Business area change on posted documents

Hi,
We have a plant which is non related to SAP. We will run a batch input session for uploading the vendor invoices(F-43) to update in SAP.
User gave some wrong business area, so many documents got posted. Now we need to change the business area in those documents.
Anyone have any idea, any programme to change business area.
Regards,
Chandrika.

Hi,
Thanks for your reply. The documents are many, to reset and reverse the documents we can do it mass reversals. But to post the same and clear the documents would take lot of time.
Is there any SAP Programme which can change the business area on posted documents, so that the above process can be avoided.
Thanks & Regards,
Chandrika.

Similar Messages

  • How to Update Business Area Field in Posted Document?

    Dear All,
    Pls tell me how to update Business Area in documents which are posted without entering Business Area field. Pls tell me how to achieve this without using Validations & Substitutions. Any table entries can be maintained for this? Kindly guide.
    Regards
    Abhijeet

    Hi,
    I think, you need to post mannually if you have the list of documents posted with out business area.
    ex:
    1.Before posting of accounting entry as below, you should deactivate business area component in OB65 againest your co.code
    2.Post accounting entry as below
    40   123456    without business area     100
    50   123456    with business area ABC  100
    3. Goto T.Code: OB65 activate the business area component.
    4. After posting of accounting entry like above you should run transaction F.5D and F.5E again, make sure that above entry not come again while executing F.5D.
    First you can try this process in dev client, if you are comfort with this process then follow the same in quality and production.
    Note: You can do this transactions in production client, only when there were no users working on the system.
    all the best
    Regards,
    Prasad

  • Can business area change when we post a clearing document?

    Hi all,
      Is it possible to change the business area when we post a clearing document?
      For example, we need to pay the line item that have business area 3000. Then we use transaction F110 to create a payment then a clearing docuement will be created with business area 3000. Can we configure it to change to Business area 1000 when we do the payment.
      I tried to implement a FI substitution but Business area field cannot be changed(OSS Note 42615). we can do that by changing standard program but it is not recommended by SAP.
      Any idea on how to do this? Configuration, BTE or any user exits? Point will be rewarded for any helpful answer.
    Thanks,
    Chaiphon

    hi raj,
      Could you please explain more about assignment and substitution? did you implement this before?
      I am in doubt because OSS Note 42615 said that GSBER (Business area) must not be substituted. Therefore, if you implement it and there is no problem, I will do the same.
    Thanks,
    Chaiphon

  • Business Area Changed

    Hi FI Experts,
    The User used the Upload program for Importing the Bank clearing entries from Bank . After uploading some of the posting documents  DR and CR entries of Business Area Changed . For DR and CR entry Business area should be same .
    Example :  After Importing the bank file .
    I got the following entry :
    Item  PK  Account            Assignment         Amount      BA
    1       50   761300              000978300          3000          XXXX
    2       40   761310              200067889          3000          YYY
    BA was diffrent .
    Pls anyone help me How resolve this Problem?
    Thanks
    Nathan

    Hi,
    Check the assignment of Business area  to your plant in OMj7 t.code.
    Also check any changes done to the table T134H in SE11 with regards to Business area.
    Regards,
    Biju K

  • Business area changes from one to another which results error in MIRO

    Hi Experts,
    I am creating an incoming invoice in tcode MIRO and it upon saving, the business area changes from one to another and this results to an error which displays, "Balancing field 'Profit Center' in line item 001 not filled."
    What is weird is that this error will be avoided if I enter the the business area in the invoice header details. But the line item will be posted to the second business area that I entered which is incorrect because this should be posted in the first business area.
    I already checked the configurations and have no idea what to do next.
    I hope you could help me solve this issue because this is crucial to our client.
    Thanks so much in advance and for your support,
    Larissa

    Hi Gaurav,
    Thanks! I found out that there is a profit center derivation exit that makes the posting incorrect.
    Thanks again.
    Larissa

  • Delete functional Area on a posted Document

    Hi,
    in Ecc 6.0 with New Gl Activated, can we delete functional area on a posted document. during cut over, a wrong FA was derived from the internal order and now it is causing issues in consolidations and so we need to delete the FA
    Regards
    Aashish Kedia
    Edited by: Aahsish Kedia on Aug 20, 2010 3:34 PM

    Hi,
    Please refer to the below OS note:-
    [https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=677630]
    It provides correction program ZFCORRFA_FAGL for correcitng functional area in FI documents.
    Regards,
    Gaurav

  • Business Area Not visible at document display

    Dear All,
    I have confi. document spllitting.  Posted documents with busines area and profit centre.
    But at document display business area filed is not appearing.
    Only Profit Centre is appearing
    Please let me know wht is the problem.
    Regards
    Partha

    Please let me what are the PCA reports??????
    Regards
    Partha

  • Business Area and Salary Posting

    Hi Experts,
    I have Maintained IT0001 with one Business Area. And in the cost element (WBS maintained in IT0027) Business Area is different. Now while posting some GLs are showing double entry (ex. Net Salary Payable). If I change business area same as WBS in IT0001, posting is correct. But client wants cost to be booked in one Business area and Liability to be booked in different business area. is it possible? if yes then how?
    please advise...
    Nasim

    any comment please

  • Business area change in cost center

    Dear Expers,
    Please guide me,
    How to change the business area in cost center master data,  which is having already data in that cost center,  any programme to change,  if i change B.A  what will happen,  any problem to old data which is posted with that cost center.
    Regards
    Chandu

    Hi,
    It is not possible or allowed to change the master data field: business
    area of the cost center once you have made postings to this cost center
    period.
    And normally it's also not possible to change business area during a
    fiscal year once there is already postings in this Fiscal Year.
    The reason is to make sure that there is no change within the fiscal
    year since you then would have different postings - cost center
    belonging to different business areas within the same fiscal year.
    Meaning that it is possible to change the business area for the next
    fiscal year like described in the long text of the error message KS134.
    The reason is that it is to avoid inconsistency update of the table
    (COSS, COEP, or COSP).
    To change business area,you should create a new period for the cost
    center with no postings to this new period and change BA then.
    But if you want to change BA during FY,please review note 62716
    as well as the requirements stated in the note.
    I hope it helps,
    Regards,
    MLM

  • Blocking of business area for further posting

    Hi
    We want to block a business area for any further posting into it.
    Pl. explain how to do that.
    Thanks
    shivaji

    Hi
    In T.Code OX03 ypu can delete the particular business area. Before deleting check whether you have the autorization for the same or not.
    If it is helpful to you plz assign points
    Regards
    Tapan Patro

  • Asset master business area change

    I upload legacy assets using one business area now my user want to change the business area. I checked in asset master  it is in display mode only. what i can do? with out creating any new asset and transfer the values.is there any way to update the business area in asset master.

    there is a mass change option in the environment tab, you could have a look at that.
    Have you looked at the config, to see which fields can be changed?
    Also, I think you can change time dependant fields, which I presume business area would be part of.
    What happens when you view the asset in AS02?

  • Checking for business area while posting

    i have to check for business areas balancing during posting document
    eg., when we get interest income from a bank account under business area X it should be credited to an account with same business area X.
    Dr Bank - X
    Cr Interest income - Y
    this should not occur
    so user wants to get a error message when the business areas does not match.
    Can any one tell how this can be done?(does fi validations help in this?)

    Hi,
    YOu can do it by using the exits/BADIs available with your transaction. Inside the enhancement you can write the code for comare and message.
    What is the transaction you use for that? Try for Exits in trnsaction SMOD and BADIs in transaction SE18.
    Regards,
    Renjith Michael.

  • Posting a credit memo in reference to a previously posted document

    Hi SAP gurus,
    I would just like to ask if there is a functionality in SAP re: credit memo postings wherein the system can refer to a previously posted customer document and automatically derive the values such as GL account, cost center and business area of the posted document to the new Credit memo being processed?
    Example
    Customer invoice:
    Dr   Cash (GL 100001, Cost center 1000, BA 1000)               1000
    Cr   Customer A                                                                  1000
    In the credit memo posting screen, upon inputting the document number of the invoice in the invoice reference, the client requires us that the GL account 100001, cost center 1000 and BA 1000 be derived automatically without manual encoding from the user. Meaning all they have to input is the customer number and the invoice reference (doc number). Is this possible? Thanks

    Hi
    The invoice ref field in credit memo posting is related only with the payment terms. The systems determines the payment term from the original invoices.
    This field should be either filled with the original invoice document number or "V".
    If the field is left blank, then the system always takes the payment term for credit memo as "Due immediately"
    I dont thing there is a provision for copying the line item details as per original invoice document.

  • FF67-Business Area Automatic Derivation

    Dear Experts,
    We have activated Business Area wise balance sheet. Kindly let me know if  there is any possibilities of deriving Business Area automatically in FF67 from the Payment Document no entered in "Bank Reference.
    Thanks !

    Hi Manya,
    I am not clear about your Question..in BRS-FF67, if you are using post with clearing for posting Area 2 and interpretation algorithm, then system will itself look for the Business Area in the posted document of either incoming/Outgoing Document and that Business Area would get derived for Main Bank Account posting based on Document Splitting Principles.
    But in case you want to achieve what you have stated for valid reasons that you may have, use User EXIT in Substitution and write your logic for derivation in the Exit.
    Regards,
    SAPFICO

  • Made automatic from the system to pick business area ?

    Hi
    For VAT GL account system is asking business area to entered manually, can this be made automatic from the system to pick business area ?
    Thank You
    Ramakanth
    Edited by: Ramakanth Ambala on Jul 24, 2008 10:07 PM

    Hi,
    I think there is no possibility of picking business area automatically in FI.
            But in CO u maintain the business area within controlling. This means that when you create cost center master records you need to specify the business area. CO objects such as, cost centers and internal orders aid account assignment, as the business area can be derived from the master data records. When you post primary costs to a cost center, the system determines the business area automatically from the cost center master data. This enables the costs to be assigned to the correct business area.
            Therefore, you do not need to manually set the business area in the posting document, as the system does this, and thus reduces the number of incorrect assignments to a minimum.

Maybe you are looking for

  • Adobe Reader 9.1 - Fatal Error : Acrobat failed to connect a DDE server

    Hi Everyone, I have some users telling me that when they try to open a pdf attachment in Outlook 2007. Nothing happens. The system just sits there as if you did not click on the attachment. If you wait long enought a popup box from adobe reader comes

  • File Size Reduction When Editing in Photoshop

    When using Smart Objects my DNG file sizes increase from 9mb to over 100mb after a few adjustments. I found that I can reduce the file size greatly, for example back to 9mb, by reducing the Image Size to, for example 300 x 400 pixels, without flatten

  • I´m connect my ipad with the apple tv.

    the first time all good, but the second time dont work, ipad run very slow and the apple tv dont have image. Please help me.

  • I cannot open final cut X

    I cannot open final cut. I got a message saying my HD was full and I needed to delete files in order to continue, so I did but since then I have not been able to open Final cut x. All I get is the mac loading wheel. Any ideas why I can't open it?

  • IPhoto ate my pictures

    I upgraded to iLife 08 with out hitch... until my photo's went missing 3 weeks later. I had 14,500 images in iPhoto ~300 were recovered from the original and modified folders. There were about 500 .jpg files that had the name of my pictures but the f