine, but once PDF is opened on another machine, everything thrown off!
I'm involved in a paperless pilot project and am having a difficult time circumventing an issue in Preview.
I'm re-formatting material for executive meetings from WordPerfect, Word, Excel and PowerPoint into bookmarked PDF format in Adobe Acrobat Pro X. When they are opened in Preview by senior management on MacBook Airs, the Table of Contents links everywhere correctly. However, the moment they add an annotation (in this case, notes), the table of contents is thrown one page off, regardless of their place in the document. Even after removing the note, the table of contents does not revert to the proper place. I'm assuming this occurs because the annotation throws off the markers from the imported bookmarks.
Using Acrobat Reader on the Airs isn't an option since annotations aren't possible. We are also really trying to keep production of the PDFs limited to Acrobat Pro to ensure cross-platform compatibility of the Table of Contents.
Has anyone else encountered these issues? Is there a potential workaround?

A lightweight alternative to Acrobat Pro for creating table of contents for any PDF is PDFOutliner (only $5 on Mac App Store.) The TOC links generated by PDFOutliner don't have the problem you've described above. You could open your PDF in PDFOutliner and re-save it (the TOC will be rebuilt) for a quick test.
Note: I'm the developer of PDFOutliner.
Regards,
Jose

Skip to content link/hyperlink to a region in a page

Hi All,
I want to make a "skip to content" link that will bring user to the content region when clicked. I make this link in a HTML portlet, but I don't know what value to put in the href attribute to make it pointing to the target region in a page ?
Thank you for your help.
Jeffry

You can try something like this:
<SCRIPT LANGUAGE="JavaScript">

</SCRIPT>
<a name="portletId" href="#" onClick="doSomething(this)">click this</a>

Content Server config for production system - oac0

Hi all
We are setting up content server for our ERP 2005 system, and I am wondering what best practice is for our scenario.
We have one content server (CST) for development and test systems on host A, and one content server (CSP) for production system on host B. The Archive link configuration in dev and test points to CST. When this is transported to production, it will point to the wrong content server and I will have to reconfigure the archivelink in production to point to the correct content server (CSP).
What is the best way to set up the production system to point to the content server CSP on host B? Should I define a new content repository in t-code oac0 in dev, and transport this to production? Should I define the new repository directly in production system??
Please advise.
Best Regards,
Thomas

Hello,
I had the same problem a few years ago with R/3 4.7.
I don't think there is a perfect solution but here is what I did :
In the DEV system, in OAC0, I created 2 content repositories, one for the test sytem and one for the production. I transported these 2 content repositories in the production system.
In the DEV system, in OAC3, I created temporary links from my business objects to my production content repository. I released the request order.
Then I deleted these links which are wrong in the DEV system. I transported the order in the R/3 production system where these links are right.
In the DEV system, in OAC3, I then created the links from my business objects to my TEST content repository. I released the second request order.
So my config is now OK in my test and my production system.
When we refresh the DEV system by a database copy from the production system. We just have to reimport the test request order to switch the links to be OK on the DEV system. We don't have to recreate the test content repository as it was defined als oi nthe production system.
I am not sure that this is clear but this works for us with no problems since 2002.
I hope this helps.
Olivier

Contents Links not working in ADE 2.0

Hi,
In ADE 2.0, links in the document are going to the wrong page. How can this be fixed?
In the original PDF and on ADE 1.7.2, these table of contents links work correctly. Now, the links go to the page before the correct page.
Any advice would be much appreciated!!
Thanks,
RanaJ

Yet another bug in ADE2.0/2.0.1. I suggest (as I so often do) reinstalling 1.7.2.
~~~~~~~~~
There are lots of bugs in ADE2.0 (and 2.0.1). Try replacing ADE2.0 with the older but more reliable v1.7.2.
(You can have them both installed at once if you like.)
Version 1.7.2, it is a little difficult to find, available on Adobe site for Windows and for Mac.
http://helpx.adobe.com/digital-editions/kb/cant-install-digital-editions.html
The forum software is sometimes corrupting the link above. There shouldn't be a blank in 'editio ns.html'. The following redirects to the same page: http://tinyurl.com/diged172
Some people have found ADE trying to upgrade automatically.
It appears (not 100% sure) that if you install ADE2.0 as a new install (not as an upgrade) that your 1.7.2 will continue to run.
Probably best to say no if 2.0.x installation asks if you want to migrate your library.

Dashboard Builder - sequencing the load order of content linked swfs?

Hi,
I don't think this is possible but wanted to throw it out there and see if anybody has some cunning tips on this subject...
We have an InfoView Dashboard that houses 5 Xcelsius modules (swfs). There is a Header Sidebar (swf) that initialises and passes parms to 4 chart modules (swfs) using content linking. Everything works fine and as the selections in the header change, new parms are sent to the swfs which in turn change correctly.
The issue we have is that the business would like everything to initialise with a starting view that contains data. This is not currently done because we cannot guarantee the order that the swfs load in and the 4 chart modules are dependant on the header. The user has to press refresh at the start to trigger the experience once the header has fully loaded.
I'm going to play around with it and will report back with my findings but if anybody has a technique for ensuring child modules are loaded automatically on load AFTER the parent module has gotten its data back and passed the content linked parms, please let me know. Or if there is a way to order (or daisychain) the loading of modules please share this.
Cheers,
Lee

Hi Tracy thanks for your replies. I found somebody to help me on getacoder.com - this code works perfectly.
The flex code:
<mx:Script>
<![CDATA[
public function FromSwf1(value:String):void
swfLoader.source = value;
public function FromSwf2(value:String):void
swfTeacher.source = value;
]]>
</mx:Script>
The AS3 code:
var flexApp = root.parent.parent['parentApplication'];
btn1.addEventListener(MouseEvent.CLICK, CallFlexFunction);
//stage.addEventListener(KeyboardEvent.KEY_DOWN, reportKeyDown);
function CallFlexFunction(e:MouseEvent) {
flexApp.FromSwf1("assets/ninos/alphabet.swf");
btn2.addEventListener(MouseEvent.CLICK, CallFlexFunction2);
//stage.addEventListener(KeyboardEvent.KEY_DOWN, reportKeyDown);
function CallFlexFunction2(e:MouseEvent) {
flexApp.FromSwf2("assets/ninos/clase_de_ninos.swf");

Standard Business Content & Data Targets for Case Management & CRM Survey

Dear Friends,
We are implementing CRM2007 with BW3.5 for reports for CRM Analytics. We require to Identify the Standard Data Targets & Standard Business Content (Reports) available for the following:
1. Case Management
2. CRM Survey (We have already been able to identify Data targets in BW3.5 for Web Survey & in CRM 2007 we have been able to identify Data targets for CRM Survey, as well as Web Survey. Our requirement is identifying Data Target for CRM Survey)
Please guide.
Regards,
Rajesh Banka

hi,
You can find the planning scenarios related to planning ifor CRM at this link http://help.sap.com/SAPHELP_SEM350BW/helpdata/EN/05/242537cedf2056e10000009b38f936/frameset.htm
You can also find the details on demo content for the same at http://help.sap.com/SAPHELP_SEM350BW/helpdata/EN/05/242537cedf2056e10000009b38f936/frameset.htm
Regards,
Deepti

How can i use Bi-Technical Content is used for measuring the performance of

Hi
recenetly i implemented the BI7.0 for one client. I want to know how to use 'BI Administraction Cockpit,.
Actual what technical content does ???
And how can i use technical content or statistics for measuring the performance of my queries. Please let me know
kumar

Hi Ravi,
BI Admin Cockpit is enhancement of BW Statistics.
http://help.sap.com/saphelp_nw2004s/helpdata/en/44/08a75d19e32d2fe10000000a11466f/frameset.htm
Check this thread also:
BI Statistics comparision with the old
Regarding the performance check the link below.
Re: Query - Performance
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/15c54048035a39e10000000a422035/frameset.htm
Regards,
Anil

WHAT IS THE USE OF COPY/MATCH OPTION IN BUISNESS CONTENT

WHAT IS THE USE OF COPY/MATCH OPTION IN BUISNESS CONTENT GIVE DETAILS

Hi,
Match (X) or Copy
If the SAP delivery version and the active version can be matched, a checkbox is displayed in this column.
With the most important object types, the active version and the SAP delivery version can be matched.
From a technical point of view, the SAP delivery version (D version) is matched with the M version. As in most cases the M version is identical to the active version (A version) in a customer system, this is referred to as a match between the D and A versions for reasons of simplification.
When a match is performed, particular properties of the object are compared in the A version and the D version. First it has to be decided whether these properties can be matched automatically or whether this has to be done manually. A match can be performed automatically for properties if you can be sure that the object is to be used in the same way as before it was transferred from Business Content. When performing matches manually you have to decide whether the characteristics of a property from the active version are to be retained, or whether the characteristics are to be transferred from the delivery version.
Example of an automatic match
Additional customer-specific attributes have been added to an InfoObject in the A version. In the D version, two additional attributes have been delivered by SAP that do not contain the customer-specific attributes. In order to be able to use the additional attributes, the delivery version has to be installed from Business Content again. At the same time, the customer-specific attributes are to be retained. In this case, you have to set the indicator (X) in the checkbox. After installing the Business Content, the additional attributes are available and the customer-specific enhancements have been retained automatically. However, if you have not checked the match field, the customer-specific enhancements in the A version are lost.
Example of a manual match
An InfoObject has a different text in the A version than in the D version. In this case the two versions have to be matched manually. When Business Content is installed, a details screen appears which asks you to specify whether the text should be transferred from the active version or from the D version.
The Match indicator is set as default in order to prevent the customer version being unintentionally overwritten. If the Content of the SAP delivery version is to be matched to the active version, you have to set the Install indicator separately.
The active version is overwritten with the delivery version if
¡        the match indicator is not set and
¡        the install indicator is set.
In other words, the delivery version is copied to the active version.
If the Install indicator is not set, the object is not copied or matched. In this case, the Match indicator has no effect.
In the context menu, two options are available:
                            a.      Merge All Below
The object in the selected hierarchy level and all objects in the lower levels of the hierarchy are selected as to Match.
                            b.      Copy All Below
The Match indicators are removed for the object in the selected hierarchy level and all objects in the lower levels of the hierarchy. If the Install indicator is also set, these objects are copied from the delivery version to the active version.
The most important properties which are taken into account when versions are matched are now listed.
When referring to InfoObjects it is important to differentiate between:
§         Characteristics
§         Time characteristics
§         Key figures and
§         Units
Valid for All InfoObjects Named Above:
Properties Matched Automatically:
Properties Matched Manually:
·        Texts
·        Description
If texts/descriptions in the delivery version do not yet exist in the active version, they are transferred.
·        Attribute only (flag)
·        Short and long text (description)
·        Time dependency of attributes
·        Transfer routine
Valid for Characteristics
Properties Matched Automatically:
Properties Matched Manually:
·        Compounding
New InfoObjects are included in compounding
·        Referenced characteristic
Reference characteristics are transferred automatically. A warning is issued.
·        Attributes / navigation attributes
New attributes are included.
If an attribute is added by the customer, the settings for this attribute are transferred (for example, F4 sequence).
·        Application components
If the entry for the active version is initial, the delivery version is used.
·        BEx display
·        Characteristic constants
·        Default member
·        Authorizations (flag and field)
·        Selection (CHASEL)
·        InfoObject is document attribute
·        Data type
·        Length
·        Output length
·        Conversion routines
·        Lower case allowed (flag)
·        Contains master data (flag)
·        Master data is authorization relevant (flag)
·        Export DataSource (Flag)
·        F4 query design
·        F4 query runtime
·        Check ODS object
·        Contains text tables (flag)
·        Texts are language-dependent (flag)
·        Short, medium and long texts exist (each with flag)
·        Default currency
·        GIS attribute
·        Hierarchies exist (flag)
Valid for Key Figures
Properties Matched Automatically:
Properties Matched Manually:
·        Type of key figure
·        Fixed unit
·        Fixed currency
·        Aggregation
·        Exception aggregation
Valid for Units
Properties Matched Automatically:
Properties Matched Manually:
·        See the table above (Valid for Characteristics), if these properties are also relevant for the units.
When referring to InfoProviders it is important to differentiate between:
¡        MultiProviders
¡        InfoCubes
¡        ODS Objects and
¡        InfoObjects
InfoObjects are discussed above (see the first table Valid for All Objects Named Above).
Valid for All InfoProviders Named Above:
Properties Matched Automatically:
Properties Matched Manually:
·        New InfoObjects
If InfoObjects in the delivery version do not yet exist in the active version, they are transferred.
·        Manual matching is not necessary.
Valid for MultiProviders
Properties Matched Automatically:
Properties Matched Manually:
·        New InfoProviders
If InfoProviders in the delivery version do not yet exist in the active version, they are transferred.
·        Manual matching is not necessary.
Valid for InfoCubes
Properties Matched Automatically:
Properties Matched Manually:
·        New dimensions
If dimensions in the delivery version do not yet exist in the active version, they are transferred.
·        Manual matching is not necessary.
With the InfoObject catalog object type, InfoObjects that are assigned to a catalog in the delivery version are transferred to the active version automatically. Manual matching is not necessary.
With the transfer rule object type, those objects that exist in the delivery version but are not yet contained in the active version (for example, additional attributes) are added automatically when the match is performed. Manual matching is not necessary.
With the process chain object type, those objects that exist in the delivery version but are not yet contained in the active version (for example, additional objects in the process chain) are added automatically when the match is performed. Manual matching is not necessary.
·        Active Version Available
In this column, the following display options are available:
¡        : The object is available in an active version. You decide whether you want to retain this version or reinstall the latest version of the object.
¡        Date symbol: The object is already available in an active version. However, the active version belongs to an older Content release. SAP recommends that you install the latest version.
¡        Gray symbol: An activated version of the object is available in the system. However, the object status is inactive. If an object version is activated, this indicates that all metadata for the object can be created successfully. The inactive object status indicates that the processed object is inconsistent and cannot currently be used for processing data. Transfer the object again from the SAP delivery version (D version). If this is not enough to change the object status from inactive to active the object has to be postprocessed. You find notes on postprocessing in the activation log.
Postprocessing: An inactive object status may also occur for an InfoObject if changes are made to the structure at field level. Postprocessing the object involves converting the relevant tables in accordance with the activation log.
¡        No indicator: The object is not available in an active version.
7. Make Settings in the Selection List and Install.
Make the required settings in the Install selection list:
Installation Type
Installation Type
Information
Simulate installation
The system runs a test to see whether any errors are likely to occur during the installation. However, not all errors that may occur can be identified during simulation: Some error messages can only be generated when a real A version (and not just a simulation) is available in the system. You should, therefore, only use the simulation function as a rough guide to help you identify and remove basic errors.
Install
The selected objects are installed immediately.
Install in background
The selected objects are installed in the background.
Install and transport
The selected objects are installed immediately and then written to a transport request.
SAP recommends you use the Install in background option because installing a large number of objects can take a long time. Modifying objects that are already active can take an especially long time to complete. Make sure that when you install objects in the background that the versions are not matched. It is always the delivery versions that are installed. These are not matched with any available customer versions.
Refer
Business Content (Versions)
http://help.sap.com/saphelp_nw04/helpdata/en/c1/ea683cc5e8ca68e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/frameset.htm
Thanks,
JituK

I am formatting an ebook and want to convert the doc. to an ePub with the Table of Contents links intact. Is there a way?

I have formatted an ebook in word and created a doc. I now need to also convert it into an ePub. I have downloaded the latest version of pages and am having difficulties trying to make the Table of Contents links work. The tabs in all the youtube videos out there are not showing up in this version. Please help!!!!

You might have more luck here.
Pages for Mac
What version of pages do you have?

Know the tables for FI and COPA datasources

Hi Experts,
For FI and COPA datasources, How do i get to know..What are the table for that data source. any table or tcode to know the tables.
Thanks.

Hi,
Their is no standard tcode is available for tales based on the Datasource but we can get the tables based on the DS in help.sap.com like...below table origin in the link...
http://help.sap.com/saphelp_bic704sp06/helpdata/en/a8/f4153c4eb5d82ce10000000a114084/frameset.htm
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a7f2f294-0501-0010-11bb-80e0d67c3e4a?QuickLink=index&overridelayout=true
FI Tables/Datasources on R3/ECC. What is the link?
Regards,
Satya

This content requires HDCP for playback problem! Apple TV2

Owned Apple TV for two weeks. Two weeks ago, everything was fine for films already in my iTunes library.
This week, when selecting play on a movie, I get the message 'This content requires HDCP for playback problem' inconsistently. Some vids work, some don't. Then they do then they don't! I have tried on a Samsung TV and a Sony Bravia? Same for both!
How do I resolve this. I have tried different HDMI ports, turned Apple TV 2 off and on. Tried different cables (Although my HDMI cable is the one I purchased from Apple).
Any suggestions? Is it something Apple need to fix? This is kinda embarrassing when I tell friends how good Apple TV is, get them round to watch a movie and inconsistently get this.
Many Thanks for any help
Dave.

I too sadly have this handshaking issue. I'm in Phoenix, AZ. Day one buyer for ATV2. Worked all of about two days in terms of streaming HD content from either my MAC or netflix. About the third time i tried to stream HD content from Netflix or Blu Ray digital copies from my Mac, I get the HDCP compliance message stating my display is not authorized.
I have tried every concievable combination of unplugging and rebooting of TV (Samsung 2005 DLP), ATV2, and HDMI switcher (Monoprice) and nothing will work. My DirecTV HD-DVR works like a charm. If I rent an HD pay per view from DirecTV, no problem. If I rent an HD movie on iTunes, won't display it due to the HDCP issue. I've NOT ONCE had an issue with my DirecTV HDDVR having an HDCP compliance issue and of course its connected to my TV via HDMI thru my monoprice HDMI four port switch.
I guess the only other thing I could try is exchanging the unit itself. But everything else works as advertised. It feels like this is just a software issue that needs to be patched, and fast.

8.0.1 has broken Content Link in Piano Roll Editor

Logic 8.0.1 has managed to break Content Link in Piano Roll Editor... Select a MIDI region in Arrange, choose a Screenset for Piano Roll and, with Link active, you'll see the contents for the selected MIDI region. From that point on though, you'll only ever see the contents of that first selection, no matter what other MIDI region is selected. Logic can be forced to reveal the contents of another MIDI region by double-clicking or Option-double-clicking but it's hardly ideal; not when your workflow for the past ten years has been screenset based.
That bug alone is enough for me to go straight back to 8.0
Nice one Apple.

Sorry Captain - you're quite right. When changing screensets, the link is lost.
In Logic 7 the default behaviour is what you want - screensets follow the selected region. This does appear to be broken in 8.0.1
Perhaps some people would prefer this - so that you could have screensets that have Show Contents link mode on for different regions, for example. The best solution would be to have a Preference where one could choose the option one prefers.

Buisness Content link .plz for FI-SL, COPA, SD,CRM

Similar Messages

Maybe you are looking for