Bursting - OUTPUT sends one big report, instead of multiple individual ones

Bursting - OUTPUT sends one big report, instead of multiple individual ones:
Data File below - shows report has the proper tags for the PP_NUMBER; which should split the job into individula files to be email, instead it creates one large file and emails it to the last email account
Please help!
<BCG_PPINVOICE_UK_ALL>
- <LIST_G_PP_NUMBER>
- <G_PP_NUMBER>
<PP_NUMBER>PP100</PP_NUMBER>
+ <LIST_G_INVOICE>
<PP_TOTAL>-1965</PP_TOTAL>
<AMOUNT_BEFORE_START>0</AMOUNT_BEFORE_START>
<PP_INVOICE_CONTACT>HPA - Michael Palmer</PP_INVOICE_CONTACT>
<ADDRESS1>Porton Down</ADDRESS1>
<ADDRESS2 />
<ADDRESS3 />
<ADDRESS4 />
<CITY>Salisbury</CITY>
<COUNTRY>United Kingdom</COUNTRY>
<EMAIL_ADDRESS>[email protected]</EMAIL_ADDRESS>
</G_PP_NUMBER>
- <G_PP_NUMBER>
<PP_NUMBER>PP101</PP_NUMBER>
+ <LIST_G_INVOICE>
<PP_TOTAL>0</PP_TOTAL>
<AMOUNT_BEFORE_START>0</AMOUNT_BEFORE_START>
<PP_INVOICE_CONTACT>Imperial College - Prof Wells</PP_INVOICE_CONTACT>
<ADDRESS1>Level 3</ADDRESS1>
<ADDRESS2>Sherfield Building</ADDRESS2>
<ADDRESS3 />
<ADDRESS4 />
<CITY>London</CITY>
<COUNTRY>United Kingdom</COUNTRY>
<EMAIL_ADDRESS>[email protected]</EMAIL_ADDRESS>
</G_PP_NUMBER>
- <G_PP_NUMBER>
<PP_NUMBER>PP102</PP_NUMBER>

This is EBusiness - XML Publiser (Not Enterprise)
My Control file is as follows:
<xapi:requestset type="bursting">
<xapi:request select="/BCG_PPINVOICE_UKB_ALL/LIST_G_PP_NUMBER/G_PP_NUMBER/PP_NUMBER">
<xapi:delivery>
<xapi:email id="/G_PP_NUMBER/${PP_NUMBER}" server="localhost" port="25" from="[email protected]" reply-to="[email protected]">
<xapi:message id="/G_PP_NUMBER/${PP_NUMBER}" to="${EMAIL_ADDRESS}" attachment="true" subject="Becmanc Coulter Genomics - Prepaid Account Balance ">Dear Prepaid Account holder Please find attached the current statement of your account. If you have any queries regarding the statement, or wish to make a top up of the account please e-mail me directly at [email protected] Kind regards UK Finance Team</xapi:message>
</xapi:email>
</xapi:delivery>
<xapi:document output="output="PP_STATEMENT_${PP_NUMBER}"" output-type="pdf" delivery="/G_PP_NUMBER/${PP_NUMBER}">
<xapi:template type="rtf" locale="" location="xdo://XBOL.BCG_PPINVOICE_UKB.en.US/?getSource=true"/>
</xapi:document>
</xapi:request>
</xapi:requestset>
Edited by: user9015277 on Sep 3, 2010 10:29 AM

Similar Messages

  • How can I divide one big long track into several smaller ones?

    I have many mp3"s I imported or downloaded in my Library of lectures, sermons and speeches.
    How can I divide one big long track into several smaller ones?
    Any input would be great.

    lakergrl wrote:
    How do I split one very long track into several tracks (audio journal split into each day)
    http://www.bulletsandbones.com/GB/GBFAQ.html#exportsections
    (Let the page FULLY load. The link to your answer is at the top of your screen)

  • One big report, multiple views

    is it ok (as a good practice) in OBIEE Answers, when dealing with a complex BM, to build a big report with lots of dimensions and measures involved , and then create many views for that report, each using a limited number of dimensions / measures available in the report ?
    I have experienced a few cases when a complex report with multiple views displays incorrect results , while if creating simpler reports for each of the views the results are correct.
    and that seems to me because, on each of the small simple reports a correct sql query is generated, while on the big report OBIEE tries to achieve the requirements using just one or two much more complex (and with lower granularity) queries ( the result of which are are used by presentation layer to further compute -sometimes incorrectly- the values for each of the report views).
    sometimes even when I exclude a dimension column from all views (while is still present in the report) the sql query generated still use it.
    is this a normal behavior ? have anyone experienced similar issues ? I'm having some hard time explaining these to the users that create reports.
    thank you.

    Couldn't find anything in the documentation to support that , though. How to explain this to the report writers ? many times it is more convenient to them to just create a big report with lots of views...instead of many reports.

  • Why is premiere creating one really big clip instead of many smaller ones when I am trying to create multicam source sequences

    Ok I am trying to create multicam clips from a shoot.   I have 198 clips from two to three cameras and an audio source.   I have created multicam clips in the past by simply putting them all into one bin, selecting all, right click, Create multicam source sequence, and then it processes them and creates multicam clips for me to use to edit.
    I am doing that process now to only have PP make one really big clip instead of a bunch of little ones.   Help!  

    And the other thing I think of is that you opened up the multicamera sequence as a New Sequence From Clip, instead of Open in Timeline.
    That would give you one long flat sequence, but 198 panels if you opened it in your multicamera monitor

  • When sending email Apple Mail is sending from both accounts instead of only the one I send it from

    I have 2 mail accounts, one for me and one for my wife. When I now send mail it is being sent from both accounts instead of just the one it was sent from. How do I stop this and why is it happening? Nothing new has occurred and all updatees are current.

    Both accounts are Gmail accounts too. FYI

  • My email address was changed on Apple but the old one keeps appearing instead of my new one" The old one is obsolete.What can I do"

    I had to change the email address on apples site regarding this Ipad. After I changed my email address this unit keeps bringing up the obsolete address.What should I do?
    Any advice will be extremely Welcome !

    Apple ID: What to do after you change your Apple ID
    http://support.apple.com/kb/HT5796?viewlocale=en_US&locale=en_US
    iTunes Store: Associating a device or computer to your Apple ID
    http://support.apple.com/kb/ht4627
    iOS: Changing the signed-in iTunes Store Apple ID Account
    http://support.apple.com/kb/ht1311
     Cheers, Tom

  • One SAP R/3 to Multiple Business One (B1I) Sites

    Hi,
    I would really appreciate your assistance.
    I would like to confirm the various settings when you have one SAP R/3 system connected to multiple (3) Business One systems with B1i.
    In SAP R/3 we have created the following:
    Logical System:
    B1I00 First Branch
    B1I01 Second Branch
    B1I02 Third Branch
    We have created three RFC destinations:
    B1I00 with program ID B1IRFC00 and port A000000011
    B1I01 with program ID B1IRFC01 and port A000000012
    B1I02 with program ID B1IRFC02 and port A000000013
    Each RFC destination is linked to the IP address etc of the respective B1 System.
    We have created three distribution models with the message types and the various logical systems and production database:
    B1I00TOPD2
    B1I01TOPD2
    B1I02TOPD2
    The partner profiles has been generated and adjusted as per the documentation.  All relevant output conditions have been maintained.
    In the B1I setting of each site, we have maintained the following:
    SAP R/3 settings such as Application server, user ID, gateway etc.
    Sender partner and sender port is:
    B1I00 port B1I00
    B1I01 port B1I01
    B1I02 port B1I02
    Program ID is:
    B1IRFC00
    B1IRFC01     
    B1IRFC02
    Although both branch 1 and 2 can connect to SAP R/3 and SAP R/3 can connect to branch 1, the working connection of branch 1 stopped working as soon as we added the other two.
    Can you please confirm our settings?  Does the registration of the program ID happen with a test connection from the branch B1I system?
    Regards
    Martin van Wyk

    Hi Eddy,
    Thanks for your detailed answer.
    You are correct, I am talking about the program ID in R/3.  The documentation for a first B1 system is very good.  We are trying to determine what changes are needed when you add a second B1 to an R/3 system.
    We established that when you use the same program ID in the RFC destination, we get a conflict.  
    I would like to confirm that for a second B1 site, we need to create a different Logical system, use a different program ID and obviously use different partner details (customer etc.).
    When the program ID is not registered the test connection from R/3 to B1I doesn't work.  I have been able to register the program by simply doing a Test Connection from B1I to R/3.
    Regards
    Martin van Wyk

  • How to get the job output to be displayed/send in a report?

    Dear All,
    IHAC that have a couple of jobs which they all work fine and return the desired value, and now the customer wants to take the output of the jobs and place it in one big report?
    The jobs created are the daily health checks that the DBAs run. They would like to have all the output from all the jobs consolidated in one report to be sent to them every morning on their emails.
    Kindly advise if this is doable.

    There isn't really a way to redirect a job's output. Unless you try to dig it out of the repository. Trust me it will be a hell of a job to puzzle out the locations and SQL statements to get it.
    You might consider trying to migrate your jobs into reports (if possible). Reports can be redirected to e-mail recipients.
    Regards
    Rob

  • Default output device for ALV report

    Dear friends,
    Here there is a user requirement that he want print a particular ALV report in a
    perticular output device. and want to fix that output device for that report instead of changing everytime.
    Kindly suggest.
    Regards,
    Praveen Lobo

    Hi,
    This way system is expected to search for default printer. What I would recommend you to do is call transaction SP01 within the report and pass the initial screen parameter thru FM.
    Hope this lead, help you solve your issue!
    Reetesh

  • Big reports and errors

    I have to genarate realy big reports (10 MB or greater) using WebServices as data
    sources
    Is there any way of generating this report in parts and then marge this parts
    in one big report?
    If something fails (for example problems with network connection) I don't want
    to start all from begining, and I want to use same partial results of previous
    report genaration
    thanks for help
    Rafa³ Paj¹k

    In the current release of LD, if part of the query fails, the whole query fails.
    If you want to have the pieces individually, you will need to write individual
    XQueries for each part. You can create one result by assembling the parts in an
    XQuery that takes each of the parts as a Complex Parameter Type.
    http://edocs/liquiddata/docs81/admin/userdefineddatatype.html
    - Mike
    "Rafa³ Paj¹k" <[email protected]> wrote:
    >
    I have to genarate realy big reports (10 MB or greater) using WebServices
    as data
    sources
    Is there any way of generating this report in parts and then marge this
    parts
    in one big report?
    If something fails (for example problems with network connection) I don't
    want
    to start all from begining, and I want to use same partial results of
    previous
    report genaration
    thanks for help
    Rafa³ Paj¹k

  • Scheduled Report - Bug with Multiple Selection LOV parameter

    Problem:
    I have a scheduled report with a parameter that has it's "Multiple Selection" checkbox checked. I schedule the report with multiple values selected. When I receive the report via email, the report ran as if I only selected one LOV value instead of multiple values.
    Facts:
    1) Enterprise version 10.1.3.2.1
    2) When you run the report manually with multiple values selected in the LOV, it runs great with the correct dataset.
    3) This scheduled report does not have a Data Template.
    James
    P.S. - I searched this forum for other treads on this issue. I didn't find any. Sorry if this is a duplicate.

    I have this same problem, too.
    When I select multiple parameters on the "View" screen for a given report, everything works fine.
    When I schedule it, however, only the last parameter I clicked on (regardless of whether a select a range or multiple individual values) is passed to the query. The other selections I make are ignored.
    What gives? Am I doing something wrong? Is this a bug? Is there a workaround?

  • Can a single HID report descriptor support multiple touch screens with different sizes?

    Hi Experts:
    I have a question for specifying touch monitor sizes in the HID report descriptor:
    Can ONE HID report descriptor support multiple touch monitors with different sizes ?
    Thanks in advance
    leo

    My screen shot is from AA9, and I have seen that the UI for AAX is vastly different, but...
    Choose Paper Source from Page Size should be the "one-touch" solution your looking for.
    In my test, my Konica-Minolta Bizhub failed to detect the proper paper trays, but Acrobat correctly spooled the pages.

  • How to generate multiple output pdf's from one oracle reports

    how to generate multiple output pdf's from one oracle reports.
    I have a report where I have to generate more than one output files from the same report based on a parameter.
    Each output file is for each parameter.
    Is this possible in oracle reports, is so how ?

    You can better post your question in the reports forum instead of this pl/sql forum.

  • How do I send pictures from iphoto to a group via email instead of to just one individual? I can't type in more than one name or send the pictures to a group.

    How do I send pictures from iphoto to a group via email instead of to just one individual? I can't type in more than one name or send the pictures to a group.

    I had a similar problem in that my wife's iphone 5 could not send pics with imessage.  Had to set the settings to default to SMS or whatever.  After laboring many hours on the web I coincidentally was on the phone with the internet people to question my internet speed.  They changed the router channel, which is something that I am capable of doing myself.  After that, the pics go over imessage.  My own Iphone didn't have the problem.  We are both latest IOS 7.0.6.

  • One Big Ol' Report

    Ok Here Goes
    Here's my scenario - I have built several separate reports, and all have conditions on them so they only show based on a variable. They are matrix reports:
    EX:
    --Report 1 where PRODUCT CATEGORY = 'SHIRTS'
    (SHIRTS)
    PRODUCT          ATT1   ATT2   ATT3    ATT4      
    Cotton T-Shirt   Blue   Large  Cotton  Pre-Shrunk
    --Report 2 where PRODUCT CATEGORY = 'SHOES'
    (SHOES)
    PRODUCT     PRODUCT SUBCAT     ATT1      ATT2     ATT3      
    Boots       INDUSTRIAL         12 Hole    Y        NI have a list (shown as tabs) across the top of the page and the user can view any of the reports for that category. The list just sets the category variable. I did this because each report has a different set of descriptive criteria to show. Shoes show the number of eyelets and whether they are designated as safety shoes, but that wouldn't make sense in the context of shirts.
    My question is not about how to do the matrix reports, but rather how to get all of these report sections into one page and allow the entire set of pages to be downloaded to a PDF. Currently each small report can be downloaded to a PDF, but not the entire thing. Problem is I really can't do a union in the query because the number of columns I need are different, and the titles are dynamic.
    So does anyone have an idea (short of using Oracle Reports) to get multiple separate report regions to print to one big PDF?
    - 405 -

    Why do you hide yourself behind a number? That's actually not nice and fair. And then,
    you expect the others to help you with such a big thing.
    I don't know much about .pdf, allthough I think it would work there as well - with some
    HTML => XHTML => XSLT Stylesheet => XLS-FO to => PDF... conversions using FOP.
    However, to get this into an excel file would be a piece of cake.
    Denes Kubicek

Maybe you are looking for