Burn a Cd and the first song skips for a minute, but then the rest of the Cd is fine.

I use Memorex CD-R.. I haven't had this problem up until a couple weeks ago. I just burned 3 cds in a row and all of them had the first song skip... Any help would be great! Thank You!

Jennann,
First of all, it is better to use CD-Rs than CD-RWs, as the latter often give problems when used for audio CDs.
The problem you describe -- bad audio on the later tracks of an audio CD -- can almost always be corrected by doing the burn at a much lower burn speed. Use 2x.
The burn speed is selected in the dialog box that comes up when you request the burn.  It defaults to "Maximum Possible," but there is a dropdown to select a lower value.

Similar Messages

  • I got windows 7 and I downloaded itunes and at first it said it was incompatible but then i got it to work. Now all of a sudden my itunes won't open. It keeps saying it is incompatible. Again??

    I got windows 7 and I downloaded itunes and at first it said it was incompatible but then i got it to work. Now all of a sudden my itunes won't open. It keeps saying it is incompatible. Again??

    Try the following document, only be sure that none of the boxes in the compatibility mode tab are checked (not just the compatibility mode box itself):
    iTunes for Windows: How to turn off Compatibility Mode

  • I got a new Mac Pro and I am using my 30 inch cinema display.  It has been flickering grey sometimes and then will stay grey and I have to reboot... this is very annoying..help.  I have reset the pram and that seems to help for a bit but then it starts up

    I got a new Mac Pro and I am using my 30 inch cinema display.  It has been flickering grey sometimes and then will stay grey and lock up my computer and I have to reboot... this is very annoying..help.  I have reset the pram and that seems to help for a bit but then it starts up again...and please don't tell me to check for software updates:)

    I got a new Mac Pro and I am using my 30 inch cinema display.  It has been flickering grey sometimes and then will stay grey and lock up my computer and I have to reboot... this is very annoying..help.  I have reset the pram and that seems to help for a bit but then it starts up again...and please don't tell me to check for software updates:)

  • TS1717 I downloaded an album, and two of the songs play for about 10 seconds then it jumps to the next song on the album

    i downloaded an album from itunes store into my itunes library on my computer.  two of the songs downloaded a few seconds of music and then skipped to the next song.  only had partial downloads for a portion of the music.

    If your country's iTunes Store allows you to redownload purchased tracks, I'd delete your current copies of the tracks and try redownloading fresh copies. For instructions, see the following document:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    Otherwise, I'd report the problem to the iTunes Store.
    Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
    Find the items that are not playing properly. If you can't see "Report a Problem" next to the items, click the "Report a problem" button. Now click the "Report a Problem" links next to the items.

  • Why does iTunes rip the first part of a CD quickly, but then slows down for the last few - Why?

    I am trying to rip CD's into iTunes so sync with my iPhone.  When I currnetly rip the CD, it will rip the first 10 tracks in a matter of moments at 40x.  However, the last 4-5 tracks take forever - up to 20 minutes per track.  This has happened on multiple CD's and only with the v11.0.1.12. 
    Any advice out there?

    I am trying to rip CD's into iTunes so sync with my iPhone.  When I currnetly rip the CD, it will rip the first 10 tracks in a matter of moments at 40x.  However, the last 4-5 tracks take forever - up to 20 minutes per track.  This has happened on multiple CD's and only with the v11.0.1.12. 
    Any advice out there?

  • When using Earthlink email I cannot reply to a message. I could for the first 6 months I used it but about 6 weeks ago the problem arose. How do I fix it?

    I use email through a site called TheGrid.net which is a part of Earthlink.net. It worked fine with Firefox till about six weeks ago. Now when I am looking at an email message when I hit Reply or when I try to write a message, it won't let me. It brings up two blank boxes below the message heading. It won't let me enter data in the first box and when I type in the second box, which it will let me do, it will not accept it when I hit Send.
    I suspect you did an automatic update to Firefox when the problem arose. Can you help? Thank you.

    I too have this problem plus I can't even write email. I get no cursor in the write box. If I don't get an answer real soon I'm going to use Chrome where this problem does not occur

  • HT1212 My Ipad has been permanently lock because incorrect password has been enter too many times. Normally, it will ask to wait for 60 minutes but this is not available, the only option, it says to connect to Itunes.  I cannot connect to ITunes either.

    What can I do to unlock the IPAD if I cannot access the device by using computer? When I connect to computer, it says I have to unlock the IPad to connect to itunes.
    I try everything but I cannot figure out what to do. I turn off IPAD and it still stay in the connect to Itunes mode. It does not goes back to wait mode.
    Any suggestion would be appreciated.
    Thanks,
    Bill

    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • My imessage wont work, when i open it the screen turns white for a few seconds then goes back to the home screen

    WHEN I OPEN IMESSAGE THE SCREEN BLANKS WHITE AND AFTER A FEW SECONDS CLOSES IMESSAGE AND GOES BACK TO HOME SCREEN!!! HELP ME I HAVE NO IDEA WHAT TO DO!!!!

    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Go to Settings>Messages>Send and Receive and sing out and sing back in
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.

  • I have Downloaded A Album by Rhianna and after 40 seconds of playing the first song it skips and goes onto the other song on the album , how do i fix this ?

    I have Downloaded A Album by Rhianna and after 40 seconds of playing the first song it skips and goes onto the other song on the album , how do i fix this ?

    Delete the song from your library and re-download it from the Purchases section of the iTunes Store.
    http://support.apple.com/kb/PH12491

  • Import CD only importing about 1:30 of the first song of the album and skipping the rest...

    Import CD is only importing about 1:30 of the first song of all of my albums, and then none of the others - though it says they've been ripped (with the little green symbol next to the track name), the track time says "not available" in my library. I've tried to import over a dozen CDs, all the same. Any ideas? I've installed, un- and re- installed Itunes a bunch of times, tried older versions...

    good evening, your majesty!
    no especially focussed advice, i'm afraid. but this document is usually worth checking:
    http://docs.info.apple.com/article.html?artnum=93453
    ... and these resources may also be helpful:
    http://docs.info.apple.com/article.html?artnum=300252
    toonz, "Where to find firmware for your CD/DVD drive", 05:55pm Apr 15, 2005 CDT
    ... but if no joy there, head here to check for other documentation and to submit your CD diagnostics to Apple:
    http://www.apple.com/support/itunes/windows/cddiagnostics/
    ... and keep periodically refreshing your thread here with a post so passers-by might be able to update you on any new developments.
    love, b

  • I down loaded an album and the first song is blank.

    I downloaded an album and the first song is blank.  It looks like it is playing, but there is nothing there.  I don't loaded another song and it does not even attempt to play. It just skips over this song.  I am afraid to buy anything else until i get this fixed.  What is wrong and how can i fix this?

    Sorry, I meant to say i downloaded another song instead of don't.

  • When I try to play a song on my iPod Touch, it shows the information screen for the song and then skips to a new song but then goes back to the main playlist page without ever playing a song! Help!

    When I try to play a song on my iPod Touch, it shows the information screen for the song and then skips to a new song but then goes back to the main playlist page without ever playing a song! Help!

    thats tough man, yeah exchanging it is the best option. But why do people always leave a message saying" i'll probably just by an ipod" and it's usually followed by, "even though i don't like apple or ipod" . I mean fine, if u feel like giving up on the zen micro thats fine, i personally don't care if you're going to buy an ipod. for god sakes ipod isn't even the next alternati've mp3 players, theres plenty. Are u just trying to get the creative people saying "oh man we lost another one to ipod" cuz i'm sure they don't lose sleep over u wanting to buy an ipod instead of a zen. *done ranting*
    Message Edited by bleakreserve on 02-3-2005 06:34 AM

  • I received an ipod touch 5th gen for Christmas.  The first songs i've downloaded and synced with my touch have created ghost songs.  They are only on my computer in itunes once but appear on my ipod twice, one copy that won't play.  I can't delete them

    The first songs i've downloaded and synced with my new touch have created ghost songs.  They are only on my computer in itunes once but appear on my ipod twice, one copy that won't play.  I can't delete them.  I've tried unticking all the music that was on the ipod via itunes and re-syncing, which in theory should delete all music from my ipod.  It does except for the 5 ghost songs.   So at present I have no music on ipod except the 5 ghost songs.   Has anyone got any ideas how I can get rid of these?  
    I had no problems with my ipod touch 4th, which I had for years.   Any help would be great.  

    iOS: Device not recognized in iTunes for Mac OS X
    Or
    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or                     
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - Then do the other actions of:
    iOS: Device not recognized in iTunes for Windows
    paying special attention to item #5
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates
    - Try on another computer to help determine if computer or iPod problem

  • My iPod wants to play music half way through one song and then start the next one, or pick up in the next song were the first song was at.  How do I fix this?

    I've had it for the past few days that when I have a album playing it will play a song half way through and start the next one, however it still shows the first song name and the time that is on there.  I don't know weather it's just a glich in the iPod itself or if there is something wrong with it all together.   I've never had this problem up until a few days ago, and I really don't know what to do about it.

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync all music and resync
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                             
    - Restore to factory settings/new iOS device.

  • I recently transferred my ITunes library to an external hard drive.  I made sure to copy all the data from the saved location.  After the transfer I noticed that a lot of albums are missing the first song and some recently purchased albums are missing.

    I recently transferred my ITunes library to an external hard drive.  I made sure to copy all the data from the saved location.  After the transfer I noticed that a lot of albums are missing the first song and some recently purchased albums are missing.  Is there any way to recover the data?  Thanks for any help.

    I may have found an answer here:
    http://www.ilounge.com/index.php/articles/comments/moving-your-itunes-library-to -a-new-hard-drive
    They only thing I can assume is that my external hard drive was slow to start and iTunes defaulted to its old directory (see the last paragraph at the link above). However, once my external was recognized shouldn't everything have fixed itself?
    Message was edited by: williamson42
    Message was edited by: williamson42

Maybe you are looking for

  • Insert and update a data block which is based on view--urgent help required

    Hi experts, I created a view(A_VIEW) which is based on a union select. I have created a data block A_VIW_BLOCK which is based on this view. I need to insert/update one of the base tablesfor A_VIEW through this data block. I also need to be able to ma

  • Low volume on Face Time

    There seems to be a change in the volume during a Face Time call. The person I call says that they can barely heare my voice. This started happening after having had a few calls that had good volume. I have even tried the "Voice Memo" feature -- VU m

  • How can i transfer my new purchased itunes apps to my itunes library

    actually having several problems, installed itunes on a new computer, have transfered/sync all of my existing ipod touch apps/music successfully. I purchased new apps and a movie, but they do not appear on my itunes library, how can i transfer these

  • Shipping Location for Dropship Order - how will supplier know?

    Hi I was testing dropship flow. I have created a SO with source as external. Got Requisition created, which in turn created PO succesfully. Now, my question is, looking at this PO, how would my supplier know that it is a dropship PO? As of now, PO is

  • Missing Tabs in TOC

    Hi there, I'm going batty trying to figure out why the reference page is not inserting tabs into my TOC as specified.  Working in structured FM 10, and all of the reference pages, and formats are the same for all files.  I am auto-generating the TOC