Problems installing and uninstalling Cannon 620 printer

I tried to install a Cannon 620 printer. It seemed to go ok, showed up on the printer list when I tried to send a job, but it wouldn't come online and print. I fiddled around (bad idea) and changed the printer sharing parameters, and now whenever I try to go into system preferences, printer/fax, it freezes and I have to force quite. Same with other apps when I try to do something with the printer (like word). I tried to uninstall, but can't get to the driver to uninstall it, as it is in systems preferences. Any suggestions for how to uninstall even though I can't get into the system pref printer options? Thank you!

Hi Kappy, thanks for the advice. Unfortunately, the problem is I can't even get into Print & Fax to select the installed printer, as soon as I click on it I get the spinning wheel and not responding, and have to force quit.
The freezing up is also now happening in word (which I used to try to print a document to the new printer). Any other thoughts? Thank you!

Similar Messages

(sorry for double thread) I have problems installing and uninstalling

sorry that i posted 2 things in one day but whenever i uninstall After effects it gives me a message at the end that says "some problems occured while uninstalling please look below" there are no messages below and i cant do anything about it. also after i try uninstalling its still there in the uninstall/remove programs and if i try to uninstall that it says "choose the stuff you want to uninstall" and it will usually give me a list of things but it doesnt. and if i proceed to uninstall it odesnt do anything and stops responding. When i tried to install it the first time it said said there were somethings that werent installed please restart and retry it again and the more info button shows a list of things that went wrong like templates, 3 party content, 16x9 dv movie, footage and projects, all of those things have an error and some sort of fatal error i think 1609 or something i dont want to reinstall Vista i just did 2 days ago and AAE has never done this before please reply i appreciate it.

Well, the lesson here is to never use system restore with activated Adobe apps. Doing so changes the fingerprint of the harddrive and the licensing system and the installer do not particularly like this and Vista's own security stuff certainly doesn't make things easier. if you haven't already, run the CS3 Clean Script and remove evbery shred orf Adobe you have on the system, then re-install. If it still refuses to properly acknowledge your serial, then indeed calling support is the only way to get this sorted out. This stuff falls into the "black box full of magic" category, that noone else can help you with, unfortunately.
Mylenium

Problems installing and uninstalling Flashplayer 64bit 11.1.102.55. Please Help?

Hi Adobe Forum.
I am having serious difficulties installing the latest version of flash player (which apparently I HAVE TO install). I 'click here' to download, click 'run' and it starts installing. Then tells me to close Internet Explorer (which I do) and everything that could be using Flashplayer. I then click retry and nothing happens at all. I cancel the download, checked my control panel and looked at my list of programs, it hasn't installed properly. I then go to uninstall programs and Flashplayer 64bit 11.1.102.55 is there. I try and uninstall it and again it tells me to close Internet Explorer. Again I close everything down and AGAIN nothing happens. I have read and done all the possible problems with settings, etc, but nothing changes. I'm not paying Adobe for a product update that they have imposed on me. I just want to watch videos. Can someone please help me. My computer is a Samsung Windows 7 64bit and I am using Internet Explorer 64bit. NB. I have just purchased Norton Internet Security. Could a setting in that be causing the issue?
Thank you!

Go to this site: http://www.adobe.com/software/flash/about/
In the Version Information box, what version is installed?
What files are in C:\Windows\System32\Macromed\Flash and C:\Windows\SysWOW64\Macromed\Flash ?

Problems installing and uninstalling Java

I am using XP as my operating system, and I was trying to install Java the other day and it starts to install, but I keep getting an error message saying that I already have have this version of JRE installed. Please uninstall the product through your add/remove programs utility before reinstalling. When I go to add or remove programs and try to uninstall it. it tells me: you already have have this version of JRE installed. Please uninstall the product through your add/remove programs utility before reinstalling! Then I get another error message that says fatal error during installation. Either way I go I can not do anything with Java. I also can not afford to do a complete system recovery because I will lose a lot of important software.Thanks in advance for your help.

you should try to do a kind of "manual" deinstallation, since the registry entries of your system seem to be inconsistent.
backup your registry, backup your jre dir, clean your registry with regcleaner (or another registry cleaner), i.e. remove the jre related entries. try installing again...
(i'm not responsible for any damages to your system)!
by the way, do you have reasons to assume that your system is lying when telling you, that the jre version is alreasdy installed?

Problems installing and uninstalling itunes

I migrated from another desktop to this new win 7. When I tried to run iTunes it said that I needed to upgrade to 64-bit. I downloaded the 64 bit version and when I tried to install it I got this message: "This iTunes installer is intended for 32-bit versions of Windows. Please download and install the 64-bit iTunes installer instead. The iTunes file I downloaded is: iTunes64Setup, the version is 9.2.0.61
I have tried the troubleshooting steps described in the iTunes support. I get the same message when I try to uninstall iTunes.

The iTunes file I downloaded is: iTunes64Setup, the version is 9.2.0.61
Yes, that's a 64-bit installer.
With the message you're getting from it, usually the installer has gotten damaged during the download. What Web browser were you using for the download? Does it make any difference if you use Firefox instead of IE, or vice versa?

Problem with installing and uninstalling applicati...

hi all,
I have a problem with installing or uninstalling apps on 808. When i try to install an application through Nokia suite or when trying to run the application file from the phone's memory the screen freezes and becomes unresponsive but the 3 phone buttons work just fine. I have to shut down the phone and the screen becomes responsive again. Anything available to help me wiith this situations as I cannot use any of the apps I have. Any help much appreciated.
Regards
Alex

You are not alone. Im also having the same issue because we do alot of install and uninstall apps. This is the bad point of symbian. But I tired to install the latest FP2 it will be slightly abit smoother now. So you have the latest version now but did you tired to restore any backup yet? It might be the setting on when you restore that affect it. The feezing should be shorten on FP2 but it will still remain there depending on the type of apps from what I experience.
I hope they will provide multiple function to uninstall apps since it will go through a long process to uninstall apps 1 by 1.
Reason is because some apps will go through process like preparing install, process install, finalising install which take away your control for that few seconds or a minute instead runnning in background mode. Its not convenient to uninstall more apps.

After downloading new version of Firefox 4 I am unable to use touch pad for scrolling. I have tried installing and uninstalling the new version but this problem has always been occuring.

after downloading new version of Firefox 4 I am unable to use touch pad for scrolling. I have tried installing and uninstalling the new version but this problem has always been occuring. I do not know how to fix this problem so I always return to the old version.

If you have problems with updating or with the permissions then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
Download a new copy of the Firefox program and save the DMG file to the desktop
* Firefox 5.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Trash the current Firefox application to do a clean (re-)install
* Install the new version that you have downloaded
Your profile data is stored elsewhere in the Firefox Profile Folder, so you won't lose your bookmarks and other personal data.
* http://kb.mozillazine.org/Profile_folder_-_Firefox

I have repeatedly installed and uninstalled Microsoft Silverlight, I have followed every thing out there and uninstalled from various folders. It still states the program is there and it won't run. This is also happening with my coupon printer that word

I have repeatedly installed and uninstalled Microsoft Silverlight, I have followed every thing out there and uninstalled from various folders. It still states the program is there and it won't run. This is also happening with my coupon printer that word

Copied from a page that helped me:
I followed someone else's advice and found all the silverlight files in "INVISIBLE FILES".
In the Finder, choose File > Find or press Command (⌘)-F.
From the far-left pop-up menu (labeled “Kind”), choose Other.
In the list of search attributes, select the “File invisible” checkbox, and then click OK.
In the related menu, choose Invisible Items.
once loaded go to folder Private
then to folder VAR
then folder db
then folder Receipts
scroll to any com.microsoft.silverlight item and delete. there are a bunch of them.
close, restart and install silverlight.

Having major problem cannot use my arrow to open anything on page only about 2 in down from browser will it work I have installed and uninstalled firefox

arrow does not open anything 2 in. below the toolbar works fine below that I've installed and uninstalled Firefox several times will not work using Firefox11 very hard to access a lot of things especially when ordering online cannot submit any info required

If the inoperable button or link is near the top of the page....
Recently, the Yahoo Toolbar and the Babylon extension have been reported to cause that problem. They seem to overlap invisibly over the top of the web page display. If you have either or both, uninstall or disable them/it, or see if an update is available that solves the problem.
*Uninstall Yahoo Toolbar --> http://help.yahoo.com/l/us/yahoo/toolbar/toolbar8/general/general-07.html
*Uninstall Babylon --> http://support.babylon.com/index.php?/Knowledgebase/Article/View/177/0/uninstall-babylon-software
*See --> http://support.mozilla.com/en-US/kb/Uninstalling+add-ons
*See --> http://support.mozilla.com/en-US/kb/Cannot%20uninstall%20an%20add-on
*See --> http://kb.mozillazine.org/Uninstalling_toolbars
If that does not solve the problem:
*See --> [http://support.mozilla.org/en-US/kb/Troubleshooting+extensions+and+themes Troubleshooting extensions and themes]
*See --> [http://support.mozilla.org/en-US/kb/Troubleshooting+plugins Troubleshooting plugins]
*See --> [http://support.mozilla.org/en-US/kb/Basic+Troubleshooting Basic Troubleshooting]
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

How can I download itunes when I get the following errors...have installed and uninstalled a dozen times with various fixes...b noir for example and used Revo to clean up..ituneshelper did not install correctly error 7

How can I download itunes when I get the following errors ..ituneshelper did not install correctly error 7..I .have installed and uninstalled a dozen times with various fixes...b noir for example and used Revo to clean up.
This has been a problem for 6 weeks now, I retry when I have time and patience and use my other laptop which is also Windows 7 and runs with no problem.
Every attempt fails when all seems fine on the desktop and I try to log on to Itunes I get the errors.
Any help greatly appreciated.
billymac

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features(Later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (If this won't uninstall press on)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
See also HT1925: Removing and Reinstalling iTunes for Windows XP or HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
Should you get the error iTunes.exe - Entry Point Not Found after the above reinstall then copy QTMovieWin.dll from:
C:\Program Files (x86)\Common Files\Apple\Apple Application Support
and paste into:
C:\Program Files (x86)\iTunes
The above paths would be for a 64-bit machine. Hopefully the same fix with the " (x86)" omitted would work on 32-bit systems with the same error.
tt2

Error on iTunes library file after installing and uninstalling 8.1

I downloaded 8.1 after being prompted. After installing 8.1, I could not synch my IPod. I uninstalled 8.1, reinstalled 8.02, and now I am getting this error.
Does anyone have any ideas on how to correct this? I have about 39 Gigs of music, and will have problems trying to restore this to a hard drive.

I'm not sure if this is the right place to ask this; i'm new; after i installed the latest version of itunes, i get a library error message each time i open it up; it tells me i have an invalid library, then it creates a backup and calls it 'damaged1'; i have installed and uninstalled itunes 3 times now; each time, i erase all traces of past libraries, so that i start 'new'; the first time i open up itunes, i don't get the error message; i do absolutely nothing with the program, just close it; wait 5 seconds; open it up, and immediately i get the error message, and it creates a 'damaged1' back up; each time i open it, it creates a newer backup, and keeps adding 'movie, genius, dj' etc to my playlist; if i open it 10 times, i've got 10 of all these folders - HELP ME!

I have installed and uninstalled i tunes to windows vista several times and i keep getting an error message of no apple support

I have tried numerous times to install and uninstall i tunes on windows vista and I keep getting an error message of no apple support. Anyone have a solution to this?

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version, or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2

I have recently tried to access my itunes account but am unable to. I installed and uninstalled the new download several times. I know I have a balance from itunes cards on my account as I received an email recently. I have an ipod shuffle

I have tried to access the itunes store by many different means. I know I have account balance as I put in 2 gift cards back in March and have not used them all. I recently installed and uninstalled itunes several times but I still cannot open it on my computer. When plugging in my ipod shuffle it does not automatically load either although my computer says it's working correctly.

Click on the "Start" button. Click "Run." Type the word "cmd" in the open box. When the DOS screen comes up, type "netsh winsock reset." Press "Enter." Type "exit" to close the DOS window and go back to Windows.
Restart the computer.
Read more: http://www.ehow.com/how_2125133_do-winsock-reset.html#ixzz2kyccghec

Problems installing and starting on Windows 7 64bit. error message - The file "i Tunes Library.itl" cannot be read because it was created by a newer version of iTunes.

Hi I'm having problems installing and starting itunes program on Windows 7 64bit. After install the following error message is flagged - The file "i Tunes Library.itl" cannot be read because it was created by a newer version of iTunes. Would really appreciate any pointers!

Never mind sorted it out lol. Somebody did a system restore of a week or so. I had done the update during that time and it was lost. Just redownloaded itunes from the internet and its working fine now.

Excel is throwing error when it click print : 'No printers are installed. To install a printer click the File tab, and then click Print. Click No Printers Installed, and then click Add Printer. Follow the instructions in the Add Printer dialog box'

Excel is throwing error when it click print : 'No printers are installed. To install a printer click the File tab, and then click Print. Click No Printers Installed, and then click Add Printer. Follow the instructions in the Add Printer dialog box'
Word, and powerpoint application are working fine.
Environment : Windows 7 64-bit, MS Office 2013 64-bit
Steps to recreate
(i) Create new user account and add to any group ( do not log on using this
account)
(ii) runas /user:<new user account> <fullpath>\excel.exe
it will ask password so enter on command prompt
(iii) open any excel document and click File->Print
(iv) verify result (it is failing) it pop ups below error
Error:`Microsoft Excel
No printers are installed. To install a printer click the File tab, and then click
Print. Click No Printers Installed, and then click Add Printer. Follow the
instructions in the Add Printer dialog box.

Sorry for late reply i was not at work
I have a default set excel is still throwing error. Interestingly winword , powerpoint and publisher are working fine. I am able to print from all office applications except Excel.
Probably excel behaves differently from other office applications.
Probably it is a bug in excel
Workaround : Log on to a system once using newly created account then runas excel using this account then print works fine.
It means something in user profile should be configure to run excel print operation. Could you please somebody help what I need to configure in user profile that makes print operation success?

Problems installing and uninstalling Cannon 620 printer

Similar Messages

Maybe you are looking for