Bumblebee is not work on Arch x86_64

when i install bumblebee on arch_i686 ,it works,
but i install it on x86_64 isn't work .
# pacman -S xf86-video-nouveau nouveau-dri mesa
# pacman -S lib32-virtualgl bumblebee bbswitch
# usermod -a -G bumblebee eveblue
# systemctl enable bumblebeed.service
# reboot
eveblue@Arch:~$ lspci |grep VGA
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
01:00.0 VGA compatible controller: NVIDIA Corporation GF119M [GeForce GT 520M] (rev a1)
how to solved it ?
Last edited by eve_ouyang (2013-06-25 04:06:14)

nourathar wrote:
Hi,
if you only followed the steps you quoted above, I'm more suprised by your suggestion that your nvidia is off on boot when you are on arch_i368.
'Default behaviour of bbswitch is to leave card power state unchanged', as is explained here:
https://wiki.archlinux.org/index.php/Bu … g_bbswitch
Did you configure bbswitch according to the steps outlined there ?
ciao,
J.
(sorry, misread the docs i realize now, and can't delete this post..:()
I use bumblebee and bbswitch and I did configure it in a bbswitch.conf as outlined in the link above, even when now I see it says that is not necessary when using bumblebee. Did you try that ?
thx,nourathar
but the bumblebee install will turn the Nvidia off,and I had read the wiki before and try myself to configure the bumblebee ,but it doesn't work.
I think ,are there some lib32* not install.
And sorry for my poor english.
Last edited by eve_ouyang (2013-06-19 09:43:22)

Similar Messages

Xerox 7328 workstation printer not working in Arch x86_64

Hi
I've converted from Ubuntu to Arch. My Xerox 7328 was working in ubuntu jaunty 9.04 perfectly with a special ppd file given to us by Xeorox. In Arch, the printer just spews out blank paper. I have tried downgrading cups to 1.3.9 as per what Jaunty used but the only difference is the printer does not spew out as MUCH blank paper! I don't know where to troubleshoot on this - please could someone provide pointers as to how I can go about solving this?
Thanks
M

https://wiki.archlinux.org/index.php/Fo … ow_to_Post

[HELP] SpaceChem from Steam is not working on Arch x86_64

Hi,
I'm trying to get SpaceChem to work by disabling STEAM_RUNTIME, disable in-game overlay, install dependencies but none seem worked.
Here is steam output when I tried to run SpaceChem
ERROR: ld.so: object '/home/linux/.local/share/Steam/ubuntu12_32/gameoverlayrenderer.so' from LD_PRELOAD cannot be preloaded (wrong ELF class: ELFCLASS32): ignored.
ERROR: ld.so: object '/home/linux/.local/share/Steam/ubuntu12_32/gameoverlayrenderer.so' from LD_PRELOAD cannot be preloaded (wrong ELF class: ELFCLASS32): ignored.
Stacktrace:
at (wrapper managed-to-native) Tao.Sdl.Sdl.SDL_SetVideoMode (int,int,int,int) <0xffffffff>
at #=qQdKRcUfE46$efAqMsrzhkw==.#=qIIRTW0KinnT0wX4ub7J9Uw== (Impeller.Vector2i,bool,bool,bool) <0x002ef>
at #=qQdKRcUfE46$efAqMsrzhkw==.#=qgLEANBhVfIuIevx4ZYI9dQ== () <0x004ab>
at #=qQdKRcUfE46$efAqMsrzhkw==.#=qtAieMJa3O4$ICce59T5vcg== () <0x000f7>
at #=qT5m9zMMOGgeXuvB5RBp1CjKxG2TMp9VAFSsa0vglCLY=.#=qXYEX0UCMEzgZT5Za8zdXCw== (#=qQdKRcUfE46$efAqMsrzhkw==) <0x00093>
at #=q_kNnXHjBp6OH1879peO3_DruPfChZ2vzI_L2drgdLTw=.#=qC1N1QIcG3BaOsMiqVVYv5w== (string[]) <0x001d3>
at (wrapper runtime-invoke) <Module>.runtime_invoke_int_object (object,intptr,intptr,intptr) <0xffffffff>
at (wrapper managed-to-native) System.AppDomain.ExecuteAssembly (System.AppDomain,System.Reflection.Assembly,string[]) <0xffffffff>
at System.AppDomain.ExecuteAssemblyInternal (System.Reflection.Assembly,string[]) <0x0002b>
at System.AppDomain.ExecuteAssembly (string,System.Security.Policy.Evidence,string[]) <0x00027>
at (wrapper remoting-invoke-with-check) System.AppDomain.ExecuteAssembly (string,System.Security.Policy.Evidence,string[]) <0xffffffff>
at (wrapper xdomain-dispatch) System.AppDomain.ExecuteAssembly (object,byte[]&,byte[]&,string,string[]) <0xffffffff>
at (wrapper xdomain-invoke) System.AppDomain.ExecuteAssembly (string,System.Security.Policy.Evidence,string[]) <0xffffffff>
at (wrapper remoting-invoke-with-check) System.AppDomain.ExecuteAssembly (string,System.Security.Policy.Evidence,string[]) <0xffffffff>
at #=q_kNnXHjBp6OH1879peO3_DruPfChZ2vzI_L2drgdLTw=.#=qC1N1QIcG3BaOsMiqVVYv5w== (string[]) <0x000cb>
at (wrapper runtime-invoke) <Module>.runtime_invoke_int_object (object,intptr,intptr,intptr) <0xffffffff>
Native stacktrace:
./mono() [0x80e16fc]
./mono() [0x81209fc]
./mono() [0x806094d]
linux-gate.so.1(__kernel_rt_sigreturn+0) [0xf77a0bd0]
/usr/lib32/libc.so.6(+0x80e86) [0xf75b3e86]
/usr/lib32/libudev.so.0(udev_device_new_from_syspath+0x53) [0xf252b083]
/usr/lib32/libudev.so.1(udev_device_new_from_devnum+0xac) [0xf251548c]
/usr/lib32/libGL.so.1(+0x49807) [0xf74d2807]
/usr/lib32/libGL.so.1(+0x49d3c) [0xf74d2d3c]
/usr/lib32/libGL.so.1(+0x43f4b) [0xf74ccf4b]
/usr/lib32/libGL.so.1(+0x19bd2) [0xf74a2bd2]
/usr/lib32/libGL.so.1(+0x1606b) [0xf749f06b]
/usr/lib32/libGL.so.1(glXChooseVisual+0x64) [0xf749f1e4]
/home/linux/.local/share/Steam/ubuntu12_32/gameoverlayrenderer.so(glXChooseVisual+0x37) [0xf778a6b7]
/usr/lib32/libSDL-1.2.so.0(+0x3ba40) [0xf16dda40]
/usr/lib32/libSDL-1.2.so.0(+0x40c54) [0xf16e2c54]
/usr/lib32/libSDL-1.2.so.0(+0x4107d) [0xf16e307d]
/usr/lib32/libSDL-1.2.so.0(SDL_SetVideoMode+0x25f) [0xf16d054f]
[0xf3ad5884]
[0xf1924d80]
[0xf1912e24]
[0xf1911540]
[0xf19104bc]
[0xf3ac7324]
[0xf3ac7486]
./mono() [0x8064c2c]
Debug info from gdb:
=================================================================
Got a SIGSEGV while executing native code. This usually indicates
a fatal error in the mono runtime or one of the native libraries
used by your application.
=================================================================
Assert( Assertion Failed: m_nNumRegisteredWriters == 0 ):/home/buildbot/buildslave_steam/steam_rel_client_ubuntu12_linux/build/src/tier1/../tier1/fileio.cpp:4002
It's also worth mentioning that I'm using [testing]
Thanks

https://wiki.archlinux.org/index.php/Fo … ow_to_Post

[SOLVED] wine Visio 2007 or Project 2007 not working on ARCH 64 bits

Hi, i'm having problems installing Visio 2007 or any other microsoft app.
My system;
$ uname -r
2.6.39-ARCH
$ pacman -Qs wine
local/wine 1.3.23-1
A compatibility layer for running Windows programs
local/wine_gecko 1.2.0-1
Wine's built-in replacement for Microsoft's Internet Explorer
local/winetricks 20110629-1
Script to install various redistributable runtime libraries in Wine.
That's what i've done.
$ pacman -S wine wine_gecko winetricks lib32-libpng --> OK
$ WINEARCH=win32 winecfg --> OK
wine: created the configuration directory '/home/user/.wine'
err:module:load_builtin_dll failed to load .so lib for builtin L"winemp3.acm": libmpg123.so.0: cannot open shared object file: No such file or directory
err:module:load_builtin_dll failed to load .so lib for builtin L"winemp3.acm": libmpg123.so.0: cannot open shared object file: No such file or directory
fixme:storage:create_storagefile Storage share mode not implemented.
err:mscoree:LoadLibraryShim error reading registry key for installroot
err:mscoree:LoadLibraryShim error reading registry key for installroot
err:mscoree:LoadLibraryShim error reading registry key for installroot
err:mscoree:LoadLibraryShim error reading registry key for installroot
err:mscoree:LoadLibraryShim error reading registry key for installroot
err:mscoree:LoadLibraryShim error reading registry key for installroot
fixme:iphlpapi:NotifyAddrChange (Handle 0x8fee91c, overlapped 0x8fee900): stub
err:module:load_builtin_dll failed to load .so lib for builtin L"msxml3.dll": libxml2.so.2: cannot open shared object file: No such file or directory
wine: configuration in '/home/user/.wine' has been updated.
$ winetricks msxml3 --> OK
$ winetricks corefonts --> OK
$ winetricks riched20 --> OK
$ winetricks gdiplus --> OK
$ wine Downloads/Microsoft/Visio2007/setup.exe
err:ntlm:SECUR32_initNTLMSP ntlm_auth was not found or is outdated. Make sure that ntlm_auth >= 3.0.25 is in your path.
err:ntlm:SECUR32_initNTLMSP Usually, you can find it in the winbind package of your distribution.
fixme:system:SetProcessDPIAware stub!
fixme:htmlhelp:HtmlHelpW HH case HH_INITIALIZE not handled.
err:ole:CoGetClassObject class {f5078f32-c551-11d3-89b9-0000f81fe221} not registered
err:ole:CoGetClassObject no class object {f5078f32-c551-11d3-89b9-0000f81fe221} could be created for context 0x1
fixme:htmlhelp:HtmlHelpW HH case HH_UNINITIALIZE not handled.
fixme:process:GetLogicalProcessorInformation ((nil),0x33f038): stub
fixme:netapi32:NetGetJoinInformation Semi-stub (null) 0x33f034 0x33f028
$ err:ntlm:SECUR32_initNTLMSP ntlm_auth was not found or is outdated. Make sure that ntlm_auth >= 3.0.25 is in your path.
err:ntlm:SECUR32_initNTLMSP Usually, you can find it in the winbind package of your distribution.
fixme:heap:HeapSetInformation 0x110000 1 (nil) 0
fixme:imm:ImmDisableIME (-1): stub
fixme:advapi:RegisterEventSourceW ((null),L"Microsoft Office 12"): stub
fixme:advapi:ReportEventW (0xcafe4242,0x0001,0x0000,0x00001388,(nil),0x000b,0x00000104,0x300bcf54,0x68ca3c): stub
err:eventlog:ReportEventW L"office12setup"
err:eventlog:ReportEventW L"{10120000-0f00-0000-0000--0000000ff1ce}"
err:eventlog:ReportEventW L"12.0.4518.1014"
err:eventlog:ReportEventW L"x"
err:eventlog:ReportEventW L"0x80040154"
err:eventlog:ReportEventW L"visio.en-us_setup.xml"
err:eventlog:ReportEventW L"x"
err:eventlog:ReportEventW L"x"
err:eventlog:ReportEventW L"NIL"
err:eventlog:ReportEventW L"NIL"
err:eventlog:ReportEventW L"NIL"
fixme:advapi:DeregisterEventSource (0xcafe4242) stub
fixme:process:GetLogicalProcessorInformation ((nil),0x33fc20): stub
fixme:netapi32:NetGetJoinInformation Semi-stub (null) 0x33fc1c 0x33fc10
I'll appreciate any help on this.
Last edited by jorel1981 (2011-07-03 16:16:24)

Ok, installed riched30 but still not working...
$ wine Downloads/Microsoft/Visio2007/setup.exeerr:ntlm:SECUR32_initNTLMSP ntlm_auth was not found or is outdated. Make sure that ntlm_auth >= 3.0.25 is in your path.
err:ntlm:SECUR32_initNTLMSP Usually, you can find it in the winbind package of your distribution.
fixme:system:SetProcessDPIAware stub!
fixme:htmlhelp:HtmlHelpW HH case HH_INITIALIZE not handled.
fixme:richedit:REExtendedRegisterClass semi stub
fixme:richedit:ME_HandleMessage EM_SETEDITSTYLE: stub
fixme:richedit:ME_HandleMessage EM_SETBIDIOPTIONS: stub
fixme:richedit:ME_HandleMessage EM_SETEDITSTYLE: stub
fixme:richedit:ME_HandleMessage EM_SETBIDIOPTIONS: stub
fixme:richedit:ME_HandleMessage EM_SETEDITSTYLE: stub
fixme:richedit:ME_HandleMessage EM_SETBIDIOPTIONS: stub
fixme:richedit:ME_HandleMessage EM_SETEDITSTYLE: stub
fixme:richedit:ME_HandleMessage EM_SETBIDIOPTIONS: stub
err:ole:CoGetClassObject class {f5078f32-c551-11d3-89b9-0000f81fe221} not registered
err:ole:CoGetClassObject no class object {f5078f32-c551-11d3-89b9-0000f81fe221} could be created for context 0x1
fixme:htmlhelp:HtmlHelpW HH case HH_UNINITIALIZE not handled.
fixme:process:GetLogicalProcessorInformation ((nil),0x33f038): stub
fixme:netapi32:NetGetJoinInformation Semi-stub (null) 0x33f034 0x33f028
$ err:ntlm:SECUR32_initNTLMSP ntlm_auth was not found or is outdated. Make sure that ntlm_auth >= 3.0.25 is in your path.
err:ntlm:SECUR32_initNTLMSP Usually, you can find it in the winbind package of your distribution.
fixme:heap:HeapSetInformation 0x110000 1 (nil) 0
fixme:imm:ImmDisableIME (-1): stub
fixme:advapi:RegisterEventSourceW ((null),L"Microsoft Office 12"): stub
fixme:advapi:ReportEventW (0xcafe4242,0x0001,0x0000,0x00001388,(nil),0x000b,0x00000104,0x300bcf54,0x79ca3c): stub
err:eventlog:ReportEventW L"office12setup"
err:eventlog:ReportEventW L"{10120000-0f00-0000-0000--0000000ff1ce}"
err:eventlog:ReportEventW L"12.0.4518.1014"
err:eventlog:ReportEventW L"x"
err:eventlog:ReportEventW L"0x80040154"
err:eventlog:ReportEventW L"visio.en-us_setup.xml"
err:eventlog:ReportEventW L"x"
err:eventlog:ReportEventW L"x"
err:eventlog:ReportEventW L"NIL"
err:eventlog:ReportEventW L"NIL"
err:eventlog:ReportEventW L"NIL"
fixme:advapi:DeregisterEventSource (0xcafe4242) stub
err:ole:CoInitializeEx Attempt to change threading model of this apartment from multi-threaded to apartment threaded
err:ole:CoInitializeEx Attempt to change threading model of this apartment from multi-threaded to apartment threaded
fixme:richedit:ME_HandleMessage EM_SETMARGINS: stub
fixme:richedit:ME_HandleMessage EM_SETMARGINS: stub
err:ole:CoUninitialize Mismatched CoUninitialize
err:ole:CoUninitialize Mismatched CoUninitialize
fixme:process:GetLogicalProcessorInformation ((nil),0x33fc20): stub
fixme:netapi32:NetGetJoinInformation Semi-stub (null) 0x33fc1c 0x33fc10
Last edited by jorel1981 (2011-07-02 00:34:32)

Xerox_mfp scanner not working in arch (compilation bug?)

I have discovered that my xerox_mfp printer/scanner Xerox Workcentre 3119 is not working in archlinux. However, with the same libsane version, scanner is working in debian.
I checked the two libraries libsane-xerox_mfp.so.1.0.22: they are different in size.
I have copied the debian library in /usr/lib/sane and now the scanner is working.
Compilation bug?
Last edited by hifi25nl (2011-05-24 17:35:01)

architecture: x86-64
samsung scx-4200: xerox_mfp sane backend
the same problem
libsane-xerox_mfp.so.1.0.22 from debian libsane_1.0.22-6_amd64 package is working

Internal Microphone not working on Arch (Dell Studio 1558)

Hello community,
I never managed to get the internal microphone of my Dell Studio 1558 to work with ArchLinux 64Bit. I know that the soundhip of Dell Notebooks is a bit tricky sometimes. I already tried several configurations in the alsamixer. Unfortunately there are not much possibilites. In this Screenshot you can see all mixers that are displayed in alsamixer. No matter what I do, the microphone will never work. Of course it would not work with pulseaudio, too.
I also tried several configurations in /etc/modprobe.d/modprobe.conf
options snd-hda-intel model=6stack-dell
options snd-hda-intel model=3stack-dell
options snd-hda-intel model=dell
To make sure the mic is not borken and works on Linux I booted a 32Bit Xubuntu 11.04 Live system. The Microphone worked there and Alsamixer gave me many more mixers there.
I don't know what info to provide... At least here is cat /proc/asound/cards. I doubt it's helpful though.
cat /proc/asound/cards
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xf0b00000 irq 43
Help is appreciated Thanks already.

A long time ago I had a problem with the microphone in my Dell Studio 1737. When I finally got it working, I wrote down how I did it. Now I wish I had been more of a chatterbox... Anyway, here's my note:
/etc/asound.state
control.11 {
value.0 true
value.1 true
Hope you can make heads or tails of it.

Bumblebee does not work every first time I start it

When I ran
optirun firefox
it failed and showed
[ 7661.980841] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) systemd-logind: failed to get session: PID 16651 does not belong to any known session
[ 7661.980869] [ERROR]Aborting because fallback start is disabled.
But when I tried running again it worked.
journalctl:
8月 28 22:09:36 swordfeng-PC bumblebeed[254]: [ 7661.929488] [WARN][XORG] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
8月 28 22:09:36 swordfeng-PC bumblebeed[254]: [ 7661.929507] [WARN][XORG] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
8月 28 22:09:36 swordfeng-PC bumblebeed[254]: [ 7661.929519] [ERROR][XORG] (EE) systemd-logind: failed to get session: PID 16651 does not belong to any known session
8月 28 22:09:36 swordfeng-PC bumblebeed[254]: [ 7661.929523] [ERROR][XORG] (EE) /dev/dri/card0: failed to set DRM interface version 1.4: Permission denied
8月 28 22:09:36 swordfeng-PC bumblebeed[254]: [ 7661.929527] [WARN][XORG] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
8月 28 22:09:36 swordfeng-PC bumblebeed[254]: [ 7661.929538] [WARN][XORG] (WW) Unresolved symbol: fbGetGCPrivateKey
8月 28 22:09:36 swordfeng-PC bumblebeed[254]: [ 7661.929545] [ERROR][XORG] (EE) NVIDIA(GPU-0): Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please
8月 28 22:09:36 swordfeng-PC bumblebeed[254]: [ 7661.929548] [ERROR][XORG] (EE) NVIDIA(GPU-0): check your system's kernel log for additional error
8月 28 22:09:36 swordfeng-PC bumblebeed[254]: [ 7661.929551] [ERROR][XORG] (EE) NVIDIA(GPU-0): messages and refer to Chapter 8: Common Problems in the
8月 28 22:09:36 swordfeng-PC bumblebeed[254]: [ 7661.929554] [ERROR][XORG] (EE) NVIDIA(GPU-0): README for additional information.
8月 28 22:09:36 swordfeng-PC bumblebeed[254]: [ 7661.929557] [ERROR][XORG] (EE) NVIDIA(GPU-0): Failed to initialize the NVIDIA graphics device!
8月 28 22:09:36 swordfeng-PC bumblebeed[254]: [ 7661.929560] [ERROR][XORG] (EE) NVIDIA(0): Failing initialization of X screen 0
8月 28 22:09:36 swordfeng-PC bumblebeed[254]: [ 7661.929564] [ERROR][XORG] (EE) Screen(s) found, but none have a usable configuration.
8月 28 22:09:36 swordfeng-PC bumblebeed[254]: [ 7661.929567] [ERROR][XORG] (EE)
8月 28 22:09:36 swordfeng-PC bumblebeed[254]: [ 7661.929570] [ERROR][XORG] (EE) no screens found(EE)
8月 28 22:09:36 swordfeng-PC bumblebeed[254]: [ 7661.929573] [ERROR][XORG] (EE)
8月 28 22:09:36 swordfeng-PC bumblebeed[254]: [ 7661.929577] [ERROR][XORG] (EE) Please also check the log file at "/var/log/Xorg.8.log" for additional information.
8月 28 22:09:36 swordfeng-PC bumblebeed[254]: [ 7661.929580] [ERROR][XORG] (EE)
8月 28 22:09:36 swordfeng-PC bumblebeed[254]: [ 7661.929583] [ERROR][XORG] (EE) Server terminated with error (1). Closing log file.
8月 28 22:09:36 swordfeng-PC bumblebeed[254]: [ 7661.980795] [ERROR]X did not start properly
8月 28 22:12:24 swordfeng-PC kernel: nvidia 0000:01:00.0: irq 50 for MSI/MSI-X
8月 28 22:12:24 swordfeng-PC kernel: ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
8月 28 22:12:24 swordfeng-PC kernel: ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
8月 28 22:12:24 swordfeng-PC kernel: ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
8月 28 22:12:24 swordfeng-PC kernel: ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
8月 28 22:12:24 swordfeng-PC kernel: ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
8月 28 22:12:24 swordfeng-PC kernel: ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
8月 28 22:12:24 swordfeng-PC kernel: ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
8月 28 22:12:24 swordfeng-PC kernel: ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
8月 28 22:12:24 swordfeng-PC kernel: ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
8月 28 22:12:25 swordfeng-PC bumblebeed[254]: [ 7831.069802] [WARN][XORG] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
8月 28 22:12:25 swordfeng-PC bumblebeed[254]: [ 7831.069813] [WARN][XORG] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
8月 28 22:12:25 swordfeng-PC bumblebeed[254]: [ 7831.069828] [ERROR][XORG] (EE) systemd-logind: failed to get session: PID 16943 does not belong to any known session
8月 28 22:12:25 swordfeng-PC bumblebeed[254]: [ 7831.069831] [ERROR][XORG] (EE) /dev/dri/card0: failed to set DRM interface version 1.4: Permission denied
8月 28 22:12:25 swordfeng-PC bumblebeed[254]: [ 7831.069833] [WARN][XORG] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
8月 28 22:12:25 swordfeng-PC bumblebeed[254]: [ 7831.069839] [WARN][XORG] (WW) Unresolved symbol: fbGetGCPrivateKey
8月 28 22:12:25 swordfeng-PC bumblebeed[254]: [ 7831.069845] [WARN][XORG] (WW) NVIDIA(0): Unable to get display device for DPI computation.
8月 28 22:12:25 swordfeng-PC bumblebeed[254]: [ 7831.069849] [ERROR][XORG] (EE) NVIDIA(0): Failed to initiate mode change.
8月 28 22:12:25 swordfeng-PC bumblebeed[254]: [ 7831.069851] [ERROR][XORG] (EE) NVIDIA(0): Failed to complete mode change
8月 28 22:12:25 swordfeng-PC bumblebeed[254]: [ 7831.069859] [ERROR][XORG] (EE) /dev/dri/card0: failed to set DRM interface version 1.4: Permission denied
8月 28 22:12:29 swordfeng-PC kernel: [drm] Module unloaded
8月 28 22:12:29 swordfeng-PC kernel: bbswitch: disabling discrete graphics
8月 28 22:12:29 swordfeng-PC kernel: ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
8月 28 22:12:29 swordfeng-PC kernel: pci 0000:01:00.0: Refused to change power state, currently in D0
8月 28 22:12:29 swordfeng-PC bumblebeed[254]: [ 7834.886245] [ERROR][XORG] (EE) Server terminated successfully (0). Closing log file.
22:09 is the first time and 22:12 is the second time.
I tried what the wiki Troubleshooting section 'systemd-logind: failed to get session: PID XXX does not belong to any known session' said but nothing changed.

Did you do this:
8月 28 22:09:36 swordfeng-PC bumblebeed[254]: [ 7661.929577] [ERROR][XORG] (EE) Please also check the log file at "/var/log/Xorg.8.log" for additional information.
Any additional info there?
optirun -vv firefox
could give some hints too.
Did it ever work? Or is this your first try with bumblebee on that system?

VMware 5 not working with Arch udev

Okay I am having an issue running VMware 5 in Arch using udev. I can get VMware to install and run in window mode, but the moment I go full screen I get an error stating that it cannot open tty0. On this computer I have the devfs=nomount added to grub.
On another computer I did not add devfs=nomount so I am using devfs instead of udev .. it works perfectly .. also in full screen.
I looked in the /dev directory on the system using devfs and found that tty0 is a link pointing to vc/0 so I thought that if I go to the udev system and just ln -s /dev/vc/0 /dev/tty0 it would work. It ends up going horribly wrong!
I have turned OFF udev on my first system and verified that it works when I mount devfs. Since udev will eventually replace devfs I would like to get it working with udev. Anyone have a clue? The udev rules file is default btw from a new install if you are wondering.

johnr wrote:
do you have a customized .rules file in /etc/udev/udev.rules/ ? You should have a line like this:
KERNEL="tty[0-9]*", NAME="vc/%n", SYMLINK="%k"
I have VMware 5 working using udev, and it will work in Full Screen Mode. Hope that helps.[/code]
That is wierd. I looked at my udev.rules file and had this:
[code]
# tty devices
SUBSYSTEM="tty", GROUP="tty"
KERNEL="tty[0-9]*", NAME="vc/%n"
KERNEL="ttyS[0-9]*", NAME="tts/%n", SYMLINK="ttyS%n"
KERNEL="ttyUSB[0-9]*", NAME="tts/USB%n"
[/code]
All I did was add SYMLINK="tty%n" to the line and it worked fine. Funny thing is, this is the way it looks on all of my installed computers. Is it because I enabled testing?

[SOLVED] Warcraft 3 (with Wine) does not work in Arch

Okay. I played a lot Warcraft III The Frozen Throne with Wine in Ubuntu. When I started to use Arch, of course I wanted to continue playing.
But, when I started the game for the first time it gets into main screen (with 800x600 resolution, it is default when you start the game for the first time, my xorg.conf supports it) but freezes after about 2 secs. And I have to kill X. But now it even does not start (it changes resolution from 1920x1200 to 800x600, but does not continue)! I'm using KDE4.1 - is this somehow related to nVidia driver bug (I'm using nVidia GeForce 8800 Ultra)?
Arch 64bit KDE4.1
Wine 1.1.3 (installed with this, but also tested this - same problem)
WC3 patched 1.22 - installed MS Visual C 2005 Runtimes in order to get it work (see http://appdb.winehq.org/objectManager.p … n&iId=3126 )
I'm running the game from NTFS partition.
Edit: Tested with emulated desktop. Problem remains.
Edit2: Solved problem with 32bit Arch. Works like a charm!
Last edited by Exitium (2008-10-07 19:04:01)

moljac024 wrote:If you're a hardcore gamer then I'll just advise you to keep Windows installed for your gaming needs. There's nothing wrong with dual-booting for that
I have (nLited) WinXP for games. But WC3 works fine with Wine, that's why I want to play it with Linux. It's faster just click a shortcut without rebooting.
Rokixz wrote:The best solution for Hardgamers is to buy a xbox360
I don't prefer consoles. And FPS games (which I play most) are crap on consoles.
Dheart wrote:Now that I think of...
Let me guess: You are using hardware acceleration set to "Emulation" and Driver emulation with alsa.
For some reason WarCraft III doesn't like those (Hardware acceleration in particular...) Set Hardware acceleration to Basic or Full and the game will launch...
It's set to "Full". And as I said, game launches but freezes after a few secs. But music continues even if a screen is frozen.
Last edited by Exitium (2008-09-06 10:49:29)

[solved] ruby script do not work (in arch)

Hi!
I want to change my csv blinklist exported data to a html bookmarks format (to import it to delicious)
I installed ruby, and used this script: http://rubenlaguna.com/wp/2010/01/03/mi … v-to-html/
but it shows this error:
$ ruby change.rub
/usr/lib/ruby/1.9.1/csv.rb:1329:in `initialize': can't convert String into Integer (TypeError)
from /usr/lib/ruby/1.9.1/csv.rb:1329:in `open'
from /usr/lib/ruby/1.9.1/csv.rb:1329:in `open'
from change.rub:18:in `block in <main>'
from change.rub:6:in `open'
from change.rub:6:in `<main>'
the csv file looks like this:
http://pastebin.ca/1737483
any idea what is wrong?
friends, that do not uses arch, tested it and it worked in their machines...
Last edited by luuuciano (2010-01-04 19:15:35)

Hi, the problem is that Arch Linux uses the newer Ruby 1.9.x version which is incompatible with that script. I have tried to fix the script for you, it seems to work but I don't even know what delicious is so you'll have to just try it and see
http://pastebin.ca/1737706

Wireless not working after arch install

Basically, I have an intel PRO/wireless 4965 AGN wireless card in my computer. When booting Archlinux from live disk, I could set up my wireless network and connect with basically no problem. After installation however, Arch will not connect to my wireless connection using the same connection procedure. If I use very precise timing, I can get ping to ping google once, but then it loses the connection. I tried the wired connection to see if I could at least install the rest of my system and deal with the wireless later, but the wired connection also fails to connect (I don't know if it ever was able to connect in the first place. Network card is Realtek RTL8101E/RTL8102E). I am installing from the 2011.08.19 core disk.
Any help would be much appreciated.

Start off with having a look at this wiki article. If you can't resolve the issue with the info found there, it'll at least give you an idea of which info to provide in order for us to help you troubleshoot this (with the current level of detail provided your guess is as good as mine).
As a general pointer, also consider disabling ipv6 if you have it enabled (and if you have no need for it).

[SOLVED] Steam not working on arch

I'm on a (relatively) fresh install of arch. I've just spent all day today configuring my various applications. However, when I install steam through pacman and try to run it, it says
Setting up Steam content in /home/seth/.local/share/Steam
and then just hangs. If I ever get fed up of it hanging here and try to restart, it won't say that and instead I'll just get a blinking cursor. I also noticed my cpu gets hotter while this operation is running, but nothing seems to be happening.
I have a asus ux32vd. Optifine/primusrun works fine for any other application.
I have no idea where to look for errors.
UPDATE:
if I delete the section of /usr/bin/steam that disallows root to run steam, and then run it as root - it works.
Last edited by SuperZanti (2014-09-20 00:04:02)

If I run
zenity --width 650 --height 500 --text-info --title="hello" --checkbox="yes"
it hangs
if I run
zenity --question --text "test"
it hangs
if I run
sudo zentiy --question --text "test"
it displays properly
Finally, if I install YAD from the AUR and run
yad --question --text "test"
it displays properly
Last edited by SuperZanti (2014-09-18 05:11:58)

Linksys NIC not working with RHEL4 x86_64

An attempt to configure 2 nodes RAC on Linux x86_64 fails due to Linksys NIC problem.
I have the following 2 network adapters on 2 machines running RHEL4 - 2.6.9-42.0.10.ELsmp #1 SMP Fri Feb 16 17:13:42 EST 2007 x86_64 x86_64 x86_64 GNU/Linux
# lspci -v
eth1
05:09.0 Ethernet controller: Linksys NC100 Network Everywhere Fast Ethernet 10/100 (rev 11)
Subsystem: Linksys: Unknown device 0574
Flags: bus master, medium devsel, latency 32, IRQ 201
I/O ports at 1100 [size=256]
Memory at e0a01000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [c0] Power Management version 2
eth0
3f:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5752 Gigabit Ethernet PCI Express (rev 01)
Subsystem: Hewlett-Packard Company: Unknown device 3011
Flags: bus master, fast devsel, latency 0, IRQ 233
Memory at e0500000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [48] Power Management version 2
Capabilities: [50] Vital Product Data
Capabilities: [58] Message Signalled Interrupts: 64bit+ Queue=0/3 Enable+
Capabilities: [d0] Express Endpoint IRQ 0
Capabilities: [100] Advanced Error Reporting
Capabilities: [13c] Virtual Channel
They're connected to a Netgear GS108 8-Port 10/100/1000 Copper Gigabit Ethernet Switch.
[root@plbde-nashua1 devices]# ifconfig
eth0 Link encap:Ethernet HWaddr 00:14:BF:53:B8:B9
inet addr:192.168.1.100 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::214:bfff:fe53:b8b9/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:280028 errors:0 dropped:0 overruns:0 frame:0
TX packets:914 errors:5 dropped:0 overruns:0 carrier:5
collisions:0 txqueuelen:1000
RX bytes:21224432 (20.2 MiB) TX bytes:82508 (80.5 KiB)
Interrupt:201 Base address:0x4000
eth1 Link encap:Ethernet HWaddr 00:13:21:EB:84:D4
inet addr:138.1.17.243 Bcast:138.1.19.255 Mask:255.255.252.0
inet6 addr: fe80::213:21ff:feeb:84d4/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:12908 errors:0 dropped:0 overruns:0 frame:0
TX packets:362 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:948009 (925.7 KiB) TX bytes:64346 (62.8 KiB)
Interrupt:185
eth0 used for private (local) network using Ethernet controller: Linksys NC100 Network Everywhere Fast Ethernet 10/100 (rev 11) - Model: LNE100TX
eth1 used for public network using Broadcom Corporation NetXtreme BCM5752 Gigabit Ethernet PCI Express (rev 01)
If I deactivate eth0 or disconnect them from the switch then I can successfully ping from/to both machines via public network eth1.
However, if I plug back eth0 then it looks like it messes up everything and this is what happens:
1- I can no longer ping from both machine1 to machine2. Ping hangs and strace shows:
sendmsg(3, {msg_name(16)={sa_family=AF_INET, sin_port=htons(0), sin_addr=inet_addr("138.1.17.252")}, msg_iov(1)=[{"\10\0\263\323\2547\0\3\262\236/F\0\0\0\0\3549\v\0\0\0\0"..., 64}], msg_controllen=0, msg_flags=0}, 0) = 64
recvmsg(3, 0x7fbfffe680, 0) = -1 EAGAIN (Resource temporarily unavailable)
2- I can ping from machine2 to machine1 but it shows the following output:
64 bytes from plbde-nashua1.us.oracle.com (138.1.17.243): icmp_seq=3 ttl=64 time=0.086 ms
wrong data byte #30 should be 0x1e but was 0x28
#16 10 11 12 13 14 15 16 17 18 19 1a 1b 1c 1d 28 4 40 0 28 4 40 0 28 4 40 0 1e 1f 20 21 1e 1f
#48 20 21 1e 1f 20 21 1e 1f
Then I unplugged the public interfaces eth1 from the switch to test it only with the private network. I am unable to ping one another! Ping hangs and strace shows the following:
sendmsg(3, {msg_name(16)={sa_family=AF_INET, sin_port=htons(0), sin_addr=inet_addr("192.168.1.101")}, msg_iov(1)=[{"\10\0\354\356\256J\0\3~\0262F\0\0\0\0\353\223\2\0\0\0\0"..., 64}], msg_controllen=0, msg_flags=0}, 0) = 64
recvmsg(3, 0x7fbfffe500, 0) = -1 EAGAIN (Resource temporarily unavailable)
Does anyone have any idea of why this is happening?
Could this be a bug or incompatibily between RHEL4 and Linksys LNE100TX NIC?
Any comments are welcome.

Hi,
First please you disable all firewall and disabe SElinux.
Second When you want to ping some machine .You can try use 'ping -I eth0 192.168.1.101'
In fact ,don't recommand the two network adapter cards in the same machine connect the same switch.
Jason

[SOLVED] flash not working in arch

hi
i have arch+gnome3 and i installed "flashplugin 10.2.159.1-2" from repos but i dont have flash in my browsers(firefox+epiphany+chromium)
what is happening? can it be because gnome3 is in testing repo?
thx
Last edited by thelastblack (2011-05-06 08:04:56)

ok, thx for answer
i saw and about:plugins said no enabled plugin was founded
i tried reinstalling and at the end after installation it said:
"warning: directory permissions differ on usr/lib/mozilla/
filesystem: 700 package: 75"
and there is no directory ~/.mozilla/plugings ...
there is just extensions and firefox folders..
so, could this be a problem?
Last edited by thelastblack (2011-05-03 16:52:49)

Copy and paste not working with Arch as guest on virtualbox

In my ~/.xinitrc file I have the following:
exec awesome
/usr/bin/VBoxClient-all
VBoxClient-all &
I have checked the /usr/bin directory and there is no VBoxClient-all file.
I have installed the virtualbox-guest-utils aswell as adding the following to /etc/modules-load.d/virtualbox.conf:
vboxguest
vboxsf
vboxvideo
Thanks.
Last edited by psycho_tea_drinker (2013-07-22 12:24:34)

jasonwryan wrote:https://wiki.archlinux.org/index.php/Xi … ng_started
Thank you! The problem was exec *something* should be on the last line.

Bumblebee is not work on Arch x86_64

Similar Messages

Maybe you are looking for