Business Area is not visible
I have Discoverer 10g 9.0.4. The EUL is visible by a couple of accounts. Of the accounts that can see the Business Area, I can revoke the BA and it disappears from the user. I can then grant it back to the user and it is visible again.
With a new database account with the same database permissions as the other accounts, the business area is not visible. I can log in with one of the "bad" accounts I can see the EUL5 tables. I can see that in EUL5_ACCESS_PRIVS and EUL5_EUL_USERS these accounts should be able to see the business area but no matter what I do in Admin, nothing is visible. What am I missing?
I've even tried granting select on all EUL5 tables to public but that did nothing. I tried granting administrator access to these accounts but that didn't make the BA visible either.
I tried another desktop with Discoverer Administrator installed and tried granting/revoking access to these accounts but that didn't help either.
HELP! :)
I did the following as a test:
create user test_disco identified by test_disco default tablespace tools temporary tablespace temp;
grant connect to test_disco;
grant dba to test_disco;
-- Next, use Discoverer Administrator and grant access to the BA
-- Next logon as TEST_DISCO and run the select statement:
select b.ba_name
from EULOWNER.eul5_eul_users u,
EULOWNER.eul5_bas b,
EULOWNER.eul5_access_privs p
where u.eu_id = p.ap_eu_id
and b.ba_id = p.gba_ba_id
and u.eu_username = user
-- one row returned
-- Next, connect with Discoverer Desktop or Discoverer Plus as TEST_DISCO and unable to see any Business Areas.
What is going on?
Similar Messages
-
Business Area is not getting updated in "Main Bank Account" Line item (FF_5
Hi Gurus,
I am executing T Code: FF_5 for uploading the "Multi-Cash" Format. This transaction clears the Bank Clearing Account and post the entry to the credit of "Bank Main Account".
Now while i had executed F110, the Business area was properly captured in the Bank Clearing Account Line item. But while executing FF_5, the Business Area is not getting captured against the "Main Bank Account" Line item.
Can you please tell me how to capture the Business Area against the "Main Bank Account" Line item.
Rgds,
Prasad.Hi,
1. In case of Business where payments are made centrally it is important to report
Bank A/c Business area wise.
2. However I have solved the problem by doing "Sustitution", and its working fine. The Business Area is getting updated against the Main Bank Account Line item.
3. I am however getting one error while doing the upload in FF_5. The error occurs
only if Business Area is a "required" field in Bank Account's "Field Status
Group".
Error: (00 298) Formatting error in the field COBL-GSBER ; see next message.
But if I make Business Area as an Optional Field I am not getting an error and
also the posting is done to Main Bank Account.
Is there anyother method by which this error can be corrected.
I have assigned 2 points for your inputs. Can you help me to solve this error as well.
Rgds
Prasad -
Business area is not appearing in the FBL1N
Hello Experts,
Please give me your valuable suggestions for below issue.
Business area is not appearing for few transactions for particular vendor in TC: FBL1N, We are using Ecc 6.0. Please advice.
Thanks,
Ratnam VPlease review note 549182 FAQ: Business Area Accounting
in particular see point 3.
3. Question:
With customer and vendor items, why can you not enter a business area?
Answer:
Open items are assigned to business areas depending on the expense and
revenue items of the invoice.
Because of this dependency, open items can be assigned to several
business areas. Thus the assignment is no longer unique. There is a
function available in the balance sheet adjustment that enables a
subsequent assignment.
With a unique dependency, the business area is copied into the open
items not assigned to a business area during the posting of the
document.
Also consider SAP Note 41294 in this context. -
Business Area is not pulling for Balance Sheet Accounts
Hi,
For few Balance Sheet GL Accounts (From MM side), Business area is not pulling while doing MM Cycle. For other Balance Sheet GL Accounts (From MM side), system is pulling the Business area by default.
I have checked all the Field Status Group configuration and all. Still could not find the route cause for this. Can any one help me why it is not pulling Business area for Balance sheet accounts when doing MM cycle.
what should i do if system has to pull Business area for Inventory Related Balance sheet GL Accounts?
Kindly Help me..
Thanks
SunilHi,
in OMJ7, assignement were there properly. Still why i am not able to pull Business area for Balance Sheet Accounts.
I Can give one Clue: For Inventory Finished Goods, system is pulling Business area and for Inventory Raw material and Inventory Semi-Finished Goods system is not pulling the Business area.
This is my problem...
Thanks
Sunil -
Business area is not being specified in cost center master.
Hello Professional friends,
When i specify Business area in existing cost center master data, it appears an error massage - "Field change Business Area is not possible (transaction data already exists)"
I tried to change the validity by analysis Period, when i do this, it appears anothe error " No further processing (contact your system administrator)"
Its user critical requirement that he want to specify business for all new and existing cost center.
there is no problem with new cost center.
Waiting for valuable suggestion.Hello,
The rule is that if you make any actual or planned date within the current year, you cannot make any changes to any of the organizational units within the cost center master.
From the next year, you can remove / change the business are within the cost center master, provided:
You have to change the validity period of the cost center master by doing:
Go to KS02
Edit ==> Analysis Period
put your cursor on the valid from e.g. 01.01.1900 and click F5 (the line gets selected and become blue)
Click on Other Analysis period and then change the analysis period. The new analysis period must be starting with the first date of the next fiscal year.
Now change or remove the business area.
For this year, surely you cannot change the business area, since there postings.
Do not try to write any ABAP program to change the standard in order avoid the business area change error, it would end up data inconsistencies.
Thanks,
Ravi -
Business area is not reflecting in A/c doc
Hi
After creating the sales invoice when accounting doc is generated i can only see the business are for customer line account and sales receivable a/c, but for other accounts like service tax, edu cess, higher edu cess business area is not picking.(in FB03). In configuration we have assigned bus area to plant and division wise.
Where to configure so that Bus Area shouls reflect in all line items in FB02.
Regards
DebasishDear Laxmipati
Thanks for the reply.But we maintain only one business area for one invoice as it is a service related invoice and the invoice line item is always one.So there is no case of multiple bus area.
Plz guide.......
Regards
debasish -
Business Area is not flowing to Billing Doc Line item
Hi,
Since recently we have observed that in some billing document creation, the business area in sales order line item is not flowing to the billing document line item.
VBRP-GSBER remains blank due to which we face problem in J1IIN txn.
This is not happening in all the cases. There are very few instances where business area is becoming blank in billing document line item.
But when the same billing document is reversed and new billing document is created, the business area flows properly to billing document line item (in VBRP).
Can anybody suggest why such erratic behaviour? And how to resolve the issue?
Thanks and Regards
RatnaDear Shiva Ram and Srinath,
Thanks for your reply
I had checked the settings in SPRO. These are OK. The sales order line item is deriving business area properly. But in some cases (not in all the cases) the business area is not flowing to Billing Line Item during billing document creation. It is happening in production server and not in development server.
I intend to use user exit userexit_fill_vbrk_vbrp to fill the VBRP-GSBER col with VBAK-GSBER if VBRP-GSBER is blank during saving the sales bill thro VF01..
Pl. suggest.
Regards
Ratna -
Error: Regarding Business area in not assigned to cost center
Hi Expert,
while saving the WBS , getting error message that business area is not valid for this cost center, even after mapping business area in to cost center in KS03. still getting this error. and check all cobination between business area and cost center is correct..please guide some one how to correct it.Hi
CrossCheck in OKB9 Account Assignments -Detail per Businessarea/Val.area - check for the cost center to which Val.area it is assigned. change it as Per your requirments.
this will solve your issue.
Thanks
Goutam -
Business Area Field not Update in VF02 for output tex
Hello All,
in vf02 transaction the business area is not populating in case of output tex,i already search the relavent document in sdn but its not working,i impliment the exit userexit EXIT_SAPLV60B_006 (member of enhancement SDVFX006). as referance of http://scn.sap.com/thread/3146034,but my exit is not at all triger i check all the things like the project is already activated and i also thing that we need to fiel the bseg-table for tha i wrote the code also, as refer to
http://scn.sap.com/thread/3164333,please suggest to resolve this issue. in note SAP Note 199886 it say its a stnd.behv .
THANKS,
SamHi,
iam not sure how it can be checked but in FS00 you can compare both GL Accounts at - control in chart of accounts whether it is p& l account or Balance sheet account
also check the field status group
if you can compare both GL accounts you will get the answer
If you are doing sales order check whether the Business area is appaering in the order
iam sorry business area does not come from material master,profit centre comes from material master -
MIGO ERROR:- 10020 ORD belong to business area 1111 not 1112
Hi All,
I am facing an error while doing MIGO for an import PO. Error is below:-
10020 ORD belong to business area 1111 not 1112
Message no. KI188
Diagnosis
Account assignment object 10020, type ORD is assigned to business area 1111. You made an explicit assignment to business area 1112.
System Response
The posting row may contain only one business area.
Procedure
Perform one of the following actions.
Make an explicit assignment to business area 1111. To do so you must set the "Business area" field as entry-ready in Customizing.
Enter an account assignment object assigned to business area 1112.
Change the assignment of 10020 to business area 1111. Note the document number and continue processing the document after changing the assignment.
Interesting thing is that when doing MIGO in Dec 2010 not getting any error but when doing in Jan 2011 getting above error.
Pls help
rgds
AwnindraHi Dear,
I feel that I have seen this problem before, can you please try to change the Controllin area in the SAP and then proceed with the T-Code.
It might solve your problem..
Regards,
Yawar khan -
Business area is not updating when allocating stock to sales order
Dear Experts,
When ever we allocating/dislocating stock in MB1B with 412E and 411E movement type,business area is not updating in the
accounting documents.but we assigned business area to plant in the customization.its happening to our Depot,for remaing plants its working.
Regards,
Varunplease suggest me right forum to post the issue.
Regards,
Varun -
Business area is not picking into delivery.URGENT
Hi Guru,
I created order with 3 material one material belongs to different plant. So I created two delivery for one delivery business area is picking and for other business area is not picking in delivery document so I am unable to do PGI it's giving error message that Business area is requred for G/L acct.hi,
not to confuse yourself. see these steps to determine the business area.
1. define the business area - ( link that with your division.)
IMG=ENTERPRISE STURCTURE = FINANCIAL ACCOUNTING= DEFINE BUSINESS AREA.
2. assign that your salea area. thru the same menu path but in assignment under sales and distribution.
3. maintain the rules by sales area as 2 for your sales area.
after all this, u try it , it will be determine your requirement.
reward points if it is useful.
regards
KR -
Business Area is not inheriting from Org.Unit or Cost Centre
Hi
Business area is assigned to Org.unit in IT1008, when I executing the action business area is not defaulting / Inheriting from Org.Management.
Any one could help me to solve this issue.
Thank you.
BachiIt seems OM and PA are not integrated, are they?
RHINTE20 is the report can bring data from OM to PA. -
Business area is not Populated in Set off account During MIRO.
Hi All,
I have some issue in MIRO. I have Service tax set off account. When i do MIRO Business area is updated in Vendor Line item, Provisional Items and even in Withholding TAX line item(TDS) but System does not show Business area in SERVICE TAX SET OFF line item.More over , when i see the document in FB03 , in Entry view no business area is there for SERVICE TAX SET OFF but When i see the GENERAL LEDGER view business is there.
Screen shots :
Entry View :
General Ledger View :
please help.
Thanks,
Karandeep bhagat.Hi Mukhthar ,
Thanks for quick response.
I have define the substitution as :
Prerequisite :
Company Code = 'XXXX' AND Tcode = 'MIRO' AND Document Type = 'RE' (For MIRO) AND Plant = 'XXXX' AND G/L Account = 'XXXXXXX' ( SET OFF ACCOUNT)
Substitute:
Business area = 'XXXX'
But it doesn't work.
Please suggest.
Thanks,
Karandeep Bhagat. -
Business Area & Plant not picked in CIN entries while doing MIRO
At the time of performing MIRO, the automated entries related to cenvat clearing account for excise in CIN are made by system.
At the time of excise capturing the Business Area and Plant are picked up at line item for Cenvat Clearing Account.
But at the time of MIRO the Business Area and Plant are not picked at line item for Cenvat Clearing Account.
The client requires the segregation of the entries on the basis of Plant / Business Area.
Regards
DharmveerGB01 is the table where you define it.
and for documentation u can start from:
http://help.sap.com/saphelp_47x200/helpdata/en/27/06e23954d9035de10000000a114084/frameset.htm
use various links in this page, u can know everything abt substitution.
Regards,
anantha
Maybe you are looking for
-
Error while opening SCDPM 2012 r2 console
Hi, on a new SCDPM 2012 R2 UR3 console only the user that performed the installation is able to open the console. All other users are not able to. Those other users are members of local admin group and some also sysadmin on DPM instance of SQL Server
-
When selecting a new doc or template. Also, Tools, Customize produces a MS Visual C++ Runtime error
-
Hello everyone! I'm working on a application to search files. I have some pdf documents and i want to be able to search in plain text and above all in the keywords associate with each file (visible with "right-click -> properties"). I didn't find sol
-
Interactive–Fade In / Fade Out
I am working on creating an interactive map. When a button is clicked a circle graphic fades in. When the same button is clicked I want the graphic to fade out the same way. I can only figure out how to make the graphic instantly disappear instead of
-
Use 2 jre versions (Java 5.x and Java 6.x) on diferent web pages.
On windows XP SP3. I need use on internet explorer 7 and firefox 3, 2 differents JRE versions for two diferent servers example: - "www.site1.com" needs java 5.x (don't work with java 6.x) - "www.site2.com" needs java 6.x (don't work with java 5.x) If