Business area not updating automatically.

Hi Gurus,
Business area is not getting updated when a transaction is posted thru PO/SD process. BA is getting updated only for line items i.e. FI-MM(GL maintained in OBYC) and FI-SD(GL maintained in VKOA) but the same is not happening for line items for TAX CODES (i.e. GL maintained in OB40).
Because of which BA wise B/S & P/L is not getting tallied.
Please suggest is there any program thru which we can update the same and view BA wise balalnce sheet.
Thank & Regards,
Praveen R Marati

hi, i sorry to say,
tax accounts means, as per as my knowledge
tax payable account, tax receivable or tax pool account, these accounts are balance sheet account.
these accounts u can easily update tax catagories. if i m wrong let me know please
regards
raj

Similar Messages

HT5181 iPhoto for iOS: Photos in iphoto's Camera Roll folder are not updated automatically with edits from other programs

How can I solve the problem în the subject?

How can I solve the problem în the subject?
What exactly are you trying to do?
Have you been editing photos in iPhoto and want to add them to your camera rool or photo stream?
Then do exactly as the article describes, that you lonked to:
iPhoto for iOS: Photos in Camera Roll are not updated automatically with edits from iPhoto
Use iPhoto's Sharing to save a copy of the edited photo to the Caera Roll, or explain on mor e detail, what you want to do.
Regards
Léonie

HT204053 My devices, iPad and iPhone, are not updating automatically with pages. Any suggestions. They use to about one week ago.

My devices, iPad and iPhone, are not updating automatically with pages. Any suggestions. They use to update beautifully about one week ago. I took my MacBook Pro to the Apple store for software issues, and I been having updating issues. Little help please.....

Welcome to the Apple community.
Check all your devices still have documents and data syncing turned on in settings > iCloud and that iCloud is enabled at settings > Pages. If this doesn't help, reset documents & Data from a computer at...
iCloud.com

ITunes: podcasts are not updating automatically

Hi,
My podcasts are not updating automatically in iTunes as they as they should.
My Mac and iTunes are running 24/7, so iTunes it always running. The update interval of the podcast is set to hourly, latest iTunes, latest Mac OS X.
The podcast actually does update if I re-start iTunes or, if I manually update the podcasts (there is always the latest 1 or 2 daily episodes of say NBC nightly news available, but not yet downloaded)... (but this is not a great solution as I am using iTunes through Plex, the Mac is mor a TV/Mediacenter for my family; Plex can access playlists and podcasts in iTunes, but obviously it cannot trigger iTunes to update, so I have to go out of Plex to update iTunes, very annoying)
How can I ge my my podcasts to be downloaded automatically by iTunes.
Thank you for any help!

Here is a screenshot of the phenomenon/problem... NBC Nightly News is not updated, even both the computer and iTunes are running constanly. Once I click update podcast, the podcast updates, so there is an update available.

Business area not updated in one plant

hi frends,while posting a document with moment type 543 through MB0a after GR i am not getting the business area in the acc doc in one of the plants....for other plant the business area is being fecthed...i tried dubugging found one FM k_cobl_check in fm cobl_codingblock_check where the business area is not getting updated....
please help...

I am working on ECC 6.0.
Document Splitting is Not activated in my system. Is it possible through any validation
Mann

Business Area not flowing automatically in Shipment Cost document

Hi there,
In transportation module, while creating shipment cost document, business area is not flowing automatically. Upon more exploration we found that plant is also not flowing, and may be because of that business area is not flowing. What can the posible reasons for plnt not flowing? Suggest solution.
Thanks and Regards,
Deepshikha

Dear Deepshikha,
Please check the Assign purchasing data settings in T_53 transaction with the combination of the plant.
Through this setting plant will flow in the shipment cost document.
I don't have idea about where the businees area field avail in the shipment cost document.
If so please chek the settings related to business area through this IMG path.
SPRO>IMG>Enterprise structure>Assignment>Business Area Account Assignment.
Define Rules By Sales Area
If Rule 1 is assigned then
Assign Business Area To Plant And Division
If Rule 2 is assigned then
Assign Business Area by Sales Area.
I hope it will help you,
Regards,
Murali.

After the download of the new version of numbers the cells with formulars are not updated automatically after changing values in cells in the formular. In the previous version this was done automatically. How to make it work again?

Downloaded new version of Numbers last night. Formulars in excisting spreadsheets are not working anymore.
Pls. Help.

You need to give a lot more information if you are to grt help. What are the formulas and how are you using them?

BLAORD, Payment term details are not updated automatically in ME31K

Hi,
Thru FM IDOC_INPUT_BLAORD, am posting contracts (IDOC type: BLAORD03). I am only passing terms of payment through E1EDK01-ZTERM. I am assuming that relevant data for the payment term will be picked up from configuration. I am not passing these values through the idoc.
ZBD1T     Cash (Prompt Payment) Discount Days
ZBD2T     Cash (Prompt Payment) Discount Days
ZBD3T     Cash (Prompt Payment) Discount Days
ZBD1P     Cash Discount Percentage 1
ZBD2P     Cash Discount Percentage 2
But these fileds are populated with zeros (initial values) in ME31K, please suggest any note?
Thanks.

Hi Julie,
Thanks for your reply..
Here the issue is, the user using Baseline date for two specific purpose.
1.Due day calculation-auditing purpose
2.Agning report
For due day calculation they recently enable the option "payment term from invoice in -OBA3".Due to active the function,system copy the payment term and baseline date from invoice to residual item.it means the residual item having baseline data as invoice date not posting date.
But for aging report purpose it has to be update posting date.
now user want to meet these both requirement .How can it possible .Please suggest.
Thank you
Regards
Dharma

Business area not picking up for substitution...

Hi
I have created susbstitution for GL account..for substituting business area for GL account....(tax GL account
Tax line item is automatically created in document.....i want business area to be pickep up for the same.
We want substitution create for Business area updating ;- When Document has 4 line item at the time of TAX and TDS line item the Business area not update, MIRO Document also not update the Business area.
Please reply
thanks

Dear Vijay,
Please kindly read the SAP note number 199886 Business area in tax line
In the value-added tax line items, the field "Business area" is NEITHER
automatically filled NOR can you enter a value manually.
Postings to VAT accounts must be made WITHOUT business area. The reason
for this is that the field "Business area" does NOT exist in the tax
data. Therefore,the advance return for tax on sales/purchases can also
only generate postings WITHOUT business area and these postings must
correspond exactly to the original tax postings in your account
assignments. Otherwise, the tax accounts would have steadily increasing
business area balances.
Unfortunately I must inform you that the business area is not available
for substitution because it can cause inconsistences in AM,CO and MM
modules.
Substituting the B.A.field is a modification to the standard SAP
system. To make the business area field substitutable you must have
written an ABAP to update table GB01 for the GSBER field, this is
all explained in SAP note 42615.
I hope this helps.
Mauri

MIRO - Business Area not getting updated in Vendor Line item

Hello friends,
I am posting Vendor invoice in MIRO transaction.
After Posting if i see the financial document generated,
Business area has not got updated in Vendor Line item.
What could be the problem ?
Please help me out.
Hari Prasath

Hi Kale,
Make sure the field Business area is not supressed in tx. OB14. for the GL account in line item 001.
On the other hand, have a look to the note and kba below:
41294 - Business area in customer/vendor item
Kba 1727802 - Business area not getting populated in sales/ purchase tax

HT4993 my emails are not updating itself automatically. I only get emails if i open the mail application in my iphone. How to update emails automatically?

my emails are not updating itself automatically. I only get emails if i open the mail application in my iphone. How to update emails automatically?

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode

Business Area not coming in FS10N layout.

Dear SAP Friends,
I am working in a client where "Document Splitting" was activated on the basis of "Business Area" from the 1st August,2008. In this client their is four business areas. When I am getting the balance sheet as per Business Area in F.01 every GL shown the amount as per business area & also a some of amount is shown under the not assigned head. Amount under the not assigned is total of document of having no business area.
Now my client wants that all not assigned amount should be distributed as per the business area & not assigned amount will come to zero.The field of business area is "GSBER".
Now for that I am testing it on development. I have selected on document having no business area and updated the table "BSEG" for filed "GSBER" for that business area manually through ABAP. When I am seeing the same document under FB03 the system shows the Business Area correctly which I have given in the table. But when I see the General Ledger balance in FS10N (In layout selected business area column) the same document does not give business area in that business area column. But when I select it for details it shown the business area in that document.
Now my issue is why this is happening ? or is their any another way to do this ?
Because i have to update all of documents of before 1st, August 2008 with no business area .
Please give any solution ASAP & for helpful answer points will be surely awarded.
Thanks & Regards in advance
Sandeep
Edited by: Sandeep on Dec 6, 2008 11:34 AM

Hi,
Touching a cluster table like BSEG thru ABAP is a tricky thing. You would need to work out all linkages to other tables for the data you are touching, would suggest a where used for field business area and update all other tables relevant to the data, like BSI* and BSA*.
For FS10N, the data is not read from BSEG but rather from the totals tables like GLT0.
Cheers

Time stamp does not update automatically

Hi, All. I want include the time stamp (yyyy-mo-dd-min-sec) in the file name. However, the value of the time stamp does not update automatically/synchronizes with the computer clock at each new run. I need to do it manually with the right click and update the time to the current.
How can I solve this? Thanks a lot in advance.

What does this have to do with NI counter/timer hardware?
What language are you using and what function are you using to get a timestamp? If the language is LabVIEW, then all you need is Get Date/Time in Seconds. If you are using a front panel Time Stamp control, then you are using the incorrect function.

Dates in Events do not update automatically

After iPhoto made events out of my photo library during conversion from from iPhoto06, there are often photos from several days in one "event". I can live with that most of the time, but in several instances I split events. Unfortunately, the dates of the original, unsplit event do not update automatically. This often results in a wrong order of events. If, e.g. I take out pictures from August 10th from an event with photo dates August 10th to August 13th, the original event still shows the starting date of August 10th, and orders the event between August 9th and August 11th.
The expected behaviour would be that the starting date of the modified event would change automatically to reflect the changes. This does not occur, and, worse, there is not even a possibility to change those dates manually.
Am I missing something important here, or is this an VERY annoying bug in iPhoto08?

I agree - but this is a user forum and we can NOT fix anything - only try to help either follow the correct procedures of (as in this case) identify a work around to use until Apple fixes the problem.
As far as I know the work around of creating a new event form one photo and moving the remaining photos to the new event is the ONLY way arround this problem right now.
Using the work around will accomplish what you need even though it should not be necessary. Complaining about on this forum will not accomplish anything - compalining directly to Apple might -- iPhoto menu ==> Provide iPhoto Feedback.
Larry Nebel
PS - and reading the thread prior to get the work around prior to adding "I have the same problem" would actually be a pretty good idea too!

Business area not capturing

Dear Experts
Business area not capturing for tax code while doing invoice verification.
Can anyone helpme
Regards
Kumar

Hi
Use t-code F.5D and F.5E for business area adjustment, Or else consult you FI Consultant
he Business area is never filled in automatic posting such as taxes or bank accounts. You have to customize the adjustment retroactively in the IMG. You will find it in "General ledger Accounting -> Business Transactions -> Closing -> Regrouping ..." Once you have set all the accounts require, in functional you have to run all the Regroup transactions (General Ledger -> Periodic Processing -> Closing -> Regroup -> Balance Sheet Adjustment ...)
This process ensures the zero balance per business area necessary for
creating business area balance sheets.

Business area not updating automatically.

Similar Messages

Maybe you are looking for