Business area does not reflecting in IT 0001

Dear Expert,
I have assign cost center to organization unit, then hire employee through PA40, so position assign into IT0001,
system pick up the cost center but does not reflecting the business area in infotype 0001.
i checked with FI consultant, there is proper intergation between cost center and business area.
Please tell me, how to resolved this issue.
Many Many Thanks
Urvashi 

Hi Urvashi,
You will get the  Default values for Company code, Personal area, Personal Sub Area and Business Area  because of Account assignment infotype - IT1008 - for your position or Org Unit
check from PO10 or PO13 and infotype 1008.
You will have PA value defaulted on IT 0000 screen and others defaulted on IT 0001 screen.
You can change these values on respective screens. A warning will be issued but you can overwrite them.
Regards,
HARANATH

Similar Messages

  • Business area is not reflecting in A/c doc

    Hi
    After creating the sales invoice when accounting doc is generated i can only see the business are for customer line account and sales receivable a/c, but for other accounts like service tax, edu cess, higher edu cess business area is not picking.(in FB03). In configuration we have assigned bus area to plant and division wise.
    Where to configure so that Bus Area shouls reflect in all line items in FB02.
    Regards
    Debasish

    Dear Laxmipati
    Thanks for the reply.But we maintain only one business area for one invoice as it is a service related  invoice and the invoice line item is always one.So there is no case of multiple bus area.
    Plz guide.......
    Regards
    debasish

  • Business Area Field not Update in VF02 for output tex

    Hello All,
    in vf02 transaction the business area is not populating in case of output tex,i already search the relavent document in sdn but its not working,i impliment the exit userexit EXIT_SAPLV60B_006 (member of enhancement SDVFX006). as referance of http://scn.sap.com/thread/3146034,but my exit is not at all triger i check all the things like the project is already activated and i also thing that we need to fiel the bseg-table for tha i wrote the code also, as refer to
    http://scn.sap.com/thread/3164333,please suggest to resolve this issue. in  note SAP Note 199886 it say its a stnd.behv .
    THANKS,
    Sam

    Hi,
      iam not sure how it can be checked but in FS00 you can compare both GL Accounts at - control in chart of accounts whether it is p& l account or Balance sheet account
    also check the field status group
    if you can compare both GL accounts you will get the answer
    If you are doing sales  order check whether the Business area is appaering in the order
    iam sorry business area does not come from material master,profit centre comes from material master

  • AR Down Payment Invoice Does Not Reflect in BP Master Data...

    We have placed a sales order for a BP. 
    We select payment means and accept the payment
      In the background a AP Down Payment Invoice is created
    When we view the BP master data - the account ballance window does NOT reflect this "down payment"
    If we select the golden arrow at account ballance, uncheck "reconciled transactions" you can see the payment and AP down payment and they clear each other out.
    The problem is that when the final invoice is created it is not obvious that a down payment has been received.  Even if you are simply working at the BP master data window, it is not obvious that a down payment has been received. I belive our process is correct because If you click the TDP box, the payment is listed and will be applied to the final invoice.
    It simply does not alert the user that a payment had been received. 
    What are we doing wrong?????\
    Thank you!
    Edited by: Andrew Bleier on Feb 4, 2009 1:27 AM

    Keith Taylor
    You are right this feature is only available in Version 2007A.  There account posting happen purely due to the pay SAP has been designed and the configuration of GL Accounts.
    To make fundametal change to the core product is very difficult if you explain me your business process exactly as you do, I could think of alternatives.
    Please let know.
    Suda

  • Business Area is not getting updated in "Main Bank Account" Line item (FF_5

    Hi Gurus,
    I am executing T Code: FF_5 for uploading the "Multi-Cash" Format. This transaction clears the Bank Clearing Account and post the entry to the credit of "Bank Main Account".
    Now while i had executed F110, the Business area was properly captured in the Bank Clearing Account Line item. But while executing FF_5, the Business Area is not getting captured against the "Main Bank Account" Line item.
    Can you please tell me how to capture the Business Area against the "Main Bank Account" Line item.
    Rgds,
    Prasad.

    Hi,
    1. In case of Business where payments are made centrally it is important to report
        Bank A/c Business area wise.
    2. However I have solved the problem by doing "Sustitution", and its working fine. The Business Area is getting updated against the Main Bank Account Line item.
    3. I am however getting one error while doing the upload in FF_5. The error occurs
       only if Business Area is a "required" field in Bank Account's "Field Status
       Group".
       Error: (00 298) Formatting error in the field COBL-GSBER ; see next message.
       But if I make Business Area as an Optional Field I am not getting an error and
       also the posting is done to Main Bank Account.
    Is there anyother method by which this error can be corrected.
    I have assigned 2 points for your inputs. Can you help me to solve this error as well.
    Rgds
    Prasad

  • Business Area is not  pulling for Balance Sheet Accounts

    Hi,
    For few Balance Sheet GL Accounts (From MM side), Business area is not pulling while doing MM Cycle. For other Balance Sheet GL Accounts (From MM side), system is pulling the Business area by default.
    I have checked all the Field Status Group configuration and all. Still could not find the route cause for this. Can any one help me why it is not pulling Business area for Balance sheet accounts when doing MM cycle.
    what should i do if system has to pull Business area for Inventory Related Balance sheet GL Accounts?
    Kindly Help me..
    Thanks
    Sunil

    Hi,
    in OMJ7, assignement were there properly. Still why i am not able to pull Business area for  Balance Sheet Accounts.
    I Can give one Clue: For Inventory Finished Goods, system is pulling Business area and for Inventory Raw material and Inventory Semi-Finished Goods system is not pulling the Business area.
    This is my problem...
    Thanks
    Sunil

  • Business area is not being specified in cost center master.

    Hello Professional friends,
    When i specify Business area in existing cost center master data, it appears an error massage -    "Field change Business Area is not possible (transaction data already exists)"
    I tried to change the validity by analysis Period, when i do this, it appears anothe error " No further processing (contact your system administrator)"
    Its user critical requirement that he want to specify business for all new and existing cost center.
    there is no problem with new cost center.
    Waiting for valuable suggestion.

    Hello,
    The rule is that if you make any actual or planned date within the current year, you cannot make any changes to any of the organizational units within the cost center master.
    From the next year, you can remove / change the business are within the cost center master, provided:
    You have to change the validity period of the cost center master by doing:
    Go to KS02
    Edit ==> Analysis Period
    put your cursor on the valid from e.g. 01.01.1900 and click F5 (the line gets selected and become blue)
    Click on Other Analysis period and then change the analysis period. The new analysis period must be starting with the first date of the next fiscal year.
    Now change or remove the business area.
    For this year, surely you cannot change the business area, since there postings.
    Do not try to write any ABAP program to change the standard in order avoid the business area change error, it would end up data inconsistencies.
    Thanks,
    Ravi

  • Query in MSS does not reflect selection on period

    Hi group,
    I have made a query in global area.  In MSS I am calling the generated program from the query.  This works fine.  However, the selection on period in MSS does not reflect on the report.  No matter what I choose, the report gives me the date period that I have set up in my variant in the background. 
    The selection screen for the report is the standard delivered with LDB PNPCE.
    I have tried different date setup in my variant, but no matter what I do, I am not able to choose dynamically period from MSS.
    Any help is appreciated
    Kirsten

    Solved this by saving the variant without passing values.

  • BAPI_BUPA_CENTRAL_CHANGE: Business partner does not exist

    Hello,
    I'm trying to change a business partner, which I created with BAPI_BUPA_CREATE_FROM_DATA.
    But I get the error message "Business partner does not exist"
    I do following:
    1. create the BP with the BAPI_BUPA_CREATE_FROM_DATA
         get the BUSINESSPATNER- number
    2. fire BAPI_TRANSACTION_COMMIT.
    In the SAP-GUI transaction BUP3 I can see my BP, ok
    3. I try to change this BP with BAPI_BUPA_CENTRAL_CHANGE
         and I get an error "Business partner does not exist"
    Why?
    I'm using JCO, I used to set BUSINESSPARTNER with and without leading zero - it doesn't work.
    Can some one give me an advice?
    Thanks,
    Sergej Berg

    Hi,
    The "VALID_DATE" should be set to the date of execution (at least this is what I'm doing in my system).
    If you execute it via SE37 you can give it in the format of DDMMYYYY, but if you are testing an IDOC via WE19 you have to give it in the format of YYYYMMDD.
    Enjoy,
    Ayal.

  • Busy greeting does not play when I am on another call

    My busy greeting does not play when I am on another call. My regular greeting plays. I called verizon and they gave me some **bleep** about how that feature doesn't work if you have call waiting. It USED to work for me and why do they promote it as a dfeature with their Freedom Essentials package that comes with call waiting? Does anyone know what is going on? I need this feature to work for me.

    Also in the cases of incoming calls or if you place a call and forget to dial *70, in many states you can use 3 way calling to click over and dial *70 to activate Tone Block while on a call. You will hear 3 short confirmation tones and will then be returned to your other call. HOWEVER, do this with care because in some areas there will be a charge for using the 3 way calling if you do not have a monthly subscription to it. In other states Verizon will permit you to use 3 Way solely for the purpose of activating Tone Block without a charge. So check to see what the rules are where you are beforehand.

  • Segment Builder: 'Business partner does not exist in target group'

    After having built a target group in the segment builder the following error message occurs: 'Business partner does not exist in target group'. What is meant by this error message and what has caused this error?

    Hi Mahesh,
    Are data sources based in infoset¿? If the are based in infoset u can do simple queries.
    I create infoset in t-code 'SQ02', once the infoset has been created u can go to 'Enviroment' --> Queries, and here u can created simple queries based in the infoset. With this tool u can check if this infoset has been created sucessfully.
    Hope it helps u.
    Regards,
    Mon

  • Header business data does not apply to item

    I have a document that i want to delete but the system won't allow me to do any changes due to error message we are receiving when entering this order "Header business data does not apply to item". Please help me reject the this order. By the way, the document is Debit Memo Request.
    Hope to hear from you guys. Thanks in advance.

    Hi Riyaj,
    To answer your questions:
    1. There were no preceding docs existed.
    2. I already put reason for rejection, however, there is a warning message that it cannot be deleted.
    3. I am creating a Debit Memo Request. I want to do some changes to this particular document but Information Message "Header business data does not apply to item" keeps on appearing.

  • Updating Flash Player Does Not Reflect In Add-Ons Manager or Plug-In Check

    The add-ons Manager shows I have Flashplayer version 11.3.300.265. The Plug-ins Check shows there is an update, and I downloaded and installed Flash Player version 11.3.300.268. Six times! Each time, the installation shows as successful on the Adobe site, but FF14 does not reflect the new version, and the Plug-in check continues to insist that the version is out of date.
    I had no problems whatsoever updating to the latest Flashplayer version in IE (8). But FF is once again giving me trouble with this.
    In addition, the add-ons manager shows a version of Flash 9.0.45.0, last updated Feb 20, 2007. There's a big red warning that it's out of date. This is in addition to Shockwave Flash (the correct one) and Shockwave for Director (which is current). It's been like this for awhile, and I disabled the antique version of Flash and it does not affect FF or Flashplayer performance.
    I tried deleting my plug-ins database, but I just get all the same info when it is rebuilt. Any suggestions or solutions would be appreciated.

    Such old version are usually located in the plugins folder in the Firefox program folder (C:\Program Files\Mozilla Firefox\).
    You can enable the plugin and verify the path on the about:plugins page.
    You can set the plugin.expose_full_path pref to true on the about:config page to see the full path of plugins on the about:plugins page.
    *http://kb.mozillazine.org/Issues_related_to_plugins#Identifying_installed_plugins
    *http://kb.mozillazine.org/about:plugins
    *http://kb.mozillazine.org/about:config
    It is best not to leave that pref set to true as it exposes that full path to web servers, so reset that pref to false after you are done with the about:plugins page.
    See "Manually uninstalling a plugin":
    *https://support.mozilla.org/kb/Troubleshooting+plugins

  • Compiled CHM File Does Not Reflect New Project Name

    I have read many of the experts' responses to posts and found them extremely helpful. However, I have not seen one that addresses my issue.
    I have RH HTML Version RH8. I renamed a project via 1) File - Rename Project and 2) Single Source Layouts - Primary Layout - Properties - Output Folder and File Name.
    Two problems are: 1) The Project Folder name still reflects the old project name and 2) The CHM file still reflects the old project name.
    As a result, the output Help that the user sees still has the old project name in the title bar.
    All generated files as well as the RoboHelpHTML Project File were changed to the new project name, just as the RENAME PROJECTS Help says it should. However, the CHM file does not reflect the new project name as it says it should.
    1) Can I change the Folder name that was created when I compiled the Help file to the correct name?
    2) Can I change the FILENAME in the SELECT OUTPUT FOLDER AND FILENAME  window?
    3) Can I / should I rename the TOC and Index filenames from the old project name to the new project name? (Help says that changing the project name does not change these file names and it didn't.) 
    Will any of these actions correct the problem? I appreciate any help you can give. 

    Welcome to our community
    Try File > Project Settings.
    And if that doesn't get it, try the Project Set-up pod, windows and change the Window Caption.
    Cheers... Rick
    Helpful and Handy Links
    RoboHelp Wish Form/Bug Reporting Form
    Begin learning RoboHelp HTML 7, 8 or 9 within the day!
    Adobe Certified RoboHelp HTML Training
    SorcerStone Blog
    RoboHelp eBooks

  • MIGO ERROR:- 10020 ORD belong to business area 1111 not 1112

    Hi All,
    I am facing an error while doing MIGO for an import PO. Error is below:-
    10020 ORD belong to business area 1111 not 1112
    Message no. KI188
    Diagnosis
    Account assignment object 10020, type ORD is assigned to business area 1111. You made an explicit assignment to business area 1112.
    System Response
    The posting row may contain only one business area.
    Procedure
    Perform one of the following actions.
    Make an explicit assignment to business area 1111. To do so you must set the "Business area" field as entry-ready in Customizing.
    Enter an account assignment object assigned to business area 1112.
    Change the assignment of 10020 to business area 1111. Note the document number and continue processing the document after changing the assignment.
    Interesting thing is that when doing MIGO in Dec 2010 not getting any error but when doing in Jan 2011 getting above error.
    Pls help
    rgds
    Awnindra

    Hi Dear,
                I feel that I have seen this problem before, can you please try to change the Controllin area in the SAP and then proceed with the T-Code.
    It might solve your problem..
    Regards,
    Yawar khan

Maybe you are looking for