Business Contact Manager Plugin does not install successfully in Outlook 2010 Professional Plus

I work for a company that has provided me with a volume licensed version of Microsoft Office Professional Plus 2010. We do a lot of customer tracking so I looked into options to utilize Outlook and found out about the Business Contact Manager plugin. I tried
to download and install it from the public site but was informed that the public version would not work and that I would need to request a compatible version from my company that they could access through a contracted download portal.
I worked with support and they were able to locate the file and install it on my computer. Once I tried to start working with it though I found that there was no Business Contact Manager tab or any of the additional functionality that I needed.
I contacted support to follow up and they again tried several times to install the plug in, but although there was never any error message the installation also never resulted in the business contact manager tab being added or in any reference to it being
added to my list of plugins.
Any help would be greatly appreciated.

Hi,
Go to Control Panel -> Programs and Features, can you see any version of Business Contact Manager installed? If yes, please uninstall it first from there, then delete the registry keys below(if they exist):
ImportantThis
section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry
before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry,
http://windows.microsoft.com/en-US/windows7/Back-up-the-registry
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Office\Outlook\Addins\microsoft.businesssolutions.ecrm..outlookaddin..connect.1
HKEY_CURRENT_USER\Software\Microsoft\Office\Outlook\Addins
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Business Solutions eCRM
HKEY_CURRENT_USER\SOFTWARE\\Microsoft\Business Solutions eCRM
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\Business Contact Manager
Then we can try performing a clean boot to install Business Contact Manager again. In Clean Boot Mode, it can eliminate the conflict by background programs as much as possible. Check if you can install it properly:
http://support.microsoft.com/kb/929135
Regards,
Melon Chen
TechNet Community Support

Similar Messages

How do I correct Error 1402 when installing 64-bit Office 2010 Professional Plus?

During installation of Office Professional Plus (64-bit) on a 64-bit Dell PC with 4 GB RAM, installation fails about 75 percent of the way through resulting in file roll back. Display: Error 1402 "Setup cannot open the registry key ('UNKNOWN\Components\DA42.
. .EE8\7E577. . .F4E80')"
I tried registry cleaning (CCleaner) and "regedit" plus Windows Installer Cleanup Utility to remove the 32-bit version of Officer 2007 Professional, cleaned the cache again, re-booted and attempted to re-install Office Pro Plus 2010 but got the same error
1402 message. Clearly, I have not corrected the registry error and do not know how to do more than what I described here. Any ideas out there?
Thank you!

To all that encounter the same problem...use this advice from michelsmith!
I have just had numerous dramas over the last few weeks with Microsoft office 2010 professional plus. My first issue was a skype virus I infected my computer with which stuffed around with security settings and hid all my folders.....then I tried to uninstall
Office and reinstall with no success (as it hid all my systems icons...I'm no computer person so thought this was the best way to rectify it).
Sometimes it would install then would come up with registry errors 1402 othertimes it wouldn't even get that far.
Make sure you run the command as Administrator and copy and paste the above in...then wulahhh!!!
Tried to install again and worked perfectly!
Thankyou thankyou thankyou....I'm never one to write on these things...let alone join up....but this advice just saved me from reinstalling my OS which I was hoping would solve the problem....(phewwww :) )
So a comment saying thankyou was needed...
Gobilino.

MS Outlook 2010 Professional Plus - Word couldn't send mail because of a MAPI failure: "Operation not supported".

I'm receiving the following error when attempting to email directly out of MS Word 2010
The environment: MS Windows XP SP3. MS Office 2010 Professional Plus. Steps to error: I'm attempting to send the document as an email using File > Save & Send > Send Using E-mail > Send as Attachment.
About 8 months ago I had an identical error in MS Office 2010 Beta and did troubleshooting for a few days and was able to resolve it. I'm kicking myself because I didn't take note as to what finally fixed it. Last week I uninstalled Beta and installed
MS Office 2010 when we got our volume copy/key.
The same error occurs in our service desk application Track-It! 5.0 when attempting to email a requestor directly out of the program using a shortcut key; when I resolved this error in MS Office 2010 Beta it resolved it both for MS Word 2010 Beta and Track-It!
5.0.
Attempts thus far to resolve:
Reinstalled MS Office 2010
Repair of MS Office 2010
System Restore to prior to uninstallation of MS Office 2010 Beta (did not go well, reversed System Restore)
Thanks.
Allen Darrah, MCP

Hi,
Try to
rename the Mapi32.dll file, and then start the Fixmapi.exe program:
Click
Start, and then click Search.
Click
All files and folders.
In the
All or part of the file name box, type mapi32.dll, and then click
Search.
When the search process is complete, right-click the
Mapi32.dll file, and then click Rename.
Type
Mapi32.old, and then press ENTER.
Click
Start a new search, and then click All files and folders.
In the
All or part of the file name box, type fixmapi.exe, and then click
Search.
When the search process is complete, double-click
Fixmapi.exe to start the repair process.
Follow the on-screen instructions to complete the repair process.
If this does not work, try to run the program as administrator. Go to the location of WINWORD.EXE and create a shortcut from it by right-clicking - then choose
'compatibility mode' and select 'Run as administrator, save your shortcut to the desktop.
Best Regards,
Sally Tang

Windows Media Player plugin does not install on a fresh install of Firefox 15. This is a real issue with new students.

I have them go to the correct site:
plugin download page on Interoperability Bridges.
My only options are:
1. Have them move some files over manually; which isn't feasible with students who are technically challenged.
2. Have them install an earlier version of Firefox. 11 is the last known good version that accepts the WMP install. The problem I am finding with this is even though I tell them not to update before installing WMP somehow they still manage to do it. A lot of times they don't know how to tell me what version of ANY browser they are using.
Firefox is one of the few browsers that work with our LMS well, but this plug problem is a real issue.
This only pertains to any student who has never had Firefox on their computer prior to 11.
Thanks in advance.

I noticed it after 11, however with 12 students students experienced problems with puzzles in Angel LMS. We had people roll back to 11.
13 came out and that's when the trouble started. I usually stay in beta so I can get a idea of what's working. Once again I had people roll back to 11.
I logged into a system here I had not logged into before and did a fresh install of 11 and I was able to recreate the problem myself.
Getting people on 11 is a little harder this semester because I had to locate the 11 install and send that along with the plugin to new users. The 11 install likes to force the 15 update so they have to get the plugin installed right away. Sometimes the concept is a little much for some people.
Edit: 12 might have been okay, since we were rolling back anyway. I don't recall any issues with WMP the few weeks students had been using it.
Edit 2: I do remember trying to search these forums for the issue and someone posted that they had been experiencing the same problems with 12 beta (at the time it was beta) and I think it was explained as being a beta issue and it never went anywhere else.

64-bit Win 7 SCANNER software does not install successfully for wired-networked HP Officejet L7750

My client has an Officejet L7750 on his network (in the same 192.168.111.nn subnet), and it functions OK as a printer. I downloaded and installed each of the three sets of L7750 software designated as working with 64-bit Windows:
HP Officejet Pro Basic Print and Scan Driver
HP Officejet Pro Full Feature Software and Driver
HP Officejet Basic Driver - IT Professional Use Only
The end-result is the same with each. The software runs for a time, finds the printer, continues the install, then runs for about 10 minutes "configuring the printer". After a time, it displays a dialog box saying that the installation failed. Sure enough, there is no software to run the scanner, but the printer still works. (I also ran the install a couple of times and the printer could not be found. When I continued installation anyway, the software left an icon on the desktop with some pretty unhelpful info for troubleshooting.)
After each failed install, I followed HP's documented procedure to remove the incomplete software.
My client needs to use the printer's scanning function, and occasionally send faxes, but cannot do so without a working L7750. Of course, Windows 7 cannot even recognize a networked scanner. Suggestions? Do I have to move the printer to the USB port on one of the computers to have a working scanning function? To do so would be mighty inconvenient, and essentially negate the networked capability of the printer. Can the L7750 operate simultaneously as both a netwkred device and a USB device on a computer?
Thank you. This one has me really stumped... Ben

Hey @RobAhl,
Welcome to the HP Support Forums!
I understand that you're not able to scan properly with Windows 7 64 bit. As you already know, while the Windows scan and Fax program is handy for basic scans, it is not practical if you need to scan PDF Files. I would be more than happy to assist you with your issue; however, I'm going to need a bit more information first.
What colour Laserjet is this in regards to?
How is the Laserjet connected to your computer?
In the meantime, on the HP Support Website there are Full Feature Software and Driver downloads available. Should your Laserjet have Windows 7 64 bit support than you should be able to go to the HP website and download the appropriate drivers as they are required in order to have full scan functionality.
Drivers & Downloads
Please let me know what you find out. Best of luck!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

Mountain Lion Does not install on MacBook Air 2010

Installing stopped on: (remaining time 17 mins). I have waited 1hr, but nothing happens.
After reboot, this situation repeated 3 times!
Please, help! What I should do to restore my computer?
Thanks.

Restart your Mac and immediately press the Command and R keys. Your Mac should start from the Lion recovery partition.
Open Disk Utility and click your OS X Lion volume, typically named "Macintosh HD". Note: If FileVault 2 is enabled, you will need to click "Unlock" on the toolbar, and then enter your admin password to unlock the drive.
Click the "Repair Disk" button and let Disk Utility complete a repair of the drive.
After this, restart. If the same issue is happening, boot with command R again and reinstall the OS from there.

Synching Contacts for Outlook 2003 with Business Contact Manager

Is there anyway to get the ipod Nano to sync with a business contact manager contacts list.
When I choose to sync it doesn't show me any groups or contact lists. It does sync my normal contacts but not my business contacts in business contact manager. DOes anyone know if Ipodsync will do this?

From Business Contacts, you can drag a business contact and drop it on the contacts database. This creates a copy of the business contact in the traditional Outlook Contacts Folder which will synch to your BlackBerry. It's manual and not a perfect solution but it works.

Business Contact Manager 2013 Issue with drop down menus not working correctly and BCM disappearing.

We upgraded from BCM 2007 to BCM 2013. Now the BCM disappears from Outlook occasionally and the drop down menus are confused. for instance when accessing the drop down for phone numbers, the user selects company - but the field for TTY/TDD comes up.
Shows fields that don't exist etc.
The client is using Office 2013 Pro Premium from Office 365 Small Business Premium subscription and BCM downloaded from Microsoft website.
Please let me know what the support avenues are for this product.
Chris Smith

Hi,
This issue may be caused since the BCM was not installed properly.
Please go to Control Panel -> Programs and Features, find Business Contact Manager for Microsoft Outlook and Uninstall it.
Then go to
http://www.microsoft.com/en-us/download/details.aspx?id=36513, download the right version of BCM(32bit or 64bit) and install it.
If issue persists, you may provide the screenshots of the issue, post them to SkyDrive and share it via a link:https://skydrive.live.com/, then we will have a better understanding on the issue.
Thanks,
Melon Chen
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

How could I install outlook with business contact manager 2007 in windows 8.1 system?

Recently I got a new 8 win pc, then I tried to instal Outlook with business contact manager 2007 but I couldn´t
The reason: sql server is not compatible. Would you please let me know how to fix that problem?

Hi CarlosZC,
Since the issue regards Outlook with business contact manager 2007. I suggestion you post the question in the Outlook forums at
http://answers.microsoft.com/en-us/office/forum/outlook?tab=question&status=all&auth=1. It is appropriate and more experts will assist you.
According to your description, we need to verify the version of the SQL Server, usually the warning of compatibility issues applies to all SQL Server Express editions when installing Business Contact Manager (BCM) 2007 on Windows 7/8. The incompatibility
was fixed in SQL Server 2008 Service Pack1 and SQL Server 2005 Service Pack 3 on Windows 7.
There is a similar issue about compatibility message when installing BCM 2007 on Windows 7, you can review the following article.
http://blogs.msdn.com/b/rathomas/archive/2009/10/09/compatibility-message-when-installing-bcm-2007-on-windows-7.aspx
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

Business Intelligence SE does not install discoverer

Hi,
Does anybody recently download Business Intelligence SE from Oracle site and install successfully ?
I installed it, but it does not install the discoverer component. I checked the CD stage sub folder, and it does not have discoverer component. I also checked it from the Oracle Installer, still cannot find the discoverer component.
Anybody know what's wrong? Thanks.

The software did install the plus and viewer, but you have to go through the a web page to access them. Before I tried to find the short cut in the program menu. Checked the setupinfo.txt file in the install directory. It tells what URL to access discoverer. From that page you can access the Plus and viewer.

Business Contact Manager add-in crashes Outlook when EMET 5.0 is installed

We have Outlook 2010 and Outlook 2013, and some of our users have Business Contact Manager (BCM). Once we installed EMET 5.0 with the Recommended settings, the BCM add-in would crash Outlook. EMET logs no messages to the Event Log. The
only entry in the Event Log is Event 1023 from .Net Runtime stating:
.NET Runtime version 2.0.50727.5485 - CLR: Fatal Execution Engine Error (000007FEF798600A) (80131506)
I'm guessing no one else uses BCM and EMET as these forums and the rest of the Internet are devoid of any related posts. We've tried toggling DEP, SEHOP, ASLR settings based on other posts about problems with other Outlook add-ins and EMET without
any change in behavior. We have tried removing the OUTLOOK.EXE entry from the list of apps in EMET, but Outlook always loads with a green check mark in the "Running EMET" column.
Are there any settings for Outlook in EMET so that it will work with the BCM add-in?
Assuming #2 is too complicated, is there any way to keep EMET from running Outlook as an EMET-protected process? As I mentioned above, I've removed it from the App list in EMET but EMET still insists OUTLOOK.EXE is "Running EMET".
Any help would be appreciated. Otherwise, we're scrapping EMET.
-Nate

If you remove the Outlook.exe entry from the list of apps and it still shows as protected the changes you have made are not active. I guess that the changes you make when you toggle a protection for the Outlook process are also not active for the same reason.
Did you check if your changes are activated by using the 'EMET_Conf.exe --list' command from an elevated command prompt?
Do you use a Group Policy to configure EMET? In EMET 4.1 you must use 'EMET_Conf.exe --refresh' if you made a change in the policy settings and after the policies are applied. In EMET 5.0 the service takes care of that but maybe there is a delay or the group
policy settings are overruling the settings from the GUI and therefore also the changes you make through the GUI.
W. Spu

Business Contact Manager fails to install component Mssml.biz

Windows 8.1 with office 2013, attempting to install x.86 32 bit version of BC upgrade 2010. each install fails to install this component mssml.biz. Have attempted everything published on this problem i could find, clean install, run fix it, deleted everything
SQL in programs, cleaned out registry, reboot, installed SQL express as stand alone then BC, all fail with same error. Unit is 100% up to date on all patches.

Hi,
Thanks for posting your question here, I will be assisting you on this issue.
For getting a better understanding of what has got in the way of installation, we may need to collect installation logs during BCM Setup:
For Windows Installer Setup log
            drive:\setup.exe
/l*v c:\Setup_log_name
The MSDE Setup log
          MSDE Setup log is automatically created during Setup. You can find it under temp folder with
          name like
Msde_setup_number.log (Ex. Msde_setup_1108685580.log)
          click
Start, point to Run, type %temp%, and then click
OK.
- The MSDE configuration log
The MSDE configuration log is named Cnfgsvr.out. the Cnfgsvr.out log located one of the
           following
folders, depending on the version of BCM you are using:
              . Business Contact Manager:
                    C:\Program Files\Microsoft SQL Server\MSSQL$MICROSOFTBCM\Install
             . Business Contact Manager Update:
                   C:\Program Files\Microsoft SQL Server\MSSQL$MICROSOFTSMLBIZ\Install
Please send the log through mail to:
[email protected]
As you’ve tried a lot trouble shooting steps already, let not repeating those steps till we have the log.
This Article is a detailed reference for log collecting and some trouble shooting steps which you might already tried.
Thanks for your understanding.

Have tried to install icloud 4.0 for windows and again it does not allow syncing with outlook 2013 calendar and contact using windows 8.1 and IOS 8.02 (unexpected error)? I thought itunes 12.0 and icloud 4.0 would solve issue but still same result.

I have tried to install icloud 4.0 for windows and again is does not allow syncing with outlook 2013 calendar and contact, using windows 8.1 and IOS 8.02 (get - unexpected error)?

Having same issues. had been syncing every few days with outlook 2007 contacts and calendar but since updated to 4.0.2 and latest itunes I get an error that it is unable to sync. I can't seem to find any solution.

Cannot install Business Contact Manager - trying to run another application

Hello
I am trying to install Business Contact Manager for Outlook 2013, but every time when I run the installation file and the file extraction starts, a window opens trying to install a completely different programme - Wunderlist, which I had on my computer.
I deleted all of the files related to Wunderlist and tried to install BCM again, but the same thing happens over and over again. I took a snapshot of the error message. After every attempt, I find a file of the type ClickOnce Application Deployment Manifest
related to Wunderlist C:/Users/rg/AppData/Local/Microsoft/Windows/TemporaryInternetFiles/Content.IE5/T5VFSWN6/Wunderlist.application
Is this a problem with BCM or Wunderlist? Has anybody had a similar problem? Any suggestions how I can solve this issue?

Hi,
Make sure you downloaded Business Contact Manager from Microsoft, if no, please download Business Contact Manager from this link below:
http://www.microsoft.com/en-us/download/details.aspx?id=36513
I actually haven't seen the same issue before, you may perform a clean boot to install BCM, this will help forbid the interference by other programs:
http://support.microsoft.com/kb/929135
Regards,
Melon Chen
TechNet Community Support

TS1538 My ipod touch will not connect to itunes. I reset the ipod touch. uninstalled itunes and installed it. Turned off firewall however the device manager still does not show Apple mobile device usb. What should i do next? I have windows 7.

My ipod will not connect to itunes. I reset the ipod touch. uninstalled itunes and installed it. Turned off firewall however the device manager still does not show Apple mobile device usb. What should i do next? I have windows 7.

See:
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

Business Contact Manager Plugin does not install successfully in Outlook 2010 Professional Plus

Similar Messages

Maybe you are looking for