Bulk Subscription Change or Place on Hold

I am using SSRS 2005 and SSRS 2008 R2, both Standard edition. On a monthly basis, I have to change 4 reports that each have 50+ subscriptions. Each of these subscriptions run on the same day, but at different times and with different
input parameters. I would like to write code that would allow me to bulk change the date on which the reports would run - as this is the only consistent aspect of the subscription (and the only piece that changes). Currently, I open each individual
subscription on our SSRS Reporting Services website and make the changes there - this takes an incredibly long time. I believe that I have found the database tables within the ReportServer and MSDB databases that I would need to change, however,
my question is, by writing a stored procedure to update these tables manually, will I void any warranty that I may have on my SQL server or render our databases unsupported? Is there a better way to make bulk changes to the date portion of the subscriptions,
given that the time and input parameters differ? Please keep in mind that I am relatively new to this aspect of SSRS. Any help would be greatly appreciated.
Alternatively, I also have a need to be able to put all of the reports that are scheduled to run on a Monday on hold (only when needed). I have also found the proper place on the ReportServer to make this bulk update, but I want to make sure that
I won't be doing more harm than good. Any help here would also be greatly appreciated.
Thank you for your time!
Wendy

Hi
Please go through the follwoing SAP OSS Notes as well ->
1)
Note 1054481 - Problem with deleted limit items
Pre-requsites to SAP OSS Note 1054481
Note 990264 Multiple confirmations cannot be posted for service & limit
Note 1006573 BBP_POC:For service items,delete indicator not transfered
Note 1022458 Limit PO ends in Error Status: Document Contains No Items
Note 1046593 Limit PO - Unable to delete and create new item
2)
Note 1052999 - Deleting Service line item in SRM not updated in ERP
Note 1035220 - Service entry sheet does not retain the unlimited indicator
Related Notes
Note 1022458 - Limit PO ends in Error Status: Document Contains No Items
Note 1006573 - BBP_POC:For service items,delete indicator not transfered
Do let me know.
Regards
- Atul

Similar Messages

How can I change the place of a photo in iPhoto?

How can I change the place label of a photo in iPhoto?

http://support.apple.com/kb/PH2381
LN

IN-PLACE eDiscovery & hold Error

IN-PLACE eDiscovery & hold Error: Having Error 404

im trying eDiscovery I already solved the aboved problems seems it has something to do with authentication but now im having
Status: Failed
Search
Run by:
Run on:
Size: 0 B
Items: 0
Errors:
An unknown error occurred on the search server. Please contact your administrator for assistance. The message from the search server is 'The request failed. The remote server returned an error: (502) Bad Gateway.'.
Search Failed

Changing Decimal Places for Currencies (Table V_TCURX)

The instance is ECC 6.0
We need to change the decimal places for a currency from 0 to 2 decimal places. Is there any impacts of doing that?
Also need to add some currencies which are not in the table. Is there anything need to be careful while doing this. If this table is updated, do we need to update any other tables also which may be impacted?

Hi,
It is not recommended that when postings have already been made, that a change in the currency be done, as amounts posted can become invalid or incorrect as a result (ie USD 100->1.00), which is most critical in production environment Please go through the note 137626 When you made changes via OY04, the effect of which is across all clients.
To change the number of decimal places for a currency already in use, you must convert all the tables in the R/3 System that contain currency fields, so that the data integrity remains. This cannot, however, for both organizational reasons and under the runtime aspect, in a productive system.
You must never change decimal places in a productive system if you have documents posted with this currency. Such a change could lead to inconsistencies in these documents already posted.
In case you really decide to use decimals you may consider to use SAP conversion services for them to convert all documents aready posted as explained in note 434349.
Additional inforamtion:
Note No. 137626 - FAQ: Decimal places for currency codes
                 126857 - Display of amts with correct decimal places in SE16
                   53206 - Processing of currency fields
                     9574 - Currency fields on selection screens
Regards
Ravinagh Boni

Changing decimal place of price field

Hi Experts,
Can any one let me know the impact of changing decimal place of 2 digit to 3 digit for the field NETPR & NETWR in EKPO table?
Requirement is to maintain very negligible amount like 0.001 for some of the items in PIR, contract and PO.
Suitable answer will be rewarded.
Thanks & Regards,
Pushparajh S.

0,01 per 10 is certainly zero and this is not allowed.
Where is this getting rounded? can you name the field?
Of course it does not make sense if you just order a quantity of 1 haivng a price with 3 decimals when the currency allows only 2 decimals, because you cannot pay the 3rd decimal.
such prices make only sense if you buy huge quantities. e.g. 20000 kg with a price of 1,255 Euro per KG,
this is a total of 25100 Euro then, and here the 3rd decimal is about 100 Euro for the total quantity.

Delta changes taken place in PS functionality from 4.6C to ECC 6

Dear All
Can you tell me where we can get delta changes taken place in PS functionality from 4.6C to ECC 6 from?
Is it readily available with SAP sites or do we need to find out manually?How?
Regards
SV

Please refer this post.
Difference between version SAP R/3 4.6C and SAP ERP 6.0
Re: PS between R/3 4.7 and ECC6.0.
Regards
Nitin P.

Problem while changing decimal places in SAP B1 2007

Hi Experts,
I want change the decimal places of Quantity type fields from 2 decimal places to 4 decimal places. But while changing it in Genral settings form ,it shows the error message "Cannot update while another user is connected to the company". it is working in SAP B1 2005B but not in SAP B1 2007
Please help me if you have any solution on this issue..
Thanking you in advance

Paul,
Please see SAP Note 1247060 as is discusses the fact that this did work in 2005, but the behavior was changed in version 2007 ...
https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/smb_searchnotes/display.htm?note_langu=E&;note_numm=0001247060
Eddy

How to change Business Place in SD document?

Dear Sir,
If I set 1 Sales Org. (1100) in SD and 2 Business Area (1100,1400) and 2 Business Place (0000,0004) in FI
when post Invoice it due to the setting of OMJ7 that assign Business Area to Invoice document and I also set the substitution rule in OBBH to check the line item ( if Business Area = '1400' then substitution Business Place = '0004' ) but it not effect for total line in document as shown below. Please recommend how to set ?
Example Document ..
Itm PK   G/L acct G/L Acct Long Text      Tx       Amount      BusA    Bus Place
=================================================================
1 01   1210100 Account receivable -    O7          63.06      1400      0004
2 50   4010100 Sales - Paint                  O7          70.58-     1400     0004
3 40   4010100 Sales - Paint                  O7          11.65      1400     0004
4 50   2440050 Sales Vat                      O7           4.13-      1400     0000   => How to change this Business Place to 0004?
Look forward to hear from you.
Thanks,
Pantip S.

Hi computerflowers,
You can set the document language in Acrobat: File > Properties > Advanced tab > Language drop down box under Reading Options. This informs screen readers (for example) what language the document is written in.
I am not sure that is what you are looking for though. If I am steering you wrong please follow up.
a 'C' student

Changing Decimal places in table TCURX

Hi There
We have a business requirement to change the decimal places in table TCURX from 3 Decimals to 5 Decimal places. No previous postings have been made in foreign currencies.
If no transaction data has been posted in foreign currencies yet, will this have an impact?
What will the impact be?
Regards

Hi,
Refer to this SAP text:
In the R/3 System tables currency fields are stored as decimal figures with a variable number of decimal places. The decimal point is not stored in the field in the database. Instead, each currency field refers to a currency key field. In this transaction you assign the number of decimal places to this currency key uniquely. Example: If you have set currency USD to have two decimal places and you post an amount of 100 USD, an amount of 10000 USD is stored in the currency field in the database. Not until this
amount is processed further or is output does the system use the currency key from the reference field to determine the number of decimal places via this table. In this way the table content can be interpreted correctly for further processing or formatted for output with the correct punctuation. If after posting you changed the number of decimal places for USD, for example, to 3, the existing field content of 10000 would be interpreted for futher processing or output as 10 USD (10.000). This would mean that the contents of tables across the system would, for all currency fields containing an amount in USD,
be interpreted incorrectly by 10 per cent. To change the number of decimal places for a currency already in use, you must convert all the tables in the R/3 System that contain currency fields, so that the data integrity remains. This cannot, however, for both organizational reasons and under the runtime
aspect be carried out in a productive system. The following changes to the TCURX table can
thus lead to the loss of data integrity if you make the changes in a productive system or transport them into a productive system:
o Change to the number of decimal places of an existing currency
o Deletion of an entry from the TCURX table (corresponds to changing the decimal places to the standard value of two decimal places)
o Insertion of an entry in the TCURX (corresponds to changing the standard value of
2 decimal places to a different value), if this is a currency code that already exists
Uncritical changes are any made to this table during the Customizing of a new installation or the insertion of TCURX even during operations, if the currency codes have just been entered in the TCURC table using transaction OY03, signifying that no postings to these currency codes can have been carried out yet.
Regards,
Eli

Changing decimal places for currencies

Hi everyone,
I'm a complete begginer to SAP BI and I need to change a value in SPRO > General Settings > Currencies > Set Decimal Places for Currencies, but the option that I want doesn't exist.
I need to add a new entry with the value: currency - EUR6 and decimals 6, but there is no 6 available. Can anyone tell me where can I add this or what is the table where this information is???
Thanks in advance!
Rogério Brá

ok I think it works - just try and play
This is what I did (sort of same scenario - if you get my drift)
Currency Key MGF - translation ratio 1000:1
Exchange rate is : 11:02750 to the Euro
Invoice entered for 1,000,000.00
Currency calculated as 90.68 eur
(ie 1,000,000/(11.02750 * 1000))
You can play aroudn with direct/indirect to ge the factors right
But it works (I thought it did - I am qualified FICO honest!!)
This wont get you around displaying 6 decimals - BUT it will help with currency conversion

Change decimal places in a KF

Hi,
I have a KF Amount with Data Type = CURR.
This KF has a data element associated ( automatically associated when is created) with Lenght 17 and Decimal places 2.
The KF is used in a ODS as Data Field.
Now the user want to update the field, with 5 decimal places.
I tried, but I couldn't change the Data Element. I read a thread that the Data Type has to be change to FLOAT instead of CURR, but when I see the Data Element it changed to Lenght = 16 and Decimal places = 16, and I cant set the decimal places.
So, Could someone help me?
Thanks, Federico

Hi Federico,
The table 'TCURX' determines how many decimal places the Key figure display the values. Mostly they are of 2 decimal places but in the query you can changing in the properties of the key figures to display 5 places. But you would typically not see all correct values. It will just do a rounding with 5 decimal places.
Hope this helps.
Best Regards,
Hima

Changing Decimal Places in CUNI

hello,
my company's requirement as of the moment is to increase the decimal places being displayed during service request for Activity Unit (AU). current setup is 3 decimal places. we need it to at least 10 to ensure almost exact computation.
i tried changing the decimal places in TC CUNI, but it wouldn't let me proceed. Per error message the ISO code for AU is similar with PC, which is PCE. Upon checking in DEV, PC has no ISO code, but it has in PRD (PCE).
1. how do i go about the ISO code error?
2. what is the impact of changing the decimal places now that the system is live for 8 months now? will it affect existing POs?
3. if it is no longer advisable to change the setup, how will we dispose the difference between the billed amount of contractor against the amount generated during GR/IR and MIR7?
thanks in advance, gurus.

thank you for your inputs, Jeevan. we've tried up to 100,000 since any more will make the PO exceed the original contract amount.
the contract involved will be delivered in a span of many months, and billing and payments will depend on percentage of completion.
i hope someone can enlighten me as to how other companies do it, best practice or not. i'm pretty sure those in construction or property development will find this case familiar. or maybe point me to an article or anything.
thank you for taking the time.

Multicast IP address keep changing on music on hold

Hi
I am trying to set up multicast for music on hold on the cucm 9.
on the cucm, I enable multicast audio sources on MOH server, using base IP 239.1.1.1, and set increment multicast on " ip address"
however the multicast IP address keep changing, sometimes its 239.1.1.1, then after a while it suddenly change to 239.1.1.2 etc..
here is the config on our srst router ( which specify the multicast ip is 239.1.1.1):
is there any way that the multicast ip do not keep changing as its affecting the MOH at the moment.
" config for MOH"
telephony-service
video
srst mode auto-provision none
srst dn template 1
srst dn line-mode dual
max-ephones 265
max-dn 600
ip source-address 10.190.0.1 port 2000
timeouts interdigit 5
system message "GlobalDial Unavailable"
cnf-file location flash:
time-zone 48
date-format dd-mm-yy
voicemail 080758831#
max-conferences 8 gain -6
moh "xmas_jazz.wav"
multicast moh 239.1.1.1 port 16384 route 192.168.1.1
transfer-system full-consult
transfer-pattern 0.T
secondary-dialtone 0
create cnf-files version-stamp 7960 Nov 27 2013 18:23:59
I was thinking to put a few more multicast IP,. but it only allow you to put one ( while the cucm set the IP address as increment)
OC-MHO-VG-SRST(config)#telephony-service
OC-MHO-VG-SRST(config-telephony)#multi
OC-MHO-VG-SRST(config-telephony)#multicast ?
moh Set IP multicast address for use with music-on-hold from flash
OC-MHO-VG-SRST(config-telephony)#multicast moh ?
A.B.C.D Define music-on-hold IP multicast address from flash
OC-MHO-VG-SRST(config-telephony)#multicast moh 239.1.1.2 ?
port Define media port for multicast moh
OC-MHO-VG-SRST(config-telephony)#multicast moh 239.1.1.2

Hi Rachel,
If the Increment Multicast on radio button is set to IP address, each MOH audio source and codec combination is multicast to different IP addresses but uses the same port number. If it is set to Port Number, each MOH audio source and codec combination is multicast to the same IP address but uses different destination port numbers.
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cusrst/admin/sccp_sip_srst/configuration/guide/SCCP_and_SIP_SRST_Admin_Guide/srst_appendix_b_.html#50022
HTH
Manish

Zoom in/out, Move through frame WITHOUT changing the placement/crop size?

How do you actually zoom in and out of a frame, move through it up and down, WITHOUT changing the crop size or placement of the frame?
Scaling doesn't do it...

I mean I don't want the crop size or dimensions to change but I want to move the frame around within the same crop dimensions. Does that make sense?
While showing the image and wireframe in canvas, I should be able to adjust framing without changing dimensions by shift and dragging up or down, but I'm guessing it doesn't work once I've cropped the image since the dimensions are filled to the edge with black.
How can I accomplish this task. The clip is already in a sequences timeline.
Message was edited by: monaya

Change Finder Places User name

Hello all
When I click on Finder on the Dock, it always opens to Places into my short name folder.
Is there a way to change the folder to open to another location?

Pierreiphone wrote:
Hello all
When I click on Finder on the Dock, it always opens to Places into my short name folder.
Is there a way to change the folder to open to another location?
oops. see barney's response.
Message was edited by: V.K.

Bulk Subscription Change or Place on Hold

Similar Messages

Maybe you are looking for