Business catalyst user registration
How does one setup (is it even possible) to set up two factor user registration in Business Catalyst.
i.e. The users registers and is sent an email with a link to validate that the user is using a valid email address.
Should not be the case.
The Email is the primary identify, if you are using the proper email field and not a custom field BC will only add the form data to a single CRM entry. You wont find there are multiple customers in the CRM with the same email.
A user can always fill in the same form, and new cases attached to them. There is no system email check on the field itself at this time. You just need to design how your site and registration flow works so people know not to keep registering.
Similar Messages
-
How do I transfer website from one business catalyst user to another?
Our Company website is currently being hosted on our web designers business catalyst in one of his 5 free slots. We want to transfer it to our own business catalyst so we can upgrade it to web marketing and maintain it ourselves. How do I do this? Thanks in advance!
If you are a paid partner contact support and they can guide you through the steps to transfer a site. If you are a free partner then there is no way to switch sites from one user to another, as sites cannot be transfered to a free partners. However, you could transfer all of the files over and re-launch your website. Would take a little bit of work but is doable.
-
How to create a Business Catalyst user WITHOUT sending an invitation
Hi, I have a customer that cannot receive any of the e-mail invitations from the BC system to set up a user role.
I can create the user on the BC system and send the invite, but the customer is not getting them.
Is there a way to set up the user on the system, with a user name and password, without having to use the e-mail invitation workflow?
Any help greatly appreciated.Hi RepulseMonkey
I can troubleshoot this for you but I'd need some more information. Id need the URL of the website so I can do some checks on the DNS setup.
Basically if you're not receiving emails it can be a few things. I'd be looking to check:
1. That your Domain Setup is set correctly. If it's set to Internal, when it's actually External then this can happen.
2. If it's externallly hosted then you should start by creating the SPF record that is required so your external mail server will trust mail sent from Adobes servers - Here's some instructions on adding an SPF record half way down this page - Business Catalyst Migration
To answer your question. YES. You can get around it. You can send the activation email to a different email address. Then once confirmed ask BC support to change it back. BUT we really recommend to get you DNS configured correctly in the first place. It's usually not hard.
Let me know if you're stuck. I can point you in the right direction and if you're really stuck PRETTY does consultation and support on this kind of thing.
[email protected] -
Perth Business Catalyst User Group
Our first meeting will be held on Wednesday 18 July, 6pm
Fortix
Central House, Level 1
Suite 5, 193 Guildford Rd
Maylands WA 6051
Our first meeting will be a "to get to know everyone" session with a discussion about what topics you would like to see discussed over the coming months.
Please join the group at http://perth-bc.groups.adobe.com/Hi RepulseMonkey
I can troubleshoot this for you but I'd need some more information. Id need the URL of the website so I can do some checks on the DNS setup.
Basically if you're not receiving emails it can be a few things. I'd be looking to check:
1. That your Domain Setup is set correctly. If it's set to Internal, when it's actually External then this can happen.
2. If it's externallly hosted then you should start by creating the SPF record that is required so your external mail server will trust mail sent from Adobes servers - Here's some instructions on adding an SPF record half way down this page - Business Catalyst Migration
To answer your question. YES. You can get around it. You can send the activation email to a different email address. Then once confirmed ask BC support to change it back. BUT we really recommend to get you DNS configured correctly in the first place. It's usually not hard.
Let me know if you're stuck. I can point you in the right direction and if you're really stuck PRETTY does consultation and support on this kind of thing.
[email protected] -
Creative Cloud and existing Business Catalyst partners - FAQ
This FAQ will cover topics related to Creative Cloud, for existing Business Catalyst users.
How can I signup for Creative Cloud?
Your Business Catalyst account should have been already updated right now with your Adobe ID. If you haven’t updated it yet, visit the Adobe ID – Business Catalyst account update FAQ.
What benefits do I get with Creative Cloud ?
In addition to acccess to all Creative Suite programs, Lightroom and others in one place, a Creative Cloud membership enables you to host up to five Business Catalyst websites. These sites will be webBasics sites. For a full comparison between plans, see this page. If you purchase Muse or Dreamweaver as individual products in Creative Cloud, you can host one Business Catalyst website for each of them.
My web design shop has several employees, each with their own Business Catalyst login with access our Partner Portal. Do we need Adobe IDs for each of our employees?
Yes. Since these users are partner users, they need to use an Adobe ID. Visit the Adobe ID – Business Catalyst account update FAQ for more details
I have a paid website that I want to host using my Creative Cloud subscription. Can I do this?
This is not possible. You need to create a new webBasics temporary website in Business Catalyst and push it live.
Can I move a trial/live Creative Cloud site under a different Creative Cloud subscription?
This is not possible right now.
Do I get any discount if I upgrade a Creative Cloud website to a higher Business Catalyst plan such as webMarketing or webCommerce?
Currently there are no upgrade discounts for Creative Cloud members.
What are the limitations of the webBasics websites that come with Business Catalyst and Creative Cloud membership?
You will be limited to 100 MB of storage and 1 additional user (such as your customer). You will not get email, SMS or newsletters for this web plan.
Can I buy more users? Can I buy more space? Can I buy email?
We are working on creating this workflow but at this point we don’t have an exact release date for this feature.
How can I upgrade the webBasics websites that come with Creative Cloud to a higher Business Catalyst plan?
We are working on creating this workflow but at this point we don’t have an exact release date for this feature.
Do I get any discount for purchasing more websites if I am a Creative Cloud subscriber?
Right now there is no discount for Creative Cloud members.
If I am an existing Paid Partner and I have a few employees for whom I paid Creative Cloud subscriptions, how many websites can I claim?
You will have 5 websites for each employee. However, you will pay different licenses for all of them. Before purchasing these licenses, please contact Adobe Support to add these users to your partner portal. After you have added users to your partner portal, you will be able to access all the websites from it.
*NOTE: If you have already add employees to your partner portal, then everything will work automatically.
If you don’t want to access all your websites from the same Partner Portal, you don’t have to do anything.
How can I set permissions for my employees regarding these websites? What permissions can I set?
This will be part of a later Creative Cloud that will be launched this year.
What happens if I cancel or stop paying my Creative Cloud subscription?
Each live website (among the free websites under your Creative Cloud subscription) will stay live for an additional 30 days. This gives you time to decide whether you want to keep the site(s) live or remove them. You will be prompted to upgrade your website to a regular Business Catalyst site plan.
After 30 days, your website will enter in temporary mode. When entering the temporary mode, your custom domain name will be removed from the website. In order to reactivate it, pay for your website directly with Business Catalyst.
If you are inactive on a temporary website, it will automatically be deleted.
=== Dreamweaver CS6 FAQ ===
I have logged in on Dreamweaver CS6 and I cannot see my partner site. How can I edit it?
This is a known issue. For paid partners (Standard or Premium) you can use the workaround described below:
export one of your sites as an .ste file
Open the .ste file in another text editor, and modify it
Replace the :
httpaddress with your partner's site URL address
secureURL with your partner site secure URL
siteid with the site ID of your partner site
Save the .ste file with another name
Import this .ste file into Dreamwaver, choose a local root folder
Please take a look at Brad's blog post here for more detailed steps on how to import your partner site in Dreamweaver.
I'm trying to login to Dreamweaver CS6 with my Business Catalyst credentials, and it doesn't work. What credentials do I need?
You can login to Dreamweaver CS6 with your Adobe ID. If you haven't merged your BC account with an Adobe ID account, you'll need to merge it and then you should be able to login.
How do I access sites in Dreamweaver with an Adobe ID other than the one linked to my Creative Cloud or Dreamweaver subscription?
Dreamweaver defaults to using the Adobe ID from your subscription to avoid the inconvenience of logging in multiple times. To use a different ID, just click the "Logout" button in the lower-right hand corner of the Business Catalyst panel and log in with a different Adobe ID:
You'll need to have a file open in an existing BC site for the "Logout" button to be visible. Logging out will not affect the Adobe ID used in conjunction with your Dreamweaver subscription. To change the Adobe ID for your subscription, click Help -> Deactivate.At this point the upgrade workflow is not functional just yet, as mentioned here: http://forums.adobe.com/docs/DOC-2153
So the webBasics Creative Cloud cannot be upgraded directly to the webBasics+ level for now.
But a workaround for this case would be to re-publish your Dreamweaver/Muse project (I suppose you've used one of these solutions to build the site in the first place, right?) in a new trial/temporary site -> let us know what is the URL of that site (don't push it live) -> we will change the site plan from our backend to webBasics+ -> you will be able to publish it using the webBasics+ site plan.
Please note that this is going to be a separate charge, besides your Creative Cloud subscription. The monthly fee for webBasics+ will be $12.21/month, as mentioned here: http://www.adobe.com/products/business-catalyst/buying-guide-subscriptions.html
Another way to use the webBasics+ plan would be to simply trigger a new trial site here: https://syd.worldsecuresystems.com/PartnerPortal/FreeTrialSignup.aspx#splash with the same Adobe ID as the one used to buy the Creative Cloud subscription and take that site live separately. -
Business Catalyst e-commerce (allow user to cancel his subscription)
Hi
My Client is using e-commerce bussiness catalyst and is using Adobe Muse to design the website. For the payment process my client is planning on using the built-in Business Catalyst e-commerce module with PayPal as the payment processing gateway.My client also wants the customer to be able to cancel his own magazine subscription without having to contact him to request a cancel. Is this something that adobe bussiness catalyst is able to accomplish ?
Thank you very much
Just in case something was unclear here is the original message.
We're building a site in Adobe Muse. Our product is a monthly subscription, with a one-time licensing fee. We will host on Adobe Business Catalyst. We need a check-out solution using either PayPal Web Standard -- OR -- the built-in Business Catalyst e-commerce module with PayPal as the payment processing gateway.
The check-out module needs 3 options:
1) Charge $695 one time and also set up a monthly payment of $39 starting 30 days after the one time charge
2) Charge $695 one time and also set up a monthly payment of $59 starting 30 days after the one time charge
3) A promo code field that allows the customer to start the subscription in 90 days instead of 30 (the promo code will change frequently; it needs to be easily editable by us)
The customer will need to be able to cancel the subscription at any time (without contacting us)."Hi Prashant,
Thank you for the quick reply. However please note that we are not using anything related to CRM. We are only using SAP E-Commerce for SAP ERP (SAP EHP1 FOR SAP NETWEAVER 7.0) with ECC 6.0 back end.
With that said, we are not looking to use E-Commerce for self registration, but relying on a CWA front end for registration/authentication.
The main question is: Can we allow creation of a B2B user with a portal user ID that is different than the back end ECC user ID in our scenario (no CRM)?
thanks!
Patrick D'Anna -
Can I transfer my domain registration to Adobe Business Catalyst?
Can I transfer my domain registration to Adobe Business Catalyst?
Thank you. I have just renewed with my current domain registrar Thank you
for you prompt and direct answer to my question.
On Wed, Feb 18, 2015 at 6:15 PM, Sanjit_Das <[email protected]> -
How to add a user when Muse site is uploaded without Business Catalyst?
Hello,
I have uploaded a Muse site for my client on her own ftp server. But how can I add her as a "inbrowser editor", so that she can manage the site when needed? Or is it only possible to add a user when I upload the site on the Business Catalyst host?
Thanks!Hi,
The June 2014 update to Muse enables In-Browser Editing for Muse sites hosted with third-party (non-Adobe) providers.
See https://helpx.adobe.com/muse/using/whats-new.html#In-browser%20Editing%20enhancements for specifics.
Abhishek -
Business Catalyst access permissions for different users
Hi there,
We want to have specific people have access to specific areas of a website we are developing and are considering using BC.
For example:
- Distributors will have their own section to access resources such as training manuals, videos and service agreements.
- Service techs - will have their own section to access resources such as service manuals, instal guides etc.
How does Business Catalyst allow different people to access different areas? Is it by:
- Password?
- People in the database are tagged, so they use their profile to access their own area?
- other?
If it is possible, could we be pointed in the direction of how to set this up?
Thanks in advance for any help.
Cheers,
AndrewSounds to me like Secure Zones will do this for you...
You can create as many secure zones as you like and asign (or use registration forms) anybody to any zone. Ofcourse each zone can have it's own content, theme, etc...
Here's a good place to start:
http://helpx.adobe.com/business-catalyst/partner/add-secure-area-your-site.html -
Business catalyst, managing users
At the Business Catalyst pricing plans says, i can have up to 10 users, so 2 questions:
1. What does a user is: a site administartor, editor, etc...?
2. If so, what if i have more than 10 users administrating and editing a site? what if i have more than 100 people administrating and editing a portal?
ThanksHi,
1. on BC Pricing, users are referred to Admin users per site.
2. You can buy additional users, to see the pricing please refer to this article
Partners
Do let me know if you have any question. -
Business Catalyst Help | Manage site users
This question was posted in response to the following article: http://helpx.adobe.com/business-catalyst/using/site-users.html
Things seem to have gone crazy here. I cannot log into the client site using my partner portal password and username.
My client user which I set up as an admin, is saying that she cannot upload images saying she doesn't have the authority to do that and she cannot import items, with a different message.
Also, I see now way to modify or delete her as a user from the partner portal. Going fom my portal to the client site to details.
Jeff
PS the ticket system is also down. -
2014 SAP Business ByDesign Users Conference - Early Bird Registration
2014 SAP Business ByDesign Users Conference
The 3rd Annual SAP Business ByDesign Users Conference will be held at the fabulous Mirage Hotel & Casino in Las Vegas, October 26-29, 2014
Register Today - Save $100+ on Ticket & Accommodations
http://sapbydesignconference.comDon't miss Kscope11, June 26-30, in Long Beach, CA!
Symposiums are often synonymous with extra fees, but not at Kscope11!
When you register for Kscope, you can attend any sessions at any of the six symposiums offered, in addition to the hands-on training courses, 250+ technical sessions, and much more.
Instead of additional fees, Kscope’s symposiums are synonymous with deep-dive, highly technical day-long events that are not offered anywhere else. This is the place to be to find out directly from those developing the technologies what is coming up in the next year! Our speakers are ready to wow you with their insight into: Application Express, BI, Oracle EPM, Database Development, Fusion Middleware, and MySQL.
Don’t forget - Early Bird Registration ends March 25!
Congratulations to Tracy Collins who won two tickets to the Aquarium of the Pacific and dinner for two in Long Beach, just by registering for the conference!
This month, make sure to Like ODTUG on Facebook for the chance to win a free one-year ODTUG membership. If you register this month (or have already registered), you could win an iPod Touch (and you can use it at Kscope to access our mobile app. Shhhh, app announcement coming soon!).
www.kscope11.com
Edited by: NatalieD on Mar 3, 2011 4:01 PM -
Can I test a new version of my website on Business catalyst before it goes live? I don't want to replace the current version until I am sure it works properly.
Hi bgeorge,
You have the option at any time to publish your project to a new trial site. Make sure to select in the publishing pop-up the Options button, and from "Publish to:" field scroll to the top where you have "New Site". Whenever you want to publish to your existing site, follow the same steps and click on the site you want to publish to.
Currently the publish process is down due to a scheduled maintenance on Business Catalyst so you won't be able to do it right now. Check the status page later to see when it is completed: http://status.businesscatalyst.com
Regards,
Cristian -
Muse, Business catalyst and email forms
Dear users,
I'd have a request about business catalyst and email forms.
I made a simple web site for a test by Adobe Muse. In the contatc area I add an email form of Muse which requirs business catalyst. I subscibe a trial period with catalyst, tested it in its host and it was ok. Now I'm going to create a new site which is going to be published in a personal wed address (www.domainname.com) Is it enought to pay for a basic subscription of business catalyst, or do I need additional stuffs? Please consider that the site will be hosted in a different web space than catalyst
I thank you in advacne for your kind collaboration
Best regards
Fabrizio ZambelliThank you for your kind reply. Unlucky there are 2 problems with my explanition: I'm not so confidential with wed hosting stuffs and english!!!!!
I have a domain (www.example.com) which is hosted and registred in Italy by a service like Godaddy.
I downloaded the web site which I created with Muse on that domain and it works. I made a page which uses the email form widget from Muse and obviously, it says to me that BC is required to work. Basicaly I'm looking for a suggestion on how to get it working. Thanks agains expecially for your patience!!!!!!!! Fab -
Photo Gallery thumbnails in business catalyst render in different sizes in different browsers
Photo Gallery thumbnails in business catalyst render in different sizes in safari and chrome but are fine in firefox. What is the issue with Safari? I have tried the different algorithm options such as fill_proportional etc and firefox is the only browser that displays correctly. I thought safari was the most standards compatible browser - what's the problem here?
Hi,
If you have seperate XML file but with the same basic structure then you can change the XML a Spry dataset refers to and regenerate the spry region without reloading the full page.
So on my photo gallery page I can change the album the photos are shown from via the seturl sprydata function as below. dsPhotos being my Spry dataset that points to the relevant XML dataset with my image references and captions etc. My XML is actually dynamically generated from Picasa RSS feeds (and RSS feeds are XML) but the principle will be the same with your static XML.
First I add an event listener for when someone clicks on an album (the li tag within my div with the id "albums" holds a photo and title for each album.)
function Albums()
var myalbums = Spry.$$("#albums li", "TabbedPanels1")
var rows = dsAlbums.getData();
var setListener = function( element, value )
Spry.Utils.addEventListener( element, "click", function(){ showAlbum( value ); },false );
for( var i = 0, length = myalbums.length; i < length; i++ )
setListener( myalbums[i], i );
Then this is the code which changes the photo album to be shown. (when the user clicks the relevant album)
function showAlbum(i)
pauseShow();
pImage = 'No';
var rows = dsAlbums.getData();
var albumid = rows[i]["albumid"];
var url = "xml/PicasaAphotoFeed.asp?albumid=" + albumid;
dsPhotos.setURL(url);
dsPhotos.loadData();
var rowcount = dsAlbums.getRowCount() - 1;
var nextalbum;
var navnext;
var n;
The page is here www.thehmc.co.uk/photo5.html is you want to see it in context.
In your case showAlbum would switch between Frank.xml or Wolfie.xml depending on how you decide to name your xml datasets.
Regards
Phil
Maybe you are looking for
-
OCI8 compile errors on SLES 10
I'm stuck. New to Linux, so the error messages are greek. I've googled for days. Can anyone decipher the issue here? Thanks in advance for any help!! Used RPM to install instant client 10.2.0.4 (user didn't want v11). PHP 5.2.5 installed. Used yast t
-
Why isn't the enter key working in InDesign?
I have installed Adobe InDesign CS6 as creative cloud but pressing the enter key on the numbers keypad doesn't move my text to the next page as it should but just drops it to the next line. What can I do to resolve this?
-
Inserting Records in an Array and using a constructor with it
I badly need help on this! Please please please! I have been studying java for a short time only. Anyway, here goes: My project requires the following: Employee inputs the no. of video in the shelf. They have four classifications: Drama, Comedy, Acti
-
Problems installing and uninstalling Cannon 620 printer
I tried to install a Cannon 620 printer. It seemed to go ok, showed up on the printer list when I tried to send a job, but it wouldn't come online and print. I fiddled around (bad idea) and changed the printer sharing parameters, and now whenever I
-
Upgrade of 10.3.6 WLS with ADF libs to 12.1.3
Hi All, I am migrating a 10.3.6 environment which has ADF libraries installed. So: 1). I installed 12.1.3 ADF runtime on my 12.1.3 environment. 2). Then ran reconfig.sh to upgrade. I am getting below errors; ************ Preparing... Reconfiguring C