[HELP] SpaceChem from Steam is not working on Arch x86_64

Hi,
I'm trying to get SpaceChem to work by disabling STEAM_RUNTIME, disable in-game overlay, install dependencies but none seem worked.
Here is steam output when I tried to run SpaceChem
ERROR: ld.so: object '/home/linux/.local/share/Steam/ubuntu12_32/gameoverlayrenderer.so' from LD_PRELOAD cannot be preloaded (wrong ELF class: ELFCLASS32): ignored.
ERROR: ld.so: object '/home/linux/.local/share/Steam/ubuntu12_32/gameoverlayrenderer.so' from LD_PRELOAD cannot be preloaded (wrong ELF class: ELFCLASS32): ignored.
Stacktrace:
at (wrapper managed-to-native) Tao.Sdl.Sdl.SDL_SetVideoMode (int,int,int,int) <0xffffffff>
at #=qQdKRcUfE46$efAqMsrzhkw==.#=qIIRTW0KinnT0wX4ub7J9Uw== (Impeller.Vector2i,bool,bool,bool) <0x002ef>
at #=qQdKRcUfE46$efAqMsrzhkw==.#=qgLEANBhVfIuIevx4ZYI9dQ== () <0x004ab>
at #=qQdKRcUfE46$efAqMsrzhkw==.#=qtAieMJa3O4$ICce59T5vcg== () <0x000f7>
at #=qT5m9zMMOGgeXuvB5RBp1CjKxG2TMp9VAFSsa0vglCLY=.#=qXYEX0UCMEzgZT5Za8zdXCw== (#=qQdKRcUfE46$efAqMsrzhkw==) <0x00093>
at #=q_kNnXHjBp6OH1879peO3_DruPfChZ2vzI_L2drgdLTw=.#=qC1N1QIcG3BaOsMiqVVYv5w== (string[]) <0x001d3>
at (wrapper runtime-invoke) <Module>.runtime_invoke_int_object (object,intptr,intptr,intptr) <0xffffffff>
at (wrapper managed-to-native) System.AppDomain.ExecuteAssembly (System.AppDomain,System.Reflection.Assembly,string[]) <0xffffffff>
at System.AppDomain.ExecuteAssemblyInternal (System.Reflection.Assembly,string[]) <0x0002b>
at System.AppDomain.ExecuteAssembly (string,System.Security.Policy.Evidence,string[]) <0x00027>
at (wrapper remoting-invoke-with-check) System.AppDomain.ExecuteAssembly (string,System.Security.Policy.Evidence,string[]) <0xffffffff>
at (wrapper xdomain-dispatch) System.AppDomain.ExecuteAssembly (object,byte[]&,byte[]&,string,string[]) <0xffffffff>
at (wrapper xdomain-invoke) System.AppDomain.ExecuteAssembly (string,System.Security.Policy.Evidence,string[]) <0xffffffff>
at (wrapper remoting-invoke-with-check) System.AppDomain.ExecuteAssembly (string,System.Security.Policy.Evidence,string[]) <0xffffffff>
at #=q_kNnXHjBp6OH1879peO3_DruPfChZ2vzI_L2drgdLTw=.#=qC1N1QIcG3BaOsMiqVVYv5w== (string[]) <0x000cb>
at (wrapper runtime-invoke) <Module>.runtime_invoke_int_object (object,intptr,intptr,intptr) <0xffffffff>
Native stacktrace:
./mono() [0x80e16fc]
./mono() [0x81209fc]
./mono() [0x806094d]
linux-gate.so.1(__kernel_rt_sigreturn+0) [0xf77a0bd0]
/usr/lib32/libc.so.6(+0x80e86) [0xf75b3e86]
/usr/lib32/libudev.so.0(udev_device_new_from_syspath+0x53) [0xf252b083]
/usr/lib32/libudev.so.1(udev_device_new_from_devnum+0xac) [0xf251548c]
/usr/lib32/libGL.so.1(+0x49807) [0xf74d2807]
/usr/lib32/libGL.so.1(+0x49d3c) [0xf74d2d3c]
/usr/lib32/libGL.so.1(+0x43f4b) [0xf74ccf4b]
/usr/lib32/libGL.so.1(+0x19bd2) [0xf74a2bd2]
/usr/lib32/libGL.so.1(+0x1606b) [0xf749f06b]
/usr/lib32/libGL.so.1(glXChooseVisual+0x64) [0xf749f1e4]
/home/linux/.local/share/Steam/ubuntu12_32/gameoverlayrenderer.so(glXChooseVisual+0x37) [0xf778a6b7]
/usr/lib32/libSDL-1.2.so.0(+0x3ba40) [0xf16dda40]
/usr/lib32/libSDL-1.2.so.0(+0x40c54) [0xf16e2c54]
/usr/lib32/libSDL-1.2.so.0(+0x4107d) [0xf16e307d]
/usr/lib32/libSDL-1.2.so.0(SDL_SetVideoMode+0x25f) [0xf16d054f]
[0xf3ad5884]
[0xf1924d80]
[0xf1912e24]
[0xf1911540]
[0xf19104bc]
[0xf3ac7324]
[0xf3ac7486]
./mono() [0x8064c2c]
Debug info from gdb:
=================================================================
Got a SIGSEGV while executing native code. This usually indicates
a fatal error in the mono runtime or one of the native libraries
used by your application.
=================================================================
Assert( Assertion Failed: m_nNumRegisteredWriters == 0 ):/home/buildbot/buildslave_steam/steam_rel_client_ubuntu12_linux/build/src/tier1/../tier1/fileio.cpp:4002
It's also worth mentioning that I'm using [testing]
Thanks

https://wiki.archlinux.org/index.php/Fo … ow_to_Post

Similar Messages

Xerox 7328 workstation printer not working in Arch x86_64

Hi
I've converted from Ubuntu to Arch. My Xerox 7328 was working in ubuntu jaunty 9.04 perfectly with a special ppd file given to us by Xeorox. In Arch, the printer just spews out blank paper. I have tried downgrading cups to 1.3.9 as per what Jaunty used but the only difference is the printer does not spew out as MUCH blank paper! I don't know where to troubleshoot on this - please could someone provide pointers as to how I can go about solving this?
Thanks
M

https://wiki.archlinux.org/index.php/Fo … ow_to_Post

Bumblebee is not work on Arch x86_64

when i install bumblebee on arch_i686 ,it works,
but i install it on x86_64 isn't work .
# pacman -S xf86-video-nouveau nouveau-dri mesa
# pacman -S lib32-virtualgl bumblebee bbswitch
# usermod -a -G bumblebee eveblue
# systemctl enable bumblebeed.service
# reboot
eveblue@Arch:~$ lspci |grep VGA
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
01:00.0 VGA compatible controller: NVIDIA Corporation GF119M [GeForce GT 520M] (rev a1)
how to solved it ?
Last edited by eve_ouyang (2013-06-25 04:06:14)

nourathar wrote:
Hi,
if you only followed the steps you quoted above, I'm more suprised by your suggestion that your nvidia is off on boot when you are on arch_i368.
'Default behaviour of bbswitch is to leave card power state unchanged', as is explained here:
https://wiki.archlinux.org/index.php/Bu … g_bbswitch
Did you configure bbswitch according to the steps outlined there ?
ciao,
J.
(sorry, misread the docs i realize now, and can't delete this post..:()
I use bumblebee and bbswitch and I did configure it in a bbswitch.conf as outlined in the link above, even when now I see it says that is not necessary when using bumblebee. Did you try that ?
thx,nourathar
but the bumblebee install will turn the Nvidia off,and I had read the wiki before and try myself to configure the bumblebee ,but it doesn't work.
I think ,are there some lib32* not install.
And sorry for my poor english.
Last edited by eve_ouyang (2013-06-19 09:43:22)

Consuming PI Webservice from Webdynpro Java Not working

Hello SAP,
Environment: CE 7.2.
Resolution expected immediately, Helpful answer is highly appreciated.
Is the namespace should not exceed 60char for PI Webservice, for executing the webservice from Webdynpro Java.
I tried with all the options in executing the PI Service from Webdynpro Java, None of the options worked. I am facing the below error while I was calling the PI Webservice.
I don't see any problem from Webdynpro Java, what ever the procedure I have followed is the standard procedure.
Fortunately when I execute the service from Webservice Navigator, it is working as expected. The same webservice when I consume it from Webdynpro Java it is not working
Options tried so far:
1) Published the Services to Service Registry and there by consuming the PI Service from Service Registry - Not worked
2) Tweaked the URL with few options - Not worked (Tweaking the URL, ex: portType, Binding)
3) Changing the Business Systems in PI and there after calling the service - Not worked
4) Initializing the code, instead of creating Service Controller and calling the PI Service - Not worked.
5) Created a Provider System and tried to call the PI Webservice from Provider System - Not Worked
For all the Options, I am facing the same error which is provided in the screenshot.
Below procedure which I have followed for calling the PI Webservice:
1) Created Adaptive Webservice Model
2) Provided PI Webservice URL (It prompts for PI System UserId and Password)
3) Selected Option - No Service Group Configuration
4) Provided Logical Destination
6) Completed creation of Model
7) Added the model as a UsedModel
8) Right Click on Comp Contr. and selected Apply Template and Created a ServiceController for the model (Entire mapping to comp contr, Initializing the nodes is taken care by Service Contr.)
9) Created an Template Action button and there by calling execute method which is auto rendered from CompContr..
10) Build the project.
11) Activated the code and Run the Application.
12) Getting the below error which is showed in the message.
ERROR MESSAGE:
Exception on execution of web service on destination 'GetPIHRPeopleData' for operation 'SI_CreateHRPeopleData_OS' in interface 'SI_CreatePeopleCompany_OS'

Hi Sankar,
If the webservice is working fine in the Wsnavigator then there is some problem with importing the webservice in webdynpro for Java. Please check the required parameter for creating the Adaptive Webservice Model. After adding in the used model and compoent controller binding, you need to write code for to execute the webservice model.
Please check the code for initialization and execution for the webservice and then test it.
Best Regards,
Arun Jaiswal

HELP! MY TRACKPAD IS NOT WORKING

GUYS. PLS HELP. MY TRACKPAD IS NOT WORKING IM USING BB CURVE 9300. IM FROM THE PHILIPPINES. BUT MY MOM BOUGHT AT SAUDI ARABIA. TODAY, IM PLANNING TO GO IN A SERVICE CENTER IN ORTIGAS. AS PER CONVERSATION TO THE CELLPHONE TECHNICIAN. IT WILL COST 800. IS IT TOO EXPENSIVE? HELP! IS THERE ANY OTHER WAY AROUND???

Use the tab key to navigate around the Bluetooth Assistance screen and the spacebar to enter/select.
If the tab key doesn't move to all controls then press Control FN F7 one times and try the tab key again.
Regards,
Captfred

HT1766 please help my ipad min is not working on the scren it says iPad disabled connect to itunes

please help my ipad min is not working on the scren it says iPad disabled connect to itunes

How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

Select * from tab is not working in oracle 10g

select * from tab is not working in oracle 10g. But at the same time,
select * from <<table>> is working.
Please advise me.

This works for me in 10.2.0.2
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
SQL> select * from tab;
TNAME                          TABTYPE            CLUSTERID
LOAN_DETAIL                    TABLE
PLAN_TABLE                     TABLE
...

Search help for cost center does not work after SP upgrade

Hi,
Create a shopping cart in SRM and go to the cost assignment tab. When click on the search help to enter a costcenter, we don't get any search help screen.
Thanks

Kindly check note: 1259735 Search help of generic account does not work
Additionally Check the 5th question/answer of note 815849.

When I unplug Apple headphones from my MacBook Pro sond from internal speakers not work, and system soud preferences displayed: Output: optical digital out port only

When I unplug Apple headphones from my MacBook Pro sond from internal speakers not work, and system soud preferences displayed: Output: optical digital out port only

If you see a red light in the audio output port, then the internal switch is stuck. Insert the earphone plug a few times and see if you can trip the switch. If that fails, insert a cocktail stirrer and the like and jiggle it around inside. If that fails, take it to an Apple store and have the technicians at the genius bar do it for you.
Ciao.

Need to re-install CS5.5 on my new hard drive. Serial number from disk package not working.

I need to re-install CS5.5 on my new hard drive. Serial number from disk package not working.

if there's a problem with the number of installations, you'll see a message about an excess activation problem.
if that's what you're seeing, contact adobe support for an activation count reset, https://helpx.adobe.com/contact.html
otherwise, attach a screenshot of the error message or quote it.

Get-MailboxSentItemsConfiguration Set-MailboxSentItemsConfiguration From Only (still) not working

Hello,
I would like to ask a question, hopeing it is resolved in some way and i missed it.
I have installed SP3 Rollup 4 on our Exchange 2010 server.
This added 2 new Powershell commands
Get-MailboxSentItemsConfiguration
Set-MailboxSentItemsConfiguration
This can be used to manipulate where mail is stored in the send items.
Sender - e-mails sent using SendAs or Send-on-Behalf-of permissions are saved only in the Sent Items folder of the Sender (UserA);
SenderAndFrom – e-mails sent using SendAs or Send-on-Behalf-of permissions are saved in the Sent Items folder of the Sender and the mailbox on which the permissions are assigned (in our example, both UserA and UserB);
From – e-mails sent using SendAs or Send-on-Behalf-of permissions are saved in the Sent Items folder of only the mailbox on which the permissions are assigned (in our example, UserB)
What we really want it to use the From only way.
We use a shared team mailbox and use that as primary, as a second mailbox users get a trusted non shared mailbox. Mail sent from the trusted mailbox should only be in the send items from the actual sender, not both.
2 sites report that the From field is reserved for Future Use, or bugged and does not work is intened.
Here is is stated on 1 July 2013
http://technet.microsoft.com/en-us/library/jj884078(v=exchg.141).aspx
From Reserved for future use. To save the messages sent as this mailbox in the Sent Items folder of this mailbox, use SenderAndFrom value.
That was on 26 March 2013
http://www.msexchange.org/kbase/ExchangeServerTips/ExchangeServer2010/OutlookOWA/sent-items-behavior-shared-mailboxes-update.html
NOTE 1: the From value does not work as expected... It basically performs the same action as the SenderAndFromvalue, meaning it saves the e-mail in both mailboxes. This is still the case in Rollup 5 v2.
We are on 3 March 2014 now, is this still bugged, did i miss something, or is there an ETA when this will be fixed ?
Looking foward to any replies.
Kind regards,
Jeroen van Velzen

I am using a shared mailbox (with a disabled account) where I get sent items and also deleted items placed in the right folders.
I think it’s just a matter of how you configure Outlook. It works well for me in both Outlook 2010 and Outlook 2013, cached mode and also online mode. You can add a shared mailbox to your Outlook profile in at least two ways where one of them doesn’t work
but the other does.
If you add the shared mailbox via the File tab/Account settings/New/ and just enter the e-mail address of the shared mailbox in the Auto Account Setup page. No name, no password, just the e-mail address and click Next and voila “Your e-mail account is successfully
configured”. After restarting Outlook you will find the shared mailbox below your own in the left pane.
If you click the inbox ones in the shared mailbox and then open a new mail you will see the shared mailbox display name in the From field. After sending the mail you will see the mail in the Sent Items folder of the shared mailbox. If you delete a mail in
the shared mailbox you will see it in Deleted items folder of the shared mailbox.
The prerequisits for this is that you have “full access” and “send as” rights of the shared mailbox.
This was accomplished without using the Set-MailboxSentItemsConfiguration command.
We are running Exchange 2010 SP3 RU4.

How can I open the Permissions Manager? I have tried using the directions from the help desk, but it does not work. Any sugestions?

I have done what the help desk said to by typing about:permissions in the spot you would type a webpage in, but it does not work. Help please.

'''about:permissions''' doesn't work in the version of Firefox you are using.
Exactly what permissions do you need access to?

HP Help Number for Windows 7 not working

I have a problem with my Windows 7 upgrade. The instructions from HP say that in the US to call 1-888-447-0150. That number answers, there is a beep and the line is cut off.
Why is the number given in the HP instructions not working?

Yes, it doesn't work for me either. It connects, then a very short music blip plays and it's then transferred to nowhere and disconnects.
HP has gone to the dogs!
My install of Windows 7 got to the last item on the list, about three quarters of the way through the install (the green bar) and has hung for about 10 hours now without a sign of movement, and HP is nowhere to be found to help.

Setting of "opening web pages from last session"not works when open next time

In Options, setting to "open windows & tab pages from last time" does not work. I have tries several time but nothing happens. have written to you earlier also , please help

''setting to "open windows & tab pages from last time" does not work.''
That would be very surprising but a change was made to Firefox 4 to always have the choice of going to History ("Alt+S") and choose "Restore previous session".
With Firefox 5 coming out in a few days (June 21-22) you might try again then, if the solution the developers built in does not work for you. Do you know about pinning tabs ('''app-tabs''') they persist across sessions as a convenience -- if I really want to keep something permanently then I would bookmark such things as a group. Because they can be closed easily.

RRI jump to BEx from EP is not working

Friends,
We have configured BI admin cockpit. When I click on any iView and then Go To->,
all the jumps to Web GUI (tcodes) are wroking fine. But jump to BEx web application is not working.
Go To-> Infocube Status : Analysis, * Analysis.. are not working. It shows "This page can not be displayed".
But those templates are available in the system.
If I try the same web applications from RSRT tcode, the RRI is working fine.
Please help..
Joe

Hi Joe,
Below link will helps you to solve the issue...
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a6c54319-0e01-0010-20a4-fb81ad32f330
If not please take help from your admin guys(Basis people)
Regards
Sudheer

[HELP] SpaceChem from Steam is not working on Arch x86_64

Similar Messages

Maybe you are looking for