Burning issues and yes i know this has been posted up before

Ok , just like some indicated before that my itunes use to burned perfectly on maximum speed , so after a while i had a few problem in burning it would start burning then 10-20 sec it would say disk error or something like that and i would lose the recordable cd i inserted . So i went to 4x to see if maybe that would fix it but , the same dam thing happens and happens over and over making me lose recordable cd's again! without warning ! Can i some how fix this by cleaning maybe the lens with a cd lens cleaner or will that mess up my lense on my mac osx? How can i fix this problem ? thanks

I would suggest first having a look at How do I clean my CD recorder? I would have to say that you should never have to clean a CD or DVD drive, and if you really really really can't resist, try using some canned air using extreme care.
If you don't already have canned air, and don't have any other optical drive "snake oil" remedies, then I would say the likelihood of effecting a sound repair based on investment in such would not be in your favor.

Similar Messages

"no un-bridged adapter" - and yes, I know this has been asked many times before :)

OK, so I installed vmware workstation 10 on windows 8.1 update. I got the above error. "No problem" I thought, and followed the community and googled advice, I:
1) uninstalled vmware
2) disabled my antivirus (Kaspersky)
3) ran the installer "As administrator" (I'm a member of the local administrators group, so hopefully anything else that doesn't require elevated permissions would be OK)
Result: Virtual Network Editor does not show VMnet0, but I see it in C:\ProgramData\VMware\netmap.conf
#This file is automatically generated.
# Hand-editing this file is not recommended.
network0.name = "HostOnly"
network0.device = "vmnet1"
network1.name = "NAT"
network1.device = "vmnet8"
network2.name = "VMNet0"
network2.device = "vmnet0"
Looking at the properties of my network adapter (Intel(R) Ethernet Connection I217-LM) I see the vmware bridge protocol and the vmnetbridge service is running.
So next I try the "restore defaults" in the network editor - no change. I try removing the protocol from the adapter and I get error 0x80070005 but if i click OK and go back into the properties, it's gone. I can't add it back, because I'm told it's marked for deletion. So I reboot, try to add it, and I get access denied, but again if I close the dialog, and go back, the service is now there.
I'm just in a workgroup and i have not applied any Group Policies...
Happy to try any suggestions...

Uninstalling AntiVirus and or EndPoint Security software has been discussed a considerable number of times and has been discussed for many years and uninstalling any given AntiVirus and or EndPoint Security software is SOP when dealing with some issues with VMware Type 2 Hypervisors, especially when there are Network related issues. At times both Avast and Kaspersky as well as others have been mention in these forums and at times in the product release notes too.

Java and runescape - I know this has been touched on before

Hey so I'm not very good with computers but I'll attempt to explain the situation. I am on a Mac OS x 10.5.8 and the Javas I have available in my preferences are: Java SE 6 ; J2SE 5.0; J2SE 5.0; J2SE 1.4.2 in that order with only the SE 6 version checked. I have done a variety of trouble shooting seen in my other thread https://discussions.apple.com/message/16865411#16865411
However, I have tried to redo some of these steps and for instance now I can't even get to the java test page because the browser just freezes and I have to force quit. A few months ago I was able to use the www.runescape.com website perfectly fine and I don't remember making any changes that would affect this, but now when I go to load the game it says your version of Java is unavailable or old. However, no new software update for Java is in my update search off the apple icon. I don't think my problem is directly to the game developers with the website because more recently I was using a chemistry site for school that requires JAVA on an OWL school site and now any learning activities that use JAVA I can't do.. In September I had no problem with this site and then somewhere along the line in October November it stopped working.
So to summarize, I want to try and be able to play runescape but because this other site that uses Java was working and then also stopped working, giving the same message as old or unavailable, I think my problem is with JAVA not a specific site.
Thanks for your help in advance!

Hi Kdowns19,
I'm in the RuneScape Tech Support forum a lot. Other people with similar problems have posted there recently. I may be able to help you sort out the problems you're having with RuneScape. In your other thread I think Linc Davis was on the right track.
Apple stopped releasing updates for OS X 10.5.8 a while ago. Trying to play RuneScape through your web browser won't work anymore. Your Mac has 32 bit web browsers which will try to use 32 bit Java to start RuneScape. A few months ago Jagex changed the requirements for RuneScape. It was announced in the news section on their site that you now need at least Java 6 (also known as 1.6) Update 10. The 32 bit Java on your Mac is too old to run RuneScape.
There is hope. If your Mac has an Intel CPU and it is 64 bit capable then OS X 10.5.8 will have a version of 64 bit Java that is current enough for RuneScape. I read your other thread and saw that you do have 64 bit Java installed. You can play RuneScape if you download Jagex's Mac version of the RS client. The RS client will find your Mac's 64 bit version of Java and use it to run the game. You can get the Mac RS client by going to the RuneScape homepage, point your mouse at Game Info at the top to see the drop down menu, and then click on Downloads. On the next page click the download button that has an apple on it. It will download the RuneScape.dmg file. I've searched the web for a 64 bit web browser that will run in OS X 10.5.8 but I have not been able to find one.
After you start the game you may need to set the graphics options in RuneScape so that the game runs in OpenGL mode. Currently there is an issue with Software mode that causes your mouse clicks to be out of alignment with the position of your mouse pointer.
Also, you mentioned that the OWL school site is not longer working on your Mac. That is probably because you unchecked the other versions of Java in the Java Preferences menu. You disabled the 32 bit versions of Java on your Mac and now your 32 bit web browser can't find them when you go the OWL school site. If you go back to the Java Preferences menu and enable those other versions of Java then I'd expect that site to start working again.

FROZEN - yes i know this has been posted a zillion times.

Hey =]
well today my ipod became frozen with the "Do not disconnect" screen. i toggled the hold switch, held down the menu and play button, and did everything the support said. but theres no response. Is there any other tips besides letting the battery drain or taking it to some ipod place or something.
THANK YOUU <33

As I said in your other thread...
You are not resetting the iPod correctly.
To reset the iPod, hold down Menu+Select for 6-10 seconds (assuming you have an iPod nano/iPod with click wheel).
See this for more info...
Resetting iPod
btabz

I know this has been posted about before...

Trying to use Mail to recive my hotmail emails, and send emails et...
Sorry for reposting but after looking through the forum and downloading this plugin and following the ReadMe file i still can't get it working.
Does anyone know how i can set this up, previously once i had set it up and tried to recive mail it came up with a litte eroor triangle.
Any ideas? Thanks

Contact the developer httpdmail and see if they can help you.

I know this has been posted a few times but, High Pitch noises!!!!!!!!!

I keep getting wierd high pitch noises from the MOBO, I have tried to push in the MSI plate on the NB but it didn't stop the noise. But what I have found out stops it is kind of wierd.
If I go into any Windows Explorer window and right click on certain icons, (i.e. C: Hard Drive, the nVidia Ethernet Adapter, or my DVD-RW) the noise stops suddenly, but if I click off of the right click menu the noise starts back up again. I don't get it? Also if I use my mouse wheel and scrol up and down rapidly, the sound stops while I am scrolling, but once I stop it comes back.
I know that this has been posted a few times, but I still haven't found any way to stop the noise other than the ways above. So if anyone has/had the same problem and knows how to fix it, I would really appreciate it if you would share.
EDIT: I have also tried to return my CPU to stock speeds but there is still a noise.

Im sure this noise, is the copper coils around the components near the cpu socket.. its a known problem on MSI boards, where they start to resernate / vibrate.
I've seen two solutions, neither have i tried, as I don't have the problem, but they are pretty harmless.
one is to apply a small amount of superglue over the copper coils, allow to set and switch back on,, or a safer way (in my opinion) is to use some wax (or electical sealing wax).
see this post
High Pitch Sound Identified! Read more...

Render Error: -50 I know this has been posted about a lot

Hey folks! I understand that this question has been posted many times to the community, and while it is not my intent to waste anyones time (Tom Wolsky), I have not found a solution that works. Can anyone help me? I will monitor this feed to respond back as soon as possible if you have any questions.
Here is my system:
OS 10.9.4
Late 2013 iMac 3.1 GHz I7
16gb ram
317 GB free space on 1TB hard drive
Final Cut version 10.1.2
Compressor Version 4.1.2
Here is what I have tried (all have failed with Render Error: -50)
Turn off Background Rendering, Delete Render Files, etc.
Copying media to new project, event, library, re-export
Tried Multiple Presets in both FCPX and Compressor
Turned off app nap on both FCPX and Compressor
I am at a loss here guys and gals. I have seen some posts explaining that it may be a corrupt clip that needs to be removed. Is exporting individual clips to find the culprit my best option?
Thanks in advance,
Cory

CoryOhio wrote:
... that it may be a corrupt clip that needs to be removed. Is exporting individual clips to find the culprit my best option?
Any manual-converted .mts clips involved in your Project?
You could use FCPX' feature to export just parts/ranges of a Project to narrow down the culprit (export a half, ok? export a half of the oither half, ok? export...)

Communication Error - Yes I know this has been made.

As stated previously, I know these have been made before, by a lot of people. I have yet to find an answer that works. I have tried setting up new locations like the youtube video. I have tried to open said ports, and I have tried turning on UpNP and all of the other tricks. I still cannot get video chat to work. I will do my best to provide all info that I can to get this to work.
Obviously, this is the dreaded Communication Error, "You did not recieve a response from [name here]"
Current Specs:
Model Name: MacBook
Model Identifier: MacBook4,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Using Mac OS X 10.5.3
Router is a D-Link DI-624M.
This is all updated with firmware and is current (v2.5). Any help would be greatly appreciated, thank you.

Routers
The table below lists common household routers qualified for use with iChat AV. No additional configuration or port forwarding is required. There are two assumptions for using one of the listed routers:
1. There is only one router between your computer and your Internet service provider. If you are on a complex network, ask your network administrator about any routing issues.
2. That a firewall has not been enabled on the sending or receiving end of the iChat AV conference. Optional firewall features on routers may block ports, as may firewall software used on computers. See technical document 93208, "iChat AV: Ports That Need to Be Open Behind Firewalls".
Of course Port Forwarding says this
http://portforward.com/english/routers/port_forwarding/Dlink/DI-624/iChat.htm
For Pics where the firewall access is
http://portforward.com/english/routers/portforwarding/Dlink/DI-624/AIMTalk.htm
It will be worth checking if Ports need to be open to be allowed though the firewall.
9:53 PM Thursday; June 26, 2008

Yes I know this has been covered but not answered

Hi I have an IMac that is only a few weeks old with fully updated software on all levels.
Ok so I get that I had to go buy an external CD drive so that I can be old fashioned and still burn music from my CD's into ITunes. I get that I will have to replace my 5.1 surround sound speakers because Jacks and Plugs change over time.
What I cannot fathom is why this silly ISight camera just doesnt work on a chat site I have been a member of for years. Yes its a flash based chat room and no when you right click the ISight camera is not in the list there is only one in the list and it aint the built in one.
Can anyone tell me where I can go to find out how to control this camera - there is no camera or video control under the system preferences - I have ensured that Photobooth and other programs that may use the camera are off or logged out - I have googled extensively - I have even emailed the chat host...
Where can I get access to some camera controls or software that will enable the cam to talk with a broader range of sites??
Max

Ok so use  > System Preferences ... > Flash > Advanced to verify you have the latest Flash software update that is compatible with your system.
Ok so then also check  > System Preferences ... > Flash > Camera and Mic to verify that your Flash settings are not blocking the camera for the site(s) you want.
Ok so if your trouble continues after the above, see How to Troubleshoot iSight.
Ok so at this point, if your ONLY trouble in every user account you tested is with Flash-based camera sites, you need Adobe Flash Player Help.
Message was edited by: EZ Jim
Mac OSX 10.8.4

I know this has been posted before...

...but I can't find it. I'm having the %20 issue. If I go to the inspector and change the name to take out the space, it changes the appearance in the navigation menu. Is there another way to do this?

...but I can't find it. I'm having the %20 issue.
If I go to the inspector and change the name to take
out the space, it changes the appearance in the
navigation menu. Is there another way to do this?
Yes, forget the iWeb navbar and make your own navigation menu using ordinary hyperlinks. (There's no way to make the navbar items different from the page names without post-publication modification).

I know this has been posted before. - Deleted but it dosnt help me.

Hi there guys
In a flurry of activity my GF deleted my isync while we are on holiday,
I am a bit stuck I know there is a way to get Isync to work using pacifist and the install DVD. However my phone is pretty trashed and looking like it is gonna pack up any day, I should have sorted it before we left but now im a 1000 miles away and need to get Isync back ? is there anywhere i can download it? even an old pack?
Thanks

iSync is not downloadable separately for Mac OS X 10.4 and later.
If you download the latest Mac OS X 10.4.11 Combo Updater from Apple (the huge one), you might be able to extract and install the latest iSync from that using Pacifist.
This is not guaranteed to work, because OS X Updates don't always include all files needed to completely restore an application, but you may be lucky as iSync was updated from v2.0 to v2.4 during the 10.4 to 10.4.11 updates.

I know this has been posted before....red light

i have looked around the forum but i can't find any solution to this problem, i have the red light shining out of my headphone socket - i also have no audio coming out of my speakers and when i press the mute button the speaker icon comes up but with no bars beneath it. When i plug my headphones in i then get audio, but as reccomended in other posts putting headphones does not permenantly solve the problem. In other posts there was something about adjusting preferences in the control panel (where's the control panel)
the red light looks cool but i would much rather audio, thanks

first.... plug the headphones in, then wiggle the jack a little and that should give you audio back.....
second.... sys prefs are 4th down from the apple logo (top left of your screen)...
third..... take your comp to an apple store or call applecare to get your hw repaired..

I'm burning dvd's that won't play on a regular dvd player. What am I doing wrong? Are there some simple things to check to figure this out? (Sorry, I know this has been asked many times)

I'm burning dvd's that won't play on a regular dvd player. What am I doing wrong? They play fine on computers but not on dvd players. Are there some simple things to check to figure this out? (Sorry, I know this has been asked many times). Created in DVD studio pro.

Hi
Just my thoughts to add to the excellent answers above.
• BRAND of DVD used - Matters when doing Video-DVDs
Memorex, NoName etc cheap brands usually do NOT work
I only Use Verbatim (more organic dye in these)
• Type of DVD - matters
- DVD+/RW - usually results in problems
- DL-DVDs are more problematic than SL-DVDs
- DVD+R are a more modern sort - BUT PLAYS BADLY or not at all on older DVD-players
I only use DVD-R
• BURN SPEED - matters
- Best in iDVD app - IS NOT BEST at all but results in lot's of Burn Errors = Doesn't play well or at all
I set this down to x2 or x4 max.
Yours Bengt W

How can i increase the height of the navigation toolbar to make my persona more visible? adding toolbars puts them all below the navi bar and it looks weird. i know this has been asked many times but the answer's always "add toolbars".

How can i increase the height of the navigation toolbar to make my persona more visible?
adding toolbars puts them all below the navi bar and it looks weird.
i know this has been asked many times but the answer's always "add toolbars".

Look here.
http://support.apple.com/kb/index?page=answerlink&url=http%3A%2F%2Fsupport.apple .com%2Fkb%2FHT1495&answerid=16777216&src=support_site.home.search

So, I know this has been asked before. But, has anyone heard from Apple?

So, I know this has been asked before, but I'm just looking to see if anyone had heard from Apple on this at all. The minimum volume on my iPod Classic 160gb is too high, and I can't lower it. (AKA when I kill the volume, I can still hear music).
I called them today, but the rep was pretty useless. He even dropped the "well, just press pause" line on me. Took him a while to understand that when I'm in bed or studying, etc. the minimum volume is too loud, and I wanted to be able to set it lower.
The best workaround I've found so far is to buy headphones with their own volume control, but I just can't help but feel that someone shouldn't have to by additonal gear after buying this thing on account of such a basic feature exclusion.
Anyways, thanks for any help !

Wow, easy there company boy!
I've heard all of what you spit up before. And for your point of "Well, in several cases, people have complained (here in these discussion pages), that they expect the volume to be zero when turned to minimum position" that kind of ties in to why Apple should fix this.
And yeah....it's pretty much a given that "you and I have different interpretations of what constitues too loud" This is where the option to adjust the minimum volume comes in to play. (I relly feel bad for you. Honestly. Having to live everyday of your life this way must be just brutal)
The wording would be pretty simple too. " Be aware there are many instances of the minimum volume being too loud, so think twice before dropping a few hundred bucks on this"
And, you're right. It is horrible to 'whine' about being ripped off and asking if there is a possible fix for the issue. I really do apologize for that. I should just suck it up and not voice my opinion that this is not fair to consumers, and Apple shouldn't fix a known issue with a product.
I did reset & restore, I figured that was pretty much implied since I said I spoke to Support.
And I am not at all surprised that you would say "I - for one - am not surprised that Apple might say, "simply hit the pause button"." Again, I don't want it on muteReading your post made my eye twitch at least three times.
This is exactly the reason I was resitant to post on a forum. But, I got a good laugh anyways. Thanks guy!

Burning issues and yes i know this has been posted up before

Similar Messages

Maybe you are looking for